KRUPS revision 1.23
1# $NetBSD: KRUPS,v 1.23 2004/09/04 23:29:57 manu Exp $ 2# From: NetBSD: GENERIC,v 1.160 2004/07/10 12:05:35 uwe Exp 3# 4# Krups (JavaStation-NC) machine description file 5# 6 7include "arch/sparc/conf/std.sparc" 8 9options INCLUDE_CONFIG_FILE # embed config file in kernel binary 10 11#ident "KRUPS-$Revision: 1.23 $" 12 13maxusers 32 14 15## System kernel configuration. See options(4) for more detail. 16 17 18# Options for variants of the Sun SPARC architecure. 19# We currently support three architecture types; at least one is required. 20options SUN4M # sun4m - SS10, SS20, Classic, etc. 21 22# microSPARC-IIep is PCI based sun4m (JavaStation-NC, CP1200, etc) 23# This option selects if SUN4M means "normal" 4m or IIep. Kernels 24# with this option turned on will refuse to work on normal 4m. 25options MSIIEP # microSPARC-IIep 26 27# XXX: uwe: PROM location conflicts with kernel VA space !!! 28options PROM_AT_F0 29makeoptions TEXTADDR=E8004000 30 31 32## System options specific to the sparc machine type 33 34# XXX: uwe: to do 35# Blink the power LED on some machines to indicate the system load. 36#options BLINK 37 38 39#### System options that are the same for all ports 40 41## Root device configuration: change the ?'s if you are going to use a 42## nonstandard root partition (other than where the kernel is booted from) 43## and/or nonstandard root type (not ffs or nfs). Normally this can be 44## automagically determined at boot time. 45 46config netbsd root on ? type ? 47 48## System call tracing (see ktrace(1)). 49options KTRACE 50options SYSTRACE # system call vetting via systrace(1) 51 52## Collect statistics on kernel malloc's and free's. This does have a 53## significant performance hit on slower machines, so it is intended for 54## diagnostic use only. 55#options KMEMSTATS 56 57## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2)) 58options SYSVMSG # System V message queues 59options SYSVSEM # System V semaphores 60#options SEMMNI=10 # number of semaphore identifiers 61#options SEMMNS=60 # number of semaphores in system 62#options SEMUME=10 # max number of undo entries per process 63#options SEMMNU=30 # number of undo structures in system 64options SYSVSHM # System V shared memory 65#options SHMMAXPGS=1024 # 1024 pages is the default 66options P1003_1B_SEMAPHORE # p1003.1b semaphore support 67 68## Loadable kernel module support; still under development. 69#options LKM 70 71#options USERCONF # userconf(4) support 72#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 73options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 74 75## NFS boot options; tries DHCP/BOOTP then BOOTPARAM 76options NFS_BOOT_BOOTPARAM 77#options NFS_BOOT_BOOTP 78options NFS_BOOT_DHCP 79 80 81#### wscons options 82 83# builtin terminal emulations 84options WSEMUL_SUN # sun terminal emulation 85options WSEMUL_VT100 # VT100 / VT220 emulation 86options WSEMUL_DEFAULT="\"vt100\"" 87# different kernel output - see dev/wscons/wsdisplayvar.h 88options WS_KERNEL_FG=WSCOL_GREEN 89#options WS_KERNEL_BG=WSCOL_BLACK 90options WS_KERNEL_COLATTR=WSATTR_HILIT 91# compatibility to other console drivers 92options WSDISPLAY_COMPAT_PCVT # emulate some ioctls 93options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls 94options WSDISPLAY_COMPAT_USL # VT handling 95options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 96 97options FONT_GALLANT12x22 # PROM font look-alike 98 99# see dev/pckbc/wskbdmap_mfii.c for implemented layouts 100#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" 101# allocate a number of virtual screens at autoconfiguration time 102#options WSDISPLAY_DEFAULTSCREENS=4 103 104 105#### Debugging options 106 107## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at 108## serial console break or keyboard reset, where the PROM would normally 109## intercept. DDB_HISTORY_SIZE adds up/down arrow command history. 110#options DDB # kernel dynamic debugger 111#options DDB_HISTORY_SIZE=100 # enable history editing in DDB 112#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 113 114## You may also use gdb, on another computer connected to this machine over 115## a serial port. Both KGDB_DEV and KGDB_DEVRATE should be specified; 116## KGDB_DEV is a dev_t encoded device number of the serial port to use, where 117## the minor device number encodes the PROM enumeration of the serial ports, 118## i.e.: 119## 0xc00 = ttya, 0xc01 = ttyb, 0xc02 = ttyc, 0xc03 = ttyd. 120## (Note: ttyc and ttyd are available only on some sun4 models) 121#options KGDB # support for kernel gdb 122#options KGDB_DEV=0xc01 # kgdb device number (this is `ttyb') 123#options KGDB_DEVRATE=38400 # baud rate 124 125 126## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file), 127## such that gdb(1) can be used on a kernel coredump. 128 129#makeoptions DEBUG="-g" 130makeoptions CPUFLAGS="-mcpu=supersparc" 131 132 133## Adds code to the kernel that does internal consistency checks, and will 134## cause the kernel to panic if corruption of internal data structures 135## is detected. 136#options DIAGNOSTIC # extra kernel sanity checking 137 138## Enable (possibly expensive) debugging code that may also display messages 139## on the system console 140#options DEBUG 141 142options MIIVERBOSE # verbose PHY autoconfig messages 143 144## `INSECURE' turns off the kernel security level (securelevel = 0 always). 145## This allows writing to /dev/mem, loading kernel modules while multi-user, 146## and other insecurities good only for development work. Do not use this 147## option on a production machine. 148#options INSECURE 149 150## `FDSCRIPTS' allows non-readable but executable scripts by providing a 151## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS', 152## which implies FDSCRIPTS, allows scripts to be set-user-id using the same 153## opaque file mechanism. Perl calls this "secure setuid scripts." 154 155#options FDSCRIPTS 156#options SETUIDSCRIPTS 157 158## Options for compatibility with previous releases foreign system binaries. 159## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up 160## additional user-level utilities or system configuration files. See 161## compat_sunos(8) and compat_svr4(8). 162 163options COMPAT_43 # 4.3BSD system interfaces 164options COMPAT_10 # NetBSD 1.0 binary compatibility 165options COMPAT_11 # NetBSD 1.1 binary compatibility 166options COMPAT_12 # NetBSD 1.2 binary compatibility 167options COMPAT_13 # NetBSD 1.3 binary compatibility 168options COMPAT_14 # NetBSD 1.4 binary compatibility 169options COMPAT_16 # NetBSD 1.6 binary compatibility 170options COMPAT_20 # NetBSD 2.0 binary compatibility 171options COMPAT_SUNOS # SunOS 4.x binary compatibility 172options COMPAT_SVR4 # SunOS 5.x binary compatibility 173 174## File systems. You probably need at least one of FFS or NFS. 175file-system FFS # Berkeley Fast Filesystem 176file-system NFS # Sun NFS-compatible filesystem client 177file-system KERNFS # kernel data-structure filesystem 178file-system NULLFS # NULL layered filesystem 179file-system OVERLAY # overlay file system 180file-system MFS # memory-based filesystem 181file-system FDESC # user file descriptor filesystem 182file-system UMAPFS # uid/gid remapping filesystem 183#file-system LFS # Log-based filesystem (still experimental) 184file-system PORTAL # portal filesystem (still experimental) 185file-system PROCFS # /proc 186#file-system CD9660 # ISO 9660 + Rock Ridge file system 187file-system UNION # union file system 188#file-system MSDOSFS # MS-DOS FAT filesystem(s). 189#file-system CODA # Coda File System; also needs vcoda (below) 190 191## File system options. 192#options NFSSERVER # Sun NFS-compatible filesystem server 193#options QUOTA # FFS quotas 194#options FFS_EI # FFS Endian Independent support 195#options SOFTDEP # FFS soft updates support. 196 197## Network protocol support. In most environments, INET is required. 198options INET # IP (Internet Protocol) v4 199options INET6 # IPV6 200#options IPSEC # IP security 201#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 202#options IPSEC_DEBUG # debug for IP security 203#options GATEWAY # packet forwarding ("router switch") 204#options MROUTING # packet forwarding of multicast packets 205#options PIM # Protocol Independent Multicast 206#options DIRECTED_BROADCAST # allow broadcasts through routers 207options NS # Xerox NS networking 208#options NSIP # Xerox NS tunneling over IP 209options ISO,TPIP # OSI networking 210#options EON # OSI tunneling over IP 211#options CCITT,LLC,HDLC # X.25 packet switched protocol 212#options NETATALK # AppleTalk (over Ethernet) protocol 213options NTP # Network Time Protocol in-kernel support 214#options PPS_SYNC # Add serial line synchronization for NTP 215options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs. 216options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device 217#options IPFILTER_DEFAULT_BLOCK # block all packets by default 218options PPP_BSDCOMP # Add BSD compression to ppp device 219options PPP_DEFLATE # Add deflate (libz) compression to ppp device 220options PPP_FILTER # Add active filters for ppp (via bpf) 221 222 223 224#### Main bus and CPU .. all systems. 225mainbus0 at root 226cpu0 at mainbus0 227 228#### Bus types found on SPARC systems. 229 230msiiep0 at mainbus0 # microSPARC-IIep PCIC, timer, ... 231 232mspcic0 at msiiep0 # PCI tree 233pci0 at mspcic0 234options PCIVERBOSE 235#options PCI_CONFIG_DUMP # hangs reading IGA1682 config past offset 64 236 237ebus* at pci? dev ? function ? # ebus devices 238 239 240#### Standard system devices -- all required for a given architecture 241 242# timer is part of ms-IIep PCIC 243timer0 at msiiep0 244 245## ds1287 TOD clock at EBus 246rtc* at ebus? 247 248#### Serial port configuration 249 250## NS16x50 serial chips and clones. 251com* at ebus? 252 253 254#### Disk controllers and disks 255 256## A disk-like interface to files. Can be used to create floppy, CD, 257## miniroot images, etc. 258 259#pseudo-device vnd 4 260 261## Memory disk device, used on boot floppies with compressed 262## kernel-plus-root-disk images. 263 264#pseudo-device md 1 265 266 267#### Network interfaces 268 269## Happy Meal Ethernet 270hme* at pci? dev ? function ? # network "hme" compatible 271 272# MII/PHY support 273qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs 274 275## Loopback network interface; required 276pseudo-device loop 277 278## SLIP and CSLIP interfaces, for IP over a serial line. 279#pseudo-device sl 2 280 281## PPP, the successor to SLIP. See pppd(8). 282#pseudo-device ppp 2 283 284## PPP over Ethernet (RFC 2516) 285#pseudo-device pppoe 286 287## Network "tunnel" device, allowing protocol stacks to run in the userland. 288## This is used by the third-party user-mode "ppp" program, and others. 289#pseudo-device tun 4 290 291## Generic L3 over IP tunnel 292#pseudo-device gre 2 # generic L3 over IP tunnel 293 294## Berkeley Packet Filter, required to run RARPD. A generic C-language 295## interface that allows selective examining of incoming packets. 296pseudo-device bpfilter 8 297 298## IP Filter, used in firewall and NAT applications. See ipnat(8) for 299## one example of the use of the IP Filter. 300#pseudo-device ipfilter 301 302## for IPv6 303#pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 304#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 305#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 306 307## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 308#pseudo-device vlan 309 310#### Audio and video devices 311 312## /dev/audio support 313audiocs* at ebus? # SUNW,CS4231 314audio* at audiocs? 315 316# wscons 317pckbc* at ebus? # PC keyboard controller 318pckbd* at pckbc? # PC keyboard 319pms* at pckbc? # PS/2 mouse for wsmouse 320igsfb* at pci? dev ? function ? 321wsdisplay* at igsfb? console ? 322wskbd* at pckbd? console ? 323wsmouse* at pms? mux 0 324 325 326#### Other device configuration 327 328## Pseudo ttys, required for network logins and programs like screen. 329 330pseudo-device pty # pseudo-terminals 331 332## Random device, used to implement /dev/random (a source of random noise), 333## and generate randomness for some kernel formulae. 334 335pseudo-device rnd 336 337# a pseudo device needed for Coda # also needs CODA (above) 338#pseudo-device vcoda 4 # coda minicache <-> venus comm. 339 340# wscons pseudo-devices 341pseudo-device wsmux # mouse & keyboard multiplexor 342pseudo-device wsfont 343 344pseudo-device clockctl # user control of clock subsystem 345pseudo-device ksyms # /dev/ksyms 346