KRUPS revision 1.43
1# $NetBSD: KRUPS,v 1.43 2007/06/02 17:16:12 uwe Exp $ 2# From: NetBSD: GENERIC,v 1.197 2006/12/04 23:43:35 elad Exp 3# 4# Krups (JavaStation-NC) machine description file 5# 6 7include "arch/sparc/conf/std.sparc" 8 9options INCLUDE_CONFIG_FILE # embed config file in kernel binary 10 11#ident "KRUPS-$Revision: 1.43 $" 12 13maxusers 32 14 15## System kernel configuration. See options(4) for more detail. 16 17 18# Options for variants of the Sun SPARC architecure. 19# We currently support three architecture types; at least one is required. 20options SUN4M # sun4m - SS10, SS20, Classic, etc. 21 22# microSPARC-IIep is PCI based sun4m (JavaStation-NC, CP1200, etc) 23# This option selects if SUN4M means "normal" 4m or IIep. Kernels 24# with this option turned on will refuse to work on normal 4m. 25options MSIIEP # microSPARC-IIep 26 27# XXX: uwe: PROM location conflicts with kernel VA space !!! 28options PROM_AT_F0 29makeoptions TEXTADDR=E8004000 30 31 32## System options specific to the sparc machine type 33 34# Blink the power LED on some machines to indicate the system load. 35options BLINK 36 37 38#### System options that are the same for all ports 39 40## Root device configuration: change the ?'s if you are going to use a 41## nonstandard root partition (other than where the kernel is booted from) 42## and/or nonstandard root type (not ffs or nfs). Normally this can be 43## automagically determined at boot time. 44 45config netbsd root on ? type ? 46 47## System call tracing (see ktrace(1)). 48options KTRACE 49#options SYSTRACE # system call vetting via systrace(1) 50 51## Collect statistics on kernel malloc's and free's. This does have a 52## significant performance hit on slower machines, so it is intended for 53## diagnostic use only. 54#options KMEMSTATS 55 56## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2)) 57options SYSVMSG # System V message queues 58options SYSVSEM # System V semaphores 59#options SEMMNI=10 # number of semaphore identifiers 60#options SEMMNS=60 # number of semaphores in system 61#options SEMUME=10 # max number of undo entries per process 62#options SEMMNU=30 # number of undo structures in system 63options SYSVSHM # System V shared memory 64#options SHMMAXPGS=1024 # 1024 pages is the default 65options P1003_1B_SEMAPHORE # p1003.1b semaphore support 66 67## Loadable kernel module support; still under development. 68#options LKM 69 70#options USERCONF # userconf(4) support 71#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 72options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 73 74## NFS boot options; tries DHCP/BOOTP then BOOTPARAM 75options NFS_BOOT_BOOTPARAM 76#options NFS_BOOT_BOOTP 77options NFS_BOOT_DHCP 78 79 80#### wscons options 81 82# builtin terminal emulations 83options WSEMUL_SUN # sun terminal emulation 84options WSEMUL_VT100 # VT100 / VT220 emulation 85options WSEMUL_DEFAULT="\"vt100\"" 86 87# customization of console and kernel output - see dev/wscons/wsdisplayvar.h 88options WSDISPLAY_CUSTOM_OUTPUT # color customization from wsconsctl(8) 89#options WS_DEFAULT_FG=WSCOL_WHITE 90#options WS_DEFAULT_BG=WSCOL_BLACK 91#options WS_DEFAULT_COLATTR="(0)" 92options WS_KERNEL_FG=WSCOL_GREEN 93#options WS_KERNEL_BG=WSCOL_BLACK 94options WS_KERNEL_COLATTR=WSATTR_HILIT 95 96# customization of console border color 97options WSDISPLAY_CUSTOM_BORDER # custom border colors via wsconsctl(8) 98#options WSDISPLAY_BORDER_COLOR=WSCOL_BLUE # default color 99 100# compatibility to other console drivers 101options WSDISPLAY_COMPAT_PCVT # emulate some ioctls 102options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls 103options WSDISPLAY_COMPAT_USL # VT handling 104options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 105 106options FONT_GALLANT12x22 # PROM font look-alike 107 108#options WSKBD_EVENT_AUTOREPEAT # auto repeat in event mode 109#options WSKBD_USONLY # strip off non-US keymaps 110 111# see dev/pckbport/wskbdmap_mfii.c for implemented layouts 112#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" 113 114# allocate a number of virtual screens at autoconfiguration time 115#options WSDISPLAY_DEFAULTSCREENS=4 116 117 118#### Debugging options 119 120## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at 121## serial console break or keyboard reset, where the PROM would normally 122## intercept. DDB_HISTORY_SIZE adds up/down arrow command history. 123#options DDB # kernel dynamic debugger 124#options DDB_HISTORY_SIZE=100 # enable history editing in DDB 125#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 126 127## You may also use gdb, on another computer connected to this machine over 128## a serial port. Both KGDB_DEV and KGDB_DEVRATE should be specified; 129## KGDB_DEV is a dev_t encoded device number of the serial port to use, where 130## the minor device number encodes the PROM enumeration of the serial ports, 131## i.e.: 132## 0xc00 = ttya, 0xc01 = ttyb, 0xc02 = ttyc, 0xc03 = ttyd. 133## (Note: ttyc and ttyd are available only on some sun4 models) 134#options KGDB # support for kernel gdb 135#options KGDB_DEV=0xc01 # kgdb device number (this is `ttyb') 136#options KGDB_DEVRATE=38400 # baud rate 137 138 139## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file), 140## such that gdb(1) can be used on a kernel coredump. 141 142#makeoptions DEBUG="-g" 143makeoptions CPUFLAGS="-mcpu=supersparc" 144 145 146## Adds code to the kernel that does internal consistency checks, and will 147## cause the kernel to panic if corruption of internal data structures 148## is detected. 149#options DIAGNOSTIC # extra kernel sanity checking 150 151## Enable (possibly expensive) debugging code that may also display messages 152## on the system console 153#options DEBUG 154 155options MIIVERBOSE # verbose PHY autoconfig messages 156 157## `INSECURE' turns off the kernel security level (securelevel = 0 always). 158## This allows writing to /dev/mem, loading kernel modules while multi-user, 159## and other insecurities good only for development work. Do not use this 160## option on a production machine. 161#options INSECURE 162 163## `FDSCRIPTS' allows non-readable but executable scripts by providing a 164## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS', 165## which implies FDSCRIPTS, allows scripts to be set-user-id using the same 166## opaque file mechanism. Perl calls this "secure setuid scripts." 167 168#options FDSCRIPTS 169#options SETUIDSCRIPTS 170 171## Options for compatibility with previous releases foreign system binaries. 172## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up 173## additional user-level utilities or system configuration files. See 174## compat_sunos(8) and compat_svr4(8). 175 176options COMPAT_43 # 4.3BSD system interfaces 177options COMPAT_10 # NetBSD 1.0 binary compatibility 178options COMPAT_11 # NetBSD 1.1 binary compatibility 179options COMPAT_12 # NetBSD 1.2 binary compatibility 180options COMPAT_13 # NetBSD 1.3 binary compatibility 181options COMPAT_14 # NetBSD 1.4 binary compatibility 182options COMPAT_15 # NetBSD 1.5 binary compatibility 183options COMPAT_16 # NetBSD 1.6 binary compatibility 184options COMPAT_20 # NetBSD 2.0 binary compatibility 185options COMPAT_30 # NetBSD 3.0 binary compatibility 186options COMPAT_40 # NetBSD 4.0 binary compatibility 187options COMPAT_SUNOS # SunOS 4.x binary compatibility 188options COMPAT_SVR4 # SunOS 5.x binary compatibility 189options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 190 191## File systems. You probably need at least one of FFS or NFS. 192file-system FFS # Berkeley Fast Filesystem 193file-system NFS # Sun NFS-compatible filesystem client 194file-system KERNFS # kernel data-structure filesystem 195file-system NULLFS # NULL layered filesystem 196file-system OVERLAY # overlay file system 197file-system MFS # memory-based filesystem 198file-system FDESC # user file descriptor filesystem 199file-system UMAPFS # uid/gid remapping filesystem 200#file-system LFS # Log-based filesystem (still experimental) 201file-system PORTAL # portal filesystem (still experimental) 202file-system PROCFS # /proc 203#file-system CD9660 # ISO 9660 + Rock Ridge file system 204file-system UNION # union file system 205#file-system MSDOSFS # MS-DOS FAT filesystem(s). 206#file-system CODA # Coda File System; also needs vcoda (below) 207file-system PTYFS # /dev/pts/N support 208#file-system TMPFS # Efficient memory file-system 209#file-system UDF # experimental - OSTA UDF CD/DVD file-system 210 211## File system options. 212#options NFSSERVER # Sun NFS-compatible filesystem server 213#options QUOTA # FFS quotas 214#options FFS_EI # FFS Endian Independent support 215#options SOFTDEP # FFS soft updates support. 216options FFS_NO_SNAPSHOT # No FFS snapshot support 217 218## Network protocol support. In most environments, INET is required. 219options INET # IP (Internet Protocol) v4 220options INET6 # IPV6 221#options IPSEC # IP security 222#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 223#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 224#options IPSEC_DEBUG # debug for IP security 225#options GATEWAY # packet forwarding ("router switch") 226#options MROUTING # packet forwarding of multicast packets 227#options PIM # Protocol Independent Multicast 228#options DIRECTED_BROADCAST # allow broadcasts through routers 229options ISO,TPIP # OSI networking 230#options EON # OSI tunneling over IP 231#options NETATALK # AppleTalk (over Ethernet) protocol 232options NTP # Network Time Protocol in-kernel support 233#options PPS_SYNC # Add serial line synchronization for NTP 234options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs. 235options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device 236options IPFILTER_LOOKUP # ippool(8) support 237#options IPFILTER_DEFAULT_BLOCK # block all packets by default 238options PPP_BSDCOMP # Add BSD compression to ppp device 239options PPP_DEFLATE # Add deflate (libz) compression to ppp device 240options PPP_FILTER # Add active filters for ppp (via bpf) 241 242 243 244#### Main bus and CPU .. all systems. 245mainbus0 at root 246cpu0 at mainbus0 247 248#### Bus types found on SPARC systems. 249 250msiiep0 at mainbus0 # microSPARC-IIep PCIC, timer, ... 251 252mspcic0 at msiiep0 # PCI tree 253pci0 at mspcic0 254options PCIVERBOSE 255#options PCI_CONFIG_DUMP # hangs reading IGA1682 config past offset 64 256 257ebus* at pci? dev ? function ? # ebus devices 258 259 260#### Standard system devices -- all required for a given architecture 261 262# timer is part of ms-IIep PCIC 263timer0 at msiiep0 264 265## ds1287 TOD clock at EBus 266rtc* at ebus? 267 268#### Serial port configuration 269 270## NS16x50 serial chips and clones. 271com* at ebus? 272 273 274#### Disk controllers and disks 275 276## A disk-like interface to files. Can be used to create floppy, CD, 277## miniroot images, etc. 278 279#pseudo-device vnd 280#options VND_COMPRESSION # compressed vnd(4) 281 282## Memory disk device, used on boot floppies with compressed 283## kernel-plus-root-disk images. 284 285#pseudo-device md 1 286 287 288#### Network interfaces 289 290## Happy Meal Ethernet 291hme* at pci? dev ? function ? # network "hme" compatible 292 293# MII/PHY support 294qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs 295 296## Loopback network interface; required 297pseudo-device loop 298 299## SLIP and CSLIP interfaces, for IP over a serial line. 300#pseudo-device sl 301 302## PPP, the successor to SLIP. See pppd(8). 303#pseudo-device ppp 304 305## PPP over Ethernet (RFC 2516) 306#pseudo-device pppoe 307 308## Network "tunnel" device, allowing protocol stacks to run in the userland. 309## This is used by the third-party user-mode "ppp" program, and others. 310#pseudo-device tun 311#pseudo-device tap # virtual Ethernet 312 313## Generic L3 over IP tunnel 314#pseudo-device gre # generic L3 over IP tunnel 315 316## Berkeley Packet Filter, required to run RARPD. A generic C-language 317## interface that allows selective examining of incoming packets. 318pseudo-device bpfilter 319 320#pseudo-device carp # Common Address Redundancy Protocol 321 322## IP Filter, used in firewall and NAT applications. See ipnat(8) for 323## one example of the use of the IP Filter. 324#pseudo-device ipfilter 325 326## for IPv6 327#pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 328#pseudo-device faith # IPv[46] tcp relay translation i/f 329#pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 330 331## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 332#pseudo-device vlan 333 334#### Audio and video devices 335 336## /dev/audio support 337audiocs* at ebus? # SUNW,CS4231 338audio* at audiocs? 339 340# wscons 341pckbc* at ebus? # PC keyboard controller 342pckbd* at pckbc? # PC keyboard 343pms* at pckbc? # PS/2 mouse for wsmouse 344igsfb* at pci? dev ? function ? 345wsdisplay* at igsfb? console ? 346wskbd* at pckbd? console ? 347wsmouse* at pms? mux 0 348 349 350#### Other device configuration 351 352## Pseudo ttys, required for network logins and programs like screen. 353 354pseudo-device pty # pseudo-terminals 355 356## Random device, used to implement /dev/random (a source of random noise), 357## and generate randomness for some kernel formulae. 358 359pseudo-device rnd 360 361# a pseudo device needed for Coda # also needs CODA (above) 362#pseudo-device vcoda 4 # coda minicache <-> venus comm. 363 364# wscons pseudo-devices 365pseudo-device wsmux # mouse & keyboard multiplexor 366pseudo-device wsfont 367 368pseudo-device clockctl # user control of clock subsystem 369pseudo-device ksyms # /dev/ksyms 370 371#pseudo-device pf # PF packet filter 372#pseudo-device pflog # PF log if 373#pseudo-device fss 4 # file system snapshot device 374 375#options FILEASSOC # fileassoc(9) 376 377# Veriexec 378# 379# a pseudo device needed for veriexec 380#pseudo-device veriexec 1 381# 382# Uncomment the fingerprint methods below that are desired. Note that 383# removing fingerprint methods will have almost no impact on the kernel 384# code size. 385# 386#options VERIFIED_EXEC_FP_RMD160 387#options VERIFIED_EXEC_FP_SHA256 388#options VERIFIED_EXEC_FP_SHA384 389#options VERIFIED_EXEC_FP_SHA512 390#options VERIFIED_EXEC_FP_SHA1 391#options VERIFIED_EXEC_FP_MD5 392 393#options PAX_MPROTECT=0 # PaX mprotect(2) restrictions 394 # (for static binaries only for now) 395