GENERIC revision 1.68
1# $NetBSD: GENERIC,v 1.68 2005/07/07 17:05:57 tron Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21include "arch/mmeye/conf/std.mmeye" 22 23options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25#ident "GENERIC-$Revision: 1.68 $" 26 27maxusers 16 # estimated number of users 28 29# CPU support 30options SH3 31options SH7708R # 100MHz 32options MMEYE 33options MMEYE_NEW_INT 34#options MMEYE_NO_CACHE 35options PCLOCK=33330000 # 33.33MHz 36options INITTODR_ALWAYS_USE_RTC 37 38# Standard system options 39#options INSECURE # disable kernel security levels 40 41options HZ=50 # clock interrupt generates every 1/HZ sec 42options NTP # NTP phase/frequency locked loop 43options KTRACE # system call tracing via ktrace(1) 44options SYSTRACE # system call vetting via systrace(1) 45 46options SYSVMSG # System V-like message queues 47options SYSVSEM # System V-like semaphores 48#options SEMMNI=10 # number of semaphore identifiers 49#options SEMMNS=60 # number of semaphores in system 50#options SEMUME=10 # max number of undo entries per process 51#options SEMMNU=30 # number of undo structures in system 52options SYSVSHM # System V-like memory sharing 53#options SHMMAXPGS=1024 # 1024 pages is the default 54options P1003_1B_SEMAPHORE # p1003.1b semaphore support 55 56#options LKM # loadable kernel modules 57 58options USERCONF # userconf(4) support 59#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 60options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 61 62# Diagnostic/debugging support options 63#options DIAGNOSTIC # cheap kernel consistency checks 64#options DEBUG # expensive debugging checks/support 65#options KMEMSTATS # kernel memory statistics (vmstat -m) 66#options DDB # in-kernel debugger 67#options SYSCALL_DEBUG 68#makeoptions DEBUG="-g" # compile full symbol table 69 70# Compatibility options 71options COMPAT_14 # NetBSD 1.4, 72options COMPAT_16 # NetBSD 1.6, 73options COMPAT_20 # NetBSD 2.0, 74options COMPAT_43 # and 4.3BSD 75#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 76options BSDDISKLABEL_EI # endian independent disklabel support 77options COMPAT_MMEYE_OLDLABEL # old mmeye's disklabel support 78options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 79 80# Executable format options 81options EXEC_COFF # COFF executables 82options EXEC_ELF32 # 32-bit ELF executables 83 84# File systems 85file-system FFS # UFS 86file-system EXT2FS # second extended file system (linux) 87file-system LFS # log-structured file system 88file-system MFS # memory file system 89file-system NFS # Network File System client 90file-system CD9660 # ISO 9660 + Rock Ridge file system 91file-system MSDOSFS # MS-DOS file system 92file-system FDESC # /dev/fd 93file-system KERNFS # /kern 94file-system NULLFS # loopback file system 95file-system OVERLAY # overlay file system 96file-system PORTAL # portal filesystem (still experimental) 97file-system PROCFS # /proc 98file-system UMAPFS # NULLFS + uid and gid remapping 99file-system UNION # union file system 100file-system CODA # Coda File System; also needs vcoda (below) 101#file-system PTYFS # experimental - /dev/ptm support 102 103# File system options 104#options QUOTA # UFS quotas 105#options FFS_EI # FFS Endian Independant support 106options SOFTDEP # FFS soft updates support. 107#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 108options NFSSERVER # Network File System server 109#options FFS_NO_SNAPSHOT # ffs snapshots 110#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 111 # immutable) behave as system flags. 112 113# Networking options 114#options GATEWAY # packet forwarding 115options INET # IP + ICMP + TCP + UDP 116options INET6 # IPV6 117#options IPSEC # IP security 118#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 119#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 120#options IPSEC_DEBUG # debug for IP security 121#options MROUTING # IP multicast routing 122#options PIM # Protocol Independent Multicast 123#options NS # XNS 124#options NSIP # XNS tunneling over IP 125#options ISO,TPIP # OSI 126#options EON # OSI tunneling over IP 127#options CCITT,LLC,HDLC # X.25 128#options NETATALK # AppleTalk networking protocols 129#options PPP_BSDCOMP # BSD-Compress compression support for PPP 130#options PPP_DEFLATE # Deflate compression support for PPP 131#options PPP_FILTER # Active filter support for PPP (requires bpf) 132#options PFIL_HOOKS # pfil(9) packet filter hooks 133#options IPFILTER_LOG # ipmon(8) log support 134#options IPFILTER_DEFAULT_BLOCK # block all packets by default 135#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 136 137#options ALTQ # Manipulate network interfaces' output queues 138#options ALTQ_BLUE # Stochastic Fair Blue 139#options ALTQ_CBQ # Class-Based Queueing 140#options ALTQ_CDNR # Diffserv Traffic Conditioner 141#options ALTQ_FIFOQ # First-In First-Out Queue 142#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 143#options ALTQ_HFSC # Hierarchical Fair Service Curve 144#options ALTQ_LOCALQ # Local queueing discipline 145#options ALTQ_PRIQ # Priority Queueing 146#options ALTQ_RED # Random Early Detection 147#options ALTQ_RIO # RED with IN/OUT 148#options ALTQ_WFQ # Weighted Fair Queueing 149 150options NFS_BOOT_DHCP # Support DHCP NFS root 151 152# These options enable verbose messages for several subsystems. 153# Warning, these may compile large string tables into the kernel! 154#options PCIVERBOSE # verbose PCI device autoconfig messages 155#options PCI_CONFIG_DUMP # verbosely dump PCI config space 156options PCMCIAVERBOSE # verbose PCMCIA configuration messages 157options SCSIVERBOSE # human readable SCSI error messages 158#options USBVERBOSE # verbose USB device autoconfig messages 159 160# Kernel root file system and dump configuration. 161config netbsd root on ? type ? 162 163# 164# Device configuration 165# 166 167mainbus0 at root 168 169shb* at mainbus? 170 171com0 at mainbus? 172com1 at mainbus? 173 174# SH PCMCIA controllers 175mmeyepcmcia0 at mainbus? 176mmeyepcmcia1 at mainbus? 177 178# PCMCIA bus support 179pcmcia* at mmeyepcmcia? controller ? socket ? 180 181com* at pcmcia? function ? # Modems and serial cards 182wdc* at pcmcia? function ? 183atabus* at ata? 184wd* at atabus? drive ? # the drives themselves 185 186ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 187mbe* at pcmcia? function ? # MB8696x based Ethernet 188ne* at pcmcia? function ? # NE2000-compatible Ethernet 189sm* at pcmcia? function ? # Megahertz Ethernet 190 191# Pseudo-Devices 192 193pseudo-device ccd 4 # concatenated/striped disk devices 194#pseudo-device cgd 4 # cryptographic disk devices 195#pseudo-device raid 8 # RAIDframe disk driver 196#options RAID_AUTOCONFIG # auto-configuration of RAID components 197# Options to enable various other RAIDframe RAID types. 198# options RF_INCLUDE_EVENODD=1 199# options RF_INCLUDE_RAID5_RS=1 200# options RF_INCLUDE_PARITYLOGGING=1 201# options RF_INCLUDE_CHAINDECLUSTER=1 202# options RF_INCLUDE_INTERDECLUSTER=1 203# options RF_INCLUDE_PARITY_DECLUSTERING=1 204# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 205pseudo-device fss 4 # file system snapshot device 206pseudo-device vnd 4 # disk-like interface to files 207pseudo-device bpfilter 8 # Berkeley packet filter 208pseudo-device ipfilter # IP filter (firewall) and NAT 209pseudo-device loop # network loopback 210pseudo-device ppp 2 # Point-to-Point Protocol 211pseudo-device pppoe # PPP over Ethernet (RFC 2516) 212pseudo-device sl 2 # Serial Line IP 213pseudo-device strip 2 # Starmode Radio IP (Metricom) 214pseudo-device tun 2 # network tunneling over tty 215pseudo-device tap # virtual Ethernet 216pseudo-device gre 2 # generic L3 over IP tunnel 217pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 218#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 219#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 220pseudo-device vlan # IEEE 802.1q encapsulation 221pseudo-device bridge # simple inter-network bridging 222#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 223pseudo-device pty # pseudo-terminals 224pseudo-device rnd # /dev/random and in-kernel generator 225pseudo-device vcoda 4 # coda minicache <-> venus comm. 226#pseudo-device md 1 # memory disk device (ramdisk) 227pseudo-device clockctl # user control of clock subsystem 228pseudo-device ksyms # /dev/ksyms 229#pseudo-device pf # PF packet filter 230#pseudo-device pflog # PF log if 231 232# Enable the hooks used for initializing the root memory-disk. 233#options MEMORY_DISK_HOOKS 234#options MEMORY_DISK_IS_ROOT # force root on memory disk 235#options MEMORY_DISK_SERVER=0 # no userspace memory disk support 236#options MEMORY_DISK_ROOT_SIZE=3074 # size of memory disk, in blocks 237