GENERIC revision 1.58
1# $NetBSD: GENERIC,v 1.58 2004/07/15 03:53:50 atatat Exp $
2#
3# GENERIC machine description file
4# 
5# This machine description file is used to generate the default NetBSD
6# kernel.  The generic kernel does not include all options, subsystems
7# and device drivers, but should be useful for most applications.
8#
9# The machine description file can be customised for your specific
10# machine to reduce the kernel size and improve its performance.
11#
12# For further information on compiling NetBSD kernels, see the config(8)
13# man page.
14#
15# For further information on hardware support for this architecture, see
16# the intro(4) man page.  For further information about kernel options
17# for this architecture, see the options(4) man page.  For an explanation
18# of each device driver in this file see the section 4 man page for the
19# device.
20
21include 	"arch/mmeye/conf/std.mmeye"
22
23options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
24
25#ident 		"GENERIC-$Revision: 1.58 $"
26
27maxusers	16		# estimated number of users
28
29# CPU support
30options		SH3
31options 	SH7708R		# 100MHz
32options 	MMEYE
33options 	MMEYE_NEW_INT
34#options 	MMEYE_NO_CACHE
35options 	PCLOCK=33330000		# 33.33MHz
36options 	INITTODR_ALWAYS_USE_RTC
37
38# Standard system options
39#options 	INSECURE	# disable kernel security levels
40
41options 	HZ=50		# clock interrupt generates every 1/HZ sec
42options 	NTP		# NTP phase/frequency locked loop
43options 	KTRACE		# system call tracing via ktrace(1)
44options 	SYSTRACE	# system call vetting via systrace(1)
45
46options 	SYSVMSG		# System V-like message queues
47options 	SYSVSEM		# System V-like semaphores
48#options 	SEMMNI=10	# number of semaphore identifiers
49#options 	SEMMNS=60	# number of semaphores in system
50#options 	SEMUME=10	# max number of undo entries per process
51#options 	SEMMNU=30	# number of undo structures in system
52options 	SYSVSHM		# System V-like memory sharing
53#options 	SHMMAXPGS=1024	# 1024 pages is the default
54options 	P1003_1B_SEMAPHORE # p1003.1b semaphore support
55
56#options 	LKM		# loadable kernel modules
57
58options 	USERCONF	# userconf(4) support
59#options	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
60options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel
61
62# Diagnostic/debugging support options
63#options 	DIAGNOSTIC	# cheap kernel consistency checks
64#options 	DEBUG		# expensive debugging checks/support
65#options 	KMEMSTATS	# kernel memory statistics (vmstat -m)
66#options 	DDB		# in-kernel debugger
67#options 	SYSCALL_DEBUG
68#makeoptions	DEBUG="-g"	# compile full symbol table
69
70# Compatibility options
71options 	COMPAT_14	# NetBSD 1.4,
72options 	COMPAT_43	# and 4.3BSD
73#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
74options 	BSDDISKLABEL_EI	# endian independent disklabel support
75options 	COMPAT_MMEYE_OLDLABEL	# old mmeye's disklabel support
76
77# Executable format options
78options 	EXEC_COFF	# COFF executables
79options 	EXEC_ELF32	# 32-bit ELF executables
80
81# File systems
82file-system 	FFS		# UFS
83file-system 	EXT2FS		# second extended file system (linux)
84file-system 	LFS		# log-structured file system
85file-system 	MFS		# memory file system
86file-system 	NFS		# Network File System client
87file-system 	CD9660		# ISO 9660 + Rock Ridge file system
88file-system 	MSDOSFS		# MS-DOS file system
89file-system 	FDESC		# /dev/fd
90file-system 	KERNFS		# /kern
91file-system 	NULLFS		# loopback file system
92file-system 	OVERLAY		# overlay file system
93file-system 	PORTAL		# portal filesystem (still experimental)
94file-system 	PROCFS		# /proc
95file-system 	UMAPFS		# NULLFS + uid and gid remapping
96file-system 	UNION		# union file system
97file-system	CODA		# Coda File System; also needs vcoda (below)
98
99# File system options
100#options 	QUOTA		# UFS quotas
101#options 	FFS_EI		# FFS Endian Independant support
102options 	SOFTDEP		# FFS soft updates support.
103options 	NFSSERVER	# Network File System server
104#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
105				# immutable) behave as system flags.
106
107# Networking options
108#options 	GATEWAY		# packet forwarding
109options 	INET		# IP + ICMP + TCP + UDP
110options 	INET6		# IPV6
111#options 	IPSEC		# IP security
112#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
113#options 	IPSEC_DEBUG	# debug for IP security
114#options 	MROUTING	# IP multicast routing
115#options 	NS		# XNS
116#options 	NSIP		# XNS tunneling over IP
117#options 	ISO,TPIP	# OSI
118#options 	EON		# OSI tunneling over IP
119#options 	CCITT,LLC,HDLC	# X.25
120#options 	NETATALK	# AppleTalk networking protocols
121#options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
122#options 	PPP_DEFLATE	# Deflate compression support for PPP
123#options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
124#options 	PFIL_HOOKS	# pfil(9) packet filter hooks
125#options 	IPFILTER_LOG	# ipmon(8) log support
126#options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
127#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
128
129#options 	ALTQ		# Manipulate network interfaces' output queues
130#options 	ALTQ_BLUE	# Stochastic Fair Blue
131#options 	ALTQ_CBQ	# Class-Based Queueing
132#options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
133#options 	ALTQ_FIFOQ	# First-In First-Out Queue
134#options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
135#options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
136#options 	ALTQ_LOCALQ	# Local queueing discipline
137#options 	ALTQ_PRIQ	# Priority Queueing
138#options 	ALTQ_RED	# Random Early Detection
139#options 	ALTQ_RIO	# RED with IN/OUT
140#options 	ALTQ_WFQ	# Weighted Fair Queueing
141
142options 	NFS_BOOT_DHCP	# Support DHCP NFS root
143
144# These options enable verbose messages for several subsystems.
145# Warning, these may compile large string tables into the kernel!
146#options 	PCIVERBOSE	# verbose PCI device autoconfig messages
147#options 	PCI_CONFIG_DUMP	# verbosely dump PCI config space
148options 	PCMCIAVERBOSE	# verbose PCMCIA configuration messages
149options 	SCSIVERBOSE	# human readable SCSI error messages
150#options 	USBVERBOSE	# verbose USB device autoconfig messages
151
152# Kernel root file system and dump configuration.
153config		netbsd	root on ? type ?
154
155#
156# Device configuration
157#
158
159mainbus0 at root
160
161shb*	at mainbus?
162
163com0	at mainbus?
164com1	at mainbus?
165
166# SH PCMCIA controllers
167mmeyepcmcia0	at mainbus?
168mmeyepcmcia1	at mainbus?
169
170# PCMCIA bus support
171pcmcia*	at mmeyepcmcia? controller ? socket ?
172
173com*	at pcmcia? function ?		# Modems and serial cards
174wdc*	at pcmcia? function ?
175atabus* at ata?
176wd*	at atabus? drive ?			# the drives themselves
177
178ep*	at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
179mbe*	at pcmcia? function ?		# MB8696x based Ethernet
180ne*	at pcmcia? function ?		# NE2000-compatible Ethernet
181sm*	at pcmcia? function ?		# Megahertz Ethernet
182
183# Pseudo-Devices
184
185pseudo-device	ccd		4	# concatenated/striped disk devices
186#pseudo-device	cgd		4	# cryptographic disk devices
187#pseudo-device	raid		8	# RAIDframe disk driver
188#options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
189# Options to enable various other RAIDframe RAID types.
190# options	RF_INCLUDE_EVENODD=1
191# options	RF_INCLUDE_RAID5_RS=1
192# options	RF_INCLUDE_PARITYLOGGING=1
193# options	RF_INCLUDE_CHAINDECLUSTER=1
194# options	RF_INCLUDE_INTERDECLUSTER=1
195# options 	RF_INCLUDE_PARITY_DECLUSTERING=1
196# options	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
197pseudo-device	vnd		4	# disk-like interface to files
198pseudo-device	bpfilter	8	# Berkeley packet filter
199pseudo-device	ipfilter		# IP filter (firewall) and NAT
200pseudo-device	loop			# network loopback
201pseudo-device	ppp		2	# Point-to-Point Protocol
202pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
203pseudo-device	sl		2	# Serial Line IP
204pseudo-device	strip		2	# Starmode Radio IP (Metricom)
205pseudo-device	tun		2	# network tunneling over tty
206pseudo-device	gre		2	# generic L3 over IP tunnel
207pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
208#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
209#pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
210pseudo-device	vlan			# IEEE 802.1q encapsulation
211pseudo-device	bridge			# simple inter-network bridging
212#options	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
213pseudo-device	pty			# pseudo-terminals
214pseudo-device	rnd			# /dev/random and in-kernel generator
215pseudo-device	vcoda		4	# coda minicache <-> venus comm.
216#pseudo-device	md		1	# memory disk device (ramdisk)
217pseudo-device	clockctl		# user control of clock subsystem
218pseudo-device	ksyms			# /dev/ksyms
219#pseudo-device	pf			# PF packet filter
220#pseudo-device	pflog			# PF log if
221
222# Enable the hooks used for initializing the root memory-disk.
223#options 	MEMORY_DISK_HOOKS
224#options 	MEMORY_DISK_IS_ROOT	# force root on memory disk
225#options 	MEMORY_DISK_SERVER=0	# no userspace memory disk support
226#options 	MEMORY_DISK_ROOT_SIZE=3074	# size of memory disk, in blocks
227