KRUPS revision 1.32
1# $NetBSD: KRUPS,v 1.32 2005/10/08 01:49:40 uwe Exp $ 2# From: NetBSD: GENERIC,v 1.180 2005/09/10 19:20:50 jmmv Exp 3# 4# Krups (JavaStation-NC) machine description file 5# 6 7include "arch/sparc/conf/std.sparc" 8 9options INCLUDE_CONFIG_FILE # embed config file in kernel binary 10 11#ident "KRUPS-$Revision: 1.32 $" 12 13maxusers 32 14 15## System kernel configuration. See options(4) for more detail. 16 17 18# Options for variants of the Sun SPARC architecure. 19# We currently support three architecture types; at least one is required. 20options SUN4M # sun4m - SS10, SS20, Classic, etc. 21 22# microSPARC-IIep is PCI based sun4m (JavaStation-NC, CP1200, etc) 23# This option selects if SUN4M means "normal" 4m or IIep. Kernels 24# with this option turned on will refuse to work on normal 4m. 25options MSIIEP # microSPARC-IIep 26 27# XXX: uwe: PROM location conflicts with kernel VA space !!! 28options PROM_AT_F0 29makeoptions TEXTADDR=E8004000 30 31 32## System options specific to the sparc machine type 33 34# XXX: uwe: to do 35# Blink the power LED on some machines to indicate the system load. 36#options BLINK 37 38 39#### System options that are the same for all ports 40 41## Root device configuration: change the ?'s if you are going to use a 42## nonstandard root partition (other than where the kernel is booted from) 43## and/or nonstandard root type (not ffs or nfs). Normally this can be 44## automagically determined at boot time. 45 46config netbsd root on ? type ? 47 48## System call tracing (see ktrace(1)). 49options KTRACE 50options SYSTRACE # system call vetting via systrace(1) 51 52## Collect statistics on kernel malloc's and free's. This does have a 53## significant performance hit on slower machines, so it is intended for 54## diagnostic use only. 55#options KMEMSTATS 56 57## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2)) 58options SYSVMSG # System V message queues 59options SYSVSEM # System V semaphores 60#options SEMMNI=10 # number of semaphore identifiers 61#options SEMMNS=60 # number of semaphores in system 62#options SEMUME=10 # max number of undo entries per process 63#options SEMMNU=30 # number of undo structures in system 64options SYSVSHM # System V shared memory 65#options SHMMAXPGS=1024 # 1024 pages is the default 66options P1003_1B_SEMAPHORE # p1003.1b semaphore support 67 68## Loadable kernel module support; still under development. 69#options LKM 70 71#options USERCONF # userconf(4) support 72#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 73options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 74 75## NFS boot options; tries DHCP/BOOTP then BOOTPARAM 76options NFS_BOOT_BOOTPARAM 77#options NFS_BOOT_BOOTP 78options NFS_BOOT_DHCP 79 80 81#### wscons options 82 83# builtin terminal emulations 84options WSEMUL_SUN # sun terminal emulation 85options WSEMUL_VT100 # VT100 / VT220 emulation 86options WSEMUL_DEFAULT="\"vt100\"" 87# different kernel output - see dev/wscons/wsdisplayvar.h 88options WS_KERNEL_FG=WSCOL_GREEN 89#options WS_KERNEL_BG=WSCOL_BLACK 90options WS_KERNEL_COLATTR=WSATTR_HILIT 91# compatibility to other console drivers 92options WSDISPLAY_COMPAT_PCVT # emulate some ioctls 93options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls 94options WSDISPLAY_COMPAT_USL # VT handling 95options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 96 97options FONT_GALLANT12x22 # PROM font look-alike 98 99# see dev/pckbc/wskbdmap_mfii.c for implemented layouts 100#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" 101# allocate a number of virtual screens at autoconfiguration time 102#options WSDISPLAY_DEFAULTSCREENS=4 103 104 105#### Debugging options 106 107## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at 108## serial console break or keyboard reset, where the PROM would normally 109## intercept. DDB_HISTORY_SIZE adds up/down arrow command history. 110#options DDB # kernel dynamic debugger 111#options DDB_HISTORY_SIZE=100 # enable history editing in DDB 112#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 113 114## You may also use gdb, on another computer connected to this machine over 115## a serial port. Both KGDB_DEV and KGDB_DEVRATE should be specified; 116## KGDB_DEV is a dev_t encoded device number of the serial port to use, where 117## the minor device number encodes the PROM enumeration of the serial ports, 118## i.e.: 119## 0xc00 = ttya, 0xc01 = ttyb, 0xc02 = ttyc, 0xc03 = ttyd. 120## (Note: ttyc and ttyd are available only on some sun4 models) 121#options KGDB # support for kernel gdb 122#options KGDB_DEV=0xc01 # kgdb device number (this is `ttyb') 123#options KGDB_DEVRATE=38400 # baud rate 124 125 126## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file), 127## such that gdb(1) can be used on a kernel coredump. 128 129#makeoptions DEBUG="-g" 130makeoptions CPUFLAGS="-mcpu=supersparc" 131 132 133## Adds code to the kernel that does internal consistency checks, and will 134## cause the kernel to panic if corruption of internal data structures 135## is detected. 136#options DIAGNOSTIC # extra kernel sanity checking 137 138## Enable (possibly expensive) debugging code that may also display messages 139## on the system console 140#options DEBUG 141 142options MIIVERBOSE # verbose PHY autoconfig messages 143 144## `INSECURE' turns off the kernel security level (securelevel = 0 always). 145## This allows writing to /dev/mem, loading kernel modules while multi-user, 146## and other insecurities good only for development work. Do not use this 147## option on a production machine. 148#options INSECURE 149 150## `FDSCRIPTS' allows non-readable but executable scripts by providing a 151## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS', 152## which implies FDSCRIPTS, allows scripts to be set-user-id using the same 153## opaque file mechanism. Perl calls this "secure setuid scripts." 154 155#options FDSCRIPTS 156#options SETUIDSCRIPTS 157 158## Options for compatibility with previous releases foreign system binaries. 159## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up 160## additional user-level utilities or system configuration files. See 161## compat_sunos(8) and compat_svr4(8). 162 163options COMPAT_43 # 4.3BSD system interfaces 164options COMPAT_10 # NetBSD 1.0 binary compatibility 165options COMPAT_11 # NetBSD 1.1 binary compatibility 166options COMPAT_12 # NetBSD 1.2 binary compatibility 167options COMPAT_13 # NetBSD 1.3 binary compatibility 168options COMPAT_14 # NetBSD 1.4 binary compatibility 169options COMPAT_16 # NetBSD 1.6 binary compatibility 170options COMPAT_20 # NetBSD 2.0 binary compatibility 171options COMPAT_30 # NetBSD 3.0 compatibility. 172options COMPAT_SUNOS # SunOS 4.x binary compatibility 173options COMPAT_SVR4 # SunOS 5.x binary compatibility 174options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 175 176## File systems. You probably need at least one of FFS or NFS. 177file-system FFS # Berkeley Fast Filesystem 178file-system NFS # Sun NFS-compatible filesystem client 179file-system KERNFS # kernel data-structure filesystem 180file-system NULLFS # NULL layered filesystem 181file-system OVERLAY # overlay file system 182file-system MFS # memory-based filesystem 183file-system FDESC # user file descriptor filesystem 184file-system UMAPFS # uid/gid remapping filesystem 185#file-system LFS # Log-based filesystem (still experimental) 186file-system PORTAL # portal filesystem (still experimental) 187file-system PROCFS # /proc 188#file-system CD9660 # ISO 9660 + Rock Ridge file system 189file-system UNION # union file system 190#file-system MSDOSFS # MS-DOS FAT filesystem(s). 191#file-system CODA # Coda File System; also needs vcoda (below) 192file-system PTYFS # /dev/pts/N support 193#file-system TMPFS # experimental - Efficient memory file-system 194 195## File system options. 196#options NFSSERVER # Sun NFS-compatible filesystem server 197#options QUOTA # FFS quotas 198#options FFS_EI # FFS Endian Independent support 199#options SOFTDEP # FFS soft updates support. 200options FFS_NO_SNAPSHOT # ffs snapshots 201 202## Network protocol support. In most environments, INET is required. 203options INET # IP (Internet Protocol) v4 204options INET6 # IPV6 205#options IPSEC # IP security 206#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 207#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 208#options IPSEC_DEBUG # debug for IP security 209#options GATEWAY # packet forwarding ("router switch") 210#options MROUTING # packet forwarding of multicast packets 211#options PIM # Protocol Independent Multicast 212#options DIRECTED_BROADCAST # allow broadcasts through routers 213options NS # Xerox NS networking 214#options NSIP # Xerox NS tunneling over IP 215options ISO,TPIP # OSI networking 216#options EON # OSI tunneling over IP 217#options CCITT,LLC,HDLC # X.25 packet switched protocol 218#options NETATALK # AppleTalk (over Ethernet) protocol 219options NTP # Network Time Protocol in-kernel support 220#options PPS_SYNC # Add serial line synchronization for NTP 221options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs. 222options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device 223#options IPFILTER_DEFAULT_BLOCK # block all packets by default 224options PPP_BSDCOMP # Add BSD compression to ppp device 225options PPP_DEFLATE # Add deflate (libz) compression to ppp device 226options PPP_FILTER # Add active filters for ppp (via bpf) 227 228 229 230#### Main bus and CPU .. all systems. 231mainbus0 at root 232cpu0 at mainbus0 233 234#### Bus types found on SPARC systems. 235 236msiiep0 at mainbus0 # microSPARC-IIep PCIC, timer, ... 237 238mspcic0 at msiiep0 # PCI tree 239pci0 at mspcic0 240options PCIVERBOSE 241#options PCI_CONFIG_DUMP # hangs reading IGA1682 config past offset 64 242 243ebus* at pci? dev ? function ? # ebus devices 244 245 246#### Standard system devices -- all required for a given architecture 247 248# timer is part of ms-IIep PCIC 249timer0 at msiiep0 250 251## ds1287 TOD clock at EBus 252rtc* at ebus? 253 254#### Serial port configuration 255 256## NS16x50 serial chips and clones. 257com* at ebus? 258 259 260#### Disk controllers and disks 261 262## A disk-like interface to files. Can be used to create floppy, CD, 263## miniroot images, etc. 264 265#pseudo-device vnd 4 266#options VND_COMPRESSION # compressed vnd(4) 267 268## Memory disk device, used on boot floppies with compressed 269## kernel-plus-root-disk images. 270 271#pseudo-device md 1 272 273 274#### Network interfaces 275 276## Happy Meal Ethernet 277hme* at pci? dev ? function ? # network "hme" compatible 278 279# MII/PHY support 280qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs 281 282## Loopback network interface; required 283pseudo-device loop 284 285## SLIP and CSLIP interfaces, for IP over a serial line. 286#pseudo-device sl 2 287 288## PPP, the successor to SLIP. See pppd(8). 289#pseudo-device ppp 2 290 291## PPP over Ethernet (RFC 2516) 292#pseudo-device pppoe 293 294## Network "tunnel" device, allowing protocol stacks to run in the userland. 295## This is used by the third-party user-mode "ppp" program, and others. 296#pseudo-device tun 4 297#pseudo-device tap # virtual Ethernet 298 299## Generic L3 over IP tunnel 300#pseudo-device gre 2 # generic L3 over IP tunnel 301 302## Berkeley Packet Filter, required to run RARPD. A generic C-language 303## interface that allows selective examining of incoming packets. 304pseudo-device bpfilter 8 305 306## IP Filter, used in firewall and NAT applications. See ipnat(8) for 307## one example of the use of the IP Filter. 308#pseudo-device ipfilter 309 310## for IPv6 311#pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 312#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 313#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 314 315## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 316#pseudo-device vlan 317 318#### Audio and video devices 319 320## /dev/audio support 321audiocs* at ebus? # SUNW,CS4231 322audio* at audiocs? 323 324# wscons 325pckbc* at ebus? # PC keyboard controller 326pckbd* at pckbc? # PC keyboard 327pms* at pckbc? # PS/2 mouse for wsmouse 328igsfb* at pci? dev ? function ? 329wsdisplay* at igsfb? console ? 330wskbd* at pckbd? console ? 331wsmouse* at pms? mux 0 332 333 334#### Other device configuration 335 336## Pseudo ttys, required for network logins and programs like screen. 337 338pseudo-device pty # pseudo-terminals 339 340## Random device, used to implement /dev/random (a source of random noise), 341## and generate randomness for some kernel formulae. 342 343pseudo-device rnd 344 345# a pseudo device needed for Coda # also needs CODA (above) 346#pseudo-device vcoda 4 # coda minicache <-> venus comm. 347 348# wscons pseudo-devices 349pseudo-device wsmux # mouse & keyboard multiplexor 350pseudo-device wsfont 351 352pseudo-device clockctl # user control of clock subsystem 353pseudo-device ksyms # /dev/ksyms 354