KRUPS revision 1.39
1# $NetBSD: KRUPS,v 1.39 2006/08/26 20:26:56 christos Exp $
2# From: NetBSD: GENERIC,v 1.180 2005/09/10 19:20:50 jmmv Exp
3#
4# Krups (JavaStation-NC) machine description file
5#
6
7include 	"arch/sparc/conf/std.sparc"
8
9options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
10
11#ident 		"KRUPS-$Revision: 1.39 $"
12
13maxusers	32
14
15## System kernel configuration.  See options(4) for more detail.
16
17
18# Options for variants of the Sun SPARC architecure.
19# We currently support three architecture types; at least one is required.
20options 	SUN4M		# sun4m - SS10, SS20, Classic, etc.
21
22# microSPARC-IIep is PCI based sun4m (JavaStation-NC, CP1200, etc)
23# This option selects if SUN4M means "normal" 4m or IIep.  Kernels
24# with this option turned on will refuse to work on normal 4m.
25options 	MSIIEP		# microSPARC-IIep
26
27# XXX: uwe: PROM location conflicts with kernel VA space !!!
28options 	PROM_AT_F0
29makeoptions	TEXTADDR=E8004000
30
31
32## System options specific to the sparc machine type
33
34# Blink the power LED on some machines to indicate the system load.
35options 	BLINK
36
37
38#### System options that are the same for all ports
39
40## Root device configuration: change the ?'s if you are going to use a
41## nonstandard root partition (other than where the kernel is booted from)
42## and/or nonstandard root type (not ffs or nfs).  Normally this can be
43## automagically determined at boot time.
44
45config		netbsd	root on ? type ?
46
47## System call tracing (see ktrace(1)).
48options 	KTRACE
49#options 	SYSTRACE	# system call vetting via systrace(1)
50
51## Collect statistics on kernel malloc's and free's.  This does have a
52## significant performance hit on slower machines, so it is intended for
53## diagnostic use only.
54#options 	KMEMSTATS
55
56## System V compatible IPC subsystem.  (msgctl(2), semctl(2), and shmctl(2))
57options 	SYSVMSG		# System V message queues
58options 	SYSVSEM		# System V semaphores
59#options 	SEMMNI=10	# number of semaphore identifiers
60#options 	SEMMNS=60	# number of semaphores in system
61#options 	SEMUME=10	# max number of undo entries per process
62#options 	SEMMNU=30	# number of undo structures in system
63options 	SYSVSHM		# System V shared memory
64#options 	SHMMAXPGS=1024	# 1024 pages is the default
65options 	P1003_1B_SEMAPHORE # p1003.1b semaphore support
66
67## Loadable kernel module support; still under development.
68#options 	LKM
69
70#options 	USERCONF	# userconf(4) support
71#options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
72options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel
73
74## NFS boot options; tries DHCP/BOOTP then BOOTPARAM
75options 	NFS_BOOT_BOOTPARAM
76#options 	NFS_BOOT_BOOTP
77options 	NFS_BOOT_DHCP
78
79
80#### wscons options
81
82# builtin terminal emulations
83options 	WSEMUL_SUN		# sun terminal emulation
84options 	WSEMUL_VT100		# VT100 / VT220 emulation
85options 	WSEMUL_DEFAULT="\"vt100\""
86# different kernel output - see dev/wscons/wsdisplayvar.h
87options 	WS_KERNEL_FG=WSCOL_GREEN
88#options 	WS_KERNEL_BG=WSCOL_BLACK
89options 	WS_KERNEL_COLATTR=WSATTR_HILIT
90# compatibility to other console drivers
91options 	WSDISPLAY_COMPAT_PCVT		# emulate some ioctls
92options 	WSDISPLAY_COMPAT_SYSCONS	# emulate some ioctls
93options 	WSDISPLAY_COMPAT_USL		# VT handling
94options 	WSDISPLAY_COMPAT_RAWKBD		# can get raw scancodes
95
96options 	FONT_GALLANT12x22		# PROM font look-alike
97
98# see dev/pckbport/wskbdmap_mfii.c for implemented layouts
99#options 	PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
100# allocate a number of virtual screens at autoconfiguration time
101#options 	WSDISPLAY_DEFAULTSCREENS=4
102
103
104#### Debugging options
105
106## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at
107## serial console break or keyboard reset, where the PROM would normally
108## intercept.  DDB_HISTORY_SIZE adds up/down arrow command history.
109#options 	DDB			# kernel dynamic debugger
110#options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
111#options 	DDB_ONPANIC=1		# see also sysctl(8): `ddb.onpanic'
112
113## You may also use gdb, on another computer connected to this machine over
114## a serial port.  Both KGDB_DEV and KGDB_DEVRATE should be specified;
115## KGDB_DEV is a dev_t encoded device number of the serial port to use, where
116## the minor device number encodes the PROM enumeration of the serial ports,
117## i.e.:
118## 0xc00 = ttya, 0xc01 = ttyb, 0xc02 = ttyc, 0xc03 = ttyd.
119## (Note: ttyc and ttyd are available only on some sun4 models)
120#options 	KGDB			# support for kernel gdb
121#options 	KGDB_DEV=0xc01		# kgdb device number (this is `ttyb')
122#options 	KGDB_DEVRATE=38400	# baud rate
123
124
125## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file),
126## such that gdb(1) can be used on a kernel coredump.
127
128#makeoptions	DEBUG="-g"
129makeoptions	CPUFLAGS="-mcpu=supersparc"
130
131
132## Adds code to the kernel that does internal consistency checks, and will
133## cause the kernel to panic if corruption of internal data structures
134## is detected.
135#options 	DIAGNOSTIC	# extra kernel sanity checking
136
137## Enable (possibly expensive) debugging code that may also display messages
138## on the system console
139#options 	DEBUG
140
141options 	MIIVERBOSE	# verbose PHY autoconfig messages
142
143## `INSECURE' turns off the kernel security level (securelevel = 0 always).
144## This allows writing to /dev/mem, loading kernel modules while multi-user,
145## and other insecurities good only for development work.  Do not use this
146## option on a production machine.
147#options 	INSECURE
148
149## `FDSCRIPTS' allows non-readable but executable scripts by providing a
150## pre-opened opaque file to the script interpreter.  `SETUIDSCRIPTS',
151## which implies FDSCRIPTS, allows scripts to be set-user-id using the same
152## opaque file mechanism.  Perl calls this "secure setuid scripts."
153
154#options 	FDSCRIPTS
155#options 	SETUIDSCRIPTS
156
157## Options for compatibility with previous releases foreign system binaries.
158## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up
159## additional user-level utilities or system configuration files. See
160## compat_sunos(8) and compat_svr4(8).
161
162options 	COMPAT_43	# 4.3BSD system interfaces
163options 	COMPAT_10	# NetBSD 1.0 binary compatibility
164options 	COMPAT_11	# NetBSD 1.1 binary compatibility
165options 	COMPAT_12	# NetBSD 1.2 binary compatibility
166options 	COMPAT_13	# NetBSD 1.3 binary compatibility
167options 	COMPAT_14	# NetBSD 1.4 binary compatibility
168options 	COMPAT_16	# NetBSD 1.6 binary compatibility
169options 	COMPAT_20	# NetBSD 2.0 binary compatibility
170options 	COMPAT_30	# NetBSD 3.0 compatibility.
171options 	COMPAT_SUNOS	# SunOS 4.x binary compatibility
172options 	COMPAT_SVR4	# SunOS 5.x binary compatibility
173options		COMPAT_BSDPTY	# /dev/[pt]ty?? ptys.
174
175## File systems.  You probably need at least one of FFS or NFS.
176file-system	FFS		# Berkeley Fast Filesystem
177file-system	NFS		# Sun NFS-compatible filesystem client
178file-system	KERNFS		# kernel data-structure filesystem
179file-system	NULLFS		# NULL layered filesystem
180file-system 	OVERLAY		# overlay file system
181file-system	MFS		# memory-based filesystem
182file-system	FDESC		# user file descriptor filesystem
183file-system	UMAPFS		# uid/gid remapping filesystem
184#file-system	LFS		# Log-based filesystem (still experimental)
185file-system	PORTAL		# portal filesystem (still experimental)
186file-system	PROCFS		# /proc
187#file-system	CD9660		# ISO 9660 + Rock Ridge file system
188file-system	UNION		# union file system
189#file-system	MSDOSFS		# MS-DOS FAT filesystem(s).
190#file-system	CODA		# Coda File System; also needs vcoda (below)
191file-system	PTYFS		# /dev/pts/N support
192#file-system	TMPFS		# experimental - Efficient memory file-system
193
194## File system options.
195#options 	NFSSERVER	# Sun NFS-compatible filesystem server
196#options 	QUOTA		# FFS quotas
197#options 	FFS_EI		# FFS Endian Independent support
198#options 	SOFTDEP		# FFS soft updates support.
199options 	FFS_NO_SNAPSHOT	# No FFS snapshot support
200
201## Network protocol support.  In most environments, INET is required.
202options 	INET		# IP (Internet Protocol) v4
203options 	INET6		# IPV6
204#options 	IPSEC		# IP security
205#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
206#options 	IPSEC_NAT_T	# IPsec NAT traversal (NAT-T)
207#options 	IPSEC_DEBUG	# debug for IP security
208#options 	GATEWAY		# packet forwarding ("router switch")
209#options 	MROUTING	# packet forwarding of multicast packets
210#options 	PIM		# Protocol Independent Multicast
211#options 	DIRECTED_BROADCAST	# allow broadcasts through routers
212options 	ISO,TPIP	# OSI networking
213#options 	EON		# OSI tunneling over IP
214#options 	NETATALK	# AppleTalk (over Ethernet) protocol
215options 	NTP		# Network Time Protocol in-kernel support
216#options 	PPS_SYNC	# Add serial line synchronization for NTP
217options 	PFIL_HOOKS	# Add pfil(9) hooks, intended for custom LKMs.
218options 	IPFILTER_LOG	# Add ipmon(8) logging for ipfilter device
219options 	IPFILTER_LOOKUP	# ippool(8) support
220#options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
221options 	PPP_BSDCOMP	# Add BSD compression to ppp device
222options 	PPP_DEFLATE	# Add deflate (libz) compression to ppp device
223options 	PPP_FILTER	# Add active filters for ppp (via bpf)
224
225
226
227#### Main bus and CPU .. all systems.
228mainbus0 at root
229cpu0	at mainbus0
230
231#### Bus types found on SPARC systems.
232
233msiiep0	at mainbus0	# microSPARC-IIep PCIC, timer, ...
234
235mspcic0	at msiiep0	# PCI tree
236pci0	at mspcic0
237options 	PCIVERBOSE
238#options 	PCI_CONFIG_DUMP	# hangs reading IGA1682 config past offset 64
239
240ebus*	at pci?	dev ? function ?		# ebus devices
241
242
243#### Standard system devices -- all required for a given architecture
244
245# timer is part of ms-IIep PCIC
246timer0	at msiiep0
247
248## ds1287 TOD clock at EBus
249rtc*	at ebus?
250
251#### Serial port configuration
252
253## NS16x50 serial chips and clones.
254com*	at ebus?
255
256
257#### Disk controllers and disks
258
259## A disk-like interface to files.  Can be used to create floppy, CD,
260## miniroot images, etc.
261
262#pseudo-device	vnd	
263#options 	VND_COMPRESSION		# compressed vnd(4)
264
265## Memory disk device, used on boot floppies with compressed
266## kernel-plus-root-disk images.
267
268#pseudo-device	md	1
269
270
271#### Network interfaces
272
273## Happy Meal Ethernet
274hme*		at pci?	dev ? function ?	# network "hme" compatible
275
276# MII/PHY support
277qsphy*		at mii? phy ?		# Quality Semiconductor QS6612 PHYs
278
279## Loopback network interface; required
280pseudo-device	loop
281
282## SLIP and CSLIP interfaces, for IP over a serial line.
283#pseudo-device	sl		
284
285## PPP, the successor to SLIP.  See pppd(8).
286#pseudo-device	ppp		
287
288## PPP over Ethernet (RFC 2516)
289#pseudo-device	pppoe
290
291## Network "tunnel" device, allowing protocol stacks to run in the userland.
292## This is used by the third-party user-mode "ppp" program, and others.
293#pseudo-device	tun		
294#pseudo-device	tap			# virtual Ethernet
295
296## Generic L3 over IP tunnel
297#pseudo-device	gre			# generic L3 over IP tunnel
298
299## Berkeley Packet Filter, required to run RARPD.  A generic C-language
300## interface that allows selective examining of incoming packets.
301pseudo-device	bpfilter
302
303## IP Filter, used in firewall and NAT applications.  See ipnat(8) for
304## one example of the use of the IP Filter.
305#pseudo-device	ipfilter
306
307## for IPv6
308#pseudo-device	gif			# IPv[46] over IPv[46] tunnel (RFC1933)
309#pseudo-device	faith			# IPv[46] tcp relay translation i/f
310#pseudo-device	stf			# 6to4 IPv6 over IPv4 encapsulation
311
312## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4).
313#pseudo-device	vlan
314
315#### Audio and video devices
316
317## /dev/audio support
318audiocs*	at ebus?		# SUNW,CS4231
319audio*		at audiocs?
320
321# wscons
322pckbc*		at ebus?		# PC keyboard controller
323pckbd*		at pckbc?		# PC keyboard
324pms*		at pckbc?		# PS/2 mouse for wsmouse
325igsfb*		at pci? dev ? function ?
326wsdisplay*	at igsfb? console ?
327wskbd* 		at pckbd? console ?
328wsmouse*	at pms? mux 0
329
330
331#### Other device configuration
332
333## Pseudo ttys, required for network logins and programs like screen.
334
335pseudo-device	pty			# pseudo-terminals
336
337## Random device, used to implement /dev/random (a source of random noise),
338## and generate randomness for some kernel formulae.
339
340pseudo-device	rnd
341
342# a pseudo device needed for Coda	# also needs CODA (above)
343#pseudo-device	vcoda		4	# coda minicache <-> venus comm.
344
345# wscons pseudo-devices
346pseudo-device	wsmux			# mouse & keyboard multiplexor
347pseudo-device	wsfont
348
349pseudo-device	clockctl		# user control of clock subsystem
350pseudo-device	ksyms			# /dev/ksyms
351