BUILDING revision 1.84
1BUILDING(8) NetBSD System Manager's Manual BUILDING(8) 2 3NAME 4 BUILDING -- Procedure for building NetBSD from source code. 5 6REQUIREMENTS 7 NetBSD is designed to be buildable on most POSIX-compliant host systems. 8 The basic build procedure is the same whether compiling natively (on the 9 same NetBSD architecture) or cross compiling (on another architecture or 10 OS). 11 12 This source tree contains a special subtree, ``tools'', which uses the 13 host system to create a build toolchain for the target architecture. The 14 host system must have at least C and C++ compilers in order to create the 15 toolchain (make is not required); all other tools are created as part of 16 the NetBSD build process. (See the environment variables section below 17 if you need to override or manually select your compilers.) 18 19FILES 20 Source tree layout 21 doc/BUILDING.mdoc 22 This document (in -mdoc troff format; the original copy). 23 24 BUILDING This document (in plaintext). 25 26 tools/compat/README 27 Special notes for cross-hosting a NetBSD build on non- 28 NetBSD platforms. 29 30 Makefile The main Makefile for NetBSD; should only be run for 31 native builds with an appropriately up-to-date version of 32 NetBSD make(1). (For building from out-of-date systems or 33 on a non-native host, see the build.sh shell script.) 34 35 UPDATING Special notes for updating from an earlier revision of 36 NetBSD. It is important to read this file before every 37 build of an updated source tree. 38 39 build.sh Bourne-compatible shell script used for building the host 40 build tools and the NetBSD system from scratch. Can be 41 used for both native and cross builds, and should be used 42 instead of make(1) for any source tree that is updated and 43 recompiled regularly. 44 45 crypto/dist/, dist/, gnu/dist/ 46 Sources imported verbatim from third parties, without man- 47 gling the existing build structure. Other source trees in 48 bin through usr.sbin use the NetBSD make(1) ``reachover'' 49 Makefile semantics when building these programs for a 50 native host. 51 52 distrib/, etc/ 53 Sources for items used when making a full release snap- 54 shot, such as files installed in DESTDIR/etc on the desti- 55 nation system, boot media, and release notes. 56 57 tests/, regress/ 58 Regression test harness. Can be cross-compiled, but only 59 run natively. tests/ uses the atf(7) test framework; 60 regress/ contains older tests that have not yet been 61 migrated to atf(7). 62 63 sys/ NetBSD kernel sources. 64 65 tools/ ``Reachover'' build structure for the host build tools. 66 This has a special method of determining out-of-date sta- 67 tus. 68 69 bin/ ... usr.sbin/ 70 Sources to the NetBSD userland (non-kernel) programs. If 71 any of these directories are missing, they will be skipped 72 during the build. 73 74 x11/ ``Reachover'' build structure for X11R6; the source is in 75 X11SRCDIR. 76 77 Build tree layout 78 The NetBSD build tree is described in hier(7), and the release layout is 79 described in release(7). 80 81CONFIGURATION 82 Environment variables 83 Several environment variables control the behaviour of NetBSD builds. 84 85 HOST_SH Path name to a POSIX-compliant shell. If this is not 86 set explicitly, then the default is set using heuris- 87 tics dependent on the host platform, or from the shell 88 under which build.sh is executed (if that can be deter- 89 mined), or using the first copy of sh found in PATH. 90 If the host system's /bin/sh is not POSIX-compliant, we 91 suggest that you build using commands like 92 93 HOST_SH=/path/to/working/shell 94 export HOST_SH 95 ${HOST_SH} build.sh [options] 96 97 HOST_CC Path name to C compiler used to create the toolchain. 98 99 HOST_CXX Path name to C++ compiler used to create the toolchain. 100 101 MACHINE Machine type, e.g., ``macppc''. 102 103 MACHINE_ARCH Machine architecture, e.g., ``powerpc''. 104 105 MAKE Path name to invoke make(1) as. 106 107 MAKEFLAGS Flags to invoke make(1) with. 108 109 MAKEOBJDIR Directory to use as the .OBJDIR for the current direc- 110 tory. The value is subjected to variable expansion by 111 make(1). Typical usage is to set this variable to a 112 value involving the use of `${.CURDIR:S...}' or 113 `${.CURDIR:C...}', to derive the value of .OBJDIR from 114 the value of .CURDIR. Used only if MAKEOBJDIRPREFIX is 115 not defined. MAKEOBJDIR can be provided only in the 116 environment or via the -O flag of build.sh; it cannot 117 usefully be set inside a Makefile, including mk.conf or 118 ${MAKECONF}. 119 120 MAKEOBJDIRPREFIX Top level directory of the object directory tree. If 121 specified, must be an absolute path. If this is 122 defined, ${MAKEOBJDIRPREFIX}/${.CURDIR} is used as the 123 .OBJDIR for the current directory. The current direc- 124 tory may be read only. MAKEOBJDIRPREFIX can be pro- 125 vided only in the environment or via the -M flag of 126 build.sh; it cannot usefully be set inside a Makefile, 127 including mk.conf or ${MAKECONF}. 128 129 "make" variables 130 Several variables control the behavior of NetBSD builds. Unless other- 131 wise specified, these variables may be set in either the process environ- 132 ment or the make(1) configuration file specified by MAKECONF. 133 134 BUILDID Identifier for the build. The identifier will be appended to 135 object directory names, and can be consulted in the make(1) 136 configuration file in order to set additional build parame- 137 ters, such as compiler flags. 138 139 BUILDSEED GCC uses random numbers when compiling C++ code. This vari- 140 able seeds the gcc random number generator using the -fran- 141 dom-seed flag with this value. By default, it is set to 142 NetBSD-(majorversion). Using a fixed value causes C++ bina- 143 ries to be the same when built from the same sources, result- 144 ing in identical (reproducable) builds. Additional informa- 145 tion is available in the GCC documentation of -frandom-seed. 146 147 DESTDIR Directory to contain the built NetBSD system. If set, spe- 148 cial options are passed to the compilation tools to prevent 149 their default use of the host system's /usr/include, 150 /usr/lib, and so forth. This pathname must be an absolute 151 path, and should not end with a slash (/) character. (For 152 installation into the system's root directory, set DESTDIR to 153 an empty string, not to ``/''). The directory must reside on 154 a file system which supports long file names and hard links. 155 156 Default: Empty string if USETOOLS is ``yes''; unset other- 157 wise. 158 159 Note: build.sh will provide a default of destdir.MACHINE (in 160 the top-level .OBJDIR) unless run in `expert' mode. 161 162 MAKECONF The name of the make(1) configuration file. Only settable in 163 the process environment. 164 165 Default: ``/etc/mk.conf'' 166 167 MAKEVERBOSE 168 Level of verbosity of status messages. Supported values: 169 170 0 No descriptive messages or commands executed by make(1) 171 are shown. 172 173 1 Brief messages are shown describing what is being done, 174 but the actual commands executed by make(1) are not dis- 175 played. 176 177 2 Descriptive messages are shown as above (prefixed with a 178 `#'), and ordinary commands performed by make(1) are 179 displayed. 180 181 3 In addition to the above, all commands performed by 182 make(1) are displayed, even if they would ordinarily 183 have been hidden through use of the ``@'' prefix in the 184 relevant makefile. 185 186 4 In addition to the above, commands executed by make(1) 187 are traced through use of the sh(1) ``-x'' flag. 188 189 Default: 2 190 191 MKCATPAGES Can be set to ``yes'' or ``no''. Indicates whether prefor- 192 matted plaintext manual pages will be created during a build. 193 194 Default: ``yes'' 195 196 MKCRYPTO Can be set to ``yes'' or ``no''. Indicates whether crypto- 197 graphic code will be included in a build; provided for the 198 benefit of countries that do not allow strong cryptography. 199 Will not affect use of the standard low-security password 200 encryption system, crypt(3). 201 202 Default: ``yes'' 203 204 MKDOC Can be set to ``yes'' or ``no''. Indicates whether system 205 documentation destined for DESTDIR/usr/share/doc will be 206 installed during a build. 207 208 Default: ``yes'' 209 210 MKHTML Can be set to ``yes'' or ``no''. Indicates whether prefor- 211 matted HTML manual pages will be built and installed 212 213 Default: ``yes'' 214 215 MKHOSTOBJ Can be set to ``yes'' or ``no''. If set to ``yes'', then for 216 programs intended to be run on the compile host, the name, 217 release, and architecture of the host operating system will 218 be suffixed to the name of the object directory created by 219 ``make obj''. (This allows multiple host systems to compile 220 NetBSD for a single target.) If set to ``no'', then programs 221 built to be run on the compile host will use the same object 222 directory names as programs built to be run on the target. 223 224 Default: ``no'' 225 226 MKINFO Can be set to ``yes'' or ``no''. Indicates whether GNU Info 227 files, used for the documentation for most of the compilation 228 tools, will be created and installed during a build. 229 230 Default: ``yes'' 231 232 MKLINT Can be set to ``yes'' or ``no''. Indicates whether lint(1) 233 will be run against portions of the NetBSD source code during 234 the build, and whether lint libraries will be installed into 235 DESTDIR/usr/libdata/lint. 236 237 Default: ``yes'' 238 239 MKMAN Can be set to ``yes'' or ``no''. Indicates whether manual 240 pages will be installed during a build. 241 242 Default: ``yes'' 243 244 MKNLS Can be set to ``yes'' or ``no''. Indicates whether Native 245 Language System locale zone files will be compiled and 246 installed during a build. 247 248 Default: ``yes'' 249 250 MKOBJ Can be set to ``yes'' or ``no''. Indicates whether object 251 directories will be created when running ``make obj''. If 252 set to ``no'', then all built files will be located inside 253 the regular source tree. 254 255 Default: ``yes'' 256 257 Note that setting MKOBJ to ``no'' is not recommended and may 258 cause problems when updating the tree with cvs(1). 259 260 MKPIC Can be set to ``yes'' or ``no''. Indicates whether shared 261 objects and libraries will be created and installed during a 262 build. If set to ``no'', the entire built system will be 263 statically linked. 264 265 Default: Platform dependent. As of this writing, all plat- 266 forms except sh3 default to ``yes''. 267 268 MKPICINSTALL 269 Can be set to ``yes'' or ``no''. Indicates whether the ar(1) 270 format libraries (lib*_pic.a), used to generate shared 271 libraries, are installed during a build. 272 273 Default: ``yes'' 274 275 MKPROFILE Can be set to ``yes'' or ``no''. Indicates whether profiled 276 libraries (lib*_p.a) will be built and installed during a 277 build. 278 279 Default: ``yes''; however, some platforms turn off MKPROFILE 280 by default at times due to toolchain problems with profiled 281 code. 282 283 MKSHARE Can be set to ``yes'' or ``no''. Indicates whether files 284 destined to reside in DESTDIR/usr/share will be built and 285 installed during a build. If set to ``no'', then all of 286 MKCATPAGES, MKDOC, MKINFO, MKMAN, and MKNLS will be set to 287 ``no'' unconditionally. 288 289 Default: ``yes'' 290 291 MKSTRIPIDENT 292 Can be set to ``yes'' or ``no''. Indicates whether program 293 binaries and shared libraries should be built to include RCS 294 IDs for use with ident(1). 295 296 Default: ``no'' 297 298 MKSUBPIXEL Can be set to ``yes'' or ``no''. For X builds, decides if 299 subpixel rendering code in FreeType is turned on. Turned off 300 by default because of patent issues. 301 302 Default: ``no'' 303 304 MKTTINTERP Can be set to ``yes'' or ``no''. For X builds, decides if 305 the TrueType bytecode interpreter is turned on. See 306 http://www.freetype.org/patents.html for details. 307 308 Default: ``no'' 309 310 MKUNPRIVED Can be set to ``yes'' or ``no''. Indicates whether an 311 unprivileged install will occur. The user, group, permis- 312 sions, and file flags, will not be set on the installed 313 items; instead the information will be appended to a file 314 called METALOG in DESTDIR. The contents of METALOG are used 315 during the generation of the distribution tar files to ensure 316 that the appropriate file ownership is stored. 317 318 Default: ``no'' 319 320 MKUPDATE Can be set to ``yes'' or ``no''. Indicates whether all 321 install operations intended to write to DESTDIR will compare 322 file timestamps before installing, and skip the install phase 323 if the destination files are up-to-date. This also has 324 implications on full builds (see next subsection). 325 326 Default: ``no'' 327 328 MKX11 Can be set to ``yes'' or ``no''. Indicates whether X11 is 329 built from X11SRCDIR. 330 331 Default: ``no'' 332 333 TOOLDIR Directory to hold the host tools, once built. If specified, 334 must be an absolute path. This directory should be unique to 335 a given host system and NetBSD source tree. (However, multi- 336 ple targets may share the same TOOLDIR; the target-dependent 337 files have unique names.) If unset, a default based on the 338 uname(1) information of the host platform will be created in 339 the .OBJDIR of src. 340 341 Default: Unset. 342 343 USETOOLS Indicates whether the tools specified by TOOLDIR should be 344 used as part of a build in progress. Must be set to ``yes'' 345 if cross-compiling. 346 347 yes Use the tools from TOOLDIR. 348 349 no Do not use the tools from TOOLDIR, but refuse to build 350 native compilation tool components that are version- 351 specific for that tool. 352 353 never Do not use the tools from TOOLDIR, even when building 354 native tool components. This is similar to the tradi- 355 tional NetBSD build method, but does not verify that 356 the compilation tools in use are up-to-date enough in 357 order to build the tree successfully. This may cause 358 build or runtime problems when building the whole 359 NetBSD source tree. 360 361 Default: ``yes'', unless TOOLCHAIN_MISSING is set to ``yes''. 362 363 USETOOLS is also set to ``no'' when using <bsd.*.mk> outside 364 the NetBSD source tree. 365 366 X11SRCDIR Directory containing the X11R6 source. If specified, must be 367 an absolute path. The main X11R6 source is found in 368 X11SRCDIR/xfree/xc. 369 370 Default: ``/usr/xsrc'' 371 372 X11FLAVOUR The style of X11 cross-built, set to either ``Xorg'' or 373 ``XFree86''. 374 375 Default: ``Xorg'' on amd64, i386, macppc, shark and sparc64 376 platforms, ``XFree86'' on everything else. 377 378 "make" variables for full builds 379 These variables only affect the top level ``Makefile'' and do not affect 380 manually building subtrees of the NetBSD source code. 381 382 INSTALLWORLDDIR Location for the ``make installworld'' target to install 383 to. If specified, must be an absolute path. 384 385 Default: ``/'' 386 387 MKOBJDIRS Can be set to ``yes'' or ``no''. Indicates whether 388 object directories will be created automatically (via a 389 ``make obj'' pass) at the start of a build. 390 391 Default: ``no'' 392 393 If using build.sh, the default is ``yes''. This may be 394 set back to ``no'' by giving build.sh the -o option. 395 396 MKUPDATE Can be set to ``yes'' or ``no''. If set, then in addi- 397 tion to the effects described for MKUPDATE=yes above, 398 this implies the effects of NOCLEANDIR (i.e., ``make 399 cleandir'' is avoided). 400 401 Default: ``no'' 402 403 If using build.sh, this may be set by giving the -u 404 option. 405 406 NBUILDJOBS Now obsolete. Use the make(1) option -j, instead. See 407 below. 408 409 Default: Unset. 410 411 NOCLEANDIR If set, avoids the ``make cleandir'' phase of a full 412 build. This has the effect of allowing only changed 413 files in a source tree to be recompiled. This can speed 414 up builds when updating only a few files in the tree. 415 416 Default: Unset. 417 418 See also MKUPDATE. 419 420 NODISTRIBDIRS If set, avoids the ``make distrib-dirs'' phase of a full 421 build. This skips running mtree(8) on DESTDIR, useful 422 on systems where building as an unprivileged user, or 423 where it is known that the system-wide mtree files have 424 not changed. 425 426 Default: Unset. 427 428 NOINCLUDES If set, avoids the ``make includes'' phase of a full 429 build. This has the effect of preventing make(1) from 430 thinking that some programs are out-of-date simply 431 because the system include files have changed. However, 432 this option should not be used when updating the entire 433 NetBSD source tree arbitrarily; it is suggested to use 434 MKUPDATE=yes instead in that case. 435 436 Default: Unset. 437 438 RELEASEDIR If set, specifies the directory to which a release(7) 439 layout will be written at the end of a ``make release''. 440 If specified, must be an absolute path. 441 442 Default: Unset. 443 444 Note: build.sh will provide a default of releasedir (in 445 the top-level .OBJDIR) unless run in `expert' mode. 446 447BUILDING 448 "make" command line options 449 This is not a summary of all the options available to make(1); only the 450 options used most frequently with NetBSD builds are listed here. 451 452 -j njob Run up to njob make(1) subjobs in parallel. Makefiles should 453 use .WAIT or have explicit dependencies as necessary to 454 enforce build ordering. 455 456 -m dir Specify the default directory for searching for system Make- 457 file segments, mainly the <bsd.*.mk> files. When building any 458 full NetBSD source tree, this should be set to the 459 ``share/mk'' directory in the source tree. This is set auto- 460 matically when building from the top level, or when using 461 build.sh. 462 463 -n Display the commands that would have been executed, but do not 464 actually execute them. This will still cause recursion to 465 take place. 466 467 -V var Print make(1)'s idea of the value of var. Does not build any 468 targets. 469 470 var=value Set the variable var to value, overriding any setting speci- 471 fied by the process environment, the MAKECONF configuration 472 file, or the system Makefile segments. 473 474 "make" targets 475 These default targets may be built by running make(1) in any subtree of 476 the NetBSD source code. It is recommended that none of these be used 477 from the top level Makefile; as a specific exception, ``make obj'' and 478 ``make cleandir'' are useful in that context. 479 480 all Build programs, libraries, and preformatted documentation. 481 482 clean Remove program and library object code files. 483 484 cleandir Same as clean, but also remove preformatted documentation, 485 dependency files generated by ``make depend'', and any other 486 files known to be created at build time. 487 488 depend Create dependency files (.depend) containing more detailed 489 information about the dependencies of source code on header 490 files. Allows programs to be recompiled automatically when a 491 dependency changes. 492 493 dependall Does a ``make depend'' immediately followed by a ``make all''. 494 This improves cache locality of the build since both passes 495 read the source files in their entirety. 496 497 distclean Synonym for cleandir. 498 499 includes Build and install system header files. Typically needed 500 before any system libraries or programs can be built. 501 502 install Install programs, libraries, and documentation into DESTDIR. 503 Few files will be installed to DESTDIR/dev, DESTDIR/etc, 504 DESTDIR/root or DESTDIR/var in order to prevent user supplied 505 configuration data from being overwritten. 506 507 lint Run lint(1) against the C source code, where appropriate, and 508 generate system-installed lint libraries. 509 510 obj Create object directories to be used for built files, instead 511 of building directly in the source tree. 512 513 tags Create ctags(1) searchable function lists usable by the ex(1) 514 and vi(1) text editors. 515 516 "make" targets for the top level 517 Additional make(1) targets are usable specifically from the top source 518 level to facilitate building the entire NetBSD source tree. 519 520 build Build the entire NetBSD system (except the kernel). This 521 orders portions of the source tree such that prerequisites 522 will be built in the proper order. 523 524 distribution Do a ``make build'', and then install a full distribution 525 (which does not include a kernel) into DESTDIR, including 526 files in DESTDIR/dev, DESTDIR/etc, DESTDIR/root and 527 DESTDIR/var. 528 529 buildworld As per ``make distribution'', except that it ensures that 530 DESTDIR is not the root directory. 531 532 installworld Install the distribution from DESTDIR to INSTALLWORLDDIR, 533 which defaults to the root directory. Ensures that 534 INSTALLWORLDDIR is not the root directory if cross compil- 535 ing. 536 537 The INSTALLSETS environment variable may be set to a list 538 of distribution sets to be installed. By default, all sets 539 except ``etc'' and ``xetc'' are installed, so most files in 540 INSTALLWORLDDIR/etc will not be installed or modified. 541 542 Note: Before performing this operation with 543 INSTALLWORLDDIR=/, it is highly recommended that you 544 upgrade your kernel and reboot. After performing this 545 operation, it is recommended that you use etcupdate(8) to 546 update files in INSTALLWORLDDIR/etc and that you use 547 postinstall(8) to check for inconsistencies (and possibly 548 to fix them). 549 550 sets Create distribution sets from DESTDIR into 551 RELEASEDIR/RELEASEMACHINEDIR/binary/sets. Should be run 552 after ``make distribution'', as ``make build'' alone does 553 not install all of the required files. 554 555 sourcesets Create source sets of the source tree into 556 RELEASEDIR/source/sets. 557 558 syspkgs Create syspkgs from DESTDIR into 559 RELEASEDIR/RELEASEMACHINEDIR/binary/syspkgs. Should be run 560 after ``make distribution'', as ``make build'' alone does 561 not install all of the required files. 562 563 release Do a ``make distribution'', build kernels, distribution 564 media, and install sets (this as per ``make sets''), and 565 then package the system into a standard release layout as 566 described by release(7). This requires that RELEASEDIR be 567 set (see above). 568 569 iso-image Create a NetBSD installation CD-ROM image in the 570 RELEASEDIR/iso directory. The CD-ROM file system will have 571 a layout as described in release(7). 572 573 For most machine types, the CD-ROM will be bootable, and 574 will automatically run the sysinst(8) menu-based installa- 575 tion program, which can be used to install or upgrade a 576 NetBSD system. Bootable CD-ROMs also contain tools that 577 may be useful in repairing a damaged NetBSD installation. 578 579 Before ``make iso-image'' is attempted, RELEASEDIR must be 580 populated by ``make release'' or equivalent. 581 582 Note that other, smaller, CD-ROM images may be created in 583 the RELEASEDIR/RELEASEMACHINEDIR/installation/cdrom direc- 584 tory by ``make release''. These smaller images usually 585 contain the same tools as the larger images in 586 RELEASEDIR/iso, but do not contain additional content such 587 as the distribution sets. 588 589 Note that the mac68k port still uses an older method of 590 creating CD-ROM images. This requires the mkisofs(1) util- 591 ity, which is not part of NetBSD, but which can be 592 installed from pkgsrc/sysutils/cdrtools. 593 594 iso-image-source 595 Create a NetBSD installation CD-ROM image in the 596 RELEASEDIR/iso directory. The CD-ROM file system will have 597 a layout as described in release(7). It will have top 598 level directories for the machine type and source. 599 600 For most machine types, the CD-ROM will be bootable, and 601 will automatically run the sysinst(8) menu-based installa- 602 tion program, which can be used to install or upgrade a 603 NetBSD system. Bootable CD-ROMs also contain tools that 604 may be useful in repairing a damaged NetBSD installation. 605 606 Before ``make iso-image-source'' is attempted, RELEASEDIR 607 must be populated by ``make sourcesets release'' or equiva- 608 lent. 609 610 Note that other, smaller, CD-ROM images may be created in 611 the RELEASEDIR/RELEASEMACHINEDIR/installation/cdrom direc- 612 tory by ``make release''. These smaller images usually 613 contain the same tools as the larger images in 614 RELEASEDIR/iso, but do not contain additional content such 615 as the distribution sets. 616 617 Note that the mac68k port still uses an older method of 618 creating CD-ROM images. This requires the mkisofs(1) util- 619 ity, which is not part of NetBSD, but which can be 620 installed from pkgsrc/sysutils/cdrtools. 621 622 regression-tests 623 Can only be run after building the regression tests in the 624 directory ``regress''. Runs those compiled regression 625 tests on the local host. Note that most tests are now man- 626 aged instead using atf(7); this target should probably run 627 those as well but currently does not. 628 629 The "build.sh" script 630 This script file is a Bourne shell script designed to build the entire 631 NetBSD system on any host with a Bourne shell in /bin/sh, including many 632 that are not POSIX compliant. Note that if a host system's /bin/sh is 633 unusually old and broken, the Korn Shell (/bin/ksh), if available, may be 634 a usable alternative. 635 636 All cross-compile builds, and most native builds, of the entire system 637 should make use of build.sh rather than just running ``make''. This way, 638 the make(1) program will be bootstrapped properly, in case the host sys- 639 tem has an older or incompatible ``make'' program. 640 641 When compiling the entire system via build.sh, many make(1) variables are 642 set for you in order to help encapsulate the build process. In the list 643 of options below, variables that are automatically set by build.sh are 644 noted where applicable. 645 646 The following operations are supported by build.sh: 647 648 build Build the system as per ``make build''. Before the main 649 part of the build commences, this command runs the obj 650 operation (unless the -o option is given), ``make 651 cleandir'' (unless the -u option is given), and the tools 652 operation. 653 654 distribution Build a full distribution as per ``make distribution''. 655 This command first runs the build operation. 656 657 release Build a full release as per ``make release''. This command 658 first runs the distribution operation. 659 660 makewrapper Create the nbmake-MACHINE wrapper. This operation is auto- 661 matically performed for any of the other operations. 662 663 cleandir Perform ``make cleandir''. 664 665 obj Perform ``make obj''. 666 667 tools Build and install the host tools from src/tools. This com- 668 mand will first run ``make obj'' and ``make cleandir'' in 669 the tools subdirectory unless the -o or -u options (respec- 670 tively) are given. 671 672 install=idir Install the contents of DESTDIR to idir, using ``make 673 installworld''. Note that files that are part of the 674 ``etc'' or ``xetc'' sets will not be installed. 675 676 kernel=kconf Build a new kernel. The kconf argument is the name of a 677 configuration file suitable for use by config(1). If kconf 678 does not contain any `/' characters, the configuration file 679 is expected to be found in the KERNCONFDIR directory, which 680 is typically sys/arch/MACHINE/conf. The new kernel will be 681 built in a subdirectory of KERNOBJDIR, which is typically 682 sys/arch/MACHINE/compile or an associated object directory. 683 684 This command does not imply the tools command; run the 685 tools command first unless it is certain that the tools 686 already exist and are up to date. 687 688 This command will run ``make cleandir'' on the kernel in 689 question first unless the -u option is given. 690 691 releasekernel=kconf 692 Install a gzip(1)ed copy of the kernel previously built by 693 kernel=kconf into 694 RELEASEDIR/RELEASEMACHINEDIR/binary/kernel, usually as 695 netbsd-kconf.gz, although the ``netbsd'' prefix is deter- 696 mined from the ``config'' directives in kconf. 697 698 sets Perform ``make sets''. 699 700 sourcesets Perform ``make sourcesets''. 701 702 syspkgs Perform ``make syspkgs''. 703 704 iso-image Perform ``make iso-image''. 705 706 iso-image-source 707 Perform ``make iso-image-source''. 708 709 The following command line options alter the behaviour of the build.sh 710 operations described above: 711 712 -a arch Set the value of MACHINE_ARCH to arch. 713 714 -B buildid 715 Set the value of BUILDID to buildid. This will also append the 716 build identifier to the name of the ``make'' wrapper script so 717 that the resulting name is of the form 718 ``nbmake-MACHINE-BUILDID''. 719 720 -C cdextras 721 Set the value of CDEXTRA to cdextras which is a space-separated 722 list of files or directories which will be added in order to 723 the CD-ROM image when used in conjunction with ``iso-image'' or 724 ``iso-image-source''. Files will be added to the root of the 725 CD-ROM image, whereas directories will be copied recursively. 726 If relative paths are specified, they will be converted to 727 absolute paths before being used. 728 729 -D dest Set the value of DESTDIR to dest. If a relative path is speci- 730 fied, it will be converted to an absolute path before being 731 used. 732 733 -E Set `expert' mode. This overrides various sanity checks, and 734 allows: DESTDIR does not have to be set to a non-root path for 735 builds, and MKUNPRIVED=yes does not have to be set when build- 736 ing as a non-root user. 737 738 Note: It is highly recommended that you know what you are doing 739 when you use this option. 740 741 -h Print a help message. 742 743 -j njob Run up to njob make(1) subjobs in parallel; passed through to 744 make(1). If you see failures for reasons other than running 745 out of memory while using build.sh with -j, please save com- 746 plete build logs so the failures can be analyzed. 747 748 To achieve the fastest builds, -j values between (1 + the num- 749 ber of CPUs) and (2 * the number of CPUs) are recommended. Use 750 lower values on machines with limited memory or I/O bandwidth. 751 752 -M obj Set MAKEOBJDIRPREFIX to obj. For instance, if the source 753 directory is /usr/src, a setting of ``-M /usr/obj'' will place 754 build-time files under /usr/obj/usr/src/bin, 755 /usr/obj/usr/src/lib, /usr/obj/usr/src/usr.bin, and so forth. 756 If a relative path is specified, it will be converted to an 757 absolute path before being used. Unsets MAKEOBJDIR. See ``-O 758 -obj'' for more information. 759 760 -m mach Set the value of MACHINE to mach, except in some special cases 761 listed below. This will also override any value of 762 MACHINE_ARCH in the process environment with a value deduced 763 from mach, unless -a is specified. All cross builds require 764 -m, but if unset on a NetBSD host, the host's value of MACHINE 765 will be detected and used automatically. 766 767 Some machines support multiple values for MACHINE_ARCH. The 768 following special cases for the mach argument are defined to 769 set the listed values of MACHINE and MACHINE_ARCH: 770 771 mach MACHINE MACHINE_ARCH 772 evbarm evbarm (not set) 773 evbarm-eb evbarm armeb 774 evbarm-el evbarm arm 775 evbmips evbmips (not set) 776 evbmips-eb evbmips mipseb 777 evbmips-el evbmips mipsel 778 evbsh3 evbsh3 (not set) 779 evbsh3-eb evbsh3 sh3eb 780 evbsh3-el evbsh3 sh3el 781 sbmips sbmips (not set) 782 sbmips-eb sbmips mipseb 783 sbmips-el sbmips mipsel 784 785 -N noiselevel 786 Set the ``noisyness'' level of the build, by setting 787 MAKEVERBOSE to noiselevel. 788 789 -n Show the commands that would be executed by build.sh, but do 790 not make any changes. This is similar in concept to ``make 791 -n''. 792 793 -O obj Create an appropriate transform macro for MAKEOBJDIR that will 794 place the built object files under obj. For instance, a set- 795 ting of ``-O /usr/obj'' will place build-time files under 796 /usr/obj/bin, /usr/obj/lib, /usr/obj/usr.bin, and so forth. If 797 a relative path is specified, it will be converted to an abso- 798 lute path before being used. Unsets MAKEOBJDIRPREFIX. 799 800 In normal use, exactly one of the -M or -O options should be 801 specified. If neither -M nor -O is specified, then a default 802 object directory will be chosen according to rules in 803 <bsd.obj.mk>. Relying on this default is not recommended 804 because it is determined by complex rules that are influenced 805 by the values of several variables and by the location of the 806 source directory. 807 808 -o Set the value of MKOBJDIRS to ``no''. Otherwise, it will be 809 automatically set to ``yes''. This default is opposite to the 810 behaviour when not using build.sh. 811 812 -R rel Set the value of RELEASEDIR to rel. If a relative path is 813 specified, it will be converted to an absolute path before 814 being used. 815 816 -r Remove the contents of DESTDIR and TOOLDIR before building 817 (provides a clean starting point). This will skip deleting 818 DESTDIR if building on a native system to the root directory. 819 820 -S seed Change the value of BUILDSEED to seed. This should rarely be 821 necessary. 822 823 -T tools Set the value of TOOLDIR to tools. If a relative path is spec- 824 ified, it will be converted to an absolute path before being 825 used. If set, the bootstrap ``make'' will only be rebuilt if 826 the source files for make(1) have changed. 827 828 -U Set MKUNPRIVED=yes. 829 830 -u Set MKUPDATE=yes. 831 832 -V var=[value] 833 Set the environment variable var to an optional value. This is 834 propagated to the nbmake wrapper. 835 836 -w wrapper 837 Create the nbmake wrapper script (see below) in a custom loca- 838 tion, specified by wrapper. This allows, for instance, to 839 place the wrapper in PATH automatically. Note that wrapper is 840 the full name of the file, not just a directory name. If a 841 relative path is specified, it will be converted to an absolute 842 path before being used. 843 844 -X x11src 845 Set the value of X11SRCDIR to x11src. If a relative path is 846 specified, it will be converted to an absolute path before 847 being used. 848 849 -x Set MKX11=yes. 850 851 -Z var Unset ("zap") the environment variable var. This is propagated 852 to the nbmake wrapper. 853 854 The "nbmake-MACHINE" wrapper script 855 If using the build.sh script to build NetBSD, a nbmake-MACHINE script 856 will be created in TOOLDIR/bin upon the first build to assist in building 857 subtrees on a cross-compile host. 858 859 nbmake-MACHINE can be invoked in lieu of make(1), and will instead call 860 the up-to-date version of ``nbmake'' installed into TOOLDIR/bin with sev- 861 eral key variables pre-set, including MACHINE, MACHINE_ARCH, and TOOLDIR. 862 nbmake-MACHINE will also set variables specified with -V, and unset vari- 863 ables specified with -Z. 864 865 This script can be symlinked into a directory listed in PATH, or called 866 with an absolute path. 867 868EXAMPLES 869 1. % ./build.sh [options] tools kernel=GENERIC 870 871 Build a new toolchain, and use the new toolchain to configure and 872 build a new GENERIC kernel. 873 874 2. % ./build.sh [options] -U distribution 875 876 Using unprivileged mode, build a complete distribution to a DESTDIR 877 directory that build.sh selects (and will display). 878 879 3. # ./build.sh [options] -U install=/ 880 881 As root, install to / the distribution that was built by example 2. 882 Even though this is run as root, -U is required so that the permis- 883 sions stored in DESTDIR/METALOG are correctly applied to the files 884 as they're copied to /. 885 886 4. % ./build.sh [options] -U -u release 887 888 Using unprivileged mode, build a complete release to DESTDIR and 889 RELEASEDIR directories that build.sh selects (and will display). 890 MKUPDATE=yes (-u) is set to prevent the ``make cleandir'', so that 891 if this is run after example 2, it doesn't need to redo that portion 892 of the release build. 893 894OBSOLETE VARIABLES 895 NBUILDJOBS Use the make(1) option -j instead. 896 897 USE_NEW_TOOLCHAIN 898 The new toolchain is now the default. To disable, use 899 TOOLCHAIN_MISSING=yes. 900 901SEE ALSO 902 make(1), hier(7), release(7), etcupdate(8), postinstall(8), sysinst(8), 903 pkgsrc/sysutils/cdrtools 904 905HISTORY 906 The build.sh based build scheme was introduced for NetBSD 1.6 as 907 USE_NEW_TOOLCHAIN, and re-worked to TOOLCHAIN_MISSING after that. 908 909NetBSD May 1, 2009 NetBSD 910