vrpiu.c revision 1.37
1/* $NetBSD: vrpiu.c,v 1.37 2006/09/24 03:53:07 jmcneill Exp $ */ 2 3/* 4 * Copyright (c) 1999-2003 TAKEMURA Shin All rights reserved. 5 * Copyright (c) 2000-2001 SATO Kazumi, All rights reserved. 6 * Copyright (c) 1999-2001 PocketBSD Project. All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 * 29 */ 30 31/* 32 * A/D polling part written by SATO Kazumi. 33 */ 34 35#include <sys/cdefs.h> 36__KERNEL_RCSID(0, "$NetBSD: vrpiu.c,v 1.37 2006/09/24 03:53:07 jmcneill Exp $"); 37 38#include <sys/param.h> 39#include <sys/systm.h> 40#include <sys/device.h> 41#include <sys/kernel.h> 42#include <sys/callout.h> 43#include <sys/boot_flag.h> 44 45#include <dev/wscons/wsconsio.h> 46#include <dev/wscons/wsmousevar.h> 47 48#include <machine/bus.h> 49#include <machine/platid.h> 50#include <machine/platid_mask.h> 51#include <machine/config_hook.h> 52 53#include <dev/hpc/hpctpanelvar.h> 54 55#include <dev/hpc/hpcbatteryvar.h> 56#include <dev/hpc/hpcbatterytable.h> 57 58#include <hpcmips/vr/vrcpudef.h> 59#include <hpcmips/vr/vripif.h> 60#include <hpcmips/vr/cmureg.h> 61#include <hpcmips/vr/vrpiuvar.h> 62#define PIUB_REG_OFFSSET 0 63#include <hpcmips/vr/vrpiureg.h> 64 65/* 66 * contant and macro definitions 67 */ 68#define VRPIUDEBUG 69#ifdef VRPIUDEBUG 70int vrpiu_debug = 0; 71#define DPRINTF(arg) if (vrpiu_debug) printf arg; 72#define VPRINTF(arg) if (bootverbose || vrpiu_debug) printf arg; 73#else 74#define DPRINTF(arg) 75#define VPRINTF(arg) if (bootverbose) printf arg; 76#endif 77 78#ifndef VRPIU_NO_ADHOC_BATTERY_EVENT 79#define VRPIU_ADHOC_BATTERY_EVENT /* currently... */ 80#endif /* VRPIU_NO_ADHOC_BATTERY_EVENT */ 81 82#ifndef VRPIU_AD_POLL_INTERVAL 83#define VRPIU_AD_POLL_INTERVAL 60 /* interval is 60 sec */ 84#endif /* VRPIU_AD_POLL_INTERTVAL */ 85 86#define PIUSIVL_SCANINTVAL_MIN 333 /* 10msec */ 87#define PIUSIVL_SCANINTVAL_MAX PIUSIVL_SCANINTVAL_MASK /* 60msec */ 88#define VRPIU_TP_SCAN_TIMEOUT (hz/10) /* timeout is 100msec */ 89 90#define TP_INTR (PIUINT_ALLINTR & ~PIUINT_PADADPINTR) 91#define AD_INTR (PIUINT_PADADPINTR) 92 93/* 94 * data types 95 */ 96/* struct vrpiu_softc is defined in vrpiuvar.h */ 97 98/* 99 * function prototypes 100 */ 101static int vrpiumatch(struct device *, struct cfdata *, void *); 102static void vrpiuattach(struct device *, struct device *, void *); 103static void vrc4173piuattach(struct device *, struct device *, void *); 104static void vrpiu_init(struct vrpiu_softc *, void *); 105 106static void vrpiu_write(struct vrpiu_softc *, int, unsigned short); 107static u_short vrpiu_read(struct vrpiu_softc *, int); 108 109static int vrpiu_intr(void *); 110static void vrpiu_tp_intr(struct vrpiu_softc *); 111static void vrpiu_ad_intr(struct vrpiu_softc *); 112#ifdef DEBUG 113static void vrpiu_dump_cntreg(unsigned int); 114#endif 115 116static int vrpiu_tp_enable(void *); 117static int vrpiu_tp_ioctl(void *, u_long, caddr_t, int, struct lwp *); 118static void vrpiu_tp_disable(void *); 119static void vrpiu_tp_up(struct vrpiu_softc *); 120static void vrpiu_tp_timeout(void *); 121int vrpiu_ad_enable(void *); 122void vrpiu_ad_disable(void *); 123static void vrpiu_start_powerstate(void *); 124static void vrpiu_calc_powerstate(struct vrpiu_softc *); 125static void vrpiu_send_battery_event(struct vrpiu_softc *); 126static void vrpiu_power(int, void *); 127static u_int scan_interval(u_int data); 128 129/* mra is defined in mra.c */ 130int mra_Y_AX1_BX2_C(int *y, int ys, int *x1, int x1s, int *x2, int x2s, 131 int n, int scale, int *a, int *b, int *c); 132 133/* 134 * static or global variables 135 */ 136CFATTACH_DECL(vrpiu, sizeof(struct vrpiu_softc), 137 vrpiumatch, vrpiuattach, NULL, NULL); 138CFATTACH_DECL(vrc4173piu, sizeof(struct vrpiu_softc), 139 vrpiumatch, vrc4173piuattach, NULL, NULL); 140 141const struct wsmouse_accessops vrpiu_accessops = { 142 vrpiu_tp_enable, 143 vrpiu_tp_ioctl, 144 vrpiu_tp_disable, 145}; 146 147int vrpiu_ad_poll_interval = VRPIU_AD_POLL_INTERVAL; 148 149/* 150 * function definitions 151 */ 152static inline void 153vrpiu_write(struct vrpiu_softc *sc, int port, unsigned short val) 154{ 155 156 bus_space_write_2(sc->sc_iot, sc->sc_ioh, port, val); 157} 158 159static inline u_short 160vrpiu_read(struct vrpiu_softc *sc, int port) 161{ 162 163 return (bus_space_read_2(sc->sc_iot, sc->sc_ioh, port)); 164} 165 166static inline u_short 167vrpiu_buf_read(struct vrpiu_softc *sc, int port) 168{ 169 170 return (bus_space_read_2(sc->sc_iot, sc->sc_buf_ioh, port)); 171} 172 173static int 174vrpiumatch(struct device *parent, struct cfdata *cf, void *aux) 175{ 176 177 return (1); 178} 179 180static void 181vrpiuattach(struct device *parent, struct device *self, void *aux) 182{ 183 struct vrpiu_softc *sc = (struct vrpiu_softc *)self; 184 185 sc->sc_ab_paddata_mask = PIUAB_PADDATA_MASK; 186 sc->sc_pb_paddata_mask = PIUPB_PADDATA_MASK; 187 sc->sc_pb_paddata_max = PIUPB_PADDATA_MAX; 188 vrpiu_init(sc, aux); 189} 190 191static void 192vrc4173piuattach(struct device *parent, struct device *self, void *aux) 193{ 194 struct vrpiu_softc *sc = (struct vrpiu_softc *)self; 195 196 sc->sc_ab_paddata_mask = VRC4173PIUAB_PADDATA_MASK; 197 sc->sc_pb_paddata_mask = VRC4173PIUPB_PADDATA_MASK; 198 sc->sc_pb_paddata_max = VRC4173PIUPB_PADDATA_MAX; 199 vrpiu_init(sc, aux); 200} 201 202static void 203vrpiu_init(struct vrpiu_softc *sc, void *aux) 204{ 205 struct vrip_attach_args *va = aux; 206 struct wsmousedev_attach_args wsmaa; 207 int res; 208 bus_space_tag_t iot = va->va_iot; 209 struct platid_data *p; 210 211 if (va->va_parent_ioh != 0) 212 res = bus_space_subregion(iot, va->va_parent_ioh, va->va_addr, 213 va->va_size, &sc->sc_ioh); 214 else 215 res = bus_space_map(iot, va->va_addr, va->va_size, 0, 216 &sc->sc_ioh); 217 if (res != 0) { 218 printf(": can't map bus space\n"); 219 return; 220 } 221 if (va->va_parent_ioh != 0) 222 res = bus_space_subregion(iot, va->va_parent_ioh, va->va_addr2, 223 va->va_size2, &sc->sc_buf_ioh); 224 else 225 res = bus_space_map(iot, va->va_addr2, va->va_size2, 0, 226 &sc->sc_buf_ioh); 227 if (res != 0) { 228 printf(": can't map second bus space\n"); 229 return; 230 } 231 232 sc->sc_iot = iot; 233 sc->sc_unit = va->va_unit; 234 sc->sc_vrip = va->va_vc; 235 236 sc->sc_interval = scan_interval(WSMOUSE_RES_DEFAULT); 237 if ((p = platid_search_data(&platid, hpcbattery_parameters)) == NULL) 238 sc->sc_battery_spec = NULL; 239 else 240 sc->sc_battery_spec = p->data; 241 242 /* 243 * disable device until vrpiu_enable called 244 */ 245 sc->sc_tpstat = VRPIU_TP_STAT_DISABLE; 246 247 /* initialize touch panel timeout structure */ 248 callout_init(&sc->sc_tptimeout); 249 250 /* initialize calibration context */ 251 tpcalib_init(&sc->sc_tpcalib); 252#if 1 253 /* 254 * XXX, calibrate parameters 255 */ 256 { 257 int i; 258 static const struct { 259 platid_mask_t *mask; 260 struct wsmouse_calibcoords coords; 261 } calibrations[] = { 262 { &platid_mask_MACH_NEC_MCR_700, 263 { 0, 0, 799, 599, 264 4, 265 { { 115, 80, 0, 0 }, 266 { 115, 966, 0, 599 }, 267 { 912, 80, 799, 0 }, 268 { 912, 966, 799, 599 } } } }, 269 { &platid_mask_MACH_NEC_MCR_700A, 270 { 0, 0, 799, 599, 271 4, 272 { { 115, 80, 0, 0 }, 273 { 115, 966, 0, 599 }, 274 { 912, 80, 799, 0 }, 275 { 912, 966, 799, 599 } } } }, 276 { &platid_mask_MACH_NEC_MCR_730, 277 { 0, 0, 799, 599, 278 4, 279 { { 115, 80, 0, 0 }, 280 { 115, 966, 0, 599 }, 281 { 912, 80, 799, 0 }, 282 { 912, 966, 799, 599 } } } }, 283 { &platid_mask_MACH_NEC_MCR_730A, 284 { 0, 0, 799, 599, 285 4, 286 { { 115, 80, 0, 0 }, 287 { 115, 966, 0, 599 }, 288 { 912, 80, 799, 0 }, 289 { 912, 966, 799, 599 } } } }, 290 { NULL, /* samples got on my MC-R500 */ 291 { 0, 0, 639, 239, 292 5, 293 { { 502, 486, 320, 120 }, 294 { 55, 109, 0, 0 }, 295 { 54, 913, 0, 239 }, 296 { 973, 924, 639, 239 }, 297 { 975, 123, 639, 0 } } } }, 298 }; 299 for (i = 0; ; i++) { 300 if (calibrations[i].mask == NULL 301 || platid_match(&platid, calibrations[i].mask)) 302 break; 303 } 304 tpcalib_ioctl(&sc->sc_tpcalib, WSMOUSEIO_SCALIBCOORDS, 305 (caddr_t)__UNCONST(&calibrations[i].coords), 0, 0); 306 } 307#endif 308 309 /* install interrupt handler and enable interrupt */ 310 if (!(sc->sc_handler = 311 vrip_intr_establish(sc->sc_vrip, sc->sc_unit, 0, IPL_TTY, 312 vrpiu_intr, sc))) { 313 printf (": can't map interrupt line.\n"); 314 return; 315 } 316 317 /* mask level2 interrupt, stop scan sequencer and mask clock to piu */ 318 vrpiu_tp_disable(sc); 319 320 printf("\n"); 321 322 wsmaa.accessops = &vrpiu_accessops; 323 wsmaa.accesscookie = sc; 324 325 /* 326 * attach the wsmouse 327 */ 328 sc->sc_wsmousedev = config_found(&sc->sc_dev, &wsmaa, wsmousedevprint); 329 330 /* 331 * power management events 332 */ 333 sc->sc_power_hook = powerhook_establish(sc->sc_dev.dv_xname, 334 vrpiu_power, sc); 335 if (sc->sc_power_hook == NULL) 336 aprint_error("%s: WARNING: couldn't establish powerhook\n", 337 sc->sc_dev.dv_xname); 338 339 /* 340 * init A/D port polling. 341 */ 342 sc->sc_battery.n_values = 3; 343 sc->sc_battery.value[0] = -1; 344 sc->sc_battery.value[1] = -1; 345 sc->sc_battery.value[2] = -1; 346 sc->sc_battery.nextpoll = hz*vrpiu_ad_poll_interval; 347 callout_init(&sc->sc_adpoll); 348 callout_reset(&sc->sc_adpoll, hz, vrpiu_start_powerstate, sc); 349} 350 351/* 352 * calculate interval value 353 * input: WSMOUSE_RES_MIN - WSMOUSE_RES_MAX 354 * output: value for PIUSIVL_REG 355 */ 356static u_int 357scan_interval(u_int data) 358{ 359 int scale; 360 361 if (data < WSMOUSE_RES_MIN) 362 data = WSMOUSE_RES_MIN; 363 364 if (WSMOUSE_RES_MAX < data) 365 data = WSMOUSE_RES_MAX; 366 367 scale = WSMOUSE_RES_MAX - WSMOUSE_RES_MIN; 368 data += WSMOUSE_RES_MIN; 369 370 return PIUSIVL_SCANINTVAL_MIN + 371 (PIUSIVL_SCANINTVAL_MAX - PIUSIVL_SCANINTVAL_MIN) * 372 (scale - data) / scale; 373} 374 375int 376vrpiu_ad_enable(void *v) 377{ 378 struct vrpiu_softc *sc = v; 379 int s; 380 unsigned int cnt; 381 382 DPRINTF(("%s(%d): vrpiu_ad_enable(): interval=0x%03x\n", 383 __FILE__, __LINE__, sc->sc_interval)); 384 if (sc->sc_adstat != VRPIU_AD_STAT_DISABLE) 385 return EBUSY; 386 387 /* supply clock to PIU */ 388 vrip_power(sc->sc_vrip, sc->sc_unit, 1); 389 390 /* set scan interval */ 391 vrpiu_write(sc, PIUSIVL_REG_W, sc->sc_interval); 392 393 s = spltty(); 394 395 /* clear interrupt status */ 396 vrpiu_write(sc, PIUINT_REG_W, AD_INTR); 397 398 /* Disable -> Standby */ 399 cnt = PIUCNT_PIUPWR | 400 PIUCNT_PIUMODE_COORDINATE | 401 PIUCNT_PADATSTART | PIUCNT_PADATSTOP; 402 vrpiu_write(sc, PIUCNT_REG_W, cnt); 403 404 /* Level2 interrupt register setting */ 405 vrip_intr_setmask2(sc->sc_vrip, sc->sc_handler, AD_INTR, 1); 406 407 /* save pen status, touch or release */ 408 cnt = vrpiu_read(sc, PIUCNT_REG_W); 409 410 /* 411 * Enable scan sequencer operation 412 * Standby -> WaitPenTouch 413 */ 414 cnt |= PIUCNT_PIUSEQEN; 415 vrpiu_write(sc, PIUCNT_REG_W, cnt); 416 417 sc->sc_adstat = VRPIU_AD_STAT_ENABLE; 418 419 splx(s); 420 421 return 0; 422} 423 424void 425vrpiu_ad_disable(void *v) 426{ 427 struct vrpiu_softc *sc = v; 428 429 DPRINTF(("%s(%d): vrpiu_ad_disable()\n", __FILE__, __LINE__)); 430 431 /* Set level2 interrupt register to mask interrupts */ 432 vrip_intr_setmask2(sc->sc_vrip, sc->sc_handler, AD_INTR, 0); 433 434 sc->sc_adstat = VRPIU_AD_STAT_DISABLE; 435 436 if (sc->sc_tpstat == VRPIU_TP_STAT_DISABLE){ 437 /* Disable scan sequencer operation and power off */ 438 vrpiu_write(sc, PIUCNT_REG_W, 0); 439 440 /* mask clock to PIU */ 441 vrip_power(sc->sc_vrip, sc->sc_unit, 0); 442 } 443} 444 445int 446vrpiu_tp_enable(void *v) 447{ 448 struct vrpiu_softc *sc = v; 449 int s; 450 unsigned int cnt; 451 452 DPRINTF(("%s(%d): vrpiu_tp_enable(): interval=0x%03x\n", 453 __FILE__, __LINE__, sc->sc_interval)); 454 if (sc->sc_tpstat != VRPIU_TP_STAT_DISABLE) 455 return EBUSY; 456 457 /* supply clock to PIU */ 458 vrip_power(sc->sc_vrip, sc->sc_unit, 1); 459 460 /* set scan interval */ 461 vrpiu_write(sc, PIUSIVL_REG_W, sc->sc_interval); 462 463 s = spltty(); 464 465 /* clear interrupt status */ 466 vrpiu_write(sc, PIUINT_REG_W, TP_INTR); 467 468 /* Disable -> Standby */ 469 cnt = PIUCNT_PIUPWR | 470 PIUCNT_PIUMODE_COORDINATE | 471 PIUCNT_PADATSTART | PIUCNT_PADATSTOP; 472 vrpiu_write(sc, PIUCNT_REG_W, cnt); 473 474 /* Level2 interrupt register setting */ 475 vrip_intr_setmask2(sc->sc_vrip, sc->sc_handler, TP_INTR, 1); 476 477 /* save pen status, touch or release */ 478 cnt = vrpiu_read(sc, PIUCNT_REG_W); 479 480 /* 481 * Enable scan sequencer operation 482 * Standby -> WaitPenTouch 483 */ 484 cnt |= PIUCNT_PIUSEQEN; 485 vrpiu_write(sc, PIUCNT_REG_W, cnt); 486 487 /* transit status DISABLE -> TOUCH or RELEASE */ 488 sc->sc_tpstat = (cnt & PIUCNT_PENSTC) ? 489 VRPIU_TP_STAT_TOUCH : VRPIU_TP_STAT_RELEASE; 490 491 splx(s); 492 493 return 0; 494} 495 496void 497vrpiu_tp_disable(void *v) 498{ 499 struct vrpiu_softc *sc = v; 500 501 DPRINTF(("%s(%d): vrpiu_tp_disable()\n", __FILE__, __LINE__)); 502 503 /* Set level2 interrupt register to mask interrupts */ 504 vrip_intr_setmask2(sc->sc_vrip, sc->sc_handler, TP_INTR, 0); 505 506 sc->sc_tpstat = VRPIU_TP_STAT_DISABLE; 507 508 if (sc->sc_adstat == VRPIU_AD_STAT_DISABLE){ 509 /* Disable scan sequencer operation and power off */ 510 vrpiu_write(sc, PIUCNT_REG_W, 0); 511 512 /* mask clock to PIU */ 513 vrip_power(sc->sc_vrip, sc->sc_unit, 0); 514 } 515} 516 517int 518vrpiu_tp_ioctl(void *v, u_long cmd, caddr_t data, int flag, struct lwp *l) 519{ 520 struct vrpiu_softc *sc = v; 521 522 DPRINTF(("%s(%d): vrpiu_tp_ioctl(%08lx)\n", __FILE__, __LINE__, cmd)); 523 524 switch (cmd) { 525 case WSMOUSEIO_SRES: 526 { 527 int tp_enable; 528 int ad_enable; 529 530 tp_enable = (sc->sc_tpstat != VRPIU_TP_STAT_DISABLE); 531 ad_enable = (sc->sc_adstat != VRPIU_AD_STAT_DISABLE); 532 533 if (tp_enable) 534 vrpiu_tp_disable(sc); 535 if (ad_enable) 536 vrpiu_ad_disable(sc); 537 538 sc->sc_interval = scan_interval(*(u_int *)data); 539 DPRINTF(("%s(%d): WSMOUSEIO_SRES: *data=%d, interval=0x%03x\n", 540 __FILE__, __LINE__, *(u_int *)data, sc->sc_interval)); 541 542 if (sc->sc_interval < PIUSIVL_SCANINTVAL_MIN) 543 sc->sc_interval = PIUSIVL_SCANINTVAL_MIN; 544 545 if (PIUSIVL_SCANINTVAL_MAX < sc->sc_interval) 546 sc->sc_interval = PIUSIVL_SCANINTVAL_MAX; 547 548 if (tp_enable) 549 vrpiu_tp_enable(sc); 550 if (ad_enable) 551 vrpiu_ad_enable(sc); 552 } 553 break; 554 555 default: 556 return hpc_tpanel_ioctl(&sc->sc_tpcalib, cmd, data, flag, l); 557 } 558 return 0; 559} 560 561/* 562 * PIU AD interrupt handler. 563 */ 564void 565vrpiu_ad_intr(struct vrpiu_softc *sc) 566{ 567 unsigned int i; 568 unsigned int intrstat; 569 570 intrstat = vrpiu_read(sc, PIUINT_REG_W); 571 572 if (sc->sc_adstat == VRPIU_AD_STAT_DISABLE) { 573 /* 574 * the device isn't enabled. just clear interrupt. 575 */ 576 vrpiu_write(sc, PIUINT_REG_W, AD_INTR); 577 return; 578 } 579 580 if (intrstat & PIUINT_PADADPINTR) { 581 sc->sc_battery.value[0] = (unsigned int) 582 vrpiu_buf_read(sc, PIUAB(0)); 583 sc->sc_battery.value[1] = (unsigned int) 584 vrpiu_buf_read(sc, PIUAB(1)); 585 sc->sc_battery.value[2] = (unsigned int) 586 vrpiu_buf_read(sc, PIUAB(2)); 587 } 588 589 if (intrstat & PIUINT_PADADPINTR) { 590 for (i = 0; i < 3; i++) { 591 if (sc->sc_battery.value[i] & PIUAB_VALID) 592 sc->sc_battery.value[i] &= 593 sc->sc_ab_paddata_mask; 594 else 595 sc->sc_battery.value[i] = 0; 596 } 597 vrpiu_calc_powerstate(sc); 598 } 599 vrpiu_write(sc, PIUINT_REG_W, AD_INTR); 600 601 return; 602} 603/* 604 * PIU TP interrupt handler. 605 */ 606void 607vrpiu_tp_intr(struct vrpiu_softc *sc) 608{ 609 unsigned int cnt, i; 610 unsigned int intrstat, page; 611 int tpx0, tpx1, tpy0, tpy1; 612 int x, y, xraw, yraw; 613 614 tpx0 = tpx1 = tpy0 = tpy1 = 0; /* XXX: gcc -Wuninitialized */ 615 616 intrstat = vrpiu_read(sc, PIUINT_REG_W); 617 618 if (sc->sc_tpstat == VRPIU_TP_STAT_DISABLE) { 619 /* 620 * the device isn't enabled. just clear interrupt. 621 */ 622 vrpiu_write(sc, PIUINT_REG_W, intrstat & TP_INTR); 623 return; 624 } 625 626 page = (intrstat & PIUINT_OVP) ? 1 : 0; 627 if (intrstat & (PIUINT_PADPAGE0INTR | PIUINT_PADPAGE1INTR)) { 628 tpx0 = vrpiu_buf_read(sc, PIUPB(page, 0)); 629 tpx1 = vrpiu_buf_read(sc, PIUPB(page, 1)); 630 tpy0 = vrpiu_buf_read(sc, PIUPB(page, 2)); 631 tpy1 = vrpiu_buf_read(sc, PIUPB(page, 3)); 632 } 633 634 if (intrstat & PIUINT_PADDLOSTINTR) { 635 page = page ? 0 : 1; 636 for (i = 0; i < 4; i++) 637 vrpiu_buf_read(sc, PIUPB(page, i)); 638 } 639 640 cnt = vrpiu_read(sc, PIUCNT_REG_W); 641#ifdef DEBUG 642 if (vrpiu_debug) 643 vrpiu_dump_cntreg(cnt); 644#endif 645 646 /* clear interrupt status */ 647 vrpiu_write(sc, PIUINT_REG_W, intrstat & TP_INTR); 648 649#if 0 650 DPRINTF(("vrpiu_intr: OVP=%d", page)); 651 if (intrstat & PIUINT_PADCMDINTR) 652 DPRINTF((" CMD")); 653 if (intrstat & PIUINT_PADADPINTR) 654 DPRINTF((" A/D")); 655 if (intrstat & PIUINT_PADPAGE1INTR) 656 DPRINTF((" PAGE1")); 657 if (intrstat & PIUINT_PADPAGE0INTR) 658 DPRINTF((" PAGE0")); 659 if (intrstat & PIUINT_PADDLOSTINTR) 660 DPRINTF((" DLOST")); 661 if (intrstat & PIUINT_PENCHGINTR) 662 DPRINTF((" PENCHG")); 663 DPRINTF(("\n")); 664#endif 665 if (intrstat & (PIUINT_PADPAGE0INTR | PIUINT_PADPAGE1INTR)) { 666 /* 667 * just ignore scan data if status isn't Touch. 668 */ 669 if (sc->sc_tpstat == VRPIU_TP_STAT_TOUCH) { 670 /* reset tp scan timeout */ 671 callout_reset(&sc->sc_tptimeout, VRPIU_TP_SCAN_TIMEOUT, 672 vrpiu_tp_timeout, sc); 673 674 if (!((tpx0 & PIUPB_VALID) && (tpx1 & PIUPB_VALID) && 675 (tpy0 & PIUPB_VALID) && (tpy1 & PIUPB_VALID))) { 676 printf("vrpiu: internal error," 677 " data is not valid!\n"); 678 } else { 679 tpx0 &= sc->sc_pb_paddata_mask; 680 tpx1 &= sc->sc_pb_paddata_mask; 681 tpy0 &= sc->sc_pb_paddata_mask; 682 tpy1 &= sc->sc_pb_paddata_mask; 683#define ISVALID(n, c) ((c) - (c)/5 < (n) && (n) < (c) + (c)/5) 684 if (ISVALID(tpx0 + tpx1, sc->sc_pb_paddata_max) && 685 ISVALID(tpy0 + tpy1, sc->sc_pb_paddata_max)) { 686#if 0 687 DPRINTF(("%04x %04x %04x %04x\n", 688 tpx0, tpx1, tpy0, tpy1)); 689 DPRINTF(("%3d %3d (%4d %4d)->", tpx0, 690 tpy0, tpx0 + tpx1, tpy0 + tpy1)); 691#endif 692 xraw = tpy1 * sc->sc_pb_paddata_max / (tpy0 + tpy1); 693 yraw = tpx1 * sc->sc_pb_paddata_max / (tpx0 + tpx1); 694 DPRINTF(("%3d %3d", xraw, yraw)); 695 696 tpcalib_trans(&sc->sc_tpcalib, xraw, 697 yraw, &x, &y); 698 699 DPRINTF(("->%4d %4d", x, y)); 700 wsmouse_input(sc->sc_wsmousedev, 701 1, /* button 0 down */ 702 x, /* x */ 703 y, /* y */ 704 0, /* z */ 705 WSMOUSE_INPUT_ABSOLUTE_X | 706 WSMOUSE_INPUT_ABSOLUTE_Y); 707 DPRINTF(("\n")); 708 } 709 } 710 } 711 } 712 713 if (cnt & PIUCNT_PENSTC) { 714 if (sc->sc_tpstat == VRPIU_TP_STAT_RELEASE) { 715 /* 716 * pen touch 717 */ 718 DPRINTF(("PEN TOUCH\n")); 719 sc->sc_tpstat = VRPIU_TP_STAT_TOUCH; 720 /* 721 * We should not report button down event while 722 * we don't know where it occur. 723 */ 724 725 /* set tp scan timeout */ 726 callout_reset(&sc->sc_tptimeout, VRPIU_TP_SCAN_TIMEOUT, 727 vrpiu_tp_timeout, sc); 728 } 729 } else { 730 vrpiu_tp_up(sc); 731 } 732 733 if (intrstat & PIUINT_PADDLOSTINTR) { 734 cnt |= PIUCNT_PIUSEQEN; 735 vrpiu_write(sc, PIUCNT_REG_W, cnt); 736 } 737 738 return; 739} 740 741void 742vrpiu_tp_up(struct vrpiu_softc *sc) 743{ 744 if (sc->sc_tpstat == VRPIU_TP_STAT_TOUCH) { 745 /* 746 * pen release 747 */ 748 DPRINTF(("RELEASE\n")); 749 sc->sc_tpstat = VRPIU_TP_STAT_RELEASE; 750 751 /* clear tp scan timeout */ 752 callout_stop(&sc->sc_tptimeout); 753 754 /* button 0 UP */ 755 wsmouse_input(sc->sc_wsmousedev, 0, 0, 0, 0, 0); 756 } 757} 758 759/* touch panel timeout handler */ 760void 761vrpiu_tp_timeout(void *v) 762{ 763 struct vrpiu_softc *sc = (struct vrpiu_softc *)v; 764 765#ifdef VRPIUDEBUG 766 { 767 unsigned int cnt = vrpiu_read(sc, PIUCNT_REG_W); 768 DPRINTF(("TIMEOUT: stat=%s reg=%s\n", 769 (sc->sc_tpstat == VRPIU_TP_STAT_TOUCH)?"touch":"release", 770 (cnt & PIUCNT_PENSTC)?"touch":"release")); 771 } 772#endif 773 vrpiu_tp_up(sc); 774} 775 776/* 777 * PIU interrupt handler. 778 */ 779int 780vrpiu_intr(void *arg) 781{ 782 struct vrpiu_softc *sc = arg; 783 784 vrpiu_ad_intr(sc); 785 vrpiu_tp_intr(sc); 786 787 return 0; 788} 789 790void 791vrpiu_start_powerstate(void *v) 792{ 793 int mask; 794 struct vrpiu_softc *sc = (struct vrpiu_softc *)v; 795 796 vrpiu_ad_enable(sc); 797 mask = vrpiu_read(sc, PIUAMSK_REG_W); 798 mask &= 0xff8f; /* XXX */ 799 vrpiu_write(sc, PIUAMSK_REG_W, mask); 800 vrpiu_write(sc, PIUASCN_REG_W, PIUACN_ADPSSTART); 801 /* 802 * restart next A/D polling 803 */ 804 callout_reset(&sc->sc_adpoll, hz*vrpiu_ad_poll_interval, 805 vrpiu_start_powerstate, sc); 806} 807 808void 809vrpiu_calc_powerstate(struct vrpiu_softc *sc) 810{ 811 extern void vrgiu_diff_io(void); 812 vrpiu_ad_disable(sc); 813 VPRINTF(("vrpiu:AD: %d, %d, %d\n", 814 sc->sc_battery.value[0], 815 sc->sc_battery.value[1], 816 sc->sc_battery.value[2])); 817 sc->sc_battery.nextpoll = hz*vrpiu_ad_poll_interval; 818 vrpiu_send_battery_event(sc); 819 /* 820 * restart next A/D polling if change polling timming. 821 */ 822 if (sc->sc_battery.nextpoll != hz*vrpiu_ad_poll_interval) 823 callout_reset(&sc->sc_adpoll, sc->sc_battery.nextpoll, 824 vrpiu_start_powerstate, sc); 825 if (bootverbose) 826 vrgiu_diff_io(); 827 828} 829 830static void 831vrpiu_power(int why, void *arg) 832{ 833 struct vrpiu_softc *sc = arg; 834 835 switch (why) { 836 case PWR_STANDBY: 837 case PWR_SUSPEND: 838 break; 839 case PWR_RESUME: 840 callout_reset(&sc->sc_adpoll, hz, 841 vrpiu_start_powerstate, sc); 842 break; 843 } 844} 845 846static void 847vrpiu_send_battery_event(struct vrpiu_softc *sc) 848{ 849#ifdef VRPIU_ADHOC_BATTERY_EVENT 850 static int batteryhigh = 0; 851 static int batterylow = 0; 852 static int critical = 0; 853 854 if (sc->sc_battery_spec == NULL 855 || sc->sc_battery_spec->main_port == -1) 856 return; 857 858 if (sc->sc_battery.value[sc->sc_battery_spec->main_port] 859 <= sc->sc_battery_spec->dc_critical) { 860 batteryhigh = 0; 861 config_hook_call(CONFIG_HOOK_PMEVENT, 862 CONFIG_HOOK_PMEVENT_BATTERY, 863 (void *)CONFIG_HOOK_BATT_CRITICAL); 864 batterylow = 3; 865 if (critical) { 866 config_hook_call(CONFIG_HOOK_PMEVENT, 867 CONFIG_HOOK_PMEVENT_SUSPENDREQ, 868 (void *)0); 869 critical = 0; 870 batterylow = 0; 871 } 872 critical++; 873 } else if (sc->sc_battery.value[sc->sc_battery_spec->main_port] 874 <= sc->sc_battery_spec->dc_20p) { 875 batteryhigh = 0; 876 if (batterylow == 1) 877 config_hook_call(CONFIG_HOOK_PMEVENT, 878 CONFIG_HOOK_PMEVENT_BATTERY, 879 (void *)CONFIG_HOOK_BATT_20P); 880 config_hook_call(CONFIG_HOOK_PMEVENT, 881 CONFIG_HOOK_PMEVENT_BATTERY, 882 (void *)CONFIG_HOOK_BATT_LOW); 883 batterylow = 2; 884 } else if (sc->sc_battery.value[sc->sc_battery_spec->main_port] 885 <= sc->sc_battery_spec->dc_50p) { 886 batteryhigh = 0; 887 if (batterylow == 0) { 888 batterylow = 1; 889 config_hook_call(CONFIG_HOOK_PMEVENT, 890 CONFIG_HOOK_PMEVENT_BATTERY, 891 (void *)CONFIG_HOOK_BATT_50P); 892 } 893 } else if (sc->sc_battery.value[sc->sc_battery_spec->main_port] 894 >= sc->sc_battery_spec->ac_80p) { 895 batterylow = 0; 896 if (batteryhigh == 0) { 897 batteryhigh = 1; 898 config_hook_call(CONFIG_HOOK_PMEVENT, 899 CONFIG_HOOK_PMEVENT_BATTERY, 900 (void *)CONFIG_HOOK_BATT_80P); 901 config_hook_call(CONFIG_HOOK_PMEVENT, 902 CONFIG_HOOK_PMEVENT_BATTERY, 903 (void *)CONFIG_HOOK_BATT_HIGH); 904 } 905 } 906#else /* VRPIU_ADHOC_BATTERY_EVENT */ 907 config_hook_call(CONFIG_HOOK_SET, 908 CONFIG_HOOK_BATTERYVAL, 909 (void *)&sc->sc_battery); 910#endif /* VRPIU_ADHOC_BATTERY_EVENT */ 911} 912 913#ifdef DEBUG 914void 915vrpiu_dump_cntreg(unsigned int cnt) 916{ 917 printf("%s", (cnt & PIUCNT_PENSTC) ? "Touch" : "Release"); 918 printf(" state="); 919 if ((cnt & PIUCNT_PADSTATE_MASK) == PIUCNT_PADSTATE_CmdScan) 920 printf("CmdScan"); 921 if ((cnt & PIUCNT_PADSTATE_MASK) == PIUCNT_PADSTATE_IntervalNextScan) 922 printf("IntervalNextScan"); 923 if ((cnt & PIUCNT_PADSTATE_MASK) == PIUCNT_PADSTATE_PenDataScan) 924 printf("PenDataScan"); 925 if ((cnt & PIUCNT_PADSTATE_MASK) == PIUCNT_PADSTATE_WaitPenTouch) 926 printf("WaitPenTouch"); 927 if ((cnt & PIUCNT_PADSTATE_MASK) == PIUCNT_PADSTATE_RFU) 928 printf("???"); 929 if ((cnt & PIUCNT_PADSTATE_MASK) == PIUCNT_PADSTATE_ADPortScan) 930 printf("ADPortScan"); 931 if ((cnt & PIUCNT_PADSTATE_MASK) == PIUCNT_PADSTATE_Standby) 932 printf("Standby"); 933 if ((cnt & PIUCNT_PADSTATE_MASK) == PIUCNT_PADSTATE_Disable) 934 printf("Disable"); 935 if (cnt & PIUCNT_PADATSTOP) 936 printf(" AutoStop"); 937 if (cnt & PIUCNT_PADATSTART) 938 printf(" AutoStart"); 939 if (cnt & PIUCNT_PADSCANSTOP) 940 printf(" Stop"); 941 if (cnt & PIUCNT_PADSCANSTART) 942 printf(" Start"); 943 if (cnt & PIUCNT_PADSCANTYPE) 944 printf(" ScanPressure"); 945 if ((cnt & PIUCNT_PIUMODE_MASK) == PIUCNT_PIUMODE_ADCONVERTER) 946 printf(" A/D"); 947 if ((cnt & PIUCNT_PIUMODE_MASK) == PIUCNT_PIUMODE_COORDINATE) 948 printf(" Coordinate"); 949 if (cnt & PIUCNT_PIUSEQEN) 950 printf(" SeqEn"); 951 if ((cnt & PIUCNT_PIUPWR) == 0) 952 printf(" PowerOff"); 953 if ((cnt & PIUCNT_PADRST) == 0) 954 printf(" Reset"); 955 printf("\n"); 956} 957#endif 958