BUILDING revision 1.5
1BUILDING(8) NetBSD System Manager's Manual BUILDING(8) 2 3NAME 4 BUILDING - Procedure for building NetBSD from source code. 5 6STATUS 7 This document is a work-in-progress. As such, the information described 8 here may not match the reality of the build system as of this writing. 9 Once this document is completely in sync with reality, this paragraph 10 will be removed. 11 12 Discrepancies between this documentation and the current reality of im- 13 plementation are noted specially, as with the note below: 14 15 Note: This document applies only to platforms which use the new toolchain 16 as indicated by the default setting of USE_NEW_TOOLCHAIN in <bsd.own.mk>. 17 Platforms which have not yet been switched to the new toolchain should 18 continue building traditionally, using the notes specified in the file 19 UPDATING. 20 21REQUIREMENTS 22 NetBSD is designed to be buildable on most POSIX-compliant host systems. 23 The basic build procedure is the same whether compiling natively (on the 24 same NetBSD architecture) or cross compiling (on another architecture or 25 OS). 26 27 This source tree contains a special subtree, ``tools'', which uses the 28 host system to create a build toolchain for the target architecture. The 29 host system must have at least C and C++ compilers in order to create the 30 toolchain (make is not required); all other tools are created as part of 31 the NetBSD build process. 32 33 Note: A couple host toolchain components are not yet available in 34 the tools directory. Also, some tools use non-POSIX, non-ANSI C 35 extensions and need to be standardized. As a result, cross-compil- 36 ing from systems other than NetBSD is not currently supported. 37 38FILES 39 Source tree layout 40 41 BUILDING.mdoc This document (in -mdoc troff format; the original copy). 42 43 BUILDING This document (in plaintext). 44 45 Makefile The main Makefile for NetBSD; should only be run for na- 46 tive builds with an appropriately up-to-date version of 47 NetBSD make(1). (For building from out-of-date systems or 48 on a non-native host, see the build.sh shell script.) 49 50 UPDATING Special notes for updating from an earlier revision of 51 NetBSD. It is important to read this file before every 52 build of an updated source tree. 53 54 build.sh Bourne-compatible shell script used for building the host 55 build tools and the NetBSD system from scratch. Can be 56 used for both native and cross builds, and should be used 57 instead of make(1) for any source tree that is updated and 58 recompiled regularly. 59 60 crypto/dist/, dist/, gnu/dist/ 61 Sources imported verbatim from third parties, without man- 62 gling the existing build structure. Other source trees in 63 bin through usr.sbin use the NetBSD make(1) ``reachover'' 64 Makefile semantics when building these programs for a na- 65 tive host. 66 67 distrib/, etc/ 68 Sources for items used when making a full release snap- 69 shot, such as files installed in /etc on the destination 70 system, boot media, and release notes. 71 72 regress/ Regression test harness. Can be cross-compiled, but only 73 run natively. 74 75 sys/ NetBSD kernel sources. 76 77 tools/ ``Reachover'' build structure for the host build tools. 78 This has a special method of determining out-of-date sta- 79 tus. 80 81 bin/ ... usr.sbin/ 82 Sources to the NetBSD userland (non-kernel) programs. If 83 any of these directories are missing, they will be skipped 84 during the build. 85 86 Build tree layout 87 The NetBSD build tree is described in hier(7), and the release layout is 88 described in release(7). 89 90CONFIGURATION 91 "make" variables 92 Several variables control the behavior of NetBSD builds. Unless other- 93 wise specified, these variables may be set in either the process environ- 94 ment or the make(1) configuration file specified by MAKECONF. 95 96 DESTDIR Directory to contain the built NetBSD system. If set, spe- 97 cial options are passed to the compilation tools to prevent 98 their default use of the host system's /usr/include, 99 /usr/lib, and so forth. This pathname should not end with a 100 slash (/) character (for installation into the system's root 101 directory, set DESTDIR to an empty string). 102 103 Default: Empty string if USETOOLS is ``yes''; unset other- 104 wise. 105 106 MAKECONF The name of the make(1) configuration file. Only settable in 107 the process environment. 108 109 Default: ``/etc/mk.conf'' 110 111 MKCATPAGES Can be set to ``yes'' or ``no''. Indicates whether prefor- 112 matted plaintext manual pages will be created during a build. 113 114 Default: ``yes'' 115 116 MKCRYPTO Can be set to ``yes'' or ``no''. Indicates whether crypto- 117 graphic code will be included in a build; provided for the 118 benefit of countries that do not allow strong cryptography. 119 Will not affect use of the standard low-security password en- 120 cryption system, crypt(3). 121 122 Default: ``yes'' 123 124 MKDOC Can be set to ``yes'' or ``no''. Indicates whether system 125 documentation destined for /usr/share/doc will be installed 126 during a build. 127 128 Default: ``yes'' 129 130 MKHOSTOBJ Can be set to ``yes'' or ``no''. If set to ``yes'', then for 131 programs intended to be run on the compile host, the name, 132 release, and architecture of the host operating system will 133 be suffixed to the name of the object directory created by 134 ``make obj''. (This allows multiple host systems to compile 135 NetBSD for a single target.) If set to ``no'', then programs 136 built to be run on the compile host will use the same object 137 directory names as programs built to be run on the target. 138 139 Default: ``no'' 140 141 MKINFO Can be set to ``yes'' or ``no''. Indicates whether GNU Info 142 files, used for the documentation for most of the compilation 143 tools, will be created and installed during a build. 144 145 Default: ``yes'' 146 147 MKLINT Can be set to ``yes'' or ``no''. Indicates whether lint(1) 148 will be run against portions of the NetBSD source code during 149 the build, and whether lint libraries will be installed into 150 /usr/libdata/lint. 151 152 Default: ``yes'' 153 154 MKMAN Can be set to ``yes'' or ``no''. Indicates whether manual 155 pages will be installed during a build. 156 157 Default: ``yes'' 158 159 MKNLS Can be set to ``yes'' or ``no''. Indicates whether Native 160 Language System locale zone files will be compiled and in- 161 stalled during a build. 162 163 Default: ``yes'' 164 165 MKOBJ Can be set to ``yes'' or ``no''. Indicates whether object 166 directories will be created when running ``make obj''. If 167 set to ``no'', then all built files will be located inside 168 the regular source tree. 169 170 Default: ``yes'' 171 172 MKPIC Can be set to ``yes'' or ``no''. Indicates whether shared 173 objects and libraries will be created and installed during a 174 build. If set to ``no'', the entire built system will be 175 statically linked. 176 177 Default: Platform dependent. As of this writing, all plat- 178 forms except sh3 default to ``yes''. 179 180 MKPICINSTALL 181 Can be set to ``yes'' or ``no''. Indicates whether the ar(1) 182 format libraries (lib*_pic.a), used to generate shared li- 183 braries, are installed during a build. 184 185 Default: ``yes'' 186 187 MKPROFILE Can be set to ``yes'' or ``no''. Indicates whether profiled 188 libraries (lib*_p.a) will be built and installed during a 189 build. 190 191 Default: ``yes''; however, some platforms turn off MKPROFILE 192 by default at times due to toolchain problems with profiled 193 code. 194 195 MKSHARE Can be set to ``yes'' or ``no''. Indicates whether files 196 destined to reside in /usr/share will be built and installed 197 during a build. If set to ``no'', then all of MKCATPAGES, 198 MKDOC, MKINFO, MKMAN, and MKNLS will be set to ``no'' uncon- 199 ditionally. 200 201 Default: ``yes'' 202 203 TOOLDIR Directory to hold the host tools, once built. This directory 204 should be unique to a given host system and NetBSD source 205 tree. (However, multiple targets may share the same TOOLDIR; 206 the target-dependent files have unique names.) If unset, a 207 default based on the uname(1) information of the host plat- 208 form will be created in the .OBJDIR of src/tools. 209 210 Default: Unset. 211 212 UPDATE If set, then all install operations intended to write to 213 DESTDIR will compare file timestamps before installing, and 214 skip the install phase if the destination files are up-to- 215 date. This also has implications on full builds (see next 216 subsection). 217 218 Default: Unset. 219 220 USETOOLS Indicates whether the tools specified by TOOLDIR should be 221 used as part of a build in progress. Must be set to ``yes'' 222 if cross-compiling. 223 224 yes Use the tools from TOOLDIR. 225 226 no Do not use the tools from TOOLDIR, but refuse to build 227 native compilation tool components that are version- 228 specific for that tool. 229 230 never Do not use the tools from TOOLDIR, even when building 231 native tool components. This is similar to the tradi- 232 tional NetBSD build method, but does not verify that 233 the compilation tools in use are up-to-date enough in 234 order to build the tree successfully. This may cause 235 build or runtime problems when building the whole 236 NetBSD source tree. 237 238 Default: ``yes'' if building all or part of a whole NetBSD 239 source tree (detected automatically); ``no'' otherwise (to 240 preserve traditional semantics of the <bsd.*.mk> make(1) in- 241 clude files). 242 243 "make" variables for full builds 244 These variables only affect the top level ``Makefile'' and do not manual- 245 ly building subtrees of the NetBSD source code. 246 247 MKOBJDIRS Can be set to ``yes'' or ``no''. Indicates whether object 248 directories will be created automatically (via a ``make 249 obj'' pass) at the start of a build. 250 251 Default: ``yes'' 252 253 NBUILDJOBS If set, specifies the number of parallel make(1) processes 254 that should be run simultaneously. This can speed up 255 builds on SMP machines, or machines with much more CPU 256 power than I/O availability. This should be used instead 257 of the make(1) option -j, in order to ensure proper order- 258 ing of build components. 259 260 Default: Unset. 261 262 NOCLEANDIR If set, avoids the ``make cleandir'' phase of a full 263 build. This has the effect of allowing only changed files 264 in a source tree to be recompiled. This can speed up 265 builds when updating only a few files in the tree. 266 267 Default: Unset. 268 269 NODISTRIBDIRS If set, avoids the ``make distrib-dirs'' phase of a full 270 build. This skips running mtree(8) on DESTDIR, useful on 271 systems where building as an unprivileged user, or where 272 it is known that the system-wide mtree files have not 273 changed. 274 275 Default: Unset. 276 277 NOINCLUDES If set, avoids the ``make includes'' phase of a full 278 build. This has the effect of preventing make(1) from 279 thinking that some programs are out-of-date simply because 280 the system include files have changed. However, this op- 281 tion should not be used when updating the entire NetBSD 282 source tree arbitrarily; it is suggested to use UPDATE in 283 that case. 284 285 Default: Unset. 286 287 RELEASEDIR If set, specifies the directory to which a release(7) lay- 288 out will be written at the end of a ``make release''. 289 290 Default: Unset. 291 292 UPDATE If set, then in addition to the effects described for UP- 293 DATE above, this implies the effects of NOCLEANDIR. 294 295BUILDING 296 "make" command line options 297 This is only a summary of options available to make(1); only the options 298 used most frequently with NetBSD builds are listed here. 299 300 -m dir Specify the default directory for searching for system Make- 301 file segments, mainly the <bsd.*.mk> files. When building any 302 full NetBSD source tree, this should be set to the 303 ``share/mk'' directory in the source tree. (This is set auto- 304 matically when building from the top level.) 305 306 -n Display the commands that would have been executed, but do not 307 actually execute them. This will still cause recursion to 308 take place. 309 310 -v var Print make(1)'s idea of the value of var. Does not build any 311 targets. 312 313 var=value Set the variable var to value, overriding any setting speci- 314 fied by the process environment, the MAKECONF configuration 315 file, or the system Makefile segments. 316 317 "make" targets 318 These default targets may be built by running make(1) in any subtree of 319 the NetBSD source code. It is recommended that none of these be used 320 from the top level Makefile; as a specific exception, ``make obj'' and 321 ``make cleandir'' are useful in that context. 322 323 all Build programs, libraries, and preformatted documentation. 324 325 clean Remove program and library object code files. 326 327 cleandir Same as clean, but also remove preformatted documentation, de- 328 pendency files generated by ``make depend'', and any other 329 files known to be created at build time. ``make distclean'' 330 may be used as a synonym, for familiarity with a similar well- 331 known convention. 332 333 depend Create dependency files (.depend) containing more detailed in- 334 formation about the dependencies of source code on header 335 files. Allows programs to be recompiled automatically when a 336 dependency changes. 337 338 dependall Does a ``make depend'' immediately followed by a ``make all''. 339 This combined target recurses as an atomic unit, so that the 340 ``make depend'' phase can participate in make -j parallelism. 341 342 includes Build and install system header files. Typically needed be- 343 fore any system libraries or programs can be built. 344 345 install Install programs, libraries, and documentation into DESTDIR. 346 347 lint Run lint(1) against the C source code, where appropriate, and 348 generate system-installed lint libraries. 349 350 obj Create object directories to be used for built files, instead 351 of building directly in the source tree. 352 353 tags Create ctags(1) searchable function lists usable by the ex(1) 354 and vi(1) text editors. 355 356 "make" targets for the top level 357 Additional make(1) targets are usable specifically from the top source 358 level to facilitate building the entire NetBSD source tree. 359 360 build Build the entire NetBSD system. This orders portions of the 361 source tree such that prerequisites will be built in the prop- 362 er order. 363 364 release Do a ``make build'', then package the system into a standard 365 release layout as described by release(7). This requires that 366 RELEASEDIR be set (see above). 367 368 regression-tests 369 Can only be run after building the regression tests in the di- 370 rectory ``regress''. Runs the compiled regression tests on 371 the local host. 372 373 The "build.sh" script 374 This script file is a Bourne shell script designed to build the entire 375 NetBSD system on any host with a Bourne shell in /bin/sh, including many 376 that are not POSIX compliant. Note that if a host system's /bin/sh is 377 unusually old and broken, the Korn Shell (/bin/ksh), if available, may be 378 a usable alternative. 379 380 All cross-compile builds, and most native builds, of the entire system 381 should make use of build.sh rather than just running ``make''. This way, 382 the make(1) program will be bootstrapped properly, in case the host sys- 383 tem has an older or incompatible ``make'' program. 384 385 When compiling the entire system via build.sh, many make(1) variables are 386 set for you in order to help encapsulate the build process. In the list 387 of options below, variables that are automatically set by build.sh are 388 noted where applicable. 389 390 The following are available command line options that may be supplied to 391 build.sh: 392 393 -a arch Set the value of MACHINE_ARCH to arch. 394 395 -b Bootstrap ``make'' and create a nbmake-MACHINE script (see be- 396 low). 397 398 -j njob Set the value of NBUILDJOBS to njob. This provides similar 399 functionality to the familiar ``make -j'', but preserves the 400 ordering of the top level ``make build''. 401 402 -m mach Set the value of MACHINE to mach. This will also override any 403 value of MACHINE_ARCH in the process environment with a value 404 deduced from mach, unless -a is specified. All cross builds 405 require -m, but if unset on a NetBSD host, the host's value of 406 MACHINE will be detected and used automatically. 407 408 -n Show the commands that would be executed by build.sh, but do 409 not make any changes. This is similar in concept to ``make 410 -n''. 411 412 -o Set the value of MKOBJDIRS to ``no''. 413 414 -r Remove the contents of DESTDIR and TOOLDIR before building 415 (provides a clean starting point). This will skip deleting 416 DESTDIR if building on a native system to the root directory. 417 418 -t Build and install the host tools from src/tools only. This op- 419 tion implies -b. 420 421 -u Set the UPDATE variable. 422 423 -w wrapper 424 Create the nbmake wrapper script (see below) in a custom loca- 425 tion, specified by wrapper. This allows, for instance, to 426 place the wrapper in PATH automatically. Note that wrapper is 427 the full name of the file, not just a directory name. 428 429 -D dest Set the value of DESTDIR to dest. 430 431 -O obj Create an appropriate transform macro for MAKEOBJDIR that will 432 place the built object files under obj. For instance, a set- 433 ting of /usr/obj will place build-time files files under 434 /usr/obj/bin, /usr/obj/lib, and so forth. 435 436 -R rel Set the value of RELEASEDIR to rel. Setting this option will 437 cause build.sh to run ``make release'' instead of ``make 438 build''. 439 440 -T tools Set the value of TOOLDIR to tools. If set, the bootstrap 441 ``make'' will only be rebuilt as needed (when the source files 442 for make(1) change). 443 444 The "nbmake-MACHINE" wrapper script 445 If using the build.sh script to build NetBSD, a nbmake-MACHINE script 446 will be created in TOOLDIR/bin upon the first build to assist in building 447 subtrees on a cross-compile host. 448 449 nbmake-MACHINE can be invoked in lieu of make(1), and will instead call 450 the up-to-date version of ``nbmake'' installed into TOOLDIR/bin with sev- 451 eral key variables pre-set, including MACHINE, MACHINE_ARCH, and TOOLDIR. 452 This script can be symlinked into a directory listed in PATH, or called 453 with an absolute path. 454 455SEE ALSO 456 make(1), hier(7), release(7) 457 458HISTORY 459 The USE_NEW_TOOLCHAIN based build scheme was introduced in the ``NetBSD- 460 current'' development sources between NetBSD 1.5 and NetBSD 1.6. 461 462BUGS 463 Many platforms are not yet using the USE_NEW_TOOLCHAIN system. 464 465NetBSD November 12, 2001 8 466