xfer revision 1.3.4.1
1Installation is really only supported from the local Macintosh 2hard drive or from an AppleShare volume. This means that you'll 3need at least enough room for the largest file that you will have 4to install. This is the 7.2M base12 file. There has been talk 5of allowing an install from split files. If you have the time, 6desire, and knowledge, please feel free to add that functionality. 7 8If the install is being done from an AppleShare-mounted volume, 9the install utility must be in the same folder as the data files. 10 11Each distribution file is in "raw" UN*X format, and must be 12downloaded in binary mode. Common web browsers are not suitable 13for this task; FTP clients such as Fetch and Anarchie work fine, 14but be sure to specify a binary file transfer. 15 16You will also need to collect the MacOS tools: 17 Mkfs, 18 Installer, and 19 NetBSD/mac68k Booter. 20 21These three are compacted and in binhex form as mkfs.cpt.hqx, 22Installer1.1.sea.hqx, and Booter1.9.4.sit.bin, respectively. 23Extract them as you would any other Macintosh applications. If 24you need them, the sources are in the "src" subdirectory. 25