file_subs.c revision 1.56
1/* $NetBSD: file_subs.c,v 1.56 2005/09/16 16:48:18 christos Exp $ */ 2 3/*- 4 * Copyright (c) 1992 Keith Muller. 5 * Copyright (c) 1992, 1993 6 * The Regents of the University of California. All rights reserved. 7 * 8 * This code is derived from software contributed to Berkeley by 9 * Keith Muller of the University of California, San Diego. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 3. Neither the name of the University nor the names of its contributors 20 * may be used to endorse or promote products derived from this software 21 * without specific prior written permission. 22 * 23 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 26 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 27 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 28 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 29 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 30 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 31 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 32 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 33 * SUCH DAMAGE. 34 */ 35 36#if HAVE_NBTOOL_CONFIG_H 37#include "nbtool_config.h" 38#endif 39 40#include <sys/cdefs.h> 41#if !defined(lint) 42#if 0 43static char sccsid[] = "@(#)file_subs.c 8.1 (Berkeley) 5/31/93"; 44#else 45__RCSID("$NetBSD: file_subs.c,v 1.56 2005/09/16 16:48:18 christos Exp $"); 46#endif 47#endif /* not lint */ 48 49#include <sys/types.h> 50#include <sys/time.h> 51#include <sys/stat.h> 52#include <unistd.h> 53#include <sys/param.h> 54#include <fcntl.h> 55#include <string.h> 56#include <stdio.h> 57#include <ctype.h> 58#include <errno.h> 59#include <sys/uio.h> 60#include <stdlib.h> 61#include "pax.h" 62#include "extern.h" 63#include "options.h" 64 65char *xtmp_name; 66 67static int 68mk_link(char *,struct stat *,char *, int); 69 70static int warn_broken; 71 72/* 73 * routines that deal with file operations such as: creating, removing; 74 * and setting access modes, uid/gid and times of files 75 */ 76#define SET_BITS (S_ISUID | S_ISGID) 77#define FILE_BITS (S_IRWXU | S_IRWXG | S_IRWXO) 78#define A_BITS (FILE_BITS | SET_BITS | S_ISVTX) 79 80/* 81 * The S_ISVTX (sticky bit) can be set by non-superuser on directories 82 * but not other kinds of files. 83 */ 84#define FILEBITS(dir) ((dir) ? (FILE_BITS | S_ISVTX) : FILE_BITS) 85#define SETBITS(dir) ((dir) ? SET_BITS : (SET_BITS | S_ISVTX)) 86 87/* 88 * file_creat() 89 * Create and open a file. 90 * Return: 91 * file descriptor or -1 for failure 92 */ 93 94int 95file_creat(ARCHD *arcn, int write_to_hardlink) 96{ 97 int fd = -1; 98 int oerrno; 99 100 /* 101 * Some horribly busted tar implementations, have directory nodes 102 * that end in a /, but they mark as files. Compensate for that 103 * by not creating a directory node at this point, but a file node, 104 * and not creating the temp file. 105 */ 106 if (arcn->nlen != 0 && arcn->name[arcn->nlen - 1] == '/') { 107 if (!warn_broken) { 108 tty_warn(0, "Archive was created with a broken tar;" 109 " file `%s' is a directory, but marked as plain.", 110 arcn->name); 111 warn_broken = 1; 112 } 113 return -1; 114 } 115 116 /* 117 * In "cpio" archives it's usually the last record of a set of 118 * hardlinks which includes the contents of the file. We cannot 119 * use a tempory file in that case because we couldn't link it 120 * with the existing other hardlinks after restoring the contents 121 * to it. And it's also useless to create the hardlink under a 122 * temporary name because the other hardlinks would have partial 123 * contents while restoring. 124 */ 125 if (write_to_hardlink) 126 return (open(arcn->name, O_TRUNC | O_EXCL | O_RDWR, 0)); 127 128 /* 129 * Create a temporary file name so that the file doesn't have partial 130 * contents while restoring. 131 */ 132 arcn->tmp_name = malloc(arcn->nlen + 8); 133 if (arcn->tmp_name == NULL) { 134 syswarn(1, errno, "Cannot malloc %d bytes", arcn->nlen + 8); 135 return(-1); 136 } 137 if (xtmp_name != NULL) 138 abort(); 139 xtmp_name = arcn->tmp_name; 140 141 for (;;) { 142 /* 143 * try to create the temporary file we use to restore the 144 * contents info. if this fails, keep checking all the nodes 145 * in the path until chk_path() finds that it cannot fix 146 * anything further. if that happens we just give up. 147 */ 148 (void)snprintf(arcn->tmp_name, arcn->nlen + 8, "%s.XXXXXX", 149 arcn->name); 150 fd = mkstemp(arcn->tmp_name); 151 if (fd >= 0) 152 break; 153 oerrno = errno; 154 if (nodirs || chk_path(arcn->name,arcn->sb.st_uid,arcn->sb.st_gid) < 0) { 155 (void)fflush(listf); 156 syswarn(1, oerrno, "Cannot create %s", arcn->tmp_name); 157 xtmp_name = NULL; 158 free(arcn->tmp_name); 159 arcn->tmp_name = NULL; 160 return(-1); 161 } 162 } 163 return(fd); 164} 165 166/* 167 * file_close() 168 * Close file descriptor to a file just created by pax. Sets modes, 169 * ownership and times as required. 170 * Return: 171 * 0 for success, -1 for failure 172 */ 173 174void 175file_close(ARCHD *arcn, int fd) 176{ 177 char *tmp_name; 178 int res; 179 180 if (fd < 0) 181 return; 182 183 tmp_name = (arcn->tmp_name != NULL) ? arcn->tmp_name : arcn->name; 184 185 if (close(fd) < 0) 186 syswarn(0, errno, "Cannot close file descriptor on %s", 187 tmp_name); 188 189 /* 190 * set owner/groups first as this may strip off mode bits we want 191 * then set file permission modes. Then set file access and 192 * modification times. 193 */ 194 if (pids) 195 res = set_ids(tmp_name, arcn->sb.st_uid, arcn->sb.st_gid); 196 else 197 res = 0; 198 199 /* 200 * IMPORTANT SECURITY NOTE: 201 * if not preserving mode or we cannot set uid/gid, then PROHIBIT 202 * set uid/gid bits but restore the file modes (since mkstemp doesn't). 203 */ 204 if (!pmode || res) 205 arcn->sb.st_mode &= ~SETBITS(0); 206 if (pmode) 207 set_pmode(tmp_name, arcn->sb.st_mode); 208 else 209 set_pmode(tmp_name, arcn->sb.st_mode & FILEBITS(0)); 210 if (patime || pmtime) 211 set_ftime(tmp_name, arcn->sb.st_mtime, arcn->sb.st_atime, 0); 212 213 /* Did we write directly to the target file? */ 214 if (arcn->tmp_name == NULL) 215 return; 216 217 /* 218 * Finally, now the temp file is fully instantiated rename it to 219 * the desired file name. 220 */ 221 if (rename(tmp_name, arcn->name) < 0) { 222 syswarn(0, errno, "Cannot rename %s to %s", 223 tmp_name, arcn->name); 224 (void)unlink(tmp_name); 225 } 226 227#if HAVE_STRUCT_STAT_ST_FLAGS 228 if (pfflags && arcn->type != PAX_SLK) 229 set_chflags(arcn->name, arcn->sb.st_flags); 230#endif 231 232 free(arcn->tmp_name); 233 arcn->tmp_name = NULL; 234 xtmp_name = NULL; 235} 236 237/* 238 * lnk_creat() 239 * Create a hard link to arcn->ln_name from arcn->name. arcn->ln_name 240 * must exist; 241 * Return: 242 * 0 if ok, -1 otherwise 243 */ 244 245int 246lnk_creat(ARCHD *arcn, int *payload) 247{ 248 struct stat sb; 249 250 /* 251 * Check if this hardlink carries the "payload". In "cpio" archives 252 * it's usually the last record of a set of hardlinks which includes 253 * the contents of the file. 254 * 255 */ 256 *payload = S_ISREG(arcn->sb.st_mode) && 257 (arcn->sb.st_size > 0) && (arcn->sb.st_size <= arcn->skip); 258 259 /* 260 * We may be running as root, so we have to be sure that link target 261 * is not a directory, so we lstat and check 262 */ 263 if (lstat(arcn->ln_name, &sb) < 0) { 264 syswarn(1, errno, "Cannot link to %s from %s", arcn->ln_name, 265 arcn->name); 266 return(-1); 267 } 268 269 if (S_ISDIR(sb.st_mode)) { 270 tty_warn(1, "A hard link to the directory %s is not allowed", 271 arcn->ln_name); 272 return(-1); 273 } 274 275 return(mk_link(arcn->ln_name, &sb, arcn->name, 0)); 276} 277 278/* 279 * cross_lnk() 280 * Create a hard link to arcn->org_name from arcn->name. Only used in copy 281 * with the -l flag. No warning or error if this does not succeed (we will 282 * then just create the file) 283 * Return: 284 * 1 if copy() should try to create this file node 285 * 0 if cross_lnk() ok, -1 for fatal flaw (like linking to self). 286 */ 287 288int 289cross_lnk(ARCHD *arcn) 290{ 291 /* 292 * try to make a link to original file (-l flag in copy mode). make 293 * sure we do not try to link to directories in case we are running as 294 * root (and it might succeed). 295 */ 296 if (arcn->type == PAX_DIR) 297 return(1); 298 return(mk_link(arcn->org_name, &(arcn->sb), arcn->name, 1)); 299} 300 301/* 302 * chk_same() 303 * In copy mode if we are not trying to make hard links between the src 304 * and destinations, make sure we are not going to overwrite ourselves by 305 * accident. This slows things down a little, but we have to protect all 306 * those people who make typing errors. 307 * Return: 308 * 1 the target does not exist, go ahead and copy 309 * 0 skip it file exists (-k) or may be the same as source file 310 */ 311 312int 313chk_same(ARCHD *arcn) 314{ 315 struct stat sb; 316 317 /* 318 * if file does not exist, return. if file exists and -k, skip it 319 * quietly 320 */ 321 if (lstat(arcn->name, &sb) < 0) 322 return(1); 323 if (kflag) 324 return(0); 325 326 /* 327 * better make sure the user does not have src == dest by mistake 328 */ 329 if ((arcn->sb.st_dev == sb.st_dev) && (arcn->sb.st_ino == sb.st_ino)) { 330 tty_warn(1, "Unable to copy %s, file would overwrite itself", 331 arcn->name); 332 return(0); 333 } 334 return(1); 335} 336 337/* 338 * mk_link() 339 * try to make a hard link between two files. if ign set, we do not 340 * complain. 341 * Return: 342 * 0 if successful (or we are done with this file but no error, such as 343 * finding the from file exists and the user has set -k). 344 * 1 when ign was set to indicates we could not make the link but we 345 * should try to copy/extract the file as that might work (and is an 346 * allowed option). -1 an error occurred. 347 */ 348 349static int 350mk_link(char *to, struct stat *to_sb, char *from, int ign) 351{ 352 struct stat sb; 353 int oerrno; 354 355 /* 356 * if from file exists, it has to be unlinked to make the link. If the 357 * file exists and -k is set, skip it quietly 358 */ 359 if (lstat(from, &sb) == 0) { 360 if (kflag) 361 return(0); 362 363 /* 364 * make sure it is not the same file, protect the user 365 */ 366 if ((to_sb->st_dev==sb.st_dev)&&(to_sb->st_ino == sb.st_ino)) { 367 tty_warn(1, "Cannot link file %s to itself", to); 368 return(-1); 369 } 370 371 /* 372 * try to get rid of the file, based on the type 373 */ 374 if (S_ISDIR(sb.st_mode) && strcmp(from, ".") != 0) { 375 if (rmdir(from) < 0) { 376 syswarn(1, errno, "Cannot remove %s", from); 377 return(-1); 378 } 379 } else if (unlink(from) < 0) { 380 if (!ign) { 381 syswarn(1, errno, "Cannot remove %s", from); 382 return(-1); 383 } 384 return(1); 385 } 386 } 387 388 /* 389 * from file is gone (or did not exist), try to make the hard link. 390 * if it fails, check the path and try it again (if chk_path() says to 391 * try again) 392 */ 393 for (;;) { 394 if (link(to, from) == 0) 395 break; 396 oerrno = errno; 397 if (chk_path(from, to_sb->st_uid, to_sb->st_gid) == 0) 398 continue; 399 if (!ign) { 400 syswarn(1, oerrno, "Cannot link to %s from %s", to, 401 from); 402 return(-1); 403 } 404 return(1); 405 } 406 407 /* 408 * all right the link was made 409 */ 410 return(0); 411} 412 413/* 414 * node_creat() 415 * create an entry in the file system (other than a file or hard link). 416 * If successful, sets uid/gid modes and times as required. 417 * Return: 418 * 0 if ok, -1 otherwise 419 */ 420 421int 422node_creat(ARCHD *arcn) 423{ 424 int res; 425 int ign = 0; 426 int oerrno; 427 int pass = 0; 428 mode_t file_mode; 429 struct stat sb; 430 char target[MAXPATHLEN]; 431 char *nm = arcn->name; 432 int len; 433 434 /* 435 * create node based on type, if that fails try to unlink the node and 436 * try again. finally check the path and try again. As noted in the 437 * file and link creation routines, this method seems to exhibit the 438 * best performance in general use workloads. 439 */ 440 file_mode = arcn->sb.st_mode & FILEBITS(arcn->type == PAX_DIR); 441 442 for (;;) { 443 switch (arcn->type) { 444 case PAX_DIR: 445 /* 446 * If -h (or -L) was given in tar-mode, follow the 447 * potential symlink chain before trying to create the 448 * directory. 449 */ 450 if (strcmp(NM_TAR, argv0) == 0 && Lflag) { 451 while (lstat(nm, &sb) == 0 && 452 S_ISLNK(sb.st_mode)) { 453 len = readlink(nm, target, 454 sizeof target - 1); 455 if (len == -1) { 456 syswarn(0, errno, 457 "cannot follow symlink %s " 458 "in chain for %s", 459 nm, arcn->name); 460 res = -1; 461 goto badlink; 462 } 463 target[len] = '\0'; 464 nm = target; 465 } 466 } 467 res = domkdir(nm, file_mode); 468badlink: 469 if (ign) 470 res = 0; 471 break; 472 case PAX_CHR: 473 file_mode |= S_IFCHR; 474 res = mknod(nm, file_mode, arcn->sb.st_rdev); 475 break; 476 case PAX_BLK: 477 file_mode |= S_IFBLK; 478 res = mknod(nm, file_mode, arcn->sb.st_rdev); 479 break; 480 case PAX_FIF: 481 res = mkfifo(nm, file_mode); 482 break; 483 case PAX_SCK: 484 /* 485 * Skip sockets, operation has no meaning under BSD 486 */ 487 tty_warn(0, 488 "%s skipped. Sockets cannot be copied or extracted", 489 nm); 490 return (-1); 491 case PAX_SLK: 492 res = symlink(arcn->ln_name, nm); 493 break; 494 case PAX_CTG: 495 case PAX_HLK: 496 case PAX_HRG: 497 case PAX_REG: 498 default: 499 /* 500 * we should never get here 501 */ 502 tty_warn(0, "%s has an unknown file type, skipping", 503 nm); 504 return (-1); 505 } 506 507 /* 508 * if we were able to create the node break out of the loop, 509 * otherwise try to unlink the node and try again. if that 510 * fails check the full path and try a final time. 511 */ 512 if (res == 0) 513 break; 514 515 /* 516 * we failed to make the node 517 */ 518 oerrno = errno; 519 switch (pass++) { 520 case 0: 521 if ((ign = unlnk_exist(nm, arcn->type)) < 0) 522 return (-1); 523 continue; 524 525 case 1: 526 if (nodirs || 527 chk_path(nm, arcn->sb.st_uid, 528 arcn->sb.st_gid) < 0) { 529 syswarn(1, oerrno, "Cannot create %s", nm); 530 return (-1); 531 } 532 continue; 533 } 534 535 /* 536 * it must be a file that exists but we can't create or 537 * remove, but we must avoid the infinite loop. 538 */ 539 break; 540 } 541 542 /* 543 * we were able to create the node. set uid/gid, modes and times 544 */ 545 if (pids) 546 res = set_ids(nm, arcn->sb.st_uid, arcn->sb.st_gid); 547 else 548 res = 0; 549 550 /* 551 * IMPORTANT SECURITY NOTE: 552 * if not preserving mode or we cannot set uid/gid, then PROHIBIT any 553 * set uid/gid bits 554 */ 555 if (!pmode || res) 556 arcn->sb.st_mode &= ~SETBITS(arcn->type == PAX_DIR); 557 if (pmode) 558 set_pmode(arcn->name, arcn->sb.st_mode); 559 560 if (arcn->type == PAX_DIR && strcmp(NM_CPIO, argv0) != 0) { 561 /* 562 * Dirs must be processed again at end of extract to set times 563 * and modes to agree with those stored in the archive. However 564 * to allow extract to continue, we may have to also set owner 565 * rights. This allows nodes in the archive that are children 566 * of this directory to be extracted without failure. Both time 567 * and modes will be fixed after the entire archive is read and 568 * before pax exits. 569 */ 570 if (access(nm, R_OK | W_OK | X_OK) < 0) { 571 if (lstat(nm, &sb) < 0) { 572 syswarn(0, errno,"Cannot access %s (stat)", 573 arcn->name); 574 set_pmode(nm,file_mode | S_IRWXU); 575 } else { 576 /* 577 * We have to add rights to the dir, so we make 578 * sure to restore the mode. The mode must be 579 * restored AS CREATED and not as stored if 580 * pmode is not set. 581 */ 582 set_pmode(nm, ((sb.st_mode & 583 FILEBITS(arcn->type == PAX_DIR)) | 584 S_IRWXU)); 585 if (!pmode) 586 arcn->sb.st_mode = sb.st_mode; 587 } 588 589 /* 590 * we have to force the mode to what was set here, 591 * since we changed it from the default as created. 592 */ 593 add_dir(nm, arcn->nlen, &(arcn->sb), 1); 594 } else if (pmode || patime || pmtime) 595 add_dir(nm, arcn->nlen, &(arcn->sb), 0); 596 } 597 598#if HAVE_LUTIMES 599 if (patime || pmtime) 600#else 601 if ((patime || pmtime) && arcn->type != PAX_SLK) 602#endif 603 set_ftime(arcn->name, arcn->sb.st_mtime, arcn->sb.st_atime, 0); 604 605#if HAVE_STRUCT_STAT_ST_FLAGS 606 if (pfflags && arcn->type != PAX_SLK) 607 set_chflags(arcn->name, arcn->sb.st_flags); 608#endif 609 return(0); 610} 611 612/* 613 * unlnk_exist() 614 * Remove node from file system with the specified name. We pass the type 615 * of the node that is going to replace it. When we try to create a 616 * directory and find that it already exists, we allow processing to 617 * continue as proper modes etc will always be set for it later on. 618 * Return: 619 * 0 is ok to proceed, no file with the specified name exists 620 * -1 we were unable to remove the node, or we should not remove it (-k) 621 * 1 we found a directory and we were going to create a directory. 622 */ 623 624int 625unlnk_exist(char *name, int type) 626{ 627 struct stat sb; 628 629 /* 630 * the file does not exist, or -k we are done 631 */ 632 if (lstat(name, &sb) < 0) 633 return(0); 634 if (kflag) 635 return(-1); 636 637 if (S_ISDIR(sb.st_mode)) { 638 /* 639 * try to remove a directory, if it fails and we were going to 640 * create a directory anyway, tell the caller (return a 1). 641 * 642 * don't try to remove the directory if the name is "." 643 * otherwise later file/directory creation fails. 644 */ 645 if (strcmp(name, ".") == 0) 646 return(1); 647 if (rmdir(name) < 0) { 648 if (type == PAX_DIR) 649 return(1); 650 syswarn(1, errno, "Cannot remove directory %s", name); 651 return(-1); 652 } 653 return(0); 654 } 655 656 /* 657 * try to get rid of all non-directory type nodes 658 */ 659 if (unlink(name) < 0) { 660 (void)fflush(listf); 661 syswarn(1, errno, "Cannot unlink %s", name); 662 return(-1); 663 } 664 return(0); 665} 666 667/* 668 * chk_path() 669 * We were trying to create some kind of node in the file system and it 670 * failed. chk_path() makes sure the path up to the node exists and is 671 * writable. When we have to create a directory that is missing along the 672 * path somewhere, the directory we create will be set to the same 673 * uid/gid as the file has (when uid and gid are being preserved). 674 * NOTE: this routine is a real performance loss. It is only used as a 675 * last resort when trying to create entries in the file system. 676 * Return: 677 * -1 when it could find nothing it is allowed to fix. 678 * 0 otherwise 679 */ 680 681int 682chk_path(char *name, uid_t st_uid, gid_t st_gid) 683{ 684 char *spt = name; 685 struct stat sb; 686 int retval = -1; 687 688 /* 689 * watch out for paths with nodes stored directly in / (e.g. /bozo) 690 */ 691 if (*spt == '/') 692 ++spt; 693 694 for(;;) { 695 /* 696 * work forward from the first / and check each part of 697 * the path 698 */ 699 spt = strchr(spt, '/'); 700 if (spt == NULL) 701 break; 702 *spt = '\0'; 703 704 /* 705 * if it exists we assume it is a directory, it is not within 706 * the spec (at least it seems to read that way) to alter the 707 * file system for nodes NOT EXPLICITLY stored on the archive. 708 * If that assumption is changed, you would test the node here 709 * and figure out how to get rid of it (probably like some 710 * recursive unlink()) or fix up the directory permissions if 711 * required (do an access()). 712 */ 713 if (lstat(name, &sb) == 0) { 714 *(spt++) = '/'; 715 continue; 716 } 717 718 /* 719 * the path fails at this point, see if we can create the 720 * needed directory and continue on 721 */ 722 if (domkdir(name, S_IRWXU | S_IRWXG | S_IRWXO) == -1) { 723 *spt = '/'; 724 retval = -1; 725 break; 726 } 727 728 /* 729 * we were able to create the directory. We will tell the 730 * caller that we found something to fix, and it is ok to try 731 * and create the node again. 732 */ 733 retval = 0; 734 if (pids) 735 (void)set_ids(name, st_uid, st_gid); 736 737 /* 738 * make sure the user doesn't have some strange umask that 739 * causes this newly created directory to be unusable. We fix 740 * the modes and restore them back to the creation default at 741 * the end of pax 742 */ 743 if ((access(name, R_OK | W_OK | X_OK) < 0) && 744 (lstat(name, &sb) == 0)) { 745 set_pmode(name, ((sb.st_mode & FILEBITS(0)) | 746 S_IRWXU)); 747 add_dir(name, spt - name, &sb, 1); 748 } 749 *(spt++) = '/'; 750 continue; 751 } 752 return(retval); 753} 754 755/* 756 * set_ftime() 757 * Set the access time and modification time for a named file. If frc 758 * is non-zero we force these times to be set even if the user did not 759 * request access and/or modification time preservation (this is also 760 * used by -t to reset access times). 761 * When ign is zero, only those times the user has asked for are set, the 762 * other ones are left alone. We do not assume the un-documented feature 763 * of many utimes() implementations that consider a 0 time value as a do 764 * not set request. 765 */ 766 767void 768set_ftime(char *fnm, time_t mtime, time_t atime, int frc) 769{ 770 struct timeval tv[2]; 771 struct stat sb; 772 773 tv[0].tv_sec = (long)atime; 774 tv[0].tv_usec = 0; 775 tv[1].tv_sec = (long)mtime; 776 tv[1].tv_usec = 0; 777 if (!frc && (!patime || !pmtime)) { 778 /* 779 * if we are not forcing, only set those times the user wants 780 * set. We get the current values of the times if we need them. 781 */ 782 if (lstat(fnm, &sb) == 0) { 783#if BSD4_4 && !HAVE_NBTOOL_CONFIG_H 784 if (!patime) 785 TIMESPEC_TO_TIMEVAL(&tv[0], &sb.st_atimespec); 786 if (!pmtime) 787 TIMESPEC_TO_TIMEVAL(&tv[1], &sb.st_mtimespec); 788#else 789 if (!patime) 790 tv[0].tv_sec = sb.st_atime; 791 if (!pmtime) 792 tv[1].tv_sec = sb.st_mtime; 793#endif 794 } else 795 syswarn(0, errno, "Cannot obtain file stats %s", fnm); 796 } 797 798 /* 799 * set the times 800 */ 801#if HAVE_LUTIMES 802 if (lutimes(fnm, tv)) 803#else 804 if (utimes(fnm, tv)) 805#endif 806 syswarn(1, errno, "Access/modification time set failed on: %s", 807 fnm); 808 return; 809} 810 811/* 812 * set_ids() 813 * set the uid and gid of a file system node 814 * Return: 815 * 0 when set, -1 on failure 816 */ 817 818int 819set_ids(char *fnm, uid_t uid, gid_t gid) 820{ 821 if (geteuid() == 0) 822 if (lchown(fnm, uid, gid)) { 823 (void)fflush(listf); 824 syswarn(1, errno, "Cannot set file uid/gid of %s", 825 fnm); 826 return(-1); 827 } 828 return(0); 829} 830 831/* 832 * set_pmode() 833 * Set file access mode 834 */ 835 836void 837set_pmode(char *fnm, mode_t mode) 838{ 839 mode &= A_BITS; 840 if (lchmod(fnm, mode)) { 841 (void)fflush(listf); 842 syswarn(1, errno, "Cannot set permissions on %s", fnm); 843 } 844 return; 845} 846 847/* 848 * set_chflags() 849 * Set 4.4BSD file flags 850 */ 851void 852set_chflags(char *fnm, u_int32_t flags) 853{ 854 855#if 0 856 if (chflags(fnm, flags) < 0 && errno != EOPNOTSUPP) 857 syswarn(1, errno, "Cannot set file flags on %s", fnm); 858#endif 859 return; 860} 861 862/* 863 * file_write() 864 * Write/copy a file (during copy or archive extract). This routine knows 865 * how to copy files with lseek holes in it. (Which are read as file 866 * blocks containing all 0's but do not have any file blocks associated 867 * with the data). Typical examples of these are files created by dbm 868 * variants (.pag files). While the file size of these files are huge, the 869 * actual storage is quite small (the files are sparse). The problem is 870 * the holes read as all zeros so are probably stored on the archive that 871 * way (there is no way to determine if the file block is really a hole, 872 * we only know that a file block of all zero's can be a hole). 873 * At this writing, no major archive format knows how to archive files 874 * with holes. However, on extraction (or during copy, -rw) we have to 875 * deal with these files. Without detecting the holes, the files can 876 * consume a lot of file space if just written to disk. This replacement 877 * for write when passed the basic allocation size of a file system block, 878 * uses lseek whenever it detects the input data is all 0 within that 879 * file block. In more detail, the strategy is as follows: 880 * While the input is all zero keep doing an lseek. Keep track of when we 881 * pass over file block boundaries. Only write when we hit a non zero 882 * input. once we have written a file block, we continue to write it to 883 * the end (we stop looking at the input). When we reach the start of the 884 * next file block, start checking for zero blocks again. Working on file 885 * block boundaries significantly reduces the overhead when copying files 886 * that are NOT very sparse. This overhead (when compared to a write) is 887 * almost below the measurement resolution on many systems. Without it, 888 * files with holes cannot be safely copied. It does has a side effect as 889 * it can put holes into files that did not have them before, but that is 890 * not a problem since the file contents are unchanged (in fact it saves 891 * file space). (Except on paging files for diskless clients. But since we 892 * cannot determine one of those file from here, we ignore them). If this 893 * ever ends up on a system where CTG files are supported and the holes 894 * are not desired, just do a conditional test in those routines that 895 * call file_write() and have it call write() instead. BEFORE CLOSING THE 896 * FILE, make sure to call file_flush() when the last write finishes with 897 * an empty block. A lot of file systems will not create an lseek hole at 898 * the end. In this case we drop a single 0 at the end to force the 899 * trailing 0's in the file. 900 * ---Parameters--- 901 * rem: how many bytes left in this file system block 902 * isempt: have we written to the file block yet (is it empty) 903 * sz: basic file block allocation size 904 * cnt: number of bytes on this write 905 * str: buffer to write 906 * Return: 907 * number of bytes written, -1 on write (or lseek) error. 908 */ 909 910int 911file_write(int fd, char *str, int cnt, int *rem, int *isempt, int sz, 912 char *name) 913{ 914 char *pt; 915 char *end; 916 int wcnt; 917 char *st = str; 918 char **strp; 919 size_t *lenp; 920 921 /* 922 * while we have data to process 923 */ 924 while (cnt) { 925 if (!*rem) { 926 /* 927 * We are now at the start of file system block again 928 * (or what we think one is...). start looking for 929 * empty blocks again 930 */ 931 *isempt = 1; 932 *rem = sz; 933 } 934 935 /* 936 * only examine up to the end of the current file block or 937 * remaining characters to write, whatever is smaller 938 */ 939 wcnt = MIN(cnt, *rem); 940 cnt -= wcnt; 941 *rem -= wcnt; 942 if (*isempt) { 943 /* 944 * have not written to this block yet, so we keep 945 * looking for zero's 946 */ 947 pt = st; 948 end = st + wcnt; 949 950 /* 951 * look for a zero filled buffer 952 */ 953 while ((pt < end) && (*pt == '\0')) 954 ++pt; 955 956 if (pt == end) { 957 /* 958 * skip, buf is empty so far 959 */ 960 if (fd > -1 && 961 lseek(fd, (off_t)wcnt, SEEK_CUR) < 0) { 962 syswarn(1, errno, "File seek on %s", 963 name); 964 return(-1); 965 } 966 st = pt; 967 continue; 968 } 969 /* 970 * drat, the buf is not zero filled 971 */ 972 *isempt = 0; 973 } 974 975 /* 976 * have non-zero data in this file system block, have to write 977 */ 978 switch (fd) { 979 case -PAX_GLF: 980 strp = &gnu_name_string; 981 lenp = &gnu_name_length; 982 break; 983 case -PAX_GLL: 984 strp = &gnu_link_string; 985 lenp = &gnu_link_length; 986 break; 987 default: 988 strp = NULL; 989 lenp = NULL; 990 break; 991 } 992 if (strp) { 993 char *nstr = *strp ? realloc(*strp, *lenp + wcnt + 1) : 994 malloc(wcnt + 1); 995 if (nstr == NULL) { 996 tty_warn(1, "Out of memory"); 997 return(-1); 998 } 999 (void)strlcpy(&nstr[*lenp], st, wcnt + 1); 1000 *strp = nstr; 1001 *lenp += wcnt; 1002 } else if (xwrite(fd, st, wcnt) != wcnt) { 1003 syswarn(1, errno, "Failed write to file %s", name); 1004 return(-1); 1005 } 1006 st += wcnt; 1007 } 1008 return(st - str); 1009} 1010 1011/* 1012 * file_flush() 1013 * when the last file block in a file is zero, many file systems will not 1014 * let us create a hole at the end. To get the last block with zeros, we 1015 * write the last BYTE with a zero (back up one byte and write a zero). 1016 */ 1017 1018void 1019file_flush(int fd, char *fname, int isempt) 1020{ 1021 static char blnk[] = "\0"; 1022 1023 /* 1024 * silly test, but make sure we are only called when the last block is 1025 * filled with all zeros. 1026 */ 1027 if (!isempt) 1028 return; 1029 1030 /* 1031 * move back one byte and write a zero 1032 */ 1033 if (lseek(fd, (off_t)-1, SEEK_CUR) < 0) { 1034 syswarn(1, errno, "Failed seek on file %s", fname); 1035 return; 1036 } 1037 1038 if (write_with_restart(fd, blnk, 1) < 0) 1039 syswarn(1, errno, "Failed write to file %s", fname); 1040 return; 1041} 1042 1043/* 1044 * rdfile_close() 1045 * close a file we have been reading (to copy or archive). If we have to 1046 * reset access time (tflag) do so (the times are stored in arcn). 1047 */ 1048 1049void 1050rdfile_close(ARCHD *arcn, int *fd) 1051{ 1052 /* 1053 * make sure the file is open 1054 */ 1055 if (*fd < 0) 1056 return; 1057 1058 (void)close(*fd); 1059 *fd = -1; 1060 if (!tflag) 1061 return; 1062 1063 /* 1064 * user wants last access time reset 1065 */ 1066 set_ftime(arcn->org_name, arcn->sb.st_mtime, arcn->sb.st_atime, 1); 1067 return; 1068} 1069 1070/* 1071 * set_crc() 1072 * read a file to calculate its crc. This is a real drag. Archive formats 1073 * that have this, end up reading the file twice (we have to write the 1074 * header WITH the crc before writing the file contents. Oh well... 1075 * Return: 1076 * 0 if was able to calculate the crc, -1 otherwise 1077 */ 1078 1079int 1080set_crc(ARCHD *arcn, int fd) 1081{ 1082 int i; 1083 int res; 1084 off_t cpcnt = 0L; 1085 u_long size; 1086 unsigned long crc = 0L; 1087 char tbuf[FILEBLK]; 1088 struct stat sb; 1089 1090 if (fd < 0) { 1091 /* 1092 * hmm, no fd, should never happen. well no crc then. 1093 */ 1094 arcn->crc = 0L; 1095 return(0); 1096 } 1097 1098 if ((size = (u_long)arcn->sb.st_blksize) > (u_long)sizeof(tbuf)) 1099 size = (u_long)sizeof(tbuf); 1100 1101 /* 1102 * read all the bytes we think that there are in the file. If the user 1103 * is trying to archive an active file, forget this file. 1104 */ 1105 for(;;) { 1106 if ((res = read(fd, tbuf, size)) <= 0) 1107 break; 1108 cpcnt += res; 1109 for (i = 0; i < res; ++i) 1110 crc += (tbuf[i] & 0xff); 1111 } 1112 1113 /* 1114 * safety check. we want to avoid archiving files that are active as 1115 * they can create inconsistant archive copies. 1116 */ 1117 if (cpcnt != arcn->sb.st_size) 1118 tty_warn(1, "File changed size %s", arcn->org_name); 1119 else if (fstat(fd, &sb) < 0) 1120 syswarn(1, errno, "Failed stat on %s", arcn->org_name); 1121 else if (arcn->sb.st_mtime != sb.st_mtime) 1122 tty_warn(1, "File %s was modified during read", arcn->org_name); 1123 else if (lseek(fd, (off_t)0L, SEEK_SET) < 0) 1124 syswarn(1, errno, "File rewind failed on: %s", arcn->org_name); 1125 else { 1126 arcn->crc = crc; 1127 return(0); 1128 } 1129 return(-1); 1130} 1131