Makefile revision 1.298
1# $NetBSD: Makefile,v 1.298 2012/08/15 12:50:12 apb Exp $ 2 3# 4# This is the top-level makefile for building NetBSD. For an outline of 5# how to build a snapshot or release, as well as other release engineering 6# information, see http://www.NetBSD.org/developers/releng/index.html 7# 8# Not everything you can set or do is documented in this makefile. In 9# particular, you should review the files in /usr/share/mk (especially 10# bsd.README) for general information on building programs and writing 11# Makefiles within this structure, and see the comments in src/etc/Makefile 12# for further information on installation and release set options. 13# 14# Variables listed below can be set on the make command line (highest 15# priority), in /etc/mk.conf (middle priority), or in the environment 16# (lowest priority). 17# 18# Variables: 19# DESTDIR is the target directory for installation of the compiled 20# software. It defaults to /. Note that programs are built against 21# libraries installed in DESTDIR. 22# MKMAN, if `no', will prevent building of manual pages. 23# MKOBJDIRS, if not `no', will build object directories at 24# an appropriate point in a build. 25# MKSHARE, if `no', will prevent building and installing 26# anything in /usr/share. 27# MKUPDATE, if not `no', will avoid a `make cleandir' at the start of 28# `make build', as well as having the effects listed in 29# /usr/share/mk/bsd.README. 30# NOCLEANDIR, if defined, will avoid a `make cleandir' at the start 31# of the `make build'. 32# NOINCLUDES will avoid the `make includes' usually done by `make build'. 33# 34# See mk.conf(5) for more details. 35# 36# 37# Targets: 38# build: 39# Builds a full release of NetBSD in DESTDIR, except for the 40# /etc configuration files. 41# If BUILD_DONE is set, this is an empty target. 42# distribution: 43# Builds a full release of NetBSD in DESTDIR, including the /etc 44# configuration files. 45# buildworld: 46# As per `make distribution', except that it ensures that DESTDIR 47# is not the root directory. 48# installworld: 49# Install the distribution from DESTDIR to INSTALLWORLDDIR (which 50# defaults to the root directory). Ensures that INSTALLWORLDDIR 51# is not the root directory if cross compiling. 52# release: 53# Does a `make distribution', and then tars up the DESTDIR files 54# into ${RELEASEDIR}/${RELEASEMACHINEDIR}, in release(7) format. 55# (See etc/Makefile for more information on this.) 56# regression-tests: 57# Runs the regression tests in "regress" on this host. 58# sets: 59# Populate ${RELEASEDIR}/${RELEASEMACHINEDIR}/binary/sets 60# from ${DESTDIR} 61# sourcesets: 62# Populate ${RELEASEDIR}/source/sets from ${NETBSDSRCDIR} 63# syspkgs: 64# Populate ${RELEASEDIR}/${RELEASEMACHINEDIR}/binary/syspkgs 65# from ${DESTDIR} 66# iso-image: 67# Create CD-ROM image in RELEASEDIR/iso. 68# RELEASEDIR must already have been populated by `make release' 69# or equivalent. 70# iso-image-source: 71# Create CD-ROM image with source in RELEASEDIR/iso. 72# RELEASEDIR must already have been populated by 73# `make release sourcesets' or equivalent. 74# live-image: 75# Create bootable live image for emulators or USB stick etc. 76# in RELEASEDIR/liveimage. 77# RELEASEDIR must already have been populated by `make release' 78# or equivalent. 79# install-image: 80# Create bootable installation image for USB stick etc. 81# in RELEASEDIR/installimage. 82# RELEASEDIR must already have been populated by `make release' 83# or equivalent. 84# 85# Targets invoked by `make build,' in order: 86# cleandir: cleans the tree. 87# do-top-obj: creates the top level object directory. 88# do-tools-obj: creates object directories for the host toolchain. 89# do-tools: builds host toolchain. 90# obj: creates object directories. 91# do-distrib-dirs: creates the distribution directories. 92# includes: installs include files. 93# do-tools-compat: builds the "libnbcompat" library; needed for some 94# random host tool programs in the source tree. 95# do-lib-csu: builds and installs prerequisites from lib/csu. 96# do-libgcc: builds and installs prerequisites from 97# gnu/lib/crtstuff${LIBGCC_EXT} (if necessary) and 98# gnu/lib/libgcc${LIBGCC_EXT}. 99# do-libpcc: builds and install prerequisites from 100# external/bsd/pcc/crtstuff (if necessary) and 101# external/bsd/pcc/libpcc. 102# do-lib-libc: builds and installs prerequisites from lib/libc. 103# do-lib: builds and installs prerequisites from lib. 104# do-sys-rump-dev-lib: builds and installs prerequisites from sys/rump/dev/lib 105# do-sys-rump-fs-lib: builds and installs prerequisites from sys/rump/fs/lib 106# do-sys-rump-kern-lib: builds and installs prereq. from sys/rump/kern/lib 107# do-sys-rump-net-lib: builds and installs prerequisites from sys/rump/net/lib 108# do-sys-modules: builds and installs kernel modules (used by rump binaries) 109# do-ld.so: builds and installs prerequisites from libexec/ld.*_so. 110# do-compat-lib-csu: builds and installs prerequisites from compat/lib/csu 111# if ${MKCOMPAT} != "no". 112# do-compat-libgcc: builds and installs prerequisites from 113# compat/gnu/lib/crtstuff${LIBGCC_EXT} (if necessary) and 114# compat/gnu/lib/libgcc${LIBGCC_EXT} if ${MKCOMPAT} != "no". 115# do-compat-lib-libc: builds and installs prerequisites from compat/lib/libc 116# if ${MKCOMPAT} != "no". 117# do-build: builds and installs the entire system. 118# do-x11: builds and installs X11 if ${MKX11} != "no"; either 119# X11R7 from src/external/mit/xorg if ${X11FLAVOUR} == "Xorg" 120# or X11R6 from src/x11 121# do-extsrc: builds and installs extsrc if ${MKEXTSRC} != "no". 122# do-obsolete: installs the obsolete sets (for the postinstall-* targets). 123# 124 125.if ${.MAKEFLAGS:M${.CURDIR}/share/mk} == "" 126.MAKEFLAGS: -m ${.CURDIR}/share/mk 127.endif 128 129# 130# If _SRC_TOP_OBJ_ gets set here, we will end up with a directory that may 131# not be the top level objdir, because "make obj" can happen in the *middle* 132# of "make build" (long after <bsd.own.mk> is calculated it). So, pre-set 133# _SRC_TOP_OBJ_ here so it will not be added to ${.MAKEOVERRIDES}. 134# 135_SRC_TOP_OBJ_= 136 137.include <bsd.own.mk> 138 139# 140# Sanity check: make sure that "make build" is not invoked simultaneously 141# with a standard recursive target. 142# 143 144.if make(build) || make(release) || make(snapshot) 145.for targ in ${TARGETS:Nobj:Ncleandir} 146.if make(${targ}) && !target(.BEGIN) 147.BEGIN: 148 @echo 'BUILD ABORTED: "make build" and "make ${targ}" are mutually exclusive.' 149 @false 150.endif 151.endfor 152.endif 153 154# 155# _SUBDIR is used to set SUBDIR, after removing directories that have 156# BUILD_${dir}=no, or that have no ${dir}/Makefile. 157# 158_SUBDIR= tools lib include gnu external crypto/external bin games 159_SUBDIR+= libexec sbin usr.bin 160_SUBDIR+= usr.sbin share rescue sys etc tests compat .WAIT distrib regress 161 162.for dir in ${_SUBDIR} 163.if "${dir}" == ".WAIT" \ 164 || (${BUILD_${dir}:Uyes} != "no" && exists(${dir}/Makefile)) 165SUBDIR+= ${dir} 166.endif 167.endfor 168 169.if exists(regress) 170regression-tests: .PHONY .MAKE 171 @echo Running regression tests... 172 ${MAKEDIRTARGET} regress regress 173.endif 174 175.if ${MKUNPRIVED} != "no" 176NOPOSTINSTALL= # defined 177.endif 178 179afterinstall: .PHONY .MAKE 180.if ${MKMAN} != "no" 181 ${MAKEDIRTARGET} share/man makedb 182.endif 183.if (${MKUNPRIVED} != "no" && ${MKINFO} != "no") 184 ${MAKEDIRTARGET} gnu/usr.bin/texinfo/install-info infodir-meta 185.endif 186.if !defined(NOPOSTINSTALL) 187 ${MAKEDIRTARGET} . postinstall-check 188.endif 189 190_POSTINSTALL= ${.CURDIR}/usr.sbin/postinstall/postinstall 191_POSTINSTALL_ENV= \ 192 AWK=${TOOL_AWK:Q} \ 193 DB=${TOOL_DB:Q} \ 194 HOST_SH=${HOST_SH:Q} \ 195 MAKE=${MAKE:Q} \ 196 PWD_MKDB=${TOOL_PWD_MKDB:Q} \ 197 STAT=${TOOL_STAT:Q} 198 199postinstall-check: .PHONY 200 @echo " === Post installation checks ===" 201 ${_POSTINSTALL_ENV} ${HOST_SH} ${_POSTINSTALL} -s ${.CURDIR} -d ${DESTDIR}/ check; if [ $$? -gt 1 ]; then exit 1; fi 202 @echo " ================================" 203 204postinstall-fix: .NOTMAIN .PHONY 205 @echo " === Post installation fixes ===" 206 ${_POSTINSTALL_ENV} ${HOST_SH} ${_POSTINSTALL} -s ${.CURDIR} -d ${DESTDIR}/ fix 207 @echo " ===============================" 208 209postinstall-fix-obsolete: .NOTMAIN .PHONY 210 @echo " === Removing obsolete files ===" 211 ${_POSTINSTALL_ENV} ${HOST_SH} ${_POSTINSTALL} -s ${.CURDIR} -d ${DESTDIR}/ fix obsolete 212 @echo " ===============================" 213 214 215# 216# Targets (in order!) called by "make build". 217# 218.if defined(HAVE_GCC) 219.if ${HAVE_GCC} == "4" 220LIBGCC_EXT=4 221BUILD_CC_LIB_BASEDIR= gnu/lib 222BUILD_CC_LIB_BASETARGET= gnu-lib 223.else 224LIBGCC_EXT= 225BUILD_CC_LIB_BASEDIR= external/gpl3/gcc/lib 226BUILD_CC_LIB_BASETARGET= external-gpl3-gcc-lib 227.endif 228.endif 229 230BUILDTARGETS+= check-tools 231.if ${MKUPDATE} == "no" && !defined(NOCLEANDIR) 232BUILDTARGETS+= cleandir 233.endif 234.if ${MKOBJDIRS} != "no" 235BUILDTARGETS+= do-top-obj 236.endif 237.if ${USETOOLS} == "yes" # { 238.if ${MKOBJDIRS} != "no" 239BUILDTARGETS+= do-tools-obj 240.endif 241BUILDTARGETS+= do-tools 242.endif # USETOOLS # } 243.if ${MKOBJDIRS} != "no" 244BUILDTARGETS+= obj 245.endif 246BUILDTARGETS+= clean_METALOG 247.if !defined(NODISTRIBDIRS) 248BUILDTARGETS+= do-distrib-dirs 249.endif 250.if !defined(NOINCLUDES) 251BUILDTARGETS+= includes 252.endif 253BUILDTARGETS+= do-tools-compat 254BUILDTARGETS+= do-lib-csu 255.if ${MKGCC} != "no" 256BUILDTARGETS+= do-libgcc 257.endif 258.if ${MKPCC} != "no" 259BUILDTARGET+= do-libpcc 260.endif 261BUILDTARGETS+= do-lib-libc 262BUILDTARGETS+= do-lib 263.if ${MKKMOD} != "no" 264BUILDTARGETS+= do-sys-modules 265.endif 266.if ${MKRUMP} != "no" 267BUILDTARGETS+= do-sys-rump-dev-lib do-sys-rump-fs-lib 268BUILDTARGETS+= do-sys-rump-kern-lib do-sys-rump-net-lib 269.endif 270.if ${MKCOMPAT} != "no" 271BUILDTARGETS+= do-compat-lib-csu 272BUILDTARGETS+= do-compat-libgcc 273BUILDTARGETS+= do-compat-lib-libc 274.endif 275BUILDTARGETS+= do-ld.so 276BUILDTARGETS+= do-build 277.if ${MKX11} != "no" 278BUILDTARGETS+= do-x11 279.endif 280.if ${MKEXTSRC} != "no" 281BUILDTARGETS+= do-extsrc 282.endif 283BUILDTARGETS+= do-obsolete 284 285# 286# Enforce proper ordering of some rules. 287# 288 289.ORDER: ${BUILDTARGETS} 290includes-lib: .PHONY includes-include includes-sys 291includes-gnu: .PHONY includes-lib 292 293# 294# Build the system and install into DESTDIR. 295# 296 297START_TIME!= date 298 299build: .PHONY .MAKE 300.if defined(BUILD_DONE) 301 @echo "Build already installed into ${DESTDIR}" 302.else 303 @echo "Build started at: ${START_TIME}" 304.for tgt in ${BUILDTARGETS} 305 ${MAKEDIRTARGET} . ${tgt} 306.endfor 307 ${MAKEDIRTARGET} etc install-etc-release 308 @echo "Build started at: ${START_TIME}" 309 @printf "Build finished at: " && date 310.endif 311 312# 313# Build a full distribution, but not a release (i.e. no sets into 314# ${RELEASEDIR}). "buildworld" enforces a build to ${DESTDIR} != / 315# 316 317distribution buildworld: .PHONY .MAKE 318.if make(buildworld) && \ 319 (!defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/") 320 @echo "Won't make ${.TARGET} with DESTDIR=/" 321 @false 322.endif 323 ${MAKEDIRTARGET} . build NOPOSTINSTALL=1 324 ${MAKEDIRTARGET} etc distribution INSTALL_DONE=1 325.if defined(DESTDIR) && ${DESTDIR} != "" && ${DESTDIR} != "/" 326 ${MAKEDIRTARGET} . postinstall-fix-obsolete 327 ${MAKEDIRTARGET} distrib/sets checkflist 328.endif 329 @echo "make ${.TARGET} started at: ${START_TIME}" 330 @printf "make ${.TARGET} finished at: " && date 331 332# 333# Install the distribution from $DESTDIR to $INSTALLWORLDDIR (defaults to `/') 334# If installing to /, ensures that the host's operating system is NetBSD and 335# the host's `uname -m` == ${MACHINE}. 336# 337 338HOST_UNAME_S!= uname -s 339HOST_UNAME_M!= uname -m 340 341installworld: .PHONY .MAKE 342.if (!defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/") 343 @echo "Can't make ${.TARGET} to DESTDIR=/" 344 @false 345.endif 346.if !defined(INSTALLWORLDDIR) || \ 347 ${INSTALLWORLDDIR} == "" || ${INSTALLWORLDDIR} == "/" 348.if (${HOST_UNAME_S} != "NetBSD") 349 @echo "Won't cross-make ${.TARGET} from ${HOST_UNAME_S} to NetBSD with INSTALLWORLDDIR=/" 350 @false 351.endif 352.if (${HOST_UNAME_M} != ${MACHINE}) 353 @echo "Won't cross-make ${.TARGET} from ${HOST_UNAME_M} to ${MACHINE} with INSTALLWORLDDIR=/" 354 @false 355.endif 356.endif 357 ${MAKEDIRTARGET} distrib/sets installsets \ 358 INSTALLDIR=${INSTALLWORLDDIR:U/} INSTALLSETS=${INSTALLSETS:Q} 359 ${MAKEDIRTARGET} . postinstall-check DESTDIR=${INSTALLWORLDDIR} 360 @echo "make ${.TARGET} started at: ${START_TIME}" 361 @printf "make ${.TARGET} finished at: " && date 362 363# 364# Install modules from $DESTDIR to $INSTALLMODULESDIR 365# 366installmodules: .PHONY .MAKE 367.if (!defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/") 368 @echo "Can't make ${.TARGET} to DESTDIR=/" 369 @false 370.endif 371.if !defined(INSTALLMODULESDIR) || \ 372 ${INSTALLMODULESDIR} == "" || ${INSTALLMODULESDIR} == "/" 373.if (${HOST_UNAME_S} != "NetBSD") 374 @echo "Won't cross-make ${.TARGET} from ${HOST_UNAME_S} to NetBSD with INSTALLMODULESDIR=/" 375 @false 376.endif 377.if (${HOST_UNAME_M} != ${MACHINE}) 378 @echo "Won't cross-make ${.TARGET} from ${HOST_UNAME_M} to ${MACHINE} with INSTALLMODULESDIR=/" 379 @false 380.endif 381.endif 382 ${MAKEDIRTARGET} sys/modules install DESTDIR=${INSTALLMODULESDIR:U/} 383 @echo "make ${.TARGET} started at: ${START_TIME}" 384 @printf "make ${.TARGET} finished at: " && date 385 386# 387# Create sets from $DESTDIR or $NETBSDSRCDIR into $RELEASEDIR 388# 389 390.for tgt in sets sourcesets syspkgs 391${tgt}: .PHONY .MAKE 392 ${MAKEDIRTARGET} distrib/sets ${tgt} 393.endfor 394 395# 396# Build a release or snapshot (implies "make distribution"). Note that 397# in this case, the set lists will be checked before the tar files 398# are made. 399# 400 401release snapshot: .PHONY .MAKE 402 ${MAKEDIRTARGET} . distribution 403 ${MAKEDIRTARGET} etc release DISTRIBUTION_DONE=1 404 @echo "make ${.TARGET} started at: ${START_TIME}" 405 @printf "make ${.TARGET} finished at: " && date 406 407# 408# Create a CD-ROM image. 409# 410 411iso-image: .PHONY 412 ${MAKEDIRTARGET} distrib iso_image 413 ${MAKEDIRTARGET} etc iso-image 414 @echo "make ${.TARGET} started at: ${START_TIME}" 415 @printf "make ${.TARGET} finished at: " && date 416 417iso-image-source: .PHONY 418 ${MAKEDIRTARGET} distrib iso_image CDSOURCE=true 419 ${MAKEDIRTARGET} etc iso-image 420 @echo "make ${.TARGET} started at: ${START_TIME}" 421 @printf "make ${.TARGET} finished at: " && date 422 423# 424# Create bootable live images. 425# 426 427live-image: .PHONY 428 ${MAKEDIRTARGET} etc live-image 429 @echo "make ${.TARGET} started at: ${START_TIME}" 430 @printf "make ${.TARGET} finished at: " && date 431 432# 433# Create bootable installation images. 434# 435 436install-image: .PHONY 437 ${MAKEDIRTARGET} etc install-image 438 @echo "make ${.TARGET} started at: ${START_TIME}" 439 @printf "make ${.TARGET} finished at: " && date 440 441# 442# Special components of the "make build" process. 443# 444 445check-tools: .PHONY 446.if ${TOOLCHAIN_MISSING} != "no" && !defined(EXTERNAL_TOOLCHAIN) 447 @echo '*** WARNING: Building on MACHINE=${MACHINE} with missing toolchain.' 448 @echo '*** May result in a failed build or corrupt binaries!' 449.elif defined(EXTERNAL_TOOLCHAIN) 450 @echo '*** Using external toolchain rooted at ${EXTERNAL_TOOLCHAIN}.' 451.endif 452.if defined(NBUILDJOBS) 453 @echo '*** WARNING: NBUILDJOBS is obsolete; use -j directly instead!' 454.endif 455 456# Delete or sanitise a leftover METALOG from a previous build. 457clean_METALOG: .PHONY .MAKE 458.if ${MKUPDATE} != "no" 459 ${MAKEDIRTARGET} distrib/sets clean_METALOG 460.endif 461 462do-distrib-dirs: .PHONY .MAKE 463.if !defined(DESTDIR) || ${DESTDIR} == "" 464 ${MAKEDIRTARGET} etc distrib-dirs DESTDIR=/ 465.else 466 ${MAKEDIRTARGET} etc distrib-dirs DESTDIR=${DESTDIR} 467.endif 468 469.for targ in cleandir obj includes 470do-${targ}: .PHONY ${targ} 471 @true 472.endfor 473 474.if defined(HAVE_GCC) 475.if ${USE_COMPILERCRTSTUFF} == "yes" 476BUILD_CC_LIB= ${BUILD_CC_LIB_BASEDIR}/crtstuff${LIBGCC_EXT} 477.endif 478BUILD_CC_LIB+= ${BUILD_CC_LIB_BASEDIR}/libgcc${LIBGCC_EXT} 479.elif defined(HAVE_PCC) 480BUILD_CC_LIB+= external/bsd/pcc/crtstuff 481BUILD_CC_LIB+= external/bsd/pcc/libpcc 482.endif 483 484.for dir in tools tools/compat lib/csu ${BUILD_CC_LIB} lib/libc lib sys/rump/dev/lib sys/rump/fs/lib sys/rump/kern/lib sys/rump/net/lib sys/modules 485do-${dir:S/\//-/g}: .PHONY .MAKE 486.for targ in dependall install 487 ${MAKEDIRTARGET} ${dir} ${targ} 488.endfor 489.endfor 490 491.if ${MKCOMPAT} != "no" 492COMPAT_SUBDIR_LIST=lib/csu ${BUILD_CC_LIB} lib/libc 493.for dir in ${COMPAT_SUBDIR_LIST} 494do-compat-${dir:S/\//-/g}: .PHONY .MAKE 495.for targ in dependall install 496 ${MAKEDIRTARGET} compat ${targ} BOOTSTRAP_SUBDIRS="../../../${dir}" 497.endfor 498.endfor 499.endif 500 501do-top-obj: .PHONY .MAKE 502 ${MAKEDIRTARGET} . obj NOSUBDIR= 503 504do-tools-obj: .PHONY .MAKE 505 ${MAKEDIRTARGET} tools obj 506 507do-libgcc: .PHONY .MAKE 508.if defined(HAVE_GCC) 509.if ${MKGCC} != "no" 510.if ${USE_COMPILERCRTSTUFF} == "yes" 511 ${MAKEDIRTARGET} . do-${BUILD_CC_LIB_BASETARGET}-crtstuff${LIBGCC_EXT} 512.endif 513 ${MAKEDIRTARGET} . do-${BUILD_CC_LIB_BASETARGET}-libgcc${LIBGCC_EXT} 514.endif 515.endif 516 517do-compat-libgcc: .PHONY .MAKE 518.if defined(HAVE_GCC) 519.if ${MKGCC} != "no" 520.if ${USE_COMPILERCRTSTUFF} == "yes" 521 ${MAKEDIRTARGET} . do-compat-${BUILD_CC_LIB_BASETARGET}-crtstuff${LIBGCC_EXT} 522.endif 523 ${MAKEDIRTARGET} . do-compat-${BUILD_CC_LIB_BASETARGET}-libgcc${LIBGCC_EXT} 524.endif 525.endif 526 527do-libpcc: .PHONY .MAKE 528.if defined(HAVE_PCC) 529.if ${MKPCC} != "no" 530.if ${USE_COMPILERCRTSTUFF} == "yes" 531 ${MAKEDIRTARGET} . do-pcc-lib-crtstuff 532.endif 533 ${MAKEDIRTARGET} . do-pcc-lib-libpcc 534.endif 535.endif 536 537do-ld.so: .PHONY .MAKE 538.for targ in dependall install 539 ${MAKEDIRTARGET} libexec/ld.elf_so ${targ} 540.endfor 541 542do-build: .PHONY .MAKE 543.for targ in dependall install 544 ${MAKEDIRTARGET} . ${targ} BUILD_tools=no BUILD_lib=no 545.endfor 546 547do-x11: .PHONY .MAKE 548.if ${MKX11} != "no" 549.if ${X11FLAVOUR} == "Xorg" 550 ${MAKEDIRTARGET} external/mit/xorg build 551.else 552 ${MAKEDIRTARGET} x11 build 553.endif 554.else 555 @echo "MKX11 is not enabled" 556 @false 557.endif 558 559do-extsrc: .PHONY .MAKE 560.if ${MKEXTSRC} != "no" 561 ${MAKEDIRTARGET} extsrc build 562.else 563 @echo "MKEXTSRC is not enabled" 564 @false 565.endif 566 567do-obsolete: .PHONY .MAKE 568 ${MAKEDIRTARGET} etc install-obsolete-lists 569 570# 571# Speedup stubs for some subtrees that don't need to run these rules. 572# (Tells <bsd.subdir.mk> not to recurse for them.) 573# 574 575.for dir in bin etc distrib games libexec regress sbin usr.bin usr.sbin tools 576includes-${dir}: .PHONY 577 @true 578.endfor 579.for dir in etc distrib regress 580install-${dir}: .PHONY 581 @true 582.endfor 583 584# 585# XXX this needs to change when distrib Makefiles are recursion compliant 586# XXX many distrib subdirs need "cd etc && make snap_pre snap_kern" first... 587# 588dependall-distrib depend-distrib all-distrib: .PHONY 589 @true 590 591.include <bsd.sys.mk> 592.include <bsd.obj.mk> 593.include <bsd.kernobj.mk> 594.include <bsd.subdir.mk> 595 596# 597# Display current make(1) parameters 598# 599params: .PHONY .MAKE 600 ${MAKEDIRTARGET} etc params 601