Standard preamble:
========================================================================
..
.... Set up some character translations and predefined strings. \*(-- will
give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
double quote, and \*(R" will give a right double quote. \*(C+ will
give a nicer C++. Capital omega is used to do unbreakable dashes and
therefore won't be available. \*(C` and \*(C' expand to `' in nroff,
nothing in troff, for use with C<>.
.tr \(*W- . ds -- \(*W- . ds PI pi . if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch . if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch . ds L" "" . ds R" "" . ds C` "" . ds C' "" 'br\} . ds -- \|\(em\| . ds PI \(*p . ds L" `` . ds R" '' . ds C` . ds C' 'br\}
Escape single quotes in literal strings from groff's Unicode transform.
If the F register is >0, we'll generate index entries on stderr for
titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
entries marked with X<> in POD. Of course, you'll have to process the
output yourself in some meaningful fashion.
Avoid warning from groff about undefined register 'F'.
.. .nr rF 0 . if \nF \{\ . de IX . tm Index:\\$1\t\\n%\t"\\$2" .. . if !\nF==2 \{\ . nr % 0 . nr F 2 . \} . \} .\} .rr rF
Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
Fear. Run. Save yourself. No user-serviceable parts.
. \" fudge factors for nroff and troff . ds #H 0 . ds #V .8m . ds #F .3m . ds #[ \f1 . ds #] .\} . ds #H ((1u-(\\\\n(.fu%2u))*.13m) . ds #V .6m . ds #F 0 . ds #[ \& . ds #] \& .\} . \" simple accents for nroff and troff . ds ' \& . ds ` \& . ds ^ \& . ds , \& . ds ~ ~ . ds / .\} . ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" . ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' . ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' . ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' . ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' . ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' .\} . \" troff and (daisy-wheel) nroff accents . \" corrections for vroff . \" for low resolution devices (crt and lpr) \{\ . ds : e . ds 8 ss . ds o a . ds d- d\h'-1'\(ga . ds D- D\h'-1'\(hy . ds th \o'bp' . ds Th \o'LP' . ds ae ae . ds Ae AE .\} ========================================================================
Title "OBJDUMP 1"
way too many mistakes in technical documents.
\fIobjfile... are the object files to be examined. When you specify archives, objdump shows information on each of the member object files.
0
If any of the objfile files are archives, display the archive header information (in a format similar to ls -l). Besides the information you could list with ar tv, objdump -a shows the object file format of each archive member.
0
Specify that the object-code format for the object files is \fIbfdname. This option may not be necessary; objdump can automatically recognize many formats. .Sp For example, .Sp .Vb 1 objdump -b oasys -m vax -h fu.o .Ve .Sp displays summary information from the section headers (-h) of \fIfu.o, which is explicitly identified (-m) as a \s-1VAX\s0 object file in the format produced by Oasys compilers. You can list the formats available with the -i option.
0
Decode (demangle) low-level symbol names into user-level names. Besides removing any initial underscore prepended by the system, this makes \*(C+ function names readable. Different compilers have different mangling styles. The optional demangling style argument can be used to choose an appropriate demangling style for your compiler.
0
Enables or disables a limit on the amount of recursion performed whilst demangling strings. Since the name mangling formats allow for an infinite level of recursion it is possible to create strings whose decoding will exhaust the amount of stack space available on the host machine, triggering a memory fault. The limit tries to prevent this from happening by restricting recursion to 2048 levels of nesting. .Sp The default is for this limit to be enabled, but disabling it may be necessary in order to demangle truly complicated names. Note however that if the recursion limit is disabled then stack exhaustion is possible and any bug reports about such an event will be rejected.
0
Display debugging information. This attempts to parse \s-1STABS\s0 debugging format information stored in the file and print it out using a C like syntax. If no \s-1STABS\s0 debugging was found this option falls back on the -W option to print any \s-1DWARF\s0 information in the file.
0
Like -g, but the information is generated in a format compatible with ctags tool.
0
Display the assembler mnemonics for the machine instructions from the input file. This option only disassembles those sections which are expected to contain instructions. If the optional symbol argument is given, then display the assembler mnemonics starting at \fIsymbol. If symbol is a function name then disassembly will stop at the end of the function, otherwise it will stop when the next symbol is encountered. If there are no matches for symbol then nothing will be displayed. .Sp Note if the --dwarf=follow-links option is enabled then any symbol tables in linked debug info files will be read in and used when disassembling.
0
Like -d, but disassemble the contents of all sections, not just those expected to contain instructions. .Sp This option also has a subtle effect on the disassembly of instructions in code sections. When option -d is in effect objdump will assume that any symbols present in a code section occur on the boundary between instructions and it will refuse to disassemble across such a boundary. When option -D is in effect however this assumption is supressed. This means that it is possible for the output of -d and -D to differ if, for example, data is stored in code sections. .Sp If the target is an \s-1ARM\s0 architecture this switch also has the effect of forcing the disassembler to decode pieces of data found in code sections as if they were instructions. .Sp Note if the --dwarf=follow-links option is enabled then any symbol tables in linked debug info files will be read in and used when disassembling.
0
Specify the endianness of the object files. This only affects disassembly. This can be useful when disassembling a file format which does not describe endianness information, such as S-records.
0
Display summary information from the overall header of each of the objfile files.
0
When disassembling sections, whenever a symbol is displayed, also display the file offset of the region of data that is about to be dumped. If zeroes are being skipped, then when disassembly resumes, tell the user how many zeroes were skipped and the file offset of the location from where the disassembly resumes. When dumping sections, display the file offset of the location from where the dump starts.
0
Display summary information from the section headers of the object file. .Sp File segments may be relocated to nonstandard addresses, for example by using the -Ttext, -Tdata, or -Tbss options to \fBld. However, some object file formats, such as a.out, do not store the starting address of the file segments. In those situations, although ld relocates the sections correctly, using objdump \-h to list the file section headers cannot show the correct addresses. Instead, it shows the usual addresses, which are implicit for the target. .Sp Note, in some cases it is possible for a section to have both the \s-1READONLY\s0 and the \s-1NOREAD\s0 attributes set. In such cases the \s-1NOREAD\s0 attribute takes precedence, but objdump will report both since the exact setting of the flag bits might be important.
0
Print a summary of the options to objdump and exit.
0
Display a list showing all architectures and object formats available for specification with -b or -m.
0
Display information only for section name.
0
Display the contents of non-debug sections found in separate debuginfo files that are linked to the main file. This option automatically implies the -WK option, and only sections requested by other command line options will be displayed.
0
Label the display (using debugging information) with the filename and source line numbers corresponding to the object code or relocs shown. Only useful with -d, -D, or -r.
0
Specify the architecture to use when disassembling object files. This can be useful when disassembling object files which do not describe architecture information, such as S-records. You can list the available architectures with the -i option. .Sp If the target is an \s-1ARM\s0 architecture then this switch has an additional effect. It restricts the disassembly to only those instructions supported by the architecture specified by machine. If it is necessary to use this switch because the input file does not contain any architecture information, but it is also desired to disassemble all the instructions use -marm.
0
Pass target specific information to the disassembler. Only supported on some targets. If it is necessary to specify more than one disassembler option then multiple -M options can be used or can be placed together into a comma separated list. .Sp For \s-1ARC,\s0 dsp controls the printing of \s-1DSP\s0 instructions, \fBspfp selects the printing of \s-1FPX\s0 single precision \s-1FP\s0 instructions, dpfp selects the printing of \s-1FPX\s0 double precision \s-1FP\s0 instructions, quarkse_em selects the printing of special QuarkSE-EM instructions, fpuda selects the printing of double precision assist instructions, fpus selects the printing of \s-1FPU\s0 single precision \s-1FP\s0 instructions, while fpud selects the printing of \s-1FPU\s0 double precision \s-1FP\s0 instructions. Additionally, one can choose to have all the immediates printed in hexadecimal using hex. By default, the short immediates are printed using the decimal representation, while the long immediate values are printed as hexadecimal. .Sp \fBcpu=... allows one to enforce a particular \s-1ISA\s0 when disassembling instructions, overriding the -m value or whatever is in the \s-1ELF\s0 file. This might be useful to select \s-1ARC EM\s0 or \s-1HS ISA,\s0 because architecture is same for those and disassembler relies on private \s-1ELF\s0 header data to decide if code is for \s-1EM\s0 or \s-1HS.\s0 This option might be specified multiple times - only the latest value will be used. Valid values are same as for the assembler \fB-mcpu=... option. .Sp If the target is an \s-1ARM\s0 architecture then this switch can be used to select which register name set is used during disassembler. Specifying \fB-M reg-names-std (the default) will select the register names as used in \s-1ARM\s0's instruction set documentation, but with register 13 called 'sp', register 14 called 'lr' and register 15 called 'pc'. Specifying \fB-M reg-names-apcs will select the name set used by the \s-1ARM\s0 Procedure Call Standard, whilst specifying -M reg-names-raw will just use r followed by the register number. .Sp There are also two variants on the \s-1APCS\s0 register naming scheme enabled by -M reg-names-atpcs and -M reg-names-special-atpcs which use the ARM/Thumb Procedure Call Standard naming conventions. (Either with the normal register names or the special register names). .Sp This option can also be used for \s-1ARM\s0 architectures to force the disassembler to interpret all instructions as Thumb instructions by using the switch --disassembler-options=force-thumb. This can be useful when attempting to disassemble thumb code produced by other compilers. .Sp For AArch64 targets this switch can be used to set whether instructions are disassembled as the most general instruction using the -M no-aliases option or whether instruction notes should be generated as comments in the disasssembly using -M notes. .Sp For the x86, some of the options duplicate functions of the -m switch, but allow finer grained control.
Item "x86-64"
0 Item "i386" Item "i8086"
Select disassembly for the given architecture. Item "intel"
0 Item "att"
Select between intel syntax mode and \s-1AT&T\s0 syntax mode. Item "amd64"
0 Item "intel64"
Select between \s-1AMD64 ISA\s0 and Intel64 \s-1ISA.\s0 Item "intel-mnemonic"
0 Item "att-mnemonic"
Select between intel mnemonic mode and \s-1AT&T\s0 mnemonic mode. Note: \*(C`intel-mnemonic\*(C' implies \*(C`intel\*(C' and \f(CW\*(C`att-mnemonic\*(C' implies \*(C`att\*(C'. Item "addr64"
0 Item "addr32" Item "addr16" Item "data32" Item "data16"
Specify the default address size and operand size. These five options will be overridden if \*(C`x86-64\*(C', \*(C`i386\*(C' or \*(C`i8086\*(C' appear later in the option string. Item "suffix" When in \s-1AT&T\s0 mode and also for a limited set of instructions when in Intel mode, instructs the disassembler to print a mnemonic suffix even when the suffix could be inferred by the operands or, for certain instructions, the execution mode's defaults.
.Sp For PowerPC, the -M argument raw selects disasssembly of hardware insns rather than aliases. For example, you will see \*(C`rlwinm\*(C' rather than \*(C`clrlwi\*(C', and \*(C`addi\*(C' rather than \*(C`li\*(C'. All of the -m arguments for \fBgas that select a \s-1CPU\s0 are supported. These are: \fB403, 405, 440, 464, 476, \fB601, 603, 604, 620, 7400, \fB7410, 7450, 7455, 750cl, \fB821, 850, 860, a2, booke, \fBbooke32, cell, com, e200z4, \fBe300, e500, e500mc, e500mc64, \fBe500x2, e5500, e6500, efs, \fBpower4, power5, power6, power7, \fBpower8, power9, power10, ppc, \fBppc32, ppc64, ppc64bridge, ppcps, \fBpwr, pwr2, pwr4, pwr5, pwr5x, \fBpwr6, pwr7, pwr8, pwr9, pwr10, \fBpwrx, titan, and vle. \fB32 and 64 modify the default or a prior \s-1CPU\s0 selection, disabling and enabling 64-bit insns respectively. In addition, altivec, any, htm, vsx, and spe add capabilities to a previous or later \s-1CPU\s0 selection. any will disassemble any opcode known to binutils, but in cases where an opcode has two different meanings or different arguments, you may not see the disassembly you expect. If you disassemble without giving a \s-1CPU\s0 selection, a default will be chosen from information gleaned by \s-1BFD\s0 from the object files headers, but the result again may not be as you expect. .Sp For \s-1MIPS,\s0 this option controls the printing of instruction mnemonic names and register names in disassembled instructions. Multiple selections from the following may be specified as a comma separated string, and invalid options are ignored: Item "no-aliases" Print the 'raw' instruction mnemonic instead of some pseudo instruction mnemonic. I.e., print 'daddu' or 'or' instead of 'move', 'sll' instead of 'nop', etc. Item "msa" Disassemble \s-1MSA\s0 instructions. Item "virt" Disassemble the virtualization \s-1ASE\s0 instructions. Item "xpa" Disassemble the eXtended Physical Address (\s-1XPA\s0) \s-1ASE\s0 instructions. Item "gpr-names=ABI" Print \s-1GPR\s0 (general-purpose register) names as appropriate for the specified \s-1ABI.\s0 By default, \s-1GPR\s0 names are selected according to the \s-1ABI\s0 of the binary being disassembled. Item "fpr-names=ABI" Print \s-1FPR\s0 (floating-point register) names as appropriate for the specified \s-1ABI.\s0 By default, \s-1FPR\s0 numbers are printed rather than names. Item "cp0-names=ARCH" Print \s-1CP0\s0 (system control coprocessor; coprocessor 0) register names as appropriate for the \s-1CPU\s0 or architecture specified by \fI\s-1ARCH\s0. By default, \s-1CP0\s0 register names are selected according to the architecture and \s-1CPU\s0 of the binary being disassembled. Item "hwr-names=ARCH" Print \s-1HWR\s0 (hardware register, used by the \*(C`rdhwr\*(C' instruction) names as appropriate for the \s-1CPU\s0 or architecture specified by \fI\s-1ARCH\s0. By default, \s-1HWR\s0 names are selected according to the architecture and \s-1CPU\s0 of the binary being disassembled. Item "reg-names=ABI" Print \s-1GPR\s0 and \s-1FPR\s0 names as appropriate for the selected \s-1ABI.\s0 Item "reg-names=ARCH" Print CPU-specific register names (\s-1CP0\s0 register and \s-1HWR\s0 names) as appropriate for the selected \s-1CPU\s0 or architecture.
.Sp For any of the options listed above, \s-1ABI\s0 or \fI\s-1ARCH\s0 may be specified as numeric to have numbers printed rather than names, for the selected types of registers. You can list the available values of \s-1ABI\s0 and \s-1ARCH\s0 using the --help option. .Sp For \s-1VAX,\s0 you can specify function entry addresses with -M entry:0xf00ba. You can use this multiple times to properly disassemble \s-1VAX\s0 binary files that don't contain symbol tables (like \s-1ROM\s0 dumps). In these cases, the function entry mask would otherwise be decoded as \s-1VAX\s0 instructions, which would probably lead the rest of the function being wrongly disassembled.
0
Print information that is specific to the object file format. The exact information printed depends upon the object file format. For some object file formats, no additional information is printed.
0
Print information that is specific to the object file format. The argument options is a comma separated list that depends on the format (the lists of options is displayed with the help). .Sp For \s-1XCOFF,\s0 the available options are:
Item "header"
0 Item "aout" Item "sections" Item "syms" Item "relocs" Item "lineno," Item "loader" Item "except" Item "typchk" Item "traceback" Item "toc" Item "ldinfo"
.Sp Not all object formats support this option. In particular the \s-1ELF\s0 format does not use it.
0
Print the relocation entries of the file. If used with -d or \fB-D, the relocations are printed interspersed with the disassembly.
0
Print the dynamic relocation entries of the file. This is only meaningful for dynamic objects, such as certain types of shared libraries. As for -r, if used with -d or \fB-D, the relocations are printed interspersed with the disassembly.
0
Display the full contents of any sections requested. By default all non-empty sections are displayed.
0
Display source code intermixed with disassembly, if possible. Implies \fB-d.
0
Displays the contents of the \s-1DWARF\s0 debug sections in the file, if any are present. Compressed debug sections are automatically decompressed (temporarily) before they are displayed. If one or more of the optional letters or words follows the switch then only those type(s) of data will be dumped. The letters and words refer to the following information:
Item "a"
0 Item "=abbrev"
Displays the contents of the .debug_abbrev section. Item "A"
0 Item "=addr"
Displays the contents of the .debug_addr section. Item "c"
0 Item "=cu_index"
Displays the contents of the .debug_cu_index and/or \fB.debug_tu_index sections. Item "f"
0 Item "=frames"
Display the raw contents of a .debug_frame section. Item "F"
0 Item "=frames-interp"
Display the interpreted contents of a .debug_frame section. Item "g"
0 Item "=gdb_index"
Displays the contents of the .gdb_index and/or \fB.debug_names sections. Item "i"
0 Item "=info"
Displays the contents of the .debug_info section. Note: the output from this option can also be restricted by the use of the \fB--dwarf-depth and --dwarf-start options. Item "k"
0 Item "=links"
Displays the contents of the .gnu_debuglink, \fB.gnu_debugaltlink and .debug_sup sections, if any of them are present. Also displays any links to separate dwarf object files (dwo), if they are specified by the DW_AT_GNU_dwo_name or DW_AT_dwo_name attributes in the .debug_info section. Item "K"
0 Item "=follow-links"
Display the contents of any selected debug sections that are found in linked, separate debug info file(s). This can result in multiple versions of the same debug section being displayed if it exists in more than one file. .Sp In addition, when displaying \s-1DWARF\s0 attributes, if a form is found that references the separate debug info file, then the referenced contents will also be displayed. .Sp Note - in some distributions this option is enabled by default. It can be disabled via the N debug option. The default can be chosen when configuring the binutils via the \fB--enable-follow-debug-links=yes or \fB--enable-follow-debug-links=no options. If these are not used then the default is to enable the following of debug links. .Sp Note - if support for the debuginfod protocol was enabled when the binutils were built then this option will also include an attempt to contact any debuginfod servers mentioned in the \s-1DEBUGINFOD_URLS\s0 environment variable. This could take some time to resolve. This behaviour can be disabled via the =do-not-use-debuginfod debug option. Item "N"
0 Item "=no-follow-links"
Disables the following of links to separate debug info files. Item "D"
0 Item "=use-debuginfod"
Enables contacting debuginfod servers if there is a need to follow debug links. This is the default behaviour. Item "E"
0 Item "=do-not-use-debuginfod"
Disables contacting debuginfod servers when there is a need to follow debug links. Item "l"
0 Item "=rawline"
Displays the contents of the .debug_line section in a raw format. Item "L"
0 Item "=decodedline"
Displays the interpreted contents of the .debug_line section. Item "m"
0 Item "=macro"
Displays the contents of the .debug_macro and/or \fB.debug_macinfo sections. Item "o"
0 Item "=loc"
Displays the contents of the .debug_loc and/or \fB.debug_loclists sections. Item "O"
0 Item "=str-offsets"
Displays the contents of the .debug_str_offsets section. Item "p"
0 Item "=pubnames"
Displays the contents of the .debug_pubnames and/or \fB.debug_gnu_pubnames sections. Item "r"
0 Item "=aranges"
Displays the contents of the .debug_aranges section. Item "R"
0 Item "=Ranges"
Displays the contents of the .debug_ranges and/or \fB.debug_rnglists sections. Item "s"
0 Item "=str"
Displays the contents of the .debug_str, .debug_line_str and/or .debug_str_offsets sections. Item "t"
0 Item "=pubtype"
Displays the contents of the .debug_pubtypes and/or \fB.debug_gnu_pubtypes sections. Item "T"
0 Item "=trace_aranges"
Displays the contents of the .trace_aranges section. Item "u"
0 Item "=trace_abbrev"
Displays the contents of the .trace_abbrev section. Item "U"
0 Item "=trace_info"
Displays the contents of the .trace_info section.
.Sp Note: displaying the contents of .debug_static_funcs, \fB.debug_static_vars and debug_weaknames sections is not currently supported.
0
Display the full contents of any sections requested. Display the contents of the .stab and .stab.index and .stab.excl sections from an \s-1ELF\s0 file. This is only useful on systems (such as Solaris 2.0) in which \f(CW\*(C`.stab\*(C' debugging symbol-table entries are carried in an \s-1ELF\s0 section. In most other file formats, debugging symbol-table entries are interleaved with linkage symbols, and are visible in the --syms output.
0
Print the symbol table entries of the file. This is similar to the information provided by the nm program, although the display format is different. The format of the output depends upon the format of the file being dumped, but there are two main types. One looks like this: .Sp .Vb 2 [ 4](sec 3)(fl 0x00)(ty 0)(scl 3) (nx 1) 0x00000000 .bss [ 6](sec 1)(fl 0x00)(ty 0)(scl 2) (nx 0) 0x00000000 fred .Ve .Sp where the number inside the square brackets is the number of the entry in the symbol table, the sec number is the section number, the \fIfl value are the symbol's flag bits, the ty number is the symbol's type, the scl number is the symbol's storage class and the nx value is the number of auxiliary entries associated with the symbol. The last two fields are the symbol's value and its name. .Sp The other common output format, usually seen with \s-1ELF\s0 based files, looks like this: .Sp .Vb 2 00000000 l d .bss 00000000 .bss 00000000 g .text 00000000 fred .Ve .Sp Here the first number is the symbol's value (sometimes referred to as its address). The next field is actually a set of characters and spaces indicating the flag bits that are set on the symbol. These characters are described below. Next is the section with which the symbol is associated or *ABS* if the section is absolute (ie not connected with any section), or *UND* if the section is referenced in the file being dumped, but not defined there. .Sp After the section name comes another field, a number, which for common symbols is the alignment and for other symbol is the size. Finally the symbol's name is displayed. .Sp The flag characters are divided into 7 groups as follows:
Item "l"
0 Item "g" Item "u" Item "!"
The symbol is a local (l), global (g), unique global (u), neither global nor local (a space) or both global and local (!). A symbol can be neither local or global for a variety of reasons, e.g., because it is used for debugging, but it is probably an indication of a bug if it is ever both local and global. Unique global symbols are a \s-1GNU\s0 extension to the standard set of \s-1ELF\s0 symbol bindings. For such a symbol the dynamic linker will make sure that in the entire process there is just one symbol with this name and type in use. Item "w" The symbol is weak (w) or strong (a space). Item "C" The symbol denotes a constructor (C) or an ordinary symbol (a space). Item "W" The symbol is a warning (W) or a normal symbol (a space). A warning symbol's name is a message to be displayed if the symbol following the warning symbol is ever referenced. Item "I"
0 Item "i"
The symbol is an indirect reference to another symbol (I), a function to be evaluated during reloc processing (i) or a normal symbol (a space). Item "d"
0 Item "D"
The symbol is a debugging symbol (d) or a dynamic symbol (D) or a normal symbol (a space). Item "F"
0 Item "f" Item "O"
The symbol is the name of a function (F) or a file (f) or an object (O) or just a normal symbol (a space).
0
Print the dynamic symbol table entries of the file. This is only meaningful for dynamic objects, such as certain types of shared libraries. This is similar to the information provided by the nm program when given the -D (--dynamic) option. .Sp The output format is similar to that produced by the --syms option, except that an extra field is inserted before the symbol's name, giving the version information associated with the symbol. If the version is the default version to be used when resolving unversioned references to the symbol then it's displayed as is, otherwise it's put into parentheses.
0
Controls the display of \s-1UTF-8\s0 encoded multibyte characters in strings. The default (--unicode=default) is to give them no special treatment. The --unicode=locale option displays the sequence in the current locale, which may or may not support them. The options \fB--unicode=hex and --unicode=invalid display them as hex byte sequences enclosed by either angle brackets or curly braces. .Sp The --unicode=escape option displays them as escape sequences (\euxxxx) and the --unicode=highlight option displays them as escape sequences highlighted in red (if supported by the output device). The colouring is intended to draw attention to the presence of unicode sequences where they might not be expected.
0
Print the version number of objdump and exit.
0
Display all available header information, including the symbol table and relocation entries. Using -x is equivalent to specifying all of \fB-a -f -h -p -r -t.
0
Format some lines for output devices that have more than 80 columns. Also do not truncate symbol names when they are displayed.
0
Normally the disassembly output will skip blocks of zeroes. This option directs the disassembler to disassemble those blocks, just like any other data.
Permission is granted to copy, distribute and/or modify this document under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, with no Front-Cover Texts, and with no Back-Cover Texts. A copy of the license is included in the section entitled \*(L"\s-1GNU\s0 Free Documentation License\*(R".