LOONGSON revision 1.4
1# $NetBSD: LOONGSON,v 1.4 2011/08/31 16:58:10 macallan Exp $ 2# 3# LOONGSON machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21include "arch/evbmips/conf/std.loongson" 22 23options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25#ident "GDIUM-$Revision: 1.4 $" 26 27maxusers 16 28 29# Standard system options 30options DDB # in-kernel debugger 31#options DDB_ONPANIC=0 # don't enter debugger on panic 32options DDB_HISTORY_SIZE=512 # enable history editing in DDB 33#options KGDB # remote debugger 34options DIAGNOSTIC # extra kernel debugging checks 35#options DEBUG # extra kernel debugging support 36#options PMAP_FAULTINFO 37#options LOCKDEBUG 38makeoptions DEBUG="-g" 39options KTRACE # system call tracing support 40options MSGBUFSIZE=8192 # dmesg buffer size 41 42## UVM options. 43#options UVM_PAGE_TRKOWN 44#options UVMHIST 45#options UVMHIST_PRINT # Loud! 46 47#options SCSIVERBOSE # human readable SCSI error messages 48#options PCMCIAVERBOSE # verbose PCMCIA configuration messages 49#options PCMCIADEBUG 50#options PCMCIACISDEBUG 51 52#options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT 53#options RTC_OFFSET=-540 # JST-9 54#options RTC_OFFSET=480 # PST8 55 # In NO RTC_OFFSET , inherit RTC_OFFSET 56 # from Windows CE. 57options NTP # network time protocol 58 59#options WINCE_DEFAULT_SETTING # Debugging use 60 61#options SYSCALL_DEBUG # for debug 62#options HPCMIPS_L1CACHE_DISABLE # disable L1 cache for debug 63options USERCONF # userconf(4) support 64#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 65options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 66 67# Filesystem options 68file-system FFS # fast filesystem with user and group quotas 69file-system MFS # memory-based filesystem 70file-system NFS # Sun NFS-compatible filesystem (client) 71file-system EXT2FS # second extended file system (linux) 72#file-system LFS # Log-based filesystem (still experimental) 73file-system CD9660 # ISO 9660 + Rock Ridge file system 74file-system MSDOSFS # MS-DOS file system 75#file-system FDESC # /dev/fd 76file-system KERNFS # /kern (kernel informational filesystem) 77#file-system NULLFS # loopback file system 78#file-system OVERLAY # overlay file system 79file-system PROCFS # /proc 80#file-system UMAPFS # NULLFS + uid and gid remapping 81file-system UNION 82file-system PTYFS # /dev/pts/N support 83#file-system TMPFS # Efficient memory file-system 84#file-system UDF # experimental - OSTA UDF CD/DVD file-system 85 86options NFSSERVER # Sun NFS-compatible filesystem (server) 87options WAPBL # File system journaling support - Experimental 88#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 89#options QUOTA # legacy UFS quotas 90#options QUOTA2 # new, in-filesystem UFS quotas 91#options FFS_NO_SNAPSHOT # No FFS snapshot support 92 93# Networking options 94#options GATEWAY # IP packet forwarding 95options INET # IP + ICMP + TCP + UDP 96options INET6 # IPV6 97#options IPSEC # IP security 98#options IPSEC_ESP # IP security (encryption part; define w/ IPSEC) 99#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 100#options IPSEC_DEBUG # debug for IP security 101#options MROUTING # Multicast routing support 102#options PIM # Protocol Independent Multicast 103#options ISO # OSI networking 104#options TPIP # TPIP 105#options EON # OSI tunneling over IP 106options PFIL_HOOKS # pfil(9) packet filter hooks 107options IPFILTER_LOG # ipmon(8) log support 108options IPFILTER_LOOKUP # ippool(8) support 109options IPFILTER_COMPAT # Compat for IP-Filter 110#options IPFILTER_DEFAULT_BLOCK # block all packets by default 111 112#options ALTQ # Manipulate network interfaces' output queues 113#options ALTQ_BLUE # Stochastic Fair Blue 114#options ALTQ_CBQ # Class-Based Queueing 115#options ALTQ_CDNR # Diffserv Traffic Conditioner 116#options ALTQ_FIFOQ # First-In First-Out Queue 117#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 118#options ALTQ_HFSC # Hierarchical Fair Service Curve 119#options ALTQ_LOCALQ # Local queueing discipline 120#options ALTQ_PRIQ # Priority Queueing 121#options ALTQ_RED # Random Early Detection 122#options ALTQ_RIO # RED with IN/OUT 123#options ALTQ_WFQ # Weighted Fair Queueing 124 125# NetBSD backwards compatibility 126options COMPAT_43 127options COMPAT_16 128options COMPAT_20 129options COMPAT_30 # NetBSD 3.0 compatibility. 130options COMPAT_40 # NetBSD 4.0 compatibility. 131options COMPAT_50 # NetBSD 5.0 compatibility. 132options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 133 134 135#options NFS_BOOT_DHCP 136options NFS_BOOT_BOOTP 137#options NFS_BOOT_BOOTPARAM 138 139# compile options 140#makeoptions DEFGP="-G 10" 141 142config netbsd root on ? type ? 143 144# WS console uses SUN or VT100 terminal emulation 145options WSEMUL_VT100 146options WS_KERNEL_FG=WSCOL_GREEN 147#options WSDISPLAY_DEFAULTSCREENS=4 148options FONT_GALLANT12x22 149# compatibility to other console drivers 150options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 151# 152# Hpckbd will set key board layout appropriately. You can use option 153# 'PCKBD_LAYOUT' to overrite the default layout. 154# 155#options PCKBD_LAYOUT="(KB_US | KB_SWAPCTRLCAPS | KB_MACHDEP)" 156 157mainbus0 at root 158cpu0 at mainbus0 159bonito0 at mainbus0 160pci0 at bonito0 161sisfb0 at pci0 dev ? function ? 162voyager0 at pci0 dev ? function ? 163voyagerfb0 at voyager0 164iic* at voyager0 165strtc* at iic? addr 0x68 166options STRTC_NO_USERRAM 167lmtemp* at iic? addr 0x48 168#genfb0 at pci0 dev ? function ? 169wsdisplay* at wsemuldisplaydev? 170ehci* at pci0 dev ? function ? 171#options EHCI_DEBUG 172ohci* at pci0 dev ? function ? 173#options OHCI_DEBUG, USB_DEBUG, UHUB_DEBUG 174 175gcscpcib* at pci? dev ? function ? # AMD CS5535/CS5536 PCI-ISA w/ 176gpio* at gcscpcib? # timecounter, watchdog and GPIO 177isa0 at gcscpcib? 178 179pcib* at pci? 180isa0 at pcib? 181 182mcclock* at isa? port 0x70 # mc146818-compatible 183com0 at isa? port 0x2f8 irq 3 # Fuloong 2F only 184com1 at isa? port 0x3f8 irq 4 # Fuloong 2F only (IR port) 185 186pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver 187viaide* at pci? dev ? function ? # VIA/AMD/Nvidia IDE controllers 188options WDC_NO_IDS #workaround CS5536+JMH330 interrupt disable bug 189 190# ATA (IDE) bus support 191atabus* at ata? 192options ATADEBUG 193 194# IDE drives 195# Flags are used only with controllers that support DMA operations 196# and mode settings (e.g. some pciide controllers) 197# The lowest order four bits (rightmost digit) of the flags define the PIO 198# mode to use, the next set of four bits the DMA mode and the third set the 199# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode 200# to use, and the last bit must be 1 for this setting to be used. 201# For DMA and UDMA, 0xf (1111) means 'disable'. 202# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. 203# (0xc=1100, 0xa=1010, 0xf=1111) 204# 0x0000 means "use whatever the drive claims to support". 205wd* at atabus? drive ? flags 0x0000 206 207# ATAPI bus support 208#atapibus* at atapi? 209 210# ATAPI devices 211# flags have the same meaning as for IDE drives. 212#cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives 213#sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives 214#st* at atapibus? drive ? flags 0x0000 # ATAPI tape drives 215#uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown 216 217ral* at pci? dev ? function ? # RL2561S 802.11b/g 218rtk* at pci? dev ? function ? # RTL8139 100/10 Ethernet 219re* at pci? dev ? function ? # Realtek 8139C+/8169/8169S/8110S 220# MII/PHY support 221rgephy* at mii? phy ? # Realtek 8169S/8110S internal PHYs 222rlphy* at mii? phy ? # Realtek 8139/8201L PHYs 223ukphy* at mii? phy ? # generic unknown PHYs 224 225# USB Hubs 226usb* at ehci? 227usb* at ohci? 228uhub* at usb? 229uhub* at uhub? port ? 230 231# USB HID device 232uhidev* at uhub? port ? configuration ? interface ? 233 234# USB Mice 235ums* at uhidev? reportid ? 236wsmouse* at ums? mux 0 237 238# USB Keyboards 239ukbd* at uhidev? reportid ? 240wskbd* at ukbd? console ? mux 1 241 242# USB Generic HID devices 243uhid* at uhidev? reportid ? 244 245# USB serial adapter 246uftdi* at uhub? port ? configuration ? 247 248# USB Printer 249ulpt* at uhub? port ? configuration ? interface ? 250 251# USB Modem 252umodem* at uhub? port ? configuration ? 253ucom* at umodem? 254 255# Option N.V. Wireless WAN modems 256uhso* at uhub? port ? configuration ? 257 258# USB Mass Storage 259umass* at uhub? port ? configuration ? interface ? 260scsibus* at umass? channel ? 261sd* at scsibus? target ? lun ? # SCSI disk drives 262cd* at scsibus? target ? lun ? # SCSI CD-ROM drives 263 264# FTDI FT8U100AX serial adapter 265uftdi* at uhub? port ? 266ucom* at uftdi? portno ? 267 268uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter 269ucom* at uplcom? portno ? 270 271umct* at uhub? port ? # MCT USB-RS232 serial adapter 272ucom* at umct? portno ? 273 274# USB Generic driver 275ugen* at uhub? port ? 276 277# 278# accept filters 279pseudo-device accf_data # "dataready" accept filter 280pseudo-device accf_http # "httpready" accept filter 281 282pseudo-device loop 1 # network loopback 283pseudo-device ppp # serial-line IP ports 284pseudo-device pppoe # PPP over Ethernet (RFC 2516) 285pseudo-device pty # pseudo-terminals 286pseudo-device bpfilter # packet filter ports 287#pseudo-device carp # Common Address Redundancy Protocol 288pseudo-device ipfilter # IP filter, NAT 289 290pseudo-device vnd # virtual disk ick 291#options VND_COMPRESSION # compressed vnd(4) 292#pseudo-device ccd 4 # concatenated disks 293pseudo-device fss # file system snapshot device 294#pseudo-device cgd 4 # cryptographic disks 295pseudo-device rnd # /dev/random and in-kernel generator 296pseudo-device clockctl # user control of clock subsystem 297 298pseudo-device wsmux # mouse & keyboard multiplexor 299#pseudo-device md # memory disk device (ramdisk) 300 301#pseudo-device raid 8 # RAIDframe disk driver 302#options RAID_AUTOCONFIG # auto-configuration of RAID components 303# Options to enable various other RAIDframe RAID types. 304# options RF_INCLUDE_EVENODD=1 305# options RF_INCLUDE_RAID5_RS=1 306# options RF_INCLUDE_PARITYLOGGING=1 307# options RF_INCLUDE_CHAINDECLUSTER=1 308# options RF_INCLUDE_INTERDECLUSTER=1 309# options RF_INCLUDE_PARITY_DECLUSTERING=1 310# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 311 312# for IPv6 313pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 314#pseudo-device faith # IPv[46] tcp relay translation i/f 315pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 316 317## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 318pseudo-device vlan 319 320## Simple inter-network traffic bridging 321pseudo-device bridge 322#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 323pseudo-device agr # IEEE 802.3ad link aggregation 324pseudo-device ksyms # /dev/ksyms 325#pseudo-device pf # PF packet filter 326#pseudo-device pflog # PF log if 327 328# Veriexec 329# 330# a pseudo device needed for veriexec 331#pseudo-device veriexec 1 332# 333# Uncomment the fingerprint methods below that are desired. Note that 334# removing fingerprint methods will have almost no impact on the kernel 335# code size. 336# 337#options VERIFIED_EXEC_FP_RMD160 338#options VERIFIED_EXEC_FP_SHA256 339#options VERIFIED_EXEC_FP_SHA384 340#options VERIFIED_EXEC_FP_SHA512 341#options VERIFIED_EXEC_FP_SHA1 342#options VERIFIED_EXEC_FP_MD5 343