configure.ac revision 1.1.1.1.8.2
1# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2# 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 3# Free Software Foundation, Inc. 4# 5# This file is free software; you can redistribute it and/or modify it 6# under the terms of the GNU General Public License as published by 7# the Free Software Foundation; either version 3 of the License, or 8# (at your option) any later version. 9# 10# This program is distributed in the hope that it will be useful, but 11# WITHOUT ANY WARRANTY; without even the implied warranty of 12# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 13# General Public License for more details. 14# 15# You should have received a copy of the GNU General Public License 16# along with this program; see the file COPYING3. If not see 17# <http://www.gnu.org/licenses/>. 18 19############################################################################## 20### WARNING: this file contains embedded tabs. Do not run untabify on this file. 21 22m4_include(config/acx.m4) 23m4_include(config/override.m4) 24m4_include(config/proginstall.m4) 25m4_include(config/elf.m4) 26m4_include([libtool.m4]) 27m4_include([ltoptions.m4]) 28m4_include([ltsugar.m4]) 29m4_include([ltversion.m4]) 30m4_include([lt~obsolete.m4]) 31 32AC_INIT(move-if-change) 33AC_PREREQ(2.64) 34AC_DISABLE_OPTION_CHECKING 35 36progname=$0 37# if PWD already has a value, it is probably wrong. 38if test -n "$PWD" ; then PWD=`${PWDCMD-pwd}`; fi 39 40# Export original configure arguments for use by sub-configures. 41# Quote arguments with shell meta charatcers. 42TOPLEVEL_CONFIGURE_ARGUMENTS= 43set -- "$progname" "$@" 44for ac_arg 45do 46 case "$ac_arg" in 47 *" "*|*" "*|*[[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\']]*) 48 ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` 49 # if the argument is of the form -foo=baz, quote the baz part only 50 ac_arg=`echo "'$ac_arg'" | sed "s/^'\([[-a-zA-Z0-9]]*=\)/\\1'/"` ;; 51 *) ;; 52 esac 53 # Add the quoted argument to the list. 54 TOPLEVEL_CONFIGURE_ARGUMENTS="$TOPLEVEL_CONFIGURE_ARGUMENTS $ac_arg" 55done 56if test "$silent" = yes; then 57 TOPLEVEL_CONFIGURE_ARGUMENTS="$TOPLEVEL_CONFIGURE_ARGUMENTS --silent" 58fi 59# Remove the initial space we just introduced and, as these will be 60# expanded by make, quote '$'. 61TOPLEVEL_CONFIGURE_ARGUMENTS=`echo "x$TOPLEVEL_CONFIGURE_ARGUMENTS" | sed -e 's/^x *//' -e 's,\\$,$$,g'` 62AC_SUBST(TOPLEVEL_CONFIGURE_ARGUMENTS) 63 64# Find the build, host, and target systems. 65ACX_NONCANONICAL_BUILD 66ACX_NONCANONICAL_HOST 67ACX_NONCANONICAL_TARGET 68 69dnl Autoconf 2.5x and later will set a default program prefix if 70dnl --target was used, even if it was the same as --host. Disable 71dnl that behavior. This must be done before AC_CANONICAL_SYSTEM 72dnl to take effect. 73test "$host_noncanonical" = "$target_noncanonical" && 74 test "$program_prefix$program_suffix$program_transform_name" = \ 75 NONENONEs,x,x, && 76 program_transform_name=s,y,y, 77 78AC_CANONICAL_SYSTEM 79AC_ARG_PROGRAM 80 81m4_pattern_allow([^AS_FOR_TARGET$])dnl 82m4_pattern_allow([^AS_FOR_BUILD$])dnl 83 84# Get 'install' or 'install-sh' and its variants. 85AC_PROG_INSTALL 86ACX_PROG_LN 87AC_PROG_LN_S 88AC_PROG_SED 89AC_PROG_AWK 90 91### we might need to use some other shell than /bin/sh for running subshells 92### If we are on Windows, search for the shell. This will permit people 93### to not have /bin/sh, but to be able to see /SOME/PATH/sh configure 94### without also having to set CONFIG_SHELL. This code will work when 95### using bash, which sets OSTYPE. 96case "${OSTYPE}" in 97*win32*) 98 if test x${CONFIG_SHELL} = x ; then 99 if test ! -f /bin/sh ; then 100 if test x${SHELL} != x && test -f ${SHELL} ; then 101 CONFIG_SHELL=${SHELL} 102 export CONFIG_SHELL 103 else 104 for prog in sh sh.exe bash bash.exe; do 105 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" 106 for dir in $PATH; do 107 test -z "$dir" && dir=. 108 if test -f $dir/$prog; then 109 CONFIG_SHELL=$dir/$prog 110 export CONFIG_SHELL 111 break 112 fi 113 done 114 IFS="$save_ifs" 115 test -n "${CONFIG_SHELL}" && break 116 done 117 fi 118 fi 119 fi 120 ;; 121esac 122 123config_shell=${CONFIG_SHELL-/bin/sh} 124 125moveifchange=${srcdir}/move-if-change 126 127srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}` 128 129# We pass INSTALL explicitly to sub-makes. Make sure that it is not 130# a relative path. 131if test "$INSTALL" = "${srcdir}/install-sh -c"; then 132 INSTALL="${srcpwd}/install-sh -c" 133fi 134 135# Set srcdir to "." if that's what it is. 136# This is important for multilib support. 137pwd=`${PWDCMD-pwd}` 138if test "${pwd}" = "${srcpwd}" ; then 139 srcdir=. 140fi 141 142topsrcdir=$srcpwd 143 144extra_host_args= 145 146### To add a new directory to the tree, first choose whether it is a target 147### or a host dependent tool. Then put it into the appropriate list 148### (library or tools, host or target), doing a dependency sort. 149 150# Subdirs will be configured in the order listed in build_configdirs, 151# configdirs, or target_configdirs; see the serialization section below. 152 153# Dependency sorting is only needed when *configuration* must be done in 154# a particular order. In all cases a dependency should be specified in 155# the Makefile, whether or not it's implicitly specified here. 156 157# Double entries in build_configdirs, configdirs, or target_configdirs may 158# cause circular dependencies and break everything horribly. 159 160# these library is used by various programs built for the build 161# environment 162# 163build_libs="build-libiberty" 164 165# these tools are built for the build environment 166build_tools="build-texinfo build-byacc build-flex build-bison build-m4 build-fixincludes" 167 168# these libraries are used by various programs built for the host environment 169# 170host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr mpc ppl cloog libelf libiconv" 171 172# these tools are built for the host environment 173# Note, the powerpc-eabi build depends on sim occurring before gdb in order to 174# know that we are building the simulator. 175# binutils, gas and ld appear in that order because it makes sense to run 176# "make check" in that particular order. 177# If --enable-gold is used, "gold" will replace "ld". 178host_tools="texinfo byacc flex bison binutils gas ld fixincludes gcc cgen sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar gnattools" 179 180# libgcj represents the runtime libraries only used by gcj. 181libgcj="target-libffi \ 182 target-zlib \ 183 target-qthreads \ 184 target-libjava" 185 186# these libraries are built for the target environment, and are built after 187# the host libraries and the host tools (which may be a cross compiler) 188# Note that libiberty is not a target library. 189target_libraries="target-libgcc \ 190 target-libgloss \ 191 target-newlib \ 192 target-libgomp \ 193 target-libstdc++-v3 \ 194 target-libmudflap \ 195 target-libssp \ 196 target-libgfortran \ 197 target-boehm-gc \ 198 ${libgcj} \ 199 target-libobjc \ 200 target-libada" 201 202# these tools are built using the target libraries, and are intended to 203# run only in the target environment 204# 205# note: any program that *uses* libraries that are in the "target_libraries" 206# list belongs in this list. those programs are also very likely 207# candidates for the "native_only" list which follows 208# 209target_tools="target-examples target-groff target-gperf target-rda" 210 211################################################################################ 212 213## All tools belong in one of the four categories, and are assigned above 214## We assign ${configdirs} this way to remove all embedded newlines. This 215## is important because configure will choke if they ever get through. 216## ${configdirs} is directories we build using the host tools. 217## ${target_configdirs} is directories we build using the target tools. 218configdirs=`echo ${host_libs} ${host_tools}` 219target_configdirs=`echo ${target_libraries} ${target_tools}` 220build_configdirs=`echo ${build_libs} ${build_tools}` 221 222m4_divert_text([PARSE_ARGS], 223[ac_subdirs_all=`cd $srcdir && echo */configure | sed 's,/configure,,g'` 224]) 225 226################################################################################ 227 228srcname="gnu development package" 229 230# This gets set non-empty for some net releases of packages. 231appdirs="" 232 233# Define is_cross_compiler to save on calls to 'test'. 234is_cross_compiler= 235if test x"${host}" = x"${target}" ; then 236 is_cross_compiler=no 237else 238 is_cross_compiler=yes 239fi 240 241# Find the build and target subdir names. 242GCC_TOPLEV_SUBDIRS 243# Be sure to cover against remnants of an in-tree build. 244if test $srcdir != . && test -d $srcdir/host-${host_noncanonical}; then 245 AC_MSG_ERROR([building out of tree but $srcdir contains host-${host_noncanonical}. 246Use a pristine source tree when building in a separate tree]) 247fi 248 249# Skipdirs are removed silently. 250skipdirs= 251# Noconfigdirs are removed loudly. 252noconfigdirs="" 253 254use_gnu_ld= 255# Make sure we don't let GNU ld be added if we didn't want it. 256if test x$with_gnu_ld = xno ; then 257 use_gnu_ld=no 258 noconfigdirs="$noconfigdirs ld gold" 259fi 260 261use_gnu_as= 262# Make sure we don't let GNU as be added if we didn't want it. 263if test x$with_gnu_as = xno ; then 264 use_gnu_as=no 265 noconfigdirs="$noconfigdirs gas" 266fi 267 268use_included_zlib= 269# Make sure we don't let ZLIB be added if we didn't want it. 270if test x$with_system_zlib = xyes ; then 271 use_included_zlib=no 272 noconfigdirs="$noconfigdirs zlib" 273fi 274 275# some tools are so dependent upon X11 that if we're not building with X, 276# it's not even worth trying to configure, much less build, that tool. 277 278case ${with_x} in 279 yes | "") ;; # the default value for this tree is that X11 is available 280 no) 281 skipdirs="${skipdirs} tk itcl libgui" 282 # We won't be able to build gdbtk without X. 283 enable_gdbtk=no 284 ;; 285 *) echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2 ;; 286esac 287 288# Some tools are only suitable for building in a "native" situation. 289# Remove these if host!=target. 290native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf" 291 292# Similarly, some are only suitable for cross toolchains. 293# Remove these if host=target. 294cross_only="target-libgloss target-newlib target-opcodes" 295 296case $is_cross_compiler in 297 no) skipdirs="${skipdirs} ${cross_only}" ;; 298 yes) skipdirs="${skipdirs} ${native_only}" ;; 299esac 300 301# If both --with-headers and --with-libs are specified, default to 302# --without-newlib. 303if test x"${with_headers}" != x && test x"${with_headers}" != xno \ 304 && test x"${with_libs}" != x && test x"${with_libs}" != xno ; then 305 if test x"${with_newlib}" = x ; then 306 with_newlib=no 307 fi 308fi 309 310# Recognize --with-newlib/--without-newlib. 311case ${with_newlib} in 312 no) skipdirs="${skipdirs} target-newlib" ;; 313 yes) skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;; 314esac 315 316# Handle --enable-gold. 317 318AC_ARG_ENABLE(gold, 319[ --enable-gold use gold instead of ld], 320ENABLE_GOLD=$enableval, 321ENABLE_GOLD=no) 322if test "${ENABLE_GOLD}" = "yes"; then 323 # Check for ELF target. 324 is_elf=no 325 case "${target}" in 326 *-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \ 327 | *-*-linux* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \ 328 | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-solaris2* | *-*-nto*) 329 case "${target}" in 330 *-*-linux*aout* | *-*-linux*oldld*) 331 ;; 332 *) 333 is_elf=yes 334 ;; 335 esac 336 esac 337 338 if test "$is_elf" = "yes"; then 339 # Check for target supported by gold. 340 case "${target}" in 341 i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-*) 342 configdirs=`echo " ${configdirs} " | sed -e 's/ ld / gold /'` 343 ;; 344 esac 345 fi 346fi 347 348# Configure extra directories which are host specific 349 350case "${host}" in 351 *-cygwin*) 352 configdirs="$configdirs libtermcap" ;; 353esac 354 355# A target can indicate whether a language isn't supported for some reason. 356# Only spaces may be used in this macro; not newlines or tabs. 357unsupported_languages= 358 359# Remove more programs from consideration, based on the host or 360# target this usually means that a port of the program doesn't 361# exist yet. 362 363case "${host}" in 364 hppa*64*-*-*) 365 noconfigdirs="$noconfigdirs byacc" 366 ;; 367 i[[3456789]]86-*-vsta) 368 noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl gnuserv gettext" 369 ;; 370 i[[3456789]]86-*-go32* | i[[3456789]]86-*-msdosdjgpp*) 371 noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl gnuserv libffi" 372 ;; 373 x86_64-*-mingw*) 374 noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool newlib" 375 ;; 376 i[[3456789]]86-*-mingw32*) 377 # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl gnuserv" 378 noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool newlib" 379 ;; 380 i[[3456789]]86-*-beos*) 381 noconfigdirs="$noconfigdirs tk itcl libgui gdb" 382 ;; 383 *-*-cygwin*) 384 noconfigdirs="$noconfigdirs autoconf automake send-pr rcs guile perl" 385 ;; 386 *-*-netbsd*) 387 noconfigdirs="$noconfigdirs rcs" 388 ;; 389 ppc*-*-pe) 390 noconfigdirs="$noconfigdirs patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl gnuserv" 391 ;; 392 powerpc-*-beos*) 393 noconfigdirs="$noconfigdirs tk itcl libgui gdb dejagnu readline" 394 ;; 395esac 396 397 398AC_ARG_ENABLE(libada, 399[ --enable-libada build libada directory], 400ENABLE_LIBADA=$enableval, 401ENABLE_LIBADA=yes) 402if test "${ENABLE_LIBADA}" != "yes" ; then 403 noconfigdirs="$noconfigdirs gnattools" 404fi 405 406AC_ARG_ENABLE(libssp, 407[ --enable-libssp build libssp directory], 408ENABLE_LIBSSP=$enableval, 409ENABLE_LIBSSP=yes) 410 411# Save it here so that, even in case of --enable-libgcj, if the Java 412# front-end isn't enabled, we still get libgcj disabled. 413libgcj_saved=$libgcj 414case $enable_libgcj in 415yes) 416 # If we reset it here, it won't get added to noconfigdirs in the 417 # target-specific build rules, so it will be forcibly enabled 418 # (unless the Java language itself isn't enabled). 419 libgcj= 420 ;; 421no) 422 # Make sure we get it printed in the list of not supported target libs. 423 noconfigdirs="$noconfigdirs ${libgcj}" 424 ;; 425esac 426 427 428# Disable libmudflap on some systems. 429if test x$enable_libmudflap = x ; then 430 case "${target}" in 431 *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | bfin*-*-uclinux* | *-*-kopensolaris*-gnu) 432 # Enable libmudflap by default in GNU and friends. 433 ;; 434 *-*-freebsd*) 435 # Enable libmudflap by default in FreeBSD. 436 ;; 437 *) 438 # Disable it by default everywhere else. 439 noconfigdirs="$noconfigdirs target-libmudflap" 440 ;; 441 esac 442fi 443 444# Disable libgomp on non POSIX hosted systems. 445if test x$enable_libgomp = x ; then 446 # Enable libgomp by default on hosted POSIX systems. 447 case "${target}" in 448 *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu) 449 ;; 450 *-*-netbsd* | *-*-freebsd* | *-*-openbsd*) 451 ;; 452 *-*-solaris2* | *-*-sysv4* | *-*-irix6* | *-*-osf* | *-*-hpux11*) 453 ;; 454 *-*-darwin* | *-*-aix*) 455 ;; 456 *) 457 noconfigdirs="$noconfigdirs target-libgomp" 458 ;; 459 esac 460fi 461 462# Default libgloss CPU subdirectory. 463libgloss_dir="$target_cpu" 464 465case "${target}" in 466 *-*-chorusos) 467 noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}" 468 ;; 469 powerpc-*-darwin*) 470 noconfigdirs="$noconfigdirs ld gas gdb gprof" 471 noconfigdirs="$noconfigdirs sim target-rda" 472 ;; 473 i[[3456789]]86-*-darwin*) 474 noconfigdirs="$noconfigdirs ld gprof" 475 noconfigdirs="$noconfigdirs sim target-rda" 476 ;; 477 x86_64-*-darwin[[912]]*) 478 noconfigdirs="$noconfigdirs ld gas gprof" 479 noconfigdirs="$noconfigdirs sim target-rda" 480 ;; 481 *-*-darwin*) 482 noconfigdirs="$noconfigdirs ld gas gdb gprof" 483 noconfigdirs="$noconfigdirs sim target-rda" 484 noconfigdirs="$noconfigdirs ${libgcj}" 485 ;; 486 *-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*) 487 noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}" 488 ;; 489 *-*-freebsd*) 490 noconfigdirs="$noconfigdirs target-newlib target-libgloss" 491 if test "x$with_gmp" = x && test "x$with_gmp_dir" = x \ 492 && test -f /usr/local/include/gmp.h; then 493 with_gmp=/usr/local 494 fi 495 496 # Skip some stuff that's unsupported on some FreeBSD configurations. 497 case "${target}" in 498 i*86-*-*) ;; 499 alpha*-*-*) ;; 500 x86_64-*-*) ;; 501 *) 502 noconfigdirs="$noconfigdirs ${libgcj}" 503 ;; 504 esac 505 ;; 506 *-*-kaos*) 507 # Remove unsupported stuff on all kaOS configurations. 508 skipdirs="${libgcj} target-libstdc++-v3 target-librx" 509 skipdirs="$skipdirs target-libobjc target-examples target-groff target-gperf" 510 skipdirs="$skipdirs zlib fastjar target-libjava target-boehm-gc target-zlib" 511 noconfigdirs="$noconfigdirs target-libgloss" 512 ;; 513 *-*-netbsd*) 514 # Skip some stuff on all NetBSD configurations. 515 noconfigdirs="$noconfigdirs target-newlib target-libgloss" 516 517 # Skip some stuff that's unsupported on some NetBSD configurations. 518 case "${target}" in 519 i*86-*-netbsdelf*) ;; 520 arm*-*-netbsdelf*) ;; 521 *) 522 noconfigdirs="$noconfigdirs ${libgcj}" 523 ;; 524 esac 525 ;; 526 *-*-netware*) 527 noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj} target-libmudflap" 528 ;; 529 *-*-rtems*) 530 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" 531 ;; 532 # The tpf target doesn't support gdb yet. 533 *-*-tpf*) 534 noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj} target-libmudflap gdb tcl tk libgui itcl" 535 ;; 536 *-*-uclinux*) 537 noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}" 538 ;; 539 *-*-vxworks*) 540 noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libstdc++-v3 ${libgcj}" 541 ;; 542 alpha*-dec-osf*) 543 # ld works, but does not support shared libraries. 544 # newlib is not 64 bit ready. I'm not sure about fileutils. 545 # gas doesn't generate exception information. 546 noconfigdirs="$noconfigdirs gas ld fileutils target-newlib target-libgloss" 547 ;; 548 alpha*-*-*vms*) 549 noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss ${libgcj}" 550 ;; 551 alpha*-*-linux*) 552 # newlib is not 64 bit ready 553 noconfigdirs="$noconfigdirs target-newlib target-libgloss" 554 ;; 555 alpha*-*-*) 556 # newlib is not 64 bit ready 557 noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}" 558 ;; 559 am33_2.0-*-linux*) 560 noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss" 561 ;; 562 sh-*-linux*) 563 noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss" 564 ;; 565 sh*-*-pe|mips*-*-pe|*arm-wince-pe) 566 noconfigdirs="$noconfigdirs ${libgcj}" 567 noconfigdirs="$noconfigdirs target-examples" 568 noconfigdirs="$noconfigdirs texinfo send-pr" 569 noconfigdirs="$noconfigdirs tcl tk itcl libgui sim" 570 noconfigdirs="$noconfigdirs expect dejagnu" 571 # the C++ libraries don't build on top of CE's C libraries 572 noconfigdirs="$noconfigdirs target-libstdc++-v3" 573 noconfigdirs="$noconfigdirs target-newlib" 574 case "${host}" in 575 *-*-cygwin*) ;; # keep gdb and readline 576 *) noconfigdirs="$noconfigdirs gdb readline" 577 ;; 578 esac 579 libgloss_dir=wince 580 ;; 581 arc-*-*) 582 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" 583 ;; 584 arm-semi-aof ) 585 ;; 586 arm-*-coff | strongarm-*-coff | xscale-*-coff) 587 noconfigdirs="$noconfigdirs ${libgcj}" 588 libgloss_dir=arm 589 ;; 590 arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* ) 591 noconfigdirs="$noconfigdirs target-libffi target-qthreads" 592 libgloss_dir=arm 593 ;; 594 arm*-*-linux-gnueabi) 595 noconfigdirs="$noconfigdirs target-qthreads" 596 case ${with_newlib} in 597 no) noconfigdirs="$noconfigdirs target-newlib target-libgloss" 598 esac 599 libgloss_dir=arm 600 ;; 601 arm*-*-symbianelf*) 602 noconfigdirs="$noconfigdirs ${libgcj}" 603 libgloss_dir=arm 604 ;; 605 arm-*-pe*) 606 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" 607 ;; 608 thumb-*-coff) 609 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" 610 ;; 611 thumb-*-elf) 612 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" 613 ;; 614 thumb-*-pe) 615 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" 616 ;; 617 arm-*-riscix*) 618 noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}" 619 ;; 620 avr-*-*) 621 noconfigdirs="$noconfigdirs target-libstdc++-v3 ${libgcj} target-libssp" 622 ;; 623 bfin-*-*) 624 unsupported_languages="$unsupported_languages java" 625 noconfigdirs="$noconfigdirs target-boehm-gc gdb" 626 if test x${is_cross_compiler} != xno ; then 627 target_configdirs="${target_configdirs} target-bsp target-cygmon" 628 fi 629 ;; 630 c4x-*-* | tic4x-*-*) 631 noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}" 632 ;; 633 c54x*-*-* | tic54x-*-*) 634 noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib" 635 ;; 636 cr16-*-*) 637 noconfigdirs="$noconfigdirs ${libgcj} gdb" 638 ;; 639 cris-*-* | crisv32-*-*) 640 unsupported_languages="$unsupported_languages java" 641 case "${target}" in 642 *-*-aout) 643 unsupported_languages="$unsupported_languages fortran" 644 noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";; 645 *-*-elf) 646 noconfigdirs="$noconfigdirs target-boehm-gc";; 647 *-*-linux*) 648 noconfigdirs="$noconfigdirs target-newlib target-libgloss";; 649 *) 650 unsupported_languages="$unsupported_languages fortran" 651 noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss";; 652 esac 653 libgloss_dir=cris 654 ;; 655 crx-*-*) 656 noconfigdirs="$noconfigdirs target-libstdc++-v3 target-mudflap ${libgcj}" 657 ;; 658 d10v-*-*) 659 noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}" 660 ;; 661 d30v-*-*) 662 noconfigdirs="$noconfigdirs ${libgcj} gdb" 663 ;; 664 ep9312-*-elf | ep9312-*-coff) 665 libgloss_dir=arm 666 ;; 667 fr30-*-elf*) 668 noconfigdirs="$noconfigdirs ${libgcj} gdb" 669 ;; 670 frv-*-*) 671 noconfigdirs="$noconfigdirs ${libgcj}" 672 ;; 673 moxie-*-*) 674 noconfigdirs="$noconfigdirs ${libgcj}" 675 noconfigdirs="$noconfigdirs gprof" 676 ;; 677 h8300*-*-*) 678 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" 679 ;; 680 h8500-*-*) 681 noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}" 682 ;; 683 hppa1.1-*-osf* | hppa1.1-*-bsd* ) 684 ;; 685 hppa*64*-*-linux* | parisc*64*-*-linux*) 686 # In this case, it's because the hppa64-linux target is for 687 # the kernel only at this point and has no libc, and thus no 688 # headers, crt*.o, etc., all of which are needed by these. 689 noconfigdirs="$noconfigdirs target-zlib" 690 ;; 691 parisc*-*-linux* | hppa*-*-linux*) 692 ;; 693 hppa*-*-*elf* | \ 694 hppa*-*-lites* | \ 695 hppa*-*-openbsd* | \ 696 hppa*64*-*-*) 697 noconfigdirs="$noconfigdirs ${libgcj}" 698 ;; 699 hppa*-hp-hpux11*) 700 noconfigdirs="$noconfigdirs ld shellutils" 701 ;; 702 hppa*-*-pro*) 703 libgloss_dir=pa 704 ;; 705 hppa*-*-*) 706 # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't 707 # build on HP-UX 10.20. 708 noconfigdirs="$noconfigdirs ld shellutils ${libgcj}" 709 ;; 710 i960-*-*) 711 noconfigdirs="$noconfigdirs ${libgcj} gdb" 712 ;; 713 ia64*-*-elf*) 714 # No gdb support yet. 715 noconfigdirs="$noconfigdirs readline mmalloc libgui itcl gdb" 716 ;; 717 ia64*-**-hpux*) 718 # No gdb or ld support yet. 719 noconfigdirs="$noconfigdirs ${libgcj} readline mmalloc libgui itcl gdb ld" 720 ;; 721 ia64*-*-*vms*) 722 # No gdb or ld support yet. 723 noconfigdirs="$noconfigdirs ${libgcj} tix readline mmalloc libgui itcl gdb ld" 724 ;; 725 i370-*-opened*) 726 ;; 727 i[[3456789]]86-*-coff | i[[3456789]]86-*-elf) 728 noconfigdirs="$noconfigdirs ${libgcj}" 729 libgloss_dir=i386 730 ;; 731 i[[3456789]]86-*-linux*) 732 # The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's 733 # not build java stuff by default. 734 case "${target}" in 735 *-*-*libc1*) 736 noconfigdirs="$noconfigdirs ${libgcj}";; 737 esac 738 739 # This section makes it possible to build newlib natively on linux. 740 # If we are using a cross compiler then don't configure newlib. 741 if test x${is_cross_compiler} != xno ; then 742 noconfigdirs="$noconfigdirs target-newlib" 743 fi 744 noconfigdirs="$noconfigdirs target-libgloss" 745 # If we are not using a cross compiler, do configure newlib. 746 # Note however, that newlib will only be configured in this situation 747 # if the --with-newlib option has been given, because otherwise 748 # 'target-newlib' will appear in skipdirs. 749 ;; 750 i[[3456789]]86-w64-mingw*) 751 noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}" 752 ;; 753 i[[3456789]]86-*-mingw*) 754 target_configdirs="$target_configdirs target-winsup" 755 noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}" 756 ;; 757 x86_64-*-mingw*) 758 noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}" 759 ;; 760 *-*-cygwin*) 761 target_configdirs="$target_configdirs target-libtermcap target-winsup" 762 noconfigdirs="$noconfigdirs target-gperf target-libgloss" 763 # always build newlib if winsup directory is present. 764 if test -d "$srcdir/winsup/cygwin"; then 765 skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` 766 elif test -d "$srcdir/newlib"; then 767 echo "Warning: winsup/cygwin is missing so newlib can't be built." 768 fi 769 ;; 770 i[[3456789]]86-moss-msdos | i[[3456789]]86-*-moss* | \ 771 i[[3456789]]86-*-uwin* | i[[3456789]]86-*-interix* ) 772 ;; 773 i[[3456789]]86-*-pe) 774 noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}" 775 ;; 776 i[[3456789]]86-*-sco3.2v5*) 777 # The linker does not yet know about weak symbols in COFF, 778 # and is not configured to handle mixed ELF and COFF. 779 noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}" 780 ;; 781 i[[3456789]]86-*-sco*) 782 noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}" 783 ;; 784 i[[3456789]]86-*-solaris2*) 785 noconfigdirs="$noconfigdirs target-libgloss" 786 ;; 787 i[[3456789]]86-*-sysv4*) 788 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" 789 ;; 790 i[[3456789]]86-*-beos*) 791 noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}" 792 ;; 793 i[[3456789]]86-*-rdos*) 794 noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss" 795 ;; 796 m32r-*-*) 797 noconfigdirs="$noconfigdirs ${libgcj}" 798 ;; 799 m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*) 800 noconfigdirs="$noconfigdirs target-libstdc++-v3 ${libgcj}" 801 libgloss_dir=m68hc11 802 ;; 803 m68k-*-elf*) 804 noconfigdirs="$noconfigdirs ${libgcj}" 805 ;; 806 m68k-*-coff*) 807 noconfigdirs="$noconfigdirs ${libgcj}" 808 ;; 809 m68*-*-* | fido-*-*) 810 libgloss_dir=m68k 811 ;; 812 mcore-*-pe*) 813 # The EPOC C++ environment does not support exceptions or rtti, 814 # and so building libstdc++-v3 tends not to always work. 815 noconfigdirs="$noconfigdirs target-libstdc++-v3" 816 ;; 817 mmix-*-*) 818 noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb libgloss" 819 unsupported_languages="$unsupported_languages fortran java" 820 ;; 821 mn10200-*-*) 822 noconfigdirs="$noconfigdirs ${libgcj}" 823 ;; 824 mn10300-*-*) 825 noconfigdirs="$noconfigdirs ${libgcj}" 826 ;; 827 mt-*-*) 828 noconfigdirs="$noconfigdirs sim" 829 ;; 830 powerpc-*-aix*) 831 # copied from rs6000-*-* entry 832 noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-newlib ${libgcj}" 833 ;; 834 powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe) 835 target_configdirs="$target_configdirs target-winsup" 836 noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl gnuserv ${libgcj}" 837 # always build newlib. 838 skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` 839 ;; 840 # This is temporary until we can link against shared libraries 841 powerpcle-*-solaris*) 842 noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl gnuserv ${libgcj}" 843 libgloss_dir=rs6000 844 ;; 845 powerpc-*-beos*) 846 noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}" 847 ;; 848 powerpc-*-eabi) 849 noconfigdirs="$noconfigdirs ${libgcj}" 850 libgloss_dir=rs6000 851 ;; 852 powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems* ) 853 libgloss_dir=rs6000 854 ;; 855 rs6000-*-lynxos*) 856 noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}" 857 ;; 858 rs6000-*-aix*) 859 noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-newlib ${libgcj}" 860 ;; 861 rs6000-*-*) 862 noconfigdirs="$noconfigdirs gprof ${libgcj}" 863 ;; 864 m68k-apollo-*) 865 noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}" 866 ;; 867 microblaze*) 868 noconfigdirs="$noconfigdirs gprof ${libgcj}" 869 ;; 870 mips*-sde-elf*) 871 noconfigdirs="$noconfigdirs ${libgcj}" 872 if test x$with_newlib = xyes; then 873 noconfigdirs="$noconfigdirs gprof" 874 fi 875 libgloss_dir=mips 876 ;; 877 mips*-*-irix5*) 878 noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}" 879 ;; 880 mips*-*-irix6*) 881 # Linking libjava exceeds command-line length limits on at least 882 # IRIX 6.2, but not on IRIX 6.5. 883 # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham 884 # <oldham@codesourcery.com> 885 noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}" 886 ;; 887 mips*-*-bsd*) 888 noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}" 889 ;; 890 mips*-*-linux*) 891 noconfigdirs="$noconfigdirs target-newlib target-libgloss" 892 ;; 893 mips*-*-*) 894 noconfigdirs="$noconfigdirs gprof ${libgcj}" 895 libgloss_dir=mips 896 ;; 897 romp-*-*) 898 noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}" 899 ;; 900 sh-*-* | sh64-*-*) 901 case "${host}" in 902 i[[3456789]]86-*-vsta) ;; # don't add gprof back in 903 i[[3456789]]86-*-go32*) ;; # don't add gprof back in 904 i[[3456789]]86-*-msdosdjgpp*) ;; # don't add gprof back in 905 *) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;; 906 esac 907 case "${target}" in 908 sh*-*-elf) 909 noconfigdirs="$noconfigdirs ${libgcj}" ;; 910 *) 911 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" ;; 912 esac 913 ;; 914 sparclet-*-aout* | sparc86x-*-*) 915 libgloss_dir=sparc 916 ;; 917 sparc-*-elf*) 918 noconfigdirs="$noconfigdirs ${libgcj}" 919 ;; 920 sparc64-*-elf*) 921 noconfigdirs="$noconfigdirs ${libgcj}" 922 libgloss_dir=sparc 923 ;; 924 sparclite-*-*) 925 noconfigdirs="$noconfigdirs ${libgcj}" 926 libgloss_dir=sparc 927 ;; 928 sparc-*-sunos4*) 929 noconfigdirs="$noconfigdirs ${libgcj}" 930 if test x${is_cross_compiler} != xno ; then 931 noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss" 932 else 933 use_gnu_ld=no 934 fi 935 ;; 936 sparc-*-solaris2.[[0-6]] | sparc-*-solaris2.[[0-6]].*) 937 noconfigdirs="$noconfigdirs ${libgcj}" 938 ;; 939 sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*) 940 ;; 941 tic6x-*-*) 942 noconfigdirs="$noconfigdirs gdb sim ${libgcj}" 943 ;; 944 v810-*-*) 945 noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}" 946 ;; 947 v850-*-*) 948 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" 949 ;; 950 v850e-*-*) 951 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" 952 ;; 953 v850ea-*-*) 954 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" 955 ;; 956 vax-*-vms) 957 noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss ${libgcj}" 958 ;; 959 vax-*-*) 960 noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}" 961 ;; 962 xtensa*-*-*) 963 noconfigdirs="$noconfigdirs ${libgcj}" 964 ;; 965 ip2k-*-*) 966 noconfigdirs="$noconfigdirs target-libstdc++-v3 ${libgcj}" 967 ;; 968 *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu) 969 noconfigdirs="$noconfigdirs target-newlib target-libgloss" 970 ;; 971 *-*-lynxos*) 972 noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}" 973 ;; 974 *-*-*) 975 noconfigdirs="$noconfigdirs ${libgcj}" 976 ;; 977esac 978 979# If we aren't building newlib, then don't build libgloss, since libgloss 980# depends upon some newlib header files. 981case "${noconfigdirs}" in 982 *target-libgloss*) ;; 983 *target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;; 984esac 985 986# Work in distributions that contain no compiler tools, like Autoconf. 987tentative_cc="" 988host_makefile_frag=/dev/null 989if test -d ${srcdir}/config ; then 990case "${host}" in 991 m68k-hp-hpux*) 992 # Avoid "too much defining" errors from HPUX compiler. 993 tentative_cc="cc -Wp,-H256000" 994 # If "ar" in $PATH is GNU ar, the symbol table may need rebuilding. 995 # If it's HP/UX ar, this should be harmless. 996 RANLIB="ar ts" 997 ;; 998 m68k-apollo-sysv*) 999 tentative_cc="cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DUSG" 1000 ;; 1001 m68k-apollo-bsd*) 1002 #None of the Apollo compilers can compile gas or binutils. The preprocessor 1003 # chokes on bfd, the compiler won't let you assign integers to enums, and 1004 # other problems. Defining CC to gcc is a questionable way to say "don't use 1005 # the apollo compiler" (the preferred version of GCC could be called cc, 1006 # or whatever), but I'm not sure leaving CC as cc is any better... 1007 #CC=cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_STDARG 1008 # Used to have BISON=yacc. 1009 tentative_cc=gcc 1010 ;; 1011 m88k-dg-dgux*) 1012 tentative_cc="gcc -Wall -ansi -D__using_DGUX" 1013 ;; 1014 m88k-harris-cxux*) 1015 # Under CX/UX, we want to tell the compiler to use ANSI mode. 1016 tentative_cc="cc -Xa" 1017 host_makefile_frag="config/mh-cxux" 1018 ;; 1019 m88k-motorola-sysv*) 1020 ;; 1021 mips*-dec-ultrix*) 1022 tentative_cc="cc -Wf,-XNg1000" 1023 host_makefile_frag="config/mh-decstation" 1024 ;; 1025 mips*-nec-sysv4*) 1026 # The C compiler on NEC MIPS SVR4 needs bigger tables. 1027 tentative_cc="cc -ZXNd=5000 -ZXNg=1000" 1028 host_makefile_frag="config/mh-necv4" 1029 ;; 1030 mips*-sgi-irix4*) 1031 # Tell compiler to use K&R C. We can't compile under the SGI Ansi 1032 # environment. Also bump switch table size so that cp-parse will 1033 # compile. Bump string length limit so linker builds. 1034 tentative_cc="cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000 -Wf,-XNl8192" 1035 ;; 1036 mips*-*-sysv4*) 1037 host_makefile_frag="config/mh-sysv4" 1038 ;; 1039 mips*-*-sysv*) 1040 # This is for a MIPS running RISC/os 4.52C. 1041 1042 # This is needed for GDB, but needs to be in the top-level make because 1043 # if a library is compiled with the bsd headers and gets linked with the 1044 # sysv system libraries all hell can break loose (e.g. a jmp_buf might be 1045 # a different size). 1046 # ptrace(2) apparently has problems in the BSD environment. No workaround is 1047 # known except to select the sysv environment. Could we use /proc instead? 1048 # These "sysv environments" and "bsd environments" often end up being a pain. 1049 # 1050 # This is not part of CFLAGS because perhaps not all C compilers have this 1051 # option. 1052 tentative_cc="cc -systype sysv" 1053 ;; 1054 i370-ibm-opened*) 1055 tentative_cc="c89" 1056 ;; 1057 i[[3456789]]86-*-sysv5*) 1058 host_makefile_frag="config/mh-sysv5" 1059 ;; 1060 i[[3456789]]86-*-dgux*) 1061 tentative_cc="gcc -Wall -ansi -D__using_DGUX" 1062 host_makefile_frag="config/mh-dgux386" 1063 ;; 1064 i[[3456789]]86-ncr-sysv4.3*) 1065 # The MetaWare compiler will generate a copyright message unless you 1066 # turn it off by adding the -Hnocopyr flag. 1067 tentative_cc="cc -Hnocopyr" 1068 ;; 1069 i[[3456789]]86-ncr-sysv4*) 1070 # for an NCR 3000 (i486/SVR4) system. 1071 # The NCR 3000 ships with a MetaWare compiler installed as /bin/cc. 1072 # This compiler not only emits obnoxious copyright messages every time 1073 # you run it, but it chokes and dies on a whole bunch of GNU source 1074 # files. Default to using the AT&T compiler installed in /usr/ccs/ATT/cc. 1075 tentative_cc="/usr/ccs/ATT/cc" 1076 host_makefile_frag="config/mh-ncr3000" 1077 ;; 1078 i[[3456789]]86-*-sco3.2v5*) 1079 ;; 1080 i[[3456789]]86-*-sco*) 1081 # The native C compiler botches some simple uses of const. Unfortunately, 1082 # it doesn't defined anything like "__sco__" for us to test for in ansidecl.h. 1083 tentative_cc="cc -Dconst=" 1084 host_makefile_frag="config/mh-sco" 1085 ;; 1086 i[[3456789]]86-*-udk*) 1087 host_makefile_frag="config/mh-sysv5" 1088 ;; 1089 i[[3456789]]86-*-solaris2*) 1090 host_makefile_frag="config/mh-sysv4" 1091 ;; 1092 i[[3456789]]86-*-msdosdjgpp*) 1093 host_makefile_frag="config/mh-djgpp" 1094 ;; 1095 *-cygwin*) 1096 ACX_CHECK_CYGWIN_CAT_WORKS 1097 host_makefile_frag="config/mh-cygwin" 1098 ;; 1099 *-mingw*) 1100 host_makefile_frag="config/mh-mingw" 1101 ;; 1102 *-interix*) 1103 host_makefile_frag="config/mh-interix" 1104 ;; 1105 vax-*-ultrix2*) 1106 # The old BSD pcc isn't up to compiling parts of gdb so use gcc 1107 tentative_cc=gcc 1108 ;; 1109 *-*-solaris2*) 1110 host_makefile_frag="config/mh-solaris" 1111 ;; 1112 m68k-sun-sunos*) 1113 # Sun's C compiler needs the -J flag to be able to compile cp-parse.c 1114 # without overflowing the jump tables (-J says to use a 32 bit table) 1115 tentative_cc="cc -J" 1116 ;; 1117 hppa*-hp-hpux10*) 1118 tentative_cc="cc -Wp,-H256000" 1119 host_makefile_frag="config/mh-pa-hpux10" 1120 ;; 1121 hppa*-hp-hpux* | hppa*-*-hiux*) 1122 tentative_cc="cc -Wp,-H256000" 1123 host_makefile_frag="config/mh-pa" 1124 ;; 1125 hppa*-*) 1126 host_makefile_frag="config/mh-pa" 1127 ;; 1128 *-hp-hpux* | *-*-hiux*) 1129 tentative_cc="cc -Wp,-H256000" 1130 ;; 1131 rs6000-*-lynxos*) 1132 # /bin/cc is less than useful for our purposes. Always use GCC 1133 tentative_cc="/usr/cygnus/progressive/bin/gcc" 1134 host_makefile_frag="config/mh-lynxrs6k" 1135 ;; 1136 i[[3456789]]86-*-darwin* | x86_64-*-darwin*) 1137 host_makefile_frag="config/mh-x86-darwin" 1138 ;; 1139 powerpc-*-darwin*) 1140 host_makefile_frag="config/mh-ppc-darwin" 1141 ;; 1142 powerpc-*-aix*) 1143 host_makefile_frag="config/mh-ppc-aix" 1144 ;; 1145 rs6000-*-aix*) 1146 host_makefile_frag="config/mh-ppc-aix" 1147 ;; 1148 *-*-lynxos*) 1149 # /bin/cc is less than useful for our purposes. Always use GCC 1150 tentative_cc="/bin/gcc" 1151 ;; 1152 *-*-sysv4*) 1153 host_makefile_frag="config/mh-sysv4" 1154 ;; 1155 # This is placed last to prevent interfering with the cases above. 1156 i[[3456789]]86-*-*) 1157 # Build the stage2 and stage3 compilers with -fomit-frame-pointer. 1158 host_makefile_frag="config/mh-x86omitfp" 1159 ;; 1160esac 1161fi 1162 1163# If we aren't going to be using gcc, see if we can extract a definition 1164# of CC from the fragment. 1165# Actually, use the 'pre-extracted' version above. 1166if test -z "${CC}" && test "${build}" = "${host}" ; then 1167 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" 1168 found= 1169 for dir in $PATH; do 1170 test -z "$dir" && dir=. 1171 if test -f $dir/gcc; then 1172 found=yes 1173 break 1174 fi 1175 done 1176 IFS="$save_ifs" 1177 if test -z "${found}" && test -n "${tentative_cc}" ; then 1178 CC=$tentative_cc 1179 fi 1180fi 1181 1182if test "${build}" != "${host}" ; then 1183 AR_FOR_BUILD=${AR_FOR_BUILD-ar} 1184 AS_FOR_BUILD=${AS_FOR_BUILD-as} 1185 CC_FOR_BUILD=${CC_FOR_BUILD-gcc} 1186 CXX_FOR_BUILD=${CXX_FOR_BUILD-g++} 1187 GCJ_FOR_BUILD=${GCJ_FOR_BUILD-gcj} 1188 GFORTRAN_FOR_BUILD=${GFORTRAN_FOR_BUILD-gfortran} 1189 DLLTOOL_FOR_BUILD=${DLLTOOL_FOR_BUILD-dlltool} 1190 LD_FOR_BUILD=${LD_FOR_BUILD-ld} 1191 NM_FOR_BUILD=${NM_FOR_BUILD-nm} 1192 RANLIB_FOR_BUILD=${RANLIB_FOR_BUILD-ranlib} 1193 WINDRES_FOR_BUILD=${WINDRES_FOR_BUILD-windres} 1194 WINDMC_FOR_BUILD=${WINDMC_FOR_BUILD-windmc} 1195else 1196 AR_FOR_BUILD="\$(AR)" 1197 AS_FOR_BUILD="\$(AS)" 1198 CC_FOR_BUILD="\$(CC)" 1199 CXX_FOR_BUILD="\$(CXX)" 1200 GCJ_FOR_BUILD="\$(GCJ)" 1201 GFORTRAN_FOR_BUILD="\$(GFORTRAN)" 1202 DLLTOOL_FOR_BUILD="\$(DLLTOOL)" 1203 LD_FOR_BUILD="\$(LD)" 1204 NM_FOR_BUILD="\$(NM)" 1205 RANLIB_FOR_BUILD="\$(RANLIB)" 1206 WINDRES_FOR_BUILD="\$(WINDRES)" 1207 WINDMC_FOR_BUILD="\$(WINDMC)" 1208fi 1209 1210AC_PROG_CC 1211AC_PROG_CXX 1212 1213# We must set the default linker to the linker used by gcc for the correct 1214# operation of libtool. If LD is not defined and we are using gcc, try to 1215# set the LD default to the ld used by gcc. 1216if test -z "$LD"; then 1217 if test "$GCC" = yes; then 1218 case $build in 1219 *-*-mingw*) 1220 gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;; 1221 *) 1222 gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;; 1223 esac 1224 case $gcc_prog_ld in 1225 # Accept absolute paths. 1226 [[\\/]* | [A-Za-z]:[\\/]*)] 1227 LD="$gcc_prog_ld" ;; 1228 esac 1229 fi 1230fi 1231 1232ACX_PROG_GNAT 1233ACX_PROG_CMP_IGNORE_INITIAL 1234 1235# See if we are building gcc with C++. 1236AC_ARG_ENABLE(build-with-cxx, 1237[ --enable-build-with-cxx build with C++ compiler instead of C compiler], 1238ENABLE_BUILD_WITH_CXX=$enableval, 1239ENABLE_BUILD_WITH_CXX=no) 1240 1241# Used for setting $lt_cv_objdir 1242_LT_CHECK_OBJDIR 1243 1244# Check for GMP, MPFR and MPC 1245gmplibs="-lmpc -lmpfr -lgmp" 1246gmpinc= 1247have_gmp=no 1248 1249# Specify a location for mpc 1250# check for this first so it ends up on the link line before mpfr. 1251AC_ARG_WITH(mpc, [ --with-mpc=PATH specify prefix directory for installed MPC package. 1252 Equivalent to --with-mpc-include=PATH/include 1253 plus --with-mpc-lib=PATH/lib]) 1254AC_ARG_WITH(mpc_include, [ --with-mpc-include=PATH 1255 specify directory for installed MPC include files]) 1256AC_ARG_WITH(mpc_lib, [ --with-mpc-lib=PATH specify directory for the installed MPC library]) 1257 1258if test "x$with_mpc" != x; then 1259 gmplibs="-L$with_mpc/lib $gmplibs" 1260 gmpinc="-I$with_mpc/include $gmpinc" 1261fi 1262if test "x$with_mpc_include" != x; then 1263 gmpinc="-I$with_mpc_include $gmpinc" 1264fi 1265if test "x$with_mpc_lib" != x; then 1266 gmplibs="-L$with_mpc_lib $gmplibs" 1267fi 1268if test "x$with_mpc$with_mpc_include$with_mpc_lib" = x && test -d ${srcdir}/mpc; then 1269 gmplibs='-L$$r/$(HOST_SUBDIR)/mpc/src/'"$lt_cv_objdir $gmplibs" 1270 gmpinc='-I$$s/mpc/src '"$gmpinc" 1271 # Do not test the mpc version. Assume that it is sufficient, since 1272 # it is in the source tree, and the library has not been built yet 1273 # but it would be included on the link line in the version check below 1274 # hence making the test fail. 1275 have_gmp=yes 1276fi 1277 1278# Specify a location for mpfr 1279# check for this first so it ends up on the link line before gmp. 1280AC_ARG_WITH(mpfr-dir, [ --with-mpfr-dir=PATH this option has been REMOVED], 1281 AC_MSG_ERROR([The --with-mpfr-dir=PATH option has been removed. 1282Use --with-mpfr=PATH or --with-mpfr-include=PATH plus --with-mpfr-lib=PATH])) 1283 1284AC_ARG_WITH(mpfr, [ --with-mpfr=PATH specify prefix directory for installed MPFR package. 1285 Equivalent to --with-mpfr-include=PATH/include 1286 plus --with-mpfr-lib=PATH/lib]) 1287AC_ARG_WITH(mpfr_include, [ --with-mpfr-include=PATH 1288 specify directory for installed MPFR include files]) 1289AC_ARG_WITH(mpfr_lib, [ --with-mpfr-lib=PATH specify directory for the installed MPFR library]) 1290 1291if test "x$with_mpfr" != x; then 1292 gmplibs="-L$with_mpfr/lib $gmplibs" 1293 gmpinc="-I$with_mpfr/include $gmpinc" 1294fi 1295if test "x$with_mpfr_include" != x; then 1296 gmpinc="-I$with_mpfr_include $gmpinc" 1297fi 1298if test "x$with_mpfr_lib" != x; then 1299 gmplibs="-L$with_mpfr_lib $gmplibs" 1300fi 1301if test "x$with_mpfr$with_mpfr_include$with_mpfr_lib" = x && test -d ${srcdir}/mpfr; then 1302 gmplibs='-L$$r/$(HOST_SUBDIR)/mpfr/'"$lt_cv_objdir $gmplibs" 1303 gmpinc='-I$$r/$(HOST_SUBDIR)/mpfr -I$$s/mpfr '"$gmpinc" 1304 extra_mpc_mpfr_configure_flags='--with-mpfr-include=$$s/mpfr --with-mpfr-lib=$$r/$(HOST_SUBDIR)/mpfr/'"$lt_cv_objdir" 1305 # Do not test the mpfr version. Assume that it is sufficient, since 1306 # it is in the source tree, and the library has not been built yet 1307 # but it would be included on the link line in the version check below 1308 # hence making the test fail. 1309 have_gmp=yes 1310fi 1311 1312# Specify a location for gmp 1313AC_ARG_WITH(gmp-dir, [ --with-gmp-dir=PATH this option has been REMOVED], 1314 AC_MSG_ERROR([The --with-gmp-dir=PATH option has been removed. 1315Use --with-gmp=PATH or --with-gmp-include=PATH plus --with-gmp-lib=PATH])) 1316 1317AC_ARG_WITH(gmp, [ --with-gmp=PATH specify prefix directory for the installed GMP package. 1318 Equivalent to --with-gmp-include=PATH/include 1319 plus --with-gmp-lib=PATH/lib]) 1320AC_ARG_WITH(gmp_include, [ --with-gmp-include=PATH specify directory for installed GMP include files]) 1321AC_ARG_WITH(gmp_lib, [ --with-gmp-lib=PATH specify directory for the installed GMP library]) 1322 1323 1324if test "x$with_gmp" != x; then 1325 gmplibs="-L$with_gmp/lib $gmplibs" 1326 gmpinc="-I$with_gmp/include $gmpinc" 1327fi 1328if test "x$with_gmp_include" != x; then 1329 gmpinc="-I$with_gmp_include $gmpinc" 1330fi 1331if test "x$with_gmp_lib" != x; then 1332 gmplibs="-L$with_gmp_lib $gmplibs" 1333fi 1334if test "x$with_gmp$with_gmp_include$with_gmp_lib" = x && test -d ${srcdir}/gmp; then 1335 gmplibs='-L$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir $gmplibs" 1336 gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp '"$gmpinc" 1337 extra_mpfr_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir" 1338 extra_mpc_gmp_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir" 1339 # Do not test the gmp version. Assume that it is sufficient, since 1340 # it is in the source tree, and the library has not been built yet 1341 # but it would be included on the link line in the version check below 1342 # hence making the test fail. 1343 have_gmp=yes 1344fi 1345 1346if test -d ${srcdir}/gcc && test "x$have_gmp" = xno; then 1347 have_gmp=yes 1348 saved_CFLAGS="$CFLAGS" 1349 CFLAGS="$CFLAGS $gmpinc" 1350 # Check for the recommended and required versions of GMP. 1351 AC_MSG_CHECKING([for the correct version of gmp.h]) 1352 AC_TRY_COMPILE([#include "gmp.h"],[ 1353 #define GCC_GMP_VERSION_NUM(a,b,c) (((a) << 16L) | ((b) << 8) | (c)) 1354 #define GCC_GMP_VERSION GCC_GMP_VERSION_NUM(__GNU_MP_VERSION,__GNU_MP_VERSION_MINOR,__GNU_MP_VERSION_PATCHLEVEL) 1355 #if GCC_GMP_VERSION < GCC_GMP_VERSION_NUM(4,2,0) 1356 choke me 1357 #endif 1358 ], [AC_TRY_COMPILE([#include <gmp.h>],[ 1359 #define GCC_GMP_VERSION_NUM(a,b,c) (((a) << 16L) | ((b) << 8) | (c)) 1360 #define GCC_GMP_VERSION GCC_GMP_VERSION_NUM(__GNU_MP_VERSION,__GNU_MP_VERSION_MINOR,__GNU_MP_VERSION_PATCHLEVEL) 1361 #if GCC_GMP_VERSION < GCC_GMP_VERSION_NUM(4,3,2) 1362 choke me 1363 #endif 1364 ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([buggy but acceptable])])], 1365 [AC_MSG_RESULT([no]); have_gmp=no]) 1366 1367 # If we have GMP, check the MPFR version. 1368 if test x"$have_gmp" = xyes; then 1369 # Check for the recommended and required versions of MPFR. 1370 AC_MSG_CHECKING([for the correct version of mpfr.h]) 1371 AC_TRY_COMPILE([#include <gmp.h> 1372 #include <mpfr.h>],[ 1373 #if MPFR_VERSION < MPFR_VERSION_NUM(2,3,1) 1374 choke me 1375 #endif 1376 ], [AC_TRY_COMPILE([#include <gmp.h> 1377 #include <mpfr.h>],[ 1378 #if MPFR_VERSION < MPFR_VERSION_NUM(2,4,2) 1379 choke me 1380 #endif 1381 ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([buggy but acceptable])])], 1382 [AC_MSG_RESULT([no]); have_gmp=no]) 1383 fi 1384 1385 # Check for the MPC header version. 1386 if test x"$have_gmp" = xyes ; then 1387 # Check for the recommended and required versions of MPC. 1388 AC_MSG_CHECKING([for the correct version of mpc.h]) 1389 AC_TRY_COMPILE([#include <mpc.h>],[ 1390 #if MPC_VERSION < MPC_VERSION_NUM(0,8,0) 1391 choke me 1392 #endif 1393 ], [AC_TRY_COMPILE([#include <mpc.h>],[ 1394 #if MPC_VERSION < MPC_VERSION_NUM(0,8,1) 1395 choke me 1396 #endif 1397 ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([buggy but acceptable])])], 1398 [AC_MSG_RESULT([no]); have_gmp=no]) 1399 fi 1400 1401 # Now check the MPFR library. 1402 if test x"$have_gmp" = xyes; then 1403 saved_LIBS="$LIBS" 1404 LIBS="$LIBS $gmplibs" 1405 AC_MSG_CHECKING([for the correct version of the gmp/mpfr/mpc libraries]) 1406 AC_TRY_LINK([#include <mpc.h>],[ 1407 mpfr_t n; 1408 mpfr_t x; 1409 mpc_t c; 1410 int t; 1411 mpfr_init (n); 1412 mpfr_init (x); 1413 mpfr_atan2 (n, n, x, GMP_RNDN); 1414 mpfr_erfc (n, x, GMP_RNDN); 1415 mpfr_subnormalize (x, t, GMP_RNDN); 1416 mpfr_clear(n); 1417 mpfr_clear(x); 1418 mpc_init2 (c, 53); 1419 mpc_set_ui_ui (c, 1, 1, MPC_RNDNN); 1420 mpc_cosh (c, c, MPC_RNDNN); 1421 mpc_pow (c, c, c, MPC_RNDNN); 1422 mpc_acosh (c, c, MPC_RNDNN); 1423 mpc_clear (c); 1424 ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); have_gmp=no]) 1425 LIBS="$saved_LIBS" 1426 fi 1427 1428 CFLAGS="$saved_CFLAGS" 1429 1430# The library versions listed in the error message below should match 1431# the HARD-minimums enforced above. 1432 if test x$have_gmp != xyes; then 1433 AC_MSG_ERROR([Building GCC requires GMP 4.2+, MPFR 2.3.1+ and MPC 0.8.0+. 1434Try the --with-gmp, --with-mpfr and/or --with-mpc options to specify 1435their locations. Source code for these libraries can be found at 1436their respective hosting sites as well as at 1437ftp://gcc.gnu.org/pub/gcc/infrastructure/. See also 1438http://gcc.gnu.org/install/prerequisites.html for additional info. If 1439you obtained GMP, MPFR and/or MPC from a vendor distribution package, 1440make sure that you have installed both the libraries and the header 1441files. They may be located in separate packages.]) 1442 fi 1443fi 1444 1445# Flags needed for both GMP, MPFR and/or MPC. 1446AC_SUBST(gmplibs) 1447AC_SUBST(gmpinc) 1448AC_SUBST(extra_mpfr_configure_flags) 1449AC_SUBST(extra_mpc_gmp_configure_flags) 1450AC_SUBST(extra_mpc_mpfr_configure_flags) 1451 1452# Allow host libstdc++ to be specified for static linking with PPL. 1453AC_ARG_WITH(host-libstdcxx, [ --with-host-libstdcxx=L Use linker arguments L to link with libstdc++ 1454 when linking with PPL]) 1455 1456case $with_host_libstdcxx in 1457 no|yes) 1458 AC_MSG_ERROR([-with-host-libstdcxx needs an argument]) 1459 ;; 1460esac 1461 1462# Linker flags to use for stage1 or when not boostrapping. 1463AC_ARG_WITH(stage1-ldflags, 1464[ --with-stage1-ldflags=FLAGS Linker flags for stage1], 1465[if test "$withval" = "no" -o "$withval" = "yes"; then 1466 stage1_ldflags= 1467 else 1468 stage1_ldflags=$withval 1469 fi], 1470[stage1_ldflags=]) 1471AC_SUBST(stage1_ldflags) 1472 1473# Libraries to use for stage1 or when not bootstrapping. 1474AC_ARG_WITH(stage1-libs, 1475[ -with-stage1-libs=LIBS Libraries for stage1], 1476[if test "$withval" = "no" -o "$withval" = "yes"; then 1477 stage1_libs= 1478 else 1479 stage1_libs=$withval 1480 fi], 1481[stage1_libs=$with_host_libstdcxx]) 1482AC_SUBST(stage1_libs) 1483 1484# Libraries to use for stage2 and later builds. This defaults to the 1485# argument passed to --with-host-libstdcxx. 1486AC_ARG_WITH(boot-libs, 1487[ --with-boot-libs=LIBS Libraries for stage2 and later], 1488[if test "$withval" = "no" -o "$withval" = "yes"; then 1489 poststage1_libs= 1490 else 1491 poststage1_libs=$withval 1492 fi], 1493[poststage1_libs=$with_host_libstdcxx]) 1494AC_SUBST(poststage1_libs) 1495 1496# Linker flags to use for stage2 and later builds. 1497AC_ARG_WITH(boot-ldflags, 1498[ --with-boot-ldflags=FLAGS Linker flags for stage2 and later], 1499[if test "$withval" = "no" -o "$withval" = "yes"; then 1500 poststage1_ldflags= 1501 else 1502 poststage1_ldflags=$withval 1503 fi], 1504[poststage1_ldflags= 1505 # With --enable-build-with-cxx, default to linking libstdc++ and 1506 # libgcc statically. But if the user explicitly specified the 1507 # libraries to use, trust that they are doing what they want. 1508 if test "$ENABLE_BUILD_WITH_CXX" = "yes" -a "$poststage1_libs" = ""; then 1509 poststage1_ldflags="-static-libstdc++ -static-libgcc" 1510 fi]) 1511AC_SUBST(poststage1_ldflags) 1512 1513# Check for PPL 1514ppllibs=" -lppl_c -lppl -lgmpxx" 1515pplinc= 1516 1517AC_ARG_WITH(ppl, [ --with-ppl=PATH Specify prefix directory for the installed PPL package 1518 Equivalent to --with-ppl-include=PATH/include 1519 plus --with-ppl-lib=PATH/lib]) 1520AC_ARG_WITH(ppl_include, [ --with-ppl-include=PATH Specify directory for installed PPL include files]) 1521AC_ARG_WITH(ppl_lib, [ --with-ppl-lib=PATH Specify the directory for the installed PPL library]) 1522 1523case $with_ppl in 1524 no) 1525 ppllibs= 1526 ;; 1527 "" | yes) 1528 ;; 1529 *) 1530 ppllibs="-L$with_ppl/lib -lppl_c -lppl -lgmpxx" 1531 pplinc="-I$with_ppl/include $pplinc" 1532 ;; 1533esac 1534if test "x$with_ppl_include" != x; then 1535 pplinc="-I$with_ppl_include $pplinc" 1536fi 1537if test "x$with_ppl_lib" != x; then 1538 ppllibs="-L$with_ppl_lib -lppl_c -lppl -lgmpxx" 1539fi 1540if test "x$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then 1541 ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/interfaces/C/'"$lt_cv_objdir"' -L$$r/$(HOST_SUBDIR)/ppl/src/'"$lt_cv_objdir"' -lppl_c -lppl -lgmpxx ' 1542 pplinc='-I$$r/$(HOST_SUBDIR)/ppl/src -I$$r/$(HOST_SUBDIR)/ppl/interfaces/C ' 1543 enable_ppl_version_check=no 1544fi 1545 1546AC_ARG_ENABLE(ppl-version-check, 1547[ --disable-ppl-version-check disable check for PPL version], 1548ENABLE_PPL_CHECK=$enableval, 1549ENABLE_PPL_CHECK=yes) 1550 1551if test "x$with_ppl" != "xno" -a "${ENABLE_PPL_CHECK}" = "yes"; then 1552 saved_CFLAGS="$CFLAGS" 1553 CFLAGS="$CFLAGS $pplinc $gmpinc" 1554 AC_MSG_CHECKING([for version 0.10 (or later revision) of PPL]) 1555 AC_TRY_COMPILE([#include "ppl_c.h"],[ 1556 #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 10 1557 choke me 1558 #endif 1559 ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); ppllibs= ; pplinc= ; with_ppl=no ]) 1560 CFLAGS="$saved_CFLAGS" 1561fi 1562 1563# Flags needed for PPL 1564AC_SUBST(ppllibs) 1565AC_SUBST(pplinc) 1566 1567 1568# Check for CLOOG 1569clooglibs=" -lcloog " 1570clooginc=" -DCLOOG_PPL_BACKEND " 1571 1572AC_ARG_WITH(cloog, [ --with-cloog=PATH Specify prefix directory for the installed CLooG-PPL package 1573 Equivalent to --with-cloog-include=PATH/include 1574 plus --with-cloog-lib=PATH/lib]) 1575AC_ARG_WITH(cloog_include, [ --with-cloog-include=PATH Specify directory for installed CLooG include files]) 1576AC_ARG_WITH(cloog_lib, [ --with-cloog-lib=PATH Specify the directory for the installed CLooG library]) 1577 1578if test "x$with_ppl" = "xno"; then 1579 with_cloog=no 1580fi 1581 1582case $with_cloog in 1583 no) 1584 clooglibs= 1585 clooginc= 1586 ;; 1587 "" | yes) 1588 ;; 1589 *) 1590 clooglibs="-L$with_cloog/lib -lcloog" 1591 clooginc="-I$with_cloog/include -DCLOOG_PPL_BACKEND " 1592 ;; 1593esac 1594if test "x$with_cloog_include" != x; then 1595 clooginc="-I$with_cloog_include -DCLOOG_PPL_BACKEND " 1596fi 1597if test "x$with_cloog_lib" != x; then 1598 clooglibs="-L$with_cloog_lib -lcloog" 1599fi 1600if test "x$with_cloog$with_cloog_include$with_cloog_lib" = x && test -d ${srcdir}/cloog; then 1601 clooglibs='-L$$r/$(HOST_SUBDIR)/cloog/'"$lt_cv_objdir"' -lcloog ' 1602 clooginc='-I$$r/$(HOST_SUBDIR)/cloog/include -I$$s/cloog/include -DCLOOG_PPL_BACKEND ' 1603 enable_cloog_version_check=no 1604fi 1605 1606AC_ARG_ENABLE(cloog-version-check, 1607[ --disable-cloog-version-check disable check for CLooG version], 1608ENABLE_CLOOG_CHECK=$enableval, 1609ENABLE_CLOOG_CHECK=yes) 1610 1611if test "x$with_cloog" != "xno" -a "${ENABLE_CLOOG_CHECK}" = "yes"; then 1612 saved_CFLAGS="$CFLAGS" 1613 CFLAGS="$CFLAGS $clooginc $gmpinc $pplinc" 1614 AC_MSG_CHECKING([for version 0.15.5 (or later revision) of CLooG]) 1615 AC_TRY_COMPILE([#include "cloog/cloog.h"],[ 1616 #if CLOOG_VERSION_MAJOR != 0 || CLOOG_VERSION_MINOR != 15 || CLOOG_VERSION_REVISION < 5 1617 choke me 1618 #endif 1619 ], [AC_TRY_COMPILE([#include "cloog/cloog.h"],[ 1620 #if CLOOG_VERSION_MAJOR != 0 || CLOOG_VERSION_MINOR != 15 || CLOOG_VERSION_REVISION < 9 1621 choke me 1622 #endif 1623 ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([buggy but acceptable])])], 1624 [AC_MSG_RESULT([no]); clooglibs= ; clooginc= ]) 1625 CFLAGS="$saved_CFLAGS" 1626fi 1627 1628# Flags needed for CLOOG 1629AC_SUBST(clooglibs) 1630AC_SUBST(clooginc) 1631 1632# Check for LTO support. 1633AC_ARG_ENABLE(lto, 1634[ --enable-lto enable link time optimization support], 1635enable_lto=$enableval, 1636enable_lto=yes; default_enable_lto=yes) 1637 1638 1639ACX_ELF_TARGET_IFELSE([if test x"$enable_lto" = x"yes" ; then 1640 # Make sure that libelf.h and gelf.h are available. 1641 AC_ARG_WITH(libelf, [ --with-libelf=PATH Specify prefix directory for the installed libelf package 1642 Equivalent to --with-libelf-include=PATH/include 1643 plus --with-libelf-lib=PATH/lib]) 1644 1645 AC_ARG_WITH(libelf_include, [ --with-libelf-include=PATH Specify directory for installed libelf include files]) 1646 1647 AC_ARG_WITH(libelf_lib, [ --with-libelf-lib=PATH Specify the directory for the installed libelf library]) 1648 1649 saved_CFLAGS="$CFLAGS" 1650 saved_CPPFLAGS="$CPPFLAGS" 1651 saved_LIBS="$LIBS" 1652 1653 case $with_libelf in 1654 "") 1655 libelflibs="-lelf" 1656 libelfinc="-I/usr/include/libelf" 1657 ;; 1658 *) 1659 libelflibs="-L$with_libelf/lib -lelf" 1660 libelfinc="-I$with_libelf/include -I$with_libelf/include/libelf" 1661 LIBS="$libelflibs $LIBS" 1662 ;; 1663 esac 1664 1665 if test "x$with_libelf_include" != x; then 1666 libelfinc="-I$with_libelf_include" 1667 fi 1668 1669 if test "x$with_libelf_lib" != x; then 1670 libelflibs="-L$with_libelf_lib -lelf" 1671 LIBS="$libelflibs $LIBS" 1672 fi 1673 1674 if test "x$with_libelf$with_libelf_include$with_libelf_lib" = x \ 1675 && test -d ${srcdir}/libelf; then 1676 libelflibs='-L$$r/$(HOST_SUBDIR)/libelf/lib -lelf ' 1677 libelfinc='-D__LIBELF_INTERNAL__ -I$$r/$(HOST_SUBDIR)/libelf/lib -I$$s/libelf/lib' 1678 LIBS="$libelflibs $LIBS" 1679 1680 else 1681 1682 CFLAGS="$CFLAGS $libelfinc" 1683 CPPFLAGS="$CPPFLAGS $libelfinc" 1684 LIBS="$LIBS $libelflibs" 1685 1686 AC_CHECK_HEADERS(libelf.h, [have_libelf_h=yes]) 1687 AC_CHECK_HEADERS(gelf.h, [have_gelf_h=yes]) 1688 1689 AC_CHECK_HEADERS(libelf/libelf.h, [have_libelf_libelf_h=yes]) 1690 AC_CHECK_HEADERS(libelf/gelf.h, [have_libelf_gelf_h=yes]) 1691 1692 # If we couldn't find libelf.h and the user forced it, emit an error. 1693 if test x"$have_libelf_h" != x"yes" \ 1694 && test x"$have_libelf_libelf_h" != x"yes" ; then 1695 if test x"$default_enable_lto" != x"yes" ; then 1696 AC_MSG_ERROR([LTO support requires libelf.h or libelf/libelf.h.]) 1697 else 1698 enable_lto=no 1699 libelflibs= 1700 libelfinc= 1701 fi 1702 fi 1703 1704 # If we couldn't find gelf.h and the user forced it, emit an error. 1705 if test x"$have_gelf_h" != x"yes" \ 1706 && test x"$have_libelf_gelf_h" != x"yes" ; then 1707 if test x"$default_enable_lto" != x"yes" ; then 1708 AC_MSG_ERROR([LTO support requires gelf.h or libelf/gelf.h.]) 1709 else 1710 enable_lto=no 1711 libelflibs= 1712 libelfinc= 1713 fi 1714 fi 1715 1716 # Check that the detected libelf has the functions we need. We cannot 1717 # rely on just detecting the headers since they do not include 1718 # versioning information. Add functions, if needed. 1719 if test x"$enable_lto" = x"yes" ; then 1720 AC_MSG_CHECKING([for the correct version of libelf]) 1721 AC_TRY_LINK( 1722 [#include <libelf.h>],[ 1723 elf_errmsg (0); 1724 elf_getscn (0, 0); 1725 elf_nextscn (0, 0); 1726 elf_strptr (0, 0, 0); 1727 elf_getident (0, 0); 1728 elf_begin (0, 0, 0); 1729 elf_ndxscn (0); 1730 elf_end (0); 1731 ], 1732 [AC_MSG_RESULT([yes]);], 1733 [AC_MSG_RESULT([no]); enable_lto=no; libelflibs= ; libelfinc= ] 1734 ) 1735 1736 # Check for elf_getshdrstrndx or elf_getshstrndx. The latter's flavor 1737 # is determined in gcc/configure.ac. 1738 if test x"$enable_lto" = x"yes" ; then 1739 AC_MSG_CHECKING([for elf_getshdrstrndx]) 1740 AC_TRY_LINK( 1741 [#include <libelf.h>],[ 1742 elf_getshdrstrndx (0, 0); 1743 ], 1744 [AC_MSG_RESULT([yes]);], 1745 [AC_MSG_RESULT([no]); 1746 AC_MSG_CHECKING([for elf_getshstrndx]) 1747 AC_TRY_LINK( 1748 [#include <libelf.h>],[ 1749 elf_getshstrndx (0, 0); 1750 ], 1751 [AC_MSG_RESULT([yes]);], 1752 [AC_MSG_RESULT([no]); enable_lto=no; libelflibs= ; libelfinc= ] 1753 )] 1754 ) 1755 fi 1756 1757 # If we couldn't enable LTO and the user forced it, emit an error. 1758 if test x"$enable_lto" = x"no" \ 1759 && test x"$default_enable_lto" != x"yes" ; then 1760 AC_MSG_ERROR([To enable LTO, GCC requires libelf v0.8.12+. 1761Try the --with-libelf, --with-libelf-include and --with-libelf-lib options 1762to specify its location.]) 1763 fi 1764 fi 1765 1766 CFLAGS="$saved_CFLAGS" 1767 CPPFLAGS="$saved_CPPFLAGS" 1768 LIBS="$saved_LIBS" 1769 1770 fi 1771 1772 # Flags needed for libelf. 1773 AC_SUBST(libelflibs) 1774 AC_SUBST(libelfinc) 1775fi],[if test x"$default_enable_lto" = x"yes" ; then 1776 # On non-ELF platforms, LTO must be explicitly enabled. 1777 enable_lto=no 1778 else 1779 # Apart from ELF platforms, only Windows supports LTO so far. It 1780 # would also be nice to check the binutils support, but we don't 1781 # have gcc_GAS_CHECK_FEATURE available here. For now, we'll just 1782 # warn during gcc/ subconfigure; unless you're bootstrapping with 1783 # -flto it won't be needed until after installation anyway. 1784 case $target in 1785 *-cygwin*|*-mingw*) ;; 1786 x86_64-apple-darwin*) ;; 1787 *) if test x"$enable_lto" = x"yes"; then 1788 AC_MSG_ERROR([LTO support is not enabled for this target.]) 1789 fi 1790 ;; 1791 esac 1792 fi 1793 default_enable_lto=no]) 1794 1795 1796# By default, C is the only stage 1 language. 1797stage1_languages=,c, 1798 1799# Target libraries that we bootstrap. 1800bootstrap_target_libs=,target-libgcc, 1801 1802# Figure out what language subdirectories are present. 1803# Look if the user specified --enable-languages="..."; if not, use 1804# the environment variable $LANGUAGES if defined. $LANGUAGES might 1805# go away some day. 1806# NB: embedded tabs in this IF block -- do not untabify 1807if test -d ${srcdir}/gcc; then 1808 if test x"${enable_languages+set}" != xset; then 1809 if test x"${LANGUAGES+set}" = xset; then 1810 enable_languages="${LANGUAGES}" 1811 echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2 1812 else 1813 enable_languages=all 1814 fi 1815 else 1816 if test x"${enable_languages}" = x || 1817 test x"${enable_languages}" = xyes; 1818 then 1819 echo configure.in: --enable-languages needs at least one language argument 1>&2 1820 exit 1 1821 fi 1822 fi 1823 enable_languages=`echo "${enable_languages}" | sed -e 's/[[ ,]][[ ,]]*/,/g' -e 's/,$//'` 1824 1825 # 'f95' is the old name for the 'fortran' language. We issue a warning 1826 # and make the substitution. 1827 case ,${enable_languages}, in 1828 *,f95,*) 1829 echo configure.in: warning: 'f95' as language name is deprecated, use 'fortran' instead 1>&2 1830 enable_languages=`echo "${enable_languages}" | sed -e 's/f95/fortran/g'` 1831 ;; 1832 esac 1833 1834 # First scan to see if an enabled language requires some other language. 1835 # We assume that a given config-lang.in will list all the language 1836 # front ends it requires, even if some are required indirectly. 1837 for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do 1838 case ${lang_frag} in 1839 ..) ;; 1840 # The odd quoting in the next line works around 1841 # an apparent bug in bash 1.12 on linux. 1842 ${srcdir}/gcc/[[*]]/config-lang.in) ;; 1843 *) 1844 # From the config-lang.in, get $language, $lang_requires 1845 language= 1846 lang_requires= 1847 . ${lang_frag} 1848 for other in ${lang_requires} ; do 1849 case ,${enable_languages}, in 1850 *,$other,*) ;; 1851 *,all,*) ;; 1852 *,$language,*) 1853 echo " \`$other' language required by \`$language'; enabling" 1>&2 1854 enable_languages="${enable_languages},${other}" 1855 ;; 1856 esac 1857 done 1858 ;; 1859 esac 1860 done 1861 1862 new_enable_languages=,c, 1863 1864 # If LTO is enabled, add the LTO front end. 1865 extra_host_libiberty_configure_flags= 1866 if test "$enable_lto" = "yes" ; then 1867 case ,${enable_languages}, in 1868 *,lto,*) ;; 1869 *) enable_languages="${enable_languages},lto" ;; 1870 esac 1871 if test "${ENABLE_GOLD}" = "yes" ; then 1872 configdirs="$configdirs lto-plugin" 1873 extra_host_libiberty_configure_flags=--enable-shared 1874 fi 1875 fi 1876 AC_SUBST(extra_host_libiberty_configure_flags) 1877 1878 missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ ` 1879 potential_languages=,c, 1880 1881 for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do 1882 case ${lang_frag} in 1883 ..) ;; 1884 # The odd quoting in the next line works around 1885 # an apparent bug in bash 1.12 on linux. 1886 ${srcdir}/gcc/[[*]]/config-lang.in) ;; 1887 *) 1888 # From the config-lang.in, get $language, $target_libs, 1889 # $lang_dirs, $boot_language, and $build_by_default 1890 language= 1891 target_libs= 1892 lang_dirs= 1893 subdir_requires= 1894 boot_language=no 1895 build_by_default=yes 1896 . ${lang_frag} 1897 if test x${language} = x; then 1898 echo "${lang_frag} doesn't set \$language." 1>&2 1899 exit 1 1900 fi 1901 1902 if test "$language" = "c++" \ 1903 && test "$ENABLE_BUILD_WITH_CXX" = "yes"; then 1904 boot_language=yes 1905 fi 1906 1907 case ,${enable_languages}, in 1908 *,${language},*) 1909 # Language was explicitly selected; include it. 1910 add_this_lang=yes 1911 ;; 1912 *,all,*) 1913 # 'all' was selected, select it if it is a default language 1914 add_this_lang=${build_by_default} 1915 ;; 1916 *) 1917 add_this_lang=no 1918 ;; 1919 esac 1920 1921 # Disable languages that need other directories if these aren't available. 1922 for i in $subdir_requires; do 1923 test -f "$srcdir/gcc/$i/config-lang.in" && continue 1924 case ,${enable_languages}, in 1925 *,${language},*) 1926 # Specifically requested language; tell them. 1927 AC_MSG_ERROR([The gcc/$i directory contains parts of $language but is missing]) 1928 ;; 1929 *) 1930 # Silently disable. 1931 add_this_lang=unsupported 1932 ;; 1933 esac 1934 done 1935 1936 # Disable Ada if no preexisting GNAT is available. 1937 case ,${enable_languages},:${language}:${have_gnat} in 1938 *,${language},*:ada:no) 1939 # Specifically requested language; tell them. 1940 AC_MSG_ERROR([GNAT is required to build $language]) 1941 ;; 1942 *:ada:no) 1943 # Silently disable. 1944 add_this_lang=unsupported 1945 ;; 1946 esac 1947 1948 # Disable a language that is unsupported by the target. 1949 case " $unsupported_languages " in 1950 *" $language "*) 1951 add_this_lang=unsupported 1952 ;; 1953 esac 1954 1955 case $add_this_lang in 1956 unsupported) 1957 # Remove language-dependent dirs. 1958 eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\" 1959 ;; 1960 no) 1961 # Remove language-dependent dirs; still show language as supported. 1962 eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\" 1963 potential_languages="${potential_languages}${language}," 1964 ;; 1965 yes) 1966 new_enable_languages="${new_enable_languages}${language}," 1967 potential_languages="${potential_languages}${language}," 1968 missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"` 1969 case "${boot_language}:,$enable_stage1_languages," in 1970 yes:* | *:*,$language,* | *:*,yes, | *:*,all,) 1971 # Add to (comma-separated) list of stage 1 languages. 1972 case ",$stage1_languages," in 1973 *,$language,* | ,yes, | ,all,) ;; 1974 *) stage1_languages="${stage1_languages}${language}," ;; 1975 esac 1976 # We need to bootstrap any supporting libraries. 1977 bootstrap_target_libs="${bootstrap_target_libs}${target_libs}," 1978 ;; 1979 esac 1980 ;; 1981 esac 1982 ;; 1983 esac 1984 done 1985 1986 AC_ARG_ENABLE(stage1-languages, 1987[ --enable-stage1-languages@<:@=all@:>@ choose additional languages to build during 1988 stage1. Mostly useful for compiler development.], 1989 [case ,${enable_stage1_languages}, in 1990 ,no,|,,) 1991 # Set it to something that will have no effect in the loop below 1992 enable_stage1_languages=c ;; 1993 ,yes,) 1994 enable_stage1_languages=`echo $new_enable_languages | \ 1995 sed -e "s/^,//" -e "s/,$//" ` ;; 1996 *,all,*) 1997 enable_stage1_languages=`echo ,$enable_stage1_languages, | \ 1998 sed -e "s/,all,/$new_enable_languages/" -e "s/^,//" -e "s/,$//" ` ;; 1999 esac 2000 2001 # Add "good" languages from enable_stage1_languages to stage1_languages, 2002 # while "bad" languages go in missing_languages. Leave no duplicates. 2003 for i in `echo $enable_stage1_languages | sed 's/,/ /g' `; do 2004 case $potential_languages in 2005 *,$i,*) 2006 case $stage1_languages in 2007 *,$i,*) ;; 2008 *) stage1_languages="$stage1_languages$i," ;; 2009 esac ;; 2010 *) 2011 case $missing_languages in 2012 *,$i,*) ;; 2013 *) missing_languages="$missing_languages$i," ;; 2014 esac ;; 2015 esac 2016 done]) 2017 2018 # Remove leading/trailing commas that were added for simplicity 2019 potential_languages=`echo "$potential_languages" | sed -e "s/^,//" -e "s/,$//"` 2020 missing_languages=`echo "$missing_languages" | sed -e "s/^,//" -e "s/,$//"` 2021 stage1_languages=`echo "$stage1_languages" | sed -e "s/^,//" -e "s/,$//"` 2022 new_enable_languages=`echo "$new_enable_languages" | sed -e "s/^,//" -e "s/,$//"` 2023 2024 if test "x$missing_languages" != x; then 2025 AC_MSG_ERROR([ 2026The following requested languages could not be built: ${missing_languages} 2027Supported languages are: ${potential_languages}]) 2028 fi 2029 if test "x$new_enable_languages" != "x$enable_languages"; then 2030 echo The following languages will be built: ${new_enable_languages} 2031 enable_languages="$new_enable_languages" 2032 fi 2033 2034 AC_SUBST(stage1_languages) 2035 ac_configure_args=`echo " $ac_configure_args" | sed -e "s/ '--enable-languages=[[^ ]]*'//g" -e "s/$/ '--enable-languages="$enable_languages"'/" ` 2036fi 2037 2038# Handle --disable-<component> generically. 2039for dir in $configdirs $build_configdirs $target_configdirs ; do 2040 dirname=`echo $dir | sed -e s/target-//g -e s/build-//g -e s/-/_/g` 2041 varname=`echo $dirname | sed -e s/+/_/g` 2042 if eval test x\${enable_${varname}} "=" xno ; then 2043 noconfigdirs="$noconfigdirs $dir" 2044 fi 2045done 2046 2047# Check for Boehm's garbage collector 2048AC_ARG_ENABLE(objc-gc, 2049[ --enable-objc-gc enable use of Boehm's garbage collector with the 2050 GNU Objective-C runtime], 2051[case ,${enable_languages},:${enable_objc_gc}:${noconfigdirs} in 2052 *,objc,*:*:yes:*target-boehm-gc*) 2053 AC_MSG_ERROR([Boehm's garbage collector was requested yet not supported in this configuration]) 2054 ;; 2055esac]) 2056 2057# Make sure we only build Boehm's garbage collector if required. 2058case ,${enable_languages},:${enable_objc_gc} in 2059 *,objc,*:yes) 2060 # Keep target-boehm-gc if requested for Objective-C. 2061 ;; 2062 *) 2063 # Otherwise remove target-boehm-gc depending on target-libjava. 2064 if echo " ${noconfigdirs} " | grep "target-libjava" >/dev/null 2>&1; then 2065 noconfigdirs="$noconfigdirs target-boehm-gc" 2066 fi 2067 ;; 2068esac 2069 2070# Remove the entries in $skipdirs and $noconfigdirs from $configdirs, 2071# $build_configdirs and $target_configdirs. 2072# If we have the source for $noconfigdirs entries, add them to $notsupp. 2073 2074notsupp="" 2075for dir in . $skipdirs $noconfigdirs ; do 2076 dirname=`echo $dir | sed -e s/target-//g -e s/build-//g` 2077 if test $dir != . && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then 2078 configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"` 2079 if test -r $srcdir/$dirname/configure ; then 2080 if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then 2081 true 2082 else 2083 notsupp="$notsupp $dir" 2084 fi 2085 fi 2086 fi 2087 if test $dir != . && echo " ${build_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then 2088 build_configdirs=`echo " ${build_configdirs} " | sed -e "s/ ${dir} / /"` 2089 if test -r $srcdir/$dirname/configure ; then 2090 if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then 2091 true 2092 else 2093 notsupp="$notsupp $dir" 2094 fi 2095 fi 2096 fi 2097 if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then 2098 target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"` 2099 if test -r $srcdir/$dirname/configure ; then 2100 if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then 2101 true 2102 else 2103 notsupp="$notsupp $dir" 2104 fi 2105 fi 2106 fi 2107done 2108 2109# Quietly strip out all directories which aren't configurable in this tree. 2110# This relies on all configurable subdirectories being autoconfiscated, which 2111# is now the case. 2112build_configdirs_all="$build_configdirs" 2113build_configdirs= 2114for i in ${build_configdirs_all} ; do 2115 j=`echo $i | sed -e s/build-//g` 2116 if test -f ${srcdir}/$j/configure ; then 2117 build_configdirs="${build_configdirs} $i" 2118 fi 2119done 2120 2121configdirs_all="$configdirs" 2122configdirs= 2123for i in ${configdirs_all} ; do 2124 if test -f ${srcdir}/$i/configure ; then 2125 configdirs="${configdirs} $i" 2126 fi 2127done 2128 2129target_configdirs_all="$target_configdirs" 2130target_configdirs= 2131for i in ${target_configdirs_all} ; do 2132 j=`echo $i | sed -e s/target-//g` 2133 if test -f ${srcdir}/$j/configure ; then 2134 target_configdirs="${target_configdirs} $i" 2135 fi 2136done 2137 2138# Produce a warning message for the subdirs we can't configure. 2139# This isn't especially interesting in the Cygnus tree, but in the individual 2140# FSF releases, it's important to let people know when their machine isn't 2141# supported by the one or two programs in a package. 2142 2143if test -n "${notsupp}" && test -z "${norecursion}" ; then 2144 # If $appdirs is non-empty, at least one of those directories must still 2145 # be configured, or we error out. (E.g., if the gas release supports a 2146 # specified target in some subdirs but not the gas subdir, we shouldn't 2147 # pretend that all is well.) 2148 if test -n "$appdirs" ; then 2149 for dir in $appdirs ; do 2150 if test -r $dir/Makefile.in ; then 2151 if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then 2152 appdirs="" 2153 break 2154 fi 2155 if echo " ${target_configdirs} " | grep " target-${dir} " >/dev/null 2>&1; then 2156 appdirs="" 2157 break 2158 fi 2159 fi 2160 done 2161 if test -n "$appdirs" ; then 2162 echo "*** This configuration is not supported by this package." 1>&2 2163 exit 1 2164 fi 2165 fi 2166 # Okay, some application will build, or we don't care to check. Still 2167 # notify of subdirs not getting built. 2168 echo "*** This configuration is not supported in the following subdirectories:" 1>&2 2169 echo " ${notsupp}" 1>&2 2170 echo " (Any other directories should still work fine.)" 1>&2 2171fi 2172 2173case "$host" in 2174 *msdosdjgpp*) 2175 enable_gdbtk=no ;; 2176esac 2177 2178# To find our prefix, in gcc_cv_tool_prefix. 2179ACX_TOOL_DIRS 2180 2181copy_dirs= 2182 2183AC_ARG_WITH([build-sysroot], 2184 [ --with-build-sysroot=SYSROOT 2185 use sysroot as the system root during the build], 2186 [if test x"$withval" != x ; then 2187 SYSROOT_CFLAGS_FOR_TARGET="--sysroot=$withval" 2188 fi], 2189 [SYSROOT_CFLAGS_FOR_TARGET=]) 2190AC_SUBST(SYSROOT_CFLAGS_FOR_TARGET) 2191 2192AC_ARG_WITH([debug-prefix-map], 2193 [ --with-debug-prefix-map='A=B C=D ...' 2194 map A to B, C to D ... in debug information], 2195 [if test x"$withval" != x; then 2196 DEBUG_PREFIX_CFLAGS_FOR_TARGET= 2197 for debug_map in $withval; do 2198 DEBUG_PREFIX_CFLAGS_FOR_TARGET="$DEBUG_PREFIX_CFLAGS_FOR_TARGET -fdebug-prefix-map=$debug_map" 2199 done 2200 fi], 2201 [DEBUG_PREFIX_CFLAGS_FOR_TARGET=]) 2202AC_SUBST(DEBUG_PREFIX_CFLAGS_FOR_TARGET) 2203 2204# During gcc bootstrap, if we use some random cc for stage1 then CFLAGS 2205# might be empty or "-g". We don't require a C++ compiler, so CXXFLAGS 2206# might also be empty (or "-g", if a non-GCC C++ compiler is in the path). 2207# We want to ensure that TARGET libraries (which we know are built with 2208# gcc) are built with "-O2 -g", so include those options when setting 2209# CFLAGS_FOR_TARGET and CXXFLAGS_FOR_TARGET. 2210if test "x$CFLAGS_FOR_TARGET" = x; then 2211 CFLAGS_FOR_TARGET=$CFLAGS 2212 case " $CFLAGS " in 2213 *" -O2 "*) ;; 2214 *) CFLAGS_FOR_TARGET="-O2 $CFLAGS" ;; 2215 esac 2216 case " $CFLAGS " in 2217 *" -g "* | *" -g3 "*) ;; 2218 *) CFLAGS_FOR_TARGET="-g $CFLAGS" ;; 2219 esac 2220fi 2221AC_SUBST(CFLAGS_FOR_TARGET) 2222 2223if test "x$CXXFLAGS_FOR_TARGET" = x; then 2224 CXXFLAGS_FOR_TARGET=$CXXFLAGS 2225 case " $CXXFLAGS " in 2226 *" -O2 "*) ;; 2227 *) CXXFLAGS_FOR_TARGET="-O2 $CXXFLAGS" ;; 2228 esac 2229 case " $CXXFLAGS " in 2230 *" -g "* | *" -g3 "*) ;; 2231 *) CXXFLAGS_FOR_TARGET="-g $CXXFLAGS" ;; 2232 esac 2233fi 2234AC_SUBST(CXXFLAGS_FOR_TARGET) 2235 2236# Handle --with-headers=XXX. If the value is not "yes", the contents of 2237# the named directory are copied to $(tooldir)/sys-include. 2238if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then 2239 if test x${is_cross_compiler} = xno ; then 2240 echo 1>&2 '***' --with-headers is only supported when cross compiling 2241 exit 1 2242 fi 2243 if test x"${with_headers}" != xyes ; then 2244 x=${gcc_cv_tool_prefix} 2245 copy_dirs="${copy_dirs} ${with_headers} $x/${target_noncanonical}/sys-include" 2246 fi 2247fi 2248 2249# Handle --with-libs=XXX. If the value is not "yes", the contents of 2250# the name directories are copied to $(tooldir)/lib. Multiple directories 2251# are permitted. 2252if test x"${with_libs}" != x && test x"${with_libs}" != xno ; then 2253 if test x${is_cross_compiler} = xno ; then 2254 echo 1>&2 '***' --with-libs is only supported when cross compiling 2255 exit 1 2256 fi 2257 if test x"${with_libs}" != xyes ; then 2258 # Copy the libraries in reverse order, so that files in the first named 2259 # library override files in subsequent libraries. 2260 x=${gcc_cv_tool_prefix} 2261 for l in ${with_libs}; do 2262 copy_dirs="$l $x/${target_noncanonical}/lib ${copy_dirs}" 2263 done 2264 fi 2265fi 2266 2267# Set with_gnu_as, with_gnu_ld, and with_system_zlib as appropriate. 2268# 2269# This is done by determining whether or not the appropriate directory 2270# is available, and by checking whether or not specific configurations 2271# have requested that this magic not happen. 2272# 2273# The command line options always override the explicit settings in 2274# configure.in, and the settings in configure.in override this magic. 2275# 2276# If the default for a toolchain is to use GNU as and ld, and you don't 2277# want to do that, then you should use the --without-gnu-as and 2278# --without-gnu-ld options for the configure script. Similarly, if 2279# the default is to use the included zlib and you don't want to do that, 2280# you should use the --with-system-zlib option for the configure script. 2281 2282if test x${use_gnu_as} = x && 2283 echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then 2284 with_gnu_as=yes 2285 extra_host_args="$extra_host_args --with-gnu-as" 2286fi 2287 2288if test x${use_gnu_ld} = x && 2289 echo " ${configdirs} " | egrep " (go)?ld " > /dev/null 2>&1 ; then 2290 with_gnu_ld=yes 2291 extra_host_args="$extra_host_args --with-gnu-ld" 2292fi 2293 2294if test x${use_included_zlib} = x && 2295 echo " ${configdirs} " | grep " zlib " > /dev/null 2>&1 ; then 2296 : 2297else 2298 with_system_zlib=yes 2299 extra_host_args="$extra_host_args --with-system-zlib" 2300fi 2301 2302# If using newlib, add --with-newlib to the extra_host_args so that gcc/configure 2303# can detect this case. 2304 2305if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then 2306 with_newlib=yes 2307 extra_host_args="$extra_host_args --with-newlib" 2308fi 2309 2310# Handle ${copy_dirs} 2311set fnord ${copy_dirs} 2312shift 2313while test $# != 0 ; do 2314 if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then 2315 : 2316 else 2317 echo Copying $1 to $2 2318 2319 # Use the install script to create the directory and all required 2320 # parent directories. 2321 if test -d $2 ; then 2322 : 2323 else 2324 echo >config.temp 2325 ${srcdir}/install-sh -c -m 644 config.temp $2/COPIED 2326 fi 2327 2328 # Copy the directory, assuming we have tar. 2329 # FIXME: Should we use B in the second tar? Not all systems support it. 2330 (cd $1; tar -cf - .) | (cd $2; tar -xpf -) 2331 2332 # It is the responsibility of the user to correctly adjust all 2333 # symlinks. If somebody can figure out how to handle them correctly 2334 # here, feel free to add the code. 2335 2336 echo $1 > $2/COPIED 2337 fi 2338 shift; shift 2339done 2340 2341# Determine a target-dependent exec_prefix that the installed 2342# gcc will search in. Keep this list sorted by triplet, with 2343# the *-*-osname triplets last. 2344md_exec_prefix= 2345case "${target}" in 2346 alpha*-*-*vms*) 2347 md_exec_prefix=/gnu/lib/gcc-lib 2348 ;; 2349 i[[34567]]86-pc-msdosdjgpp*) 2350 md_exec_prefix=/dev/env/DJDIR/bin 2351 ;; 2352 i[[34567]]86-*-sco3.2v5*) 2353 if test $with_gnu_as = yes; then 2354 md_exec_prefix=/usr/gnu/bin 2355 else 2356 md_exec_prefix=/usr/ccs/bin/elf 2357 fi 2358 ;; 2359 2360 mn10300-*-* | \ 2361 powerpc-*-chorusos* | \ 2362 powerpc*-*-eabi* | \ 2363 powerpc*-*-sysv* | \ 2364 powerpc*-*-kaos* | \ 2365 s390x-ibm-tpf*) 2366 md_exec_prefix=/usr/ccs/bin 2367 ;; 2368 sparc64-*-elf*) 2369 ;; 2370 v850*-*-*) 2371 md_exec_prefix=/usr/ccs/bin 2372 ;; 2373 xtensa*-*-elf*) 2374 ;; 2375 2376 *-*-beos* | \ 2377 *-*-elf* | \ 2378 *-*-hpux* | \ 2379 *-*-netware* | \ 2380 *-*-nto-qnx* | \ 2381 *-*-rtems* | \ 2382 *-*-solaris2* | \ 2383 *-*-sysv[[45]]* | \ 2384 *-*-vxworks* | \ 2385 *-wrs-windiss) 2386 md_exec_prefix=/usr/ccs/bin 2387 ;; 2388esac 2389 2390extra_arflags_for_target= 2391extra_nmflags_for_target= 2392extra_ranlibflags_for_target= 2393target_makefile_frag=/dev/null 2394case "${target}" in 2395 mep*-*-*) 2396 target_makefile_frag="config/mt-mep" 2397 ;; 2398 spu-*-*) 2399 target_makefile_frag="config/mt-spu" 2400 ;; 2401 mips*-sde-elf*) 2402 target_makefile_frag="config/mt-sde" 2403 ;; 2404 mipsisa*-*-elfoabi*) 2405 target_makefile_frag="config/mt-mips-elfoabi" 2406 ;; 2407 mips*-*-*linux* | mips*-*-gnu*) 2408 target_makefile_frag="config/mt-mips-gnu" 2409 ;; 2410 *-*-netware*) 2411 target_makefile_frag="config/mt-netware" 2412 ;; 2413 *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu) 2414 target_makefile_frag="config/mt-gnu" 2415 ;; 2416 *-*-aix4.[[3456789]]* | *-*-aix[[56789]].*) 2417 # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm 2418 # commands to handle both 32-bit and 64-bit objects. These flags are 2419 # harmless if we're using GNU nm or ar. 2420 extra_arflags_for_target=" -X32_64" 2421 extra_nmflags_for_target=" -B -X32_64" 2422 ;; 2423 *-*-darwin[[3-9]]*) 2424 # ranlib before Darwin10 requires the -c flag to look at common symbols. 2425 extra_ranlibflags_for_target=" -c" 2426 ;; 2427 mips*-*-pe | sh*-*-pe | *arm-wince-pe) 2428 target_makefile_frag="config/mt-wince" 2429 ;; 2430esac 2431 2432alphaieee_frag=/dev/null 2433case $target in 2434 alpha*-*-*) 2435 # This just makes sure to use the -mieee option to build target libs. 2436 # This should probably be set individually by each library. 2437 alphaieee_frag="config/mt-alphaieee" 2438 ;; 2439esac 2440 2441# If --enable-target-optspace always use -Os instead of -O2 to build 2442# the target libraries, similarly if it is not specified, use -Os 2443# on selected platforms. 2444ospace_frag=/dev/null 2445case "${enable_target_optspace}:${target}" in 2446 yes:*) 2447 ospace_frag="config/mt-ospace" 2448 ;; 2449 :d30v-*) 2450 ospace_frag="config/mt-d30v" 2451 ;; 2452 :m32r-* | :d10v-* | :fr30-*) 2453 ospace_frag="config/mt-ospace" 2454 ;; 2455 no:* | :*) 2456 ;; 2457 *) 2458 echo "*** bad value \"${enable_target_optspace}\" for --enable-target-optspace flag; ignored" 1>&2 2459 ;; 2460esac 2461 2462# Default to using --with-stabs for certain targets. 2463if test x${with_stabs} = x ; then 2464 case "${target}" in 2465 mips*-*-irix[[56]]*) 2466 ;; 2467 mips*-*-* | alpha*-*-osf*) 2468 with_stabs=yes; 2469 extra_host_args="${extra_host_args} --with-stabs" 2470 ;; 2471 esac 2472fi 2473 2474# hpux11 in 64bit mode has libraries in a weird place. Arrange to find 2475# them automatically. 2476case "${host}" in 2477 hppa*64*-*-hpux11*) 2478 extra_host_args="$extra_host_args -x-libraries=/usr/lib/pa20_64 -x-includes=/usr/X11R6/include" 2479 ;; 2480esac 2481 2482# Some systems (e.g., one of the i386-aix systems the gas testers are 2483# using) don't handle "\$" correctly, so don't use it here. 2484tooldir='${exec_prefix}'/${target_noncanonical} 2485build_tooldir=${tooldir} 2486 2487# Create a .gdbinit file which runs the one in srcdir 2488# and tells GDB to look there for source files. 2489 2490if test -r ${srcdir}/.gdbinit ; then 2491 case ${srcdir} in 2492 .) ;; 2493 *) cat > ./.gdbinit <<EOF 2494# ${NO_EDIT} 2495dir ${srcdir} 2496dir . 2497source ${srcdir}/.gdbinit 2498EOF 2499 ;; 2500 esac 2501fi 2502 2503# Make sure that the compiler is able to generate an executable. If it 2504# can't, we are probably in trouble. We don't care whether we can run the 2505# executable--we might be using a cross compiler--we only care whether it 2506# can be created. At this point the main configure script has set CC. 2507we_are_ok=no 2508echo "int main () { return 0; }" > conftest.c 2509${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c 2510if test $? = 0 ; then 2511 if test -s conftest || test -s conftest.exe ; then 2512 we_are_ok=yes 2513 fi 2514fi 2515case $we_are_ok in 2516 no) 2517 echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed." 2518 echo 1>&2 "*** You must set the environment variable CC to a working compiler." 2519 rm -f conftest* 2520 exit 1 2521 ;; 2522esac 2523rm -f conftest* 2524 2525# The Solaris /usr/ucb/cc compiler does not appear to work. 2526case "${host}" in 2527 sparc-sun-solaris2*) 2528 CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`" 2529 if test "`type $CCBASE | sed 's/^[[^/]]*//'`" = "/usr/ucb/cc" ; then 2530 could_use= 2531 test -d /opt/SUNWspro/bin && could_use="/opt/SUNWspro/bin" 2532 if test -d /opt/cygnus/bin ; then 2533 if test "$could_use" = "" ; then 2534 could_use="/opt/cygnus/bin" 2535 else 2536 could_use="$could_use or /opt/cygnus/bin" 2537 fi 2538 fi 2539 if test "$could_use" = "" ; then 2540 echo "Warning: compilation may fail because you're using" 2541 echo "/usr/ucb/cc. You should change your PATH or CC " 2542 echo "variable and rerun configure." 2543 else 2544 echo "Warning: compilation may fail because you're using" 2545 echo "/usr/ucb/cc, when you should use the C compiler from" 2546 echo "$could_use. You should change your" 2547 echo "PATH or CC variable and rerun configure." 2548 fi 2549 fi 2550 ;; 2551esac 2552 2553# Decide which environment variable is used to find dynamic libraries. 2554case "${host}" in 2555 *-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;; 2556 *-*-darwin* | *-*-rhapsody* ) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;; 2557 *-*-mingw* | *-*-cygwin ) RPATH_ENVVAR=PATH ;; 2558 *) RPATH_ENVVAR=LD_LIBRARY_PATH ;; 2559esac 2560 2561# On systems where the dynamic library environment variable is PATH, 2562# gcc/ will put dynamic libraries into a subdirectory to avoid adding 2563# built executables to PATH. 2564if test "$RPATH_ENVVAR" = PATH; then 2565 GCC_SHLIB_SUBDIR=/shlib 2566else 2567 GCC_SHLIB_SUBDIR= 2568fi 2569 2570# Record target_configdirs and the configure arguments for target and 2571# build configuration in Makefile. 2572target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'` 2573build_configdirs=`echo "${build_configdirs}" | sed -e 's/build-//g'` 2574 2575# If we are building libgomp, bootstrap it. 2576if echo " ${target_configdirs} " | grep " libgomp " > /dev/null 2>&1 ; then 2577 bootstrap_target_libs=${bootstrap_target_libs}target-libgomp, 2578fi 2579 2580# Determine whether gdb needs tk/tcl or not. 2581# Use 'maybe' since enable_gdbtk might be true even if tk isn't available 2582# and in that case we want gdb to be built without tk. Ugh! 2583# In fact I believe gdb is the *only* package directly dependent on tk, 2584# so we should be able to put the 'maybe's in unconditionally and 2585# leave out the maybe dependencies when enable_gdbtk is false. I'm not 2586# 100% sure that that's safe though. 2587 2588gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-libgui" 2589case "$enable_gdbtk" in 2590 no) 2591 GDB_TK="" ;; 2592 yes) 2593 GDB_TK="${gdb_tk}" ;; 2594 *) 2595 # Only add the dependency on gdbtk when GDBtk is part of the gdb 2596 # distro. Eventually someone will fix this and move Insight, nee 2597 # gdbtk to a separate directory. 2598 if test -d ${srcdir}/gdb/gdbtk ; then 2599 GDB_TK="${gdb_tk}" 2600 else 2601 GDB_TK="" 2602 fi 2603 ;; 2604esac 2605CONFIGURE_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-configure-/g` 2606INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g` 2607 2608# Strip out unwanted targets. 2609 2610# While at that, we remove Makefiles if we were started for recursive 2611# configuration, so that the top-level Makefile reconfigures them, 2612# like we used to do when configure itself was recursive. 2613 2614# Loop over modules. We used to use the "$extrasub" feature from Autoconf 2615# but now we're fixing up the Makefile ourselves with the additional 2616# commands passed to AC_CONFIG_FILES. Use separate variables 2617# extrasub-{build,host,target} not because there is any reason to split 2618# the substitutions up that way, but only to remain below the limit of 2619# 99 commands in a script, for HP-UX sed. 2620# Do not nest @if/@endif pairs, because configure will not warn you at all. 2621 2622AC_ARG_ENABLE([bootstrap], 2623[ --enable-bootstrap enable bootstrapping @<:@yes if native build@:>@],, 2624enable_bootstrap=default) 2625 2626# Issue errors and warnings for invalid/strange bootstrap combinations. 2627case "$configdirs" in 2628 *gcc*) have_compiler=yes ;; 2629 *) have_compiler=no ;; 2630esac 2631 2632case "$have_compiler:$host:$target:$enable_bootstrap" in 2633 *:*:*:no) ;; 2634 2635 # Default behavior. Enable bootstrap if we have a compiler 2636 # and we are in a native configuration. 2637 yes:$build:$build:default) 2638 enable_bootstrap=yes ;; 2639 2640 *:*:*:default) 2641 enable_bootstrap=no ;; 2642 2643 # We have a compiler and we are in a native configuration, bootstrap is ok 2644 yes:$build:$build:yes) 2645 ;; 2646 2647 # Other configurations, but we have a compiler. Assume the user knows 2648 # what he's doing. 2649 yes:*:*:yes) 2650 AC_MSG_WARN([trying to bootstrap a cross compiler]) 2651 ;; 2652 2653 # No compiler: if they passed --enable-bootstrap explicitly, fail 2654 no:*:*:yes) 2655 AC_MSG_ERROR([cannot bootstrap without a compiler]) ;; 2656 2657 # Fail if wrong command line 2658 *) 2659 AC_MSG_ERROR([invalid option for --enable-bootstrap]) 2660 ;; 2661esac 2662 2663case ",$enable_languages,:$ENABLE_BUILD_WITH_CXX:$enable_bootstrap" in 2664 *,c++,*:yes:yes) ;; 2665 *:yes:yes) 2666 AC_MSG_ERROR([bootstrapping with --enable-build-with-cxx requires c++ in --enable-languages]) 2667 ;; 2668esac 2669 2670case "$enable_bootstrap:$ENABLE_GOLD: $configdirs :,$stage1_languages," in 2671 yes:yes:*\ gold\ *:*,c++,*) ;; 2672 yes:yes:*\ gold\ *:*) 2673 AC_MSG_ERROR([in a combined tree, bootstrapping with --enable-gold requires c++ in stage1_languages]) 2674 ;; 2675esac 2676 2677# Adjust the toplevel makefile according to whether bootstrap was selected. 2678case $enable_bootstrap in 2679 yes) 2680 bootstrap_suffix=bootstrap 2681 BUILD_CONFIG=bootstrap-debug 2682 ;; 2683 no) 2684 bootstrap_suffix=no-bootstrap 2685 BUILD_CONFIG= 2686 ;; 2687esac 2688 2689AC_MSG_CHECKING(for default BUILD_CONFIG) 2690 2691AC_ARG_WITH([build-config], 2692 [--with-build-config='NAME NAME2...' 2693 Use config/NAME.mk build configuration], 2694 [case $with_build_config in 2695 yes) with_build_config= ;; 2696 no) with_build_config= BUILD_CONFIG= ;; 2697 esac]) 2698 2699if test "x${with_build_config}" != x; then 2700 BUILD_CONFIG=$with_build_config 2701else 2702 case $BUILD_CONFIG in 2703 bootstrap-debug) 2704 if echo "int f (void) { return 0; }" > conftest.c && 2705 ${CC} -c conftest.c && 2706 mv conftest.o conftest.o.g0 && 2707 ${CC} -c -g conftest.c && 2708 mv conftest.o conftest.o.g && 2709 ${srcdir}/contrib/compare-debug conftest.o.g0 conftest.o.g > /dev/null 2>&1; then 2710 : 2711 else 2712 BUILD_CONFIG= 2713 fi 2714 rm -f conftest.c conftest.o conftest.o.g0 conftest.o.g 2715 ;; 2716 esac 2717fi 2718AC_MSG_RESULT($BUILD_CONFIG) 2719AC_SUBST(BUILD_CONFIG) 2720 2721extrasub_build= 2722for module in ${build_configdirs} ; do 2723 if test -z "${no_recursion}" \ 2724 && test -f ${build_subdir}/${module}/Makefile; then 2725 echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure" 2726 rm -f ${build_subdir}/${module}/Makefile 2727 fi 2728 extrasub_build="$extrasub_build 2729/^@if build-$module\$/d 2730/^@endif build-$module\$/d 2731/^@if build-$module-$bootstrap_suffix\$/d 2732/^@endif build-$module-$bootstrap_suffix\$/d" 2733done 2734extrasub_host= 2735for module in ${configdirs} ; do 2736 if test -z "${no_recursion}"; then 2737 for file in stage*-${module}/Makefile prev-${module}/Makefile ${module}/Makefile; do 2738 if test -f ${file}; then 2739 echo 1>&2 "*** removing ${file} to force reconfigure" 2740 rm -f ${file} 2741 fi 2742 done 2743 fi 2744 extrasub_host="$extrasub_host 2745/^@if $module\$/d 2746/^@endif $module\$/d 2747/^@if $module-$bootstrap_suffix\$/d 2748/^@endif $module-$bootstrap_suffix\$/d" 2749done 2750extrasub_target= 2751for module in ${target_configdirs} ; do 2752 if test -z "${no_recursion}" \ 2753 && test -f ${target_subdir}/${module}/Makefile; then 2754 echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure" 2755 rm -f ${target_subdir}/${module}/Makefile 2756 fi 2757 2758 # We only bootstrap target libraries listed in bootstrap_target_libs. 2759 case $bootstrap_target_libs in 2760 *,target-$module,*) target_bootstrap_suffix=$bootstrap_suffix ;; 2761 *) target_bootstrap_suffix=no-bootstrap ;; 2762 esac 2763 2764 extrasub_target="$extrasub_target 2765/^@if target-$module\$/d 2766/^@endif target-$module\$/d 2767/^@if target-$module-$target_bootstrap_suffix\$/d 2768/^@endif target-$module-$target_bootstrap_suffix\$/d" 2769done 2770 2771# Do the final fixup along with target modules. 2772extrasub_target="$extrasub_target 2773/^@if /,/^@endif /d" 2774 2775# Create the serialization dependencies. This uses a temporary file. 2776 2777AC_ARG_ENABLE([serial-configure], 2778[ --enable-serial-@<:@{host,target,build}-@:>@configure 2779 force sequential configuration of 2780 sub-packages for the host, target or build 2781 machine, or all sub-packages]) 2782 2783case ${enable_serial_configure} in 2784 yes) 2785 enable_serial_build_configure=yes 2786 enable_serial_host_configure=yes 2787 enable_serial_target_configure=yes 2788 ;; 2789esac 2790 2791# These force 'configure's to be done one at a time, to avoid problems 2792# with contention over a shared config.cache. 2793rm -f serdep.tmp 2794echo '# serdep.tmp' > serdep.tmp 2795olditem= 2796test "x${enable_serial_build_configure}" = xyes && 2797for item in ${build_configdirs} ; do 2798 case ${olditem} in 2799 "") ;; 2800 *) echo "configure-build-${item}: configure-build-${olditem}" >> serdep.tmp ;; 2801 esac 2802 olditem=${item} 2803done 2804olditem= 2805test "x${enable_serial_host_configure}" = xyes && 2806for item in ${configdirs} ; do 2807 case ${olditem} in 2808 "") ;; 2809 *) echo "configure-${item}: configure-${olditem}" >> serdep.tmp ;; 2810 esac 2811 olditem=${item} 2812done 2813olditem= 2814test "x${enable_serial_target_configure}" = xyes && 2815for item in ${target_configdirs} ; do 2816 case ${olditem} in 2817 "") ;; 2818 *) echo "configure-target-${item}: configure-target-${olditem}" >> serdep.tmp ;; 2819 esac 2820 olditem=${item} 2821done 2822serialization_dependencies=serdep.tmp 2823AC_SUBST_FILE(serialization_dependencies) 2824 2825# Base args. Strip norecursion, cache-file, srcdir, host, build, 2826# target, nonopt, and variable assignments. These are the ones we 2827# might not want to pass down to subconfigures. The exception being 2828# --cache-file=/dev/null, which is used to turn off the use of cache 2829# files altogether, and which should be passed on to subconfigures. 2830# Also strip program-prefix, program-suffix, and program-transform-name, 2831# so that we can pass down a consistent program-transform-name. 2832baseargs= 2833keep_next=no 2834skip_next=no 2835eval "set -- $ac_configure_args" 2836for ac_arg 2837do 2838 if test X"$skip_next" = X"yes"; then 2839 skip_next=no 2840 continue 2841 fi 2842 if test X"$keep_next" = X"yes"; then 2843 case $ac_arg in 2844 *\'*) 2845 ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; 2846 esac 2847 baseargs="$baseargs '$ac_arg'" 2848 keep_next=no 2849 continue 2850 fi 2851 2852 # Handle separated arguments. Based on the logic generated by 2853 # autoconf 2.59. 2854 case $ac_arg in 2855 *=* | --config-cache | -C | -disable-* | --disable-* \ 2856 | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ 2857 | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ 2858 | -with-* | --with-* | -without-* | --without-* | --x) 2859 separate_arg=no 2860 ;; 2861 -*) 2862 separate_arg=yes 2863 ;; 2864 *) 2865 separate_arg=no 2866 ;; 2867 esac 2868 2869 case "$ac_arg" in 2870 --cache-file=/dev/null | \ 2871 -cache-file=/dev/null ) 2872 # Handled here to avoid the test to skip args below. 2873 baseargs="$baseargs '$ac_arg'" 2874 # Assert: $separate_arg should always be no. 2875 keep_next=$separate_arg 2876 ;; 2877 --no*) 2878 continue 2879 ;; 2880 --c* | \ 2881 --sr* | \ 2882 --ho* | \ 2883 --bu* | \ 2884 --t* | \ 2885 --program-* | \ 2886 -cache_file* | \ 2887 -srcdir* | \ 2888 -host* | \ 2889 -build* | \ 2890 -target* | \ 2891 -program-prefix* | \ 2892 -program-suffix* | \ 2893 -program-transform-name* ) 2894 skip_next=$separate_arg 2895 continue 2896 ;; 2897 -*) 2898 # An option. Add it. 2899 case $ac_arg in 2900 *\'*) 2901 ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; 2902 esac 2903 baseargs="$baseargs '$ac_arg'" 2904 keep_next=$separate_arg 2905 ;; 2906 *) 2907 # Either a variable assignment, or a nonopt (triplet). Don't 2908 # pass it down; let the Makefile handle this. 2909 continue 2910 ;; 2911 esac 2912done 2913# Remove the initial space we just introduced and, as these will be 2914# expanded by make, quote '$'. 2915baseargs=`echo "x$baseargs" | sed -e 's/^x *//' -e 's,\\$,$$,g'` 2916 2917# Add in --program-transform-name, after --program-prefix and 2918# --program-suffix have been applied to it. Autoconf has already 2919# doubled dollar signs and backslashes in program_transform_name; we want 2920# the backslashes un-doubled, and then the entire thing wrapped in single 2921# quotes, because this will be expanded first by make and then by the shell. 2922# Also, because we want to override the logic in subdir configure scripts to 2923# choose program_transform_name, replace any s,x,x, with s,y,y,. 2924sed -e "s,\\\\\\\\,\\\\,g; s,','\\\\'',g; s/s,x,x,/s,y,y,/" <<EOF_SED > conftestsed.out 2925${program_transform_name} 2926EOF_SED 2927gcc_transform_name=`cat conftestsed.out` 2928rm -f conftestsed.out 2929baseargs="$baseargs --program-transform-name='${gcc_transform_name}'" 2930if test "$silent" = yes; then 2931 baseargs="$baseargs --silent" 2932fi 2933baseargs="$baseargs --disable-option-checking" 2934 2935# For the build-side libraries, we just need to pretend we're native, 2936# and not use the same cache file. Multilibs are neither needed nor 2937# desired. 2938build_configargs="--cache-file=../config.cache ${baseargs}" 2939 2940# For host modules, accept cache file option, or specification as blank. 2941case "${cache_file}" in 2942"") # empty 2943 cache_file_option="" ;; 2944/* | [[A-Za-z]]:[[\\/]]* ) # absolute path 2945 cache_file_option="--cache-file=${cache_file}" ;; 2946*) # relative path 2947 cache_file_option="--cache-file=../${cache_file}" ;; 2948esac 2949 2950# Host dirs don't like to share a cache file either, horribly enough. 2951# This seems to be due to autoconf 2.5x stupidity. 2952host_configargs="--cache-file=./config.cache ${extra_host_args} ${baseargs}" 2953 2954target_configargs=${baseargs} 2955 2956# Passing a --with-cross-host argument lets the target libraries know 2957# whether they are being built with a cross-compiler or being built 2958# native. However, it would be better to use other mechanisms to make the 2959# sorts of decisions they want to make on this basis. Please consider 2960# this option to be deprecated. FIXME. 2961if test x${is_cross_compiler} = xyes ; then 2962 target_configargs="--with-cross-host=${host_noncanonical} ${target_configargs}" 2963fi 2964 2965# Default to --enable-multilib. 2966if test x${enable_multilib} = x ; then 2967 target_configargs="--enable-multilib ${target_configargs}" 2968fi 2969 2970# Pass --with-newlib if appropriate. Note that target_configdirs has 2971# changed from the earlier setting of with_newlib. 2972if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " newlib " > /dev/null 2>&1 && test -d ${srcdir}/newlib ; then 2973 target_configargs="--with-newlib ${target_configargs}" 2974fi 2975 2976# Different target subdirs use different values of certain variables 2977# (notably CXX). Worse, multilibs use *lots* of different values. 2978# Worse yet, autoconf 2.5x makes some of these 'precious', meaning that 2979# it doesn't automatically accept command-line overrides of them. 2980# This means it's not safe for target subdirs to share a cache file, 2981# which is disgusting, but there you have it. Hopefully this can be 2982# fixed in future. It's still worthwhile to use a cache file for each 2983# directory. I think. 2984 2985# Pass the appropriate --build, --host, --target and --cache-file arguments. 2986# We need to pass --target, as newer autoconf's requires consistency 2987# for target_alias and gcc doesn't manage it consistently. 2988target_configargs="--cache-file=./config.cache ${target_configargs}" 2989 2990FLAGS_FOR_TARGET= 2991case " $target_configdirs " in 2992 *" newlib "*) 2993 case " $target_configargs " in 2994 *" --with-newlib "*) 2995 case "$target" in 2996 *-cygwin*) 2997 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include' 2998 ;; 2999 esac 3000 3001 # If we're not building GCC, don't discard standard headers. 3002 if test -d ${srcdir}/gcc; then 3003 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -nostdinc' 3004 3005 if test "${build}" != "${host}"; then 3006 # On Canadian crosses, CC_FOR_TARGET will have already been set 3007 # by `configure', so we won't have an opportunity to add -Bgcc/ 3008 # to it. This is right: we don't want to search that directory 3009 # for binaries, but we want the header files in there, so add 3010 # them explicitly. 3011 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/$(HOST_SUBDIR)/gcc/include' 3012 3013 # Someone might think of using the pre-installed headers on 3014 # Canadian crosses, in case the installed compiler is not fully 3015 # compatible with the compiler being built. In this case, it 3016 # would be better to flag an error than risking having 3017 # incompatible object files being constructed. We can't 3018 # guarantee that an error will be flagged, but let's hope the 3019 # compiler will do it, when presented with incompatible header 3020 # files. 3021 fi 3022 fi 3023 3024 case "${target}-${is_cross_compiler}" in 3025 i[[3456789]]86-*-linux*-no) 3026 # Here host == target, so we don't need to build gcc, 3027 # so we don't want to discard standard headers. 3028 FLAGS_FOR_TARGET=`echo " $FLAGS_FOR_TARGET " | sed -e 's/ -nostdinc / /'` 3029 ;; 3030 *) 3031 # If we're building newlib, use its generic headers last, but search 3032 # for any libc-related directories first (so make it the last -B 3033 # switch). 3034 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include' 3035 3036 # If we're building libgloss, find the startup file, simulator library 3037 # and linker script. 3038 case " $target_configdirs " in 3039 *" libgloss "*) 3040 # Look for startup file, simulator library and maybe linker script. 3041 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/libgloss/'"$libgloss_dir" 3042 # Look for libnosys.a in case the target needs it. 3043 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/libgloss/libnosys' 3044 # Most targets have the linker script in the source directory. 3045 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$s/libgloss/'"$libgloss_dir" 3046 ;; 3047 esac 3048 ;; 3049 esac 3050 ;; 3051 esac 3052 ;; 3053esac 3054 3055case "$target" in 3056 x86_64-*mingw* | *-w64-mingw*) 3057 # MinGW-w64 does not use newlib, nor does it use winsup. It may, 3058 # however, use a symlink named 'mingw' in ${prefix} . 3059 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L${prefix}/${target}/lib -L${prefix}/mingw/lib -isystem ${prefix}/${target}/include -isystem ${prefix}/mingw/include' 3060 ;; 3061 *-mingw*) 3062 # MinGW can't be handled as Cygwin above since it does not use newlib. 3063 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup/mingw -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/mingw/include -isystem $$s/winsup/w32api/include' 3064 ;; 3065esac 3066 3067# Allow the user to override the flags for 3068# our build compiler if desired. 3069if test x"${build}" = x"${host}" ; then 3070 CFLAGS_FOR_BUILD=${CFLAGS_FOR_BUILD-${CFLAGS}} 3071 CXXFLAGS_FOR_BUILD=${CXXFLAGS_FOR_BUILD-${CXXFLAGS}} 3072 LDFLAGS_FOR_BUILD=${LDFLAGS_FOR_BUILD-${LDFLAGS}} 3073fi 3074 3075# On Canadian crosses, we'll be searching the right directories for 3076# the previously-installed cross compiler, so don't bother to add 3077# flags for directories within the install tree of the compiler 3078# being built; programs in there won't even run. 3079if test "${build}" = "${host}" && test -d ${srcdir}/gcc; then 3080 # Search for pre-installed headers if nothing else fits. 3081 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include' 3082fi 3083 3084if test "x${use_gnu_ld}" = x && 3085 echo " ${configdirs} " | grep " ld " > /dev/null ; then 3086 # Arrange for us to find uninstalled linker scripts. 3087 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(HOST_SUBDIR)/ld' 3088fi 3089 3090# Search for other target-specific linker scripts and such. 3091case "${target}" in 3092 mep*) 3093 FLAGS_FOR_TARGET="$FLAGS_FOR_TARGET -mlibrary" 3094 ;; 3095esac 3096 3097# Makefile fragments. 3098for frag in host_makefile_frag target_makefile_frag alphaieee_frag ospace_frag; 3099do 3100 eval fragval=\$$frag 3101 if test $fragval != /dev/null; then 3102 eval $frag=${srcdir}/$fragval 3103 fi 3104done 3105AC_SUBST_FILE(host_makefile_frag) 3106AC_SUBST_FILE(target_makefile_frag) 3107AC_SUBST_FILE(alphaieee_frag) 3108AC_SUBST_FILE(ospace_frag) 3109 3110# Miscellanea: directories, flags, etc. 3111AC_SUBST(RPATH_ENVVAR) 3112AC_SUBST(GCC_SHLIB_SUBDIR) 3113AC_SUBST(tooldir) 3114AC_SUBST(build_tooldir) 3115AC_SUBST(CONFIGURE_GDB_TK) 3116AC_SUBST(GDB_TK) 3117AC_SUBST(INSTALL_GDB_TK) 3118 3119# Build module lists & subconfigure args. 3120AC_SUBST(build_configargs) 3121AC_SUBST(build_configdirs) 3122 3123# Host module lists & subconfigure args. 3124AC_SUBST(host_configargs) 3125AC_SUBST(configdirs) 3126AC_SUBST(target_configdirs) 3127 3128# Target module lists & subconfigure args. 3129AC_SUBST(target_configargs) 3130 3131 3132# Build tools. 3133AC_SUBST(AR_FOR_BUILD) 3134AC_SUBST(AS_FOR_BUILD) 3135AC_SUBST(CC_FOR_BUILD) 3136AC_SUBST(CFLAGS_FOR_BUILD) 3137AC_SUBST(CXXFLAGS_FOR_BUILD) 3138AC_SUBST(CXX_FOR_BUILD) 3139AC_SUBST(DLLTOOL_FOR_BUILD) 3140AC_SUBST(GCJ_FOR_BUILD) 3141AC_SUBST(GFORTRAN_FOR_BUILD) 3142AC_SUBST(LDFLAGS_FOR_BUILD) 3143AC_SUBST(LD_FOR_BUILD) 3144AC_SUBST(NM_FOR_BUILD) 3145AC_SUBST(RANLIB_FOR_BUILD) 3146AC_SUBST(WINDMC_FOR_BUILD) 3147AC_SUBST(WINDRES_FOR_BUILD) 3148AC_SUBST(config_shell) 3149 3150# Generate default definitions for YACC, M4, LEX and other programs that run 3151# on the build machine. These are used if the Makefile can't locate these 3152# programs in objdir. 3153MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing 3154 3155AC_CHECK_PROGS([YACC], ['bison -y' byacc yacc], [$MISSING bison -y]) 3156case " $build_configdirs " in 3157 *" bison "*) YACC='$$r/$(BUILD_SUBDIR)/bison/tests/bison -y' ;; 3158 *" byacc "*) YACC='$$r/$(BUILD_SUBDIR)/byacc/byacc' ;; 3159esac 3160 3161AC_CHECK_PROGS([BISON], [bison], [$MISSING bison]) 3162case " $build_configdirs " in 3163 *" bison "*) BISON='$$r/$(BUILD_SUBDIR)/bison/tests/bison' ;; 3164esac 3165 3166AC_CHECK_PROGS([M4], [gm4 gnum4 m4], [$MISSING m4]) 3167case " $build_configdirs " in 3168 *" m4 "*) M4='$$r/$(BUILD_SUBDIR)/m4/m4' ;; 3169esac 3170 3171AC_CHECK_PROGS([LEX], [flex lex], [$MISSING flex]) 3172case " $build_configdirs " in 3173 *" flex "*) LEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;; 3174 *" lex "*) LEX='$$r/$(BUILD_SUBDIR)/lex/lex' ;; 3175esac 3176 3177AC_CHECK_PROGS([FLEX], [flex], [$MISSING flex]) 3178case " $build_configdirs " in 3179 *" flex "*) FLEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;; 3180esac 3181 3182AC_CHECK_PROGS([MAKEINFO], makeinfo, [$MISSING makeinfo]) 3183case " $build_configdirs " in 3184 *" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;; 3185 *) 3186changequote(,) 3187 # For an installed makeinfo, we require it to be from texinfo 4.7 or 3188 # higher, else we use the "missing" dummy. 3189 if ${MAKEINFO} --version \ 3190 | egrep 'texinfo[^0-9]*(4\.([7-9]|[1-9][0-9])|[5-9]|[1-9][0-9])' >/dev/null 2>&1; then 3191 : 3192 else 3193 MAKEINFO="$MISSING makeinfo" 3194 fi 3195 ;; 3196changequote([,]) 3197esac 3198 3199# FIXME: expect and dejagnu may become build tools? 3200 3201AC_CHECK_PROGS(EXPECT, expect, expect) 3202case " $configdirs " in 3203 *" expect "*) 3204 test $host = $build && EXPECT='$$r/$(HOST_SUBDIR)/expect/expect' 3205 ;; 3206esac 3207 3208AC_CHECK_PROGS(RUNTEST, runtest, runtest) 3209case " $configdirs " in 3210 *" dejagnu "*) 3211 test $host = $build && RUNTEST='$$s/$(HOST_SUBDIR)/dejagnu/runtest' 3212 ;; 3213esac 3214 3215 3216# Host tools. 3217NCN_STRICT_CHECK_TOOLS(AR, ar) 3218NCN_STRICT_CHECK_TOOLS(AS, as) 3219NCN_STRICT_CHECK_TOOLS(DLLTOOL, dlltool) 3220NCN_STRICT_CHECK_TOOLS(LD, ld) 3221NCN_STRICT_CHECK_TOOLS(LIPO, lipo) 3222NCN_STRICT_CHECK_TOOLS(NM, nm) 3223NCN_STRICT_CHECK_TOOLS(RANLIB, ranlib, true) 3224NCN_STRICT_CHECK_TOOLS(STRIP, strip, true) 3225NCN_STRICT_CHECK_TOOLS(WINDRES, windres) 3226NCN_STRICT_CHECK_TOOLS(WINDMC, windmc) 3227NCN_STRICT_CHECK_TOOLS(OBJCOPY, objcopy) 3228NCN_STRICT_CHECK_TOOLS(OBJDUMP, objdump) 3229AC_SUBST(CC) 3230AC_SUBST(CXX) 3231AC_SUBST(CFLAGS) 3232AC_SUBST(CXXFLAGS) 3233 3234# Target tools. 3235AC_ARG_WITH([build-time-tools], 3236 [ --with-build-time-tools=PATH 3237 use given path to find target tools during the build], 3238 [case x"$withval" in 3239 x/*) ;; 3240 *) 3241 with_build_time_tools= 3242 AC_MSG_WARN([argument to --with-build-time-tools must be an absolute path]) 3243 ;; 3244 esac], 3245 [with_build_time_tools=]) 3246 3247NCN_STRICT_CHECK_TARGET_TOOLS(CC_FOR_TARGET, cc gcc) 3248NCN_STRICT_CHECK_TARGET_TOOLS(CXX_FOR_TARGET, c++ g++ cxx gxx) 3249NCN_STRICT_CHECK_TARGET_TOOLS(GCC_FOR_TARGET, gcc, ${CC_FOR_TARGET}) 3250NCN_STRICT_CHECK_TARGET_TOOLS(GCJ_FOR_TARGET, gcj) 3251NCN_STRICT_CHECK_TARGET_TOOLS(GFORTRAN_FOR_TARGET, gfortran) 3252 3253ACX_CHECK_INSTALLED_TARGET_TOOL(AR_FOR_TARGET, ar) 3254ACX_CHECK_INSTALLED_TARGET_TOOL(AS_FOR_TARGET, as) 3255ACX_CHECK_INSTALLED_TARGET_TOOL(DLLTOOL_FOR_TARGET, dlltool) 3256ACX_CHECK_INSTALLED_TARGET_TOOL(LD_FOR_TARGET, ld) 3257ACX_CHECK_INSTALLED_TARGET_TOOL(LIPO_FOR_TARGET, lipo) 3258ACX_CHECK_INSTALLED_TARGET_TOOL(NM_FOR_TARGET, nm) 3259ACX_CHECK_INSTALLED_TARGET_TOOL(OBJDUMP_FOR_TARGET, objdump) 3260ACX_CHECK_INSTALLED_TARGET_TOOL(RANLIB_FOR_TARGET, ranlib) 3261ACX_CHECK_INSTALLED_TARGET_TOOL(STRIP_FOR_TARGET, strip) 3262ACX_CHECK_INSTALLED_TARGET_TOOL(WINDRES_FOR_TARGET, windres) 3263ACX_CHECK_INSTALLED_TARGET_TOOL(WINDMC_FOR_TARGET, windmc) 3264 3265RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET" 3266 3267GCC_TARGET_TOOL(ar, AR_FOR_TARGET, AR, [binutils/ar]) 3268GCC_TARGET_TOOL(as, AS_FOR_TARGET, AS, [gas/as-new]) 3269GCC_TARGET_TOOL(cc, CC_FOR_TARGET, CC, [gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/]) 3270GCC_TARGET_TOOL(c++, CXX_FOR_TARGET, CXX, 3271 [gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs], 3272 c++) 3273GCC_TARGET_TOOL(c++ for libstdc++, RAW_CXX_FOR_TARGET, CXX, 3274 [gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs], 3275 c++) 3276GCC_TARGET_TOOL(dlltool, DLLTOOL_FOR_TARGET, DLLTOOL, [binutils/dlltool]) 3277GCC_TARGET_TOOL(gcc, GCC_FOR_TARGET, , [gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/]) 3278GCC_TARGET_TOOL(gcj, GCJ_FOR_TARGET, GCJ, 3279 [gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/], java) 3280GCC_TARGET_TOOL(gfortran, GFORTRAN_FOR_TARGET, GFORTRAN, 3281 [gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/], fortran) 3282GCC_TARGET_TOOL(ld, LD_FOR_TARGET, LD, [ld/ld-new]) 3283GCC_TARGET_TOOL(lipo, LIPO_FOR_TARGET, LIPO) 3284GCC_TARGET_TOOL(nm, NM_FOR_TARGET, NM, [binutils/nm-new]) 3285GCC_TARGET_TOOL(objdump, OBJDUMP_FOR_TARGET, OBJDUMP, [binutils/objdump]) 3286GCC_TARGET_TOOL(ranlib, RANLIB_FOR_TARGET, RANLIB, [binutils/ranlib]) 3287GCC_TARGET_TOOL(strip, STRIP_FOR_TARGET, STRIP, [binutils/strip]) 3288GCC_TARGET_TOOL(windres, WINDRES_FOR_TARGET, WINDRES, [binutils/windres]) 3289GCC_TARGET_TOOL(windmc, WINDMC_FOR_TARGET, WINDMC, [binutils/windmc]) 3290 3291AC_SUBST(FLAGS_FOR_TARGET) 3292AC_SUBST(RAW_CXX_FOR_TARGET) 3293 3294# Certain tools may need extra flags. 3295AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target} 3296RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target} 3297NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target} 3298 3299# When building target libraries, except in a Canadian cross, we use 3300# the same toolchain as the compiler we just built. 3301COMPILER_AS_FOR_TARGET='$(AS_FOR_TARGET)' 3302COMPILER_LD_FOR_TARGET='$(LD_FOR_TARGET)' 3303COMPILER_NM_FOR_TARGET='$(NM_FOR_TARGET)' 3304if test $host = $build; then 3305 case " $configdirs " in 3306 *" gcc "*) 3307 COMPILER_AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/as' 3308 COMPILER_LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/collect-ld' 3309 COMPILER_NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/nm'${extra_nmflags_for_target} 3310 ;; 3311 esac 3312fi 3313 3314AC_SUBST(COMPILER_AS_FOR_TARGET) 3315AC_SUBST(COMPILER_LD_FOR_TARGET) 3316AC_SUBST(COMPILER_NM_FOR_TARGET) 3317 3318AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) 3319AC_ARG_ENABLE(maintainer-mode, 3320[ --enable-maintainer-mode enable make rules and dependencies not useful 3321 (and sometimes confusing) to the casual installer], 3322 USE_MAINTAINER_MODE=$enableval, 3323 USE_MAINTAINER_MODE=no) 3324AC_MSG_RESULT($USE_MAINTAINER_MODE) 3325AC_SUBST(MAINTAINER_MODE_TRUE) 3326AC_SUBST(MAINTAINER_MODE_FALSE) 3327if test "$USE_MAINTAINER_MODE" = yes; then 3328 MAINTAINER_MODE_TRUE= 3329 MAINTAINER_MODE_FALSE='#' 3330else 3331 MAINTAINER_MODE_TRUE='#' 3332 MAINTAINER_MODE_FALSE= 3333fi 3334MAINT=$MAINTAINER_MODE_TRUE 3335AC_SUBST(MAINT)dnl 3336 3337# --------------------- 3338# GCC bootstrap support 3339# --------------------- 3340 3341# Stage specific cflags for build. 3342stage1_cflags="-g" 3343case $build in 3344 vax-*-*) 3345 case ${GCC} in 3346 yes) stage1_cflags="-g -Wa,-J" ;; 3347 *) stage1_cflags="-g -J" ;; 3348 esac ;; 3349esac 3350 3351# This is aimed to mimic bootstrap with a non-GCC compiler to catch problems. 3352if test "$GCC" = yes -a "$ENABLE_BUILD_WITH_CXX" != yes; then 3353 saved_CFLAGS="$CFLAGS" 3354 3355 # Pass -fkeep-inline-functions for stage 1 if the GCC version supports it. 3356 CFLAGS="$CFLAGS -fkeep-inline-functions" 3357 AC_MSG_CHECKING([whether -fkeep-inline-functions is supported]) 3358 AC_TRY_COMPILE([ 3359#if (__GNUC__ < 3) \ 3360 || (__GNUC__ == 3 && (__GNUC_MINOR__ < 3 \ 3361 || (__GNUC_MINOR__ == 3 && __GNUC_PATCHLEVEL__ < 1))) 3362#error http://gcc.gnu.org/PR29382 3363#endif 3364 ],, 3365 [AC_MSG_RESULT([yes]); stage1_cflags="$stage1_cflags -fkeep-inline-functions"], 3366 [AC_MSG_RESULT([no])]) 3367 3368 CFLAGS="$saved_CFLAGS" 3369fi 3370 3371AC_SUBST(stage1_cflags) 3372 3373# Enable --enable-checking in stage1 of the compiler. 3374AC_ARG_ENABLE(stage1-checking, 3375[ --enable-stage1-checking@<:@=all@:>@ choose additional checking for stage1 3376 of the compiler], 3377[stage1_checking=--enable-checking=${enable_stage1_checking}], 3378[if test "x$enable_checking" = xno || test "x$enable_checking" = x; then 3379 stage1_checking=--enable-checking=yes,types 3380else 3381 stage1_checking=--enable-checking=$enable_checking,types 3382fi]) 3383AC_SUBST(stage1_checking) 3384 3385# Enable -Werror in bootstrap stage2 and later. 3386AC_ARG_ENABLE(werror, 3387[ --enable-werror enable -Werror in bootstrap stage2 and later], [], 3388[if test -d ${srcdir}/gcc && test x"`cat $srcdir/gcc/DEV-PHASE`" = xexperimental; then 3389 enable_werror=yes 3390else 3391 enable_werror=no 3392fi]) 3393case ${enable_werror} in 3394 yes) stage2_werror_flag="--enable-werror-always" ;; 3395 *) stage2_werror_flag="" ;; 3396esac 3397AC_SUBST(stage2_werror_flag) 3398 3399# Specify what files to not compare during bootstrap. 3400 3401compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/*" 3402case "$target" in 3403 hppa*64*-*-hpux*) ;; 3404 hppa*-*-hpux*) compare_exclusions="gcc/cc*-checksum\$(objext) | */libgcc/lib2funcs* | gcc/ada/*tools/*" ;; 3405esac 3406case " $configdirs " in 3407*" ppl "*) compare_exclusions="$compare_exclusions | ppl/src/ppl-config.o" ;; 3408esac 3409AC_SUBST(compare_exclusions) 3410 3411AC_CONFIG_FILES([Makefile], 3412 [sed "$extrasub_build" Makefile | 3413 sed "$extrasub_host" | 3414 sed "$extrasub_target" > mf$$ 3415 mv -f mf$$ Makefile], 3416 [extrasub_build="$extrasub_build" 3417 extrasub_host="$extrasub_host" 3418 extrasub_target="$extrasub_target"]) 3419AC_OUTPUT 3420