1/* $NetBSD: dma.h,v 1.2 2001/07/24 16:26:53 tsutsui Exp $ */ 2/* $OpenBSD: dma.h,v 1.3 1997/04/19 17:19:51 pefo Exp $ */ 3 4/* 5 * Copyright (c) 1996 Per Fogelstrom 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. All advertising materials mentioning features or use of this software 17 * must display the following acknowledgement: 18 * This product includes software developed by Per Fogelstrom. 19 * 4. The name of the author may not be used to endorse or promote products 20 * derived from this software without specific prior written permission 21 * 22 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 23 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 24 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 25 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 26 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 27 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 28 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 29 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 31 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 32 */ 33 34/* 35 * Hardware dma registers. 36 */ 37 38#define R4030_DMA_MODE 0x00 39#define R4030_DMA_MODE_40NS 0x00 /* Device dma timing */ 40#define R4030_DMA_MODE_80NS 0x01 /* Device dma timing */ 41#define R4030_DMA_MODE_120NS 0x02 /* Device dma timing */ 42#define R4030_DMA_MODE_160NS 0x03 /* Device dma timing */ 43#define R4030_DMA_MODE_200NS 0x04 /* Device dma timing */ 44#define R4030_DMA_MODE_240NS 0x05 /* Device dma timing */ 45#define R4030_DMA_MODE_280NS 0x06 /* Device dma timing */ 46#define R4030_DMA_MODE_320NS 0x07 /* Device dma timing */ 47#define R4030_DMA_MODE_8 0x08 /* Device 8 bit */ 48#define R4030_DMA_MODE_16 0x10 /* Device 16 bit */ 49#define R4030_DMA_MODE_32 0x18 /* Device 32 bit */ 50#define R4030_DMA_MODE_INT 0x20 /* Interrupt when done */ 51#define R4030_DMA_MODE_BURST 0x40 /* Burst mode (Rev 2 only) */ 52#define R4030_DMA_MODE_FAST 0x80 /* Fast dma cycle (Rev 2 only) */ 53 54#define R4030_DMA_ENAB 0x08 55#define R4030_DMA_ENAB_RUN 0x0001 /* Enable dma */ 56#define R4030_DMA_ENAB_READ 0x0000 /* Read from device */ 57#define R4030_DMA_ENAB_WRITE 0x0002 /* Write to device */ 58#define R4030_DMA_ENAB_TC_IE 0x0100 /* Terminal count int enable */ 59#define R4030_DMA_ENAB_ME_IE 0x0200 /* Memory error int enable */ 60#define R4030_DMA_ENAB_TL_IE 0x0400 /* Translation limit int enable */ 61 62#define R4030_DMA_COUNT 0x10 63#define R4030_DMA_COUNT_MASK 0x000fffff /* Byte count mask */ 64 65#define R4030_DMA_ADDR 0x18 66 67#define R4030_DMA_RANGE 0x20 68