GENERIC revision 1.76
1# $NetBSD: GENERIC,v 1.76 2006/02/02 21:32:09 reinoud Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21include "arch/netwinder/conf/std.netwinder" 22 23options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25# estimated number of users 26 27maxusers 32 28 29# Standard system options 30 31options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT 32#options NTP # NTP phase/frequency locked loop 33 34# Enable experimental buffer queue strategy for better responsiveness under 35# high disk I/O load. Use it with caution - it's not proven to be stable yet. 36#options BUFQ_READPRIO 37#options BUFQ_PRIOCSCAN 38 39# CPU options 40 41# For StrongARM systems 42options CPU_SA110 # Support the SA110 core 43makeoptions CPUFLAGS="-march=armv4 -mtune=strongarm" 44 45# FPA options 46 47#options ARMFPE # ARM Ltd FPE 48 49# Default console is wscons, if igsfb(4) and pckbc(4) are configured, 50# or com(4) otherwise. You can force a serial console with these options 51#options CONSDEVNAME="\"com\"",CONCOMADDR=0x3f8,CONSPEED=115200 52 53 54# File systems 55 56file-system FFS # UFS 57#file-system LFS # log-structured file system 58file-system MFS # memory file system 59file-system NFS # Network file system 60#file-system ADOSFS # AmigaDOS-compatible file system 61file-system EXT2FS # second extended file system (linux) 62#file-system CD9660 # ISO 9660 + Rock Ridge file system 63file-system MSDOSFS # MS-DOS file system 64file-system FDESC # /dev/fd 65file-system KERNFS # /kern 66file-system NULLFS # loopback file system 67#file-system PORTAL # portal filesystem (still experimental) 68file-system PROCFS # /proc 69#file-system UMAPFS # NULLFS + uid and gid remapping 70#file-system UNION # union file system 71file-system PTYFS # /dev/pts/N support 72#file-system TMPFS # experimental - Efficient memory file-system 73#file-system UDF # experimental - OSTA UDF CD/DVD file-system 74 75# File system options 76#options QUOTA # UFS quotas 77#options FFS_EI # FFS Endian Independant support 78#options FFS_NO_SNAPSHOT # No FFS snapshot support 79options NFSSERVER 80options SOFTDEP 81#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 82 83# Networking options 84 85#options GATEWAY # packet forwarding 86options INET # IP + ICMP + TCP + UDP 87options INET6 # IPV6 88#options IPSEC # IP security 89#options IPSEC_ESP # IP security (encryption part; define w/ IPSEC) 90#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 91#options IPSEC_DEBUG # debug for IP security 92#options MROUTING # IP multicast routing 93#options PIM # Protocol Independent Multicast 94#options NS # XNS 95#options NSIP # XNS tunneling over IP 96#options ISO,TPIP # OSI 97#options EON # OSI tunneling over IP 98#options CCITT,LLC,HDLC # X.25 99#options NETATALK # AppleTalk networking 100#options PFIL_HOOKS # pfil(9) packet filter hooks 101#options PPP_BSDCOMP # BSD-Compress compression support for PPP 102#options PPP_DEFLATE # Deflate compression support for PPP 103#options PPP_FILTER # Active filter support for PPP (requires bpf) 104#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 105 106#options ALTQ # Manipulate network interfaces' output queues 107#options ALTQ_BLUE # Stochastic Fair Blue 108#options ALTQ_CBQ # Class-Based Queueing 109#options ALTQ_CDNR # Diffserv Traffic Conditioner 110#options ALTQ_FIFOQ # First-In First-Out Queue 111#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 112#options ALTQ_HFSC # Hierarchical Fair Service Curve 113#options ALTQ_LOCALQ # Local queueing discipline 114#options ALTQ_PRIQ # Priority Queueing 115#options ALTQ_RED # Random Early Detection 116#options ALTQ_RIO # RED with IN/OUT 117#options ALTQ_WFQ # Weighted Fair Queueing 118 119options NFS_BOOT_BOOTP 120options NFS_BOOT_DHCP 121#options NFS_BOOT_BOOTPARAM 122 123# Compatibility options 124 125#options COMPAT_43 # 4.3BSD compatibility. 126options COMPAT_30 # NetBSD 3.0 compatibility. 127options COMPAT_20 # NetBSD 2.0 compatibility. 128options COMPAT_16 # NetBSD 1.6 compatibility. 129options COMPAT_15 # NetBSD 1.5 compatibility. 130options COMPAT_14 # NetBSD 1.4 compatibility. 131#options COMPAT_13 # NetBSD 1.3 compatibility. 132#options COMPAT_12 # NetBSD 1.2 compatibility. 133#options COMPAT_11 # NetBSD 1.1 compatibility. 134#options COMPAT_10 # NetBSD 1.0 compatibility. 135#options COMPAT_09 # NetBSD 0.9 compatibility. 136#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 137 138options COMPAT_LINUX # binary compatibility with Linux 139options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 140 141# Shared memory options 142 143options SYSVMSG # System V-like message queues 144options SYSVSEM # System V-like semaphores 145#options SEMMNI=10 # number of semaphore identifiers 146#options SEMMNS=60 # number of semaphores in system 147#options SEMUME=10 # max number of undo entries per process 148#options SEMMNU=30 # number of undo structures in system 149options SYSVSHM # System V-like memory sharing 150options SHMMAXPGS=1024 # 1024 pages is the default 151options P1003_1B_SEMAPHORE # p1003.1b semaphore support 152 153# Device options 154 155#options MEMORY_DISK_HOOKS # boottime setup of ramdisk 156#options MEMORY_DISK_ROOT_SIZE=3400 # Size in blocks 157#options MEMORY_DISK_IS_ROOT # use memory disk as root 158 159# Miscellaneous kernel options 160options KTRACE # system call tracing, a la ktrace(1) 161options SYSTRACE # system call vetting via systrace(1) 162options IRQSTATS # manage IRQ statistics 163#options LKM # loadable kernel modules 164#options KMEMSTATS # kernel memory statistics 165#options SCSIVERBOSE # Verbose SCSI errors 166options PCIVERBOSE # Verbose PCI descriptions 167options MIIVERBOSE # Verbose MII autoconfuration messages 168#options PCI_CONFIG_DUMP # verbosely dump PCI config space 169#options DDB_KEYCODE=0x40 170options USERCONF # userconf(4) support 171#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 172options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 173 174# Development and Debugging options 175 176#options ARM700BUGTRACK # track the ARM700 swi bug 177#options PORTMASTER # Enable PortMaster only options 178#options DIAGNOSTIC # internally consistency checks 179#options PMAP_DEBUG # Enable pmap_debug_level code 180#options IPKDB # remote kernel debugging 181options DDB # in-kernel debugger 182options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 183makeoptions DEBUG="-g" # compile full symbol table 184options SYMTAB_SPACE=480000 185 186config netbsd root on ? type ? 187 188# The main bus device 189mainbus0 at root 190 191# The boot CPU 192cpu0 at mainbus? 193 194# Core logic 195footbridge0 at mainbus? 196 197# footbridge uart 198#fcom0 at footbridge? 199 200# system clock via footbridge 201#clock* at footbridge? 202 203# time-of-day device via footbridge 204todclock0 at footbridge? 205 206# PCI bus via footbridge 207pci0 at footbridge? # PCI bus 208 209# ISA bus support 210pcib* at pci? dev ? function ? # ISA bridge 211isa* at pcib? 212 213 214# PCI IDE Controllers and Devices 215# PCI IDE controllers - see pciide(4) for supported hardware. 216# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know 217# how to set up DMA modes for this chip. This may work, or may cause 218# a machine hang with some controllers. 219#pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver 220slide* at pci? dev ? function ? # Symphony Labs IDE controllers 221 222# ATA (IDE) bus support 223atabus* at ata? 224 225# IDE drives 226# Flags are used only with controllers that support DMA operations 227# and mode settings (e.g. some pciide controllers) 228# The lowest order four bits (rightmost digit) of the flags define the PIO 229# mode to use, the next set of four bits the DMA mode and the third set the 230# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode 231# to use, and the last bit must be 1 for this setting to be used. 232# For DMA and UDMA, 0xf (1111) means 'disable'. 233# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. 234# (0xc=1100, 0xa=1010, 0xf=1111) 235# 0x0000 means "use whatever the drive claims to support". 236wd* at atabus? drive ? flags 0x0000 # the drives themselves 237 238# PCI network interfaces 239ne* at pci? dev ? function ? # NE2000 compat ethernet 240tlp* at pci? dev ? function ? # DECchip 21x4x (and clones) Ethernet 241options TLP_MATCH_21142 242 243# MII/PHY support 244icsphy* at mii? phy ? # ISC-189x PHYs 245ukphy* at mii? phy ? # generic unknown PHYs 246 247 248# WSCONS Support 249options WSEMUL_VT100 # VT100 / VT220 emulation 250# different kernel output - see dev/wscons/wsdisplayvar.h 251options WS_KERNEL_FG=WSCOL_GREEN 252#options WS_KERNEL_BG=WSCOL_BLACK 253options WS_KERNEL_COLATTR=WSATTR_HILIT 254# compatibility to other console drivers 255options WSDISPLAY_COMPAT_PCVT # emulate some ioctls 256options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls 257options WSDISPLAY_COMPAT_USL # VT handling 258options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 259 260options FONT_GALLANT12x22 # Sun PROM font look-alike 261 262pckbc0 at isa? 263pckbd* at pckbc? 264wskbd* at pckbd? console ? 265pms* at pckbc? 266wsmouse* at pms? mux 0 267 268igsfb* at pci? dev ? function ? 269wsdisplay* at igsfb? console ? 270 271 272# ISA Devices 273com0 at isa? port 0x3f8 irq 4 274lpt0 at isa? port 0x378 irq 7 275 276 277# Audio Devices 278 279# ISA audio devices 280sb0 at isa? port 0x220 irq 3 drq 1 drq2 7 # SoundBlaster 281opl* at sb? 282mpu* at sb? 283midi* at sb? # SB1 MIDI port 284 285# Audio support 286audio* at sb? 287 288# Pseudo-Devices 289 290pseudo-device crypto # /dev/crypto device 291pseudo-device swcrypto # software crypto implementation 292 293# disk/mass storage pseudo-devices 294#pseudo-device md 1 # memory disk device (ramdisk) 295pseudo-device vnd 4 # disk-like interface to files 296#options VND_COMPRESSION # compressed vnd(4) 297pseudo-device fss 4 # file system snapshot device 298#pseudo-device cgd 4 # cryptographic disk devices 299 300# network pseudo-devices 301pseudo-device bpfilter 4 # Berkeley packet filter 302pseudo-device pppoe # PPP over Ethernet (RFC 2516) 303pseudo-device bridge # simple inter-network bridging 304#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 305pseudo-device loop # network loopback 306 307# miscellaneous pseudo-devices 308pseudo-device pty # pseudo-terminals 309pseudo-device rnd # /dev/random and in-kernel generator 310pseudo-device clockctl # user control of clock subsystem 311pseudo-device ksyms # /dev/ksyms 312#pseudo-device pf # PF packet filter 313#pseudo-device pflog # PF log if 314 315# wscons pseudo-devices 316pseudo-device wsmux # mouse & keyboard multiplexor 317#pseudo-device wsfont 318 319# Veriexec 320#options VERIFIED_EXEC 321# 322# a pseudo device needed for veriexec 323#pseudo-device veriexec 1 324# 325# Uncomment the fingerprint methods below that are desired. Note that 326# removing fingerprint methods will have almost no impact on the kernel 327# code size. 328# 329#options VERIFIED_EXEC_FP_RMD160 330#options VERIFIED_EXEC_FP_SHA256 331#options VERIFIED_EXEC_FP_SHA384 332#options VERIFIED_EXEC_FP_SHA512 333#options VERIFIED_EXEC_FP_SHA1 334#options VERIFIED_EXEC_FP_MD5 335