Makefile.in revision 1.1.1.1 
1# Makefile.in generated by automake 1.11.1 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
6# Inc.
7# This Makefile.in is free software; the Free Software Foundation
8# gives unlimited permission to copy and/or distribute it,
9# with or without modifications, as long as this notice is preserved.
10
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14# PARTICULAR PURPOSE.
15
16@SET_MAKE@
17VPATH = @srcdir@
18pkgdatadir = $(datadir)/@PACKAGE@
19pkgincludedir = $(includedir)/@PACKAGE@
20pkglibdir = $(libdir)/@PACKAGE@
21pkglibexecdir = $(libexecdir)/@PACKAGE@
22am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
23install_sh_DATA = $(install_sh) -c -m 644
24install_sh_PROGRAM = $(install_sh) -c
25install_sh_SCRIPT = $(install_sh) -c
26INSTALL_HEADER = $(INSTALL_DATA)
27transform = $(program_transform_name)
28NORMAL_INSTALL = :
29PRE_INSTALL = :
30POST_INSTALL = :
31NORMAL_UNINSTALL = :
32PRE_UNINSTALL = :
33POST_UNINSTALL = :
34build_triplet = @build@
35host_triplet = @host@
36target_triplet = @target@
37subdir = .
38DIST_COMMON = ChangeLog $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
39	$(top_srcdir)/configure $(am__configure_deps) \
40	$(srcdir)/../mkinstalldirs
41ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
42am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
43	$(top_srcdir)/../config/depstand.m4 \
44	$(top_srcdir)/../config/lead-dot.m4 \
45	$(top_srcdir)/../config/libstdc++-raw-cxx.m4 \
46	$(top_srcdir)/../config/multi.m4 \
47	$(top_srcdir)/../config/override.m4 \
48	$(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
49	$(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
50	$(top_srcdir)/acinclude.m4 $(top_srcdir)/../libtool.m4 \
51	$(top_srcdir)/configure.ac
52am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
53	$(ACLOCAL_M4)
54am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
55 configure.lineno config.status.lineno
56mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
57CONFIG_CLEAN_FILES =
58CONFIG_CLEAN_VPATH_FILES =
59SOURCES =
60MULTISRCTOP = 
61MULTIBUILDTOP = 
62MULTIDIRS = 
63MULTISUBDIR = 
64MULTIDO = true
65MULTICLEAN = true
66RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
67	html-recursive info-recursive install-data-recursive \
68	install-dvi-recursive install-exec-recursive \
69	install-html-recursive install-info-recursive \
70	install-pdf-recursive install-ps-recursive install-recursive \
71	installcheck-recursive installdirs-recursive pdf-recursive \
72	ps-recursive uninstall-recursive
73RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
74  distclean-recursive maintainer-clean-recursive
75AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
76	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS
77ETAGS = etags
78CTAGS = ctags
79DIST_SUBDIRS = interception sanitizer_common asan tsan
80ACLOCAL = @ACLOCAL@
81AMTAR = @AMTAR@
82AR = @AR@
83AUTOCONF = @AUTOCONF@
84AUTOHEADER = @AUTOHEADER@
85AUTOMAKE = @AUTOMAKE@
86AWK = @AWK@
87CC = @CC@
88CCAS = @CCAS@
89CCASDEPMODE = @CCASDEPMODE@
90CCASFLAGS = @CCASFLAGS@
91CCDEPMODE = @CCDEPMODE@
92CFLAGS = @CFLAGS@
93CPP = @CPP@
94CPPFLAGS = @CPPFLAGS@
95CXX = @CXX@
96CXXCPP = @CXXCPP@
97CXXDEPMODE = @CXXDEPMODE@
98CXXFLAGS = @CXXFLAGS@
99CYGPATH_W = @CYGPATH_W@
100DEFS = @DEFS@
101DEPDIR = @DEPDIR@
102DSYMUTIL = @DSYMUTIL@
103DUMPBIN = @DUMPBIN@
104ECHO_C = @ECHO_C@
105ECHO_N = @ECHO_N@
106ECHO_T = @ECHO_T@
107EGREP = @EGREP@
108EXEEXT = @EXEEXT@
109FGREP = @FGREP@
110GREP = @GREP@
111INSTALL = @INSTALL@
112INSTALL_DATA = @INSTALL_DATA@
113INSTALL_PROGRAM = @INSTALL_PROGRAM@
114INSTALL_SCRIPT = @INSTALL_SCRIPT@
115INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
116LD = @LD@
117LDFLAGS = @LDFLAGS@
118LIBOBJS = @LIBOBJS@
119LIBS = @LIBS@
120LIBSTDCXX_RAW_CXX_CXXFLAGS = @LIBSTDCXX_RAW_CXX_CXXFLAGS@
121LIBSTDCXX_RAW_CXX_LDFLAGS = @LIBSTDCXX_RAW_CXX_LDFLAGS@
122LIBTOOL = @LIBTOOL@
123LIPO = @LIPO@
124LN_S = @LN_S@
125LTLIBOBJS = @LTLIBOBJS@
126MAINT = @MAINT@
127MAKEINFO = @MAKEINFO@
128MKDIR_P = @MKDIR_P@
129NM = @NM@
130NMEDIT = @NMEDIT@
131OBJDUMP = @OBJDUMP@
132OBJEXT = @OBJEXT@
133OTOOL = @OTOOL@
134OTOOL64 = @OTOOL64@
135PACKAGE = @PACKAGE@
136PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
137PACKAGE_NAME = @PACKAGE_NAME@
138PACKAGE_STRING = @PACKAGE_STRING@
139PACKAGE_TARNAME = @PACKAGE_TARNAME@
140PACKAGE_URL = @PACKAGE_URL@
141PACKAGE_VERSION = @PACKAGE_VERSION@
142PATH_SEPARATOR = @PATH_SEPARATOR@
143RANLIB = @RANLIB@
144SED = @SED@
145SET_MAKE = @SET_MAKE@
146SHELL = @SHELL@
147STRIP = @STRIP@
148VERSION = @VERSION@
149abs_builddir = @abs_builddir@
150abs_srcdir = @abs_srcdir@
151abs_top_builddir = @abs_top_builddir@
152abs_top_srcdir = @abs_top_srcdir@
153ac_ct_CC = @ac_ct_CC@
154ac_ct_CXX = @ac_ct_CXX@
155ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
156am__include = @am__include@
157am__leading_dot = @am__leading_dot@
158am__quote = @am__quote@
159am__tar = @am__tar@
160am__untar = @am__untar@
161bindir = @bindir@
162build = @build@
163build_alias = @build_alias@
164build_cpu = @build_cpu@
165build_os = @build_os@
166build_vendor = @build_vendor@
167builddir = @builddir@
168datadir = @datadir@
169datarootdir = @datarootdir@
170docdir = @docdir@
171dvidir = @dvidir@
172enable_shared = @enable_shared@
173enable_static = @enable_static@
174exec_prefix = @exec_prefix@
175host = @host@
176host_alias = @host_alias@
177host_cpu = @host_cpu@
178host_os = @host_os@
179host_vendor = @host_vendor@
180htmldir = @htmldir@
181includedir = @includedir@
182infodir = @infodir@
183install_sh = @install_sh@
184libdir = @libdir@
185libexecdir = @libexecdir@
186localedir = @localedir@
187localstatedir = @localstatedir@
188mandir = @mandir@
189mkdir_p = @mkdir_p@
190multi_basedir = @multi_basedir@
191oldincludedir = @oldincludedir@
192pdfdir = @pdfdir@
193prefix = @prefix@
194program_transform_name = @program_transform_name@
195psdir = @psdir@
196sbindir = @sbindir@
197sharedstatedir = @sharedstatedir@
198srcdir = @srcdir@
199sysconfdir = @sysconfdir@
200target = @target@
201target_alias = @target_alias@
202target_cpu = @target_cpu@
203target_noncanonical = @target_noncanonical@
204target_os = @target_os@
205target_vendor = @target_vendor@
206toolexecdir = @toolexecdir@
207toolexeclibdir = @toolexeclibdir@
208top_build_prefix = @top_build_prefix@
209top_builddir = @top_builddir@
210top_srcdir = @top_srcdir@
211ACLOCAL_AMFLAGS = -I .. -I ../config
212@TSAN_SUPPORTED_FALSE@SUBDIRS = interception sanitizer_common asan 
213@TSAN_SUPPORTED_TRUE@SUBDIRS = interception sanitizer_common asan tsan 
214@USING_MAC_INTERPOSE_TRUE@SUBDIRS = sanitizer_common asan
215
216# Work around what appears to be a GNU make bug handling MAKEFLAGS
217# values defined in terms of make variables, as is the case for CC and
218# friends when we are called from the top level Makefile.
219AM_MAKEFLAGS = \
220	"AR_FLAGS=$(AR_FLAGS)" \
221	"CC_FOR_BUILD=$(CC_FOR_BUILD)" \
222	"CFLAGS=$(CFLAGS)" \
223	"CXXFLAGS=$(CXXFLAGS)" \
224	"CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
225	"CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
226	"INSTALL=$(INSTALL)" \
227	"INSTALL_DATA=$(INSTALL_DATA)" \
228	"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
229	"INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
230	"JC1FLAGS=$(JC1FLAGS)" \
231	"LDFLAGS=$(LDFLAGS)" \
232	"LIBCFLAGS=$(LIBCFLAGS)" \
233	"LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
234	"MAKE=$(MAKE)" \
235	"MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
236	"PICFLAG=$(PICFLAG)" \
237	"PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
238	"SHELL=$(SHELL)" \
239	"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
240	"exec_prefix=$(exec_prefix)" \
241	"infodir=$(infodir)" \
242	"libdir=$(libdir)" \
243	"prefix=$(prefix)" \
244	"includedir=$(includedir)" \
245	"AR=$(AR)" \
246	"AS=$(AS)" \
247	"LD=$(LD)" \
248	"LIBCFLAGS=$(LIBCFLAGS)" \
249	"NM=$(NM)" \
250	"PICFLAG=$(PICFLAG)" \
251	"RANLIB=$(RANLIB)" \
252	"DESTDIR=$(DESTDIR)"
253
254MAKEOVERRIDES = 
255all: all-recursive
256
257.SUFFIXES:
258am--refresh:
259	@:
260$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
261	@for dep in $?; do \
262	  case '$(am__configure_deps)' in \
263	    *$$dep*) \
264	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
265	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
266		&& exit 0; \
267	      exit 1;; \
268	  esac; \
269	done; \
270	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
271	$(am__cd) $(top_srcdir) && \
272	  $(AUTOMAKE) --foreign Makefile
273.PRECIOUS: Makefile
274Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
275	@case '$?' in \
276	  *config.status*) \
277	    echo ' $(SHELL) ./config.status'; \
278	    $(SHELL) ./config.status;; \
279	  *) \
280	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
281	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
282	esac;
283
284$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
285	$(SHELL) ./config.status --recheck
286
287$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
288	$(am__cd) $(srcdir) && $(AUTOCONF)
289$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
290	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
291$(am__aclocal_m4_deps):
292
293mostlyclean-libtool:
294	-rm -f *.lo
295
296clean-libtool:
297	-rm -rf .libs _libs
298
299distclean-libtool:
300	-rm -f libtool config.lt
301
302# GNU Make needs to see an explicit $(MAKE) variable in the command it
303# runs to enable its job server during parallel builds.  Hence the
304# comments below.
305all-multi:
306	$(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE)
307install-multi:
308	$(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE)
309
310mostlyclean-multi:
311	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE)
312clean-multi:
313	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE)
314distclean-multi:
315	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE)
316maintainer-clean-multi:
317	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE)
318
319# This directory's subdirectories are mostly independent; you can cd
320# into them and run `make' without going through this Makefile.
321# To change the values of `make' variables: instead of editing Makefiles,
322# (1) if the variable is set in `config.status', edit `config.status'
323#     (which will cause the Makefiles to be regenerated when you run `make');
324# (2) otherwise, pass the desired values on the `make' command line.
325$(RECURSIVE_TARGETS):
326	@fail= failcom='exit 1'; \
327	for f in x $$MAKEFLAGS; do \
328	  case $$f in \
329	    *=* | --[!k]*);; \
330	    *k*) failcom='fail=yes';; \
331	  esac; \
332	done; \
333	dot_seen=no; \
334	target=`echo $@ | sed s/-recursive//`; \
335	list='$(SUBDIRS)'; for subdir in $$list; do \
336	  echo "Making $$target in $$subdir"; \
337	  if test "$$subdir" = "."; then \
338	    dot_seen=yes; \
339	    local_target="$$target-am"; \
340	  else \
341	    local_target="$$target"; \
342	  fi; \
343	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
344	  || eval $$failcom; \
345	done; \
346	if test "$$dot_seen" = "no"; then \
347	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
348	fi; test -z "$$fail"
349
350$(RECURSIVE_CLEAN_TARGETS):
351	@fail= failcom='exit 1'; \
352	for f in x $$MAKEFLAGS; do \
353	  case $$f in \
354	    *=* | --[!k]*);; \
355	    *k*) failcom='fail=yes';; \
356	  esac; \
357	done; \
358	dot_seen=no; \
359	case "$@" in \
360	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
361	  *) list='$(SUBDIRS)' ;; \
362	esac; \
363	rev=''; for subdir in $$list; do \
364	  if test "$$subdir" = "."; then :; else \
365	    rev="$$subdir $$rev"; \
366	  fi; \
367	done; \
368	rev="$$rev ."; \
369	target=`echo $@ | sed s/-recursive//`; \
370	for subdir in $$rev; do \
371	  echo "Making $$target in $$subdir"; \
372	  if test "$$subdir" = "."; then \
373	    local_target="$$target-am"; \
374	  else \
375	    local_target="$$target"; \
376	  fi; \
377	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
378	  || eval $$failcom; \
379	done && test -z "$$fail"
380tags-recursive:
381	list='$(SUBDIRS)'; for subdir in $$list; do \
382	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
383	done
384ctags-recursive:
385	list='$(SUBDIRS)'; for subdir in $$list; do \
386	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
387	done
388
389ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
390	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
391	unique=`for i in $$list; do \
392	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
393	  done | \
394	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
395	      END { if (nonempty) { for (i in files) print i; }; }'`; \
396	mkid -fID $$unique
397tags: TAGS
398
399TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
400		$(TAGS_FILES) $(LISP)
401	set x; \
402	here=`pwd`; \
403	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
404	  include_option=--etags-include; \
405	  empty_fix=.; \
406	else \
407	  include_option=--include; \
408	  empty_fix=; \
409	fi; \
410	list='$(SUBDIRS)'; for subdir in $$list; do \
411	  if test "$$subdir" = .; then :; else \
412	    test ! -f $$subdir/TAGS || \
413	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
414	  fi; \
415	done; \
416	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
417	unique=`for i in $$list; do \
418	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
419	  done | \
420	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
421	      END { if (nonempty) { for (i in files) print i; }; }'`; \
422	shift; \
423	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
424	  test -n "$$unique" || unique=$$empty_fix; \
425	  if test $$# -gt 0; then \
426	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
427	      "$$@" $$unique; \
428	  else \
429	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
430	      $$unique; \
431	  fi; \
432	fi
433ctags: CTAGS
434CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
435		$(TAGS_FILES) $(LISP)
436	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
437	unique=`for i in $$list; do \
438	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
439	  done | \
440	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
441	      END { if (nonempty) { for (i in files) print i; }; }'`; \
442	test -z "$(CTAGS_ARGS)$$unique" \
443	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
444	     $$unique
445
446GTAGS:
447	here=`$(am__cd) $(top_builddir) && pwd` \
448	  && $(am__cd) $(top_srcdir) \
449	  && gtags -i $(GTAGS_ARGS) "$$here"
450
451distclean-tags:
452	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
453check-am: all-am
454check: check-recursive
455all-am: Makefile all-multi
456installdirs: installdirs-recursive
457installdirs-am:
458install: install-recursive
459install-exec: install-exec-recursive
460install-data: install-data-recursive
461uninstall: uninstall-recursive
462
463install-am: all-am
464	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
465
466installcheck: installcheck-recursive
467install-strip:
468	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
469	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
470	  `test -z '$(STRIP)' || \
471	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
472mostlyclean-generic:
473
474clean-generic:
475
476distclean-generic:
477	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
478	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
479
480maintainer-clean-generic:
481	@echo "This command is intended for maintainers to use"
482	@echo "it deletes files that may require special tools to rebuild."
483clean: clean-multi clean-recursive
484
485clean-am: clean-generic clean-libtool mostlyclean-am
486
487distclean: distclean-multi distclean-recursive
488	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
489	-rm -f Makefile
490distclean-am: clean-am distclean-generic distclean-libtool \
491	distclean-tags
492
493dvi: dvi-recursive
494
495dvi-am:
496
497html: html-recursive
498
499html-am:
500
501info: info-recursive
502
503info-am:
504
505install-data-am:
506
507install-dvi: install-dvi-recursive
508
509install-dvi-am:
510
511install-exec-am: install-multi
512
513install-html: install-html-recursive
514
515install-html-am:
516
517install-info: install-info-recursive
518
519install-info-am:
520
521install-man:
522
523install-pdf: install-pdf-recursive
524
525install-pdf-am:
526
527install-ps: install-ps-recursive
528
529install-ps-am:
530
531installcheck-am:
532
533maintainer-clean: maintainer-clean-multi maintainer-clean-recursive
534	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
535	-rm -rf $(top_srcdir)/autom4te.cache
536	-rm -f Makefile
537maintainer-clean-am: distclean-am maintainer-clean-generic
538
539mostlyclean: mostlyclean-multi mostlyclean-recursive
540
541mostlyclean-am: mostlyclean-generic mostlyclean-libtool
542
543pdf: pdf-recursive
544
545pdf-am:
546
547ps: ps-recursive
548
549ps-am:
550
551uninstall-am:
552
553.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all-multi \
554	clean-multi ctags-recursive distclean-multi install-am \
555	install-multi install-strip maintainer-clean-multi \
556	mostlyclean-multi tags-recursive
557
558.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
559	all all-am all-multi am--refresh check check-am clean \
560	clean-generic clean-libtool clean-multi ctags ctags-recursive \
561	distclean distclean-generic distclean-libtool distclean-multi \
562	distclean-tags dvi dvi-am html html-am info info-am install \
563	install-am install-data install-data-am install-dvi \
564	install-dvi-am install-exec install-exec-am install-html \
565	install-html-am install-info install-info-am install-man \
566	install-multi install-pdf install-pdf-am install-ps \
567	install-ps-am install-strip installcheck installcheck-am \
568	installdirs installdirs-am maintainer-clean \
569	maintainer-clean-generic maintainer-clean-multi mostlyclean \
570	mostlyclean-generic mostlyclean-libtool mostlyclean-multi pdf \
571	pdf-am ps ps-am tags tags-recursive uninstall uninstall-am
572
573
574# Tell versions [3.59,3.63) of GNU make to not export all variables.
575# Otherwise a system limit (for SysV at least) may be exceeded.
576.NOEXPORT:
577