1/* Target Definitions for R8C/M16C/M32C 2 Copyright (C) 2005-2020 Free Software Foundation, Inc. 3 Contributed by Red Hat. 4 5 This file is part of GCC. 6 7 GCC is free software; you can redistribute it and/or modify it 8 under the terms of the GNU General Public License as published 9 by the Free Software Foundation; either version 3, or (at your 10 option) any later version. 11 12 GCC is distributed in the hope that it will be useful, but WITHOUT 13 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 14 or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public 15 License for more details. 16 17 You should have received a copy of the GNU General Public License 18 along with GCC; see the file COPYING3. If not see 19 <http://www.gnu.org/licenses/>. */ 20 21#ifndef GCC_M32C_H 22#define GCC_M32C_H 23 24/* Controlling the Compilation Driver, `gcc'. */ 25 26#undef STARTFILE_SPEC 27#define STARTFILE_SPEC "crt0.o%s crtbegin.o%s" 28 29#undef ENDFILE_SPEC 30#define ENDFILE_SPEC "crtend.o%s crtn.o%s" 31 32#undef LINK_SPEC 33#define LINK_SPEC "%{h*} %{v:-V} \ 34 %{static:-Bstatic} %{shared:-shared} %{symbolic:-Bsymbolic}" 35 36/* There are four CPU series we support, but they basically break down 37 into two families - the R8C/M16C families, with 16-bit address 38 registers and one set of opcodes, and the M32CM/M32C group, with 39 24-bit address registers and a different set of opcodes. The 40 assembler doesn't care except for which opcode set is needed; the 41 big difference is in the memory maps, which we cover in 42 LIB_SPEC. */ 43 44#undef ASM_SPEC 45#define ASM_SPEC "\ 46%{mcpu=r8c:--m16c} \ 47%{mcpu=m16c:--m16c} \ 48%{mcpu=m32cm:--m32c} \ 49%{mcpu=m32c:--m32c} " 50 51/* The default is R8C hardware. We support a simulator, which has its 52 own libgloss and link map, plus one default link map for each chip 53 family. Most of the logic here is making sure we do the right 54 thing when no CPU is specified, which defaults to R8C. */ 55#undef LIB_SPEC 56#define LIB_SPEC "-( -lc %{msim:-lsim}%{!msim:-lnosys} -) \ 57%{msim:%{!T*: %{mcpu=m32cm:%Tsim24.ld}%{mcpu=m32c:%Tsim24.ld} \ 58 %{!mcpu=m32cm:%{!mcpu=m32c:%Tsim16.ld}}}} \ 59%{!T*:%{!msim: %{mcpu=m16c:%Tm16c.ld} \ 60 %{mcpu=m32cm:%Tm32cm.ld} \ 61 %{mcpu=m32c:%Tm32c.ld} \ 62 %{!mcpu=m16c:%{!mcpu=m32cm:%{!mcpu=m32c:%Tr8c.ld}}}}} \ 63" 64 65/* Run-time Target Specification */ 66 67/* Nothing unusual here. */ 68#define TARGET_CPU_CPP_BUILTINS() \ 69 { \ 70 builtin_assert ("cpu=m32c"); \ 71 builtin_assert ("machine=m32c"); \ 72 builtin_define ("__m32c__=1"); \ 73 if (TARGET_R8C) \ 74 builtin_define ("__r8c_cpu__=1"); \ 75 if (TARGET_M16C) \ 76 builtin_define ("__m16c_cpu__=1"); \ 77 if (TARGET_M32CM) \ 78 builtin_define ("__m32cm_cpu__=1"); \ 79 if (TARGET_M32C) \ 80 builtin_define ("__m32c_cpu__=1"); \ 81 } 82 83/* The pragma handlers need to know if we've started processing 84 functions yet, as the memregs pragma should only be given at the 85 beginning of the file. This variable starts off TRUE and later 86 becomes FALSE. */ 87extern int ok_to_change_target_memregs; 88 89/* TARGET_CPU is a multi-way option set in m32c.opt. While we could 90 use enums or defines for this, this and m32c.opt are the only 91 places that know (or care) what values are being used. */ 92#define TARGET_R8C (target_cpu == 'r') 93#define TARGET_M16C (target_cpu == '6') 94#define TARGET_M32CM (target_cpu == 'm') 95#define TARGET_M32C (target_cpu == '3') 96 97/* Address register sizes. Warning: these are used all over the place 98 to select between the two CPU families in general. */ 99#define TARGET_A16 (TARGET_R8C || TARGET_M16C) 100#define TARGET_A24 (TARGET_M32CM || TARGET_M32C) 101 102/* Defining data structures for per-function information */ 103 104typedef struct GTY (()) machine_function 105{ 106 /* How much we adjust the stack when returning from an exception 107 handler. */ 108 rtx eh_stack_adjust; 109 110 /* TRUE if the current function is an interrupt handler. */ 111 int is_interrupt; 112 113 /* TRUE if the current function is a leaf function. Currently, this 114 only affects saving $a0 in interrupt functions. */ 115 int is_leaf; 116 117 /* Bitmask that keeps track of which registers are used in an 118 interrupt function, so we know which ones need to be saved and 119 restored. */ 120 int intr_pushm; 121 /* Likewise, one element for each memreg that needs to be saved. */ 122 char intr_pushmem[16]; 123 124 /* TRUE if the current function can use a simple RTS to return, instead 125 of the longer ENTER/EXIT pair. */ 126 int use_rts; 127} 128machine_function; 129 130#define INIT_EXPANDERS m32c_init_expanders () 131 132/* Storage Layout */ 133 134#define BITS_BIG_ENDIAN 0 135#define BYTES_BIG_ENDIAN 0 136#define WORDS_BIG_ENDIAN 0 137 138/* We can do QI, HI, and SI operations pretty much equally well, but 139 GCC expects us to have a "native" format, so we pick the one that 140 matches "int". Pointers are 16 bits for R8C/M16C (when TARGET_A16 141 is true) and 24 bits for M32CM/M32C (when TARGET_A24 is true), but 142 24-bit pointers are stored in 32-bit words. */ 143#define UNITS_PER_WORD 2 144#define POINTER_SIZE (TARGET_A16 ? 16 : 32) 145#define POINTERS_EXTEND_UNSIGNED 1 146/* We have a problem with libgcc2. It only defines two versions of 147 each function, one for "int" and one for "long long". Ie it assumes 148 that "sizeof (int) == sizeof (long)". For the M32C this is not true 149 and we need a third set of functions. We explicitly define 150 LIBGCC2_UNITS_PER_WORD here so that it is clear that we are expecting 151 to get the SI and DI versions from the libgcc2.c sources, and we 152 provide our own set of HI functions in m32c-lib2.c, which is why this 153 definition is surrounded by #ifndef..#endif. */ 154#ifndef LIBGCC2_UNITS_PER_WORD 155#define LIBGCC2_UNITS_PER_WORD 4 156#endif 157 158/* These match the alignment enforced by the two types of stack operations. */ 159#define PARM_BOUNDARY (TARGET_A16 ? 8 : 16) 160#define STACK_BOUNDARY (TARGET_A16 ? 8 : 16) 161 162/* We do this because we care more about space than about speed. For 163 the chips with 16-bit busses, we could set these to 16 if 164 desired. */ 165#define FUNCTION_BOUNDARY 8 166#define BIGGEST_ALIGNMENT 8 167 168/* Since we have a maximum structure alignment of 8 there 169 is no need to enforce any alignment of bitfield types. */ 170#undef PCC_BITFIELD_TYPE_MATTERS 171#define PCC_BITFIELD_TYPE_MATTERS 0 172 173#define STRICT_ALIGNMENT 0 174#define SLOW_BYTE_ACCESS 1 175 176/* Layout of Source Language Data Types */ 177 178#define INT_TYPE_SIZE 16 179#define SHORT_TYPE_SIZE 16 180#define LONG_TYPE_SIZE 32 181#define LONG_LONG_TYPE_SIZE 64 182 183#define FLOAT_TYPE_SIZE 32 184#define DOUBLE_TYPE_SIZE 64 185#define LONG_DOUBLE_TYPE_SIZE 64 186 187#define DEFAULT_SIGNED_CHAR 1 188 189#undef PTRDIFF_TYPE 190#define PTRDIFF_TYPE (TARGET_A16 ? "int" : "long int") 191 192#undef UINTPTR_TYPE 193#define UINTPTR_TYPE (TARGET_A16 ? "unsigned int" : "long unsigned int") 194 195#undef SIZE_TYPE 196#define SIZE_TYPE "unsigned int" 197 198#undef WCHAR_TYPE 199#define WCHAR_TYPE "long int" 200 201#undef WCHAR_TYPE_SIZE 202#define WCHAR_TYPE_SIZE 32 203 204/* REGISTER USAGE */ 205 206/* Register Basics */ 207 208/* Register layout: 209 210 [r0h][r0l] $r0 (16 bits, or two 8-bit halves) 211 [--------] $r2 (16 bits) 212 [r1h][r1l] $r1 (16 bits, or two 8-bit halves) 213 [--------] $r3 (16 bits) 214 [---][--------] $a0 (might be 24 bits) 215 [---][--------] $a1 (might be 24 bits) 216 [---][--------] $sb (might be 24 bits) 217 [---][--------] $fb (might be 24 bits) 218 [---][--------] $sp (might be 24 bits) 219 [-------------] $pc (20 or 24 bits) 220 [---] $flg (CPU flags) 221 [---][--------] $argp (virtual) 222 [--------] $mem0 (all 16 bits) 223 . . . 224 [--------] $mem14 225*/ 226 227#define FIRST_PSEUDO_REGISTER 20 228 229/* Note that these two tables are modified based on which CPU family 230 you select; see m32c_conditional_register_usage for details. */ 231 232/* r0 r2 r1 r3 - a0 a1 sb fb - sp pc flg argp - mem0..mem14 */ 233#define FIXED_REGISTERS { 0, 0, 0, 0, \ 234 0, 0, 1, 0, \ 235 1, 1, 0, 1, \ 236 0, 0, 0, 0, 0, 0, 0, 0 } 237#define CALL_USED_REGISTERS { 1, 1, 1, 1, \ 238 1, 1, 1, 0, \ 239 1, 1, 1, 1, \ 240 1, 1, 1, 1, 1, 1, 1, 1 } 241 242/* The *_REGNO theme matches m32c.md and most register number 243 arguments; the PC_REGNUM is the odd one out. */ 244#ifndef PC_REGNO 245#define PC_REGNO 9 246#endif 247#define PC_REGNUM PC_REGNO 248 249/* Order of Allocation of Registers */ 250 251#define REG_ALLOC_ORDER { \ 252 0, 1, 2, 3, 4, 5, /* r0..r3, a0, a1 */ \ 253 12, 13, 14, 15, 16, 17, 18, 19, /* mem0..mem7 */ \ 254 6, 7, 8, 9, 10, 11 /* sb, fb, sp, pc, flg, ap */ } 255 256/* How Values Fit in Registers */ 257 258#define AVOID_CCMODE_COPIES 259 260/* Register Classes */ 261 262/* Most registers are special purpose in some form or another, so this 263 table is pretty big. Class names are used for constraints also; 264 for example the HL_REGS class (HL below) is "Rhl" in the md files. 265 See m32c_reg_class_from_constraint for the mapping. There's some 266 duplication so that we can better isolate the reason for using 267 constraints in the md files from the actual registers used; for 268 example we may want to exclude a1a0 from SI_REGS in the future, 269 without precluding their use as HImode registers. */ 270 271/* m7654 - m3210 - argp flg pc sp - fb sb a1 a0 - r3 r1 r2 r0 */ 272/* mmPAR */ 273#define REG_CLASS_CONTENTS \ 274{ { 0x00000000 }, /* NO */\ 275 { 0x00000100 }, /* SP - sp */\ 276 { 0x00000080 }, /* FB - fb */\ 277 { 0x00000040 }, /* SB - sb */\ 278 { 0x000001c0 }, /* CR - sb fb sp */\ 279 { 0x00000001 }, /* R0 - r0 */\ 280 { 0x00000004 }, /* R1 - r1 */\ 281 { 0x00000002 }, /* R2 - r2 */\ 282 { 0x00000008 }, /* R3 - r3 */\ 283 { 0x00000003 }, /* R02 - r0r2 */\ 284 { 0x0000000c }, /* R13 - r1r3 */\ 285 { 0x00000005 }, /* HL - r0 r1 */\ 286 { 0x0000000a }, /* R23 - r2 r3 */\ 287 { 0x0000000f }, /* R03 - r0r2 r1r3 */\ 288 { 0x00000010 }, /* A0 - a0 */\ 289 { 0x00000020 }, /* A1 - a1 */\ 290 { 0x00000030 }, /* A - a0 a1 */\ 291 { 0x000000f0 }, /* AD - a0 a1 sb fp */\ 292 { 0x000001f0 }, /* PS - a0 a1 sb fp sp */\ 293 { 0x00000033 }, /* R02A - r0r2 a0 a1 */ \ 294 { 0x0000003f }, /* RA - r0 r1 r2 r3 a0 a1 */\ 295 { 0x0000007f }, /* GENERAL */\ 296 { 0x00000400 }, /* FLG */\ 297 { 0x000001ff }, /* HC - r0l r1 r2 r3 a0 a1 sb fb sp */\ 298 { 0x000ff000 }, /* MEM */\ 299 { 0x000ff003 }, /* R02_A_MEM */\ 300 { 0x000ff005 }, /* A_HL_MEM */\ 301 { 0x000ff00c }, /* R1_R3_A_MEM */\ 302 { 0x000ff00f }, /* R03_MEM */\ 303 { 0x000ff03f }, /* A_HI_MEM */\ 304 { 0x000ff0ff }, /* A_AD_CR_MEM_SI */\ 305 { 0x000ff5ff }, /* ALL */\ 306} 307 308#define QI_REGS HL_REGS 309#define HI_REGS RA_REGS 310#define SI_REGS R03_REGS 311#define DI_REGS R03_REGS 312 313enum reg_class 314{ 315 NO_REGS, 316 SP_REGS, 317 FB_REGS, 318 SB_REGS, 319 CR_REGS, 320 R0_REGS, 321 R1_REGS, 322 R2_REGS, 323 R3_REGS, 324 R02_REGS, 325 R13_REGS, 326 HL_REGS, 327 R23_REGS, 328 R03_REGS, 329 A0_REGS, 330 A1_REGS, 331 A_REGS, 332 AD_REGS, 333 PS_REGS, 334 R02A_REGS, 335 RA_REGS, 336 GENERAL_REGS, 337 FLG_REGS, 338 HC_REGS, 339 MEM_REGS, 340 R02_A_MEM_REGS, 341 A_HL_MEM_REGS, 342 R1_R3_A_MEM_REGS, 343 R03_MEM_REGS, 344 A_HI_MEM_REGS, 345 A_AD_CR_MEM_SI_REGS, 346 ALL_REGS, 347 LIM_REG_CLASSES 348}; 349 350#define N_REG_CLASSES LIM_REG_CLASSES 351 352#define REG_CLASS_NAMES {\ 353"NO_REGS", \ 354"SP_REGS", \ 355"FB_REGS", \ 356"SB_REGS", \ 357"CR_REGS", \ 358"R0_REGS", \ 359"R1_REGS", \ 360"R2_REGS", \ 361"R3_REGS", \ 362"R02_REGS", \ 363"R13_REGS", \ 364"HL_REGS", \ 365"R23_REGS", \ 366"R03_REGS", \ 367"A0_REGS", \ 368"A1_REGS", \ 369"A_REGS", \ 370"AD_REGS", \ 371"PS_REGS", \ 372"R02A_REGS", \ 373"RA_REGS", \ 374"GENERAL_REGS", \ 375"FLG_REGS", \ 376"HC_REGS", \ 377"MEM_REGS", \ 378"R02_A_MEM_REGS", \ 379"A_HL_MEM_REGS", \ 380"R1_R3_A_MEM_REGS", \ 381"R03_MEM_REGS", \ 382"A_HI_MEM_REGS", \ 383"A_AD_CR_MEM_SI_REGS", \ 384"ALL_REGS", \ 385} 386 387#define REGNO_REG_CLASS(R) m32c_regno_reg_class (R) 388 389/* We support simple displacements off address registers, nothing else. */ 390#define BASE_REG_CLASS A_REGS 391#define INDEX_REG_CLASS NO_REGS 392 393/* We primarily use the new "long" constraint names, with the initial 394 letter classifying the constraint type and following letters 395 specifying which. The types are: 396 397 I - integer values 398 R - register classes 399 S - memory references (M was used) 400 A - addresses (currently unused) 401*/ 402 403#define REGNO_OK_FOR_BASE_P(NUM) m32c_regno_ok_for_base_p (NUM) 404#define REGNO_OK_FOR_INDEX_P(NUM) 0 405 406#define LIMIT_RELOAD_CLASS(MODE,CLASS) \ 407 (enum reg_class) m32c_limit_reload_class (MODE, CLASS) 408 409#define SECONDARY_RELOAD_CLASS(CLASS,MODE,X) \ 410 (enum reg_class) m32c_secondary_reload_class (CLASS, MODE, X) 411 412#define TARGET_SMALL_REGISTER_CLASSES_FOR_MODE_P hook_bool_mode_true 413 414/* STACK AND CALLING */ 415 416/* Frame Layout */ 417 418/* Standard push/pop stack, no surprises here. */ 419 420#define STACK_GROWS_DOWNWARD 1 421#define STACK_PUSH_CODE PRE_DEC 422#define FRAME_GROWS_DOWNWARD 1 423 424#define FIRST_PARM_OFFSET(F) 0 425 426#define RETURN_ADDR_RTX(COUNT,FA) m32c_return_addr_rtx (COUNT) 427 428#define INCOMING_RETURN_ADDR_RTX m32c_incoming_return_addr_rtx() 429#define INCOMING_FRAME_SP_OFFSET (TARGET_A24 ? 4 : 3) 430 431/* Exception Handling Support */ 432 433#define EH_RETURN_DATA_REGNO(N) m32c_eh_return_data_regno (N) 434#define EH_RETURN_STACKADJ_RTX m32c_eh_return_stackadj_rtx () 435 436/* Registers That Address the Stack Frame */ 437 438#ifndef FP_REGNO 439#define FP_REGNO 7 440#endif 441#ifndef SP_REGNO 442#define SP_REGNO 8 443#endif 444#define AP_REGNO 11 445 446#define STACK_POINTER_REGNUM SP_REGNO 447#define FRAME_POINTER_REGNUM FP_REGNO 448#define ARG_POINTER_REGNUM AP_REGNO 449 450/* The static chain must be pointer-capable. */ 451#define STATIC_CHAIN_REGNUM A0_REGNO 452 453#define DWARF_FRAME_REGISTERS 20 454#define DWARF_FRAME_REGNUM(N) m32c_dwarf_frame_regnum (N) 455#define DBX_REGISTER_NUMBER(N) m32c_dwarf_frame_regnum (N) 456 457#undef ASM_PREFERRED_EH_DATA_FORMAT 458/* This is the same as the default in practice, except that by making 459 it explicit we tell binutils what size pointers to use. */ 460#define ASM_PREFERRED_EH_DATA_FORMAT(CODE,GLOBAL) \ 461 (TARGET_A16 ? DW_EH_PE_udata2 : DW_EH_PE_udata4) 462 463/* Eliminating Frame Pointer and Arg Pointer */ 464 465#define ELIMINABLE_REGS \ 466 {{AP_REGNO, SP_REGNO}, \ 467 {AP_REGNO, FB_REGNO}, \ 468 {FB_REGNO, SP_REGNO}} 469 470#define INITIAL_ELIMINATION_OFFSET(FROM,TO,VAR) \ 471 (VAR) = m32c_initial_elimination_offset(FROM,TO) 472 473/* Passing Function Arguments on the Stack */ 474 475#define PUSH_ARGS 1 476#define PUSH_ROUNDING(N) m32c_push_rounding (N) 477#define CALL_POPS_ARGS(C) 0 478 479/* Passing Arguments in Registers */ 480 481typedef struct m32c_cumulative_args 482{ 483 /* For address of return value buffer (structures are returned by 484 passing the address of a buffer as an invisible first argument. 485 This identifies it). If set, the current parameter will be put 486 on the stack, regardless of type. */ 487 int force_mem; 488 /* First parm is 1, parm 0 is hidden pointer for returning 489 aggregates. */ 490 int parm_num; 491} m32c_cumulative_args; 492 493#define CUMULATIVE_ARGS m32c_cumulative_args 494#define INIT_CUMULATIVE_ARGS(CA,FNTYPE,LIBNAME,FNDECL,N_NAMED_ARGS) \ 495 m32c_init_cumulative_args (&(CA),FNTYPE,LIBNAME,FNDECL,N_NAMED_ARGS) 496#define FUNCTION_ARG_REGNO_P(r) m32c_function_arg_regno_p (r) 497 498/* How Large Values Are Returned */ 499 500#define DEFAULT_PCC_STRUCT_RETURN 1 501 502/* Function Entry and Exit */ 503 504#define EXIT_IGNORE_STACK 0 505#define EPILOGUE_USES(REGNO) m32c_epilogue_uses(REGNO) 506#define EH_USES(REGNO) 0 /* FIXME */ 507 508/* Generating Code for Profiling */ 509 510#define FUNCTION_PROFILER(FILE,LABELNO) 511 512/* Implementing the Varargs Macros */ 513 514/* Trampolines for Nested Functions */ 515 516#define TRAMPOLINE_SIZE m32c_trampoline_size () 517#define TRAMPOLINE_ALIGNMENT m32c_trampoline_alignment () 518 519/* Addressing Modes */ 520 521#define HAVE_PRE_DECREMENT 1 522#define HAVE_POST_INCREMENT 1 523#define MAX_REGS_PER_ADDRESS 1 524 525/* This is passed to the macros below, so that they can be implemented 526 in m32c.c. */ 527#ifdef REG_OK_STRICT 528#define REG_OK_STRICT_V 1 529#else 530#define REG_OK_STRICT_V 0 531#endif 532 533#define REG_OK_FOR_BASE_P(X) m32c_reg_ok_for_base_p (X, REG_OK_STRICT_V) 534#define REG_OK_FOR_INDEX_P(X) 0 535 536/* #define FIND_BASE_TERM(X) when we do unspecs for symrefs */ 537 538#define LEGITIMIZE_RELOAD_ADDRESS(X,MODE,OPNUM,TYPE,IND_LEVELS,WIN) \ 539 if (m32c_legitimize_reload_address(&(X),MODE,OPNUM,TYPE,IND_LEVELS)) \ 540 goto WIN; 541 542/* Address spaces. */ 543#define ADDR_SPACE_FAR 1 544 545 546/* Condition Code Status */ 547 548#define REVERSIBLE_CC_MODE(MODE) 1 549 550/* Dividing the Output into Sections (Texts, Data, ...) */ 551 552#define TEXT_SECTION_ASM_OP ".text" 553#define DATA_SECTION_ASM_OP ".data" 554#define BSS_SECTION_ASM_OP ".bss" 555 556#define CTOR_LIST_BEGIN 557#define CTOR_LIST_END 558#define DTOR_LIST_BEGIN 559#define DTOR_LIST_END 560#define CTORS_SECTION_ASM_OP "\t.section\t.init_array,\"aw\",%init_array" 561#define DTORS_SECTION_ASM_OP "\t.section\t.fini_array,\"aw\",%fini_array" 562#define INIT_ARRAY_SECTION_ASM_OP "\t.section\t.init_array,\"aw\",%init_array" 563#define FINI_ARRAY_SECTION_ASM_OP "\t.section\t.fini_array,\"aw\",%fini_array" 564 565/* The Overall Framework of an Assembler File */ 566 567#define ASM_COMMENT_START ";" 568#define ASM_APP_ON "" 569#define ASM_APP_OFF "" 570 571/* Output and Generation of Labels */ 572 573#define GLOBAL_ASM_OP "\t.global\t" 574 575/* Output of Assembler Instructions */ 576 577#define REGISTER_NAMES { \ 578 "r0", "r2", "r1", "r3", \ 579 "a0", "a1", "sb", "fb", "sp", \ 580 "pc", "flg", "argp", \ 581 "mem0", "mem2", "mem4", "mem6", "mem8", "mem10", "mem12", "mem14", \ 582} 583 584#define ADDITIONAL_REGISTER_NAMES { \ 585 {"r0l", 0}, \ 586 {"r1l", 2}, \ 587 {"r0r2", 0}, \ 588 {"r1r3", 2}, \ 589 {"a0a1", 4}, \ 590 {"r0r2r1r3", 0} } 591 592#undef USER_LABEL_PREFIX 593#define USER_LABEL_PREFIX "_" 594 595#define ASM_OUTPUT_REG_PUSH(S,R) m32c_output_reg_push (S, R) 596#define ASM_OUTPUT_REG_POP(S,R) m32c_output_reg_pop (S, R) 597 598#define ASM_OUTPUT_ALIGNED_DECL_COMMON(STREAM, DECL, NAME, SIZE, ALIGNMENT) \ 599 m32c_output_aligned_common (STREAM, DECL, NAME, SIZE, ALIGNMENT, 1) 600 601#define ASM_OUTPUT_ALIGNED_DECL_LOCAL(STREAM, DECL, NAME, SIZE, ALIGNMENT) \ 602 m32c_output_aligned_common (STREAM, DECL, NAME, SIZE, ALIGNMENT, 0) 603 604 605/* Output of Dispatch Tables */ 606 607#define ASM_OUTPUT_ADDR_VEC_ELT(S,V) \ 608 fprintf (S, "\t.word L%d\n", V) 609 610/* Assembler Commands for Exception Regions */ 611 612#define DWARF_CIE_DATA_ALIGNMENT -1 613 614/* Assembler Commands for Alignment */ 615 616#define ASM_OUTPUT_ALIGN(STREAM,POWER) \ 617 fprintf (STREAM, "\t.p2align\t%d\n", POWER); 618 619/* Controlling Debugging Information Format */ 620 621#define DWARF2_ADDR_SIZE 4 622 623/* Miscellaneous Parameters */ 624 625#define HAS_LONG_COND_BRANCH false 626#define HAS_LONG_UNCOND_BRANCH true 627#define CASE_VECTOR_MODE SImode 628#define LOAD_EXTEND_OP(MEM) ZERO_EXTEND 629 630#define MOVE_MAX 4 631 632#define STORE_FLAG_VALUE 1 633 634/* 16- or 24-bit pointers */ 635#define Pmode (TARGET_A16 ? HImode : PSImode) 636#define FUNCTION_MODE QImode 637 638#define REGISTER_TARGET_PRAGMAS() m32c_register_pragmas() 639 640#endif 641