hid.h revision 1.6
1/* $NetBSD: hid.h,v 1.6 2005/01/21 00:45:48 matt Exp $ */ 2 3/*- 4 * Copyright (c) 2000 Tsubai Masanari. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. The name of the author may not be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 26 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29#ifndef _POWERPC_OEA_HID_H_ 30#define _POWERPC_OEA_HID_H_ 31 32/* Hardware Implementation Dependent registers for the PowerPC */ 33 34#define HID0_EMCP 0x80000000 /* Enable MCP */ 35#define HID0_DBP 0x40000000 /* Disable 60x bus parity generation */ 36#define HID0_EBA 0x20000000 /* Enable 60x bus address parity checking */ 37#define HID0_EBD 0x10000000 /* Enable 60x bus data parity checking */ 38#define HID0_BCLK 0x08000000 /* CLK_OUT clock type selection */ 39#define HID0_EICE 0x04000000 /* Enable ICE output */ 40#define HID0_TBEN 0x04000000 /* Time base enable (7450) */ 41#define HID0_ECLK 0x02000000 /* CLK_OUT clock type selection */ 42#define HID0_PAR 0x01000000 /* Disable precharge of ARTRY */ 43#define HID0_STEN 0x01000000 /* Software table search enable (7450) */ 44#define HID0_DOZE 0x00800000 /* Enable doze mode */ 45#define HID0_HIGH_BAT_EN 0x00800000 /* Enable additional BATs (74[45][578]) */ 46#define HID0_NAP 0x00400000 /* Enable nap mode */ 47#define HID0_SLEEP 0x00200000 /* Enable sleep mode */ 48#define HID0_DPM 0x00100000 /* Enable Dynamic power management */ 49#define HID0_RISEG 0x00080000 /* Read I-SEG */ 50#define HID0_BHTCLR 0x00040000 /* Clear branch history table (7450) */ 51#define HID0_EIEC 0x00040000 /* Enable internal error checking */ 52#define HID0_XAEN 0x00020000 /* Enable eXtended Addressing (7450) */ 53#define HID0_NHR 0x00010000 /* Not hard reset */ 54#define HID0_ICE 0x00008000 /* Enable i-cache */ 55#define HID0_DCE 0x00004000 /* Enable d-cache */ 56#define HID0_ILOCK 0x00002000 /* i-cache lock */ 57#define HID0_DLOCK 0x00001000 /* d-cache lock */ 58#define HID0_ICFI 0x00000800 /* i-cache flush invalidate */ 59#define HID0_DCFI 0x00000400 /* d-cache flush invalidate */ 60#define HID0_SPD 0x00000200 /* Disable speculative cache access */ 61#define HID0_IFEM 0x00000100 /* Enable M-bit for I-fetch */ 62#define HID0_XBSEN 0x00000100 /* Extended BAT block size enable (7455+) */ 63#define HID0_SGE 0x00000080 /* Enable store gathering */ 64#define HID0_DCFA 0x00000040 /* Data cache flush assist */ 65#define HID0_BTIC 0x00000020 /* Enable BTIC */ 66#define HID0_LRSTK 0x00000010 /* Link register stack enable (7450) */ 67#define HID0_ABE 0x00000008 /* Enable address broadcast */ 68#define HID0_FOLD 0x00000008 /* Branch folding enable (7450) */ 69#define HID0_BHT 0x00000004 /* Enable branch history table */ 70#define HID0_NOPTI 0x00000001 /* No-op the dcbt(st) */ 71 72#define HID0_BITMASK "\020" \ 73 "\040EMCP\037DBP\036EBA\035EBD\034BCLK\033EICE\032ECLK\031PAR" \ 74 "\030DOZE\027NAP\026SLEEP\025DPM\024RISEG\023EIEC\022res\021NHR" \ 75 "\020ICE\017DCE\016ILOCK\015DLOCK\014ICFI\013DCFI\012SPD\011IFEM" \ 76 "\010SGE\007DCFA\006BTIC\005FBIOB\004ABE\003BHT\002NOPDST\001NOPTI" 77 78#define HID0_7450_BITMASK "\020" \ 79 "\040EMCP\037b1\036b2\035b3\034b4\033TBEN\032b6\031STEN" \ 80 "\030HIGH_BAT_EN\027NAP\026SLEEP\025DPM\024b12\023BHTCLR\022XAEN\021NHR" \ 81 "\020ICE\017DCE\016ILOCK\015DLOCK\014ICFI\013DCFI\012SPD\011XBSEN" \ 82 "\010SGE\007b25\006BTIC\005LRSTK\004FOLD\003BHT\002NOPDST\001NOPTI" 83 84/* 85 * HID0 bit definitions per CPU model 86 * 87 * bit 603 604 750 7400 7410 7450 88 * 0 EMCP EMCP EMCP EMCP EMCP - 89 * 1 - ECP DBP - - - 90 * 2 EBA EBA EBA EBA EDA - 91 * 3 EBD EBD EBD EBD EBD - 92 * 4 SBCLK - BCLK BCKL BCLK - 93 * 5 EICE - - - - TBEN 94 * 6 ECLK - ECLK ECLK ECLK - 95 * 7 PAR PAR PAR PAR PAR STEN 96 * 8 DOZE - DOZE DOZE DOZE HIGH_BAT_EN 97 * 9 NAP - NAP NAP NAP NAP 98 * 10 SLEEP - SLEEP SLEEP SLEEP SLEEP 99 * 11 DPM - DPM DPM DPM DPM 100 * 12 RISEG - - RISEG - - 101 * 13 - - - EIEC EIEC BHTCLR 102 * 14 - - - - - XAEN 103 * 15 - NHR NHR NHR NHR NHR 104 * 16 ICE ICE ICE ICE ICE ICE 105 * 17 DCE DCE DCE DCE DCE DCE 106 * 18 ILOCK ILOCK ILOCK ILOCK ILOCK ILOCK 107 * 19 DLOCK DLOCK DLOCK DLOCK DLOCK DLOCK 108 * 20 ICFI ICFI ICFI ICFI ICFI ICFI 109 * 21 DCFI DCFI DCFI DCFI DCFI DCFI 110 * 22 - - SPD SPD SPG SPD 111 * 23 - - IFEM IFTT IFTT XBSEN 112 * 24 - SIE SGE SGE SGE SGE 113 * 25 - - DCFA DCFA DCFA - 114 * 26 - - BTIC BTIC BTIC BTIC 115 * 27 FBIOB - - - - LRSTK 116 * 28 - - ABE - - FOLD 117 * 29 - BHT BHT BHT BHT BHT 118 * 30 - - - NOPDST NOPDST NOPDST 119 * 31 NOOPTI - NOOPTI NOPTI NOPTI NOPTI 120 * 121 * 604: ECP = Enable cache parity checking 122 * 604: SIE = Serial instruction execution disable 123 * 7450: TBEN = Time Base Enable 124 * 7450: STEN = Software table lookup enable 125 * 7450: BHTCLR = Branch history clear 126 * 7450: LRSTK = Link Register Stack Enable 127 * 7450: FOLD = Branch folding enable 128 */ 129 130#define HID1_EMCP 0x80000000 /* Machine Check Signal Enable */ 131#define HID1_EBA 0x20000000 /* Enable/Disable 60x/MPX Bus Address 132 Parity Checking */ 133#define HID1_EBD 0x10000000 /* Enable/Disable 60x/MPX Bus Data 134 Parity Checking */ 135#define HID1_BCLK 0x08000000 /* CLK_OUT */ 136#define HID1_ECLK 0x02000000 /* CLK_OUT */ 137#define HID1_PAR 0x01000000 /* Disable Precharge for ... */ 138#define HID1_DFS4 0x00800000 /* Dynamic Freq Switch / 4 (7448) */ 139#define HID1_DFS2 0x00400000 /* Dynamic Freq Switch / 2 (7447A) */ 140 141#endif /* _POWERPC_OEA_HID_H_ */ 142