Makefile.am revision 1.1.1.6
1## Makefile for the GNU C++ Support library. 2## 3## Copyright (C) 2000-2018 Free Software Foundation, Inc. 4## 5## Process this file with automake to produce Makefile.in. 6## 7## This file is part of GCC. 8## 9## GCC is free software; you can redistribute it and/or modify 10## it under the terms of the GNU General Public License as published by 11## the Free Software Foundation; either version 3, or (at your option) 12## any later version. 13## 14## GCC is distributed in the hope that it will be useful, 15## but WITHOUT ANY WARRANTY; without even the implied warranty of 16## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17## GNU General Public License for more details. 18## 19## You should have received a copy of the GNU General Public License 20## along with GCC; see the file COPYING3. If not see 21## <http://www.gnu.org/licenses/>. 22 23include $(top_srcdir)/fragment.am 24 25# Need this library to both be part of libstdc++.a, and installed 26# separately too. 27# 1) separate libsupc++.la 28toolexeclib_LTLIBRARIES = libsupc++.la 29 30# 2) integrated libsupc++convenience.la that is to be a part of libstdc++.a 31noinst_LTLIBRARIES = libsupc++convenience.la 32 33std_HEADERS = \ 34 cxxabi.h exception initializer_list new typeinfo 35 36bits_HEADERS = \ 37 atomic_lockfree_defines.h cxxabi_forced.h \ 38 exception_defines.h exception_ptr.h hash_bytes.h nested_exception.h exception.h cxxabi_init_exception.h 39 40headers = $(std_HEADERS) $(bits_HEADERS) 41 42if GLIBCXX_HOSTED 43 c_sources = \ 44 cp-demangle.c 45endif 46 47sources = \ 48 array_type_info.cc \ 49 atexit_arm.cc \ 50 atexit_thread.cc \ 51 bad_alloc.cc \ 52 bad_array_length.cc \ 53 bad_array_new.cc \ 54 bad_cast.cc \ 55 bad_typeid.cc \ 56 class_type_info.cc \ 57 del_op.cc \ 58 del_ops.cc \ 59 del_opnt.cc \ 60 del_opv.cc \ 61 del_opvs.cc \ 62 del_opvnt.cc \ 63 dyncast.cc \ 64 eh_alloc.cc \ 65 eh_arm.cc \ 66 eh_aux_runtime.cc \ 67 eh_call.cc \ 68 eh_catch.cc \ 69 eh_exception.cc \ 70 eh_globals.cc \ 71 eh_personality.cc \ 72 eh_ptr.cc \ 73 eh_term_handler.cc \ 74 eh_terminate.cc \ 75 eh_tm.cc \ 76 eh_throw.cc \ 77 eh_type.cc \ 78 eh_unex_handler.cc \ 79 enum_type_info.cc \ 80 function_type_info.cc \ 81 fundamental_type_info.cc \ 82 guard.cc \ 83 guard_error.cc \ 84 hash_bytes.cc \ 85 nested_exception.cc \ 86 new_handler.cc \ 87 new_op.cc \ 88 new_opnt.cc \ 89 new_opv.cc \ 90 new_opvnt.cc \ 91 new_opa.cc \ 92 new_opant.cc \ 93 new_opva.cc \ 94 new_opvant.cc \ 95 del_opa.cc \ 96 del_opant.cc \ 97 del_opsa.cc \ 98 del_opva.cc \ 99 del_opvant.cc \ 100 del_opvsa.cc \ 101 pbase_type_info.cc \ 102 pmem_type_info.cc \ 103 pointer_type_info.cc \ 104 pure.cc \ 105 si_class_type_info.cc \ 106 tinfo.cc \ 107 tinfo2.cc \ 108 vec.cc \ 109 vmi_class_type_info.cc \ 110 vterminate.cc 111 112if ENABLE_VTABLE_VERIFY 113if !VTV_CYGMIN 114 vtv_sources = \ 115 vtv_stubs.cc 116endif 117endif 118 119libsupc___la_SOURCES = $(sources) $(c_sources) $(vtv_sources) 120libsupc__convenience_la_SOURCES = $(sources) $(c_sources) $(vtv_sources) 121 122cp-demangle.c: 123 rm -f $@ 124 $(LN_S) $(toplevel_srcdir)/libiberty/cp-demangle.c $@ 125cp-demangle.lo: cp-demangle.c 126 $(LTCOMPILE) -DIN_GLIBCPP_V3 -Wno-error -c $< 127cp-demangle.o: cp-demangle.c 128 $(C_COMPILE) -DIN_GLIBCPP_V3 -Wno-error -c $< 129 130 131# Use special rules for the C++17 sources so that the proper flags are passed. 132new_opa.lo: new_opa.cc 133 $(LTCXXCOMPILE) -std=gnu++1z -c $< 134new_opant.lo: new_opant.cc 135 $(LTCXXCOMPILE) -std=gnu++1z -c $< 136new_opva.lo: new_opva.cc 137 $(LTCXXCOMPILE) -std=gnu++1z -c $< 138new_opvant.lo: new_opvant.cc 139 $(LTCXXCOMPILE) -std=gnu++1z -c $< 140del_opa.lo: del_opa.cc 141 $(LTCXXCOMPILE) -std=gnu++1z -c $< 142del_opant.lo: del_opant.cc 143 $(LTCXXCOMPILE) -std=gnu++1z -c $< 144del_opsa.lo: del_opsa.cc 145 $(LTCXXCOMPILE) -std=gnu++1z -c $< 146del_opva.lo: del_opva.cc 147 $(LTCXXCOMPILE) -std=gnu++1z -c $< 148del_opvant.lo: del_opvant.cc 149 $(LTCXXCOMPILE) -std=gnu++1z -c $< 150del_opvsa.lo: del_opvsa.cc 151 $(LTCXXCOMPILE) -std=gnu++1z -c $< 152 153# AM_CXXFLAGS needs to be in each subdirectory so that it can be 154# modified in a per-library or per-sub-library way. Need to manually 155# set this option because CONFIG_CXXFLAGS has to be after 156# OPTIMIZE_CXXFLAGS on the compile line so that -O2 can be overridden 157# as the occasion call for it. 158AM_CXXFLAGS = \ 159 $(glibcxx_lt_pic_flag) $(glibcxx_compiler_shared_flag) \ 160 $(XTEMPLATE_FLAGS) \ 161 $(WARN_CXXFLAGS) $(OPTIMIZE_CXXFLAGS) $(CONFIG_CXXFLAGS) 162 163AM_MAKEFLAGS = \ 164 "gxx_include_dir=$(gxx_include_dir)" 165 166 167# Use special rules for pulling things out of libiberty. These 168# objects should be compiled with the "C" compiler, not the C++ 169# compiler, and also should not use the C++ includes. 170C_INCLUDES = -I.. -I$(toplevel_srcdir)/libiberty -I$(toplevel_srcdir)/include 171C_COMPILE = \ 172 $(CC) $(DEFS) $(C_INCLUDES) \ 173 $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) $(EXTRA_CFLAGS) 174 175# LTCOMPILE is copied from LTCXXCOMPILE below. 176LTCOMPILE = $(LIBTOOL) --tag CC --tag disable-shared $(LIBTOOLFLAGS) --mode=compile \ 177 $(CC) $(DEFS) $(C_INCLUDES) \ 178 $(glibcxx_lt_pic_flag) $(glibcxx_compiler_shared_flag) \ 179 $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) $(EXTRA_CFLAGS) 180 181# Libtool notes 182 183# 1) In general, libtool expects an argument such as `--tag=CXX' when 184# using the C++ compiler, because that will enable the settings 185# detected when C++ support was being configured. However, when no 186# such flag is given in the command line, libtool attempts to figure 187# it out by matching the compiler name in each configuration section 188# against a prefix of the command line. The problem is that, if the 189# compiler name and its initial flags stored in the libtool 190# configuration file don't match those in the command line, libtool 191# can't decide which configuration to use, and it gives up. The 192# correct solution is to add `--tag CXX' to LTCXXCOMPILE and maybe 193# CXXLINK, just after $(LIBTOOL), so that libtool doesn't have to 194# attempt to infer which configuration to use. 195# 196# The second tag argument, `--tag disable-shared` means that libtool 197# only compiles each source once, for static objects. In actuality, 198# glibcxx_lt_pic_flag and glibcxx_compiler_shared_flag are added to 199# the libtool command that is used create the object, which is 200# suitable for shared libraries. The `--tag disable-shared` must be 201# placed after --tag CXX lest things CXX undo the affect of 202# disable-shared. 203 204# 2) Need to explicitly set LTCXXCOMPILE so that EXTRA_CXX_FLAGS is 205# last. (That way, things like -O2 passed down from the toplevel can 206# be overridden by --enable-debug.) 207LTCXXCOMPILE = \ 208 $(LIBTOOL) --tag CXX --tag disable-shared \ 209 $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ 210 --mode=compile $(CXX) $(TOPLEVEL_INCLUDES) \ 211 $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) $(EXTRA_CXX_FLAGS) 212 213LTLDFLAGS = $(shell $(SHELL) $(top_srcdir)/../libtool-ldflags $(LDFLAGS)) 214 215# 3) We'd have a problem when building the shared libstdc++ object if 216# the rules automake generates would be used. We cannot allow g++ to 217# be used since this would add -lstdc++ to the link line which of 218# course is problematic at this point. So, we get the top-level 219# directory to configure libstdc++-v3 to use gcc as the C++ 220# compilation driver. 221CXXLINK = \ 222 $(LIBTOOL) --tag CXX --tag disable-shared \ 223 $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ 224 --mode=link $(CXX) \ 225 $(OPT_LDFLAGS) $(SECTION_LDFLAGS) $(AM_CXXFLAGS) $(LTLDFLAGS) -o $@ 226 227# Install notes 228# We have to have rules modified from the default to counteract SUN make 229# prepending each of $(*_HEADERS) with VPATH below. 230stddir = $(gxx_include_dir) 231bitsdir = $(gxx_include_dir)/bits 232 233install-stdHEADERS: $(std_HEADERS) 234 @$(NORMAL_INSTALL) 235 $(mkinstalldirs) $(DESTDIR)$(stddir) 236 @list='$(std_HEADERS)'; for p in $$list; do \ 237 q=`echo $$p | sed -e 's,.*/,,'`; \ 238 if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \ 239 echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(stddir)/$$q"; \ 240 $(INSTALL_DATA) $$d$$p $(DESTDIR)$(stddir)/$$q; \ 241 done 242 243install-bitsHEADERS: $(bits_HEADERS) 244 @$(NORMAL_INSTALL) 245 $(mkinstalldirs) $(DESTDIR)$(bitsdir) 246 @list='$(bits_HEADERS)'; for p in $$list; do \ 247 q=`echo $$p | sed -e 's,.*/,,'`; \ 248 if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \ 249 echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(bitsdir)/$$q"; \ 250 $(INSTALL_DATA) $$d$$p $(DESTDIR)$(bitsdir)/$$q; \ 251 done 252 253uninstall-stdHEADERS: 254 @$(NORMAL_UNINSTALL) 255 list='$(std_HEADERS)'; for p in $$list; do \ 256 q=`echo $$p | sed -e 's,.*/,,'`; \ 257 rm -f $(DESTDIR)$(stddir)/$$q; \ 258 done 259 260uninstall-bitsHEADERS: 261 @$(NORMAL_UNINSTALL) 262 list='$(bits_HEADERS)'; for p in $$list; do \ 263 q=`echo $$p | sed -e 's,.*/,,'`; \ 264 rm -f $(DESTDIR)$(bitsdir)/$$q; \ 265 done 266 267 268# By adding these files here, automake will remove them for 'make clean' 269CLEANFILES = stamp-* 270 271