LOONGSON revision 1.23
1# $NetBSD: LOONGSON,v 1.23 2014/07/20 10:06:11 alnsn Exp $ 2# 3# LOONGSON machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21include "arch/evbmips/conf/std.loongson" 22 23options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25#ident "LOONGSON-$Revision: 1.23 $" 26 27maxusers 16 28 29# Standard system options 30options DDB # in-kernel debugger 31#options DDB_ONPANIC=0 # don't enter debugger on panic 32options DDB_HISTORY_SIZE=512 # enable history editing in DDB 33#options KGDB # remote debugger 34options DIAGNOSTIC # extra kernel debugging checks 35#options DEBUG # extra kernel debugging support 36#options PMAP_FAULTINFO 37#options LOCKDEBUG 38makeoptions DEBUG="-g" 39options KTRACE # system call tracing support 40options MSGBUFSIZE=8192 # dmesg buffer size 41 42## UVM options. 43#options UVM_PAGE_TRKOWN 44#options UVMHIST 45#options UVMHIST_PRINT # Loud! 46 47#options SCSIVERBOSE # human readable SCSI error messages 48#options PCMCIAVERBOSE # verbose PCMCIA configuration messages 49#options PCMCIADEBUG 50#options PCMCIACISDEBUG 51 52#options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT 53#options RTC_OFFSET=-540 # JST-9 54#options RTC_OFFSET=480 # PST8 55 # In NO RTC_OFFSET , inherit RTC_OFFSET 56 # from Windows CE. 57options NTP # network time protocol 58 59#options WINCE_DEFAULT_SETTING # Debugging use 60 61# Note: SysV IPC parameters can be changed dynamically; see sysctl(8). 62options SYSVMSG # System V-like message queues 63options SYSVSEM # System V-like semaphores 64options SYSVSHM # System V-like memory sharing 65 66#options SYSCALL_DEBUG # for debug 67#options HPCMIPS_L1CACHE_DISABLE # disable L1 cache for debug 68options USERCONF # userconf(4) support 69#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 70options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 71 72options INSECURE # disable kernel security levels 73 74# Filesystem options 75file-system FFS # fast filesystem with user and group quotas 76file-system MFS # memory-based filesystem 77file-system NFS # Sun NFS-compatible filesystem (client) 78file-system EXT2FS # second extended file system (linux) 79#file-system LFS # Log-based filesystem (still experimental) 80file-system CD9660 # ISO 9660 + Rock Ridge file system 81file-system MSDOSFS # MS-DOS file system 82#file-system FDESC # /dev/fd 83file-system KERNFS # /kern (kernel informational filesystem) 84file-system NULLFS # loopback file system 85#file-system OVERLAY # overlay file system 86file-system PROCFS # /proc 87#file-system UMAPFS # NULLFS + uid and gid remapping 88file-system UNION 89file-system PTYFS # /dev/pts/N support 90file-system TMPFS # Efficient memory file-system 91#file-system UDF # experimental - OSTA UDF CD/DVD file-system 92 93options NFSSERVER # Sun NFS-compatible filesystem (server) 94options WAPBL # File system journaling support 95#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 96#options QUOTA # legacy UFS quotas 97#options QUOTA2 # new, in-filesystem UFS quotas 98#options FFS_NO_SNAPSHOT # No FFS snapshot support 99 100# Networking options 101#options GATEWAY # IP packet forwarding 102options INET # IP + ICMP + TCP + UDP 103options INET6 # IPV6 104#options IPSEC # IP security 105#options IPSEC_DEBUG # debug for IP security 106#options MROUTING # Multicast routing support 107#options PIM # Protocol Independent Multicast 108options IPFILTER_LOG # ipmon(8) log support 109options IPFILTER_LOOKUP # ippool(8) support 110options IPFILTER_COMPAT # Compat for IP-Filter 111#options IPFILTER_DEFAULT_BLOCK # block all packets by default 112 113#options ALTQ # Manipulate network interfaces' output queues 114#options ALTQ_BLUE # Stochastic Fair Blue 115#options ALTQ_CBQ # Class-Based Queueing 116#options ALTQ_CDNR # Diffserv Traffic Conditioner 117#options ALTQ_FIFOQ # First-In First-Out Queue 118#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 119#options ALTQ_HFSC # Hierarchical Fair Service Curve 120#options ALTQ_LOCALQ # Local queueing discipline 121#options ALTQ_PRIQ # Priority Queueing 122#options ALTQ_RED # Random Early Detection 123#options ALTQ_RIO # RED with IN/OUT 124#options ALTQ_WFQ # Weighted Fair Queueing 125 126# JIT compiler for bpfilter 127#options SLJIT 128#options BPFJIT 129 130# NetBSD backwards compatibility 131options COMPAT_43 132options COMPAT_16 133options COMPAT_20 134options COMPAT_30 # NetBSD 3.0 compatibility. 135options COMPAT_40 # NetBSD 4.0 compatibility. 136options COMPAT_50 # NetBSD 5.0 compatibility. 137options COMPAT_60 # NetBSD 6.0 compatibility. 138options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 139 140 141#options NFS_BOOT_DHCP 142options NFS_BOOT_BOOTP 143#options NFS_BOOT_BOOTPARAM 144 145# compile options 146#makeoptions DEFGP="-G 10" 147 148config netbsd root on ? type ? 149 150# WS console uses SUN or VT100 terminal emulation 151options WSEMUL_VT100 152options WSDISPLAY_COMPAT_PCVT 153options WSDISPLAY_COMPAT_SYSCONS 154options WSDISPLAY_COMPAT_USL 155options WSDISPLAY_SCROLLSUPPORT 156options WS_KERNEL_FG=WSCOL_GREEN 157#options WSDISPLAY_DEFAULTSCREENS=4 158options FONT_GALLANT12x22 159options FONT_BOLD8x16 160# compatibility to other console drivers 161options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 162# 163# Hpckbd will set key board layout appropriately. You can use option 164# 'PCKBD_LAYOUT' to overrite the default layout. 165# 166#options PCKBD_LAYOUT="(KB_US | KB_SWAPCTRLCAPS | KB_MACHDEP)" 167 168mainbus0 at root 169cpu0 at mainbus0 170bonito0 at mainbus0 171pci0 at bonito0 172sisfb0 at pci0 dev ? function ? 173voyager0 at pci0 dev ? function ? # SM502 on GDIUM 174voyagerfb0 at voyager0 # framebuffer portion 175pwmclock0 at voyager0 # clock and CPU freq scaling 176iic* at voyager0 177strtc* at iic? addr 0x68 # GDIUM's real time clock 178options STRTC_NO_USERRAM 179lmtemp* at iic? addr 0x48 # GDIUM's temperature sensor 180stvii* at iic? addr 0x40 # GDIUM's onboard microcontroller 181lynxfb0 at pci0 dev ? function ? # SM712 on Yeeloong Notebook 182#genfb0 at pci0 dev ? function ? 183wsdisplay* at wsemuldisplaydev? 184ehci* at pci0 dev ? function ? 185#options EHCI_DEBUG 186ohci* at pci0 dev ? function ? 187#options OHCI_DEBUG, USB_DEBUG, UHUB_DEBUG 188 189gcscpcib* at pci? dev ? function ? # AMD CS5535/CS5536 PCI-ISA w/ 190gpio* at gcscpcib? # timecounter, watchdog and GPIO 191isa0 at gcscpcib? 192 193pcib* at pci? 194isa0 at pcib? 195 196pckbc0 at isa? # PC keyboard controller 197pckbd* at pckbc? # PC keyboard 198pms* at pckbc? # PS/2 mouse for wsmouse 199options PMS_SYNAPTICS_TOUCHPAD # Enable support for Synaptics Touchpads 200options PMS_ELANTECH_TOUCHPAD # Enable support for Elantech Touchpads 201wskbd* at pckbd? console ? 202wsmouse* at pms? mux 0 203 204mcclock* at isa? port 0x70 # mc146818-compatible 205com0 at isa? port 0x2f8 irq 3 # Fuloong 2F only 206com1 at isa? port 0x3f8 irq 4 # Fuloong 2F only (IR port) 207 208gcscaudio* at pci? 209audio* at audiobus? 210 211pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver 212viaide* at pci? dev ? function ? # VIA/AMD/Nvidia IDE controllers 213options WDC_NO_IDS #workaround CS5536+JMH330 interrupt disable bug 214 215# ATA (IDE) bus support 216atabus* at ata? 217options ATADEBUG 218 219# IDE drives 220# Flags are used only with controllers that support DMA operations 221# and mode settings (e.g. some pciide controllers) 222# The lowest order four bits (rightmost digit) of the flags define the PIO 223# mode to use, the next set of four bits the DMA mode and the third set the 224# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode 225# to use, and the last bit must be 1 for this setting to be used. 226# For DMA and UDMA, 0xf (1111) means 'disable'. 227# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. 228# (0xc=1100, 0xa=1010, 0xf=1111) 229# 0x0000 means "use whatever the drive claims to support". 230wd* at atabus? drive ? flags 0x0000 231 232# ATAPI bus support 233#atapibus* at atapi? 234 235# ATAPI devices 236# flags have the same meaning as for IDE drives. 237#cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives 238#sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives 239#st* at atapibus? drive ? flags 0x0000 # ATAPI tape drives 240#uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown 241 242ral* at pci? dev ? function ? # RL2561S 802.11b/g 243rtk* at pci? dev ? function ? # RTL8139 100/10 Ethernet 244re* at pci? dev ? function ? # Realtek 8139C+/8169/8169S/8110S 245# MII/PHY support 246rgephy* at mii? phy ? # Realtek 8169S/8110S internal PHYs 247rlphy* at mii? phy ? # Realtek 8139/8201L PHYs 248ukphy* at mii? phy ? # generic unknown PHYs 249 250# USB Hubs 251usb* at ehci? 252usb* at ohci? 253uhub* at usb? 254uhub* at uhub? port ? 255 256# USB HID device 257uhidev* at uhub? port ? configuration ? interface ? 258 259# USB Mice 260ums* at uhidev? reportid ? 261wsmouse* at ums? mux 0 262 263# USB Keyboards 264ukbd* at uhidev? reportid ? 265wskbd* at ukbd? console ? mux 1 266options GDIUM_KEYBOARD_HACK # support Fn key on Gdium 267 268# USB Generic HID devices 269uhid* at uhidev? reportid ? 270 271# USB serial adapter 272uftdi* at uhub? port ? configuration ? 273 274# USB Printer 275ulpt* at uhub? port ? configuration ? interface ? 276 277# USB Modem 278umodem* at uhub? port ? configuration ? 279ucom* at umodem? 280 281# Option N.V. Wireless WAN modems 282uhso* at uhub? port ? configuration ? 283 284# USB Mass Storage 285umass* at uhub? port ? configuration ? interface ? 286scsibus* at umass? channel ? 287sd* at scsibus? target ? lun ? # SCSI disk drives 288cd* at scsibus? target ? lun ? # SCSI CD-ROM drives 289 290# FTDI FT8U100AX serial adapter 291uftdi* at uhub? port ? 292ucom* at uftdi? portno ? 293 294uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter 295ucom* at uplcom? portno ? 296 297umct* at uhub? port ? # MCT USB-RS232 serial adapter 298ucom* at umct? portno ? 299 300# Realtek RTL8187/RTL8187B 802.11b/g USB wireless adapter 301urtw* at uhub? port ? 302 303# USB Generic driver 304ugen* at uhub? port ? 305 306# 307# accept filters 308pseudo-device accf_data # "dataready" accept filter 309pseudo-device accf_http # "httpready" accept filter 310 311pseudo-device loop # network loopback 312pseudo-device ppp # serial-line IP ports 313pseudo-device pppoe # PPP over Ethernet (RFC 2516) 314pseudo-device pty # pseudo-terminals 315pseudo-device bpfilter # packet filter ports 316#pseudo-device carp # Common Address Redundancy Protocol 317pseudo-device ipfilter # IP filter, NAT 318 319pseudo-device vnd # virtual disk ick 320#options VND_COMPRESSION # compressed vnd(4) 321#pseudo-device ccd # concatenated disks 322pseudo-device fss # file system snapshot device 323#pseudo-device cgd # cryptographic disks 324pseudo-device clockctl # user control of clock subsystem 325 326pseudo-device wsmux # mouse & keyboard multiplexor 327pseudo-device wsfont 328#pseudo-device md # memory disk device (ramdisk) 329 330#pseudo-device raid # RAIDframe disk driver 331#options RAID_AUTOCONFIG # auto-configuration of RAID components 332# Options to enable various other RAIDframe RAID types. 333# options RF_INCLUDE_EVENODD=1 334# options RF_INCLUDE_RAID5_RS=1 335# options RF_INCLUDE_PARITYLOGGING=1 336# options RF_INCLUDE_CHAINDECLUSTER=1 337# options RF_INCLUDE_INTERDECLUSTER=1 338# options RF_INCLUDE_PARITY_DECLUSTERING=1 339# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 340 341# for IPv6 342pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 343#pseudo-device faith # IPv[46] tcp relay translation i/f 344pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 345 346## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 347pseudo-device vlan 348 349## Simple inter-network traffic bridging 350pseudo-device bridge 351#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 352pseudo-device agr # IEEE 802.3ad link aggregation 353pseudo-device ksyms # /dev/ksyms 354#pseudo-device pf # PF packet filter 355#pseudo-device pflog # PF log if 356 357# Veriexec 358# 359# a pseudo device needed for veriexec 360#pseudo-device veriexec 361# 362# Uncomment the fingerprint methods below that are desired. Note that 363# removing fingerprint methods will have almost no impact on the kernel 364# code size. 365# 366#options VERIFIED_EXEC_FP_RMD160 367#options VERIFIED_EXEC_FP_SHA256 368#options VERIFIED_EXEC_FP_SHA384 369#options VERIFIED_EXEC_FP_SHA512 370#options VERIFIED_EXEC_FP_SHA1 371#options VERIFIED_EXEC_FP_MD5 372