if_emac.c revision 1.41
1/* $NetBSD: if_emac.c,v 1.41 2012/07/22 14:32:52 matt Exp $ */ 2 3/* 4 * Copyright 2001, 2002 Wasabi Systems, Inc. 5 * All rights reserved. 6 * 7 * Written by Simon Burge and Jason Thorpe for Wasabi Systems, Inc. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. All advertising materials mentioning features or use of this software 18 * must display the following acknowledgement: 19 * This product includes software developed for the NetBSD Project by 20 * Wasabi Systems, Inc. 21 * 4. The name of Wasabi Systems, Inc. may not be used to endorse 22 * or promote products derived from this software without specific prior 23 * written permission. 24 * 25 * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND 26 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 27 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC 29 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 30 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 31 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 32 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 33 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 34 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 35 * POSSIBILITY OF SUCH DAMAGE. 36 */ 37 38/* 39 * emac(4) supports following ibm4xx's EMACs. 40 * XXXX: ZMII and 'TCP Accelaration Hardware' not support yet... 41 * 42 * tested 43 * ------ 44 * 405EP - 10/100 x2 45 * 405EX/EXr o 10/100/1000 x2 (EXr x1), STA v2, 256bit hash-Table, RGMII 46 * 405GP/GPr o 10/100 47 * 440EP - 10/100 x2, ZMII 48 * 440GP - 10/100 x2, ZMII 49 * 440GX - 10/100/1000 x4, ZMII/RGMII(ch 2, 3), TAH(ch 2, 3) 50 * 440SP - 10/100/1000 51 * 440SPe - 10/100/1000, STA v2 52 */ 53 54#include <sys/cdefs.h> 55__KERNEL_RCSID(0, "$NetBSD: if_emac.c,v 1.41 2012/07/22 14:32:52 matt Exp $"); 56 57#include "opt_emac.h" 58 59#include <sys/param.h> 60#include <sys/systm.h> 61#include <sys/mbuf.h> 62#include <sys/kernel.h> 63#include <sys/socket.h> 64#include <sys/ioctl.h> 65#include <sys/cpu.h> 66#include <sys/device.h> 67 68#include <uvm/uvm_extern.h> /* for PAGE_SIZE */ 69 70#include <net/if.h> 71#include <net/if_dl.h> 72#include <net/if_media.h> 73#include <net/if_ether.h> 74 75#include <net/bpf.h> 76 77#include <powerpc/ibm4xx/cpu.h> 78#include <powerpc/ibm4xx/dcr4xx.h> 79#include <powerpc/ibm4xx/mal405gp.h> 80#include <powerpc/ibm4xx/dev/emacreg.h> 81#include <powerpc/ibm4xx/dev/if_emacreg.h> 82#include <powerpc/ibm4xx/dev/if_emacvar.h> 83#include <powerpc/ibm4xx/dev/malvar.h> 84#include <powerpc/ibm4xx/dev/opbreg.h> 85#include <powerpc/ibm4xx/dev/opbvar.h> 86#include <powerpc/ibm4xx/dev/plbvar.h> 87#if defined(EMAC_ZMII_PHY) || defined(EMAC_RGMII_PHY) 88#include <powerpc/ibm4xx/dev/rmiivar.h> 89#endif 90 91#include <dev/mii/miivar.h> 92 93#include "locators.h" 94 95 96/* 97 * Transmit descriptor list size. There are two Tx channels, each with 98 * up to 256 hardware descriptors available. We currently use one Tx 99 * channel. We tell the upper layers that they can queue a lot of 100 * packets, and we go ahead and manage up to 64 of them at a time. We 101 * allow up to 16 DMA segments per packet. 102 */ 103#define EMAC_NTXSEGS 16 104#define EMAC_TXQUEUELEN 64 105#define EMAC_TXQUEUELEN_MASK (EMAC_TXQUEUELEN - 1) 106#define EMAC_TXQUEUE_GC (EMAC_TXQUEUELEN / 4) 107#define EMAC_NTXDESC 256 108#define EMAC_NTXDESC_MASK (EMAC_NTXDESC - 1) 109#define EMAC_NEXTTX(x) (((x) + 1) & EMAC_NTXDESC_MASK) 110#define EMAC_NEXTTXS(x) (((x) + 1) & EMAC_TXQUEUELEN_MASK) 111 112/* 113 * Receive descriptor list size. There is one Rx channel with up to 256 114 * hardware descriptors available. We allocate 64 receive descriptors, 115 * each with a 2k buffer (MCLBYTES). 116 */ 117#define EMAC_NRXDESC 64 118#define EMAC_NRXDESC_MASK (EMAC_NRXDESC - 1) 119#define EMAC_NEXTRX(x) (((x) + 1) & EMAC_NRXDESC_MASK) 120#define EMAC_PREVRX(x) (((x) - 1) & EMAC_NRXDESC_MASK) 121 122/* 123 * Transmit/receive descriptors that are DMA'd to the EMAC. 124 */ 125struct emac_control_data { 126 struct mal_descriptor ecd_txdesc[EMAC_NTXDESC]; 127 struct mal_descriptor ecd_rxdesc[EMAC_NRXDESC]; 128}; 129 130#define EMAC_CDOFF(x) offsetof(struct emac_control_data, x) 131#define EMAC_CDTXOFF(x) EMAC_CDOFF(ecd_txdesc[(x)]) 132#define EMAC_CDRXOFF(x) EMAC_CDOFF(ecd_rxdesc[(x)]) 133 134/* 135 * Software state for transmit jobs. 136 */ 137struct emac_txsoft { 138 struct mbuf *txs_mbuf; /* head of mbuf chain */ 139 bus_dmamap_t txs_dmamap; /* our DMA map */ 140 int txs_firstdesc; /* first descriptor in packet */ 141 int txs_lastdesc; /* last descriptor in packet */ 142 int txs_ndesc; /* # of descriptors used */ 143}; 144 145/* 146 * Software state for receive descriptors. 147 */ 148struct emac_rxsoft { 149 struct mbuf *rxs_mbuf; /* head of mbuf chain */ 150 bus_dmamap_t rxs_dmamap; /* our DMA map */ 151}; 152 153/* 154 * Software state per device. 155 */ 156struct emac_softc { 157 device_t sc_dev; /* generic device information */ 158 int sc_instance; /* instance no. */ 159 bus_space_tag_t sc_st; /* bus space tag */ 160 bus_space_handle_t sc_sh; /* bus space handle */ 161 bus_dma_tag_t sc_dmat; /* bus DMA tag */ 162 struct ethercom sc_ethercom; /* ethernet common data */ 163 void *sc_sdhook; /* shutdown hook */ 164 void *sc_powerhook; /* power management hook */ 165 166 struct mii_data sc_mii; /* MII/media information */ 167 struct callout sc_callout; /* tick callout */ 168 169 uint32_t sc_mr1; /* copy of Mode Register 1 */ 170 uint32_t sc_stacr_read; /* Read opcode of STAOPC of STACR */ 171 uint32_t sc_stacr_write; /* Write opcode of STAOPC of STACR */ 172 uint32_t sc_stacr_bits; /* misc bits of STACR */ 173 bool sc_stacr_completed; /* Operation completed of STACR */ 174 int sc_htsize; /* Hash Table size */ 175 176 bus_dmamap_t sc_cddmamap; /* control data dma map */ 177#define sc_cddma sc_cddmamap->dm_segs[0].ds_addr 178 179 /* Software state for transmit/receive descriptors. */ 180 struct emac_txsoft sc_txsoft[EMAC_TXQUEUELEN]; 181 struct emac_rxsoft sc_rxsoft[EMAC_NRXDESC]; 182 183 /* Control data structures. */ 184 struct emac_control_data *sc_control_data; 185#define sc_txdescs sc_control_data->ecd_txdesc 186#define sc_rxdescs sc_control_data->ecd_rxdesc 187 188#ifdef EMAC_EVENT_COUNTERS 189 struct evcnt sc_ev_rxintr; /* Rx interrupts */ 190 struct evcnt sc_ev_txintr; /* Tx interrupts */ 191 struct evcnt sc_ev_rxde; /* Rx descriptor interrupts */ 192 struct evcnt sc_ev_txde; /* Tx descriptor interrupts */ 193 struct evcnt sc_ev_intr; /* General EMAC interrupts */ 194 195 struct evcnt sc_ev_txreap; /* Calls to Tx descriptor reaper */ 196 struct evcnt sc_ev_txsstall; /* Tx stalled due to no txs */ 197 struct evcnt sc_ev_txdstall; /* Tx stalled due to no txd */ 198 struct evcnt sc_ev_txdrop; /* Tx packets dropped (too many segs) */ 199 struct evcnt sc_ev_tu; /* Tx underrun */ 200#endif /* EMAC_EVENT_COUNTERS */ 201 202 int sc_txfree; /* number of free Tx descriptors */ 203 int sc_txnext; /* next ready Tx descriptor */ 204 205 int sc_txsfree; /* number of free Tx jobs */ 206 int sc_txsnext; /* next ready Tx job */ 207 int sc_txsdirty; /* dirty Tx jobs */ 208 209 int sc_rxptr; /* next ready RX descriptor/descsoft */ 210 211 void (*sc_rmii_enable)(device_t, int); /* reduced MII enable */ 212 void (*sc_rmii_disable)(device_t, int); /* reduced MII disable*/ 213 void (*sc_rmii_speed)(device_t, int, int); /* reduced MII speed */ 214}; 215 216#ifdef EMAC_EVENT_COUNTERS 217#define EMAC_EVCNT_INCR(ev) (ev)->ev_count++ 218#else 219#define EMAC_EVCNT_INCR(ev) /* nothing */ 220#endif 221 222#define EMAC_CDTXADDR(sc, x) ((sc)->sc_cddma + EMAC_CDTXOFF((x))) 223#define EMAC_CDRXADDR(sc, x) ((sc)->sc_cddma + EMAC_CDRXOFF((x))) 224 225#define EMAC_CDTXSYNC(sc, x, n, ops) \ 226do { \ 227 int __x, __n; \ 228 \ 229 __x = (x); \ 230 __n = (n); \ 231 \ 232 /* If it will wrap around, sync to the end of the ring. */ \ 233 if ((__x + __n) > EMAC_NTXDESC) { \ 234 bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \ 235 EMAC_CDTXOFF(__x), sizeof(struct mal_descriptor) * \ 236 (EMAC_NTXDESC - __x), (ops)); \ 237 __n -= (EMAC_NTXDESC - __x); \ 238 __x = 0; \ 239 } \ 240 \ 241 /* Now sync whatever is left. */ \ 242 bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \ 243 EMAC_CDTXOFF(__x), sizeof(struct mal_descriptor) * __n, (ops)); \ 244} while (/*CONSTCOND*/0) 245 246#define EMAC_CDRXSYNC(sc, x, ops) \ 247do { \ 248 bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \ 249 EMAC_CDRXOFF((x)), sizeof(struct mal_descriptor), (ops)); \ 250} while (/*CONSTCOND*/0) 251 252#define EMAC_INIT_RXDESC(sc, x) \ 253do { \ 254 struct emac_rxsoft *__rxs = &(sc)->sc_rxsoft[(x)]; \ 255 struct mal_descriptor *__rxd = &(sc)->sc_rxdescs[(x)]; \ 256 struct mbuf *__m = __rxs->rxs_mbuf; \ 257 \ 258 /* \ 259 * Note: We scoot the packet forward 2 bytes in the buffer \ 260 * so that the payload after the Ethernet header is aligned \ 261 * to a 4-byte boundary. \ 262 */ \ 263 __m->m_data = __m->m_ext.ext_buf + 2; \ 264 \ 265 __rxd->md_data = __rxs->rxs_dmamap->dm_segs[0].ds_addr + 2; \ 266 __rxd->md_data_len = __m->m_ext.ext_size - 2; \ 267 __rxd->md_stat_ctrl = MAL_RX_EMPTY | MAL_RX_INTERRUPT | \ 268 /* Set wrap on last descriptor. */ \ 269 (((x) == EMAC_NRXDESC - 1) ? MAL_RX_WRAP : 0); \ 270 EMAC_CDRXSYNC((sc), (x), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); \ 271} while (/*CONSTCOND*/0) 272 273#define EMAC_WRITE(sc, reg, val) \ 274 bus_space_write_stream_4((sc)->sc_st, (sc)->sc_sh, (reg), (val)) 275#define EMAC_READ(sc, reg) \ 276 bus_space_read_stream_4((sc)->sc_st, (sc)->sc_sh, (reg)) 277 278#define EMAC_SET_FILTER(aht, crc) \ 279do { \ 280 (aht)[3 - (((crc) >> 26) >> 4)] |= 1 << (((crc) >> 26) & 0xf); \ 281} while (/*CONSTCOND*/0) 282#define EMAC_SET_FILTER256(aht, crc) \ 283do { \ 284 (aht)[7 - (((crc) >> 24) >> 5)] |= 1 << (((crc) >> 24) & 0x1f); \ 285} while (/*CONSTCOND*/0) 286 287static int emac_match(device_t, cfdata_t, void *); 288static void emac_attach(device_t, device_t, void *); 289 290static int emac_intr(void *); 291static void emac_shutdown(void *); 292 293static void emac_start(struct ifnet *); 294static int emac_ioctl(struct ifnet *, u_long, void *); 295static int emac_init(struct ifnet *); 296static void emac_stop(struct ifnet *, int); 297static void emac_watchdog(struct ifnet *); 298 299static int emac_add_rxbuf(struct emac_softc *, int); 300static void emac_rxdrain(struct emac_softc *); 301static int emac_set_filter(struct emac_softc *); 302static int emac_txreap(struct emac_softc *); 303 304static void emac_soft_reset(struct emac_softc *); 305static void emac_smart_reset(struct emac_softc *); 306 307static int emac_mii_readreg(device_t, int, int); 308static void emac_mii_writereg(device_t, int, int, int); 309static void emac_mii_statchg(struct ifnet *); 310static uint32_t emac_mii_wait(struct emac_softc *); 311static void emac_mii_tick(void *); 312 313int emac_copy_small = 0; 314 315CFATTACH_DECL_NEW(emac, sizeof(struct emac_softc), 316 emac_match, emac_attach, NULL, NULL); 317 318 319static int 320emac_match(device_t parent, cfdata_t cf, void *aux) 321{ 322 struct opb_attach_args *oaa = aux; 323 324 /* match only on-chip ethernet devices */ 325 if (strcmp(oaa->opb_name, cf->cf_name) == 0) 326 return 1; 327 328 return 0; 329} 330 331static void 332emac_attach(device_t parent, device_t self, void *aux) 333{ 334 struct opb_attach_args *oaa = aux; 335 struct emac_softc *sc = device_private(self); 336 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 337 struct mii_data *mii = &sc->sc_mii; 338 const char * xname = device_xname(self); 339 bus_dma_segment_t seg; 340 int error, i, nseg, opb_freq, opbc, mii_phy = MII_PHY_ANY; 341 const uint8_t *enaddr; 342 prop_dictionary_t dict = device_properties(self); 343 prop_data_t ea; 344 345 bus_space_map(oaa->opb_bt, oaa->opb_addr, EMAC_NREG, 0, &sc->sc_sh); 346 347 sc->sc_dev = self; 348 sc->sc_instance = oaa->opb_instance; 349 sc->sc_st = oaa->opb_bt; 350 sc->sc_dmat = oaa->opb_dmat; 351 352 callout_init(&sc->sc_callout, 0); 353 354 aprint_naive("\n"); 355 aprint_normal(": Ethernet Media Access Controller\n"); 356 357 /* Fetch the Ethernet address. */ 358 ea = prop_dictionary_get(dict, "mac-address"); 359 if (ea == NULL) { 360 aprint_error_dev(self, "unable to get mac-address property\n"); 361 return; 362 } 363 KASSERT(prop_object_type(ea) == PROP_TYPE_DATA); 364 KASSERT(prop_data_size(ea) == ETHER_ADDR_LEN); 365 enaddr = prop_data_data_nocopy(ea); 366 aprint_normal_dev(self, "Ethernet address %s\n", ether_sprintf(enaddr)); 367 368#if defined(EMAC_ZMII_PHY) || defined(EMAC_RGMII_PHY) 369 /* Fetch the MII offset. */ 370 prop_dictionary_get_uint32(dict, "mii-phy", &mii_phy); 371 372#ifdef EMAC_ZMII_PHY 373 if (oaa->opb_flags & OPB_FLAGS_EMAC_RMII_ZMII) 374 zmii_attach(parent, sc->sc_instance, &sc->sc_rmii_enable, 375 &sc->sc_rmii_disable, &sc->sc_rmii_speed); 376#endif 377#ifdef EMAC_RGMII_PHY 378 if (oaa->opb_flags & OPB_FLAGS_EMAC_RMII_RGMII) 379 rgmii_attach(parent, sc->sc_instance, &sc->sc_rmii_enable, 380 &sc->sc_rmii_disable, &sc->sc_rmii_speed); 381#endif 382#endif 383 384 /* 385 * Allocate the control data structures, and create and load the 386 * DMA map for it. 387 */ 388 if ((error = bus_dmamem_alloc(sc->sc_dmat, 389 sizeof(struct emac_control_data), 0, 0, &seg, 1, &nseg, 0)) != 0) { 390 aprint_error_dev(self, 391 "unable to allocate control data, error = %d\n", error); 392 goto fail_0; 393 } 394 395 if ((error = bus_dmamem_map(sc->sc_dmat, &seg, nseg, 396 sizeof(struct emac_control_data), (void **)&sc->sc_control_data, 397 BUS_DMA_COHERENT)) != 0) { 398 aprint_error_dev(self, 399 "unable to map control data, error = %d\n", error); 400 goto fail_1; 401 } 402 403 if ((error = bus_dmamap_create(sc->sc_dmat, 404 sizeof(struct emac_control_data), 1, 405 sizeof(struct emac_control_data), 0, 0, &sc->sc_cddmamap)) != 0) { 406 aprint_error_dev(self, 407 "unable to create control data DMA map, error = %d\n", 408 error); 409 goto fail_2; 410 } 411 412 if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_cddmamap, 413 sc->sc_control_data, sizeof(struct emac_control_data), NULL, 414 0)) != 0) { 415 aprint_error_dev(self, 416 "unable to load control data DMA map, error = %d\n", error); 417 goto fail_3; 418 } 419 420 /* 421 * Create the transmit buffer DMA maps. 422 */ 423 for (i = 0; i < EMAC_TXQUEUELEN; i++) { 424 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 425 EMAC_NTXSEGS, MCLBYTES, 0, 0, 426 &sc->sc_txsoft[i].txs_dmamap)) != 0) { 427 aprint_error_dev(self, 428 "unable to create tx DMA map %d, error = %d\n", 429 i, error); 430 goto fail_4; 431 } 432 } 433 434 /* 435 * Create the receive buffer DMA maps. 436 */ 437 for (i = 0; i < EMAC_NRXDESC; i++) { 438 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, 439 MCLBYTES, 0, 0, &sc->sc_rxsoft[i].rxs_dmamap)) != 0) { 440 aprint_error_dev(self, 441 "unable to create rx DMA map %d, error = %d\n", 442 i, error); 443 goto fail_5; 444 } 445 sc->sc_rxsoft[i].rxs_mbuf = NULL; 446 } 447 448 /* Soft Reset the EMAC. The chip to a known state. */ 449 emac_soft_reset(sc); 450 451 opb_freq = opb_get_frequency(); 452 switch (opb_freq) { 453 case 50000000: opbc = STACR_OPBC_50MHZ; break; 454 case 66666666: opbc = STACR_OPBC_66MHZ; break; 455 case 83333333: opbc = STACR_OPBC_83MHZ; break; 456 case 100000000: opbc = STACR_OPBC_100MHZ; break; 457 458 default: 459 if (opb_freq > 100000000) { 460 opbc = STACR_OPBC_A100MHZ; 461 break; 462 } 463 aprint_error_dev(self, "unsupport OPB frequency %dMHz\n", 464 opb_freq / 1000 / 1000); 465 goto fail_5; 466 } 467 if (oaa->opb_flags & OPB_FLAGS_EMAC_GBE) { 468 sc->sc_mr1 = 469 MR1_RFS_GBE(MR1__FS_16KB) | 470 MR1_TFS_GBE(MR1__FS_16KB) | 471 MR1_TR0_MULTIPLE | 472 MR1_OBCI(opbc); 473 sc->sc_ethercom.ec_capabilities |= ETHERCAP_JUMBO_MTU; 474 475 if (oaa->opb_flags & OPB_FLAGS_EMAC_STACV2) { 476 sc->sc_stacr_read = STACR_STAOPC_READ; 477 sc->sc_stacr_write = STACR_STAOPC_WRITE; 478 sc->sc_stacr_bits = STACR_OC; 479 sc->sc_stacr_completed = false; 480 } else { 481 sc->sc_stacr_read = STACR_READ; 482 sc->sc_stacr_write = STACR_WRITE; 483 sc->sc_stacr_completed = true; 484 } 485 } else { 486 /* 487 * Set up Mode Register 1 - set receive and transmit FIFOs to 488 * maximum size, allow transmit of multiple packets (only 489 * channel 0 is used). 490 * 491 * XXX: Allow pause packets?? 492 */ 493 sc->sc_mr1 = 494 MR1_RFS(MR1__FS_4KB) | 495 MR1_TFS(MR1__FS_2KB) | 496 MR1_TR0_MULTIPLE; 497 498 sc->sc_stacr_read = STACR_READ; 499 sc->sc_stacr_write = STACR_WRITE; 500 sc->sc_stacr_bits = STACR_OPBC(opbc); 501 sc->sc_stacr_completed = true; 502 } 503 504 intr_establish(oaa->opb_irq, IST_LEVEL, IPL_NET, emac_intr, sc); 505 mal_intr_establish(sc->sc_instance, sc); 506 507 if (oaa->opb_flags & OPB_FLAGS_EMAC_HT256) 508 sc->sc_htsize = 256; 509 else 510 sc->sc_htsize = 64; 511 512 /* Clear all interrupts */ 513 EMAC_WRITE(sc, EMAC_ISR, ISR_ALL); 514 515 /* 516 * Initialise the media structures. 517 */ 518 mii->mii_ifp = ifp; 519 mii->mii_readreg = emac_mii_readreg; 520 mii->mii_writereg = emac_mii_writereg; 521 mii->mii_statchg = emac_mii_statchg; 522 523 sc->sc_ethercom.ec_mii = mii; 524 ifmedia_init(&mii->mii_media, 0, ether_mediachange, ether_mediastatus); 525 mii_attach(self, mii, 0xffffffff, mii_phy, MII_OFFSET_ANY, 0); 526 if (LIST_FIRST(&mii->mii_phys) == NULL) { 527 ifmedia_add(&mii->mii_media, IFM_ETHER|IFM_NONE, 0, NULL); 528 ifmedia_set(&mii->mii_media, IFM_ETHER|IFM_NONE); 529 } else 530 ifmedia_set(&mii->mii_media, IFM_ETHER|IFM_AUTO); 531 532 ifp = &sc->sc_ethercom.ec_if; 533 strcpy(ifp->if_xname, xname); 534 ifp->if_softc = sc; 535 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 536 ifp->if_start = emac_start; 537 ifp->if_ioctl = emac_ioctl; 538 ifp->if_init = emac_init; 539 ifp->if_stop = emac_stop; 540 ifp->if_watchdog = emac_watchdog; 541 IFQ_SET_READY(&ifp->if_snd); 542 543 /* 544 * We can support 802.1Q VLAN-sized frames. 545 */ 546 sc->sc_ethercom.ec_capabilities |= ETHERCAP_VLAN_MTU; 547 548 /* 549 * Attach the interface. 550 */ 551 if_attach(ifp); 552 ether_ifattach(ifp, enaddr); 553 554#ifdef EMAC_EVENT_COUNTERS 555 /* 556 * Attach the event counters. 557 */ 558 evcnt_attach_dynamic(&sc->sc_ev_txintr, EVCNT_TYPE_INTR, 559 NULL, xname, "txintr"); 560 evcnt_attach_dynamic(&sc->sc_ev_rxintr, EVCNT_TYPE_INTR, 561 NULL, xname, "rxintr"); 562 evcnt_attach_dynamic(&sc->sc_ev_txde, EVCNT_TYPE_INTR, 563 NULL, xname, "txde"); 564 evcnt_attach_dynamic(&sc->sc_ev_rxde, EVCNT_TYPE_INTR, 565 NULL, xname, "rxde"); 566 evcnt_attach_dynamic(&sc->sc_ev_intr, EVCNT_TYPE_INTR, 567 NULL, xname, "intr"); 568 569 evcnt_attach_dynamic(&sc->sc_ev_txreap, EVCNT_TYPE_MISC, 570 NULL, xname, "txreap"); 571 evcnt_attach_dynamic(&sc->sc_ev_txsstall, EVCNT_TYPE_MISC, 572 NULL, xname, "txsstall"); 573 evcnt_attach_dynamic(&sc->sc_ev_txdstall, EVCNT_TYPE_MISC, 574 NULL, xname, "txdstall"); 575 evcnt_attach_dynamic(&sc->sc_ev_txdrop, EVCNT_TYPE_MISC, 576 NULL, xname, "txdrop"); 577 evcnt_attach_dynamic(&sc->sc_ev_tu, EVCNT_TYPE_MISC, 578 NULL, xname, "tu"); 579#endif /* EMAC_EVENT_COUNTERS */ 580 581 /* 582 * Make sure the interface is shutdown during reboot. 583 */ 584 sc->sc_sdhook = shutdownhook_establish(emac_shutdown, sc); 585 if (sc->sc_sdhook == NULL) 586 aprint_error_dev(self, 587 "WARNING: unable to establish shutdown hook\n"); 588 589 return; 590 591 /* 592 * Free any resources we've allocated during the failed attach 593 * attempt. Do this in reverse order and fall through. 594 */ 595fail_5: 596 for (i = 0; i < EMAC_NRXDESC; i++) { 597 if (sc->sc_rxsoft[i].rxs_dmamap != NULL) 598 bus_dmamap_destroy(sc->sc_dmat, 599 sc->sc_rxsoft[i].rxs_dmamap); 600 } 601fail_4: 602 for (i = 0; i < EMAC_TXQUEUELEN; i++) { 603 if (sc->sc_txsoft[i].txs_dmamap != NULL) 604 bus_dmamap_destroy(sc->sc_dmat, 605 sc->sc_txsoft[i].txs_dmamap); 606 } 607 bus_dmamap_unload(sc->sc_dmat, sc->sc_cddmamap); 608fail_3: 609 bus_dmamap_destroy(sc->sc_dmat, sc->sc_cddmamap); 610fail_2: 611 bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_control_data, 612 sizeof(struct emac_control_data)); 613fail_1: 614 bus_dmamem_free(sc->sc_dmat, &seg, nseg); 615fail_0: 616 return; 617} 618 619/* 620 * EMAC General interrupt handler 621 */ 622static int 623emac_intr(void *arg) 624{ 625 struct emac_softc *sc = arg; 626 uint32_t status; 627 628 EMAC_EVCNT_INCR(&sc->sc_ev_intr); 629 status = EMAC_READ(sc, EMAC_ISR); 630 631 /* Clear the interrupt status bits. */ 632 EMAC_WRITE(sc, EMAC_ISR, status); 633 634 return 1; 635} 636 637static void 638emac_shutdown(void *arg) 639{ 640 struct emac_softc *sc = arg; 641 642 emac_stop(&sc->sc_ethercom.ec_if, 0); 643} 644 645 646/* 647 * ifnet interface functions 648 */ 649 650static void 651emac_start(struct ifnet *ifp) 652{ 653 struct emac_softc *sc = ifp->if_softc; 654 struct mbuf *m0; 655 struct emac_txsoft *txs; 656 bus_dmamap_t dmamap; 657 int error, firsttx, nexttx, lasttx, ofree, seg; 658 659 lasttx = 0; /* XXX gcc */ 660 661 if ((ifp->if_flags & (IFF_RUNNING|IFF_OACTIVE)) != IFF_RUNNING) 662 return; 663 664 /* 665 * Remember the previous number of free descriptors. 666 */ 667 ofree = sc->sc_txfree; 668 669 /* 670 * Loop through the send queue, setting up transmit descriptors 671 * until we drain the queue, or use up all available transmit 672 * descriptors. 673 */ 674 for (;;) { 675 /* Grab a packet off the queue. */ 676 IFQ_POLL(&ifp->if_snd, m0); 677 if (m0 == NULL) 678 break; 679 680 /* 681 * Get a work queue entry. Reclaim used Tx descriptors if 682 * we are running low. 683 */ 684 if (sc->sc_txsfree < EMAC_TXQUEUE_GC) { 685 emac_txreap(sc); 686 if (sc->sc_txsfree == 0) { 687 EMAC_EVCNT_INCR(&sc->sc_ev_txsstall); 688 break; 689 } 690 } 691 692 txs = &sc->sc_txsoft[sc->sc_txsnext]; 693 dmamap = txs->txs_dmamap; 694 695 /* 696 * Load the DMA map. If this fails, the packet either 697 * didn't fit in the alloted number of segments, or we 698 * were short on resources. In this case, we'll copy 699 * and try again. 700 */ 701 error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m0, 702 BUS_DMA_WRITE|BUS_DMA_NOWAIT); 703 if (error) { 704 if (error == EFBIG) { 705 EMAC_EVCNT_INCR(&sc->sc_ev_txdrop); 706 aprint_error_ifnet(ifp, 707 "Tx packet consumes too many " 708 "DMA segments, dropping...\n"); 709 IFQ_DEQUEUE(&ifp->if_snd, m0); 710 m_freem(m0); 711 continue; 712 } 713 /* Short on resources, just stop for now. */ 714 break; 715 } 716 717 /* 718 * Ensure we have enough descriptors free to describe 719 * the packet. 720 */ 721 if (dmamap->dm_nsegs > sc->sc_txfree) { 722 /* 723 * Not enough free descriptors to transmit this 724 * packet. We haven't committed anything yet, 725 * so just unload the DMA map, put the packet 726 * back on the queue, and punt. Notify the upper 727 * layer that there are not more slots left. 728 * 729 */ 730 ifp->if_flags |= IFF_OACTIVE; 731 bus_dmamap_unload(sc->sc_dmat, dmamap); 732 EMAC_EVCNT_INCR(&sc->sc_ev_txdstall); 733 break; 734 } 735 736 IFQ_DEQUEUE(&ifp->if_snd, m0); 737 738 /* 739 * WE ARE NOW COMMITTED TO TRANSMITTING THE PACKET. 740 */ 741 742 /* Sync the DMA map. */ 743 bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize, 744 BUS_DMASYNC_PREWRITE); 745 746 /* 747 * Store a pointer to the packet so that we can free it 748 * later. 749 */ 750 txs->txs_mbuf = m0; 751 txs->txs_firstdesc = sc->sc_txnext; 752 txs->txs_ndesc = dmamap->dm_nsegs; 753 754 /* 755 * Initialize the transmit descriptor. 756 */ 757 firsttx = sc->sc_txnext; 758 for (nexttx = sc->sc_txnext, seg = 0; 759 seg < dmamap->dm_nsegs; 760 seg++, nexttx = EMAC_NEXTTX(nexttx)) { 761 struct mal_descriptor *txdesc = 762 &sc->sc_txdescs[nexttx]; 763 764 /* 765 * If this is the first descriptor we're 766 * enqueueing, don't set the TX_READY bit just 767 * yet. That could cause a race condition. 768 * We'll do it below. 769 */ 770 txdesc->md_data = dmamap->dm_segs[seg].ds_addr; 771 txdesc->md_data_len = dmamap->dm_segs[seg].ds_len; 772 txdesc->md_stat_ctrl = 773 (txdesc->md_stat_ctrl & MAL_TX_WRAP) | 774 (nexttx == firsttx ? 0 : MAL_TX_READY) | 775 EMAC_TXC_GFCS | EMAC_TXC_GPAD; 776 lasttx = nexttx; 777 } 778 779 /* Set the LAST bit on the last segment. */ 780 sc->sc_txdescs[lasttx].md_stat_ctrl |= MAL_TX_LAST; 781 782 /* 783 * Set up last segment descriptor to send an interrupt after 784 * that descriptor is transmitted, and bypass existing Tx 785 * descriptor reaping method (for now...). 786 */ 787 sc->sc_txdescs[lasttx].md_stat_ctrl |= MAL_TX_INTERRUPT; 788 789 790 txs->txs_lastdesc = lasttx; 791 792 /* Sync the descriptors we're using. */ 793 EMAC_CDTXSYNC(sc, sc->sc_txnext, dmamap->dm_nsegs, 794 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 795 796 /* 797 * The entire packet chain is set up. Give the 798 * first descriptor to the chip now. 799 */ 800 sc->sc_txdescs[firsttx].md_stat_ctrl |= MAL_TX_READY; 801 EMAC_CDTXSYNC(sc, firsttx, 1, 802 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 803 /* 804 * Tell the EMAC that a new packet is available. 805 */ 806 EMAC_WRITE(sc, EMAC_TMR0, TMR0_GNP0 | TMR0_TFAE_2); 807 808 /* Advance the tx pointer. */ 809 sc->sc_txfree -= txs->txs_ndesc; 810 sc->sc_txnext = nexttx; 811 812 sc->sc_txsfree--; 813 sc->sc_txsnext = EMAC_NEXTTXS(sc->sc_txsnext); 814 815 /* 816 * Pass the packet to any BPF listeners. 817 */ 818 bpf_mtap(ifp, m0); 819 } 820 821 if (sc->sc_txfree == 0) 822 /* No more slots left; notify upper layer. */ 823 ifp->if_flags |= IFF_OACTIVE; 824 825 if (sc->sc_txfree != ofree) 826 /* Set a watchdog timer in case the chip flakes out. */ 827 ifp->if_timer = 5; 828} 829 830static int 831emac_ioctl(struct ifnet *ifp, u_long cmd, void *data) 832{ 833 struct emac_softc *sc = ifp->if_softc; 834 int s, error; 835 836 s = splnet(); 837 838 switch (cmd) { 839 case SIOCSIFMTU: 840 { 841 struct ifreq *ifr = (struct ifreq *)data; 842 int maxmtu; 843 844 if (sc->sc_ethercom.ec_capabilities & ETHERCAP_JUMBO_MTU) 845 maxmtu = EMAC_MAX_MTU; 846 else 847 maxmtu = ETHERMTU; 848 849 if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > maxmtu) 850 error = EINVAL; 851 else if ((error = ifioctl_common(ifp, cmd, data)) != ENETRESET) 852 break; 853 else if (ifp->if_flags & IFF_UP) 854 error = emac_init(ifp); 855 else 856 error = 0; 857 break; 858 } 859 860 default: 861 error = ether_ioctl(ifp, cmd, data); 862 if (error == ENETRESET) { 863 /* 864 * Multicast list has changed; set the hardware filter 865 * accordingly. 866 */ 867 if (ifp->if_flags & IFF_RUNNING) 868 error = emac_set_filter(sc); 869 else 870 error = 0; 871 } 872 } 873 874 /* try to get more packets going */ 875 emac_start(ifp); 876 877 splx(s); 878 return error; 879} 880 881static int 882emac_init(struct ifnet *ifp) 883{ 884 struct emac_softc *sc = ifp->if_softc; 885 struct emac_rxsoft *rxs; 886 const uint8_t *enaddr = CLLADDR(ifp->if_sadl); 887 int error, i; 888 889 error = 0; 890 891 /* Cancel any pending I/O. */ 892 emac_stop(ifp, 0); 893 894 /* Reset the chip to a known state. */ 895 emac_soft_reset(sc); 896 897 /* 898 * Initialise the transmit descriptor ring. 899 */ 900 memset(sc->sc_txdescs, 0, sizeof(sc->sc_txdescs)); 901 /* set wrap on last descriptor */ 902 sc->sc_txdescs[EMAC_NTXDESC - 1].md_stat_ctrl |= MAL_TX_WRAP; 903 EMAC_CDTXSYNC(sc, 0, EMAC_NTXDESC, 904 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 905 sc->sc_txfree = EMAC_NTXDESC; 906 sc->sc_txnext = 0; 907 908 /* 909 * Initialise the transmit job descriptors. 910 */ 911 for (i = 0; i < EMAC_TXQUEUELEN; i++) 912 sc->sc_txsoft[i].txs_mbuf = NULL; 913 sc->sc_txsfree = EMAC_TXQUEUELEN; 914 sc->sc_txsnext = 0; 915 sc->sc_txsdirty = 0; 916 917 /* 918 * Initialise the receiver descriptor and receive job 919 * descriptor rings. 920 */ 921 for (i = 0; i < EMAC_NRXDESC; i++) { 922 rxs = &sc->sc_rxsoft[i]; 923 if (rxs->rxs_mbuf == NULL) { 924 if ((error = emac_add_rxbuf(sc, i)) != 0) { 925 aprint_error_ifnet(ifp, 926 "unable to allocate or map rx buffer %d," 927 " error = %d\n", 928 i, error); 929 /* 930 * XXX Should attempt to run with fewer receive 931 * XXX buffers instead of just failing. 932 */ 933 emac_rxdrain(sc); 934 goto out; 935 } 936 } else 937 EMAC_INIT_RXDESC(sc, i); 938 } 939 sc->sc_rxptr = 0; 940 941 /* 942 * Set the current media. 943 */ 944 if ((error = ether_mediachange(ifp)) != 0) 945 goto out; 946 947 /* 948 * Load the MAC address. 949 */ 950 EMAC_WRITE(sc, EMAC_IAHR, enaddr[0] << 8 | enaddr[1]); 951 EMAC_WRITE(sc, EMAC_IALR, 952 enaddr[2] << 24 | enaddr[3] << 16 | enaddr[4] << 8 | enaddr[5]); 953 954 /* Enable the transmit and receive channel on the MAL. */ 955 error = mal_start(sc->sc_instance, 956 EMAC_CDTXADDR(sc, 0), EMAC_CDRXADDR(sc, 0)); 957 if (error) 958 goto out; 959 960 sc->sc_mr1 &= ~MR1_JPSM; 961 if (ifp->if_mtu > ETHERMTU) 962 /* Enable Jumbo Packet Support Mode */ 963 sc->sc_mr1 |= MR1_JPSM; 964 965 /* Set fifos, media modes. */ 966 EMAC_WRITE(sc, EMAC_MR1, sc->sc_mr1); 967 968 /* 969 * Enable Individual and (possibly) Broadcast Address modes, 970 * runt packets, and strip padding. 971 */ 972 EMAC_WRITE(sc, EMAC_RMR, RMR_IAE | RMR_RRP | RMR_SP | RMR_TFAE_2 | 973 (ifp->if_flags & IFF_PROMISC ? RMR_PME : 0) | 974 (ifp->if_flags & IFF_BROADCAST ? RMR_BAE : 0)); 975 976 /* 977 * Set multicast filter. 978 */ 979 emac_set_filter(sc); 980 981 /* 982 * Set low- and urgent-priority request thresholds. 983 */ 984 EMAC_WRITE(sc, EMAC_TMR1, 985 ((7 << TMR1_TLR_SHIFT) & TMR1_TLR_MASK) | /* 16 word burst */ 986 ((15 << TMR1_TUR_SHIFT) & TMR1_TUR_MASK)); 987 /* 988 * Set Transmit Request Threshold Register. 989 */ 990 EMAC_WRITE(sc, EMAC_TRTR, TRTR_256); 991 992 /* 993 * Set high and low receive watermarks. 994 */ 995 EMAC_WRITE(sc, EMAC_RWMR, 996 30 << RWMR_RLWM_SHIFT | 64 << RWMR_RLWM_SHIFT); 997 998 /* 999 * Set frame gap. 1000 */ 1001 EMAC_WRITE(sc, EMAC_IPGVR, 8); 1002 1003 /* 1004 * Set interrupt status enable bits for EMAC. 1005 */ 1006 EMAC_WRITE(sc, EMAC_ISER, 1007 ISR_TXPE | /* TX Parity Error */ 1008 ISR_RXPE | /* RX Parity Error */ 1009 ISR_TXUE | /* TX Underrun Event */ 1010 ISR_RXOE | /* RX Overrun Event */ 1011 ISR_OVR | /* Overrun Error */ 1012 ISR_PP | /* Pause Packet */ 1013 ISR_BP | /* Bad Packet */ 1014 ISR_RP | /* Runt Packet */ 1015 ISR_SE | /* Short Event */ 1016 ISR_ALE | /* Alignment Error */ 1017 ISR_BFCS | /* Bad FCS */ 1018 ISR_PTLE | /* Packet Too Long Error */ 1019 ISR_ORE | /* Out of Range Error */ 1020 ISR_IRE | /* In Range Error */ 1021 ISR_SE0 | /* Signal Quality Error 0 (SQE) */ 1022 ISR_TE0 | /* Transmit Error 0 */ 1023 ISR_MOS | /* MMA Operation Succeeded */ 1024 ISR_MOF); /* MMA Operation Failed */ 1025 1026 /* 1027 * Enable the transmit and receive channel on the EMAC. 1028 */ 1029 EMAC_WRITE(sc, EMAC_MR0, MR0_TXE | MR0_RXE); 1030 1031 /* 1032 * Start the one second MII clock. 1033 */ 1034 callout_reset(&sc->sc_callout, hz, emac_mii_tick, sc); 1035 1036 /* 1037 * ... all done! 1038 */ 1039 ifp->if_flags |= IFF_RUNNING; 1040 ifp->if_flags &= ~IFF_OACTIVE; 1041 1042 out: 1043 if (error) { 1044 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 1045 ifp->if_timer = 0; 1046 aprint_error_ifnet(ifp, "interface not running\n"); 1047 } 1048 return error; 1049} 1050 1051static void 1052emac_stop(struct ifnet *ifp, int disable) 1053{ 1054 struct emac_softc *sc = ifp->if_softc; 1055 struct emac_txsoft *txs; 1056 int i; 1057 1058 /* Stop the one second clock. */ 1059 callout_stop(&sc->sc_callout); 1060 1061 /* Down the MII */ 1062 mii_down(&sc->sc_mii); 1063 1064 /* Disable interrupts. */ 1065 EMAC_WRITE(sc, EMAC_ISER, 0); 1066 1067 /* Disable the receive and transmit channels. */ 1068 mal_stop(sc->sc_instance); 1069 1070 /* Disable the transmit enable and receive MACs. */ 1071 EMAC_WRITE(sc, EMAC_MR0, 1072 EMAC_READ(sc, EMAC_MR0) & ~(MR0_TXE | MR0_RXE)); 1073 1074 /* Release any queued transmit buffers. */ 1075 for (i = 0; i < EMAC_TXQUEUELEN; i++) { 1076 txs = &sc->sc_txsoft[i]; 1077 if (txs->txs_mbuf != NULL) { 1078 bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap); 1079 m_freem(txs->txs_mbuf); 1080 txs->txs_mbuf = NULL; 1081 } 1082 } 1083 1084 if (disable) 1085 emac_rxdrain(sc); 1086 1087 /* 1088 * Mark the interface down and cancel the watchdog timer. 1089 */ 1090 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 1091 ifp->if_timer = 0; 1092} 1093 1094static void 1095emac_watchdog(struct ifnet *ifp) 1096{ 1097 struct emac_softc *sc = ifp->if_softc; 1098 1099 /* 1100 * Since we're not interrupting every packet, sweep 1101 * up before we report an error. 1102 */ 1103 emac_txreap(sc); 1104 1105 if (sc->sc_txfree != EMAC_NTXDESC) { 1106 aprint_error_ifnet(ifp, 1107 "device timeout (txfree %d txsfree %d txnext %d)\n", 1108 sc->sc_txfree, sc->sc_txsfree, sc->sc_txnext); 1109 ifp->if_oerrors++; 1110 1111 /* Reset the interface. */ 1112 (void)emac_init(ifp); 1113 } else if (ifp->if_flags & IFF_DEBUG) 1114 aprint_error_ifnet(ifp, "recovered from device timeout\n"); 1115 1116 /* try to get more packets going */ 1117 emac_start(ifp); 1118} 1119 1120static int 1121emac_add_rxbuf(struct emac_softc *sc, int idx) 1122{ 1123 struct emac_rxsoft *rxs = &sc->sc_rxsoft[idx]; 1124 struct mbuf *m; 1125 int error; 1126 1127 MGETHDR(m, M_DONTWAIT, MT_DATA); 1128 if (m == NULL) 1129 return ENOBUFS; 1130 1131 MCLGET(m, M_DONTWAIT); 1132 if ((m->m_flags & M_EXT) == 0) { 1133 m_freem(m); 1134 return ENOBUFS; 1135 } 1136 1137 if (rxs->rxs_mbuf != NULL) 1138 bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap); 1139 1140 rxs->rxs_mbuf = m; 1141 1142 error = bus_dmamap_load(sc->sc_dmat, rxs->rxs_dmamap, 1143 m->m_ext.ext_buf, m->m_ext.ext_size, NULL, BUS_DMA_NOWAIT); 1144 if (error) { 1145 aprint_error_dev(sc->sc_dev, 1146 "can't load rx DMA map %d, error = %d\n", idx, error); 1147 panic("emac_add_rxbuf"); /* XXX */ 1148 } 1149 1150 bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, 1151 rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD); 1152 1153 EMAC_INIT_RXDESC(sc, idx); 1154 1155 return 0; 1156} 1157 1158static void 1159emac_rxdrain(struct emac_softc *sc) 1160{ 1161 struct emac_rxsoft *rxs; 1162 int i; 1163 1164 for (i = 0; i < EMAC_NRXDESC; i++) { 1165 rxs = &sc->sc_rxsoft[i]; 1166 if (rxs->rxs_mbuf != NULL) { 1167 bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap); 1168 m_freem(rxs->rxs_mbuf); 1169 rxs->rxs_mbuf = NULL; 1170 } 1171 } 1172} 1173 1174static int 1175emac_set_filter(struct emac_softc *sc) 1176{ 1177 struct ether_multistep step; 1178 struct ether_multi *enm; 1179 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1180 uint32_t rmr, crc, mask, tmp, reg, gaht[8] = { 0, 0, 0, 0, 0, 0, 0, 0 }; 1181 int regs, cnt = 0, i; 1182 1183 if (sc->sc_htsize == 256) { 1184 reg = EMAC_GAHT256(0); 1185 regs = 8; 1186 } else { 1187 reg = EMAC_GAHT64(0); 1188 regs = 4; 1189 } 1190 mask = (1ULL << (sc->sc_htsize / regs)) - 1; 1191 1192 rmr = EMAC_READ(sc, EMAC_RMR); 1193 rmr &= ~(RMR_PMME | RMR_MAE); 1194 ifp->if_flags &= ~IFF_ALLMULTI; 1195 1196 ETHER_FIRST_MULTI(step, &sc->sc_ethercom, enm); 1197 while (enm != NULL) { 1198 if (memcmp(enm->enm_addrlo, 1199 enm->enm_addrhi, ETHER_ADDR_LEN) != 0) { 1200 /* 1201 * We must listen to a range of multicast addresses. 1202 * For now, just accept all multicasts, rather than 1203 * trying to set only those filter bits needed to match 1204 * the range. (At this time, the only use of address 1205 * ranges is for IP multicast routing, for which the 1206 * range is big enough to require all bits set.) 1207 */ 1208 gaht[0] = gaht[1] = gaht[2] = gaht[3] = 1209 gaht[4] = gaht[5] = gaht[6] = gaht[7] = mask; 1210 break; 1211 } 1212 1213 crc = ether_crc32_be(enm->enm_addrlo, ETHER_ADDR_LEN); 1214 1215 if (sc->sc_htsize == 256) 1216 EMAC_SET_FILTER256(gaht, crc); 1217 else 1218 EMAC_SET_FILTER(gaht, crc); 1219 1220 ETHER_NEXT_MULTI(step, enm); 1221 cnt++; 1222 } 1223 1224 for (i = 1, tmp = gaht[0]; i < regs; i++) 1225 tmp &= gaht[i]; 1226 if (tmp == mask) { 1227 /* All categories are true. */ 1228 ifp->if_flags |= IFF_ALLMULTI; 1229 rmr |= RMR_PMME; 1230 } else if (cnt != 0) { 1231 /* Some categories are true. */ 1232 for (i = 0; i < regs; i++) 1233 EMAC_WRITE(sc, reg + (i << 2), gaht[i]); 1234 rmr |= RMR_MAE; 1235 } 1236 EMAC_WRITE(sc, EMAC_RMR, rmr); 1237 1238 return 0; 1239} 1240 1241/* 1242 * Reap completed Tx descriptors. 1243 */ 1244static int 1245emac_txreap(struct emac_softc *sc) 1246{ 1247 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1248 struct emac_txsoft *txs; 1249 int handled, i; 1250 uint32_t txstat; 1251 1252 EMAC_EVCNT_INCR(&sc->sc_ev_txreap); 1253 handled = 0; 1254 1255 ifp->if_flags &= ~IFF_OACTIVE; 1256 1257 /* 1258 * Go through our Tx list and free mbufs for those 1259 * frames that have been transmitted. 1260 */ 1261 for (i = sc->sc_txsdirty; sc->sc_txsfree != EMAC_TXQUEUELEN; 1262 i = EMAC_NEXTTXS(i), sc->sc_txsfree++) { 1263 txs = &sc->sc_txsoft[i]; 1264 1265 EMAC_CDTXSYNC(sc, txs->txs_lastdesc, 1266 txs->txs_dmamap->dm_nsegs, 1267 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 1268 1269 txstat = sc->sc_txdescs[txs->txs_lastdesc].md_stat_ctrl; 1270 if (txstat & MAL_TX_READY) 1271 break; 1272 1273 handled = 1; 1274 1275 /* 1276 * Check for errors and collisions. 1277 */ 1278 if (txstat & (EMAC_TXS_UR | EMAC_TXS_ED)) 1279 ifp->if_oerrors++; 1280 1281#ifdef EMAC_EVENT_COUNTERS 1282 if (txstat & EMAC_TXS_UR) 1283 EMAC_EVCNT_INCR(&sc->sc_ev_tu); 1284#endif /* EMAC_EVENT_COUNTERS */ 1285 1286 if (txstat & 1287 (EMAC_TXS_EC | EMAC_TXS_MC | EMAC_TXS_SC | EMAC_TXS_LC)) { 1288 if (txstat & EMAC_TXS_EC) 1289 ifp->if_collisions += 16; 1290 else if (txstat & EMAC_TXS_MC) 1291 ifp->if_collisions += 2; /* XXX? */ 1292 else if (txstat & EMAC_TXS_SC) 1293 ifp->if_collisions++; 1294 if (txstat & EMAC_TXS_LC) 1295 ifp->if_collisions++; 1296 } else 1297 ifp->if_opackets++; 1298 1299 if (ifp->if_flags & IFF_DEBUG) { 1300 if (txstat & EMAC_TXS_ED) 1301 aprint_error_ifnet(ifp, "excessive deferral\n"); 1302 if (txstat & EMAC_TXS_EC) 1303 aprint_error_ifnet(ifp, 1304 "excessive collisions\n"); 1305 } 1306 1307 sc->sc_txfree += txs->txs_ndesc; 1308 bus_dmamap_sync(sc->sc_dmat, txs->txs_dmamap, 1309 0, txs->txs_dmamap->dm_mapsize, BUS_DMASYNC_POSTWRITE); 1310 bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap); 1311 m_freem(txs->txs_mbuf); 1312 txs->txs_mbuf = NULL; 1313 } 1314 1315 /* Update the dirty transmit buffer pointer. */ 1316 sc->sc_txsdirty = i; 1317 1318 /* 1319 * If there are no more pending transmissions, cancel the watchdog 1320 * timer. 1321 */ 1322 if (sc->sc_txsfree == EMAC_TXQUEUELEN) 1323 ifp->if_timer = 0; 1324 1325 return handled; 1326} 1327 1328 1329/* 1330 * Reset functions 1331 */ 1332 1333static void 1334emac_soft_reset(struct emac_softc *sc) 1335{ 1336 uint32_t sdr; 1337 int t = 0; 1338 1339 /* 1340 * The PHY must provide a TX Clk in order perform a soft reset the 1341 * EMAC. If none is present, select the internal clock, 1342 * SDR0_MFR[E0CS,E1CS]. After the soft reset, select the external 1343 * clock. 1344 */ 1345 1346 sdr = mfsdr(DCR_SDR0_MFR); 1347 sdr |= SDR0_MFR_ECS(sc->sc_instance); 1348 mtsdr(DCR_SDR0_MFR, sdr); 1349 1350 EMAC_WRITE(sc, EMAC_MR0, MR0_SRST); 1351 1352 sdr = mfsdr(DCR_SDR0_MFR); 1353 sdr &= ~SDR0_MFR_ECS(sc->sc_instance); 1354 mtsdr(DCR_SDR0_MFR, sdr); 1355 1356 delay(5); 1357 1358 /* wait finish */ 1359 while (EMAC_READ(sc, EMAC_MR0) & MR0_SRST) { 1360 if (++t == 1000000 /* 1sec XXXXX */) { 1361 aprint_error_dev(sc->sc_dev, "Soft Reset failed\n"); 1362 return; 1363 } 1364 delay(1); 1365 } 1366} 1367 1368static void 1369emac_smart_reset(struct emac_softc *sc) 1370{ 1371 uint32_t mr0; 1372 int t = 0; 1373 1374 mr0 = EMAC_READ(sc, EMAC_MR0); 1375 if (mr0 & (MR0_TXE | MR0_RXE)) { 1376 mr0 &= ~(MR0_TXE | MR0_RXE); 1377 EMAC_WRITE(sc, EMAC_MR0, mr0); 1378 1379 /* wait idel state */ 1380 while ((EMAC_READ(sc, EMAC_MR0) & (MR0_TXI | MR0_RXI)) != 1381 (MR0_TXI | MR0_RXI)) { 1382 if (++t == 1000000 /* 1sec XXXXX */) { 1383 aprint_error_dev(sc->sc_dev, 1384 "Smart Reset failed\n"); 1385 return; 1386 } 1387 delay(1); 1388 } 1389 } 1390} 1391 1392 1393/* 1394 * MII related functions 1395 */ 1396 1397static int 1398emac_mii_readreg(device_t self, int phy, int reg) 1399{ 1400 struct emac_softc *sc = device_private(self); 1401 uint32_t sta_reg; 1402 1403 if (sc->sc_rmii_enable) 1404 sc->sc_rmii_enable(device_parent(self), sc->sc_instance); 1405 1406 /* wait for PHY data transfer to complete */ 1407 if (emac_mii_wait(sc)) 1408 goto fail; 1409 1410 sta_reg = 1411 sc->sc_stacr_read | 1412 (reg << STACR_PRA_SHIFT) | 1413 (phy << STACR_PCDA_SHIFT) | 1414 sc->sc_stacr_bits; 1415 EMAC_WRITE(sc, EMAC_STACR, sta_reg); 1416 1417 if (emac_mii_wait(sc)) 1418 goto fail; 1419 sta_reg = EMAC_READ(sc, EMAC_STACR); 1420 1421 if (sc->sc_rmii_disable) 1422 sc->sc_rmii_disable(device_parent(self), sc->sc_instance); 1423 1424 if (sta_reg & STACR_PHYE) 1425 return 0; 1426 return sta_reg >> STACR_PHYD_SHIFT; 1427 1428fail: 1429 if (sc->sc_rmii_disable) 1430 sc->sc_rmii_disable(device_parent(self), sc->sc_instance); 1431 return 0; 1432} 1433 1434static void 1435emac_mii_writereg(device_t self, int phy, int reg, int val) 1436{ 1437 struct emac_softc *sc = device_private(self); 1438 uint32_t sta_reg; 1439 1440 if (sc->sc_rmii_enable) 1441 sc->sc_rmii_enable(device_parent(self), sc->sc_instance); 1442 1443 /* wait for PHY data transfer to complete */ 1444 if (emac_mii_wait(sc)) 1445 goto out; 1446 1447 sta_reg = 1448 (val << STACR_PHYD_SHIFT) | 1449 sc->sc_stacr_write | 1450 (reg << STACR_PRA_SHIFT) | 1451 (phy << STACR_PCDA_SHIFT) | 1452 sc->sc_stacr_bits; 1453 EMAC_WRITE(sc, EMAC_STACR, sta_reg); 1454 1455 if (emac_mii_wait(sc)) 1456 goto out; 1457 if (EMAC_READ(sc, EMAC_STACR) & STACR_PHYE) 1458 aprint_error_dev(sc->sc_dev, "MII PHY Error\n"); 1459 1460out: 1461 if (sc->sc_rmii_disable) 1462 sc->sc_rmii_disable(device_parent(self), sc->sc_instance); 1463} 1464 1465static void 1466emac_mii_statchg(struct ifnet *ifp) 1467{ 1468 struct emac_softc *sc = ifp->if_softc; 1469 struct mii_data *mii = &sc->sc_mii; 1470 1471 /* 1472 * MR1 can only be written immediately after a reset... 1473 */ 1474 emac_smart_reset(sc); 1475 1476 sc->sc_mr1 &= ~(MR1_FDE | MR1_ILE | MR1_EIFC | MR1_MF_MASK | MR1_IST); 1477 if (mii->mii_media_active & IFM_FDX) 1478 sc->sc_mr1 |= (MR1_FDE | MR1_EIFC | MR1_IST); 1479 if (mii->mii_media_active & IFM_FLOW) 1480 sc->sc_mr1 |= MR1_EIFC; 1481 if (mii->mii_media_active & IFM_LOOP) 1482 sc->sc_mr1 |= MR1_ILE; 1483 switch (IFM_SUBTYPE(mii->mii_media_active)) { 1484 case IFM_1000_T: 1485 sc->sc_mr1 |= (MR1_MF_1000MBS | MR1_IST); 1486 break; 1487 1488 case IFM_100_TX: 1489 sc->sc_mr1 |= (MR1_MF_100MBS | MR1_IST); 1490 break; 1491 1492 case IFM_10_T: 1493 sc->sc_mr1 |= MR1_MF_10MBS; 1494 break; 1495 1496 case IFM_NONE: 1497 break; 1498 1499 default: 1500 aprint_error_dev(sc->sc_dev, "unknown sub-type %d\n", 1501 IFM_SUBTYPE(mii->mii_media_active)); 1502 break; 1503 } 1504 if (sc->sc_rmii_speed) 1505 sc->sc_rmii_speed(device_parent(sc->sc_dev), sc->sc_instance, 1506 IFM_SUBTYPE(mii->mii_media_active)); 1507 1508 EMAC_WRITE(sc, EMAC_MR1, sc->sc_mr1); 1509 1510 /* Enable TX and RX if already RUNNING */ 1511 if (ifp->if_flags & IFF_RUNNING) 1512 EMAC_WRITE(sc, EMAC_MR0, MR0_TXE | MR0_RXE); 1513} 1514 1515static uint32_t 1516emac_mii_wait(struct emac_softc *sc) 1517{ 1518 int i; 1519 uint32_t oc; 1520 1521 /* wait for PHY data transfer to complete */ 1522 i = 0; 1523 oc = EMAC_READ(sc, EMAC_STACR) & STACR_OC; 1524 while ((oc == STACR_OC) != sc->sc_stacr_completed) { 1525 delay(7); 1526 if (i++ > 5) { 1527 aprint_error_dev(sc->sc_dev, "MII timed out\n"); 1528 return -1; 1529 } 1530 oc = EMAC_READ(sc, EMAC_STACR) & STACR_OC; 1531 } 1532 return 0; 1533} 1534 1535static void 1536emac_mii_tick(void *arg) 1537{ 1538 struct emac_softc *sc = arg; 1539 int s; 1540 1541 if (!device_is_active(sc->sc_dev)) 1542 return; 1543 1544 s = splnet(); 1545 mii_tick(&sc->sc_mii); 1546 splx(s); 1547 1548 callout_reset(&sc->sc_callout, hz, emac_mii_tick, sc); 1549} 1550 1551int 1552emac_txeob_intr(void *arg) 1553{ 1554 struct emac_softc *sc = arg; 1555 int handled = 0; 1556 1557 EMAC_EVCNT_INCR(&sc->sc_ev_txintr); 1558 handled |= emac_txreap(sc); 1559 1560 /* try to get more packets going */ 1561 emac_start(&sc->sc_ethercom.ec_if); 1562 1563 return handled; 1564} 1565 1566int 1567emac_rxeob_intr(void *arg) 1568{ 1569 struct emac_softc *sc = arg; 1570 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1571 struct emac_rxsoft *rxs; 1572 struct mbuf *m; 1573 uint32_t rxstat; 1574 int i, len; 1575 1576 EMAC_EVCNT_INCR(&sc->sc_ev_rxintr); 1577 1578 for (i = sc->sc_rxptr; ; i = EMAC_NEXTRX(i)) { 1579 rxs = &sc->sc_rxsoft[i]; 1580 1581 EMAC_CDRXSYNC(sc, i, 1582 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 1583 1584 rxstat = sc->sc_rxdescs[i].md_stat_ctrl; 1585 1586 if (rxstat & MAL_RX_EMPTY) { 1587 /* 1588 * We have processed all of the receive buffers. 1589 */ 1590 /* Flush current empty descriptor */ 1591 EMAC_CDRXSYNC(sc, i, 1592 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1593 break; 1594 } 1595 1596 /* 1597 * If an error occurred, update stats, clear the status 1598 * word, and leave the packet buffer in place. It will 1599 * simply be reused the next time the ring comes around. 1600 */ 1601 if (rxstat & (EMAC_RXS_OE | EMAC_RXS_BP | EMAC_RXS_SE | 1602 EMAC_RXS_AE | EMAC_RXS_BFCS | EMAC_RXS_PTL | EMAC_RXS_ORE | 1603 EMAC_RXS_IRE)) { 1604#define PRINTERR(bit, str) \ 1605 if (rxstat & (bit)) \ 1606 aprint_error_ifnet(ifp, \ 1607 "receive error: %s\n", str) 1608 ifp->if_ierrors++; 1609 PRINTERR(EMAC_RXS_OE, "overrun error"); 1610 PRINTERR(EMAC_RXS_BP, "bad packet"); 1611 PRINTERR(EMAC_RXS_RP, "runt packet"); 1612 PRINTERR(EMAC_RXS_SE, "short event"); 1613 PRINTERR(EMAC_RXS_AE, "alignment error"); 1614 PRINTERR(EMAC_RXS_BFCS, "bad FCS"); 1615 PRINTERR(EMAC_RXS_PTL, "packet too long"); 1616 PRINTERR(EMAC_RXS_ORE, "out of range error"); 1617 PRINTERR(EMAC_RXS_IRE, "in range error"); 1618#undef PRINTERR 1619 EMAC_INIT_RXDESC(sc, i); 1620 continue; 1621 } 1622 1623 bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, 1624 rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_POSTREAD); 1625 1626 /* 1627 * No errors; receive the packet. Note, the 405GP emac 1628 * includes the CRC with every packet. 1629 */ 1630 len = sc->sc_rxdescs[i].md_data_len - ETHER_CRC_LEN; 1631 1632 /* 1633 * If the packet is small enough to fit in a 1634 * single header mbuf, allocate one and copy 1635 * the data into it. This greatly reduces 1636 * memory consumption when we receive lots 1637 * of small packets. 1638 * 1639 * Otherwise, we add a new buffer to the receive 1640 * chain. If this fails, we drop the packet and 1641 * recycle the old buffer. 1642 */ 1643 if (emac_copy_small != 0 && len <= MHLEN) { 1644 MGETHDR(m, M_DONTWAIT, MT_DATA); 1645 if (m == NULL) 1646 goto dropit; 1647 memcpy(mtod(m, void *), 1648 mtod(rxs->rxs_mbuf, void *), len); 1649 EMAC_INIT_RXDESC(sc, i); 1650 bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, 1651 rxs->rxs_dmamap->dm_mapsize, 1652 BUS_DMASYNC_PREREAD); 1653 } else { 1654 m = rxs->rxs_mbuf; 1655 if (emac_add_rxbuf(sc, i) != 0) { 1656 dropit: 1657 ifp->if_ierrors++; 1658 EMAC_INIT_RXDESC(sc, i); 1659 bus_dmamap_sync(sc->sc_dmat, 1660 rxs->rxs_dmamap, 0, 1661 rxs->rxs_dmamap->dm_mapsize, 1662 BUS_DMASYNC_PREREAD); 1663 continue; 1664 } 1665 } 1666 1667 ifp->if_ipackets++; 1668 m->m_pkthdr.rcvif = ifp; 1669 m->m_pkthdr.len = m->m_len = len; 1670 1671 /* 1672 * Pass this up to any BPF listeners, but only 1673 * pass if up the stack if it's for us. 1674 */ 1675 bpf_mtap(ifp, m); 1676 1677 /* Pass it on. */ 1678 (*ifp->if_input)(ifp, m); 1679 } 1680 1681 /* Update the receive pointer. */ 1682 sc->sc_rxptr = i; 1683 1684 return 1; 1685} 1686 1687int 1688emac_txde_intr(void *arg) 1689{ 1690 struct emac_softc *sc = arg; 1691 1692 EMAC_EVCNT_INCR(&sc->sc_ev_txde); 1693 aprint_error_dev(sc->sc_dev, "emac_txde_intr\n"); 1694 return 1; 1695} 1696 1697int 1698emac_rxde_intr(void *arg) 1699{ 1700 struct emac_softc *sc = arg; 1701 int i; 1702 1703 EMAC_EVCNT_INCR(&sc->sc_ev_rxde); 1704 aprint_error_dev(sc->sc_dev, "emac_rxde_intr\n"); 1705 /* 1706 * XXX! 1707 * This is a bit drastic; we just drop all descriptors that aren't 1708 * "clean". We should probably send any that are up the stack. 1709 */ 1710 for (i = 0; i < EMAC_NRXDESC; i++) { 1711 EMAC_CDRXSYNC(sc, i, 1712 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 1713 1714 if (sc->sc_rxdescs[i].md_data_len != MCLBYTES) 1715 EMAC_INIT_RXDESC(sc, i); 1716 } 1717 1718 return 1; 1719} 1720