bootptab revision 1.1 
1# /etc/bootptab: database for bootp server (/etc/bootpd)
2# Last update Mon 11/7/88 18:03
3# Blank lines and lines beginning with '#' are ignored.
4#
5# Legend:
6#
7#	first field -- hostname
8#			(may be full domain name and probably should be)
9#
10#	hd -- home directory
11#	bf -- bootfile
12#	cs -- cookie servers
13#	df -- dumpfile
14#	dn -- domain name
15#	ds -- domain name servers
16#	gw -- gateways
17#	ha -- hardware address
18#	ht -- hardware type
19#	im -- impress servers
20#	ip -- host IP address
21#	lg -- log servers
22#	lp -- LPR servers
23#	ns -- IEN-116 name servers
24#	rl -- resource location protocol servers
25#	rp -- root path
26#	sm -- subnet mask
27#	sw -- swap server
28#	tc -- template host (points to similar host entry)
29#	to -- time offset (seconds)
30#	ts -- time servers
31
32#
33# Be careful about including backslashes where they're needed.  Weird (bad)
34# things can happen when a backslash is omitted where one is intended.
35#
36
37
38# First, we define a global entry which specifies the stuff every host uses.
39
40global.dummy:\
41        :sm=255.255.255.0:\
42        :hd=/home/nfsclient:bf=null:\
43        :ds=128.32.149.141:\
44        :ns=0x80020b4d 0x80020ffd:\
45        :ts=0x80020b4d 0x80020ffd:\
46        :to=18000:
47
48# Next, we can define different master entries for each subnet. . .
49
50#subnet13.dummy:\
51#	:tc=global.dummy:gw=128.2.13.1:
52#
53#
54# We should be able to use as many levels of indirection as desired.  Use
55# your imagination. . .
56#
57
58
59# Individual entries (could also have different servers for some/all of these
60# hosts, but we don't really use this feature at CMU):
61
62#carnegie:tc=subnet13.dummy:ht=ieee802:ha=7FF8100000AF:ip=128.2.11.1:
63#baldwin:tc=subnet19.dummy:ht=ethernet:ha=0800200159C3:ip=128.2.11.10:
64
65
66#example nfs diskless client
67
68#timesink:hd=/home/nfsclient/timesink:\
69#	tc=subnet149.dummy:ht=ethernet:ha=0800200168A7:ip=128.32.149.20:
70