Makefile.am revision 1.1.1.1.2.1
1## Makefile for the GNU C++ Support library. 2## 3## Copyright (C) 2000-2013 Free Software Foundation, Inc. 4## 5## Process this file with automake to produce Makefile.in. 6## 7## This file is part of GCC. 8## 9## GCC is free software; you can redistribute it and/or modify 10## it under the terms of the GNU General Public License as published by 11## the Free Software Foundation; either version 3, or (at your option) 12## any later version. 13## 14## GCC is distributed in the hope that it will be useful, 15## but WITHOUT ANY WARRANTY; without even the implied warranty of 16## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17## GNU General Public License for more details. 18## 19## You should have received a copy of the GNU General Public License 20## along with GCC; see the file COPYING3. If not see 21## <http://www.gnu.org/licenses/>. 22 23include $(top_srcdir)/fragment.am 24 25# Need this library to both be part of libstdc++.a, and installed 26# separately too. 27# 1) separate libsupc++.la 28toolexeclib_LTLIBRARIES = libsupc++.la 29# 2) integrated libsupc++convenience.la that is to be a part of libstdc++.a 30noinst_LTLIBRARIES = libsupc++convenience.la 31 32std_HEADERS = \ 33 cxxabi.h exception initializer_list new typeinfo 34 35bits_HEADERS = \ 36 atomic_lockfree_defines.h cxxabi_forced.h \ 37 exception_defines.h exception_ptr.h hash_bytes.h nested_exception.h 38 39headers = $(std_HEADERS) $(bits_HEADERS) 40 41if GLIBCXX_HOSTED 42 c_sources = \ 43 cp-demangle.c 44endif 45 46sources = \ 47 array_type_info.cc \ 48 atexit_arm.cc \ 49 atexit_thread.cc \ 50 bad_alloc.cc \ 51 bad_cast.cc \ 52 bad_typeid.cc \ 53 class_type_info.cc \ 54 del_op.cc \ 55 del_opnt.cc \ 56 del_opv.cc \ 57 del_opvnt.cc \ 58 dyncast.cc \ 59 eh_alloc.cc \ 60 eh_arm.cc \ 61 eh_aux_runtime.cc \ 62 eh_call.cc \ 63 eh_catch.cc \ 64 eh_exception.cc \ 65 eh_globals.cc \ 66 eh_personality.cc \ 67 eh_ptr.cc \ 68 eh_term_handler.cc \ 69 eh_terminate.cc \ 70 eh_tm.cc \ 71 eh_throw.cc \ 72 eh_type.cc \ 73 eh_unex_handler.cc \ 74 enum_type_info.cc \ 75 function_type_info.cc \ 76 fundamental_type_info.cc \ 77 guard.cc \ 78 guard_error.cc \ 79 hash_bytes.cc \ 80 nested_exception.cc \ 81 new_handler.cc \ 82 new_op.cc \ 83 new_opnt.cc \ 84 new_opv.cc \ 85 new_opvnt.cc \ 86 pbase_type_info.cc \ 87 pmem_type_info.cc \ 88 pointer_type_info.cc \ 89 pure.cc \ 90 si_class_type_info.cc \ 91 tinfo.cc \ 92 tinfo2.cc \ 93 vec.cc \ 94 vmi_class_type_info.cc \ 95 vterminate.cc 96 97libsupc___la_SOURCES = $(sources) $(c_sources) 98libsupc__convenience_la_SOURCES = $(sources) $(c_sources) 99 100cp-demangle.c: 101 rm -f $@ 102 $(LN_S) $(toplevel_srcdir)/libiberty/cp-demangle.c $@ 103cp-demangle.lo: cp-demangle.c 104 $(LTCOMPILE) -DIN_GLIBCPP_V3 -Wno-error -c $< 105cp-demangle.o: cp-demangle.c 106 $(C_COMPILE) -DIN_GLIBCPP_V3 -Wno-error -c $< 107 108 109# Use special rules for the C++0x sources so that the proper flags are passed. 110eh_ptr.lo: eh_ptr.cc 111 $(LTCXXCOMPILE) -std=gnu++0x -c $< 112eh_ptr.o: eh_ptr.cc 113 $(CXXCOMPILE) -std=gnu++0x -c $< 114 115eh_throw.lo: eh_throw.cc 116 $(LTCXXCOMPILE) -std=gnu++0x -c $< 117eh_throw.o: eh_throw.cc 118 $(CXXCOMPILE) -std=gnu++0x -c $< 119 120guard.lo: guard.cc 121 $(LTCXXCOMPILE) -std=gnu++0x -c $< 122guard.o: guard.cc 123 $(CXXCOMPILE) -std=gnu++0x -c $< 124 125atexit_thread.lo: atexit_thread.cc 126 $(LTCXXCOMPILE) -std=gnu++0x -c $< 127atexit_thread.o: atexit_thread.cc 128 $(CXXCOMPILE) -std=gnu++0x -c $< 129 130nested_exception.lo: nested_exception.cc 131 $(LTCXXCOMPILE) -std=gnu++0x -c $< 132nested_exception.o: nested_exception.cc 133 $(CXXCOMPILE) -std=gnu++0x -c $< 134 135# AM_CXXFLAGS needs to be in each subdirectory so that it can be 136# modified in a per-library or per-sub-library way. Need to manually 137# set this option because CONFIG_CXXFLAGS has to be after 138# OPTIMIZE_CXXFLAGS on the compile line so that -O2 can be overridden 139# as the occasion call for it. 140AM_CXXFLAGS = \ 141 $(glibcxx_lt_pic_flag) $(glibcxx_compiler_shared_flag) \ 142 $(XTEMPLATE_FLAGS) \ 143 $(WARN_CXXFLAGS) $(OPTIMIZE_CXXFLAGS) $(CONFIG_CXXFLAGS) 144 145AM_MAKEFLAGS = \ 146 "gxx_include_dir=$(gxx_include_dir)" 147 148 149# Use special rules for pulling things out of libiberty. These 150# objects should be compiled with the "C" compiler, not the C++ 151# compiler, and also should not use the C++ includes. 152C_INCLUDES = -I.. -I$(toplevel_srcdir)/libiberty -I$(toplevel_srcdir)/include 153C_COMPILE = \ 154 $(CC) $(DEFS) $(C_INCLUDES) \ 155 $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) 156 157# LTCOMPILE is copied from LTCXXCOMPILE below. 158LTCOMPILE = $(LIBTOOL) --tag CC --tag disable-shared $(LIBTOOLFLAGS) --mode=compile \ 159 $(CC) $(DEFS) $(C_INCLUDES) \ 160 $(glibcxx_lt_pic_flag) $(glibcxx_compiler_shared_flag) \ 161 $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) 162 163# Libtool notes 164 165# 1) In general, libtool expects an argument such as `--tag=CXX' when 166# using the C++ compiler, because that will enable the settings 167# detected when C++ support was being configured. However, when no 168# such flag is given in the command line, libtool attempts to figure 169# it out by matching the compiler name in each configuration section 170# against a prefix of the command line. The problem is that, if the 171# compiler name and its initial flags stored in the libtool 172# configuration file don't match those in the command line, libtool 173# can't decide which configuration to use, and it gives up. The 174# correct solution is to add `--tag CXX' to LTCXXCOMPILE and maybe 175# CXXLINK, just after $(LIBTOOL), so that libtool doesn't have to 176# attempt to infer which configuration to use. 177# 178# The second tag argument, `--tag disable-shared` means that libtool 179# only compiles each source once, for static objects. In actuality, 180# glibcxx_lt_pic_flag and glibcxx_compiler_shared_flag are added to 181# the libtool command that is used create the object, which is 182# suitable for shared libraries. The `--tag disable-shared` must be 183# placed after --tag CXX lest things CXX undo the affect of 184# disable-shared. 185 186# 2) Need to explicitly set LTCXXCOMPILE so that EXTRA_CXX_FLAGS is 187# last. (That way, things like -O2 passed down from the toplevel can 188# be overridden by --enable-debug.) 189LTCXXCOMPILE = \ 190 $(LIBTOOL) --tag CXX --tag disable-shared \ 191 $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ 192 --mode=compile $(CXX) $(TOPLEVEL_INCLUDES) \ 193 $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) $(EXTRA_CXX_FLAGS) 194 195LTLDFLAGS = $(shell $(SHELL) $(top_srcdir)/../libtool-ldflags $(LDFLAGS)) 196 197# 3) We'd have a problem when building the shared libstdc++ object if 198# the rules automake generates would be used. We cannot allow g++ to 199# be used since this would add -lstdc++ to the link line which of 200# course is problematic at this point. So, we get the top-level 201# directory to configure libstdc++-v3 to use gcc as the C++ 202# compilation driver. 203CXXLINK = \ 204 $(LIBTOOL) --tag CXX --tag disable-shared \ 205 $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ 206 --mode=link $(CXX) \ 207 $(OPT_LDFLAGS) $(SECTION_LDFLAGS) $(AM_CXXFLAGS) $(LTLDFLAGS) -o $@ 208 209# Install notes 210# We have to have rules modified from the default to counteract SUN make 211# prepending each of $(*_HEADERS) with VPATH below. 212stddir = $(gxx_include_dir) 213bitsdir = $(gxx_include_dir)/bits 214 215install-stdHEADERS: $(std_HEADERS) 216 @$(NORMAL_INSTALL) 217 $(mkinstalldirs) $(DESTDIR)$(stddir) 218 @list='$(std_HEADERS)'; for p in $$list; do \ 219 q=`echo $$p | sed -e 's,.*/,,'`; \ 220 if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \ 221 echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(stddir)/$$q"; \ 222 $(INSTALL_DATA) $$d$$p $(DESTDIR)$(stddir)/$$q; \ 223 done 224 225install-bitsHEADERS: $(bits_HEADERS) 226 @$(NORMAL_INSTALL) 227 $(mkinstalldirs) $(DESTDIR)$(bitsdir) 228 @list='$(bits_HEADERS)'; for p in $$list; do \ 229 q=`echo $$p | sed -e 's,.*/,,'`; \ 230 if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \ 231 echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(bitsdir)/$$q"; \ 232 $(INSTALL_DATA) $$d$$p $(DESTDIR)$(bitsdir)/$$q; \ 233 done 234 235uninstall-stdHEADERS: 236 @$(NORMAL_UNINSTALL) 237 list='$(std_HEADERS)'; for p in $$list; do \ 238 q=`echo $$p | sed -e 's,.*/,,'`; \ 239 rm -f $(DESTDIR)$(stddir)/$$q; \ 240 done 241 242uninstall-bitsHEADERS: 243 @$(NORMAL_UNINSTALL) 244 list='$(bits_HEADERS)'; for p in $$list; do \ 245 q=`echo $$p | sed -e 's,.*/,,'`; \ 246 rm -f $(DESTDIR)$(bitsdir)/$$q; \ 247 done 248