1# $NetBSD: KRUPS,v 1.81 2019/04/26 22:46:04 sevan Exp $
2# From: NetBSD: GENERIC,v 1.197 2006/12/04 23:43:35 elad Exp
3#
4# Krups (JavaStation-NC) machine description file
5#
6
7include 	"arch/sparc/conf/std.sparc"
8
9options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
10
11#ident 		"KRUPS-$Revision: 1.81 $"
12
13maxusers	32
14
15## System kernel configuration.  See options(4) for more detail.
16
17
18# Options for variants of the Sun SPARC architecure.
19# We currently support three architecture types; at least one is required.
20options 	SUN4M		# sun4m - SS10, SS20, Classic, etc.
21
22# microSPARC-IIep is PCI based sun4m (JavaStation-NC, CP1200, etc)
23# This option selects if SUN4M means "normal" 4m or IIep.  Kernels
24# with this option turned on will refuse to work on normal 4m.
25options 	MSIIEP		# microSPARC-IIep
26
27# XXX: uwe: PROM location conflicts with kernel VA space !!!
28options 	PROM_AT_F0
29makeoptions	TEXTADDR=E8004000
30
31
32## System options specific to the sparc machine type
33
34# Blink the power LED on some machines to indicate the system load.
35options 	BLINK
36
37
38#### System options that are the same for all ports
39
40## Root device configuration: change the ?'s if you are going to use a
41## nonstandard root partition (other than where the kernel is booted from)
42## and/or nonstandard root type (not ffs or nfs).  Normally this can be
43## automagically determined at boot time.
44
45config		netbsd	root on ? type ?
46
47## System call tracing (see ktrace(1)).
48options 	KTRACE
49
50## System V compatible IPC subsystem.  (msgctl(2), semctl(2), and shmctl(2))
51options 	SYSVMSG		# System V message queues
52options 	SYSVSEM		# System V semaphores
53#options 	SEMMNI=10	# number of semaphore identifiers
54#options 	SEMMNS=60	# number of semaphores in system
55#options 	SEMUME=10	# max number of undo entries per process
56#options 	SEMMNU=30	# number of undo structures in system
57options 	SYSVSHM		# System V shared memory
58
59#options 	USERCONF	# userconf(4) support
60#options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
61options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel
62
63## NFS boot options; tries DHCP/BOOTP then BOOTPARAM
64options 	NFS_BOOT_BOOTPARAM
65#options 	NFS_BOOT_BOOTP
66options 	NFS_BOOT_DHCP
67
68
69#### wscons options
70
71# builtin terminal emulations
72#options 	WSEMUL_SUN		# sun terminal emulation
73options 	WSEMUL_VT100		# VT100 / VT220 emulation
74options 	WSEMUL_DEFAULT="\"vt100\""
75
76# customization of console and kernel output - see dev/wscons/wsdisplayvar.h
77options 	WSDISPLAY_CUSTOM_OUTPUT	# color customization from wsconsctl(8)
78#options 	WS_DEFAULT_FG=WSCOL_WHITE
79#options 	WS_DEFAULT_BG=WSCOL_BLACK
80#options 	WS_DEFAULT_COLATTR="(0)"
81options 	WS_KERNEL_FG=WSCOL_GREEN
82#options 	WS_KERNEL_BG=WSCOL_BLACK
83options 	WS_KERNEL_COLATTR=WSATTR_HILIT
84
85# customization of console border color
86options 	WSDISPLAY_CUSTOM_BORDER	# custom border colors via wsconsctl(8)
87#options 	WSDISPLAY_BORDER_COLOR=WSCOL_BLUE	# default color
88
89# compatibility to other console drivers
90options 	WSDISPLAY_COMPAT_PCVT		# emulate some ioctls
91options 	WSDISPLAY_COMPAT_SYSCONS	# emulate some ioctls
92options 	WSDISPLAY_COMPAT_USL		# wsconscfg VT handling
93options 	WSDISPLAY_COMPAT_RAWKBD		# can get raw scancodes
94
95options 	FONT_GALLANT12x22		# PROM font look-alike
96
97#options 	WSKBD_EVENT_AUTOREPEAT		# auto repeat in event mode
98#options 	WSKBD_USONLY			# strip off non-US keymaps
99
100# see dev/pckbport/wskbdmap_mfii.c for implemented layouts
101#options 	PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
102
103# allocate a number of virtual screens at autoconfiguration time
104#options 	WSDISPLAY_DEFAULTSCREENS=4
105
106
107#### Debugging options
108
109## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at
110## serial console break or keyboard reset, where the PROM would normally
111## intercept.  DDB_HISTORY_SIZE adds up/down arrow command history.
112options 	DDB			# kernel dynamic debugger
113options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
114#options 	DDB_ONPANIC=1		# see also sysctl(7): `ddb.onpanic'
115
116## You may also use gdb, on another computer connected to this machine over
117## a serial port.  Both KGDB_DEV and KGDB_DEVRATE should be specified;
118## KGDB_DEV is a dev_t encoded device number of the serial port to use, where
119## the minor device number encodes the PROM enumeration of the serial ports,
120## i.e.:
121## 0xc00 = ttya, 0xc01 = ttyb, 0xc02 = ttyc, 0xc03 = ttyd.
122## (Note: ttyc and ttyd are available only on some sun4 models)
123#options 	KGDB			# support for kernel gdb
124#options 	KGDB_DEV=0xc01		# kgdb device number (this is `ttyb')
125#options 	KGDB_DEVRATE=38400	# baud rate
126
127
128## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file),
129## such that gdb(1) can be used on a kernel coredump.
130
131#makeoptions	DEBUG="-g"
132makeoptions	CPUFLAGS="-mcpu=supersparc"
133
134
135## Adds code to the kernel that does internal consistency checks, and will
136## cause the kernel to panic if corruption of internal data structures
137## is detected.
138#options 	DIAGNOSTIC	# extra kernel sanity checking
139
140## Enable (possibly expensive) debugging code that may also display messages
141## on the system console
142#options 	DEBUG
143#options 	LOCKDEBUG
144#options 	SYSCALL_DEBUG
145
146options 	MIIVERBOSE	# verbose PHY autoconfig messages
147
148## `INSECURE' turns off the kernel security level (securelevel = 0 always).
149## This allows writing to /dev/mem, loading kernel modules while multi-user,
150## and other insecurities good only for development work.  Do not use this
151## option on a production machine.
152#options 	INSECURE
153
154## `FDSCRIPTS' allows non-readable but executable scripts by providing a
155## pre-opened opaque file to the script interpreter.  `SETUIDSCRIPTS',
156## which implies FDSCRIPTS, allows scripts to be set-user-id using the same
157## opaque file mechanism.  Perl calls this "secure setuid scripts."
158
159#options 	FDSCRIPTS
160#options 	SETUIDSCRIPTS
161
162## Options for compatibility with previous releases foreign system binaries.
163## In the cases of COMPAT_SUNOS, you may need to set up additional user-level
164## utilities or system configuration files. See compat_sunos(8).
165
166include 	"conf/compat_netbsd10.config"
167options 	COMPAT_SUNOS	# SunOS 4.x binary compatibility
168
169## File systems.  You probably need at least one of FFS or NFS.
170file-system	FFS		# Berkeley Fast Filesystem
171file-system	NFS		# Sun NFS-compatible filesystem client
172file-system	KERNFS		# kernel data-structure filesystem
173file-system	NULLFS		# NULL layered filesystem
174file-system 	OVERLAY		# overlay file system
175file-system	MFS		# memory-based filesystem
176file-system	FDESC		# user file descriptor filesystem
177file-system	UMAPFS		# uid/gid remapping filesystem
178#file-system	LFS		# Log-based filesystem (still experimental)
179file-system	PUFFS		# Userspace file systems (e.g. ntfs-3g & sshfs)
180file-system	PROCFS		# /proc
181#file-system	CD9660		# ISO 9660 + Rock Ridge file system
182file-system	UNION		# union file system
183#file-system	MSDOSFS		# MS-DOS FAT filesystem(s).
184#file-system	CODA		# Coda File System; also needs vcoda (below)
185file-system	PTYFS		# /dev/pts/N support
186#file-system	TMPFS		# Efficient memory file-system
187#file-system	UDF		# experimental - OSTA UDF CD/DVD file-system
188
189## File system options.
190#options 	NFSSERVER	# Sun NFS-compatible filesystem server
191#options 	QUOTA		# legacy UFS quotas
192#options 	QUOTA2		# new, in-filesystem UFS quotas
193#options 	FFS_EI		# FFS Endian Independent support
194options 	FFS_NO_SNAPSHOT	# No FFS snapshot support
195
196## Network protocol support.  In most environments, INET is required.
197options 	INET		# IP (Internet Protocol) v4
198options 	INET6		# IPV6
199#options 	IPSEC		# IP security
200#options 	IPSEC_DEBUG	# debug for IP security
201#options 	GATEWAY		# packet forwarding ("router switch")
202#options 	MROUTING	# packet forwarding of multicast packets
203#options 	PIM		# Protocol Independent Multicast
204#options 	NETATALK	# AppleTalk (over Ethernet) protocol
205options 	NTP		# Network Time Protocol in-kernel support
206#options 	PPS_SYNC	# Add serial line synchronization for NTP
207options 	PPP_BSDCOMP	# Add BSD compression to ppp device
208options 	PPP_DEFLATE	# Add deflate (libz) compression to ppp device
209options 	PPP_FILTER	# Add active filters for ppp (via bpf)
210
211
212
213#### Main bus and CPU .. all systems.
214mainbus0 at root
215cpu0	at mainbus0
216
217#### Bus types found on SPARC systems.
218
219msiiep0	at mainbus0	# microSPARC-IIep PCIC, timer, ...
220
221mspcic0	at msiiep0	# PCI tree
222pci0	at mspcic0
223options 	PCIVERBOSE
224#options 	PCI_CONFIG_DUMP	# hangs reading IGA1682 config past offset 64
225
226ebus*	at pci?	dev ? function ?		# ebus devices
227
228
229#### Standard system devices -- all required for a given architecture
230
231# timer is part of ms-IIep PCIC
232timer0	at msiiep0
233
234## ds1287 TOD clock at EBus
235rtc*	at ebus?
236
237#### Serial port configuration
238
239## NS16x50 serial chips and clones.
240com*	at ebus?
241
242
243#### Disk controllers and disks
244
245## A disk-like interface to files.  Can be used to create floppy, CD,
246## miniroot images, etc.
247
248#pseudo-device	vnd	
249#options 	VND_COMPRESSION		# compressed vnd(4)
250
251## Memory disk device, used on boot floppies with compressed
252## kernel-plus-root-disk images.
253
254#pseudo-device	md	
255
256
257#### Network interfaces
258
259## Happy Meal Ethernet
260hme*		at pci?	dev ? function ?	# network "hme" compatible
261
262# MII/PHY support
263qsphy*		at mii? phy ?		# Quality Semiconductor QS6612 PHYs
264
265## Loopback network interface; required
266pseudo-device	loop
267
268## SLIP and CSLIP interfaces, for IP over a serial line.
269#pseudo-device	sl		
270
271## PPP, the successor to SLIP.  See pppd(8).
272#pseudo-device	ppp		
273
274## PPP over Ethernet (RFC 2516)
275#pseudo-device	pppoe
276
277## Network "tunnel" device, allowing protocol stacks to run in the userland.
278## This is used by the third-party user-mode "ppp" program, and others.
279#pseudo-device	tun		
280#pseudo-device	tap			# virtual Ethernet
281
282## Generic L3 over IP tunnel
283#pseudo-device	gre			# generic L3 over IP tunnel
284
285## Berkeley Packet Filter, required to run RARPD.  A generic C-language
286## interface that allows selective examining of incoming packets.
287pseudo-device	bpfilter
288
289#pseudo-device	carp			# Common Address Redundancy Protocol
290
291#pseudo-device	npf			# NPF packet filter
292
293## for IPv6
294#pseudo-device	gif			# IPv[46] over IPv[46] tunnel (RFC1933)
295#pseudo-device	faith			# IPv[46] tcp relay translation i/f
296#pseudo-device	stf			# 6to4 IPv6 over IPv4 encapsulation
297
298## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4).
299#pseudo-device	vlan
300
301#### Audio and video devices
302
303## /dev/audio support
304audiocs*	at ebus?		# SUNW,CS4231
305audio*		at audiocs?
306
307spkr*		at audio?		# PC speaker (synthesized)
308
309# wscons
310pckbc*		at ebus?		# PC keyboard controller
311pckbd*		at pckbc?		# PC keyboard
312pms*		at pckbc?		# PS/2 mouse for wsmouse
313igsfb*		at pci? dev ? function ?
314wsdisplay*	at igsfb? console ?
315wskbd* 		at pckbd? console ?
316wsmouse*	at pms? mux 0
317
318
319#### Other device configuration
320
321## Pseudo ttys, required for network logins and programs like screen.
322
323pseudo-device	pty			# pseudo-terminals
324
325## Random device, used to implement /dev/random (a source of random noise),
326## and generate randomness for some kernel formulae.
327
328
329# a pseudo device needed for Coda	# also needs CODA (above)
330#pseudo-device	vcoda			# coda minicache <-> venus comm.
331
332# wscons pseudo-devices
333pseudo-device	wsmux			# mouse & keyboard multiplexor
334pseudo-device	wsfont
335
336pseudo-device	clockctl		# user control of clock subsystem
337pseudo-device	drvctl			# user control of drive subsystem
338pseudo-device	ksyms			# /dev/ksyms
339pseudo-device	putter			# for puffs and pud
340
341#pseudo-device	fss			# file system snapshot device
342
343# Veriexec
344# include "dev/veriexec.config"
345
346#options PAX_MPROTECT=0			# PaX mprotect(2) restrictions
347					# (for static binaries only for now)
348