1/* $NetBSD: wzero3_reg.h,v 1.6 2010/05/30 10:00:27 nonaka Exp $ */ 2 3/*- 4 * Copyright (C) 2008, 2009, 2010 NONAKA Kimihiro <nonaka@netbsd.org> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 22 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 23 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 26 */ 27 28#ifndef _HPCARM_DEV_WZERO3_REG_H_ 29#define _HPCARM_DEV_WZERO3_REG_H_ 30 31/* GPIO --------------------------------------------------------------------- */ 32 33/* 34 * WS003SH/WS004SH specific parameter 35 */ 36#define GPIO_WS003SH_SD_DETECT 9 /* In */ 37#define GPIO_WS003SH_TOUCH_PANEL 11 /* In */ 38#define GPIO_WS003SH_SLIDE 12 /* In */ 39#define GPIO_WS003SH_FULLKEY_LED 17 /* Out: H:ON, L:OFF */ 40#define GPIO_WS003SH_ANTENNA_LED 37 /* Out: H:ON, L:OFF */ 41#define GPIO_WS003SH_MAX1233_CS 48 /* Out */ 42#define GPIO_WS003SH_RESET 89 /* Out */ 43#define GPIO_WS003SH_POWER_BUTTON 95 /* In */ 44#define GPIO_WS003SH_VIB 97 /* Out */ 45#define GPIO_WS003SH_USB_CLIENT_DETECT 103 /* In */ 46#define GPIO_WS003SH_SD_POWER 107 /* Out: H:ON, L:OFF */ 47#define GPIO_WS003SH_CHARGE 114 /* Out: H:ON, L:OFF */ 48#define GPIO_WS003SH_AC_DETECT 115 /* In */ 49 50/* WS003SH: GPIO OUT pin 51 * CLR: 10,16,18,19,20,21,23,33,40,56,87,90,91,104,119,120 52 * SET: 39,54,57 53 */ 54 55/* 56 * WS007SH specific parameter 57 */ 58#define GPIO_WS007SH_RESET_BUTTON 1 /* In: L: press, H: release */ 59#define GPIO_WS007SH_POWER_BUTTON 9 /* In */ 60#define GPIO_WS007SH_TOUCH_PANEL 21 /* In */ 61#define GPIO_WS007SH_ADS7846_CS 33 /* Out */ 62#define GPIO_WS007SH_USB_CLIENT_DETECT 35 /* In */ 63#define GPIO_WS007SH_USB_HOST_POWER 37 /* Out */ 64#define GPIO_WS007SH_USB_HOST_DETECT 41 /* In */ 65#define GPIO_WS007SH_SD_DETECT 48 /* In */ 66#define GPIO_WS007SH_HSYNC 75 /* In */ 67#define GPIO_WS007SH_SLIDE 104 /* In */ 68#define GPIO_WS007SH_SD_POWER 107 /* Out: H:ON, L:OFF */ 69 70/* 71 * WS011SH specific parameter 72 */ 73/* 74port I/O(Active) name desc 751 I(?) RESET_BTN button detect: reset (on: release, off:press) 769 I(?) PWR_BTN button detect: power-on (on: press, off:release) 7721 I(?) TPANEL touch panel (on: release, off: press) 7837 O USBH_PWR USB Host power (H: enable, L: disable) 7941 I(L) USBH_DET USB Host cable detect (on: remove, off: insert) 8048 I(L) SD_DET microSD card detect (on: remove, off: insert) 8151 I(?) SLIDE LCD slider (on: open, off: close) 8252 I(?) KEYLOCK key lock slider (on: unlock, off:lock) 8357 I(?) EXCRWAL_DET 8481 I(L) EPDET earphone adapter detect (on: remove, off: insert) 8591 I(?) FULLKEYBOARD? 8696 I(?) JACKET_DET jacket detect (on: close, off: open) 87?105 I(?) WSIM_DET W-SIM detect (on: insert, off: remove) 88?106 I(?) WSIM? (same as GPIO#105?) 89107 O(?) SD_PWR: SD Card power (on: on, off: off) 90115 I(H) ACDET AC adapter detect (on: insert, off: remove) 91116 I(?) USBC_DET USB Client cable detect (on: insert, off: remove) 92 */ 93#define GPIO_WS011SH_RESET_BUTTON 1 /* In */ 94#define GPIO_WS011SH_POWER_BUTTON 9 /* In */ 95#define GPIO_WS011SH_KEYPAD 14 /* In */ 96#define GPIO_WS011SH_TOUCH_PANEL 21 /* In */ 97#define GPIO_WS011SH_AK4184_CS 33 /* Out */ 98#define GPIO_WS011SH_USB_HOST_POWER 37 /* Out */ 99#define GPIO_WS011SH_USB_HOST_DETECT 41 /* In */ 100#define GPIO_WS011SH_SD_DETECT 48 /* In */ 101#define GPIO_WS011SH_SLIDE 51 /* In */ 102#define GPIO_WS011SH_KEY_LOCK 52 /* In */ 103#define GPIO_WS011SH_HSYNC 75 /* In */ 104#define GPIO_WS011SH_SD_POWER 107 /* Out */ 105#define GPIO_WS011SH_USB_CLIENT_DETECT 116 /* In */ 106 107/* 108 * WS020SH specific parameter 109 */ 110#define GPIO_WS020SH_RESET_BUTTON 1 /* In */ 111#define GPIO_WS020SH_TOUCH_PANEL 21 /* In */ 112#define GPIO_WS020SH_USB_HOST_DETECT 41 /* In */ 113#define GPIO_WS020SH_SD_DETECT 48 /* In */ 114#define GPIO_WS020SH_SLIDE 51 /* In */ 115#define GPIO_WS020SH_KEY_LOCK 52 /* In */ 116#define GPIO_WS020SH_POWER_BUTTON 55 /* In */ 117#define GPIO_WS020SH_SD_POWER 107 /* Out */ 118#define GPIO_WS020SH_USB_CLIENT_DETECT 116 /* In */ 119 120#endif /* _HPCARM_DEV_WZERO3_REG_H_ */ 121