KRUPS revision 1.20
1# $NetBSD: KRUPS,v 1.20 2003/12/14 17:26:58 martin Exp $ 2# From: NetBSD: GENERIC,v 1.148 2003/10/07 09:43:58 tron Exp 3# 4# Krups (JavaStation-NC) machine description file 5# 6 7include "arch/sparc/conf/std.sparc" 8 9options INCLUDE_CONFIG_FILE # embed config file in kernel binary 10 11#ident "KRUPS-$Revision: 1.20 $" 12 13maxusers 32 14 15## System kernel configuration. See options(4) for more detail. 16 17 18# Options for variants of the Sun SPARC architecure. 19# We currently support three architecture types; at least one is required. 20options SUN4M # sun4m - SS10, SS20, Classic, etc. 21 22# microSPARC-IIep is PCI based sun4m (JavaStation-NC, CP1200, etc) 23# This option selects if SUN4M means "normal" 4m or IIep. Kernels 24# with this option turned on will refuse to work on normal 4m. 25options MSIIEP # microSPARC-IIep 26 27# XXX: uwe: PROM location conflicts with kernel VA space !!! 28options PROM_AT_F0 29makeoptions TEXTADDR=E8004000 30 31 32## System options specific to the sparc machine type 33 34# XXX: uwe: to do 35# Blink the power LED on some machines to indicate the system load. 36#options BLINK 37 38 39#### System options that are the same for all ports 40 41## Root device configuration: change the ?'s if you are going to use a 42## nonstandard root partition (other than where the kernel is booted from) 43## and/or nonstandard root type (not ffs or nfs). Normally this can be 44## automagically determined at boot time. 45 46config netbsd root on ? type ? 47 48## System call tracing (see ktrace(1)). 49options KTRACE 50options SYSTRACE # system call vetting via systrace(1) 51 52## Collect statistics on kernel malloc's and free's. This does have a 53## significant performance hit on slower machines, so it is intended for 54## diagnostic use only. 55#options KMEMSTATS 56 57## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2)) 58options SYSVMSG # System V message queues 59options SYSVSEM # System V semaphores 60#options SEMMNI=10 # number of semaphore identifiers 61#options SEMMNS=60 # number of semaphores in system 62#options SEMUME=10 # max number of undo entries per process 63#options SEMMNU=30 # number of undo structures in system 64options SYSVSHM # System V shared memory 65#options SHMMAXPGS=1024 # 1024 pages is the default 66 67## Loadable kernel module support; still under development. 68#options LKM 69 70#options USERCONF # userconf(4) support 71#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 72 73## NFS boot options; tries DHCP/BOOTP then BOOTPARAM 74options NFS_BOOT_BOOTPARAM 75#options NFS_BOOT_BOOTP 76options NFS_BOOT_DHCP 77 78 79#### wscons options 80 81# builtin terminal emulations 82options WSEMUL_SUN # sun terminal emulation 83options WSEMUL_VT100 # VT100 / VT220 emulation 84options WSEMUL_DEFAULT="\"vt100\"" 85# different kernel output - see dev/wscons/wsdisplayvar.h 86options WS_KERNEL_FG=WSCOL_GREEN 87#options WS_KERNEL_BG=WSCOL_BLACK 88options WS_KERNEL_COLATTR=WSATTR_HILIT 89# compatibility to other console drivers 90options WSDISPLAY_COMPAT_PCVT # emulate some ioctls 91options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls 92options WSDISPLAY_COMPAT_USL # VT handling 93options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 94 95options FONT_GALLANT12x22 # PROM font look-alike 96 97# see dev/pckbc/wskbdmap_mfii.c for implemented layouts 98#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" 99# allocate a number of virtual screens at autoconfiguration time 100#options WSDISPLAY_DEFAULTSCREENS=4 101 102 103#### Debugging options 104 105## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at 106## serial console break or keyboard reset, where the PROM would normally 107## intercept. DDB_HISTORY_SIZE adds up/down arrow command history. 108#options DDB # kernel dynamic debugger 109#options DDB_HISTORY_SIZE=100 # enable history editing in DDB 110#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 111 112## You may also use gdb, on another computer connected to this machine over 113## a serial port. Both KGDB_DEV and KGDB_DEVRATE should be specified; 114## KGDB_DEV is a dev_t encoded device number of the serial port to use, where 115## the minor device number encodes the PROM enumeration of the serial ports, 116## i.e.: 117## 0xc00 = ttya, 0xc01 = ttyb, 0xc02 = ttyc, 0xc03 = ttyd. 118## (Note: ttyc and ttyd are available only on some sun4 models) 119#options KGDB # support for kernel gdb 120#options KGDB_DEV=0xc01 # kgdb device number (this is `ttyb') 121#options KGDB_DEVRATE=38400 # baud rate 122 123 124## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file), 125## such that gdb(1) can be used on a kernel coredump. 126 127#makeoptions DEBUG="-g" 128makeoptions CPUFLAGS="-mcpu=supersparc" 129 130 131## Adds code to the kernel that does internal consistency checks, and will 132## cause the kernel to panic if corruption of internal data structures 133## is detected. 134#options DIAGNOSTIC # extra kernel sanity checking 135 136## Enable (possibly expensive) debugging code that may also display messages 137## on the system console 138#options DEBUG 139 140options MIIVERBOSE # verbose PHY autoconfig messages 141 142## `INSECURE' turns off the kernel security level (securelevel = 0 always). 143## This allows writing to /dev/mem, loading kernel modules while multi-user, 144## and other insecurities good only for development work. Do not use this 145## option on a production machine. 146#options INSECURE 147 148## `FDSCRIPTS' allows non-readable but executable scripts by providing a 149## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS', 150## which implies FDSCRIPTS, allows scripts to be set-user-id using the same 151## opaque file mechanism. Perl calls this "secure setuid scripts." 152 153#options FDSCRIPTS 154#options SETUIDSCRIPTS 155 156## Options for compatibility with previous releases foreign system binaries. 157## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up 158## additional user-level utilities or system configuration files. See 159## compat_sunos(8) and compat_svr4(8). 160 161options COMPAT_43 # 4.3BSD system interfaces 162options COMPAT_10 # NetBSD 1.0 binary compatibility 163options COMPAT_11 # NetBSD 1.1 binary compatibility 164options COMPAT_12 # NetBSD 1.2 binary compatibility 165options COMPAT_13 # NetBSD 1.3 binary compatibility 166options COMPAT_14 # NetBSD 1.4 binary compatibility 167options COMPAT_16 # NetBSD 1.6 binary compatibility 168options COMPAT_SUNOS # SunOS 4.x binary compatibility 169options COMPAT_SVR4 # SunOS 5.x binary compatibility 170 171## File systems. You probably need at least one of FFS or NFS. 172#file-system FFS # Berkeley Fast Filesystem 173file-system NFS # Sun NFS-compatible filesystem client 174file-system KERNFS # kernel data-structure filesystem 175file-system NULLFS # NULL layered filesystem 176file-system OVERLAY # overlay file system 177file-system MFS # memory-based filesystem 178file-system FDESC # user file descriptor filesystem 179file-system UMAPFS # uid/gid remapping filesystem 180#file-system LFS # Log-based filesystem (still experimental) 181file-system PORTAL # portal filesystem (still experimental) 182file-system PROCFS # /proc 183#file-system CD9660 # ISO 9660 + Rock Ridge file system 184file-system UNION # union file system 185#file-system MSDOSFS # MS-DOS FAT filesystem(s). 186#file-system CODA # Coda File System; also needs vcoda (below) 187 188## File system options. 189#options NFSSERVER # Sun NFS-compatible filesystem server 190#options QUOTA # FFS quotas 191#options FFS_EI # FFS Endian Independent support 192#options SOFTDEP # FFS soft updates support. 193 194## Network protocol support. In most environments, INET is required. 195options INET # IP (Internet Protocol) v4 196options INET6 # IPV6 197#options IPSEC # IP security 198#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 199#options IPSEC_DEBUG # debug for IP security 200#options GATEWAY # packet forwarding ("router switch") 201#options MROUTING # packet forwarding of multicast packets 202#options DIRECTED_BROADCAST # allow broadcasts through routers 203options NS # Xerox NS networking 204#options NSIP # Xerox NS tunneling over IP 205options ISO,TPIP # OSI networking 206#options EON # OSI tunneling over IP 207#options CCITT,LLC,HDLC # X.25 packet switched protocol 208#options NETATALK # AppleTalk (over Ethernet) protocol 209options NTP # Network Time Protocol in-kernel support 210#options PPS_SYNC # Add serial line synchronization for NTP 211options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs. 212options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device 213#options IPFILTER_DEFAULT_BLOCK # block all packets by default 214options PPP_BSDCOMP # Add BSD compression to ppp device 215options PPP_DEFLATE # Add deflate (libz) compression to ppp device 216options PPP_FILTER # Add active filters for ppp (via bpf) 217 218 219#### Main bus and CPU .. all systems. 220mainbus0 at root 221cpu0 at mainbus0 222 223#### Bus types found on SPARC systems. 224 225msiiep0 at mainbus0 # microSPARC-IIep PCIC, timer, ... 226 227mspcic0 at msiiep0 # PCI tree 228pci0 at mspcic0 229options PCIVERBOSE 230#options PCI_CONFIG_DUMP # hangs reading IGA1682 config past offset 64 231 232ebus* at pci? dev ? function ? # ebus devices 233 234 235#### Standard system devices -- all required for a given architecture 236 237# timer is part of ms-IIep PCIC 238timer0 at msiiep0 239 240## ds1287 TOD clock at EBus 241rtc* at ebus? 242 243#### Serial port configuration 244 245## NS16x50 serial chips and clones. 246com* at ebus? 247 248 249#### Disk controllers and disks 250 251## A disk-like interface to files. Can be used to create floppy, CD, 252## miniroot images, etc. 253 254#pseudo-device vnd 4 255 256## Memory disk device, used on boot floppies with compressed 257## kernel-plus-root-disk images. 258 259#pseudo-device md 1 260 261 262#### Network interfaces 263 264## Happy Meal Ethernet 265hme* at pci? dev ? function ? # network "hme" compatible 266 267# MII/PHY support 268qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs 269 270## Loopback network interface; required 271pseudo-device loop 272 273## SLIP and CSLIP interfaces, for IP over a serial line. 274#pseudo-device sl 2 275 276## PPP, the successor to SLIP. See pppd(8). 277#pseudo-device ppp 2 278 279## PPP over Ethernet (RFC 2516) 280#pseudo-device pppoe 281 282## Network "tunnel" device, allowing protocol stacks to run in the userland. 283## This is used by the third-party user-mode "ppp" program, and others. 284#pseudo-device tun 4 285 286## Generic L3 over IP tunnel 287#pseudo-device gre 2 # generic L3 over IP tunnel 288 289## Berkeley Packet Filter, required to run RARPD. A generic C-language 290## interface that allows selective examining of incoming packets. 291pseudo-device bpfilter 8 292 293## IP Filter, used in firewall and NAT applications. See ipnat(8) for 294## one example of the use of the IP Filter. 295#pseudo-device ipfilter 296 297## for IPv6 298#pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 299#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 300#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 301 302## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 303#pseudo-device vlan 304 305#### Audio and video devices 306 307## /dev/audio support 308audiocs* at ebus? # SUNW,CS4231 309audio* at audiocs? 310 311# wscons 312pckbc* at ebus? # PC keyboard controller 313pckbd* at pckbc? # PC keyboard 314pms* at pckbc? # PS/2 mouse for wsmouse 315igsfb* at pci? dev ? function ? 316wsdisplay* at igsfb? console ? 317wskbd* at pckbd? console ? 318wsmouse* at pms? mux 0 319 320 321#### Other device configuration 322 323## Pseudo ttys, required for network logins and programs like screen. 324 325pseudo-device pty # pseudo-terminals 326 327## Random device, used to implement /dev/random (a source of random noise), 328## and generate randomness for some kernel formulae. 329 330pseudo-device rnd 331 332# a pseudo device needed for Coda # also needs CODA (above) 333#pseudo-device vcoda 4 # coda minicache <-> venus comm. 334 335# wscons pseudo-devices 336pseudo-device wsmux # mouse & keyboard multiplexor 337pseudo-device wsfont 338 339pseudo-device clockctl # user control of clock subsystem 340pseudo-device ksyms # /dev/ksyms 341