LOONGSON revision 1.7
1# $NetBSD: LOONGSON,v 1.7 2011/11/22 21:25:11 tls Exp $ 2# 3# LOONGSON machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21include "arch/evbmips/conf/std.loongson" 22 23options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25#ident "GDIUM-$Revision: 1.7 $" 26 27maxusers 16 28 29# Standard system options 30options DDB # in-kernel debugger 31#options DDB_ONPANIC=0 # don't enter debugger on panic 32options DDB_HISTORY_SIZE=512 # enable history editing in DDB 33#options KGDB # remote debugger 34options DIAGNOSTIC # extra kernel debugging checks 35#options DEBUG # extra kernel debugging support 36#options PMAP_FAULTINFO 37#options LOCKDEBUG 38makeoptions DEBUG="-g" 39options KTRACE # system call tracing support 40options MSGBUFSIZE=8192 # dmesg buffer size 41 42## UVM options. 43#options UVM_PAGE_TRKOWN 44#options UVMHIST 45#options UVMHIST_PRINT # Loud! 46 47#options SCSIVERBOSE # human readable SCSI error messages 48#options PCMCIAVERBOSE # verbose PCMCIA configuration messages 49#options PCMCIADEBUG 50#options PCMCIACISDEBUG 51 52#options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT 53#options RTC_OFFSET=-540 # JST-9 54#options RTC_OFFSET=480 # PST8 55 # In NO RTC_OFFSET , inherit RTC_OFFSET 56 # from Windows CE. 57options NTP # network time protocol 58 59#options WINCE_DEFAULT_SETTING # Debugging use 60 61#options SYSCALL_DEBUG # for debug 62#options HPCMIPS_L1CACHE_DISABLE # disable L1 cache for debug 63options USERCONF # userconf(4) support 64#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 65options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 66 67# Filesystem options 68file-system FFS # fast filesystem with user and group quotas 69file-system MFS # memory-based filesystem 70file-system NFS # Sun NFS-compatible filesystem (client) 71file-system EXT2FS # second extended file system (linux) 72#file-system LFS # Log-based filesystem (still experimental) 73file-system CD9660 # ISO 9660 + Rock Ridge file system 74file-system MSDOSFS # MS-DOS file system 75#file-system FDESC # /dev/fd 76file-system KERNFS # /kern (kernel informational filesystem) 77#file-system NULLFS # loopback file system 78#file-system OVERLAY # overlay file system 79file-system PROCFS # /proc 80#file-system UMAPFS # NULLFS + uid and gid remapping 81file-system UNION 82file-system PTYFS # /dev/pts/N support 83#file-system TMPFS # Efficient memory file-system 84#file-system UDF # experimental - OSTA UDF CD/DVD file-system 85 86options NFSSERVER # Sun NFS-compatible filesystem (server) 87options WAPBL # File system journaling support - Experimental 88#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 89#options QUOTA # legacy UFS quotas 90#options QUOTA2 # new, in-filesystem UFS quotas 91#options FFS_NO_SNAPSHOT # No FFS snapshot support 92 93# Networking options 94#options GATEWAY # IP packet forwarding 95options INET # IP + ICMP + TCP + UDP 96options INET6 # IPV6 97#options IPSEC # IP security 98#options IPSEC_ESP # IP security (encryption part; define w/ IPSEC) 99#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 100#options IPSEC_DEBUG # debug for IP security 101#options MROUTING # Multicast routing support 102#options PIM # Protocol Independent Multicast 103#options ISO # OSI networking 104#options TPIP # TPIP 105#options EON # OSI tunneling over IP 106options PFIL_HOOKS # pfil(9) packet filter hooks 107options IPFILTER_LOG # ipmon(8) log support 108options IPFILTER_LOOKUP # ippool(8) support 109options IPFILTER_COMPAT # Compat for IP-Filter 110#options IPFILTER_DEFAULT_BLOCK # block all packets by default 111 112#options ALTQ # Manipulate network interfaces' output queues 113#options ALTQ_BLUE # Stochastic Fair Blue 114#options ALTQ_CBQ # Class-Based Queueing 115#options ALTQ_CDNR # Diffserv Traffic Conditioner 116#options ALTQ_FIFOQ # First-In First-Out Queue 117#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 118#options ALTQ_HFSC # Hierarchical Fair Service Curve 119#options ALTQ_LOCALQ # Local queueing discipline 120#options ALTQ_PRIQ # Priority Queueing 121#options ALTQ_RED # Random Early Detection 122#options ALTQ_RIO # RED with IN/OUT 123#options ALTQ_WFQ # Weighted Fair Queueing 124 125# NetBSD backwards compatibility 126options COMPAT_43 127options COMPAT_16 128options COMPAT_20 129options COMPAT_30 # NetBSD 3.0 compatibility. 130options COMPAT_40 # NetBSD 4.0 compatibility. 131options COMPAT_50 # NetBSD 5.0 compatibility. 132options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 133 134 135#options NFS_BOOT_DHCP 136options NFS_BOOT_BOOTP 137#options NFS_BOOT_BOOTPARAM 138 139# compile options 140#makeoptions DEFGP="-G 10" 141 142config netbsd root on ? type ? 143 144# WS console uses SUN or VT100 terminal emulation 145options WSEMUL_VT100 146options WS_KERNEL_FG=WSCOL_GREEN 147#options WSDISPLAY_DEFAULTSCREENS=4 148options FONT_GALLANT12x22 149# compatibility to other console drivers 150options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 151# 152# Hpckbd will set key board layout appropriately. You can use option 153# 'PCKBD_LAYOUT' to overrite the default layout. 154# 155#options PCKBD_LAYOUT="(KB_US | KB_SWAPCTRLCAPS | KB_MACHDEP)" 156 157mainbus0 at root 158cpu0 at mainbus0 159bonito0 at mainbus0 160pci0 at bonito0 161sisfb0 at pci0 dev ? function ? 162voyager0 at pci0 dev ? function ? # SM502 on GDIUM 163voyagerfb0 at voyager0 # framebuffer portion 164iic* at voyager0 165strtc* at iic? addr 0x68 # GDIUM's real time clock 166options STRTC_NO_USERRAM 167lmtemp* at iic? addr 0x48 # GDIUM's temperature sensor 168stvii* at iic? addr 0x40 # GDIUM's onboard microcontroller 169#genfb0 at pci0 dev ? function ? 170wsdisplay* at wsemuldisplaydev? 171ehci* at pci0 dev ? function ? 172#options EHCI_DEBUG 173ohci* at pci0 dev ? function ? 174#options OHCI_DEBUG, USB_DEBUG, UHUB_DEBUG 175 176gcscpcib* at pci? dev ? function ? # AMD CS5535/CS5536 PCI-ISA w/ 177gpio* at gcscpcib? # timecounter, watchdog and GPIO 178isa0 at gcscpcib? 179 180pcib* at pci? 181isa0 at pcib? 182 183mcclock* at isa? port 0x70 # mc146818-compatible 184com0 at isa? port 0x2f8 irq 3 # Fuloong 2F only 185com1 at isa? port 0x3f8 irq 4 # Fuloong 2F only (IR port) 186 187pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver 188viaide* at pci? dev ? function ? # VIA/AMD/Nvidia IDE controllers 189options WDC_NO_IDS #workaround CS5536+JMH330 interrupt disable bug 190 191# ATA (IDE) bus support 192atabus* at ata? 193options ATADEBUG 194 195# IDE drives 196# Flags are used only with controllers that support DMA operations 197# and mode settings (e.g. some pciide controllers) 198# The lowest order four bits (rightmost digit) of the flags define the PIO 199# mode to use, the next set of four bits the DMA mode and the third set the 200# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode 201# to use, and the last bit must be 1 for this setting to be used. 202# For DMA and UDMA, 0xf (1111) means 'disable'. 203# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. 204# (0xc=1100, 0xa=1010, 0xf=1111) 205# 0x0000 means "use whatever the drive claims to support". 206wd* at atabus? drive ? flags 0x0000 207 208# ATAPI bus support 209#atapibus* at atapi? 210 211# ATAPI devices 212# flags have the same meaning as for IDE drives. 213#cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives 214#sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives 215#st* at atapibus? drive ? flags 0x0000 # ATAPI tape drives 216#uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown 217 218ral* at pci? dev ? function ? # RL2561S 802.11b/g 219rtk* at pci? dev ? function ? # RTL8139 100/10 Ethernet 220re* at pci? dev ? function ? # Realtek 8139C+/8169/8169S/8110S 221# MII/PHY support 222rgephy* at mii? phy ? # Realtek 8169S/8110S internal PHYs 223rlphy* at mii? phy ? # Realtek 8139/8201L PHYs 224ukphy* at mii? phy ? # generic unknown PHYs 225 226# USB Hubs 227usb* at ehci? 228usb* at ohci? 229uhub* at usb? 230uhub* at uhub? port ? 231 232# USB HID device 233uhidev* at uhub? port ? configuration ? interface ? 234 235# USB Mice 236ums* at uhidev? reportid ? 237wsmouse* at ums? mux 0 238 239# USB Keyboards 240ukbd* at uhidev? reportid ? 241wskbd* at ukbd? console ? mux 1 242options GDIUM_KEYBOARD_HACK # support Fn key on Gdium 243 244# USB Generic HID devices 245uhid* at uhidev? reportid ? 246 247# USB serial adapter 248uftdi* at uhub? port ? configuration ? 249 250# USB Printer 251ulpt* at uhub? port ? configuration ? interface ? 252 253# USB Modem 254umodem* at uhub? port ? configuration ? 255ucom* at umodem? 256 257# Option N.V. Wireless WAN modems 258uhso* at uhub? port ? configuration ? 259 260# USB Mass Storage 261umass* at uhub? port ? configuration ? interface ? 262scsibus* at umass? channel ? 263sd* at scsibus? target ? lun ? # SCSI disk drives 264cd* at scsibus? target ? lun ? # SCSI CD-ROM drives 265 266# FTDI FT8U100AX serial adapter 267uftdi* at uhub? port ? 268ucom* at uftdi? portno ? 269 270uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter 271ucom* at uplcom? portno ? 272 273umct* at uhub? port ? # MCT USB-RS232 serial adapter 274ucom* at umct? portno ? 275 276# USB Generic driver 277ugen* at uhub? port ? 278 279# 280# accept filters 281pseudo-device accf_data # "dataready" accept filter 282pseudo-device accf_http # "httpready" accept filter 283 284pseudo-device loop 1 # network loopback 285pseudo-device ppp # serial-line IP ports 286pseudo-device pppoe # PPP over Ethernet (RFC 2516) 287pseudo-device pty # pseudo-terminals 288pseudo-device bpfilter # packet filter ports 289#pseudo-device carp # Common Address Redundancy Protocol 290pseudo-device ipfilter # IP filter, NAT 291 292pseudo-device vnd # virtual disk ick 293#options VND_COMPRESSION # compressed vnd(4) 294#pseudo-device ccd 4 # concatenated disks 295pseudo-device fss # file system snapshot device 296#pseudo-device cgd 4 # cryptographic disks 297pseudo-device clockctl # user control of clock subsystem 298 299pseudo-device wsmux # mouse & keyboard multiplexor 300#pseudo-device md # memory disk device (ramdisk) 301 302#pseudo-device raid 8 # RAIDframe disk driver 303#options RAID_AUTOCONFIG # auto-configuration of RAID components 304# Options to enable various other RAIDframe RAID types. 305# options RF_INCLUDE_EVENODD=1 306# options RF_INCLUDE_RAID5_RS=1 307# options RF_INCLUDE_PARITYLOGGING=1 308# options RF_INCLUDE_CHAINDECLUSTER=1 309# options RF_INCLUDE_INTERDECLUSTER=1 310# options RF_INCLUDE_PARITY_DECLUSTERING=1 311# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 312 313# for IPv6 314pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 315#pseudo-device faith # IPv[46] tcp relay translation i/f 316pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 317 318## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 319pseudo-device vlan 320 321## Simple inter-network traffic bridging 322pseudo-device bridge 323#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 324pseudo-device agr # IEEE 802.3ad link aggregation 325pseudo-device ksyms # /dev/ksyms 326#pseudo-device pf # PF packet filter 327#pseudo-device pflog # PF log if 328 329# Veriexec 330# 331# a pseudo device needed for veriexec 332#pseudo-device veriexec 1 333# 334# Uncomment the fingerprint methods below that are desired. Note that 335# removing fingerprint methods will have almost no impact on the kernel 336# code size. 337# 338#options VERIFIED_EXEC_FP_RMD160 339#options VERIFIED_EXEC_FP_SHA256 340#options VERIFIED_EXEC_FP_SHA384 341#options VERIFIED_EXEC_FP_SHA512 342#options VERIFIED_EXEC_FP_SHA1 343#options VERIFIED_EXEC_FP_MD5 344