GENERIC revision 1.91
1# $NetBSD: GENERIC,v 1.91 2008/01/19 13:11:18 chris Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21include "arch/netwinder/conf/std.netwinder" 22 23options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25# estimated number of users 26 27maxusers 32 28 29# Standard system options 30 31options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT 32#options NTP # NTP phase/frequency locked loop 33 34# Enable experimental buffer queue strategy for better responsiveness under 35# high disk I/O load. Use it with caution - it's not proven to be stable yet. 36#options BUFQ_READPRIO 37#options BUFQ_PRIOCSCAN 38 39# CPU options 40 41# For StrongARM systems 42options CPU_SA110 # Support the SA110 core 43makeoptions CPUFLAGS="-march=armv4 -mtune=strongarm" 44 45# FPA options 46 47#options ARMFPE # ARM Ltd FPE 48 49# Default console is wscons, if igsfb(4) and pckbc(4) are configured, 50# or com(4) otherwise. You can force a serial console with these options 51#options CONSDEVNAME="\"com\"",CONCOMADDR=0x3f8,CONSPEED=115200 52 53 54# File systems 55 56file-system FFS # UFS 57#file-system LFS # log-structured file system 58file-system MFS # memory file system 59file-system NFS # Network file system 60#file-system ADOSFS # AmigaDOS-compatible file system 61file-system EXT2FS # second extended file system (linux) 62#file-system CD9660 # ISO 9660 + Rock Ridge file system 63file-system MSDOSFS # MS-DOS file system 64file-system FDESC # /dev/fd 65file-system KERNFS # /kern 66file-system NULLFS # loopback file system 67#file-system PORTAL # portal filesystem (still experimental) 68file-system PROCFS # /proc 69#file-system UMAPFS # NULLFS + uid and gid remapping 70#file-system UNION # union file system 71file-system PTYFS # /dev/pts/N support 72#file-system TMPFS # Efficient memory file-system 73#file-system UDF # experimental - OSTA UDF CD/DVD file-system 74 75# File system options 76#options QUOTA # UFS quotas 77#options FFS_EI # FFS Endian Independant support 78#options FFS_NO_SNAPSHOT # No FFS snapshot support 79options NFSSERVER 80options SOFTDEP 81#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 82 83# Networking options 84 85#options GATEWAY # packet forwarding 86options INET # IP + ICMP + TCP + UDP 87options INET6 # IPV6 88#options IPSEC # IP security 89#options IPSEC_ESP # IP security (encryption part; define w/ IPSEC) 90#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 91#options IPSEC_DEBUG # debug for IP security 92#options MROUTING # IP multicast routing 93#options PIM # Protocol Independent Multicast 94#options ISO,TPIP # OSI 95#options EON # OSI tunneling over IP 96#options NETATALK # AppleTalk networking 97#options PFIL_HOOKS # pfil(9) packet filter hooks 98#options PPP_BSDCOMP # BSD-Compress compression support for PPP 99#options PPP_DEFLATE # Deflate compression support for PPP 100#options PPP_FILTER # Active filter support for PPP (requires bpf) 101#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 102 103#options ALTQ # Manipulate network interfaces' output queues 104#options ALTQ_BLUE # Stochastic Fair Blue 105#options ALTQ_CBQ # Class-Based Queueing 106#options ALTQ_CDNR # Diffserv Traffic Conditioner 107#options ALTQ_FIFOQ # First-In First-Out Queue 108#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 109#options ALTQ_HFSC # Hierarchical Fair Service Curve 110#options ALTQ_LOCALQ # Local queueing discipline 111#options ALTQ_PRIQ # Priority Queueing 112#options ALTQ_RED # Random Early Detection 113#options ALTQ_RIO # RED with IN/OUT 114#options ALTQ_WFQ # Weighted Fair Queueing 115 116options NFS_BOOT_BOOTP 117options NFS_BOOT_DHCP 118#options NFS_BOOT_BOOTPARAM 119 120# Compatibility options 121 122#options COMPAT_43 # 4.3BSD compatibility. 123options COMPAT_40 # NetBSD 4.0 compatibility. 124options COMPAT_30 # NetBSD 3.0 compatibility. 125options COMPAT_20 # NetBSD 2.0 compatibility. 126options COMPAT_16 # NetBSD 1.6 compatibility. 127options COMPAT_15 # NetBSD 1.5 compatibility. 128options COMPAT_14 # NetBSD 1.4 compatibility. 129#options COMPAT_13 # NetBSD 1.3 compatibility. 130#options COMPAT_12 # NetBSD 1.2 compatibility. 131#options COMPAT_11 # NetBSD 1.1 compatibility. 132#options COMPAT_10 # NetBSD 1.0 compatibility. 133#options COMPAT_09 # NetBSD 0.9 compatibility. 134#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 135 136options COMPAT_LINUX # binary compatibility with Linux 137options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 138 139# Shared memory options 140 141options SYSVMSG # System V-like message queues 142options SYSVSEM # System V-like semaphores 143options SYSVSHM # System V-like memory sharing 144options SHMMAXPGS=1024 # 1024 pages is the default 145options P1003_1B_SEMAPHORE # p1003.1b semaphore support 146 147# Device options 148 149#options MEMORY_DISK_HOOKS # boottime setup of ramdisk 150#options MEMORY_DISK_ROOT_SIZE=3400 # Size in blocks 151#options MEMORY_DISK_IS_ROOT # use memory disk as root 152 153# Miscellaneous kernel options 154options KTRACE # system call tracing, a la ktrace(1) 155options IRQSTATS # manage IRQ statistics 156#options LKM # loadable kernel modules 157#options KMEMSTATS # kernel memory statistics 158#options SCSIVERBOSE # Verbose SCSI errors 159options PCIVERBOSE # Verbose PCI descriptions 160options MIIVERBOSE # Verbose MII autoconfuration messages 161#options PCI_CONFIG_DUMP # verbosely dump PCI config space 162#options DDB_KEYCODE=0x40 163options USERCONF # userconf(4) support 164#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 165options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 166 167# Development and Debugging options 168 169#options ARM700BUGTRACK # track the ARM700 swi bug 170#options PORTMASTER # Enable PortMaster only options 171#options DIAGNOSTIC # internally consistency checks 172#options PMAP_DEBUG # Enable pmap_debug_level code 173options DDB # in-kernel debugger 174options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 175makeoptions DEBUG="-g" # compile full symbol table 176options SYMTAB_SPACE=480000 177 178config netbsd root on ? type ? 179 180# The main bus device 181mainbus0 at root 182 183# The boot CPU 184cpu0 at mainbus? 185 186# Core logic 187footbridge0 at mainbus? 188 189# footbridge uart 190#fcom0 at footbridge? 191 192# system clock via footbridge 193#clock* at footbridge? 194 195# PCI bus via footbridge 196pci0 at footbridge? # PCI bus 197 198# ISA bus support 199pcib* at pci? dev ? function ? # ISA bridge 200isa* at pcib? 201 202 203# PCI IDE Controllers and Devices 204# PCI IDE controllers - see pciide(4) for supported hardware. 205# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know 206# how to set up DMA modes for this chip. This may work, or may cause 207# a machine hang with some controllers. 208#pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver 209slide* at pci? dev ? function ? # Symphony Labs IDE controllers 210 211# ATA (IDE) bus support 212atabus* at ata? 213 214# IDE drives 215# Flags are used only with controllers that support DMA operations 216# and mode settings (e.g. some pciide controllers) 217# The lowest order four bits (rightmost digit) of the flags define the PIO 218# mode to use, the next set of four bits the DMA mode and the third set the 219# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode 220# to use, and the last bit must be 1 for this setting to be used. 221# For DMA and UDMA, 0xf (1111) means 'disable'. 222# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. 223# (0xc=1100, 0xa=1010, 0xf=1111) 224# 0x0000 means "use whatever the drive claims to support". 225wd* at atabus? drive ? flags 0x0000 # the drives themselves 226 227# PCI network interfaces 228ne* at pci? dev ? function ? # NE2000 compat ethernet 229tlp* at pci? dev ? function ? # DECchip 21x4x (and clones) Ethernet 230options TLP_MATCH_21142 231 232# MII/PHY support 233icsphy* at mii? phy ? # ISC-189x PHYs 234ukphy* at mii? phy ? # generic unknown PHYs 235 236 237# WSCONS Support 238options WSEMUL_VT100 # VT100 / VT220 emulation 239 240# customization of console and kernel output - see dev/wscons/wsdisplayvar.h 241options WSDISPLAY_CUSTOM_OUTPUT # color customization from wsconsctl(8) 242#options WS_DEFAULT_FG=WSCOL_WHITE 243#options WS_DEFAULT_BG=WSCOL_BLACK 244#options WS_DEFAULT_COLATTR="(0)" 245#options WS_DEFAULT_MONOATTR="(0)" 246options WS_KERNEL_FG=WSCOL_GREEN 247#options WS_KERNEL_BG=WSCOL_BLACK 248options WS_KERNEL_COLATTR=WSATTR_HILIT 249#options WS_KERNEL_MONOATTR="(0)" 250 251# compatibility to other console drivers 252options WSDISPLAY_COMPAT_PCVT # emulate some ioctls 253options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls 254options WSDISPLAY_COMPAT_USL # VT handling 255options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 256 257options FONT_GALLANT12x22 # Sun PROM font look-alike 258 259pckbc0 at isa? 260pckbd* at pckbc? 261wskbd* at pckbd? console ? 262pms* at pckbc? 263wsmouse* at pms? mux 0 264 265igsfb* at pci? dev ? function ? 266wsdisplay* at igsfb? console ? 267 268 269# ISA Devices 270com0 at isa? port 0x3f8 irq 4 271lpt0 at isa? port 0x378 irq 7 272 273 274# Audio Devices 275 276# ISA audio devices 277sb0 at isa? port 0x220 irq 3 drq 1 drq2 7 # SoundBlaster 278opl* at sb? 279mpu* at sb? 280midi* at sb? # SB1 MIDI port 281 282# Audio support 283audio* at sb? 284 285# Pseudo-Devices 286 287pseudo-device crypto # /dev/crypto device 288pseudo-device swcrypto # software crypto implementation 289 290# disk/mass storage pseudo-devices 291#pseudo-device md 1 # memory disk device (ramdisk) 292pseudo-device vnd # disk-like interface to files 293#options VND_COMPRESSION # compressed vnd(4) 294pseudo-device fss 4 # file system snapshot device 295#pseudo-device cgd 4 # cryptographic disk devices 296 297# network pseudo-devices 298pseudo-device bpfilter # Berkeley packet filter 299#pseudo-device carp # Common Address Redundancy Protocol 300pseudo-device pppoe # PPP over Ethernet (RFC 2516) 301pseudo-device bridge # simple inter-network bridging 302#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 303pseudo-device loop # network loopback 304 305# miscellaneous pseudo-devices 306pseudo-device pty # pseudo-terminals 307pseudo-device rnd # /dev/random and in-kernel generator 308pseudo-device clockctl # user control of clock subsystem 309pseudo-device ksyms # /dev/ksyms 310#pseudo-device pf # PF packet filter 311#pseudo-device pflog # PF log if 312 313# wscons pseudo-devices 314pseudo-device wsmux # mouse & keyboard multiplexor 315#pseudo-device wsfont 316 317# Veriexec 318# 319# a pseudo device needed for veriexec 320#pseudo-device veriexec 1 321# 322# Uncomment the fingerprint methods below that are desired. Note that 323# removing fingerprint methods will have almost no impact on the kernel 324# code size. 325# 326#options VERIFIED_EXEC_FP_RMD160 327#options VERIFIED_EXEC_FP_SHA256 328#options VERIFIED_EXEC_FP_SHA384 329#options VERIFIED_EXEC_FP_SHA512 330#options VERIFIED_EXEC_FP_SHA1 331#options VERIFIED_EXEC_FP_MD5 332