main.cf revision 1.4
1# $NetBSD: main.cf,v 1.4 2013/01/06 13:58:24 tron Exp $ 2# 3# Global Postfix configuration file. This file lists only a subset 4# of all parameters. For the syntax, and for a complete parameter 5# list, see the postconf(5) manual page (command: "man 5 postconf"). 6# 7# For common configuration examples, see BASIC_CONFIGURATION_README 8# and STANDARD_CONFIGURATION_README. To find these documents, use 9# the command "postconf html_directory readme_directory", or go to 10# http://www.postfix.org/. 11# 12# For best results, change no more than 2-3 parameters at a time, 13# and test if Postfix still works after every change. 14 15# SOFT BOUNCE 16# 17# The soft_bounce parameter provides a limited safety net for 18# testing. When soft_bounce is enabled, mail will remain queued that 19# would otherwise bounce. This parameter disables locally-generated 20# bounces, and prevents the SMTP server from rejecting mail permanently 21# (by changing 5xx replies into 4xx replies). However, soft_bounce 22# is no cure for address rewriting mistakes or mail routing mistakes. 23# 24#soft_bounce = no 25 26# LOCAL PATHNAME INFORMATION 27# 28# The queue_directory specifies the location of the Postfix queue. 29# This is also the root directory of Postfix daemons that run chrooted. 30# See the files in examples/chroot-setup for setting up Postfix chroot 31# environments on different UNIX systems. 32# 33queue_directory = /var/spool/postfix 34 35# The command_directory parameter specifies the location of all 36# postXXX commands. 37# 38command_directory = /usr/sbin 39 40# The daemon_directory parameter specifies the location of all Postfix 41# daemon programs (i.e. programs listed in the master.cf file). This 42# directory must be owned by root. 43# 44daemon_directory = /usr/libexec/postfix 45 46# The data_directory parameter specifies the location of Postfix-writable 47# data files (caches, random numbers). This directory must be owned 48# by the mail_owner account (see below). 49# 50data_directory = /var/db/postfix 51 52# QUEUE AND PROCESS OWNERSHIP 53# 54# The mail_owner parameter specifies the owner of the Postfix queue 55# and of most Postfix daemon processes. Specify the name of a user 56# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS 57# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In 58# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED 59# USER. 60# 61mail_owner = postfix 62 63# The default_privs parameter specifies the default rights used by 64# the local delivery agent for delivery to external file or command. 65# These rights are used in the absence of a recipient user context. 66# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER. 67# 68#default_privs = nobody 69 70# INTERNET HOST AND DOMAIN NAMES 71# 72# The myhostname parameter specifies the internet hostname of this 73# mail system. The default is to use the fully-qualified domain name 74# from gethostname(). $myhostname is used as a default value for many 75# other configuration parameters. 76# 77#myhostname = host.domain.tld 78#myhostname = virtual.domain.tld 79 80# The mydomain parameter specifies the local internet domain name. 81# The default is to use $myhostname minus the first component. 82# $mydomain is used as a default value for many other configuration 83# parameters. 84# 85#mydomain = domain.tld 86 87# SENDING MAIL 88# 89# The myorigin parameter specifies the domain that locally-posted 90# mail appears to come from. The default is to append $myhostname, 91# which is fine for small sites. If you run a domain with multiple 92# machines, you should (1) change this to $mydomain and (2) set up 93# a domain-wide alias database that aliases each user to 94# user@that.users.mailhost. 95# 96# For the sake of consistency between sender and recipient addresses, 97# myorigin also specifies the default domain name that is appended 98# to recipient addresses that have no @domain part. 99# 100#myorigin = $myhostname 101#myorigin = $mydomain 102 103# RECEIVING MAIL 104 105# The inet_interfaces parameter specifies the network interface 106# addresses that this mail system receives mail on. By default, 107# the software claims all active interfaces on the machine. The 108# parameter also controls delivery of mail to user@[ip.address]. 109# 110# NOTE: On NetBSD, postfix does not listen on the network by default. 111# To enable inbound mail reception once your configuration is 112# ready, uncomment the smtp service in /etc/postfix/master.cf 113# 114# See also the proxy_interfaces parameter, for network addresses that 115# are forwarded to us via a proxy or network address translator. 116# 117# Note: you need to stop/start Postfix when this parameter changes. 118# 119#inet_interfaces = all 120#inet_interfaces = $myhostname 121#inet_interfaces = $myhostname, localhost 122 123# NetBSD is IPv6-capable. Use all available address families. 124# 125inet_protocols = all 126 127# The proxy_interfaces parameter specifies the network interface 128# addresses that this mail system receives mail on by way of a 129# proxy or network address translation unit. This setting extends 130# the address list specified with the inet_interfaces parameter. 131# 132# You must specify your proxy/NAT addresses when your system is a 133# backup MX host for other domains, otherwise mail delivery loops 134# will happen when the primary MX host is down. 135# 136#proxy_interfaces = 137#proxy_interfaces = 1.2.3.4 138 139# The mydestination parameter specifies the list of domains that this 140# machine considers itself the final destination for. 141# 142# These domains are routed to the delivery agent specified with the 143# local_transport parameter setting. By default, that is the UNIX 144# compatible delivery agent that lookups all recipients in /etc/passwd 145# and /etc/aliases or their equivalent. 146# 147# The default is $myhostname + localhost.$mydomain. On a mail domain 148# gateway, you should also include $mydomain. 149# 150# Do not specify the names of virtual domains - those domains are 151# specified elsewhere (see VIRTUAL_README). 152# 153# Do not specify the names of domains that this machine is backup MX 154# host for. Specify those names via the relay_domains settings for 155# the SMTP server, or use permit_mx_backup if you are lazy (see 156# STANDARD_CONFIGURATION_README). 157# 158# The local machine is always the final destination for mail addressed 159# to user@[the.net.work.address] of an interface that the mail system 160# receives mail on (see the inet_interfaces parameter). 161# 162# Specify a list of host or domain names, /file/name or type:table 163# patterns, separated by commas and/or whitespace. A /file/name 164# pattern is replaced by its contents; a type:table is matched when 165# a name matches a lookup key (the right-hand side is ignored). 166# Continue long lines by starting the next line with whitespace. 167# 168# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS". 169# 170#mydestination = $myhostname, localhost.$mydomain, localhost 171#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain 172#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, 173# mail.$mydomain, www.$mydomain, ftp.$mydomain 174 175# REJECTING MAIL FOR UNKNOWN LOCAL USERS 176# 177# The local_recipient_maps parameter specifies optional lookup tables 178# with all names or addresses of users that are local with respect 179# to $mydestination, $inet_interfaces or $proxy_interfaces. 180# 181# If this parameter is defined, then the SMTP server will reject 182# mail for unknown local users. This parameter is defined by default. 183# 184# To turn off local recipient checking in the SMTP server, specify 185# local_recipient_maps = (i.e. empty). 186# 187# The default setting assumes that you use the default Postfix local 188# delivery agent for local delivery. You need to update the 189# local_recipient_maps setting if: 190# 191# - You define $mydestination domain recipients in files other than 192# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files. 193# For example, you define $mydestination domain recipients in 194# the $virtual_mailbox_maps files. 195# 196# - You redefine the local delivery agent in master.cf. 197# 198# - You redefine the "local_transport" setting in main.cf. 199# 200# - You use the "luser_relay", "mailbox_transport", or "fallback_transport" 201# feature of the Postfix local delivery agent (see local(8)). 202# 203# Details are described in the LOCAL_RECIPIENT_README file. 204# 205# Beware: if the Postfix SMTP server runs chrooted, you probably have 206# to access the passwd file via the proxymap service, in order to 207# overcome chroot restrictions. The alternative, having a copy of 208# the system passwd file in the chroot jail is just not practical. 209# 210# The right-hand side of the lookup tables is conveniently ignored. 211# In the left-hand side, specify a bare username, an @domain.tld 212# wild-card, or specify a user@domain.tld address. 213# 214#local_recipient_maps = unix:passwd.byname $alias_maps 215#local_recipient_maps = proxy:unix:passwd.byname $alias_maps 216#local_recipient_maps = 217 218# The unknown_local_recipient_reject_code specifies the SMTP server 219# response code when a recipient domain matches $mydestination or 220# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty 221# and the recipient address or address local-part is not found. 222# 223# The default setting is 550 (reject mail) but it is safer to start 224# with 450 (try again later) until you are certain that your 225# local_recipient_maps settings are OK. 226# 227unknown_local_recipient_reject_code = 550 228 229# TRUST AND RELAY CONTROL 230 231# The mynetworks parameter specifies the list of "trusted" SMTP 232# clients that have more privileges than "strangers". 233# 234# In particular, "trusted" SMTP clients are allowed to relay mail 235# through Postfix. See the smtpd_recipient_restrictions parameter 236# in postconf(5). 237# 238# You can specify the list of "trusted" network addresses by hand 239# or you can let Postfix do it for you (which is the default). 240# 241# By default (mynetworks_style = subnet), Postfix "trusts" SMTP 242# clients in the same IP subnetworks as the local machine. 243# On Linux, this does works correctly only with interfaces specified 244# with the "ifconfig" command. 245# 246# Specify "mynetworks_style = class" when Postfix should "trust" SMTP 247# clients in the same IP class A/B/C networks as the local machine. 248# Don't do this with a dialup site - it would cause Postfix to "trust" 249# your entire provider's network. Instead, specify an explicit 250# mynetworks list by hand, as described below. 251# 252# Specify "mynetworks_style = host" when Postfix should "trust" 253# only the local machine. 254# 255#mynetworks_style = class 256#mynetworks_style = subnet 257#mynetworks_style = host 258 259# Alternatively, you can specify the mynetworks list by hand, in 260# which case Postfix ignores the mynetworks_style setting. 261# 262# Specify an explicit list of network/netmask patterns, where the 263# mask specifies the number of bits in the network part of a host 264# address. 265# 266# You can also specify the absolute pathname of a pattern file instead 267# of listing the patterns here. Specify type:table for table-based lookups 268# (the value on the table right-hand side is not used). 269# 270#mynetworks = 168.100.189.0/28, 127.0.0.0/8 271#mynetworks = $config_directory/mynetworks 272#mynetworks = hash:/etc/postfix/network_table 273 274# The relay_domains parameter restricts what destinations this system will 275# relay mail to. See the smtpd_recipient_restrictions description in 276# postconf(5) for detailed information. 277# 278# By default, Postfix relays mail 279# - from "trusted" clients (IP address matches $mynetworks) to any destination, 280# - from "untrusted" clients to destinations that match $relay_domains or 281# subdomains thereof, except addresses with sender-specified routing. 282# The default relay_domains value is $mydestination. 283# 284# In addition to the above, the Postfix SMTP server by default accepts mail 285# that Postfix is final destination for: 286# - destinations that match $inet_interfaces or $proxy_interfaces, 287# - destinations that match $mydestination 288# - destinations that match $virtual_alias_domains, 289# - destinations that match $virtual_mailbox_domains. 290# These destinations do not need to be listed in $relay_domains. 291# 292# Specify a list of hosts or domains, /file/name patterns or type:name 293# lookup tables, separated by commas and/or whitespace. Continue 294# long lines by starting the next line with whitespace. A file name 295# is replaced by its contents; a type:name table is matched when a 296# (parent) domain appears as lookup key. 297# 298# NOTE: Postfix will not automatically forward mail for domains that 299# list this system as their primary or backup MX host. See the 300# permit_mx_backup restriction description in postconf(5). 301# 302#relay_domains = $mydestination 303 304# INTERNET OR INTRANET 305 306# The relayhost parameter specifies the default host to send mail to 307# when no entry is matched in the optional transport(5) table. When 308# no relayhost is given, mail is routed directly to the destination. 309# 310# On an intranet, specify the organizational domain name. If your 311# internal DNS uses no MX records, specify the name of the intranet 312# gateway host instead. 313# 314# In the case of SMTP, specify a domain, host, host:port, [host]:port, 315# [address] or [address]:port; the form [host] turns off MX lookups. 316# 317# If you're connected via UUCP, see also the default_transport parameter. 318# 319#relayhost = $mydomain 320#relayhost = [gateway.my.domain] 321#relayhost = [mailserver.isp.tld] 322#relayhost = uucphost 323#relayhost = [an.ip.add.ress] 324 325# REJECTING UNKNOWN RELAY USERS 326# 327# The relay_recipient_maps parameter specifies optional lookup tables 328# with all addresses in the domains that match $relay_domains. 329# 330# If this parameter is defined, then the SMTP server will reject 331# mail for unknown relay users. This feature is off by default. 332# 333# The right-hand side of the lookup tables is conveniently ignored. 334# In the left-hand side, specify an @domain.tld wild-card, or specify 335# a user@domain.tld address. 336# 337#relay_recipient_maps = hash:/etc/postfix/relay_recipients 338 339# INPUT RATE CONTROL 340# 341# The in_flow_delay configuration parameter implements mail input 342# flow control. This feature is turned on by default, although it 343# still needs further development (it's disabled on SCO UNIX due 344# to an SCO bug). 345# 346# A Postfix process will pause for $in_flow_delay seconds before 347# accepting a new message, when the message arrival rate exceeds the 348# message delivery rate. With the default 100 SMTP server process 349# limit, this limits the mail inflow to 100 messages a second more 350# than the number of messages delivered per second. 351# 352# Specify 0 to disable the feature. Valid delays are 0..10. 353# 354#in_flow_delay = 1s 355 356# ADDRESS REWRITING 357# 358# The ADDRESS_REWRITING_README document gives information about 359# address masquerading or other forms of address rewriting including 360# username->Firstname.Lastname mapping. 361 362# ADDRESS REDIRECTION (VIRTUAL DOMAIN) 363# 364# The VIRTUAL_README document gives information about the many forms 365# of domain hosting that Postfix supports. 366 367# "USER HAS MOVED" BOUNCE MESSAGES 368# 369# See the discussion in the ADDRESS_REWRITING_README document. 370 371# TRANSPORT MAP 372# 373# See the discussion in the ADDRESS_REWRITING_README document. 374 375# ALIAS DATABASE 376# 377# The alias_maps parameter specifies the list of alias databases used 378# by the local delivery agent. The default list is system dependent. 379# 380# On systems with NIS, the default is to search the local alias 381# database, then the NIS alias database. See aliases(5) for syntax 382# details. 383# 384# If you change the alias database, run "postalias /etc/aliases" (or 385# wherever your system stores the mail alias file), or simply run 386# "newaliases" to build the necessary DBM or DB file. 387# 388# It will take a minute or so before changes become visible. Use 389# "postfix reload" to eliminate the delay. 390# 391#alias_maps = dbm:/etc/aliases 392#alias_maps = hash:/etc/aliases 393#alias_maps = hash:/etc/aliases, nis:mail.aliases 394#alias_maps = netinfo:/aliases 395 396# The alias_database parameter specifies the alias database(s) that 397# are built with "newaliases" or "sendmail -bi". This is a separate 398# configuration parameter, because alias_maps (see above) may specify 399# tables that are not necessarily all under control by Postfix. 400# 401#alias_database = dbm:/etc/aliases 402#alias_database = dbm:/etc/mail/aliases 403#alias_database = hash:/etc/aliases 404#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases 405 406# ADDRESS EXTENSIONS (e.g., user+foo) 407# 408# The recipient_delimiter parameter specifies the separator between 409# user names and address extensions (user+foo). See canonical(5), 410# local(8), relocated(5) and virtual(5) for the effects this has on 411# aliases, canonical, virtual, relocated and .forward file lookups. 412# Basically, the software tries user+foo and .forward+foo before 413# trying user and .forward. 414# 415#recipient_delimiter = + 416 417# DELIVERY TO MAILBOX 418# 419# The home_mailbox parameter specifies the optional pathname of a 420# mailbox file relative to a user's home directory. The default 421# mailbox file is /var/spool/mail/user or /var/mail/user. Specify 422# "Maildir/" for qmail-style delivery (the / is required). 423# 424#home_mailbox = Mailbox 425#home_mailbox = Maildir/ 426 427# The mail_spool_directory parameter specifies the directory where 428# UNIX-style mailboxes are kept. The default setting depends on the 429# system type. 430# 431#mail_spool_directory = /var/mail 432#mail_spool_directory = /var/spool/mail 433 434# The mailbox_command parameter specifies the optional external 435# command to use instead of mailbox delivery. The command is run as 436# the recipient with proper HOME, SHELL and LOGNAME environment settings. 437# Exception: delivery for root is done as $default_user. 438# 439# Other environment variables of interest: USER (recipient username), 440# EXTENSION (address extension), DOMAIN (domain part of address), 441# and LOCAL (the address localpart). 442# 443# Unlike other Postfix configuration parameters, the mailbox_command 444# parameter is not subjected to $parameter substitutions. This is to 445# make it easier to specify shell syntax (see example below). 446# 447# Avoid shell meta characters because they will force Postfix to run 448# an expensive shell process. Procmail alone is expensive enough. 449# 450# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN 451# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER. 452# 453#mailbox_command = /some/where/procmail 454#mailbox_command = /some/where/procmail -a "$EXTENSION" 455 456# The mailbox_transport specifies the optional transport in master.cf 457# to use after processing aliases and .forward files. This parameter 458# has precedence over the mailbox_command, fallback_transport and 459# luser_relay parameters. 460# 461# Specify a string of the form transport:nexthop, where transport is 462# the name of a mail delivery transport defined in master.cf. The 463# :nexthop part is optional. For more details see the sample transport 464# configuration file. 465# 466# NOTE: if you use this feature for accounts not in the UNIX password 467# file, then you must update the "local_recipient_maps" setting in 468# the main.cf file, otherwise the SMTP server will reject mail for 469# non-UNIX accounts with "User unknown in local recipient table". 470# 471# Cyrus IMAP over LMTP. Specify ``lmtpunix cmd="lmtpd" 472# listen="/var/imap/socket/lmtp" prefork=0'' in cyrus.conf. 473#mailbox_transport = lmtp:unix:/var/imap/socket/lmtp 474# 475# Cyrus IMAP via command line. Uncomment the "cyrus...pipe" and 476# subsequent line in master.cf. 477#mailbox_transport = cyrus 478 479# The fallback_transport specifies the optional transport in master.cf 480# to use for recipients that are not found in the UNIX passwd database. 481# This parameter has precedence over the luser_relay parameter. 482# 483# Specify a string of the form transport:nexthop, where transport is 484# the name of a mail delivery transport defined in master.cf. The 485# :nexthop part is optional. For more details see the sample transport 486# configuration file. 487# 488# NOTE: if you use this feature for accounts not in the UNIX password 489# file, then you must update the "local_recipient_maps" setting in 490# the main.cf file, otherwise the SMTP server will reject mail for 491# non-UNIX accounts with "User unknown in local recipient table". 492# 493#fallback_transport = lmtp:unix:/file/name 494#fallback_transport = cyrus 495#fallback_transport = 496 497# The luser_relay parameter specifies an optional destination address 498# for unknown recipients. By default, mail for unknown@$mydestination, 499# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned 500# as undeliverable. 501# 502# The following expansions are done on luser_relay: $user (recipient 503# username), $shell (recipient shell), $home (recipient home directory), 504# $recipient (full recipient address), $extension (recipient address 505# extension), $domain (recipient domain), $local (entire recipient 506# localpart), $recipient_delimiter. Specify ${name?value} or 507# ${name:value} to expand value only when $name does (does not) exist. 508# 509# luser_relay works only for the default Postfix local delivery agent. 510# 511# NOTE: if you use this feature for accounts not in the UNIX password 512# file, then you must specify "local_recipient_maps =" (i.e. empty) in 513# the main.cf file, otherwise the SMTP server will reject mail for 514# non-UNIX accounts with "User unknown in local recipient table". 515# 516#luser_relay = $user@other.host 517#luser_relay = $local@other.host 518#luser_relay = admin+$local 519 520# JUNK MAIL CONTROLS 521# 522# The controls listed here are only a very small subset. The file 523# SMTPD_ACCESS_README provides an overview. 524 525# The header_checks parameter specifies an optional table with patterns 526# that each logical message header is matched against, including 527# headers that span multiple physical lines. 528# 529# By default, these patterns also apply to MIME headers and to the 530# headers of attached messages. With older Postfix versions, MIME and 531# attached message headers were treated as body text. 532# 533# For details, see "man header_checks". 534# 535#header_checks = regexp:/etc/postfix/header_checks 536 537# FAST ETRN SERVICE 538# 539# Postfix maintains per-destination logfiles with information about 540# deferred mail, so that mail can be flushed quickly with the SMTP 541# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld". 542# See the ETRN_README document for a detailed description. 543# 544# The fast_flush_domains parameter controls what destinations are 545# eligible for this service. By default, they are all domains that 546# this server is willing to relay mail to. 547# 548#fast_flush_domains = $relay_domains 549 550# SHOW SOFTWARE VERSION OR NOT 551# 552# The smtpd_banner parameter specifies the text that follows the 220 553# code in the SMTP server's greeting banner. Some people like to see 554# the mail version advertised. By default, Postfix shows no version. 555# 556# You MUST specify $myhostname at the start of the text. That is an 557# RFC requirement. Postfix itself does not care. 558# 559#smtpd_banner = $myhostname ESMTP $mail_name 560#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) 561 562# PARALLEL DELIVERY TO THE SAME DESTINATION 563# 564# How many parallel deliveries to the same user or domain? With local 565# delivery, it does not make sense to do massively parallel delivery 566# to the same user, because mailbox updates must happen sequentially, 567# and expensive pipelines in .forward files can cause disasters when 568# too many are run at the same time. With SMTP deliveries, 10 569# simultaneous connections to the same domain could be sufficient to 570# raise eyebrows. 571# 572# Each message delivery transport has its XXX_destination_concurrency_limit 573# parameter. The default is $default_destination_concurrency_limit for 574# most delivery transports. For the local delivery agent the default is 2. 575 576#local_destination_concurrency_limit = 2 577#default_destination_concurrency_limit = 20 578 579# DEBUGGING CONTROL 580# 581# The debug_peer_level parameter specifies the increment in verbose 582# logging level when an SMTP client or server host name or address 583# matches a pattern in the debug_peer_list parameter. 584# 585debug_peer_level = 2 586 587# The debug_peer_list parameter specifies an optional list of domain 588# or network patterns, /file/name patterns or type:name tables. When 589# an SMTP client or server host name or address matches a pattern, 590# increase the verbose logging level by the amount specified in the 591# debug_peer_level parameter. 592# 593#debug_peer_list = 127.0.0.1 594#debug_peer_list = some.domain 595 596# The debugger_command specifies the external command that is executed 597# when a Postfix daemon program is run with the -D option. 598# 599# Use "command .. & sleep 5" so that the debugger can attach before 600# the process marches on. If you use an X-based debugger, be sure to 601# set up your XAUTHORITY environment variable before starting Postfix. 602# 603debugger_command = 604 PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin 605 ddd $daemon_directory/$process_name $process_id & sleep 5 606 607# If you can't use X, use this to capture the call stack when a 608# daemon crashes. The result is in a file in the configuration 609# directory, and is named after the process name and the process ID. 610# 611# debugger_command = 612# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; 613# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 614# >$config_directory/$process_name.$process_id.log & sleep 5 615# 616# Another possibility is to run gdb under a detached screen session. 617# To attach to the screen sesssion, su root and run "screen -r 618# <id_string>" where <id_string> uniquely matches one of the detached 619# sessions (from "screen -list"). 620# 621# debugger_command = 622# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen 623# -dmS $process_name gdb $daemon_directory/$process_name 624# $process_id & sleep 1 625 626# INSTALL-TIME CONFIGURATION INFORMATION 627# 628# The following parameters are used when installing a new Postfix version. 629# 630# sendmail_path: The full pathname of the Postfix sendmail command. 631# This is the Sendmail-compatible mail posting interface. 632# 633sendmail_path = /usr/sbin/sendmail 634 635# newaliases_path: The full pathname of the Postfix newaliases command. 636# This is the Sendmail-compatible command to build alias databases. 637# 638newaliases_path = /usr/bin/newaliases 639 640# mailq_path: The full pathname of the Postfix mailq command. This 641# is the Sendmail-compatible mail queue listing command. 642# 643mailq_path = /usr/bin/mailq 644 645# setgid_group: The group for mail submission and queue management 646# commands. This must be a group name with a numerical group ID that 647# is not shared with other accounts, not even with the Postfix account. 648# 649setgid_group = maildrop 650 651# html_directory: The location of the Postfix HTML documentation. 652# 653html_directory = /usr/share/doc/html/postfix 654 655# manpage_directory: The location of the Postfix on-line manual pages. 656# 657manpage_directory = /usr/share/man 658 659# sample_directory: The location of the Postfix sample configuration files. 660# This parameter is obsolete as of Postfix 2.1. 661# 662sample_directory = /usr/share/examples/postfix 663 664# readme_directory: The location of the Postfix README files. 665# 666readme_directory = /usr/share/examples/postfix 667#inet_protocols = ipv4 668