if_sq.c revision 1.53
1/* $NetBSD: if_sq.c,v 1.53 2020/01/29 05:37:08 thorpej Exp $ */ 2 3/* 4 * Copyright (c) 2001 Rafal K. Boni 5 * Copyright (c) 1998, 1999, 2000 The NetBSD Foundation, Inc. 6 * All rights reserved. 7 * 8 * Portions of this code are derived from software contributed to The 9 * NetBSD Foundation by Jason R. Thorpe of the Numerical Aerospace 10 * Simulation Facility, NASA Ames Research Center. 11 * 12 * Redistribution and use in source and binary forms, with or without 13 * modification, are permitted provided that the following conditions 14 * are met: 15 * 1. Redistributions of source code must retain the above copyright 16 * notice, this list of conditions and the following disclaimer. 17 * 2. Redistributions in binary form must reproduce the above copyright 18 * notice, this list of conditions and the following disclaimer in the 19 * documentation and/or other materials provided with the distribution. 20 * 3. The name of the author may not be used to endorse or promote products 21 * derived from this software without specific prior written permission. 22 * 23 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 24 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 25 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 26 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 27 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 28 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 29 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 30 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 32 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35#include <sys/cdefs.h> 36__KERNEL_RCSID(0, "$NetBSD: if_sq.c,v 1.53 2020/01/29 05:37:08 thorpej Exp $"); 37 38 39#include <sys/param.h> 40#include <sys/systm.h> 41#include <sys/device.h> 42#include <sys/callout.h> 43#include <sys/mbuf.h> 44#include <sys/malloc.h> 45#include <sys/kernel.h> 46#include <sys/socket.h> 47#include <sys/ioctl.h> 48#include <sys/errno.h> 49#include <sys/syslog.h> 50 51#include <uvm/uvm_extern.h> 52 53#include <machine/endian.h> 54 55#include <net/if.h> 56#include <net/if_dl.h> 57#include <net/if_media.h> 58#include <net/if_ether.h> 59 60#include <net/bpf.h> 61 62#include <sys/bus.h> 63#include <machine/intr.h> 64#include <machine/sysconf.h> 65 66#include <dev/ic/seeq8003reg.h> 67 68#include <sgimips/hpc/sqvar.h> 69#include <sgimips/hpc/hpcvar.h> 70#include <sgimips/hpc/hpcreg.h> 71 72#include <dev/arcbios/arcbios.h> 73#include <dev/arcbios/arcbiosvar.h> 74 75#define static 76 77/* 78 * Short TODO list: 79 * (1) Do counters for bad-RX packets. 80 * (2) Allow multi-segment transmits, instead of copying to a single, 81 * contiguous mbuf. 82 * (3) Verify sq_stop() turns off enough stuff; I was still getting 83 * seeq interrupts after sq_stop(). 84 * (4) Implement EDLC modes: especially packet auto-pad and simplex 85 * mode. 86 * (5) Should the driver filter out its own transmissions in non-EDLC 87 * mode? 88 * (6) Multicast support -- multicast filter, address management, ... 89 * (7) Deal with RB0 (recv buffer overflow) on reception. Will need 90 * to figure out if RB0 is read-only as stated in one spot in the 91 * HPC spec or read-write (ie, is the 'write a one to clear it') 92 * the correct thing? 93 */ 94 95#if defined(SQ_DEBUG) 96 int sq_debug = 0; 97 #define SQ_DPRINTF(x) if (sq_debug) printf x 98#else 99 #define SQ_DPRINTF(x) 100#endif 101 102static int sq_match(device_t, cfdata_t, void *); 103static void sq_attach(device_t, device_t, void *); 104static int sq_init(struct ifnet *); 105static void sq_start(struct ifnet *); 106static void sq_stop(struct ifnet *, int); 107static void sq_watchdog(struct ifnet *); 108static int sq_ioctl(struct ifnet *, u_long, void *); 109 110static void sq_set_filter(struct sq_softc *); 111static int sq_intr(void *); 112static int sq_rxintr(struct sq_softc *); 113static int sq_txintr(struct sq_softc *); 114static void sq_txring_hpc1(struct sq_softc *); 115static void sq_txring_hpc3(struct sq_softc *); 116static void sq_reset(struct sq_softc *); 117static int sq_add_rxbuf(struct sq_softc *, int); 118static void sq_dump_buffer(paddr_t, psize_t); 119static void sq_trace_dump(struct sq_softc *); 120 121CFATTACH_DECL_NEW(sq, sizeof(struct sq_softc), 122 sq_match, sq_attach, NULL, NULL); 123 124#define ETHER_PAD_LEN (ETHER_MIN_LEN - ETHER_CRC_LEN) 125 126#define sq_seeq_read(sc, off) \ 127 bus_space_read_1(sc->sc_regt, sc->sc_regh, (off << 2) + 3) 128#define sq_seeq_write(sc, off, val) \ 129 bus_space_write_1(sc->sc_regt, sc->sc_regh, (off << 2) + 3, val) 130 131#define sq_hpc_read(sc, off) \ 132 bus_space_read_4(sc->sc_hpct, sc->sc_hpch, off) 133#define sq_hpc_write(sc, off, val) \ 134 bus_space_write_4(sc->sc_hpct, sc->sc_hpch, off, val) 135 136/* MAC address offset for non-onboard implementations */ 137#define SQ_HPC_EEPROM_ENADDR 250 138 139#define SGI_OUI_0 0x08 140#define SGI_OUI_1 0x00 141#define SGI_OUI_2 0x69 142 143static int 144sq_match(device_t parent, cfdata_t cf, void *aux) 145{ 146 struct hpc_attach_args *ha = aux; 147 148 if (strcmp(ha->ha_name, cf->cf_name) == 0) { 149 vaddr_t reset, txstat; 150 151 reset = MIPS_PHYS_TO_KSEG1(ha->ha_sh + 152 ha->ha_dmaoff + ha->hpc_regs->enetr_reset); 153 txstat = MIPS_PHYS_TO_KSEG1(ha->ha_sh + 154 ha->ha_devoff + (SEEQ_TXSTAT << 2)); 155 156 if (platform.badaddr((void *)reset, sizeof(reset))) 157 return 0; 158 159 *(volatile uint32_t *)reset = 0x1; 160 delay(20); 161 *(volatile uint32_t *)reset = 0x0; 162 163 if (platform.badaddr((void *)txstat, sizeof(txstat))) 164 return 0; 165 166 if ((*(volatile uint32_t *)txstat & 0xff) == TXSTAT_OLDNEW) 167 return 1; 168 } 169 170 return 0; 171} 172 173static void 174sq_attach(device_t parent, device_t self, void *aux) 175{ 176 int i, err; 177 const char* macaddr; 178 struct sq_softc *sc = device_private(self); 179 struct hpc_attach_args *haa = aux; 180 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 181 182 sc->sc_dev = self; 183 sc->sc_hpct = haa->ha_st; 184 sc->hpc_regs = haa->hpc_regs; /* HPC register definitions */ 185 186 if ((err = bus_space_subregion(haa->ha_st, haa->ha_sh, 187 haa->ha_dmaoff, sc->hpc_regs->enet_regs_size, 188 &sc->sc_hpch)) != 0) { 189 printf(": unable to map HPC DMA registers, error = %d\n", err); 190 goto fail_0; 191 } 192 193 sc->sc_regt = haa->ha_st; 194 if ((err = bus_space_subregion(haa->ha_st, haa->ha_sh, 195 haa->ha_devoff, sc->hpc_regs->enet_devregs_size, 196 &sc->sc_regh)) != 0) { 197 printf(": unable to map Seeq registers, error = %d\n", err); 198 goto fail_0; 199 } 200 201 sc->sc_dmat = haa->ha_dmat; 202 203 if ((err = bus_dmamem_alloc(sc->sc_dmat, sizeof(struct sq_control), 204 PAGE_SIZE, PAGE_SIZE, &sc->sc_cdseg, 1, &sc->sc_ncdseg, 205 BUS_DMA_NOWAIT)) != 0) { 206 printf(": unable to allocate control data, error = %d\n", err); 207 goto fail_0; 208 } 209 210 if ((err = bus_dmamem_map(sc->sc_dmat, &sc->sc_cdseg, sc->sc_ncdseg, 211 sizeof(struct sq_control), (void **)&sc->sc_control, 212 BUS_DMA_NOWAIT | BUS_DMA_COHERENT)) != 0) { 213 printf(": unable to map control data, error = %d\n", err); 214 goto fail_1; 215 } 216 217 if ((err = bus_dmamap_create(sc->sc_dmat, 218 sizeof(struct sq_control), 1, sizeof(struct sq_control), PAGE_SIZE, 219 BUS_DMA_NOWAIT, &sc->sc_cdmap)) != 0) { 220 printf(": unable to create DMA map for control data, error " 221 "= %d\n", err); 222 goto fail_2; 223 } 224 225 if ((err = bus_dmamap_load(sc->sc_dmat, sc->sc_cdmap, 226 sc->sc_control, sizeof(struct sq_control), NULL, 227 BUS_DMA_NOWAIT)) != 0) { 228 printf(": unable to load DMA map for control data, error " 229 "= %d\n", err); 230 goto fail_3; 231 } 232 233 memset(sc->sc_control, 0, sizeof(struct sq_control)); 234 235 /* Create transmit buffer DMA maps */ 236 for (i = 0; i < SQ_NTXDESC; i++) { 237 if ((err = bus_dmamap_create(sc->sc_dmat, 238 MCLBYTES, 1, MCLBYTES, 0, 239 BUS_DMA_NOWAIT, &sc->sc_txmap[i])) != 0) { 240 printf(": unable to create tx DMA map %d, error = %d\n", 241 i, err); 242 goto fail_4; 243 } 244 } 245 246 /* Create receive buffer DMA maps */ 247 for (i = 0; i < SQ_NRXDESC; i++) { 248 if ((err = bus_dmamap_create(sc->sc_dmat, 249 MCLBYTES, 1, MCLBYTES, 0, 250 BUS_DMA_NOWAIT, &sc->sc_rxmap[i])) != 0) { 251 printf(": unable to create rx DMA map %d, error = %d\n", 252 i, err); 253 goto fail_5; 254 } 255 } 256 257 /* Pre-allocate the receive buffers. */ 258 for (i = 0; i < SQ_NRXDESC; i++) { 259 if ((err = sq_add_rxbuf(sc, i)) != 0) { 260 printf(": unable to allocate or map rx buffer %d\n," 261 " error = %d\n", i, err); 262 goto fail_6; 263 } 264 } 265 266 memcpy(sc->sc_enaddr, &haa->hpc_eeprom[SQ_HPC_EEPROM_ENADDR], 267 ETHER_ADDR_LEN); 268 269 /* 270 * If our mac address is bogus, obtain it from ARCBIOS. This will 271 * be true of the onboard HPC3 on IP22, since there is no eeprom, 272 * but rather the DS1386 RTC's battery-backed ram is used. 273 */ 274 if (sc->sc_enaddr[0] != SGI_OUI_0 || 275 sc->sc_enaddr[1] != SGI_OUI_1 || 276 sc->sc_enaddr[2] != SGI_OUI_2) { 277 macaddr = arcbios_GetEnvironmentVariable("eaddr"); 278 if (macaddr == NULL) { 279 printf(": unable to get MAC address!\n"); 280 goto fail_6; 281 } 282 ether_aton_r(sc->sc_enaddr, sizeof(sc->sc_enaddr), macaddr); 283 } 284 285 evcnt_attach_dynamic(&sc->sq_intrcnt, EVCNT_TYPE_INTR, NULL, 286 device_xname(self), "intr"); 287 288 if ((cpu_intr_establish(haa->ha_irq, IPL_NET, sq_intr, sc)) == NULL) { 289 printf(": unable to establish interrupt!\n"); 290 goto fail_6; 291 } 292 293 /* Reset the chip to a known state. */ 294 sq_reset(sc); 295 296 /* 297 * Determine if we're an 8003 or 80c03 by setting the first 298 * MAC address register to non-zero, and then reading it back. 299 * If it's zero, we have an 80c03, because we will have read 300 * the TxCollLSB register. 301 */ 302 sq_seeq_write(sc, SEEQ_TXCOLLS0, 0xa5); 303 if (sq_seeq_read(sc, SEEQ_TXCOLLS0) == 0) 304 sc->sc_type = SQ_TYPE_80C03; 305 else 306 sc->sc_type = SQ_TYPE_8003; 307 sq_seeq_write(sc, SEEQ_TXCOLLS0, 0x00); 308 309 printf(": SGI Seeq %s\n", 310 sc->sc_type == SQ_TYPE_80C03 ? "80c03" : "8003"); 311 312 printf("%s: Ethernet address %s\n", 313 device_xname(self), ether_sprintf(sc->sc_enaddr)); 314 315 strcpy(ifp->if_xname, device_xname(self)); 316 ifp->if_softc = sc; 317 ifp->if_mtu = ETHERMTU; 318 ifp->if_init = sq_init; 319 ifp->if_stop = sq_stop; 320 ifp->if_start = sq_start; 321 ifp->if_ioctl = sq_ioctl; 322 ifp->if_watchdog = sq_watchdog; 323 ifp->if_flags = IFF_BROADCAST | IFF_MULTICAST; 324 IFQ_SET_READY(&ifp->if_snd); 325 326 if_attach(ifp); 327 if_deferred_start_init(ifp, NULL); 328 ether_ifattach(ifp, sc->sc_enaddr); 329 330 memset(&sc->sq_trace, 0, sizeof(sc->sq_trace)); 331 /* Done! */ 332 return; 333 334 /* 335 * Free any resources we've allocated during the failed attach 336 * attempt. Do this in reverse order and fall through. 337 */ 338 fail_6: 339 for (i = 0; i < SQ_NRXDESC; i++) { 340 if (sc->sc_rxmbuf[i] != NULL) { 341 bus_dmamap_unload(sc->sc_dmat, sc->sc_rxmap[i]); 342 m_freem(sc->sc_rxmbuf[i]); 343 } 344 } 345 fail_5: 346 for (i = 0; i < SQ_NRXDESC; i++) { 347 if (sc->sc_rxmap[i] != NULL) 348 bus_dmamap_destroy(sc->sc_dmat, sc->sc_rxmap[i]); 349 } 350 fail_4: 351 for (i = 0; i < SQ_NTXDESC; i++) { 352 if (sc->sc_txmap[i] != NULL) 353 bus_dmamap_destroy(sc->sc_dmat, sc->sc_txmap[i]); 354 } 355 bus_dmamap_unload(sc->sc_dmat, sc->sc_cdmap); 356 fail_3: 357 bus_dmamap_destroy(sc->sc_dmat, sc->sc_cdmap); 358 fail_2: 359 bus_dmamem_unmap(sc->sc_dmat, 360 (void *)sc->sc_control, sizeof(struct sq_control)); 361 fail_1: 362 bus_dmamem_free(sc->sc_dmat, &sc->sc_cdseg, sc->sc_ncdseg); 363 fail_0: 364 return; 365} 366 367/* Set up data to get the interface up and running. */ 368int 369sq_init(struct ifnet *ifp) 370{ 371 int i; 372 struct sq_softc *sc = ifp->if_softc; 373 374 /* Cancel any in-progress I/O */ 375 sq_stop(ifp, 0); 376 377 sc->sc_nextrx = 0; 378 379 sc->sc_nfreetx = SQ_NTXDESC; 380 sc->sc_nexttx = sc->sc_prevtx = 0; 381 382 SQ_TRACE(SQ_RESET, sc, 0, 0); 383 384 /* Set into 8003 mode, bank 0 to program ethernet address */ 385 sq_seeq_write(sc, SEEQ_TXCMD, TXCMD_BANK0); 386 387 /* Now write the address */ 388 for (i = 0; i < ETHER_ADDR_LEN; i++) 389 sq_seeq_write(sc, i, sc->sc_enaddr[i]); 390 391 sc->sc_rxcmd = 392 RXCMD_IE_CRC | 393 RXCMD_IE_DRIB | 394 RXCMD_IE_SHORT | 395 RXCMD_IE_END | 396 RXCMD_IE_GOOD; 397 398 /* 399 * Set the receive filter -- this will add some bits to the 400 * prototype RXCMD register. Do this before setting the 401 * transmit config register, since we might need to switch 402 * banks. 403 */ 404 sq_set_filter(sc); 405 406 /* Set up Seeq transmit command register */ 407 sq_seeq_write(sc, SEEQ_TXCMD, 408 TXCMD_IE_UFLOW | 409 TXCMD_IE_COLL | 410 TXCMD_IE_16COLL | 411 TXCMD_IE_GOOD); 412 413 /* Now write the receive command register. */ 414 sq_seeq_write(sc, SEEQ_RXCMD, sc->sc_rxcmd); 415 416 /* 417 * Set up HPC ethernet PIO and DMA configurations. 418 * 419 * The PROM appears to do most of this for the onboard HPC3, but 420 * not for the Challenge S's IOPLUS chip. We copy how the onboard 421 * chip is configured and assume that it's correct for both. 422 */ 423 if (sc->hpc_regs->revision == 3) { 424 uint32_t dmareg, pioreg; 425 426 pioreg = 427 HPC3_ENETR_PIOCFG_P1(1) | 428 HPC3_ENETR_PIOCFG_P2(6) | 429 HPC3_ENETR_PIOCFG_P3(1); 430 431 dmareg = 432 HPC3_ENETR_DMACFG_D1(6) | 433 HPC3_ENETR_DMACFG_D2(2) | 434 HPC3_ENETR_DMACFG_D3(0) | 435 HPC3_ENETR_DMACFG_FIX_RXDC | 436 HPC3_ENETR_DMACFG_FIX_INTR | 437 HPC3_ENETR_DMACFG_FIX_EOP | 438 HPC3_ENETR_DMACFG_TIMEOUT; 439 440 sq_hpc_write(sc, HPC3_ENETR_PIOCFG, pioreg); 441 sq_hpc_write(sc, HPC3_ENETR_DMACFG, dmareg); 442 } 443 444 /* Pass the start of the receive ring to the HPC */ 445 sq_hpc_write(sc, sc->hpc_regs->enetr_ndbp, SQ_CDRXADDR(sc, 0)); 446 447 /* And turn on the HPC ethernet receive channel */ 448 sq_hpc_write(sc, sc->hpc_regs->enetr_ctl, 449 sc->hpc_regs->enetr_ctl_active); 450 451 /* 452 * Turn off delayed receive interrupts on HPC1. 453 * (see Hollywood HPC Specification 2.1.4.3) 454 */ 455 if (sc->hpc_regs->revision != 3) 456 sq_hpc_write(sc, HPC1_ENET_INTDELAY, HPC1_ENET_INTDELAY_OFF); 457 458 ifp->if_flags |= IFF_RUNNING; 459 ifp->if_flags &= ~IFF_OACTIVE; 460 461 return 0; 462} 463 464static void 465sq_set_filter(struct sq_softc *sc) 466{ 467 struct ethercom *ec = &sc->sc_ethercom; 468 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 469 struct ether_multi *enm; 470 struct ether_multistep step; 471 472 /* 473 * Check for promiscuous mode. Also implies 474 * all-multicast. 475 */ 476 if (ifp->if_flags & IFF_PROMISC) { 477 sc->sc_rxcmd |= RXCMD_REC_ALL; 478 ifp->if_flags |= IFF_ALLMULTI; 479 return; 480 } 481 482 /* 483 * The 8003 has no hash table. If we have any multicast 484 * addresses on the list, enable reception of all multicast 485 * frames. 486 * 487 * XXX The 80c03 has a hash table. We should use it. 488 */ 489 490 ETHER_FIRST_MULTI(step, ec, enm); 491 492 if (enm == NULL) { 493 sc->sc_rxcmd &= ~RXCMD_REC_MASK; 494 sc->sc_rxcmd |= RXCMD_REC_BROAD; 495 496 ifp->if_flags &= ~IFF_ALLMULTI; 497 return; 498 } 499 500 sc->sc_rxcmd |= RXCMD_REC_MULTI; 501 ifp->if_flags |= IFF_ALLMULTI; 502} 503 504int 505sq_ioctl(struct ifnet *ifp, u_long cmd, void *data) 506{ 507 int s, error = 0; 508 509 SQ_TRACE(SQ_IOCTL, (struct sq_softc *)ifp->if_softc, 0, 0); 510 511 s = splnet(); 512 513 error = ether_ioctl(ifp, cmd, data); 514 if (error == ENETRESET) { 515 /* 516 * Multicast list has changed; set the hardware filter 517 * accordingly. 518 */ 519 if (ifp->if_flags & IFF_RUNNING) 520 error = sq_init(ifp); 521 else 522 error = 0; 523 } 524 525 splx(s); 526 return error; 527} 528 529void 530sq_start(struct ifnet *ifp) 531{ 532 struct sq_softc *sc = ifp->if_softc; 533 uint32_t status; 534 struct mbuf *m0, *m; 535 bus_dmamap_t dmamap; 536 int err, totlen, nexttx, firsttx, lasttx = -1, ofree, seg; 537 538 if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING) 539 return; 540 541 /* 542 * Remember the previous number of free descriptors and 543 * the first descriptor we'll use. 544 */ 545 ofree = sc->sc_nfreetx; 546 firsttx = sc->sc_nexttx; 547 548 /* 549 * Loop through the send queue, setting up transmit descriptors 550 * until we drain the queue, or use up all available transmit 551 * descriptors. 552 */ 553 while (sc->sc_nfreetx != 0) { 554 /* 555 * Grab a packet off the queue. 556 */ 557 IFQ_POLL(&ifp->if_snd, m0); 558 if (m0 == NULL) 559 break; 560 m = NULL; 561 562 dmamap = sc->sc_txmap[sc->sc_nexttx]; 563 564 /* 565 * Load the DMA map. If this fails, the packet either 566 * didn't fit in the alloted number of segments, or we were 567 * short on resources. In this case, we'll copy and try 568 * again. 569 * Also copy it if we need to pad, so that we are sure there 570 * is room for the pad buffer. 571 * XXX the right way of doing this is to use a static buffer 572 * for padding and adding it to the transmit descriptor (see 573 * sys/dev/pci/if_tl.c for example). We can't do this here yet 574 * because we can't send packets with more than one fragment. 575 */ 576 if (m0->m_pkthdr.len < ETHER_PAD_LEN || 577 bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m0, 578 BUS_DMA_NOWAIT) != 0) { 579 MGETHDR(m, M_DONTWAIT, MT_DATA); 580 if (m == NULL) { 581 printf("%s: unable to allocate Tx mbuf\n", 582 device_xname(sc->sc_dev)); 583 break; 584 } 585 if (m0->m_pkthdr.len > MHLEN) { 586 MCLGET(m, M_DONTWAIT); 587 if ((m->m_flags & M_EXT) == 0) { 588 printf("%s: unable to allocate Tx " 589 "cluster\n", 590 device_xname(sc->sc_dev)); 591 m_freem(m); 592 break; 593 } 594 } 595 596 m_copydata(m0, 0, m0->m_pkthdr.len, mtod(m, void *)); 597 if (m0->m_pkthdr.len < ETHER_PAD_LEN) { 598 memset(mtod(m, char *) + m0->m_pkthdr.len, 0, 599 ETHER_PAD_LEN - m0->m_pkthdr.len); 600 m->m_pkthdr.len = m->m_len = ETHER_PAD_LEN; 601 } else 602 m->m_pkthdr.len = m->m_len = m0->m_pkthdr.len; 603 604 if ((err = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, 605 m, BUS_DMA_NOWAIT)) != 0) { 606 printf("%s: unable to load Tx buffer, " 607 "error = %d\n", 608 device_xname(sc->sc_dev), err); 609 break; 610 } 611 } 612 613 /* 614 * Ensure we have enough descriptors free to describe 615 * the packet. 616 */ 617 if (dmamap->dm_nsegs > sc->sc_nfreetx) { 618 /* 619 * Not enough free descriptors to transmit this 620 * packet. We haven't committed to anything yet, 621 * so just unload the DMA map, put the packet 622 * back on the queue, and punt. Notify the upper 623 * layer that there are no more slots left. 624 * 625 * XXX We could allocate an mbuf and copy, but 626 * XXX it is worth it? 627 */ 628 ifp->if_flags |= IFF_OACTIVE; 629 bus_dmamap_unload(sc->sc_dmat, dmamap); 630 if (m != NULL) 631 m_freem(m); 632 break; 633 } 634 635 IFQ_DEQUEUE(&ifp->if_snd, m0); 636 /* 637 * Pass the packet to any BPF listeners. 638 */ 639 bpf_mtap(ifp, m0, BPF_D_OUT); 640 if (m != NULL) { 641 m_freem(m0); 642 m0 = m; 643 } 644 645 /* 646 * WE ARE NOW COMMITTED TO TRANSMITTING THE PACKET. 647 */ 648 649 SQ_TRACE(SQ_ENQUEUE, sc, sc->sc_nexttx, 0); 650 651 /* Sync the DMA map. */ 652 bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize, 653 BUS_DMASYNC_PREWRITE); 654 655 /* 656 * Initialize the transmit descriptors. 657 */ 658 for (nexttx = sc->sc_nexttx, seg = 0, totlen = 0; 659 seg < dmamap->dm_nsegs; 660 seg++, nexttx = SQ_NEXTTX(nexttx)) { 661 if (sc->hpc_regs->revision == 3) { 662 sc->sc_txdesc[nexttx].hpc3_hdd_bufptr = 663 dmamap->dm_segs[seg].ds_addr; 664 sc->sc_txdesc[nexttx].hpc3_hdd_ctl = 665 dmamap->dm_segs[seg].ds_len; 666 } else { 667 sc->sc_txdesc[nexttx].hpc1_hdd_bufptr = 668 dmamap->dm_segs[seg].ds_addr; 669 sc->sc_txdesc[nexttx].hpc1_hdd_ctl = 670 dmamap->dm_segs[seg].ds_len; 671 } 672 sc->sc_txdesc[nexttx].hdd_descptr = 673 SQ_CDTXADDR(sc, SQ_NEXTTX(nexttx)); 674 lasttx = nexttx; 675 totlen += dmamap->dm_segs[seg].ds_len; 676 } 677 678 /* Last descriptor gets end-of-packet */ 679 KASSERT(lasttx != -1); 680 if (sc->hpc_regs->revision == 3) 681 sc->sc_txdesc[lasttx].hpc3_hdd_ctl |= 682 HPC3_HDD_CTL_EOPACKET; 683 else 684 sc->sc_txdesc[lasttx].hpc1_hdd_ctl |= 685 HPC1_HDD_CTL_EOPACKET; 686 687 SQ_DPRINTF(("%s: transmit %d-%d, len %d\n", 688 device_xname(sc->sc_dev), sc->sc_nexttx, lasttx, totlen)); 689 690 if (ifp->if_flags & IFF_DEBUG) { 691 printf(" transmit chain:\n"); 692 for (seg = sc->sc_nexttx;; seg = SQ_NEXTTX(seg)) { 693 printf(" descriptor %d:\n", seg); 694 printf(" hdd_bufptr: 0x%08x\n", 695 (sc->hpc_regs->revision == 3) ? 696 sc->sc_txdesc[seg].hpc3_hdd_bufptr : 697 sc->sc_txdesc[seg].hpc1_hdd_bufptr); 698 printf(" hdd_ctl: 0x%08x\n", 699 (sc->hpc_regs->revision == 3) ? 700 sc->sc_txdesc[seg].hpc3_hdd_ctl: 701 sc->sc_txdesc[seg].hpc1_hdd_ctl); 702 printf(" hdd_descptr: 0x%08x\n", 703 sc->sc_txdesc[seg].hdd_descptr); 704 705 if (seg == lasttx) 706 break; 707 } 708 } 709 710 /* Sync the descriptors we're using. */ 711 SQ_CDTXSYNC(sc, sc->sc_nexttx, dmamap->dm_nsegs, 712 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 713 714 /* Store a pointer to the packet so we can free it later */ 715 sc->sc_txmbuf[sc->sc_nexttx] = m0; 716 717 /* Advance the tx pointer. */ 718 sc->sc_nfreetx -= dmamap->dm_nsegs; 719 sc->sc_nexttx = nexttx; 720 } 721 722 /* All transmit descriptors used up, let upper layers know */ 723 if (sc->sc_nfreetx == 0) 724 ifp->if_flags |= IFF_OACTIVE; 725 726 if (sc->sc_nfreetx != ofree) { 727 SQ_DPRINTF(("%s: %d packets enqueued, first %d, INTR on %d\n", 728 device_xname(sc->sc_dev), lasttx - firsttx + 1, 729 firsttx, lasttx)); 730 731 /* 732 * Cause a transmit interrupt to happen on the 733 * last packet we enqueued, mark it as the last 734 * descriptor. 735 * 736 * HPC1_HDD_CTL_INTR will generate an interrupt on 737 * HPC1. HPC3 requires HPC3_HDD_CTL_EOPACKET in 738 * addition to HPC3_HDD_CTL_INTR to interrupt. 739 */ 740 KASSERT(lasttx != -1); 741 if (sc->hpc_regs->revision == 3) { 742 sc->sc_txdesc[lasttx].hpc3_hdd_ctl |= 743 HPC3_HDD_CTL_INTR | HPC3_HDD_CTL_EOCHAIN; 744 } else { 745 sc->sc_txdesc[lasttx].hpc1_hdd_ctl |= HPC1_HDD_CTL_INTR; 746 sc->sc_txdesc[lasttx].hpc1_hdd_bufptr |= 747 HPC1_HDD_CTL_EOCHAIN; 748 } 749 750 SQ_CDTXSYNC(sc, lasttx, 1, 751 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 752 753 /* 754 * There is a potential race condition here if the HPC 755 * DMA channel is active and we try and either update 756 * the 'next descriptor' pointer in the HPC PIO space 757 * or the 'next descriptor' pointer in a previous desc- 758 * riptor. 759 * 760 * To avoid this, if the channel is active, we rely on 761 * the transmit interrupt routine noticing that there 762 * are more packets to send and restarting the HPC DMA 763 * engine, rather than mucking with the DMA state here. 764 */ 765 status = sq_hpc_read(sc, sc->hpc_regs->enetx_ctl); 766 767 if ((status & sc->hpc_regs->enetx_ctl_active) != 0) { 768 SQ_TRACE(SQ_ADD_TO_DMA, sc, firsttx, status); 769 770 /* 771 * NB: hpc3_hdd_ctl == hpc1_hdd_bufptr, and 772 * HPC1_HDD_CTL_EOCHAIN == HPC3_HDD_CTL_EOCHAIN 773 */ 774 sc->sc_txdesc[SQ_PREVTX(firsttx)].hpc3_hdd_ctl &= 775 ~HPC3_HDD_CTL_EOCHAIN; 776 777 if (sc->hpc_regs->revision != 3) 778 sc->sc_txdesc[SQ_PREVTX(firsttx)].hpc1_hdd_ctl 779 &= ~HPC1_HDD_CTL_INTR; 780 781 SQ_CDTXSYNC(sc, SQ_PREVTX(firsttx), 1, 782 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 783 } else if (sc->hpc_regs->revision == 3) { 784 SQ_TRACE(SQ_START_DMA, sc, firsttx, status); 785 786 sq_hpc_write(sc, HPC3_ENETX_NDBP, SQ_CDTXADDR(sc, 787 firsttx)); 788 789 /* Kick DMA channel into life */ 790 sq_hpc_write(sc, HPC3_ENETX_CTL, HPC3_ENETX_CTL_ACTIVE); 791 } else { 792 /* 793 * In the HPC1 case where transmit DMA is 794 * inactive, we can either kick off if 795 * the ring was previously empty, or call 796 * our transmit interrupt handler to 797 * figure out if the ring stopped short 798 * and restart at the right place. 799 */ 800 if (ofree == SQ_NTXDESC) { 801 SQ_TRACE(SQ_START_DMA, sc, firsttx, status); 802 803 sq_hpc_write(sc, HPC1_ENETX_NDBP, 804 SQ_CDTXADDR(sc, firsttx)); 805 sq_hpc_write(sc, HPC1_ENETX_CFXBP, 806 SQ_CDTXADDR(sc, firsttx)); 807 sq_hpc_write(sc, HPC1_ENETX_CBP, 808 SQ_CDTXADDR(sc, firsttx)); 809 810 /* Kick DMA channel into life */ 811 sq_hpc_write(sc, HPC1_ENETX_CTL, 812 HPC1_ENETX_CTL_ACTIVE); 813 } else 814 sq_txring_hpc1(sc); 815 } 816 817 /* Set a watchdog timer in case the chip flakes out. */ 818 ifp->if_timer = 5; 819 } 820} 821 822void 823sq_stop(struct ifnet *ifp, int disable) 824{ 825 int i; 826 struct sq_softc *sc = ifp->if_softc; 827 828 for (i = 0; i < SQ_NTXDESC; i++) { 829 if (sc->sc_txmbuf[i] != NULL) { 830 bus_dmamap_unload(sc->sc_dmat, sc->sc_txmap[i]); 831 m_freem(sc->sc_txmbuf[i]); 832 sc->sc_txmbuf[i] = NULL; 833 } 834 } 835 836 /* Clear Seeq transmit/receive command registers */ 837 sq_seeq_write(sc, SEEQ_TXCMD, 0); 838 sq_seeq_write(sc, SEEQ_RXCMD, 0); 839 840 sq_reset(sc); 841 842 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 843 ifp->if_timer = 0; 844} 845 846/* Device timeout/watchdog routine. */ 847void 848sq_watchdog(struct ifnet *ifp) 849{ 850 uint32_t status; 851 struct sq_softc *sc = ifp->if_softc; 852 853 status = sq_hpc_read(sc, sc->hpc_regs->enetx_ctl); 854 log(LOG_ERR, "%s: device timeout (prev %d, next %d, free %d, " 855 "status %08x)\n", device_xname(sc->sc_dev), sc->sc_prevtx, 856 sc->sc_nexttx, sc->sc_nfreetx, status); 857 858 sq_trace_dump(sc); 859 860 memset(&sc->sq_trace, 0, sizeof(sc->sq_trace)); 861 sc->sq_trace_idx = 0; 862 863 if_statinc(ifp, if_oerrors); 864 865 sq_init(ifp); 866} 867 868static void 869sq_trace_dump(struct sq_softc *sc) 870{ 871 int i; 872 const char *act; 873 874 for (i = 0; i < sc->sq_trace_idx; i++) { 875 switch (sc->sq_trace[i].action) { 876 case SQ_RESET: act = "SQ_RESET"; break; 877 case SQ_ADD_TO_DMA: act = "SQ_ADD_TO_DMA"; break; 878 case SQ_START_DMA: act = "SQ_START_DMA"; break; 879 case SQ_DONE_DMA: act = "SQ_DONE_DMA"; break; 880 case SQ_RESTART_DMA: act = "SQ_RESTART_DMA"; break; 881 case SQ_TXINTR_ENTER: act = "SQ_TXINTR_ENTER"; break; 882 case SQ_TXINTR_EXIT: act = "SQ_TXINTR_EXIT"; break; 883 case SQ_TXINTR_BUSY: act = "SQ_TXINTR_BUSY"; break; 884 case SQ_IOCTL: act = "SQ_IOCTL"; break; 885 case SQ_ENQUEUE: act = "SQ_ENQUEUE"; break; 886 default: act = "UNKNOWN"; 887 } 888 889 printf("%s: [%03d] action %-16s buf %03d free %03d " 890 "status %08x line %d\n", device_xname(sc->sc_dev), i, act, 891 sc->sq_trace[i].bufno, sc->sq_trace[i].freebuf, 892 sc->sq_trace[i].status, sc->sq_trace[i].line); 893 } 894} 895 896static int 897sq_intr(void *arg) 898{ 899 struct sq_softc *sc = arg; 900 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 901 int handled = 0; 902 uint32_t stat; 903 904 stat = sq_hpc_read(sc, sc->hpc_regs->enetr_reset); 905 906 if ((stat & 2) == 0) 907 SQ_DPRINTF(("%s: Unexpected interrupt!\n", 908 device_xname(sc->sc_dev))); 909 else 910 sq_hpc_write(sc, sc->hpc_regs->enetr_reset, (stat | 2)); 911 912 /* 913 * If the interface isn't running, the interrupt couldn't 914 * possibly have come from us. 915 */ 916 if ((ifp->if_flags & IFF_RUNNING) == 0) 917 return 0; 918 919 sc->sq_intrcnt.ev_count++; 920 921 /* Always check for received packets */ 922 if (sq_rxintr(sc) != 0) 923 handled++; 924 925 /* Only handle transmit interrupts if we actually sent something */ 926 if (sc->sc_nfreetx < SQ_NTXDESC) { 927 sq_txintr(sc); 928 handled++; 929 } 930 931 if (handled) 932 rnd_add_uint32(&sc->rnd_source, stat); 933 return handled; 934} 935 936static int 937sq_rxintr(struct sq_softc *sc) 938{ 939 int count = 0; 940 struct mbuf* m; 941 int i, framelen; 942 uint8_t pktstat; 943 uint32_t status; 944 uint32_t ctl_reg; 945 int new_end, orig_end; 946 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 947 948 for (i = sc->sc_nextrx;; i = SQ_NEXTRX(i)) { 949 SQ_CDRXSYNC(sc, i, 950 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 951 952 /* 953 * If this is a CPU-owned buffer, we're at the end of the list. 954 */ 955 if (sc->hpc_regs->revision == 3) 956 ctl_reg = 957 sc->sc_rxdesc[i].hpc3_hdd_ctl & HPC3_HDD_CTL_OWN; 958 else 959 ctl_reg = 960 sc->sc_rxdesc[i].hpc1_hdd_ctl & HPC1_HDD_CTL_OWN; 961 962 if (ctl_reg) { 963#if defined(SQ_DEBUG) 964 uint32_t reg; 965 966 reg = sq_hpc_read(sc, sc->hpc_regs->enetr_ctl); 967 SQ_DPRINTF(("%s: rxintr: done at %d (ctl %08x)\n", 968 device_xname(sc->sc_dev), i, reg)); 969#endif 970 break; 971 } 972 973 count++; 974 975 m = sc->sc_rxmbuf[i]; 976 framelen = m->m_ext.ext_size - 3; 977 if (sc->hpc_regs->revision == 3) 978 framelen -= 979 HPC3_HDD_CTL_BYTECNT(sc->sc_rxdesc[i].hpc3_hdd_ctl); 980 else 981 framelen -= 982 HPC1_HDD_CTL_BYTECNT(sc->sc_rxdesc[i].hpc1_hdd_ctl); 983 984 /* Now sync the actual packet data */ 985 bus_dmamap_sync(sc->sc_dmat, sc->sc_rxmap[i], 0, 986 sc->sc_rxmap[i]->dm_mapsize, BUS_DMASYNC_POSTREAD); 987 988 pktstat = *((uint8_t *)m->m_data + framelen + 2); 989 990 if ((pktstat & RXSTAT_GOOD) == 0) { 991 if_statinc(ifp, if_ierrors); 992 993 if (pktstat & RXSTAT_OFLOW) 994 printf("%s: receive FIFO overflow\n", 995 device_xname(sc->sc_dev)); 996 997 bus_dmamap_sync(sc->sc_dmat, sc->sc_rxmap[i], 0, 998 sc->sc_rxmap[i]->dm_mapsize, BUS_DMASYNC_PREREAD); 999 SQ_INIT_RXDESC(sc, i); 1000 SQ_DPRINTF(("%s: sq_rxintr: buf %d no RXSTAT_GOOD\n", 1001 device_xname(sc->sc_dev), i)); 1002 continue; 1003 } 1004 1005 if (sq_add_rxbuf(sc, i) != 0) { 1006 if_statinc(ifp, if_ierrors); 1007 bus_dmamap_sync(sc->sc_dmat, sc->sc_rxmap[i], 0, 1008 sc->sc_rxmap[i]->dm_mapsize, BUS_DMASYNC_PREREAD); 1009 SQ_INIT_RXDESC(sc, i); 1010 SQ_DPRINTF(("%s: sq_rxintr: buf %d sq_add_rxbuf() " 1011 "failed\n", device_xname(sc->sc_dev), i)); 1012 continue; 1013 } 1014 1015 1016 m->m_data += 2; 1017 m_set_rcvif(m, ifp); 1018 m->m_pkthdr.len = m->m_len = framelen; 1019 1020 SQ_DPRINTF(("%s: sq_rxintr: buf %d len %d\n", 1021 device_xname(sc->sc_dev), i, framelen)); 1022 1023 if_percpuq_enqueue(ifp->if_percpuq, m); 1024 } 1025 1026 1027 /* If anything happened, move ring start/end pointers to new spot */ 1028 if (i != sc->sc_nextrx) { 1029 /* 1030 * NB: hpc3_hdd_ctl == hpc1_hdd_bufptr, and 1031 * HPC1_HDD_CTL_EOCHAIN == HPC3_HDD_CTL_EOCHAIN 1032 */ 1033 1034 new_end = SQ_PREVRX(i); 1035 sc->sc_rxdesc[new_end].hpc3_hdd_ctl |= HPC3_HDD_CTL_EOCHAIN; 1036 SQ_CDRXSYNC(sc, new_end, 1037 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 1038 1039 orig_end = SQ_PREVRX(sc->sc_nextrx); 1040 sc->sc_rxdesc[orig_end].hpc3_hdd_ctl &= ~HPC3_HDD_CTL_EOCHAIN; 1041 SQ_CDRXSYNC(sc, orig_end, 1042 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 1043 1044 sc->sc_nextrx = i; 1045 } 1046 1047 status = sq_hpc_read(sc, sc->hpc_regs->enetr_ctl); 1048 1049 /* If receive channel is stopped, restart it... */ 1050 if ((status & sc->hpc_regs->enetr_ctl_active) == 0) { 1051 /* Pass the start of the receive ring to the HPC */ 1052 sq_hpc_write(sc, sc->hpc_regs->enetr_ndbp, 1053 SQ_CDRXADDR(sc, sc->sc_nextrx)); 1054 1055 /* And turn on the HPC ethernet receive channel */ 1056 sq_hpc_write(sc, sc->hpc_regs->enetr_ctl, 1057 sc->hpc_regs->enetr_ctl_active); 1058 } 1059 1060 return count; 1061} 1062 1063static int 1064sq_txintr(struct sq_softc *sc) 1065{ 1066 int shift = 0; 1067 uint32_t status, tmp; 1068 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1069 1070 if (sc->hpc_regs->revision != 3) 1071 shift = 16; 1072 1073 status = sq_hpc_read(sc, sc->hpc_regs->enetx_ctl) >> shift; 1074 1075 SQ_TRACE(SQ_TXINTR_ENTER, sc, sc->sc_prevtx, status); 1076 1077 net_stats_ref_t nsr = IF_STAT_GETREF(ifp); 1078 tmp = (sc->hpc_regs->enetx_ctl_active >> shift) | TXSTAT_GOOD; 1079 if ((status & tmp) == 0) { 1080 if (status & TXSTAT_COLL) 1081 if_statinc_ref(nsr, if_collisions); 1082 1083 if (status & TXSTAT_UFLOW) { 1084 printf("%s: transmit underflow\n", 1085 device_xname(sc->sc_dev)); 1086 if_statinc_ref(nsr, if_oerrors); 1087 } 1088 1089 if (status & TXSTAT_16COLL) { 1090 printf("%s: max collisions reached\n", 1091 device_xname(sc->sc_dev)); 1092 if_statinc_ref(nsr, if_oerrors); 1093 if_statadd_ref(nsr, if_collisions, 16); 1094 } 1095 } 1096 IF_STAT_PUTREF(ifp); 1097 1098 /* prevtx now points to next xmit packet not yet finished */ 1099 if (sc->hpc_regs->revision == 3) 1100 sq_txring_hpc3(sc); 1101 else 1102 sq_txring_hpc1(sc); 1103 1104 /* If we have buffers free, let upper layers know */ 1105 if (sc->sc_nfreetx > 0) 1106 ifp->if_flags &= ~IFF_OACTIVE; 1107 1108 /* If all packets have left the coop, cancel watchdog */ 1109 if (sc->sc_nfreetx == SQ_NTXDESC) 1110 ifp->if_timer = 0; 1111 1112 SQ_TRACE(SQ_TXINTR_EXIT, sc, sc->sc_prevtx, status); 1113 if_schedule_deferred_start(ifp); 1114 1115 return 1; 1116} 1117 1118/* 1119 * Reclaim used transmit descriptors and restart the transmit DMA 1120 * engine if necessary. 1121 */ 1122static void 1123sq_txring_hpc1(struct sq_softc *sc) 1124{ 1125 /* 1126 * HPC1 doesn't tag transmitted descriptors, however, 1127 * the NDBP register points to the next descriptor that 1128 * has not yet been processed. If DMA is not in progress, 1129 * we can safely reclaim all descriptors up to NDBP, and, 1130 * if necessary, restart DMA at NDBP. Otherwise, if DMA 1131 * is active, we can only safely reclaim up to CBP. 1132 * 1133 * For now, we'll only reclaim on inactive DMA and assume 1134 * that a sufficiently large ring keeps us out of trouble. 1135 */ 1136 uint32_t reclaimto, status; 1137 int reclaimall, i = sc->sc_prevtx; 1138 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1139 1140 status = sq_hpc_read(sc, HPC1_ENETX_CTL); 1141 if (status & HPC1_ENETX_CTL_ACTIVE) { 1142 SQ_TRACE(SQ_TXINTR_BUSY, sc, i, status); 1143 return; 1144 } else 1145 reclaimto = sq_hpc_read(sc, HPC1_ENETX_NDBP); 1146 1147 if (sc->sc_nfreetx == 0 && SQ_CDTXADDR(sc, i) == reclaimto) 1148 reclaimall = 1; 1149 else 1150 reclaimall = 0; 1151 1152 while (sc->sc_nfreetx < SQ_NTXDESC) { 1153 if (SQ_CDTXADDR(sc, i) == reclaimto && !reclaimall) 1154 break; 1155 1156 SQ_CDTXSYNC(sc, i, sc->sc_txmap[i]->dm_nsegs, 1157 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 1158 1159 /* Sync the packet data, unload DMA map, free mbuf */ 1160 bus_dmamap_sync(sc->sc_dmat, sc->sc_txmap[i], 1161 0, sc->sc_txmap[i]->dm_mapsize, BUS_DMASYNC_POSTWRITE); 1162 bus_dmamap_unload(sc->sc_dmat, sc->sc_txmap[i]); 1163 m_freem(sc->sc_txmbuf[i]); 1164 sc->sc_txmbuf[i] = NULL; 1165 1166 if_statinc(ifp, if_opackets); 1167 sc->sc_nfreetx++; 1168 1169 SQ_TRACE(SQ_DONE_DMA, sc, i, status); 1170 1171 i = SQ_NEXTTX(i); 1172 } 1173 1174 if (sc->sc_nfreetx < SQ_NTXDESC) { 1175 SQ_TRACE(SQ_RESTART_DMA, sc, i, status); 1176 1177 KASSERT(reclaimto == SQ_CDTXADDR(sc, i)); 1178 1179 sq_hpc_write(sc, HPC1_ENETX_CFXBP, reclaimto); 1180 sq_hpc_write(sc, HPC1_ENETX_CBP, reclaimto); 1181 1182 /* Kick DMA channel into life */ 1183 sq_hpc_write(sc, HPC1_ENETX_CTL, HPC1_ENETX_CTL_ACTIVE); 1184 1185 /* 1186 * Set a watchdog timer in case the chip 1187 * flakes out. 1188 */ 1189 ifp->if_timer = 5; 1190 } 1191 1192 sc->sc_prevtx = i; 1193} 1194 1195/* 1196 * Reclaim used transmit descriptors and restart the transmit DMA 1197 * engine if necessary. 1198 */ 1199static void 1200sq_txring_hpc3(struct sq_softc *sc) 1201{ 1202 /* 1203 * HPC3 tags descriptors with a bit once they've been 1204 * transmitted. We need only free each XMITDONE'd 1205 * descriptor, and restart the DMA engine if any 1206 * descriptors are left over. 1207 */ 1208 int i; 1209 uint32_t status = 0; 1210 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1211 1212 i = sc->sc_prevtx; 1213 while (sc->sc_nfreetx < SQ_NTXDESC) { 1214 /* 1215 * Check status first so we don't end up with a case of 1216 * the buffer not being finished while the DMA channel 1217 * has gone idle. 1218 */ 1219 status = sq_hpc_read(sc, HPC3_ENETX_CTL); 1220 1221 SQ_CDTXSYNC(sc, i, sc->sc_txmap[i]->dm_nsegs, 1222 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 1223 1224 /* Check for used descriptor and restart DMA chain if needed */ 1225 if ((sc->sc_txdesc[i].hpc3_hdd_ctl & 1226 HPC3_HDD_CTL_XMITDONE) == 0) { 1227 if ((status & HPC3_ENETX_CTL_ACTIVE) == 0) { 1228 SQ_TRACE(SQ_RESTART_DMA, sc, i, status); 1229 1230 sq_hpc_write(sc, HPC3_ENETX_NDBP, 1231 SQ_CDTXADDR(sc, i)); 1232 1233 /* Kick DMA channel into life */ 1234 sq_hpc_write(sc, HPC3_ENETX_CTL, 1235 HPC3_ENETX_CTL_ACTIVE); 1236 1237 /* 1238 * Set a watchdog timer in case the chip 1239 * flakes out. 1240 */ 1241 ifp->if_timer = 5; 1242 } else 1243 SQ_TRACE(SQ_TXINTR_BUSY, sc, i, status); 1244 break; 1245 } 1246 1247 /* Sync the packet data, unload DMA map, free mbuf */ 1248 bus_dmamap_sync(sc->sc_dmat, sc->sc_txmap[i], 1249 0, sc->sc_txmap[i]->dm_mapsize, BUS_DMASYNC_POSTWRITE); 1250 bus_dmamap_unload(sc->sc_dmat, sc->sc_txmap[i]); 1251 m_freem(sc->sc_txmbuf[i]); 1252 sc->sc_txmbuf[i] = NULL; 1253 1254 if_statinc(ifp, if_opackets); 1255 sc->sc_nfreetx++; 1256 1257 SQ_TRACE(SQ_DONE_DMA, sc, i, status); 1258 i = SQ_NEXTTX(i); 1259 } 1260 1261 sc->sc_prevtx = i; 1262} 1263 1264void 1265sq_reset(struct sq_softc *sc) 1266{ 1267 1268 /* Stop HPC dma channels */ 1269 sq_hpc_write(sc, sc->hpc_regs->enetr_ctl, 0); 1270 sq_hpc_write(sc, sc->hpc_regs->enetx_ctl, 0); 1271 1272 sq_hpc_write(sc, sc->hpc_regs->enetr_reset, 3); 1273 delay(20); 1274 sq_hpc_write(sc, sc->hpc_regs->enetr_reset, 0); 1275} 1276 1277/* sq_add_rxbuf: Add a receive buffer to the indicated descriptor. */ 1278int 1279sq_add_rxbuf(struct sq_softc *sc, int idx) 1280{ 1281 int err; 1282 struct mbuf *m; 1283 1284 MGETHDR(m, M_DONTWAIT, MT_DATA); 1285 if (m == NULL) 1286 return ENOBUFS; 1287 1288 MCLGET(m, M_DONTWAIT); 1289 if ((m->m_flags & M_EXT) == 0) { 1290 m_freem(m); 1291 return ENOBUFS; 1292 } 1293 1294 if (sc->sc_rxmbuf[idx] != NULL) 1295 bus_dmamap_unload(sc->sc_dmat, sc->sc_rxmap[idx]); 1296 1297 sc->sc_rxmbuf[idx] = m; 1298 1299 if ((err = bus_dmamap_load(sc->sc_dmat, sc->sc_rxmap[idx], 1300 m->m_ext.ext_buf, m->m_ext.ext_size, NULL, BUS_DMA_NOWAIT)) != 0) { 1301 printf("%s: can't load rx DMA map %d, error = %d\n", 1302 device_xname(sc->sc_dev), idx, err); 1303 panic("sq_add_rxbuf"); /* XXX */ 1304 } 1305 1306 bus_dmamap_sync(sc->sc_dmat, sc->sc_rxmap[idx], 1307 0, sc->sc_rxmap[idx]->dm_mapsize, BUS_DMASYNC_PREREAD); 1308 1309 SQ_INIT_RXDESC(sc, idx); 1310 1311 return 0; 1312} 1313 1314void 1315sq_dump_buffer(paddr_t addr, psize_t len) 1316{ 1317 u_int i; 1318 uint8_t *physaddr = (uint8_t *)MIPS_PHYS_TO_KSEG1(addr); 1319 1320 if (len == 0) 1321 return; 1322 1323 printf("%p: ", physaddr); 1324 1325 for (i = 0; i < len; i++) { 1326 printf("%02x ", *(physaddr + i) & 0xff); 1327 if ((i % 16) == 15 && i != len - 1) 1328 printf("\n%p: ", physaddr + i); 1329 } 1330 1331 printf("\n"); 1332} 1333