1#!/bin/sh
2#
3# Copyright (c) 2006 - 2011 Kungliga Tekniska H��gskolan
4# (Royal Institute of Technology, Stockholm, Sweden). 
5# All rights reserved. 
6#
7# Redistribution and use in source and binary forms, with or without 
8# modification, are permitted provided that the following conditions 
9# are met: 
10#
11# 1. Redistributions of source code must retain the above copyright 
12#    notice, this list of conditions and the following disclaimer. 
13#
14# 2. Redistributions in binary form must reproduce the above copyright 
15#    notice, this list of conditions and the following disclaimer in the 
16#    documentation and/or other materials provided with the distribution. 
17#
18# 3. Neither the name of the Institute nor the names of its contributors 
19#    may be used to endorse or promote products derived from this software 
20#    without specific prior written permission. 
21#
22# THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND 
23# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
24# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
25# ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE 
26# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
27# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 
28# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
29# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 
30# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 
31# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 
32# SUCH DAMAGE. 
33
34top_builddir="@top_builddir@"
35env_setup="@env_setup@"
36objdir="@objdir@"
37
38. ${env_setup}
39
40KRB5_CONFIG="${1-${objdir}/krb5.conf}"
41export KRB5_CONFIG
42
43testfailed="echo test failed; cat messages.log; exit 1"
44
45# If there is no useful db support compiled in, disable test
46${have_db} || exit 77
47
48R=TEST.H5L.SE
49
50port=@port@
51
52kadmin="${kadmin} -l -r $R"
53kdc="${kdc} --addresses=localhost -P $port"
54
55server=host/datan.test.h5l.se
56cache="FILE:${objdir}/cache.krb5"
57acache="FILE:${objdir}/acache.krb5"
58
59kinit="${kinit} -c $cache ${afs_no_afslog}"
60akinit="${kinit} -c $acache ${afs_no_afslog}"
61klist="${klist} -c $cache"
62aklist="${klist} -c $acache"
63kgetcred="${kgetcred} -c $cache"
64kdestroy="${kdestroy} -c $cache ${afs_no_unlog}"
65
66rm -f ${keytabfile}
67rm -f current-db*
68rm -f out-*
69rm -f mkey.file*
70
71> messages.log
72
73echo Creating database
74${kadmin} \
75    init \
76    --realm-max-ticket-life=1day \
77    --realm-max-renewable-life=1month \
78    ${R} || exit 1
79
80${kadmin} add -p foo --use-defaults foo@${R} || exit 1
81${kadmin} add -p foo --use-defaults ${server}@${R} || exit 1
82
83echo "Doing database check"
84${kadmin} check ${R} || exit 1
85
86echo foo > ${objdir}/foopassword
87echo bar > ${objdir}/barpassword
88
89echo Starting kdc ; > messages.log
90env MallocStackLogging=1 MallocStackLoggingNoCompact=1 MallocErrorAbort=1 MallocLogFile=${objdir}/malloc-log \
91${kdc} --detach --testing || { echo "kdc failed to start"; exit 1; }
92kdcpid=`getpid kdc`
93
94trap "kill -9 ${kdcpid}; echo signal killing kdc; cat messages.log; exit 1;" EXIT
95
96ec=0
97
98#
99# Check armor ticket
100#
101
102echo "Getting client initial tickets"; > messages.log
103${kinit} --password-file=${objdir}/foopassword foo@$R || \
104	{ ec=1 ; eval "${testfailed}"; }
105echo "Checking for FAST avail"
106${klist} --hidden | grep fast_avail > /dev/null || { exit 1; }
107echo "Getting tickets"; > messages.log
108${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
109echo "Listing tickets"; > messages.log
110${klist} > /dev/null || { ec=1 ; eval "${testfailed}"; }
111${kdestroy}
112
113echo "Acquire host ticket to be used as an ARMOR ticket"; > messages.log
114${akinit} --password-file=${objdir}/foopassword ${server}@${R} >/dev/null|| { exit 1; }
115echo "Checking for FAST avail (in the FAST armor cache)"; > messages.log
116${aklist} --hidden | grep fast_avail > /dev/null || { exit 1; }
117
118#
119# Client tests
120#
121
122echo "Getting client initial tickets with FAST armor ticket"; > messages.log
123${kinit} --fast-armor-cache=${acache} \
124   --password-file=${objdir}/foopassword foo@$R || \
125	{ ec=1 ; eval "${testfailed}"; }
126
127echo "Getting client initial tickets with FAST armor ticket [failure]"; > messages.log
128${kinit} --fast-armor-cache=${acache} \
129   --password-file=${objdir}/barpassword foo@$R 2>/dev/null && \
130	{ ec=1 ; eval "${testfailed}"; }
131
132echo "Checking for FAST avail (in the FAST acquired cache)"; > messages.log
133${klist} --hidden | grep fast_avail > /dev/null || { exit 1; }
134
135echo "Getting service ticket"
136${kgetcred} ${server}@${R} || { exit 1; }
137${kdestroy}
138
139#
140# Use MIT client tools
141#
142
143mit=/usr/local/mitkerberos/bin
144
145if [ -f ${mit}/kinit ] ; then
146   echo "Running MIT FAST tests"
147
148    kinitpty=${objdir}/foopassword.rkpty
149cat > ${kinitpty} <<EOF
150expect Password
151password foo\n
152EOF
153
154   echo "Acquire host ticket"; > messages.log
155   ${rkpty} ${kinitpty} ${mit}/kinit -c ${acache} ${server}@${R} >/dev/null|| { exit 1; }
156   (${aklist} | grep ${server} > /dev/null ) || { exit 1; }
157
158   echo "Checking for FAST avail"; > messages.log
159   ${aklist} --hidden | grep fast_avail > /dev/null || { exit 1; }
160
161   echo "Using plain to get a initial ticket"; > messages.log
162   ${rkpty} ${kinitpty} ${mit}/kinit -c ${cache} foo@${R} >/dev/null|| { exit 1; }
163   (${klist} | grep foo > /dev/null ) || { exit 1; }
164
165   echo "Using FAST to get a initial ticket"; > messages.log
166   ${rkpty} ${kinitpty} ${mit}/kinit -c ${cache} -T ${acache} foo@${R} >/dev/null || { exit 1; }
167   (${klist} | grep foo > /dev/null ) || { exit 1; }
168
169   echo "Checking for FAST avail"; > messages.log
170   ${klist} --hidden | grep fast_avail > /dev/null || { exit 1; }
171
172   echo "Getting service ticket"; > messages.log
173   ${mit}/kvno -c ${cache} ${server}@${R} || { exit 1; }
174
175fi
176
177
178echo "killing kdc (${kdcpid})"
179sh ${leaks_kill} kdc $kdcpid || exit 1
180
181trap "" EXIT
182
183exit $ec
184