KRUPS revision 1.10
1# $NetBSD: KRUPS,v 1.10 2002/06/17 05:14:25 lukem Exp $ 2# From: NetBSD: GENERIC,v 1.133 2002/04/25 15:06:37 atatat Exp 3# 4# Krups (JavaStation 10, aka JavaStation NC) machine description file 5# 6# XXX: This config is experimental and will not work without some 7# additional patches not yet committed to the tree. 8 9include "arch/sparc/conf/std.sparc" 10 11#options INCLUDE_CONFIG_FILE # embed config file in kernel binary 12 13#ident "KRUPS-$Revision: 1.10 $" 14 15maxusers 32 16 17## System kernel configuration. See options(4) for more detail. 18 19 20# Options for variants of the Sun SPARC architecure. 21# We currently support three architecture types; at least one is required. 22options SUN4M # sun4m - SS10, SS20, Classic, etc. 23 24# microSPARC-IIep is PCI based sun4m (JavaStation 10, CP1200, etc) 25# This option selects if SUN4M means "normal" 4m or IIep. Kernels 26# with this option turned on will refuse to work on normal 4m. 27options MSIIEP # microSPARC-IIep 28 29# XXX: uwe: PROM location conflicts with kernel VA space !!! 30makeoptions TEXTADDR=E8004000 31 32 33## System options specific to the sparc machine type 34 35# XXX: uwe: to do 36# Blink the power LED on some machines to indicate the system load. 37#options BLINK 38 39 40#### System options that are the same for all ports 41 42## Root device configuration: change the ?'s if you are going to use a 43## nonstandard root partition (other than where the kernel is booted from) 44## and/or nonstandard root type (not ffs or nfs). Normally this can be 45## automagically determined at boot time. 46 47config netbsd root on ? type ? 48 49## System call tracing (see ktrace(1)). 50options KTRACE 51 52## Collect statistics on kernel malloc's and free's. This does have a 53## significant performance hit on slower machines, so it is intended for 54## diagnostic use only. 55#options KMEMSTATS 56 57## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2)) 58#options SYSVMSG # System V message queues 59#options SYSVSEM # System V semaphores 60#options SEMMNI=10 # number of semaphore identifiers 61#options SEMMNS=60 # number of semaphores in system 62#options SEMUME=10 # max number of undo entries per process 63#options SEMMNU=30 # number of undo structures in system 64#options SYSVSHM # System V shared memory 65#options SHMMAXPGS=1024 # 1024 pages is the default 66 67## Loadable kernel module support; still under development. 68#options LKM 69 70#options USERCONF # userconf(4) support 71#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 72 73## NFS boot options; tries DHCP/BOOTP then BOOTPARAM 74options NFS_BOOT_BOOTPARAM 75#options NFS_BOOT_BOOTP 76options NFS_BOOT_DHCP 77 78#### Debugging options 79 80## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at 81## serial console break or keyboard reset, where the PROM would normally 82## intercept. DDB_HISTORY_SIZE adds up/down arrow command history. 83options DDB # kernel dynamic debugger 84options DDB_HISTORY_SIZE=100 # enable history editing in DDB 85options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 86 87## You may also use gdb, on another computer connected to this machine over 88## a serial port. Both KGDB_DEV and KGDB_DEVRATE should be specified; 89## KGDB_DEV is a dev_t encoded device number of the serial port to use, where 90## the minor device number encodes the PROM enumeration of the serial ports, 91## i.e.: 92## 0xc00 = ttya, 0xc01 = ttyb, 0xc02 = ttyc, 0xc03 = ttyd. 93## (Note: ttyc and ttyd are available only on some sun4 models) 94#options KGDB # support for kernel gdb 95#options KGDB_DEV=0xc01 # kgdb device number (this is `ttyb') 96#options KGDB_DEVRATE=38400 # baud rate 97 98 99## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file), 100## such that gdb(1) can be used on a kernel coredump. 101 102#makeoptions DEBUG="-g" 103makeoptions COPTS="-pipe -mcpu=supersparc -O2" 104 105 106## Adds code to the kernel that does internal consistency checks, and will 107## cause the kernel to panic if corruption of internal data structures 108## is detected. 109options DIAGNOSTIC # extra kernel sanity checking 110 111## Enable (possibly expensive) debugging code that may also display messages 112## on the system console 113#options DEBUG 114 115options MIIVERBOSE # verbose PHY autoconfig messages 116 117## `INSECURE' turns off the kernel security level (securelevel = 0 always). 118## This allows writing to /dev/mem, loading kernel modules while multi-user, 119## and other insecurities good only for development work. Do not use this 120## option on a production machine. 121#options INSECURE 122 123## Allow non-root users to grab /dev/console with programs such as xconsole. 124## `xconsole' therefore does not need setuid root with this option enabled. 125#options UCONSOLE 126 127## `FDSCRIPTS' allows non-readable but executable scripts by providing a 128## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS', 129## which implies FDSCRIPTS, allows scripts to be set-user-id using the same 130## opaque file mechanism. Perl calls this "secure setuid scripts." 131 132#options FDSCRIPTS 133#options SETUIDSCRIPTS 134 135## Options for compatibility with previous releases foreign system binaries. 136## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up 137## additional user-level utilities or system configuration files. See 138## compat_sunos(8) and compat_svr4(8). 139 140options COMPAT_43 # 4.3BSD system interfaces 141#options COMPAT_10 # NetBSD 1.0 binary compatibility 142#options COMPAT_11 # NetBSD 1.1 binary compatibility 143#options COMPAT_12 # NetBSD 1.2 binary compatibility 144#options COMPAT_13 # NetBSD 1.3 binary compatibility 145#options COMPAT_14 # NetBSD 1.4 binary compatibility 146#options COMPAT_SUNOS # SunOS 4.x binary compatibility 147#options COMPAT_SVR4 # SunOS 5.x binary compatibility 148 149## File systems. You probably need at least one of FFS or NFS. 150#file-system FFS # Berkeley Fast Filesystem 151file-system NFS # Sun NFS-compatible filesystem client 152file-system KERNFS # kernel data-structure filesystem 153#file-system NULLFS # NULL layered filesystem 154#file-system OVERLAY # overlay file system 155#file-system MFS # memory-based filesystem 156#file-system FDESC # user file descriptor filesystem 157#file-system UMAPFS # uid/gid remapping filesystem 158#file-system LFS # Log-based filesystem (still experimental) 159#file-system PORTAL # portal filesystem (still experimental) 160file-system PROCFS # /proc 161#file-system CD9660 # ISO 9660 + Rock Ridge file system 162#file-system UNION # union file system 163#file-system MSDOSFS # MS-DOS FAT filesystem(s). 164#file-system CODA # Coda File System; also needs vcoda (below) 165 166## File system options. 167#options NFSSERVER # Sun NFS-compatible filesystem server 168#options QUOTA # FFS quotas 169#options FFS_EI # FFS Endian Independent support 170#options SOFTDEP # FFS soft updates support. 171 172## Network protocol support. In most environments, INET is required. 173options INET # IP (Internet Protocol) v4 174#options INET6 # IPV6 175#options IPSEC # IP security 176#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 177#options IPSEC_DEBUG # debug for IP security 178#options GATEWAY # packet forwarding ("router switch") 179#options MROUTING # packet forwarding of multicast packets 180#options DIRECTED_BROADCAST # allow broadcasts through routers 181#options NS # Xerox NS networking 182#options NSIP # Xerox NS tunneling over IP 183#options ISO,TPIP # OSI networking 184#options EON # OSI tunneling over IP 185#options CCITT,LLC,HDLC # X.25 packet switched protocol 186#options NETATALK # AppleTalk (over Ethernet) protocol 187#options NTP # Network Time Protocol in-kernel support 188#options PPS_SYNC # Add serial line synchronization for NTP 189#options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs. 190#options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device 191#options PPP_BSDCOMP # Add BSD compression to ppp device 192#options PPP_DEFLATE # Add deflate (libz) compression to ppp device 193#options PPP_FILTER # Add active filters for ppp (via bpf) 194 195 196 197#### Main bus and CPU .. all systems. 198mainbus0 at root 199cpu0 at mainbus0 200 201#### Bus types found on SPARC systems. 202 203msiiep0 at mainbus0 # microSPARC-IIep PCIC, timer, ... 204 205mspcic0 at msiiep0 # PCI tree 206pci0 at mspcic0 207options PCIVERBOSE 208#options PCI_CONFIG_DUMP # hangs reading IGA1682 config past offset 64 209 210ebus0 at pci0 # ebus devices 211 212 213#### Standard system devices -- all required for a given architecture 214 215# timer is part of ms-IIep PCIC 216timer0 at msiiep0 217 218## ds1287 TOD clock at EBus 219rtc0 at ebus0 220 221#### Serial port configuration 222 223# XXX: uwe: needs a work-around applied to comstart() 224## NS16x50 serial chips and clones. 225com* at ebus0 226 227 228#### Disk controllers and disks 229 230## A disk-like interface to files. Can be used to create floppy, CD, 231## miniroot images, etc. 232 233#pseudo-device vnd 4 234 235## Memory disk device, used on boot floppies with compressed 236## kernel-plus-root-disk images. 237 238#pseudo-device md 1 239 240 241#### Network interfaces 242 243## Happy Meal Ethernet 244hme* at pci? dev ? function ? # network "hme" compatible 245 246# MII/PHY support 247qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs 248 249## Loopback network interface; required 250pseudo-device loop 251 252## SLIP and CSLIP interfaces, for IP over a serial line. 253#pseudo-device sl 2 254 255## PPP, the successor to SLIP. See pppd(8). 256#pseudo-device ppp 2 257 258## PPP over Ethernet (RFC 2516) 259#pseudo-device pppoe 260 261## Network "tunnel" device, allowing protocol stacks to run in the userland. 262## This is used by the third-party user-mode "ppp" program, and others. 263#pseudo-device tun 4 264 265## Generic L3 over IP tunnel 266#pseudo-device gre 2 # generic L3 over IP tunnel 267 268## Berkeley Packet Filter, required to run RARPD. A generic C-language 269## interface that allows selective examining of incoming packets. 270pseudo-device bpfilter 8 271 272## IP Filter, used in firewall and NAT applications. See ipnat(8) for 273## one example of the use of the IP Filter. 274#pseudo-device ipfilter 275 276## for IPv6 277#pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 278#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 279#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 280 281## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 282#pseudo-device vlan 283 284#### Audio and video devices 285 286## /dev/audio support 287audiocs0 at ebus? # SUNW,CS4231 288audio* at audiocs0 289 290 291#### Other device configuration 292 293## Pseudo ttys, required for network logins and programs like screen. 294 295pseudo-device pty # pseudo-terminals 296 297## Random device, used to implement /dev/random (a source of random noise), 298## and generate randomness for some kernel formulae. 299 300pseudo-device rnd 301 302# a pseudo device needed for Coda # also needs CODA (above) 303#pseudo-device vcoda 4 # coda minicache <-> venus comm. 304 305pseudo-device clockctl # user control of clock subsystem 306