mcpcia.c revision 1.27
1/* $NetBSD: mcpcia.c,v 1.27 2011/05/17 17:34:47 dyoung Exp $ */
2
3/*-
4 * Copyright (c) 1999 The NetBSD Foundation, Inc.
5 * All rights reserved.
6 *
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
9 * NASA Ames Research Center.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 *    notice, this list of conditions and the following disclaimer.
16 * 2. Redistributions in binary form must reproduce the above copyright
17 *    notice, this list of conditions and the following disclaimer in the
18 *    documentation and/or other materials provided with the distribution.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
23 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
30 * POSSIBILITY OF SUCH DAMAGE.
31 */
32
33/*
34 * Copyright (c) 1998 by Matthew Jacob
35 * NASA AMES Research Center.
36 * All rights reserved.
37 *
38 * Redistribution and use in source and binary forms, with or without
39 * modification, are permitted provided that the following conditions
40 * are met:
41 * 1. Redistributions of source code must retain the above copyright
42 *    notice immediately at the beginning of the file, without modification,
43 *    this list of conditions, and the following disclaimer.
44 * 2. Redistributions in binary form must reproduce the above copyright
45 *    notice, this list of conditions and the following disclaimer in the
46 *    documentation and/or other materials provided with the distribution.
47 * 3. The name of the author may not be used to endorse or promote products
48 *    derived from this software without specific prior written permission.
49 *
50 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
51 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
52 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
53 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
54 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
55 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
56 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
57 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
58 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
59 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
60 * SUCH DAMAGE.
61 */
62
63/*
64 * MCPCIA mcbus to PCI bus adapter
65 * found on AlphaServer 4100 systems.
66 */
67
68#include <sys/cdefs.h>			/* RCS ID & Copyright macro defns */
69
70__KERNEL_RCSID(0, "$NetBSD: mcpcia.c,v 1.27 2011/05/17 17:34:47 dyoung Exp $");
71
72#include <sys/param.h>
73#include <sys/systm.h>
74#include <sys/device.h>
75#include <sys/malloc.h>
76
77#include <machine/autoconf.h>
78#include <machine/rpb.h>
79#include <machine/sysarch.h>
80
81#include <alpha/mcbus/mcbusreg.h>
82#include <alpha/mcbus/mcbusvar.h>
83#include <alpha/pci/mcpciareg.h>
84#include <alpha/pci/mcpciavar.h>
85#include <alpha/pci/pci_kn300.h>
86
87#define KV(_addr)	((void *)ALPHA_PHYS_TO_K0SEG((_addr)))
88#define	MCPCIA_SYSBASE(mc)	\
89	((((unsigned long) (mc)->cc_gid) << MCBUS_GID_SHIFT) | \
90	 (((unsigned long) (mc)->cc_mid) << MCBUS_MID_SHIFT) | \
91	 (MCBUS_IOSPACE))
92
93#define	MCPCIA_PROBE(mid, gid)	\
94	badaddr((void *)KV(((((unsigned long) gid) << MCBUS_GID_SHIFT) | \
95	 (((unsigned long) mid) << MCBUS_MID_SHIFT) | \
96	 (MCBUS_IOSPACE) | MCPCIA_PCI_BRIDGE | _MCPCIA_PCI_REV)), \
97	sizeof(u_int32_t))
98
99static int	mcpciamatch(struct device *, struct cfdata *, void *);
100static void	mcpciaattach(struct device *, struct device *, void *);
101CFATTACH_DECL(mcpcia, sizeof(struct mcpcia_softc),
102    mcpciamatch, mcpciaattach, NULL, NULL);
103
104void	mcpcia_init0(struct mcpcia_config *, int);
105
106/*
107 * We have one statically-allocated mcpcia_config structure; this is
108 * the one used for the console (which, coincidentally, is the only
109 * MCPCIA with an EISA adapter attached to it).
110 */
111struct mcpcia_config mcpcia_console_configuration;
112
113int	mcpcia_bus_get_window(int, int,
114	    struct alpha_bus_space_translation *abst);
115
116static int
117mcpciamatch(struct device *parent, struct cfdata *cf, void *aux)
118{
119	struct mcbus_dev_attach_args *ma = aux;
120	if (ma->ma_type == MCBUS_TYPE_PCI)
121		return (1);
122	return (0);
123}
124
125static void
126mcpciaattach(struct device *parent, struct device *self, void *aux)
127{
128	static int first = 1;
129	struct mcbus_dev_attach_args *ma = aux;
130	struct mcpcia_softc *mcp = (struct mcpcia_softc *)self;
131	struct mcpcia_config *ccp;
132	struct pcibus_attach_args pba;
133	u_int32_t ctl;
134
135	/*
136	 * Make sure this MCPCIA exists...
137	 */
138	if (MCPCIA_PROBE(ma->ma_mid, ma->ma_gid)) {
139		mcp->mcpcia_cc = NULL;
140		printf(" (not present)\n");
141		return;
142	}
143	printf("\n");
144
145	/*
146	 * Determine if we're the console's MCPCIA.
147	 */
148	if (ma->ma_mid == mcpcia_console_configuration.cc_mid &&
149	    ma->ma_gid == mcpcia_console_configuration.cc_gid)
150		ccp = &mcpcia_console_configuration;
151	else {
152		ccp = malloc(sizeof(struct mcpcia_config), M_DEVBUF, M_WAITOK);
153		memset(ccp, 0, sizeof(struct mcpcia_config));
154
155		ccp->cc_mid = ma->ma_mid;
156		ccp->cc_gid = ma->ma_gid;
157	}
158
159	mcp->mcpcia_cc = ccp;
160	ccp->cc_sc = mcp;
161
162	/* This initializes cc_sysbase so we can do register access. */
163	mcpcia_init0(ccp, 1);
164
165	ctl = REGVAL(MCPCIA_PCI_REV(ccp));
166	printf("%s: Horse Revision %d, %s Handed Saddle Revision %d,"
167	    " CAP Revision %d\n", mcp->mcpcia_dev.dv_xname, HORSE_REV(ctl),
168	    (SADDLE_TYPE(ctl) & 1)? "Right": "Left", SADDLE_REV(ctl),
169	    CAP_REV(ctl));
170
171	mcpcia_dma_init(ccp);
172
173	/*
174	 * Set up interrupts
175	 */
176	pci_kn300_pickintr(ccp, first);
177	first = 0;
178
179	/*
180	 * Attach PCI bus
181	 */
182	pba.pba_iot = &ccp->cc_iot;
183	pba.pba_memt = &ccp->cc_memt;
184	pba.pba_dmat =	/* start with direct, may change... */
185	    alphabus_dma_get_tag(&ccp->cc_dmat_direct, ALPHA_BUS_PCI);
186	pba.pba_dmat64 = NULL;
187	pba.pba_pc = &ccp->cc_pc;
188	pba.pba_bus = 0;
189	pba.pba_bridgetag = NULL;
190	pba.pba_flags = PCI_FLAGS_IO_OKAY | PCI_FLAGS_MEM_OKAY |
191	    PCI_FLAGS_MRL_OKAY | PCI_FLAGS_MRM_OKAY | PCI_FLAGS_MWI_OKAY;
192	(void) config_found_ia(self, "pcibus", &pba, pcibusprint);
193
194	/*
195	 * Clear any errors that may have occurred during the probe
196	 * sequence.
197	 */
198	REGVAL(MCPCIA_CAP_ERR(ccp)) = 0xFFFFFFFF;
199	alpha_mb();
200}
201
202void
203mcpcia_init(void)
204{
205	struct mcpcia_config *ccp = &mcpcia_console_configuration;
206	int i;
207
208	/*
209	 * Look for all of the MCPCIAs on the system.  One of them
210	 * will have an EISA attached to it.  This MCPCIA is the
211	 * only one that can be used for the console.  Once we find
212	 * that one, initialize it.
213	 */
214
215	for (i = 0; i < MCPCIA_PER_MCBUS; i++) {
216		ccp->cc_mid = mcbus_mcpcia_probe_order[i];
217		/*
218		 * XXX If we ever support more than one MCBUS, we'll
219		 * XXX have to probe for them, and map them to unit
220		 * XXX numbers.
221		 */
222		ccp->cc_gid = MCBUS_GID_FROM_INSTANCE(0);
223		ccp->cc_sysbase = MCPCIA_SYSBASE(ccp);
224
225		if (badaddr((void *)ALPHA_PHYS_TO_K0SEG(MCPCIA_PCI_REV(ccp)),
226		    sizeof(u_int32_t)))
227			continue;
228
229		if (EISA_PRESENT(REGVAL(MCPCIA_PCI_REV(ccp)))) {
230			mcpcia_init0(ccp, 0);
231
232			alpha_bus_window_count[ALPHA_BUS_TYPE_PCI_IO] = 2;
233			alpha_bus_window_count[ALPHA_BUS_TYPE_PCI_MEM] = 3;
234
235			alpha_bus_get_window = mcpcia_bus_get_window;
236			return;
237		}
238	}
239
240	panic("mcpcia_init: unable to find EISA bus");
241}
242
243void
244mcpcia_init0(struct mcpcia_config *ccp, int mallocsafe)
245{
246	u_int32_t ctl;
247
248	if (ccp->cc_initted == 0) {
249		/* don't do these twice since they set up extents */
250		mcpcia_bus_io_init(&ccp->cc_iot, ccp);
251		mcpcia_bus_mem_init(&ccp->cc_memt, ccp);
252	}
253	ccp->cc_mallocsafe = mallocsafe;
254
255	mcpcia_pci_init(&ccp->cc_pc, ccp);
256
257	/*
258	 * Establish a precalculated base for convenience's sake.
259	 */
260	ccp->cc_sysbase = MCPCIA_SYSBASE(ccp);
261
262	/*
263 	 * Disable interrupts and clear errors prior to probing
264	 */
265	REGVAL(MCPCIA_INT_MASK0(ccp)) = 0;
266	REGVAL(MCPCIA_INT_MASK1(ccp)) = 0;
267	REGVAL(MCPCIA_CAP_ERR(ccp)) = 0xFFFFFFFF;
268	alpha_mb();
269
270	if (ccp == &mcpcia_console_configuration) {
271		/*
272		 * Use this opportunity to also find out the MID and CPU
273		 * type of the currently running CPU (that's us, billybob....)
274		 */
275		ctl = REGVAL(MCPCIA_WHOAMI(ccp));
276		mcbus_primary.mcbus_cpu_mid = MCBUS_CPU_MID(ctl);
277		if ((MCBUS_CPU_INFO(ctl) & CPU_Fill_Err) == 0 &&
278		    mcbus_primary.mcbus_valid == 0) {
279			mcbus_primary.mcbus_bcache =
280			    MCBUS_CPU_INFO(ctl) & CPU_BCacheMask;
281			mcbus_primary.mcbus_valid = 1;
282		}
283		alpha_mb();
284	}
285
286	ccp->cc_initted = 1;
287}
288
289#ifdef TEST_PROBE_DEATH
290static void
291die_heathen_dog(void *arg)
292{
293	struct mcpcia_config *ccp = arg;
294
295	/* this causes a fatal machine check (0x670) */
296	REGVAL(MCPCIA_CAP_DIAG(ccp)) |= CAP_DIAG_MC_ADRPE;
297}
298#endif
299
300void
301mcpcia_config_cleanup(void)
302{
303	volatile u_int32_t ctl;
304	struct mcpcia_softc *mcp;
305	struct mcpcia_config *ccp;
306	int i;
307	extern struct cfdriver mcpcia_cd;
308
309	/*
310	 * Turn on Hard, Soft error interrupts. Maybe i2c too.
311	 */
312	for (i = 0; i < mcpcia_cd.cd_ndevs; i++) {
313		if ((mcp = device_lookup_private(&mcpcia_cd, i)) == NULL)
314			continue;
315
316		ccp = mcp->mcpcia_cc;
317		if (ccp == NULL)
318			continue;
319
320		ctl = REGVAL(MCPCIA_INT_MASK0(ccp));
321		ctl |= MCPCIA_GEN_IENABL;
322		REGVAL(MCPCIA_INT_MASK0(ccp)) = ctl;
323		alpha_mb();
324
325		/* force stall while write completes */
326		ctl = REGVAL(MCPCIA_INT_MASK0(ccp));
327	}
328#ifdef TEST_PROBE_DEATH
329	(void) timeout (die_heathen_dog, &mcpcia_console_configuration,
330	    30 * hz);
331#endif
332}
333
334int
335mcpcia_bus_get_window(int type, int window, struct alpha_bus_space_translation *abst)
336{
337	struct mcpcia_config *ccp = &mcpcia_console_configuration;
338	bus_space_tag_t st;
339
340	switch (type) {
341	case ALPHA_BUS_TYPE_PCI_IO:
342		st = &ccp->cc_iot;
343		break;
344
345	case ALPHA_BUS_TYPE_PCI_MEM:
346		st = &ccp->cc_memt;
347		break;
348
349	default:
350		panic("mcpcia_bus_get_window");
351	}
352
353	return (alpha_bus_space_get_window(st, window, abst));
354}
355