GENERIC revision 1.41
1# $NetBSD: GENERIC,v 1.41 2003/02/27 19:22:40 perseant Exp $
2#
3# GENERIC machine description file
4# 
5# This machine description file is used to generate the default NetBSD
6# kernel.  The generic kernel does not include all options, subsystems
7# and device drivers, but should be useful for most applications.
8#
9# The machine description file can be customised for your specific
10# machine to reduce the kernel size and improve its performance.
11#
12# For further information on compiling NetBSD kernels, see the config(8)
13# man page.
14#
15# For further information on hardware support for this architecture, see
16# the intro(4) man page.  For further information about kernel options
17# for this architecture, see the options(4) man page.  For an explanation
18# of each device driver in this file see the section 4 man page for the
19# device.
20
21include 	"arch/cobalt/conf/std.cobalt"
22
23options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
24
25#ident 		"GENERIC-$Revision: 1.41 $"
26
27maxusers	32
28
29# Standard system options
30options 	KTRACE		# system call tracing support
31options 	SYSTRACE	# system call vetting via systrace(1)
32options 	SYSVMSG		# System V message queues
33options 	SYSVSEM		# System V semaphores
34#options 	SEMMNI=10	# number of semaphore identifiers
35#options 	SEMMNS=60	# number of semaphores in system
36#options 	SEMUME=10	# max number of undo entries per process
37#options 	SEMMNU=30	# number of undo structures in system
38options 	SYSVSHM		# System V shared memory
39#options 	SHMMAXPGS=1024	# 1024 pages is the default
40#options 	LKM		# loadable kernel modules
41#options 	NTP		# network time protocol
42#options 	UCONSOLE	# users can redirect console (unsafe)
43options 	USERCONF	# userconf(4) support
44#options	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
45
46# Enable experimental buffer queue strategy for better responsiveness under 
47# high disk I/O load. Use it with caution - it's not proven to be stable yet.
48#options 	NEW_BUFQ_STRATEGY
49
50# Debugging options
51options 	DIAGNOSTIC	# extra kernel sanity checking
52#options 	DEBUG		# extra kernel debugging support
53#options 	KMEMSTATS	# kernel memory statistics (vmstat -m)
54options 	DDB		# kernel dynamic debugger
55#options 	DDB_HISTORY_SIZE=100 # enable history editing in DDB
56#makeoptions	DEBUG="-g"	# compile full symbol table
57
58# Compatibility options
59options 	COMPAT_43	# compatibility with 4.3BSD binaries
60#options 	COMPAT_10	# NetBSD 0.9 binary compatibility
61#options 	COMPAT_10	# NetBSD 1.0 binary compatibility
62#options 	COMPAT_11	# NetBSD 1.1 binary compatibility
63#options 	COMPAT_12	# NetBSD 1.2 binary compatibility
64#options 	COMPAT_13	# NetBSD 1.3 binary compatibility
65#options 	COMPAT_14	# NetBSD 1.4 binary compatibility
66options 	COMPAT_15	# NetBSD 1.5 binary compatibility
67#options 	EXEC_ECOFF	# exec ECOFF binaries
68#options 	COMPAT_ULTRIX	# binary compatibility with Ultrix
69#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
70
71# File systems
72file-system	FFS		# Berkeley Fast Filesystem
73file-system 	EXT2FS		# second extended file system (linux)
74file-system	NFS		# Sun NFS-compatible filesystem client
75#file-system	KERNFS		# kernel data-structure filesystem
76#file-system	NULLFS		# NULL layered filesystem
77#file-system 	OVERLAY		# overlay file system
78file-system	MFS		# memory-based filesystem
79file-system	FDESC		# user file descriptor filesystem
80#file-system	UMAPFS		# uid/gid remapping filesystem
81#file-system	LFS		# Log-based filesystem (still experimental)
82#file-system	PORTAL		# portal filesystem (still experimental)
83#file-system	PROCFS		# /proc
84#file-system	CD9660		# ISO 9660 + Rock Ridge file system
85#file-system	UNION		# union file system
86#file-system	MSDOSFS		# MS-DOS FAT filesystem(s).
87#file-system 	CODA		# Coda File System; also needs vcoda (below)
88
89# File system options
90options 	NFSSERVER	# Sun NFS-compatible filesystem server
91options 	QUOTA		# FFS quotas
92#options 	FFS_EI		# FFS Endian Independant support
93options 	SOFTDEP		# FFS soft updates support.
94#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
95				# immutable) behave as system flags.
96
97# Networking options
98#options 	GATEWAY		# IP packet forwarding
99options 	INET		# Internet protocols
100#options 	INET6		# IPV6
101#options 	IPSEC		# IP security
102#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
103#options 	IPSEC_DEBUG	# debug for IP security
104#options 	MROUTING	# packet forwarding of multicast packets
105#options 	NS		# Xerox NS networking
106#options 	NSIP		# Xerox NS tunneling over IP
107#options 	ISO,TPIP	# OSI networking
108#options 	EON		# OSI tunneling over IP
109#options 	CCITT,LLC,HDLC	# X.25
110#options 	NETATALK	# AppleTalk (over Ethernet) protocol
111#options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
112#options 	PPP_DEFLATE	# Deflate compression support for PPP
113#options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
114#options 	PFIL_HOOKS	# pfil(9) packet filter hooks
115#options 	IPFILTER_LOG	# ipmon(8) log support
116#options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
117#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
118
119# These options enable verbose messages for several subsystems.
120# Warning, these may compile large string tables into the kernel!
121options 	PCIVERBOSE	# verbose PCI device autoconfig messages
122#options 	PCI_CONFIG_DUMP	# verbosely dump PCI config space
123options 	SCSIVERBOSE	# human readable SCSI error messages
124#options 	MIIVERBOSE	# verbose PHY autoconfig messages
125
126options 	NFS_BOOT_DHCP
127
128config		netbsd	root on ? type ?
129
130mainbus0 	at root
131
132cpu0 		at mainbus?
133
134com0		at mainbus? addr 0x1c800000 level 3
135options 	COM16650
136
137panel0 		at mainbus? addr 0x1f000000
138
139gt0 		at mainbus? addr 0x14000000
140
141pci* 		at gt0
142pchb* 		at pci? dev ? function ?
143pcib* 		at pci? dev ? function ?
144
145# PCI serial/parallel interfaces
146#puc* 		at pci? dev ? function ? 	# PCI "universal" comm. cards
147#com* 		at puc? port ?
148#lpt* 		at puc? port ?
149#cy* 		at pci? dev ? function ?	# Cyclades Cyclom-Y serial cards
150
151# PCI SCSI controllers
152#adv*		at pci? dev ? function ?	# AdvanSys 1200[A,B], 9xx[U,UA]
153#adw*		at pci? dev ? function ?	# AdvanSys 9xxUW SCSI
154ahc*		at pci? dev ? function ?	# Adaptec [23]94x, aic78x0 SCSI
155#bha*		at pci? dev ? function ?	# BusLogic 9xx SCSI
156#dpt*		at pci? dev ? function ?	# DPT SmartCache/SmartRAID
157#isp*		at pci? dev ? function ?	# Qlogic ISP [12]0x0 SCSI/FC
158siop*		at pci? dev ? function ?	# NCR 53c8xx SCSI
159#pcscp*		at pci? dev ? function ?	# AMD 53c974 PCscsi-PCI SCSI
160
161# SCSI bus support
162#scsibus* 	at adv?
163#scsibus* 	at adw?
164scsibus* 	at ahc?
165#scsibus* 	at bha?
166#scsibus* 	at dpt?
167#scsibus* 	at isp?
168scsibus* 	at siop?
169#scsibus* 	at pcscp?
170
171# SCSI devices
172sd*		at scsibus? target ? lun ?	# SCSI disk drives
173st*		at scsibus? target ? lun ?	# SCSI tape drives
174#cd*		at scsibus? target ? lun ?	# SCSI CD-ROM drives
175#ch*		at scsibus? target ? lun ?	# SCSI autochangers
176#ss*		at scsibus? target ? lun ?	# SCSI scanners
177#uk*		at scsibus? target ? lun ?	# SCSI unknown
178
179# RAID controllers and devices
180#cac*		at pci? dev ? function ?	# Compaq array controller
181#ca*		at cac? unit ?			# Compaq array disk device
182
183# IDE and related devices
184# PCI IDE controllers - see pciide(4) for supported hardware.
185# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
186# how to set up DMA modes for this chip. This may work, or may cause
187# a machine hang with some controllers.
188pciide* 	at pci? dev ? function ? flags 0x0000
189
190# IDE drives
191# Flags are used only with controllers that support DMA operations
192# and mode settings (e.g. some pciide controllers)
193# The lowest order four bits (rightmost digit) of the flags define the PIO
194# mode to use, the next set of four bits the DMA mode and the third set the
195# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
196# to use, and the last bit must be 1 for this setting to be used.
197# For DMA and UDMA, 0xf (1111) means 'disable'.
198# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
199# (0xc=1100, 0xa=1010, 0xf=1111)
200# 0x0000 means "use whatever the drive claims to support".
201wd* 		at pciide? channel ? drive ? flags 0x0000
202
203# PCI network interfaces
204#en*		at pci? dev ? function ?	# ENI/Adaptec ATM
205#ep*		at pci? dev ? function ?	# 3Com 3c59x
206#ex*		at pci? dev ? function ?	# 3Com 90x[BC]
207#epic*		at pci? dev ? function ?	# SMC EPIC/100 Ethernet
208#esh*		at pci? dev ? function ?	# Essential HIPPI card
209#fpa*		at pci? dev ? function ?	# DEC DEFPA FDDI
210#fxp*		at pci? dev ? function ?	# Intel EtherExpress PRO10+/100B
211#le*		at pci? dev ? function ?	# PCnet-PCI Ethernet
212#ne*		at pci? dev ? function ?	# NE2000-compatible Ethernet
213#ntwoc*		at pci? dev ? function ?	# Riscom/N2 PCI Sync Serial
214#sip*		at pci? dev ? function ?	# SiS 900 Ethernet
215#tl*		at pci? dev ? function ?	# ThunderLAN-based Ethernet
216tlp*		at pci? dev ? function ?	# DECchip 21x4x and clones
217#vr*		at pci? dev ? function ?	# VIA Rhine Fast Ethernet
218#lmc*		at pci? dev ? function ?	# Lan Media Corp SSI/HSSI/DS3
219#rtk*		at pci? dev ? function ?	# Realtek 8129/8139
220
221# MII/PHY support
222#exphy*		at mii? phy ?			# 3Com internal PHYs
223#icsphy*		at mii? phy ?			# ICS189x PHYs
224#inphy*		at mii? phy ?			# Intel 82555 PHYs
225#iophy*		at mii? phy ?			# Intel 82553 PHYs
226lxtphy*		at mii? phy ?			# Level One LXT-970 PHYs
227#nsphy*		at mii? phy ?			# NS83840 PHYs
228#nsphyter* 	at mii? phy ?			# NS83843 PHYs
229#qsphy*		at mii? phy ?			# Quality Semiconductor QS6612
230#sqphy*		at mii? phy ?			# Seeq 80220/80221/80223 PHYs
231#tlphy*		at mii? phy ?			# ThunderLAN PHYs
232#tqphy*		at mii? phy ?			# TDK Semiconductor PHYs
233#ukphy*		at mii? phy ?			# generic unknown PHYs
234
235# PCI audio devices
236#clcs*		at pci? dev ? function ?	# Cirrus Logic CS4280
237#eap*		at pci? dev ? function ?	# Ensoniq AudioPCI
238#eso*		at pci? dev ? function ?	# ESS Solo-1 PCI AudioDrive
239#fms*		at pci? dev ? function ?	# Forte Media FM801
240#sbl*		at pci? dev ? function ?	# SoundBlaster Live!
241#sv*		at pci? dev ? function ?	# S3 SonicVibes
242
243# Pseudo-devices
244
245# Disk/mass storage pseudo-devices
246#pseudo-device	ccd		4		# concatenated disk devices
247#pseudo-device	cgd		4		# cryptographic disk devices
248pseudo-device	raid		8		# RAIDframe disk driver
249options 	RAID_AUTOCONFIG			# auto-configuration of RAID
250# Options to enable various other RAIDframe RAID types.
251# options	RF_INCLUDE_EVENODD=1
252# options	RF_INCLUDE_RAID5_RS=1
253# options	RF_INCLUDE_PARITYLOGGING=1
254# options	RF_INCLUDE_CHAINDECLUSTER=1
255# options	RF_INCLUDE_INTERDECLUSTER=1
256# options 	RF_INCLUDE_PARITY_DECLUSTERING=1
257# options	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
258#pseudo-device	md		1		# memory disk device (ramdisk)
259#pseudo-device	vnd		4		# disk-like interface to files
260
261# Network pseudo-devices
262pseudo-device	bpfilter	8		# Berkeley packet filter
263#pseudo-device	ipfilter			# IP filter (firewall) and NAT
264pseudo-device	loop				# network loopback
265#pseudo-device	ppp		2		# Point-to-Point Protocol
266#pseudo-device	pppoe				# PPP over Ethernet (RFC 2516)
267#pseudo-device	sl		2		# Serial Line IP
268#pseudo-device	strip		2		# Starmode Radio IP (Metricom)
269#pseudo-device	tun		2		# network tunneling over tty
270#pseudo-device	gre		2		# generic L3 over IP tunnel
271#pseudo-device	gif		4		# RFC1933 tunnel
272#pseudo-device	faith		1		# IPv[46] tcp relay translation
273#pseudo-device	stf		1		# 6to4 IPv6 over IPv4 encapsulation
274pseudo-device	vlan			# IEEE 802.1q encapsulation
275pseudo-device	bridge			# simple inter-network bridging
276#options	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
277
278# Miscellaneous pseudo-devices
279pseudo-device	pty				# pseudo-terminals
280#pseudo-device	tb		1		# tablet line discipline
281#pseudo-device	sequencer	1		# MIDI sequencer
282pseudo-device	rnd				# /dev/random & kernel generator
283#options 	RND_COM				# use "com" randomness (BROKEN)
284pseudo-device	clockctl		# user control of clock subsystem
285
286# A pseudo device needed for Coda		# also needs CODA (above)
287#pseudo-device	vcoda		4		# coda minicache <-> venus comm.
288