1# Makefile fragment for common parts of all simulators.
2# Copyright 1997-2020 Free Software Foundation, Inc.
3# Contributed by Cygnus Support.
4
5# This program is free software; you can redistribute it and/or modify
6# it under the terms of the GNU General Public License as published by
7# the Free Software Foundation; either version 3 of the License, or
8# (at your option) any later version.
9#
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY; without even the implied warranty of
12# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13# GNU General Public License for more details.
14#
15# You should have received a copy of the GNU General Public License
16# along with this program.  If not, see <http://www.gnu.org/licenses/>.
17
18# This Makefile fragment consists of two separate parts.
19# They are merged into the final Makefile at points denoted by
20# "## COMMON_PRE_CONFIG_FRAG" and "## COMMON_POST_CONFIG_FRAG".
21#
22# The target Makefile should look like:
23#
24#># Copyright blah blah
25#>
26#>## COMMON_PRE_CONFIG_FRAG
27#>
28#># Any overrides necessary for the SIM_FOO config vars.
29#>SIM_FOO = ...
30#>
31#>## COMMON_POST_CONFIG_FRAG
32#>
33#># Rules to build target specific .o's.
34
35## COMMON_PRE_CONFIG_FRAG
36
37VPATH = @srcdir@:$(srccom)
38srcdir = @srcdir@
39srccom = $(srcdir)/../common
40srcroot = $(srcdir)/../..
41srcsim = $(srcdir)/..
42
43prefix = @prefix@
44exec_prefix = @exec_prefix@
45
46host_alias = @host_alias@
47target_alias = @target_alias@
48program_transform_name = @program_transform_name@
49bindir = @bindir@
50
51libdir = @libdir@
52tooldir = $(libdir)/$(target_alias)
53
54datadir = @datadir@
55datarootdir = @datarootdir@
56mandir = @mandir@
57man1dir = $(mandir)/man1
58infodir = @infodir@
59includedir = @includedir@
60
61lt_cv_dlopen_libs = @lt_cv_dlopen_libs@
62# This can be referenced by the gettext configuration code.
63top_builddir = ..
64
65EXEEXT = @EXEEXT@
66SHELL = @SHELL@
67
68INSTALL = @INSTALL@
69INSTALL_PROGRAM = @INSTALL_PROGRAM@
70INSTALL_DATA = @INSTALL_DATA@
71
72CC = @CC@
73CC_FOR_BUILD = @CC_FOR_BUILD@
74CFLAGS = @CFLAGS@
75CPPFLAGS = @CPPFLAGS@
76CXXFLAGS = @CXXFLAGS@
77LDFLAGS = @LDFLAGS@
78
79SIM_ALIGNMENT = @sim_alignment@
80SIM_BITSIZE = @sim_bitsize@
81SIM_DEFAULT_MODEL = @sim_default_model@
82SIM_ENDIAN = @sim_endian@
83SIM_FLOAT = @sim_float@
84SIM_HW_CFLAGS = @sim_hw_cflags@
85SIM_HW_OBJS = @sim_hw_objs@
86SIM_HW = @sim_hw@
87SIM_INLINE = @sim_inline@
88SIM_RESERVED_BITS = @sim_reserved_bits@
89SIM_SCACHE = @sim_scache@
90WARN_CFLAGS = @WARN_CFLAGS@
91WERROR_CFLAGS = @WERROR_CFLAGS@
92SIM_WARN_CFLAGS = $(WARN_CFLAGS)
93SIM_WERROR_CFLAGS = $(WERROR_CFLAGS)
94
95HDEFINES = @HDEFINES@
96TDEFINES =
97
98AR = @AR@
99AR_FLAGS = rc
100RANLIB = @RANLIB@
101MAKEINFO = makeinfo
102
103# Dependency tracking information.
104DEPMODE = @CCDEPMODE@
105DEPDIR = @DEPDIR@
106depcomp = $(SHELL) $(srcroot)/depcomp
107
108# Note that these are overridden by GNU make-specific code below if
109# GNU make is used.  The overrides implement dependency tracking.
110COMPILE.pre = $(CC)
111COMPILE.post = -c -o $@
112COMPILE = $(COMPILE.pre) $(ALL_CFLAGS) $(COMPILE.post)
113POSTCOMPILE = @true
114
115# Each simulator's Makefile.in defines one or more of these variables
116# to override our settings as necessary.  There is no need to define these
117# in the simulator's Makefile.in if one is using the default value.  In fact
118# it's preferable not to.
119
120# List of object files, less common parts.
121SIM_OBJS =
122# List of extra dependencies.
123# Generally this consists of simulator specific files included by sim-main.h.
124SIM_EXTRA_DEPS =
125# List of flags to always pass to $(CC).
126SIM_EXTRA_CFLAGS =
127# List of extra libraries to link with.
128SIM_EXTRA_LIBS =
129# List of extra program dependencies.
130SIM_EXTRA_LIBDEPS =
131# List of main object files for `run'.
132SIM_RUN_OBJS = nrun.o
133# Dependency of `all' to build any extra files.
134SIM_EXTRA_ALL =
135# Dependency of `install' to install any extra files.
136SIM_EXTRA_INSTALL =
137# Dependency of `clean' to clean any extra files.
138SIM_EXTRA_CLEAN =
139# Likewise `distclean'
140SIM_EXTRA_DISTCLEAN =
141
142# Every time a new general purpose source file was added every target's
143# Makefile.in needed to be updated to include the file in SIM_OBJS.
144# This doesn't scale.
145# This variable specifies all the generic stuff common to the newer simulators.
146# Things like sim-reason.o can't go here as the cpu may provide its own
147# (though hopefully in time that won't be so).  Things like sim-bits.o can go
148# here.  Some files are used by all simulators (e.g. callback.o).
149# Those files are specified in LIB_OBJS below.
150
151SIM_COMMON_HW_OBJS = \
152	hw-alloc.o \
153	hw-base.o \
154	hw-device.o \
155	hw-events.o \
156	hw-handles.o \
157	hw-instances.o \
158	hw-ports.o \
159	hw-properties.o \
160	hw-tree.o \
161	sim-hw.o \
162
163SIM_NEW_COMMON_OBJS = \
164	sim-arange.o \
165	sim-bits.o \
166	sim-close.o \
167	sim-command.o \
168	sim-config.o \
169	sim-core.o \
170	sim-cpu.o \
171	sim-endian.o \
172	sim-engine.o \
173	sim-events.o \
174	sim-fpu.o \
175	sim-hload.o \
176	sim-hrw.o \
177	sim-io.o \
178	sim-info.o \
179	sim-load.o \
180	sim-memopt.o \
181	sim-model.o \
182	sim-module.o \
183	sim-options.o \
184	sim-profile.o \
185	sim-reason.o \
186	sim-reg.o \
187	sim-signal.o \
188	sim-stop.o \
189	sim-syscall.o \
190	sim-trace.o \
191	sim-utils.o \
192	sim-watch.o \
193	\
194	$(SIM_HW_OBJS) \
195
196# cgen-sim.h and the headers it includes
197CGEN_SIM_DEPS = \
198	$(srccom)/cgen-sim.h \
199	$(srccom)/cgen-defs.h \
200	$(srccom)/cgen-scache.h \
201	$(srccom)/cgen-fpu.h \
202	$(srccom)/cgen-par.h \
203	$(srccom)/cgen-cpu.h \
204	$(srccom)/cgen-trace.h \
205	cpuall.h
206
207# Add this to SIM_EXTRA_DEPS.
208CGEN_INCLUDE_DEPS = \
209	$(CGEN_SIM_DEPS) \
210	$(srccom)/cgen-engine.h \
211	$(srccom)/cgen-types.h \
212	$(srcdir)/../../include/opcode/cgen.h
213
214## End COMMON_PRE_CONFIG_FRAG
215
216## COMMON_POST_CONFIG_FRAG
217
218CONFIG_CFLAGS = \
219	@DEFS@ \
220	$(SIM_DEFAULT_MODEL) \
221	$(SIM_ALIGNMENT) \
222	$(SIM_BITSIZE) \
223	$(SIM_ENDIAN) \
224	$(SIM_FLOAT) \
225	$(SIM_HW_CFLAGS) \
226	$(SIM_INLINE) \
227	$(SIM_RESERVED_BITS) \
228	$(SIM_SCACHE) \
229	$(SIM_WARN_CFLAGS) \
230	$(SIM_WERROR_CFLAGS) \
231	$(SIM_HARDWARE) \
232	$(SIM_EXTRA_CFLAGS) \
233	$(HDEFINES) $(TDEFINES)
234CSEARCH = -I. -I$(srcdir) -I../common -I$(srccom) \
235  -I../../include -I$(srcroot)/include \
236  -I../../bfd -I$(srcroot)/bfd \
237  -I../../opcodes -I$(srcroot)/opcodes \
238  @INCINTL@
239ALL_CFLAGS = $(CONFIG_CFLAGS) $(CSEARCH) $(CFLAGS)
240BUILD_CFLAGS = -g -O $(CSEARCH)
241
242COMMON_DEP_CFLAGS = $(CONFIG_CFLAGS) $(CSEARCH)
243
244ZLIB = @zlibdir@ -lz
245LIBIBERTY_LIB = ../../libiberty/libiberty.a
246BFD_LIB = ../../bfd/libbfd.a
247@PLUGINS_TRUE@LIBDL = @lt_cv_dlopen_libs@
248OPCODES_LIB = ../../opcodes/libopcodes.a
249LIBINTL = @LIBINTL@
250LIBINTL_DEP = @LIBINTL_DEP@
251CONFIG_LIBS = @LIBS@ $(ZLIB)
252LIBDEPS = $(BFD_LIB) $(OPCODES_LIB) $(LIBINTL_DEP) $(LIBIBERTY_LIB) \
253	$(SIM_EXTRA_LIBDEPS)
254EXTRA_LIBS = $(BFD_LIB) $(OPCODES_LIB) $(LIBINTL) $(LIBIBERTY_LIB) \
255	$(CONFIG_LIBS) $(SIM_EXTRA_LIBS) $(LIBDL)
256
257LIB_OBJS = callback.o syscall.o targ-map.o version.o $(SIM_OBJS)
258
259RUNTESTFLAGS =
260
261callback_h = $(srcroot)/include/gdb/callback.h
262remote_sim_h = $(srcroot)/include/gdb/remote-sim.h
263
264all: $(SIM_EXTRA_ALL) libsim.a run$(EXEEXT) .gdbinit
265
266libsim.a: $(LIB_OBJS)
267	rm -f libsim.a
268	$(AR) $(AR_FLAGS) libsim.a $(LIB_OBJS)
269	$(RANLIB) libsim.a
270
271run$(EXEEXT): $(SIM_RUN_OBJS) libsim.a $(LIBDEPS)
272	$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o run$(EXEEXT) \
273	  $(SIM_RUN_OBJS) libsim.a $(EXTRA_LIBS)
274
275# FIXME: Ideally, callback.o and friends live in a library outside of
276# both the gdb and simulator source trees (e.g. devo/remote.  Not
277# devo/libremote because this directory would contain more than just
278# a library).
279
280gentmap: Makefile $(srccom)/gentmap.c $(srccom)/nltvals.def
281	$(CC_FOR_BUILD) $(srccom)/gentmap.c -o gentmap $(BUILD_CFLAGS) $(NL_TARGET)
282
283targ-vals.h targ-map.c: stamp-tvals
284stamp-tvals: gentmap
285	rm -f tmp-tvals.h tmp-tmap.c
286	./gentmap -h >tmp-tvals.h
287	$(SHELL) $(srcroot)/move-if-change tmp-tvals.h targ-vals.h
288	./gentmap -c >tmp-tmap.c
289	$(SHELL) $(srcroot)/move-if-change tmp-tmap.c targ-map.c
290	touch stamp-tvals
291
292version.c: Makefile $(srcroot)/gdb/version.in $(srcroot)/bfd/version.h $(srcroot)/sim/common/create-version.sh
293	$(SHELL) $(srcroot)/sim/common/create-version.sh $(srcroot)/gdb \
294	    $(host_alias) $(target_alias) version.c
295
296#
297# Rules for building sim-* components.  Triggered by listing the corresponding
298# .o file in the list of simulator targets.
299#
300
301sim_main_headers = \
302	sim-main.h \
303	$(sim-assert_h) \
304	$(sim-base_h) \
305	$(sim-cpu_h) \
306	$(sim-engine_h) \
307	$(sim-events_h) \
308	$(sim-memopt_h) \
309	$(sim-model_h) \
310	$(sim-module_h) \
311	$(sim-profile_h) \
312	$(sim-trace_h) \
313	$(sim-watch_h) \
314	$(sim-basics_h) \
315	$(SIM_EXTRA_DEPS)
316
317# Exported version of sim_main_headers.
318SIM_MAIN_DEPS = \
319	$(sim_main_headers)
320
321sim-alu_h = $(srccom)/sim-alu.h
322sim-arange_h = $(srccom)/sim-arange.h
323sim-assert_h = $(srccom)/sim-assert.h
324sim-base_h = $(srccom)/sim-base.h \
325		$(sim-module_h) \
326		$(sim-trace_h) \
327		$(sim-core_h) \
328		$(sim-events_h) \
329		$(sim-profile_h) \
330		$(sim-model_h) \
331		$(sim-io_h) \
332		$(sim-engine_h) \
333		$(sim-watch_h) \
334		$(sim-memopt_h) \
335		$(sim-cpu_h)
336sim-basics_h = $(srccom)/sim-basics.h \
337		$(sim-config_h) \
338		$(callback_h) \
339		$(sim-inline_h) \
340		$(sim-types_h) \
341		$(sim-bits_h) \
342		$(sim-endian_h) \
343		$(sim-signal_h) \
344		$(sim-arange_h) \
345		$(sim-utils_h)
346sim-bits_h = $(srccom)/sim-bits.h \
347		$(srccom)/sim-bits.c
348sim-config_h = $(srccom)/sim-config.h
349sim-core_h = $(srccom)/sim-core.h
350sim-cpu_h = $(srccom)/sim-cpu.h
351sim-endian_h = $(srccom)/sim-endian.h \
352		$(srccom)/sim-endian.c
353sim-engine_h = $(srccom)/sim-engine.h
354sim-events_h = $(srccom)/sim-events.h
355sim-fpu_h = $(srccom)/sim-fpu.h
356sim-hw_h = $(srccom)/sim-hw.h
357sim-inline_h = $(srccom)/sim-inline.h
358sim-io_h = $(srccom)/sim-io.h
359sim-memopt_h = $(srccom)/sim-memopt.h
360sim-model_h = $(srccom)/sim-model.h
361sim-module_h = $(srccom)/sim-module.h
362sim-n-bits_h = $(srccom)/sim-n-bits.h
363sim-n-core_h = $(srccom)/sim-n-core.h
364sim-n-endian_h = $(srccom)/sim-n-endian.h
365sim-options_h = $(srccom)/sim-options.h
366sim-profile_h = $(srccom)/sim-profile.h
367sim-signal_h = $(srccom)/sim-signal.h
368sim-trace_h = $(srccom)/sim-trace.h
369sim-types_h = $(srccom)/sim-types.h
370sim-utils_h = $(srccom)/sim-utils.h
371sim-watch_h = $(srccom)/sim-watch.h
372
373hw-alloc_h = $(srccom)/hw-alloc.h
374hw-base_h = $(srccom)/hw-base.h
375hw-device_h = $(srccom)/hw-device.h
376hw-events_h = $(srccom)/hw-events.h
377hw-handles_h = $(srccom)/hw-handles.h
378hw-instances_h = $(srccom)/hw-instances.h
379hw-ports_h = $(srccom)/hw-ports.h
380hw-properties_h = $(srccom)/hw-properties.h
381hw-tree_h = $(srccom)/hw-tree.h
382
383hw_main_headers = \
384	$(srccom)/hw-main.h \
385	$(hw-alloc_h) \
386	$(hw-base_h) \
387	$(hw-device_h) \
388	$(hw-events_h) \
389	$(hw-instances_h) \
390	$(hw-handles_h) \
391	$(hw-ports_h) \
392	$(hw-properties_h) \
393
394#
395# Dependency tracking.  Most of this is conditional on GNU Make being
396# found by configure; if GNU Make is not found, we fall back to a
397# simpler scheme.
398#
399
400@GMAKE_TRUE@ifeq ($(DEPMODE),depmode=gcc3)
401# Note that we put the dependencies into a .Tpo file, then move them
402# into place if the compile succeeds.  We need this because gcc does
403# not atomically write the dependency output file.
404@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
405@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
406@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
407@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
408@GMAKE_TRUE@else
409@GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
410@GMAKE_TRUE@	DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
411# depcomp handles atomicity for us, so we don't need a postcompile
412# step.
413@GMAKE_TRUE@override POSTCOMPILE =
414@GMAKE_TRUE@endif
415
416all_object_files = $(LIB_OBJS) $(SIM_RUN_OBJS)
417generated_files = \
418	$(SIM_EXTRA_DEPS) \
419	hw-config.h \
420	targ-map.c \
421	targ-vals.h \
422	version.c
423
424# Ensure that generated files are created early.  Use order-only
425# dependencies if available.  They require GNU make 3.80 or newer,
426# and the .VARIABLES variable was introduced at the same time.
427@GMAKE_TRUE@ifdef .VARIABLES
428@GMAKE_TRUE@$(all_object_files): | $(generated_files)
429@GMAKE_TRUE@else
430$(all_object_files) : $(generated_files)
431@GMAKE_TRUE@endif
432
433# Dependencies.
434@GMAKE_TRUE@-include $(patsubst %.o, $(DEPDIR)/%.Po, $(all_object_files))
435
436# FIXME This is one very simple-minded way of generating the file hw-config.h
437hw-config.h: Makefile.in $(srccom)/Make-common.in config.status Makefile
438	rm -f tmp-hw.h
439	echo "/* generated by Makefile */" > tmp-hw.h
440	sim_hw="$(SIM_HW)"; \
441	for hw in $$sim_hw ; do \
442	  echo "extern const struct hw_descriptor dv_$${hw}_descriptor[];" ; \
443	done >> tmp-hw.h
444	echo "const struct hw_descriptor *hw_descriptors[] = {" >> tmp-hw.h
445	sim_hw="$(SIM_HW)"; \
446	for hw in $$sim_hw ; do \
447	  echo "  dv_$${hw}_descriptor," ; \
448	done >> tmp-hw.h
449	echo "  NULL," >> tmp-hw.h
450	echo "};" >> tmp-hw.h
451	mv tmp-hw.h hw-config.h
452
453test-hw-events: $(srccom)/hw-events.c libsim.a
454	$(CC) $(ALL_CFLAGS) -DMAIN -o test-hw-events$(EXEEXT) \
455		$(srccom)/hw-events.c libsim.a $(EXTRA_LIBS)
456
457# CGEN support.
458
459# For use in Makefile.in for cpu-specific files.
460CGEN_MAIN_CPU_DEPS = \
461	$(SIM_MAIN_DEPS) \
462	$(srccom)/cgen-ops.h \
463	$(srccom)/cgen-mem.h
464
465# Support targets.
466
467install: install-common $(SIM_EXTRA_INSTALL)
468
469install-common: installdirs
470	n=`echo run | sed '$(program_transform_name)'`; \
471	$(INSTALL_PROGRAM) run$(EXEEXT) $(DESTDIR)$(bindir)/$$n$(EXEEXT)
472	n=`echo libsim.a | sed s/libsim.a/lib$(target_alias)-sim.a/`; \
473	$(INSTALL_DATA) libsim.a $(DESTDIR)$(libdir)/$$n ; \
474	( cd $(DESTDIR)$(libdir) ; $(RANLIB) $$n )
475
476installdirs:
477	$(SHELL) $(srcdir)/../../mkinstalldirs $(DESTDIR)$(bindir)
478	$(SHELL) $(srcdir)/../../mkinstalldirs $(DESTDIR)$(libdir)
479
480check:
481	cd ../testsuite && $(MAKE) check RUNTESTFLAGS="$(RUNTESTFLAGS)"
482
483info:
484clean-info:
485install-info:
486
487.NOEXPORT:
488MAKEOVERRIDES=
489
490tags etags: TAGS
491
492# Macros like EXTERN_SIM_CORE confuse tags.
493# And the sim-n-foo.h files create functions that can't be found either.
494TAGS: force
495	cd $(srcdir) && \
496	etags --regex '/^\([[:lower:]_]+\) (/\1/' --regex '/^\/[*] TAGS: .*/' \
497		*.[ch] ../common/*.[ch]
498
499clean: $(SIM_EXTRA_CLEAN)
500	rm -f *.[oa] *~ core
501	rm -f run$(EXEEXT) libsim.a
502	rm -f gentmap targ-map.c targ-vals.h stamp-tvals
503	if [ ! -f Make-common.in ] ; then \
504		rm -f $(BUILT_SRC_FROM_COMMON) ; \
505	fi
506	rm -f tmp-mloop.hin tmp-mloop.h tmp-mloop.cin tmp-mloop.c
507
508distclean mostlyclean maintainer-clean realclean: clean $(SIM_EXTRA_DISTCLEAN)
509	rm -f TAGS
510	rm -f Makefile config.cache config.log config.status .gdbinit
511	rm -f config.h stamp-h
512
513.c.o:
514	$(COMPILE) $<
515	$(POSTCOMPILE)
516
517# Dummy target to force execution of dependent targets.
518force:
519
520Makefile: Makefile.in $(srccom)/Make-common.in config.status
521	CONFIG_HEADERS= $(SHELL) ./config.status
522
523config.status: configure
524	$(SHELL) ./config.status --recheck
525
526config.h: stamp-h ; @true
527stamp-h: config.in config.status
528	CONFIG_FILES= CONFIG_HEADERS=config.h:config.in $(SHELL) ./config.status
529
530.gdbinit: # config.status $(srccom)/gdbinit.in
531	CONFIG_FILES=$@:../common/gdbinit.in CONFIG_HEADERS= $(SHELL) ./config.status
532
533
534# CGEN support
535
536CGENDIR = @cgendir@
537CGEN = "`if [ -f ../../guile/libguile/guile ]; then echo ../../guile/libguile/guile; else echo guile ; fi` -l $(CGENDIR)/guile.scm -s"
538CGENFLAGS = -v
539CGEN_CPU_DIR = $(CGENDIR)/cpu
540
541# Most ports use the files here instead of cgen/cpu.
542CPU_DIR = $(srcroot)/cpu
543
544CGEN_READ_SCM = $(CGENDIR)/sim.scm
545CGEN_ARCH_SCM = $(CGENDIR)/sim-arch.scm
546CGEN_CPU_SCM = $(CGENDIR)/sim-cpu.scm $(CGENDIR)/sim-model.scm
547CGEN_DECODE_SCM = $(CGENDIR)/sim-decode.scm
548CGEN_DESC_SCM = $(CGENDIR)/desc.scm $(CGENDIR)/desc-cpu.scm
549
550# Various choices for which cpu specific files to generate.
551# These are passed to cgen.sh in the "extrafiles" argument.
552CGEN_CPU_EXTR = /extr/
553CGEN_CPU_READ = /read/
554CGEN_CPU_WRITE = /write/
555CGEN_CPU_SEM = /sem/
556CGEN_CPU_SEMSW = /semsw/
557
558CGEN_FLAGS_TO_PASS = \
559	CGEN='$(CGEN)' \
560	CGENFLAGS="$(CGENFLAGS)"
561
562# We store the generated files in the source directory until we decide to
563# ship a Scheme interpreter with gdb/binutils.  Maybe we never will.
564
565cgen-arch: force
566	$(SHELL) $(srccom)/cgen.sh arch $(srcdir) \
567		$(CGEN) $(CGENDIR) "$(CGENFLAGS)" \
568		$(arch) "$(FLAGS)" ignored "$(isa)" $(mach) ignored \
569		$(archfile) ignored
570
571cgen-cpu: force
572	$(SHELL) $(srccom)/cgen.sh cpu $(srcdir) \
573		$(CGEN) $(CGENDIR) "$(CGENFLAGS)" \
574		$(arch) "$(FLAGS)" $(cpu) "$(isa)" $(mach) "$(SUFFIX)" \
575		$(archfile) "$(EXTRAFILES)"
576
577cgen-defs: force
578	$(SHELL) $(srccom)/cgen.sh defs $(srcdir) \
579		$(CGEN) $(CGENDIR) "$(CGENFLAGS)" \
580		$(arch) "$(FLAGS)" $(cpu) "$(isa)" $(mach) "$(SUFFIX)" \
581		$(archfile) ignored
582
583cgen-decode: force
584	$(SHELL) $(srccom)/cgen.sh decode $(srcdir) \
585		$(CGEN) $(CGENDIR) "$(CGENFLAGS)" \
586		$(arch) "$(FLAGS)" $(cpu) "$(isa)" $(mach) "$(SUFFIX)" \
587		$(archfile) "$(EXTRAFILES)"
588
589cgen-cpu-decode: force
590	$(SHELL) $(srccom)/cgen.sh cpu-decode $(srcdir) \
591		$(CGEN) $(CGENDIR) "$(CGENFLAGS)" \
592		$(arch) "$(FLAGS)" $(cpu) "$(isa)" $(mach) "$(SUFFIX)" \
593		$(archfile) "$(EXTRAFILES)"
594
595cgen-desc: force
596	$(SHELL) $(srccom)/cgen.sh desc $(srcdir) \
597		$(CGEN) $(CGENDIR) "$(CGENFLAGS)" \
598		$(arch) "$(FLAGS)" $(cpu) "$(isa)" $(mach) "$(SUFFIX)" \
599		$(archfile) ignored $(opcfile)
600
601## End COMMON_POST_CONFIG_FRAG
602