1/* GCC backend definitions for the Renesas RL78 processor. 2 Copyright (C) 2011-2020 Free Software Foundation, Inc. 3 Contributed by Red Hat. 4 5 This file is part of GCC. 6 7 GCC is free software; you can redistribute it and/or modify it 8 under the terms of the GNU General Public License as published 9 by the Free Software Foundation; either version 3, or (at your 10 option) any later version. 11 12 GCC is distributed in the hope that it will be useful, but WITHOUT 13 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 14 or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public 15 License for more details. 16 17 You should have received a copy of the GNU General Public License 18 along with GCC; see the file COPYING3. If not see 19 <http://www.gnu.org/licenses/>. */ 20 21 22#define RL78_MUL_NONE (rl78_mul_type == MUL_NONE) 23#define RL78_MUL_G13 (rl78_mul_type == MUL_G13) 24#define RL78_MUL_G14 (rl78_mul_type == MUL_G14) 25 26#define TARGET_G10 (rl78_cpu_type == CPU_G10) 27#define TARGET_G13 (rl78_cpu_type == CPU_G13) 28#define TARGET_G14 (rl78_cpu_type == CPU_G14) 29 30#define TARGET_CPU_CPP_BUILTINS() \ 31 do \ 32 { \ 33 builtin_define ("__RL78__"); \ 34 builtin_assert ("cpu=RL78"); \ 35 \ 36 if (RL78_MUL_NONE) \ 37 builtin_define ("__RL78_MUL_NONE__"); \ 38 else if (RL78_MUL_G13) \ 39 builtin_define ("__RL78_MUL_G13__"); \ 40 else if (RL78_MUL_G14) \ 41 builtin_define ("__RL78_MUL_G14__"); \ 42 \ 43 if (TARGET_G10) \ 44 builtin_define ("__RL78_G10__"); \ 45 else if (TARGET_G13) \ 46 builtin_define ("__RL78_G13__"); \ 47 else if (TARGET_G14) \ 48 builtin_define ("__RL78_G14__"); \ 49 } \ 50 while (0) 51 52#undef STARTFILE_SPEC 53#define STARTFILE_SPEC "%{pg:gcrt0.o%s}%{!pg:crt0.o%s} crtbegin.o%s" 54 55#undef ENDFILE_SPEC 56#define ENDFILE_SPEC "crtend.o%s crtn.o%s" 57 58#undef ASM_SPEC 59#define ASM_SPEC "\ 60%{mrelax:-relax} \ 61%{mg10:--mg10} \ 62%{mg13:--mg13} \ 63%{mg14:--mg14} \ 64%{mrl78:--mg14} \ 65%{mcpu=g10:--mg10} \ 66%{mcpu=g13:--mg13} \ 67%{mcpu=g14:--mg14} \ 68%{mcpu=rl78:--mg14} \ 69" 70 71#undef LINK_SPEC 72#define LINK_SPEC "\ 73%{mrelax:-relax} \ 74%{!r:--gc-sections} \ 75" 76 77#undef LIB_SPEC 78#define LIB_SPEC " \ 79--start-group \ 80-lc \ 81-lsim \ 82%{fprofile-arcs|fprofile-generate|coverage:-lgcov} \ 83--end-group \ 84%{!T*: %{msim:%Trl78-sim.ld}%{!msim:%Trl78.ld}} \ 85" 86 87 88#define BITS_BIG_ENDIAN 0 89#define BYTES_BIG_ENDIAN 0 90#define WORDS_BIG_ENDIAN 0 91 92#ifdef IN_LIBGCC2 93/* This is to get correct SI and DI modes in libgcc2.c (32 and 64 bits). */ 94#define UNITS_PER_WORD 4 95/* We have a problem with libgcc2. It only defines two versions of 96 each function, one for "int" and one for "long long". Ie it assumes 97 that "sizeof (int) == sizeof (long)". For the RL78 this is not true 98 and we need a third set of functions. We explicitly define 99 LIBGCC2_UNITS_PER_WORD here so that it is clear that we are expecting 100 to get the SI and DI versions from the libgcc2.c sources, and we 101 provide our own set of HI functions, which is why this 102 definition is surrounded by #ifndef..#endif. */ 103#ifndef LIBGCC2_UNITS_PER_WORD 104#define LIBGCC2_UNITS_PER_WORD 4 105#endif 106#else 107/* Actual width of a word, in units (bytes). */ 108#define UNITS_PER_WORD 1 109#endif 110 111#define SHORT_TYPE_SIZE 16 112#define INT_TYPE_SIZE 16 113#define LONG_TYPE_SIZE 32 114#define LONG_LONG_TYPE_SIZE 64 115 116#define FLOAT_TYPE_SIZE 32 117#define DOUBLE_TYPE_SIZE 32 /*64*/ 118#define LONG_DOUBLE_TYPE_SIZE 64 /*DOUBLE_TYPE_SIZE*/ 119 120#define DEFAULT_SIGNED_CHAR 0 121 122#define STRICT_ALIGNMENT 1 123#define FUNCTION_BOUNDARY 8 124#define BIGGEST_ALIGNMENT 16 125#define STACK_BOUNDARY 16 126#define PARM_BOUNDARY 16 127 128#define STACK_GROWS_DOWNWARD 1 129#define FRAME_GROWS_DOWNWARD 1 130#define FIRST_PARM_OFFSET(FNDECL) 0 131 132#define MAX_REGS_PER_ADDRESS 1 133 134#define Pmode HImode 135#define POINTER_SIZE 16 136#undef SIZE_TYPE 137#define SIZE_TYPE "unsigned int" 138#undef PTRDIFF_TYPE 139#define PTRDIFF_TYPE "int" 140#undef WCHAR_TYPE 141#define WCHAR_TYPE "long int" 142#undef WCHAR_TYPE_SIZE 143#define WCHAR_TYPE_SIZE BITS_PER_WORD 144#define POINTERS_EXTEND_UNSIGNED 1 145#define FUNCTION_MODE HImode 146#define CASE_VECTOR_MODE Pmode 147#define WORD_REGISTER_OPERATIONS 1 148#define HAS_LONG_COND_BRANCH 0 149#define HAS_LONG_UNCOND_BRANCH 0 150 151#define MOVE_MAX 2 152 153#define ADDR_SPACE_NEAR 1 154#define ADDR_SPACE_FAR 2 155 156#define HAVE_PRE_DECCREMENT 0 157#define HAVE_POST_INCREMENT 0 158 159#define MOVE_RATIO(SPEED) ((SPEED) ? 24 : 16) 160#define SLOW_BYTE_ACCESS 0 161 162#define STORE_FLAG_VALUE 1 163#define LOAD_EXTEND_OP(MODE) ZERO_EXTEND 164 165 166/* The RL78 has four register banks. Normal operation uses RB0 as 167 real registers, RB1 and RB2 as "virtual" registers (because we know 168 they'll be there, and not used as variables), and RB3 is reserved 169 for interrupt handlers. The virtual registers are accessed as 170 SADDRs: 171 172 FFEE0-FFEE7 RB0 173 FFEE8-FFEEF RB1 174 FFEF0-FFEF7 RB2 175 FFEF8-FFEFF RB3 176*/ 177#define REGISTER_NAMES \ 178 { \ 179 "x", "a", "c", "b", "e", "d", "l", "h", \ 180 "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", \ 181 "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23", \ 182 "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31", \ 183 "sp", "ap", "psw", "es", "cs" \ 184 } 185 186#define ADDITIONAL_REGISTER_NAMES \ 187{ \ 188{ "ax", 0 }, \ 189{ "bc", 2 }, \ 190{ "de", 4 }, \ 191{ "hl", 6 }, \ 192{ "rp0", 0 }, \ 193{ "rp1", 2 }, \ 194{ "rp2", 4 }, \ 195{ "rp3", 6 }, \ 196{ "r0", 0 }, \ 197{ "r1", 1 }, \ 198{ "r2", 2 }, \ 199{ "r3", 3 }, \ 200{ "r4", 4 }, \ 201{ "r5", 5 }, \ 202{ "r6", 6 }, \ 203{ "r7", 7 }, \ 204} 205 206enum reg_class 207{ 208 NO_REGS, /* No registers in set. */ 209 XREG, 210 AREG, 211 AXREG, 212 CREG, 213 BREG, 214 BCREG, 215 EREG, 216 DREG, 217 DEREG, 218 LREG, 219 HREG, 220 HLREG, 221 IDX_REGS, 222 QI_REGS, 223 SPREG, 224 R8W_REGS, 225 R10W_REGS, 226 INT_REGS, 227 V_REGS, /* Virtual registers. */ 228 GR_REGS, /* Integer registers. */ 229 PSWREG, 230 ALL_REGS, /* All registers. */ 231 LIM_REG_CLASSES /* Max value + 1. */ 232}; 233 234#define REG_CLASS_NAMES \ 235{ \ 236 "NO_REGS", \ 237 "XREG", \ 238 "AREG", \ 239 "AXREG", \ 240 "CREG", \ 241 "BREG", \ 242 "BCREG", \ 243 "EREG", \ 244 "DREG", \ 245 "DEREG", \ 246 "LREG", \ 247 "HREG", \ 248 "HLREG", \ 249 "IDX_REGS", \ 250 "QI_REGS", \ 251 "SPREG", \ 252 "R8W_REGS", \ 253 "R10W_REGS", \ 254 "INT_REGS", \ 255 "V_REGS", \ 256 "GR_REGS", \ 257 "PSWREG", \ 258 "ALL_REGS" \ 259} 260 261/* Note that no class may include the second register in $fp, because 262 we treat $fp as a single HImode register. */ 263#define REG_CLASS_CONTENTS \ 264{ \ 265 { 0x00000000, 0x00000000 }, /* No registers, */ \ 266 { 0x00000001, 0x00000000 }, \ 267 { 0x00000002, 0x00000000 }, \ 268 { 0x00000003, 0x00000000 }, \ 269 { 0x00000004, 0x00000000 }, \ 270 { 0x00000008, 0x00000000 }, \ 271 { 0x0000000c, 0x00000000 }, \ 272 { 0x00000010, 0x00000000 }, \ 273 { 0x00000020, 0x00000000 }, \ 274 { 0x00000030, 0x00000000 }, \ 275 { 0x00000040, 0x00000000 }, \ 276 { 0x00000080, 0x00000000 }, \ 277 { 0x000000c0, 0x00000000 }, \ 278 { 0x0000000c, 0x00000000 }, /* B and C - index regs. */ \ 279 { 0x000000ff, 0x00000000 }, /* all real registers. */ \ 280 { 0x00000000, 0x00000001 }, /* SP */ \ 281 { 0x00000300, 0x00000000 }, /* R8 - HImode */ \ 282 { 0x00000c00, 0x00000000 }, /* R10 - HImode */ \ 283 { 0xff000000, 0x00000000 }, /* INT - HImode */ \ 284 { 0xff7fff00, 0x00000000 }, /* Virtual registers. */ \ 285 { 0xff7fff00, 0x00000002 }, /* General registers. */ \ 286 { 0x04000000, 0x00000004 }, /* PSW. */ \ 287 { 0xff7fffff, 0x0000001f } /* All registers. */ \ 288} 289 290#define TARGET_SMALL_REGISTER_CLASSES_FOR_MODE_P hook_bool_mode_true 291#define N_REG_CLASSES (int) LIM_REG_CLASSES 292#define CLASS_MAX_NREGS(CLASS, MODE) ((GET_MODE_SIZE (MODE) \ 293 + UNITS_PER_WORD - 1) \ 294 / UNITS_PER_WORD) 295 296#define GENERAL_REGS GR_REGS 297#define BASE_REG_CLASS V_REGS 298#define INDEX_REG_CLASS V_REGS 299 300#define FIRST_PSEUDO_REGISTER 37 301 302#define REGNO_REG_CLASS(REGNO) ((REGNO) < FIRST_PSEUDO_REGISTER \ 303 ? GR_REGS : NO_REGS) 304 305#define FRAME_POINTER_REGNUM 22 306#define STACK_POINTER_REGNUM 32 307#define ARG_POINTER_REGNUM 33 308#define CC_REGNUM 34 309#define FUNC_RETURN_REGNUM 8 310#define STATIC_CHAIN_REGNUM 14 311 312/* Trampolines are implemented with a separate data stack. The memory 313 on stack only holds the function pointer for the chosen stub. 314 */ 315 316#define TRAMPOLINE_SIZE 4 317#define TRAMPOLINE_ALIGNMENT 16 318 319#define ELIMINABLE_REGS \ 320{{ ARG_POINTER_REGNUM, STACK_POINTER_REGNUM }, \ 321 { ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM }, \ 322 { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM }} 323 324#define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \ 325 (OFFSET) = rl78_initial_elimination_offset ((FROM), (TO)) 326 327 328#define FUNCTION_ARG_REGNO_P(N) 0 329#define FUNCTION_VALUE_REGNO_P(N) ((N) == 8) 330#define DEFAULT_PCC_STRUCT_RETURN 0 331 332#define FIXED_REGISTERS \ 333{ \ 334 1,1,1,1, 1,1,1,1, \ 335 0,0,0,0, 0,0,0,0, \ 336 0,0,0,0, 0,0,1,1, \ 337 1,1,1,1, 1,1,1,1, \ 338 0, 1, 0, 1, 1 \ 339} 340 341#define CALL_USED_REGISTERS \ 342{ \ 343 1,1,1,1, 1,1,1,1, \ 344 1,1,1,1, 1,1,1,1, \ 345 0,0,0,0, 0,0,1,1, \ 346 1,1,1,1, 1,1,1,1, \ 347 0, 1, 1, 1, 1 \ 348} 349 350#define LIBCALL_VALUE(MODE) \ 351 gen_rtx_REG ((MODE), \ 352 FUNC_RETURN_REGNUM) 353 354/* Order of allocation of registers. */ 355 356#define REG_ALLOC_ORDER \ 357 { 8, 9, 10, 11, 12, 13, 14, 15, \ 358 16, 17, 18, 19, 20, 21, 22, 23, \ 359 0, 1, 6, 7, 2, 3, 4, 5, \ 360 24, 25, 26, 27, 28, 29, 30, 31, \ 361 32, 33, 34 \ 362} 363 364#define REGNO_IN_RANGE(REGNO, MIN, MAX) \ 365 (IN_RANGE ((REGNO), (MIN), (MAX)) \ 366 || (reg_renumber != NULL \ 367 && reg_renumber[(REGNO)] >= (MIN) \ 368 && reg_renumber[(REGNO)] <= (MAX))) 369 370#ifdef REG_OK_STRICT 371#define REGNO_OK_FOR_BASE_P(regno) REGNO_IN_RANGE (regno, 16, 31) 372#else 373#define REGNO_OK_FOR_BASE_P(regno) 1 374#endif 375 376#define REGNO_OK_FOR_INDEX_P(regno) REGNO_OK_FOR_BASE_P (regno) 377 378#define REGNO_MODE_CODE_OK_FOR_BASE_P(regno, mode, address_space, outer_code, index_code) \ 379 rl78_regno_mode_code_ok_for_base_p (regno, mode, address_space, outer_code, index_code) 380 381#define MODE_CODE_BASE_REG_CLASS(mode, address_space, outer_code, index_code) \ 382 rl78_mode_code_base_reg_class (mode, address_space, outer_code, index_code) 383 384#define RETURN_ADDR_RTX(COUNT, FRAMEADDR) \ 385 ((COUNT) == 0 \ 386 ? gen_rtx_MEM (Pmode, gen_rtx_PLUS (HImode, arg_pointer_rtx, GEN_INT (-4))) \ 387 : NULL_RTX) 388 389#define INCOMING_RETURN_ADDR_RTX gen_rtx_MEM (Pmode, stack_pointer_rtx) 390 391#define ACCUMULATE_OUTGOING_ARGS 1 392 393typedef unsigned int CUMULATIVE_ARGS; 394 395#define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, INDIRECT, N_NAMED_ARGS) \ 396 (CUM) = 0 397 398 399/* FIXME */ 400#define NO_PROFILE_COUNTERS 1 401#define PROFILE_BEFORE_PROLOGUE 1 402 403#define FUNCTION_PROFILER(FILE, LABELNO) \ 404 fprintf (FILE, "\tbsr\t__mcount\n"); 405 406 407#define TEXT_SECTION_ASM_OP ".text" 408#define DATA_SECTION_ASM_OP ".data" 409#define BSS_SECTION_ASM_OP ".bss" 410#define CTORS_SECTION_ASM_OP ".section \".ctors\",\"a\"" 411#define DTORS_SECTION_ASM_OP ".section \".dtors\",\"a\"" 412 413#define ASM_COMMENT_START " ;" 414#define ASM_APP_ON "" 415#define ASM_APP_OFF "" 416#define LOCAL_LABEL_PREFIX ".L" 417#undef USER_LABEL_PREFIX 418#define USER_LABEL_PREFIX "_" 419 420#define GLOBAL_ASM_OP "\t.global\t" 421 422#define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \ 423 fprintf (FILE, "\t.long .L%d\n", VALUE) 424 425/* This is how to output an element of a case-vector that is relative. 426 Note: The local label referenced by the "3b" below is emitted by 427 the tablejump insn. */ 428 429#define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, BODY, VALUE, REL) \ 430 fprintf (FILE, "\t.long .L%d - 1b\n", VALUE) 431 432 433#define ASM_OUTPUT_SYMBOL_REF(FILE, SYM) rl78_output_symbol_ref ((FILE), (SYM)) 434 435#define ASM_OUTPUT_LABELREF(FILE, SYM) rl78_output_labelref ((FILE), (SYM)) 436 437#define ASM_OUTPUT_ALIGNED_DECL_COMMON(STREAM, DECL, NAME, SIZE, ALIGNMENT) \ 438 rl78_output_aligned_common (STREAM, DECL, NAME, SIZE, ALIGNMENT, 1) 439 440#define ASM_OUTPUT_ALIGNED_DECL_LOCAL(STREAM, DECL, NAME, SIZE, ALIGNMENT) \ 441 rl78_output_aligned_common (STREAM, DECL, NAME, SIZE, ALIGNMENT, 0) 442 443#define ASM_OUTPUT_ALIGN(STREAM, LOG) \ 444 do \ 445 { \ 446 if ((LOG) == 0) \ 447 break; \ 448 fprintf (STREAM, "\t.balign %d\n", 1 << (LOG)); \ 449 } \ 450 while (0) 451 452/* For PIC put jump tables into the text section so that the offsets that 453 they contain are always computed between two same-section symbols. */ 454#define JUMP_TABLES_IN_TEXT_SECTION (flag_pic) 455 456/* This is a version of REG_P that also returns TRUE for SUBREGs. */ 457#define RL78_REG_P(rtl) (REG_P (rtl) || GET_CODE (rtl) == SUBREG) 458 459/* Like REG_P except that this macro is true for SET expressions. */ 460#define SET_P(rtl) (GET_CODE (rtl) == SET) 461 462#undef PREFERRED_DEBUGGING_TYPE 463#define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG 464 465#undef DWARF2_ADDR_SIZE 466#define DWARF2_ADDR_SIZE 4 467 468#define DWARF2_ASM_LINE_DEBUG_INFO 1 469 470#define EXIT_IGNORE_STACK 0 471#define INCOMING_FRAME_SP_OFFSET 4 472 473 474#define BRANCH_COST(SPEED,PREDICT) 1 475#define REGISTER_MOVE_COST(MODE,FROM,TO) 2 476 477#define EH_RETURN_DATA_REGNO(N) (N < 2 ? (8+(N)*2) : INVALID_REGNUM) 478#define EH_RETURN_STACKADJ_RTX gen_rtx_REG (HImode, 20) 479 480#define ASM_PREFERRED_EH_DATA_FORMAT(CODE,GLOBAL) DW_EH_PE_udata4 481 482/* NOTE: defined but zero means dwarf2 debugging, but sjlj EH. */ 483#define DWARF2_UNWIND_INFO 0 484 485#define REGISTER_TARGET_PRAGMAS() rl78_register_pragmas() 486