KRUPS revision 1.29
1# $NetBSD: KRUPS,v 1.29 2005/07/31 04:04:46 yamt Exp $ 2# From: NetBSD: GENERIC,v 1.160 2004/07/10 12:05:35 uwe Exp 3# 4# Krups (JavaStation-NC) machine description file 5# 6 7include "arch/sparc/conf/std.sparc" 8 9options INCLUDE_CONFIG_FILE # embed config file in kernel binary 10 11#ident "KRUPS-$Revision: 1.29 $" 12 13maxusers 32 14 15## System kernel configuration. See options(4) for more detail. 16 17 18# Options for variants of the Sun SPARC architecure. 19# We currently support three architecture types; at least one is required. 20options SUN4M # sun4m - SS10, SS20, Classic, etc. 21 22# microSPARC-IIep is PCI based sun4m (JavaStation-NC, CP1200, etc) 23# This option selects if SUN4M means "normal" 4m or IIep. Kernels 24# with this option turned on will refuse to work on normal 4m. 25options MSIIEP # microSPARC-IIep 26 27# XXX: uwe: PROM location conflicts with kernel VA space !!! 28options PROM_AT_F0 29makeoptions TEXTADDR=E8004000 30 31 32## System options specific to the sparc machine type 33 34# XXX: uwe: to do 35# Blink the power LED on some machines to indicate the system load. 36#options BLINK 37 38 39#### System options that are the same for all ports 40 41## Root device configuration: change the ?'s if you are going to use a 42## nonstandard root partition (other than where the kernel is booted from) 43## and/or nonstandard root type (not ffs or nfs). Normally this can be 44## automagically determined at boot time. 45 46config netbsd root on ? type ? 47 48## System call tracing (see ktrace(1)). 49options KTRACE 50options SYSTRACE # system call vetting via systrace(1) 51 52## Collect statistics on kernel malloc's and free's. This does have a 53## significant performance hit on slower machines, so it is intended for 54## diagnostic use only. 55#options KMEMSTATS 56 57## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2)) 58options SYSVMSG # System V message queues 59options SYSVSEM # System V semaphores 60#options SEMMNI=10 # number of semaphore identifiers 61#options SEMMNS=60 # number of semaphores in system 62#options SEMUME=10 # max number of undo entries per process 63#options SEMMNU=30 # number of undo structures in system 64options SYSVSHM # System V shared memory 65#options SHMMAXPGS=1024 # 1024 pages is the default 66options P1003_1B_SEMAPHORE # p1003.1b semaphore support 67 68## Loadable kernel module support; still under development. 69#options LKM 70 71#options USERCONF # userconf(4) support 72#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 73options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 74 75## NFS boot options; tries DHCP/BOOTP then BOOTPARAM 76options NFS_BOOT_BOOTPARAM 77#options NFS_BOOT_BOOTP 78options NFS_BOOT_DHCP 79 80 81#### wscons options 82 83# builtin terminal emulations 84options WSEMUL_SUN # sun terminal emulation 85options WSEMUL_VT100 # VT100 / VT220 emulation 86options WSEMUL_DEFAULT="\"vt100\"" 87# different kernel output - see dev/wscons/wsdisplayvar.h 88options WS_KERNEL_FG=WSCOL_GREEN 89#options WS_KERNEL_BG=WSCOL_BLACK 90options WS_KERNEL_COLATTR=WSATTR_HILIT 91# compatibility to other console drivers 92options WSDISPLAY_COMPAT_PCVT # emulate some ioctls 93options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls 94options WSDISPLAY_COMPAT_USL # VT handling 95options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 96 97options FONT_GALLANT12x22 # PROM font look-alike 98 99# see dev/pckbc/wskbdmap_mfii.c for implemented layouts 100#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" 101# allocate a number of virtual screens at autoconfiguration time 102#options WSDISPLAY_DEFAULTSCREENS=4 103 104 105#### Debugging options 106 107## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at 108## serial console break or keyboard reset, where the PROM would normally 109## intercept. DDB_HISTORY_SIZE adds up/down arrow command history. 110#options DDB # kernel dynamic debugger 111#options DDB_HISTORY_SIZE=100 # enable history editing in DDB 112#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 113 114## You may also use gdb, on another computer connected to this machine over 115## a serial port. Both KGDB_DEV and KGDB_DEVRATE should be specified; 116## KGDB_DEV is a dev_t encoded device number of the serial port to use, where 117## the minor device number encodes the PROM enumeration of the serial ports, 118## i.e.: 119## 0xc00 = ttya, 0xc01 = ttyb, 0xc02 = ttyc, 0xc03 = ttyd. 120## (Note: ttyc and ttyd are available only on some sun4 models) 121#options KGDB # support for kernel gdb 122#options KGDB_DEV=0xc01 # kgdb device number (this is `ttyb') 123#options KGDB_DEVRATE=38400 # baud rate 124 125 126## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file), 127## such that gdb(1) can be used on a kernel coredump. 128 129#makeoptions DEBUG="-g" 130makeoptions CPUFLAGS="-mcpu=supersparc" 131 132 133## Adds code to the kernel that does internal consistency checks, and will 134## cause the kernel to panic if corruption of internal data structures 135## is detected. 136#options DIAGNOSTIC # extra kernel sanity checking 137 138## Enable (possibly expensive) debugging code that may also display messages 139## on the system console 140#options DEBUG 141 142options MIIVERBOSE # verbose PHY autoconfig messages 143 144## `INSECURE' turns off the kernel security level (securelevel = 0 always). 145## This allows writing to /dev/mem, loading kernel modules while multi-user, 146## and other insecurities good only for development work. Do not use this 147## option on a production machine. 148#options INSECURE 149 150## `FDSCRIPTS' allows non-readable but executable scripts by providing a 151## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS', 152## which implies FDSCRIPTS, allows scripts to be set-user-id using the same 153## opaque file mechanism. Perl calls this "secure setuid scripts." 154 155#options FDSCRIPTS 156#options SETUIDSCRIPTS 157 158## Options for compatibility with previous releases foreign system binaries. 159## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up 160## additional user-level utilities or system configuration files. See 161## compat_sunos(8) and compat_svr4(8). 162 163options COMPAT_43 # 4.3BSD system interfaces 164options COMPAT_10 # NetBSD 1.0 binary compatibility 165options COMPAT_11 # NetBSD 1.1 binary compatibility 166options COMPAT_12 # NetBSD 1.2 binary compatibility 167options COMPAT_13 # NetBSD 1.3 binary compatibility 168options COMPAT_14 # NetBSD 1.4 binary compatibility 169options COMPAT_16 # NetBSD 1.6 binary compatibility 170options COMPAT_20 # NetBSD 2.0 binary compatibility 171options COMPAT_SUNOS # SunOS 4.x binary compatibility 172options COMPAT_SVR4 # SunOS 5.x binary compatibility 173options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 174 175## File systems. You probably need at least one of FFS or NFS. 176file-system FFS # Berkeley Fast Filesystem 177file-system NFS # Sun NFS-compatible filesystem client 178file-system KERNFS # kernel data-structure filesystem 179file-system NULLFS # NULL layered filesystem 180file-system OVERLAY # overlay file system 181file-system MFS # memory-based filesystem 182file-system FDESC # user file descriptor filesystem 183file-system UMAPFS # uid/gid remapping filesystem 184#file-system LFS # Log-based filesystem (still experimental) 185file-system PORTAL # portal filesystem (still experimental) 186file-system PROCFS # /proc 187#file-system CD9660 # ISO 9660 + Rock Ridge file system 188file-system UNION # union file system 189#file-system MSDOSFS # MS-DOS FAT filesystem(s). 190#file-system CODA # Coda File System; also needs vcoda (below) 191 192## File system options. 193#options NFSSERVER # Sun NFS-compatible filesystem server 194#options QUOTA # FFS quotas 195#options FFS_EI # FFS Endian Independent support 196#options SOFTDEP # FFS soft updates support. 197options FFS_NO_SNAPSHOT # ffs snapshots 198 199## Network protocol support. In most environments, INET is required. 200options INET # IP (Internet Protocol) v4 201options INET6 # IPV6 202#options IPSEC # IP security 203#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 204#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 205#options IPSEC_DEBUG # debug for IP security 206#options GATEWAY # packet forwarding ("router switch") 207#options MROUTING # packet forwarding of multicast packets 208#options PIM # Protocol Independent Multicast 209#options DIRECTED_BROADCAST # allow broadcasts through routers 210options NS # Xerox NS networking 211#options NSIP # Xerox NS tunneling over IP 212options ISO,TPIP # OSI networking 213#options EON # OSI tunneling over IP 214#options CCITT,LLC,HDLC # X.25 packet switched protocol 215#options NETATALK # AppleTalk (over Ethernet) protocol 216options NTP # Network Time Protocol in-kernel support 217#options PPS_SYNC # Add serial line synchronization for NTP 218options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs. 219options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device 220#options IPFILTER_DEFAULT_BLOCK # block all packets by default 221options PPP_BSDCOMP # Add BSD compression to ppp device 222options PPP_DEFLATE # Add deflate (libz) compression to ppp device 223options PPP_FILTER # Add active filters for ppp (via bpf) 224 225 226 227#### Main bus and CPU .. all systems. 228mainbus0 at root 229cpu0 at mainbus0 230 231#### Bus types found on SPARC systems. 232 233msiiep0 at mainbus0 # microSPARC-IIep PCIC, timer, ... 234 235mspcic0 at msiiep0 # PCI tree 236pci0 at mspcic0 237options PCIVERBOSE 238#options PCI_CONFIG_DUMP # hangs reading IGA1682 config past offset 64 239 240ebus* at pci? dev ? function ? # ebus devices 241 242 243#### Standard system devices -- all required for a given architecture 244 245# timer is part of ms-IIep PCIC 246timer0 at msiiep0 247 248## ds1287 TOD clock at EBus 249rtc* at ebus? 250 251#### Serial port configuration 252 253## NS16x50 serial chips and clones. 254com* at ebus? 255 256 257#### Disk controllers and disks 258 259## A disk-like interface to files. Can be used to create floppy, CD, 260## miniroot images, etc. 261 262#pseudo-device vnd 4 263 264## Memory disk device, used on boot floppies with compressed 265## kernel-plus-root-disk images. 266 267#pseudo-device md 1 268 269 270#### Network interfaces 271 272## Happy Meal Ethernet 273hme* at pci? dev ? function ? # network "hme" compatible 274 275# MII/PHY support 276qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs 277 278## Loopback network interface; required 279pseudo-device loop 280 281## SLIP and CSLIP interfaces, for IP over a serial line. 282#pseudo-device sl 2 283 284## PPP, the successor to SLIP. See pppd(8). 285#pseudo-device ppp 2 286 287## PPP over Ethernet (RFC 2516) 288#pseudo-device pppoe 289 290## Network "tunnel" device, allowing protocol stacks to run in the userland. 291## This is used by the third-party user-mode "ppp" program, and others. 292#pseudo-device tun 4 293 294## Generic L3 over IP tunnel 295#pseudo-device gre 2 # generic L3 over IP tunnel 296 297## Berkeley Packet Filter, required to run RARPD. A generic C-language 298## interface that allows selective examining of incoming packets. 299pseudo-device bpfilter 8 300 301## IP Filter, used in firewall and NAT applications. See ipnat(8) for 302## one example of the use of the IP Filter. 303#pseudo-device ipfilter 304 305## for IPv6 306#pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 307#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 308#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 309 310## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 311#pseudo-device vlan 312 313#### Audio and video devices 314 315## /dev/audio support 316audiocs* at ebus? # SUNW,CS4231 317audio* at audiocs? 318 319# wscons 320pckbc* at ebus? # PC keyboard controller 321pckbd* at pckbc? # PC keyboard 322pms* at pckbc? # PS/2 mouse for wsmouse 323igsfb* at pci? dev ? function ? 324wsdisplay* at igsfb? console ? 325wskbd* at pckbd? console ? 326wsmouse* at pms? mux 0 327 328 329#### Other device configuration 330 331## Pseudo ttys, required for network logins and programs like screen. 332 333pseudo-device pty # pseudo-terminals 334 335## Random device, used to implement /dev/random (a source of random noise), 336## and generate randomness for some kernel formulae. 337 338pseudo-device rnd 339 340# a pseudo device needed for Coda # also needs CODA (above) 341#pseudo-device vcoda 4 # coda minicache <-> venus comm. 342 343# wscons pseudo-devices 344pseudo-device wsmux # mouse & keyboard multiplexor 345pseudo-device wsfont 346 347pseudo-device clockctl # user control of clock subsystem 348pseudo-device ksyms # /dev/ksyms 349