check-digest.in revision 1.1.1.1
1#!/bin/sh 2# 3# Copyright (c) 2006 - 2007 Kungliga Tekniska H��gskolan 4# (Royal Institute of Technology, Stockholm, Sweden). 5# All rights reserved. 6# 7# Redistribution and use in source and binary forms, with or without 8# modification, are permitted provided that the following conditions 9# are met: 10# 11# 1. Redistributions of source code must retain the above copyright 12# notice, this list of conditions and the following disclaimer. 13# 14# 2. Redistributions in binary form must reproduce the above copyright 15# notice, this list of conditions and the following disclaimer in the 16# documentation and/or other materials provided with the distribution. 17# 18# 3. Neither the name of the Institute nor the names of its contributors 19# may be used to endorse or promote products derived from this software 20# without specific prior written permission. 21# 22# THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND 23# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25# ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE 26# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 27# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 28# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 29# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 30# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 31# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 32# SUCH DAMAGE. 33 34top_builddir="@top_builddir@" 35env_setup="@env_setup@" 36objdir="@objdir@" 37srcdir="@srcdir@" 38 39testfailed="echo test failed; cat messages.log; exit 1" 40 41. ${env_setup} 42 43# If there is no useful db support compile in, disable test 44${have_db} || exit 77 45 46R=TEST.H5L.SE 47 48port=@port@ 49 50kadmin="${kadmin} -l -r $R" 51kdc="${kdc} --addresses=localhost -P $port" 52 53server=host/datan.test.h5l.se 54cache="FILE:${objdir}/cache.krb5" 55ocache="FILE:${objdir}/ocache.krb5" 56keytabfile=${objdir}/server.keytab 57keytab="FILE:${keytabfile}" 58 59kinit="${kinit} -c $cache ${afs_no_afslog}" 60klist="${klist} -c $cache" 61kdigest="${kdigest} --ccache=$cache" 62 63username=foo 64userpassword=digestpassword 65 66password=foobarbaz 67 68KRB5_CONFIG="${objdir}/krb5.conf" 69export KRB5_CONFIG 70 71rm -f ${keytabfile} 72rm -f current-db* 73rm -f out-* 74rm -f mkey.file* 75 76> messages.log 77 78echo Creating database 79${kadmin} \ 80 init \ 81 --realm-max-ticket-life=1day \ 82 --realm-max-renewable-life=1month \ 83 ${R} || exit 1 84 85${kadmin} add -p $userpassword --use-defaults ${username}@${R} || exit 1 86${kadmin} add -p $password --use-defaults ${server}@${R} || exit 1 87${kadmin} add -p kaka --use-defaults digest/${R}@${R} || exit 1 88${kadmin} modify --attributes=+allow-digest ${server}@${R} || exit 1 89${kadmin} ext -k ${keytab} ${server}@${R} || exit 1 90 91echo "Doing database check" 92${kadmin} check ${R} || exit 1 93 94echo $password > ${objdir}/foopassword 95 96echo "Starting kdc" 97env ${HEIM_MALLOC_DEBUG} ${kdc} & 98kdcpid=$! 99 100sh ${wait_kdc} 101if [ "$?" != 0 ] ; then 102 kill -9 ${kdcpid} 103 exit 1 104fi 105 106trap "kill -9 ${kdcpid}; echo signal killing kdc; cat messages.log; exit 1;" EXIT 107 108exitcode=0 109 110echo "Getting digest server tickets" 111${kinit} --password-file=${objdir}/foopassword ${server}@$R || exitcode=1 112${kdigest} digest-server-init \ 113 --kerberos-realm=${R} \ 114 --type=CHAP > /dev/null || exitcode=1 115 116echo "Trying NTLM" 117 118NTLM_ACCEPTOR_CCACHE="$cache" 119export NTLM_ACCEPTOR_CCACHE 120 121echo "Trying server-init" 122${kdigest} ntlm-server-init \ 123 --kerberos-realm=${R} \ 124 > sdigest-init || exitcode=1 125 126echo "test_ntlm" 127${test_ntlm} || { echo "test_ntlm failed"; exit 1; } 128 129NTLM_USER_FILE="${srcdir}/ntlm-user-file.txt" 130export NTLM_USER_FILE 131 132echo "test_context --mech-type=ntlm" 133${test_context} --mech-type=ntlm \ 134 --name-type=hostbased-service datan@TEST || \ 135 { echo "test_context 1 failed"; exit 1; } 136 137${test_context} --mech-type=ntlm \ 138 --name-type=hostbased-service datan@host.TEST || \ 139 { echo "test_context 2 failed"; exit 1; } 140 141${test_context} --mech-type=ntlm \ 142 --name-type=hostbased-service datan@host.test.domain2 || \ 143 { echo "test_context 3 failed"; exit 1; } 144 145${test_context} --mech-type=ntlm \ 146 --name-type=hostbased-service datan@host.foo 2>/dev/null && \ 147 { echo "test_context 4 failed"; exit 1; } 148 149echo "Trying SL in NTLM" 150 151 152for type in \ 153 "" \ 154 "--getverifymic" \ 155 "--wrapunwrap" \ 156 "--getverifymic --wrapunwrap" \ 157 ; do 158 159 echo "Trying NTLM type: ${type}" 160 ${test_context} --mech-type=ntlm ${type} \ 161 --name-type=hostbased-service datan@TEST || \ 162 { echo "test_context 1 failed"; exit 1; } 163 164done 165 166 167echo "Trying CHAP" 168 169${kdigest} digest-server-init \ 170 --kerberos-realm=${R} \ 171 --type=CHAP \ 172 > sdigest-reply || exitcode=1 173 174snonce=`grep server-nonce= sdigest-reply | cut -f2- -d=` 175identifier=`grep identifier= sdigest-reply | cut -f2- -d=` 176opaque=`grep opaque= sdigest-reply | cut -f2- -d=` 177 178${kdigest} digest-client-request \ 179 --type=CHAP \ 180 --username="$username" \ 181 --password="$userpassword" \ 182 --opaque="$opaque" \ 183 --server-identifier="$identifier" \ 184 --server-nonce="$snonce" \ 185 > cdigest-reply || exitcode=1 186 187cresponseData=`grep responseData= cdigest-reply | cut -f2- -d=` 188 189#echo user: $username 190#echo server-nonce: $snonce 191#echo opaqeue: $opaque 192#echo identifier: $identifier 193 194${kdigest} digest-server-request \ 195 --kerberos-realm=${R} \ 196 --type=CHAP \ 197 --username="$username" \ 198 --opaque="$opaque" \ 199 --client-response="$cresponseData" \ 200 --server-identifier="$identifier" \ 201 --server-nonce="$snonce" \ 202 > s2digest-reply || exitcode=1 203 204status=`grep status= s2digest-reply | cut -f2- -d=` 205 206if test "X$status" = "Xok" ; then 207 echo "CHAP response ok" 208else 209 echo "CHAP response failed" 210 exitcode=1 211fi 212 213cresponseData=`echo $cresponseData | sed 's/..../DEADBEEF/'` 214 215${kdigest} digest-server-request \ 216 --kerberos-realm=${R} \ 217 --type=CHAP \ 218 --username="$username" \ 219 --opaque="$opaque" \ 220 --client-response="$cresponseData" \ 221 --server-identifier="$identifier" \ 222 --server-nonce="$snonce" \ 223 > s2digest-reply || exitcode=1 224 225status=`grep status= s2digest-reply | cut -f2- -d=` 226 227if test "X$status" = "Xfailed" ; then 228 echo "CHAP response fail as it should" 229else 230 echo "CHAP response succeeded errorously" 231 exitcode=1 232fi 233 234echo "Trying MS-CHAP-V2" 235 236${kdigest} digest-server-init \ 237 --kerberos-realm=${R} \ 238 --type=MS-CHAP-V2 \ 239 > sdigest-reply || exitcode=1 240 241snonce=`grep server-nonce= sdigest-reply | cut -f2- -d=` 242opaque=`grep opaque= sdigest-reply | cut -f2- -d=` 243cnonce="21402324255E262A28295F2B3A337C7E" 244 245echo "MS-CHAP-V2 client request" 246${kdigest} digest-client-request \ 247 --type=MS-CHAP-V2 \ 248 --username="$username" \ 249 --password="$userpassword" \ 250 --opaque="$opaque" \ 251 --client-nonce="$cnonce" \ 252 --server-nonce="$snonce" \ 253 > cdigest-reply || exitcode=1 254 255cresponseData=`grep responseData= cdigest-reply | cut -f2- -d=` 256cRsp=`grep AuthenticatorResponse= cdigest-reply | cut -f2- -d=` 257ckey=`grep session-key= cdigest-reply | cut -f2- -d=` 258 259${kdigest} digest-server-request \ 260 --kerberos-realm=${R} \ 261 --type=MS-CHAP-V2 \ 262 --username="$username" \ 263 --opaque="$opaque" \ 264 --client-response="$cresponseData" \ 265 --client-nonce="$cnonce" \ 266 --server-nonce="$snonce" \ 267 > s2digest-reply || exitcode=1 268 269status=`grep status= s2digest-reply | cut -f2- -d=` 270sRsp=`grep rsp= s2digest-reply | cut -f2- -d=` 271skey=`grep session-key= s2digest-reply | cut -f2- -d=` 272 273if test "X$sRsp" != "X$cRsp" ; then 274 echo "rsp wrong $sRsp != $cRsp" 275 exitcode=1 276fi 277 278if test "X$skey" != "X$ckey" ; then 279 echo "rsp wrong" 280 exitcode=1 281fi 282 283if test "X$status" = "Xok" ; then 284 echo "MS-CHAP-V2 response ok" 285else 286 echo "MS-CHAP-V2 response failed" 287 exitcode=1 288fi 289 290trap "" EXIT 291 292echo "killing kdc (${kdcpid})" 293sh ${leaks_kill} kdc $kdcpid || exit 1 294 295exit $exitcode 296 297