1/* $NetBSD: i82557.c,v 1.138 2011/09/02 03:16:18 msaitoh Exp $ */ 2 3/*- 4 * Copyright (c) 1997, 1998, 1999, 2001, 2002 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, 9 * NASA Ames Research Center. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 * POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33/* 34 * Copyright (c) 1995, David Greenman 35 * Copyright (c) 2001 Jonathan Lemon <jlemon@freebsd.org> 36 * All rights reserved. 37 * 38 * Redistribution and use in source and binary forms, with or without 39 * modification, are permitted provided that the following conditions 40 * are met: 41 * 1. Redistributions of source code must retain the above copyright 42 * notice unmodified, this list of conditions, and the following 43 * disclaimer. 44 * 2. Redistributions in binary form must reproduce the above copyright 45 * notice, this list of conditions and the following disclaimer in the 46 * documentation and/or other materials provided with the distribution. 47 * 48 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 49 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 50 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 51 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 52 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 53 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 54 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 55 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 56 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 57 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 58 * SUCH DAMAGE. 59 * 60 * Id: if_fxp.c,v 1.113 2001/05/17 23:50:24 jlemon 61 */ 62 63/* 64 * Device driver for the Intel i82557 fast Ethernet controller, 65 * and its successors, the i82558 and i82559. 66 */ 67 68#include <sys/cdefs.h> 69__KERNEL_RCSID(0, "$NetBSD: i82557.c,v 1.138 2011/09/02 03:16:18 msaitoh Exp $"); 70 71#include <sys/param.h> 72#include <sys/systm.h> 73#include <sys/callout.h> 74#include <sys/mbuf.h> 75#include <sys/malloc.h> 76#include <sys/kernel.h> 77#include <sys/socket.h> 78#include <sys/ioctl.h> 79#include <sys/errno.h> 80#include <sys/device.h> 81#include <sys/syslog.h> 82#include <sys/proc.h> 83 84#include <machine/endian.h> 85 86#include <sys/rnd.h> 87 88#include <net/if.h> 89#include <net/if_dl.h> 90#include <net/if_media.h> 91#include <net/if_ether.h> 92 93#include <netinet/in.h> 94#include <netinet/in_systm.h> 95#include <netinet/ip.h> 96#include <netinet/tcp.h> 97#include <netinet/udp.h> 98 99#include <net/bpf.h> 100 101#include <sys/bus.h> 102#include <sys/intr.h> 103 104#include <dev/mii/miivar.h> 105 106#include <dev/ic/i82557reg.h> 107#include <dev/ic/i82557var.h> 108 109#include <dev/microcode/i8255x/rcvbundl.h> 110 111/* 112 * NOTE! On the Alpha, we have an alignment constraint. The 113 * card DMAs the packet immediately following the RFA. However, 114 * the first thing in the packet is a 14-byte Ethernet header. 115 * This means that the packet is misaligned. To compensate, 116 * we actually offset the RFA 2 bytes into the cluster. This 117 * alignes the packet after the Ethernet header at a 32-bit 118 * boundary. HOWEVER! This means that the RFA is misaligned! 119 */ 120#define RFA_ALIGNMENT_FUDGE 2 121 122/* 123 * The configuration byte map has several undefined fields which 124 * must be one or must be zero. Set up a template for these bits 125 * only (assuming an i82557 chip), leaving the actual configuration 126 * for fxp_init(). 127 * 128 * See the definition of struct fxp_cb_config for the bit definitions. 129 */ 130const uint8_t fxp_cb_config_template[] = { 131 0x0, 0x0, /* cb_status */ 132 0x0, 0x0, /* cb_command */ 133 0x0, 0x0, 0x0, 0x0, /* link_addr */ 134 0x0, /* 0 */ 135 0x0, /* 1 */ 136 0x0, /* 2 */ 137 0x0, /* 3 */ 138 0x0, /* 4 */ 139 0x0, /* 5 */ 140 0x32, /* 6 */ 141 0x0, /* 7 */ 142 0x0, /* 8 */ 143 0x0, /* 9 */ 144 0x6, /* 10 */ 145 0x0, /* 11 */ 146 0x0, /* 12 */ 147 0x0, /* 13 */ 148 0xf2, /* 14 */ 149 0x48, /* 15 */ 150 0x0, /* 16 */ 151 0x40, /* 17 */ 152 0xf0, /* 18 */ 153 0x0, /* 19 */ 154 0x3f, /* 20 */ 155 0x5, /* 21 */ 156 0x0, /* 22 */ 157 0x0, /* 23 */ 158 0x0, /* 24 */ 159 0x0, /* 25 */ 160 0x0, /* 26 */ 161 0x0, /* 27 */ 162 0x0, /* 28 */ 163 0x0, /* 29 */ 164 0x0, /* 30 */ 165 0x0, /* 31 */ 166}; 167 168void fxp_mii_initmedia(struct fxp_softc *); 169void fxp_mii_mediastatus(struct ifnet *, struct ifmediareq *); 170 171void fxp_80c24_initmedia(struct fxp_softc *); 172int fxp_80c24_mediachange(struct ifnet *); 173void fxp_80c24_mediastatus(struct ifnet *, struct ifmediareq *); 174 175void fxp_start(struct ifnet *); 176int fxp_ioctl(struct ifnet *, u_long, void *); 177void fxp_watchdog(struct ifnet *); 178int fxp_init(struct ifnet *); 179void fxp_stop(struct ifnet *, int); 180 181void fxp_txintr(struct fxp_softc *); 182int fxp_rxintr(struct fxp_softc *); 183 184void fxp_rx_hwcksum(struct fxp_softc *,struct mbuf *, 185 const struct fxp_rfa *, u_int); 186 187void fxp_rxdrain(struct fxp_softc *); 188int fxp_add_rfabuf(struct fxp_softc *, bus_dmamap_t, int); 189int fxp_mdi_read(device_t, int, int); 190void fxp_statchg(device_t); 191void fxp_mdi_write(device_t, int, int, int); 192void fxp_autosize_eeprom(struct fxp_softc*); 193void fxp_read_eeprom(struct fxp_softc *, uint16_t *, int, int); 194void fxp_write_eeprom(struct fxp_softc *, uint16_t *, int, int); 195void fxp_eeprom_update_cksum(struct fxp_softc *); 196void fxp_get_info(struct fxp_softc *, uint8_t *); 197void fxp_tick(void *); 198void fxp_mc_setup(struct fxp_softc *); 199void fxp_load_ucode(struct fxp_softc *); 200 201int fxp_copy_small = 0; 202 203/* 204 * Variables for interrupt mitigating microcode. 205 */ 206int fxp_int_delay = 1000; /* usec */ 207int fxp_bundle_max = 6; /* packets */ 208 209struct fxp_phytype { 210 int fp_phy; /* type of PHY, -1 for MII at the end. */ 211 void (*fp_init)(struct fxp_softc *); 212} fxp_phytype_table[] = { 213 { FXP_PHY_80C24, fxp_80c24_initmedia }, 214 { -1, fxp_mii_initmedia }, 215}; 216 217/* 218 * Set initial transmit threshold at 64 (512 bytes). This is 219 * increased by 64 (512 bytes) at a time, to maximum of 192 220 * (1536 bytes), if an underrun occurs. 221 */ 222static int tx_threshold = 64; 223 224/* 225 * Wait for the previous command to be accepted (but not necessarily 226 * completed). 227 */ 228static inline void 229fxp_scb_wait(struct fxp_softc *sc) 230{ 231 int i = 10000; 232 233 while (CSR_READ_1(sc, FXP_CSR_SCB_COMMAND) && --i) 234 delay(2); 235 if (i == 0) 236 log(LOG_WARNING, 237 "%s: WARNING: SCB timed out!\n", device_xname(sc->sc_dev)); 238} 239 240/* 241 * Submit a command to the i82557. 242 */ 243static inline void 244fxp_scb_cmd(struct fxp_softc *sc, uint8_t cmd) 245{ 246 247 CSR_WRITE_1(sc, FXP_CSR_SCB_COMMAND, cmd); 248} 249 250/* 251 * Finish attaching an i82557 interface. Called by bus-specific front-end. 252 */ 253void 254fxp_attach(struct fxp_softc *sc) 255{ 256 uint8_t enaddr[ETHER_ADDR_LEN]; 257 struct ifnet *ifp; 258 bus_dma_segment_t seg; 259 int rseg, i, error; 260 struct fxp_phytype *fp; 261 262 callout_init(&sc->sc_callout, 0); 263 264 /* 265 * Enable use of extended RFDs and IPCBs for 82550 and later chips. 266 * Note: to use IPCB we need extended TXCB support too, and 267 * these feature flags should be set in each bus attachment. 268 */ 269 if (sc->sc_flags & FXPF_EXT_RFA) { 270 sc->sc_txcmd = htole16(FXP_CB_COMMAND_IPCBXMIT); 271 sc->sc_rfa_size = RFA_EXT_SIZE; 272 } else { 273 sc->sc_txcmd = htole16(FXP_CB_COMMAND_XMIT); 274 sc->sc_rfa_size = RFA_SIZE; 275 } 276 277 /* 278 * Allocate the control data structures, and create and load the 279 * DMA map for it. 280 */ 281 if ((error = bus_dmamem_alloc(sc->sc_dmat, 282 sizeof(struct fxp_control_data), PAGE_SIZE, 0, &seg, 1, &rseg, 283 0)) != 0) { 284 aprint_error_dev(sc->sc_dev, 285 "unable to allocate control data, error = %d\n", 286 error); 287 goto fail_0; 288 } 289 290 if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, 291 sizeof(struct fxp_control_data), (void **)&sc->sc_control_data, 292 BUS_DMA_COHERENT)) != 0) { 293 aprint_error_dev(sc->sc_dev, 294 "unable to map control data, error = %d\n", error); 295 goto fail_1; 296 } 297 sc->sc_cdseg = seg; 298 sc->sc_cdnseg = rseg; 299 300 memset(sc->sc_control_data, 0, sizeof(struct fxp_control_data)); 301 302 if ((error = bus_dmamap_create(sc->sc_dmat, 303 sizeof(struct fxp_control_data), 1, 304 sizeof(struct fxp_control_data), 0, 0, &sc->sc_dmamap)) != 0) { 305 aprint_error_dev(sc->sc_dev, 306 "unable to create control data DMA map, error = %d\n", 307 error); 308 goto fail_2; 309 } 310 311 if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_dmamap, 312 sc->sc_control_data, sizeof(struct fxp_control_data), NULL, 313 0)) != 0) { 314 aprint_error_dev(sc->sc_dev, 315 "can't load control data DMA map, error = %d\n", 316 error); 317 goto fail_3; 318 } 319 320 /* 321 * Create the transmit buffer DMA maps. 322 */ 323 for (i = 0; i < FXP_NTXCB; i++) { 324 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 325 (sc->sc_flags & FXPF_EXT_RFA) ? 326 FXP_IPCB_NTXSEG : FXP_NTXSEG, 327 MCLBYTES, 0, 0, &FXP_DSTX(sc, i)->txs_dmamap)) != 0) { 328 aprint_error_dev(sc->sc_dev, 329 "unable to create tx DMA map %d, error = %d\n", 330 i, error); 331 goto fail_4; 332 } 333 } 334 335 /* 336 * Create the receive buffer DMA maps. 337 */ 338 for (i = 0; i < FXP_NRFABUFS; i++) { 339 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, 340 MCLBYTES, 0, 0, &sc->sc_rxmaps[i])) != 0) { 341 aprint_error_dev(sc->sc_dev, 342 "unable to create rx DMA map %d, error = %d\n", 343 i, error); 344 goto fail_5; 345 } 346 } 347 348 /* Initialize MAC address and media structures. */ 349 fxp_get_info(sc, enaddr); 350 351 aprint_normal_dev(sc->sc_dev, "Ethernet address %s\n", 352 ether_sprintf(enaddr)); 353 354 ifp = &sc->sc_ethercom.ec_if; 355 356 /* 357 * Get info about our media interface, and initialize it. Note 358 * the table terminates itself with a phy of -1, indicating 359 * that we're using MII. 360 */ 361 for (fp = fxp_phytype_table; fp->fp_phy != -1; fp++) 362 if (fp->fp_phy == sc->phy_primary_device) 363 break; 364 (*fp->fp_init)(sc); 365 366 strlcpy(ifp->if_xname, device_xname(sc->sc_dev), IFNAMSIZ); 367 ifp->if_softc = sc; 368 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 369 ifp->if_ioctl = fxp_ioctl; 370 ifp->if_start = fxp_start; 371 ifp->if_watchdog = fxp_watchdog; 372 ifp->if_init = fxp_init; 373 ifp->if_stop = fxp_stop; 374 IFQ_SET_READY(&ifp->if_snd); 375 376 if (sc->sc_flags & FXPF_EXT_RFA) { 377 /* 378 * Enable hardware cksum support by EXT_RFA and IPCB. 379 * 380 * IFCAP_CSUM_IPv4_Tx seems to have a problem, 381 * at least, on i82550 rev.12. 382 * specifically, it doesn't set ipv4 checksum properly 383 * when sending UDP (and probably TCP) packets with 384 * 20 byte ipv4 header + 1 or 2 byte data, 385 * though ICMP packets seem working. 386 * FreeBSD driver has related comments. 387 * We've added a workaround to handle the bug by padding 388 * such packets manually. 389 */ 390 ifp->if_capabilities = 391 IFCAP_CSUM_IPv4_Tx | IFCAP_CSUM_IPv4_Rx | 392 IFCAP_CSUM_TCPv4_Tx | IFCAP_CSUM_TCPv4_Rx | 393 IFCAP_CSUM_UDPv4_Tx | IFCAP_CSUM_UDPv4_Rx; 394 sc->sc_ethercom.ec_capabilities |= ETHERCAP_VLAN_HWTAGGING; 395 } else if (sc->sc_flags & FXPF_82559_RXCSUM) { 396 ifp->if_capabilities = 397 IFCAP_CSUM_TCPv4_Rx | 398 IFCAP_CSUM_UDPv4_Rx; 399 } 400 401 /* 402 * We can support 802.1Q VLAN-sized frames. 403 */ 404 sc->sc_ethercom.ec_capabilities |= ETHERCAP_VLAN_MTU; 405 406 /* 407 * Attach the interface. 408 */ 409 if_attach(ifp); 410 ether_ifattach(ifp, enaddr); 411 rnd_attach_source(&sc->rnd_source, device_xname(sc->sc_dev), 412 RND_TYPE_NET, 0); 413 414#ifdef FXP_EVENT_COUNTERS 415 evcnt_attach_dynamic(&sc->sc_ev_txstall, EVCNT_TYPE_MISC, 416 NULL, device_xname(sc->sc_dev), "txstall"); 417 evcnt_attach_dynamic(&sc->sc_ev_txintr, EVCNT_TYPE_INTR, 418 NULL, device_xname(sc->sc_dev), "txintr"); 419 evcnt_attach_dynamic(&sc->sc_ev_rxintr, EVCNT_TYPE_INTR, 420 NULL, device_xname(sc->sc_dev), "rxintr"); 421 if (sc->sc_flags & FXPF_FC) { 422 evcnt_attach_dynamic(&sc->sc_ev_txpause, EVCNT_TYPE_MISC, 423 NULL, device_xname(sc->sc_dev), "txpause"); 424 evcnt_attach_dynamic(&sc->sc_ev_rxpause, EVCNT_TYPE_MISC, 425 NULL, device_xname(sc->sc_dev), "rxpause"); 426 } 427#endif /* FXP_EVENT_COUNTERS */ 428 429 /* The attach is successful. */ 430 sc->sc_flags |= FXPF_ATTACHED; 431 432 return; 433 434 /* 435 * Free any resources we've allocated during the failed attach 436 * attempt. Do this in reverse order and fall though. 437 */ 438 fail_5: 439 for (i = 0; i < FXP_NRFABUFS; i++) { 440 if (sc->sc_rxmaps[i] != NULL) 441 bus_dmamap_destroy(sc->sc_dmat, sc->sc_rxmaps[i]); 442 } 443 fail_4: 444 for (i = 0; i < FXP_NTXCB; i++) { 445 if (FXP_DSTX(sc, i)->txs_dmamap != NULL) 446 bus_dmamap_destroy(sc->sc_dmat, 447 FXP_DSTX(sc, i)->txs_dmamap); 448 } 449 bus_dmamap_unload(sc->sc_dmat, sc->sc_dmamap); 450 fail_3: 451 bus_dmamap_destroy(sc->sc_dmat, sc->sc_dmamap); 452 fail_2: 453 bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_control_data, 454 sizeof(struct fxp_control_data)); 455 fail_1: 456 bus_dmamem_free(sc->sc_dmat, &seg, rseg); 457 fail_0: 458 return; 459} 460 461void 462fxp_mii_initmedia(struct fxp_softc *sc) 463{ 464 int flags; 465 466 sc->sc_flags |= FXPF_MII; 467 468 sc->sc_mii.mii_ifp = &sc->sc_ethercom.ec_if; 469 sc->sc_mii.mii_readreg = fxp_mdi_read; 470 sc->sc_mii.mii_writereg = fxp_mdi_write; 471 sc->sc_mii.mii_statchg = fxp_statchg; 472 473 sc->sc_ethercom.ec_mii = &sc->sc_mii; 474 ifmedia_init(&sc->sc_mii.mii_media, IFM_IMASK, ether_mediachange, 475 fxp_mii_mediastatus); 476 477 flags = MIIF_NOISOLATE; 478 if (sc->sc_flags & FXPF_FC) 479 flags |= MIIF_FORCEANEG|MIIF_DOPAUSE; 480 /* 481 * The i82557 wedges if all of its PHYs are isolated! 482 */ 483 mii_attach(sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY, 484 MII_OFFSET_ANY, flags); 485 if (LIST_EMPTY(&sc->sc_mii.mii_phys)) { 486 ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL); 487 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE); 488 } else 489 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO); 490} 491 492void 493fxp_80c24_initmedia(struct fxp_softc *sc) 494{ 495 496 /* 497 * The Seeq 80c24 AutoDUPLEX(tm) Ethernet Interface Adapter 498 * doesn't have a programming interface of any sort. The 499 * media is sensed automatically based on how the link partner 500 * is configured. This is, in essence, manual configuration. 501 */ 502 aprint_normal_dev(sc->sc_dev, 503 "Seeq 80c24 AutoDUPLEX media interface present\n"); 504 ifmedia_init(&sc->sc_mii.mii_media, 0, fxp_80c24_mediachange, 505 fxp_80c24_mediastatus); 506 ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_MANUAL, 0, NULL); 507 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_MANUAL); 508} 509 510/* 511 * Initialize the interface media. 512 */ 513void 514fxp_get_info(struct fxp_softc *sc, uint8_t *enaddr) 515{ 516 uint16_t data, myea[ETHER_ADDR_LEN / 2]; 517 518 /* 519 * Reset to a stable state. 520 */ 521 CSR_WRITE_4(sc, FXP_CSR_PORT, FXP_PORT_SELECTIVE_RESET); 522 DELAY(100); 523 524 sc->sc_eeprom_size = 0; 525 fxp_autosize_eeprom(sc); 526 if (sc->sc_eeprom_size == 0) { 527 aprint_error_dev(sc->sc_dev, "failed to detect EEPROM size\n"); 528 sc->sc_eeprom_size = 6; /* XXX panic here? */ 529 } 530#ifdef DEBUG 531 aprint_debug_dev(sc->sc_dev, "detected %d word EEPROM\n", 532 1 << sc->sc_eeprom_size); 533#endif 534 535 /* 536 * Get info about the primary PHY 537 */ 538 fxp_read_eeprom(sc, &data, 6, 1); 539 sc->phy_primary_device = 540 (data & FXP_PHY_DEVICE_MASK) >> FXP_PHY_DEVICE_SHIFT; 541 542 /* 543 * Read MAC address. 544 */ 545 fxp_read_eeprom(sc, myea, 0, 3); 546 enaddr[0] = myea[0] & 0xff; 547 enaddr[1] = myea[0] >> 8; 548 enaddr[2] = myea[1] & 0xff; 549 enaddr[3] = myea[1] >> 8; 550 enaddr[4] = myea[2] & 0xff; 551 enaddr[5] = myea[2] >> 8; 552 553 /* 554 * Systems based on the ICH2/ICH2-M chip from Intel, as well 555 * as some i82559 designs, have a defect where the chip can 556 * cause a PCI protocol violation if it receives a CU_RESUME 557 * command when it is entering the IDLE state. 558 * 559 * The work-around is to disable Dynamic Standby Mode, so that 560 * the chip never deasserts #CLKRUN, and always remains in the 561 * active state. 562 * 563 * Unfortunately, the only way to disable Dynamic Standby is 564 * to frob an EEPROM setting and reboot (the EEPROM setting 565 * is only consulted when the PCI bus comes out of reset). 566 * 567 * See Intel 82801BA/82801BAM Specification Update, Errata #30. 568 */ 569 if (sc->sc_flags & FXPF_HAS_RESUME_BUG) { 570 fxp_read_eeprom(sc, &data, 10, 1); 571 if (data & 0x02) { /* STB enable */ 572 aprint_error_dev(sc->sc_dev, "WARNING: " 573 "Disabling dynamic standby mode in EEPROM " 574 "to work around a\n"); 575 aprint_normal_dev(sc->sc_dev, 576 "WARNING: hardware bug. You must reset " 577 "the system before using this\n"); 578 aprint_normal_dev(sc->sc_dev, "WARNING: interface.\n"); 579 data &= ~0x02; 580 fxp_write_eeprom(sc, &data, 10, 1); 581 aprint_normal_dev(sc->sc_dev, "new EEPROM ID: 0x%04x\n", 582 data); 583 fxp_eeprom_update_cksum(sc); 584 } 585 } 586 587 /* Receiver lock-up workaround detection. (FXPF_RECV_WORKAROUND) */ 588 /* Due to false positives we make it conditional on setting link1 */ 589 fxp_read_eeprom(sc, &data, 3, 1); 590 if ((data & 0x03) != 0x03) { 591 aprint_verbose_dev(sc->sc_dev, 592 "May need receiver lock-up workaround\n"); 593 } 594} 595 596static void 597fxp_eeprom_shiftin(struct fxp_softc *sc, int data, int len) 598{ 599 uint16_t reg; 600 int x; 601 602 for (x = 1 << (len - 1); x != 0; x >>= 1) { 603 DELAY(40); 604 if (data & x) 605 reg = FXP_EEPROM_EECS | FXP_EEPROM_EEDI; 606 else 607 reg = FXP_EEPROM_EECS; 608 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg); 609 DELAY(40); 610 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 611 reg | FXP_EEPROM_EESK); 612 DELAY(40); 613 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg); 614 } 615 DELAY(40); 616} 617 618/* 619 * Figure out EEPROM size. 620 * 621 * 559's can have either 64-word or 256-word EEPROMs, the 558 622 * datasheet only talks about 64-word EEPROMs, and the 557 datasheet 623 * talks about the existence of 16 to 256 word EEPROMs. 624 * 625 * The only known sizes are 64 and 256, where the 256 version is used 626 * by CardBus cards to store CIS information. 627 * 628 * The address is shifted in msb-to-lsb, and after the last 629 * address-bit the EEPROM is supposed to output a `dummy zero' bit, 630 * after which follows the actual data. We try to detect this zero, by 631 * probing the data-out bit in the EEPROM control register just after 632 * having shifted in a bit. If the bit is zero, we assume we've 633 * shifted enough address bits. The data-out should be tri-state, 634 * before this, which should translate to a logical one. 635 * 636 * Other ways to do this would be to try to read a register with known 637 * contents with a varying number of address bits, but no such 638 * register seem to be available. The high bits of register 10 are 01 639 * on the 558 and 559, but apparently not on the 557. 640 * 641 * The Linux driver computes a checksum on the EEPROM data, but the 642 * value of this checksum is not very well documented. 643 */ 644 645void 646fxp_autosize_eeprom(struct fxp_softc *sc) 647{ 648 int x; 649 650 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 651 DELAY(40); 652 653 /* Shift in read opcode. */ 654 fxp_eeprom_shiftin(sc, FXP_EEPROM_OPC_READ, 3); 655 656 /* 657 * Shift in address, wait for the dummy zero following a correct 658 * address shift. 659 */ 660 for (x = 1; x <= 8; x++) { 661 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 662 DELAY(40); 663 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 664 FXP_EEPROM_EECS | FXP_EEPROM_EESK); 665 DELAY(40); 666 if ((CSR_READ_2(sc, FXP_CSR_EEPROMCONTROL) & 667 FXP_EEPROM_EEDO) == 0) 668 break; 669 DELAY(40); 670 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 671 DELAY(40); 672 } 673 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); 674 DELAY(40); 675 if (x != 6 && x != 8) { 676#ifdef DEBUG 677 printf("%s: strange EEPROM size (%d)\n", 678 device_xname(sc->sc_dev), 1 << x); 679#endif 680 } else 681 sc->sc_eeprom_size = x; 682} 683 684/* 685 * Read from the serial EEPROM. Basically, you manually shift in 686 * the read opcode (one bit at a time) and then shift in the address, 687 * and then you shift out the data (all of this one bit at a time). 688 * The word size is 16 bits, so you have to provide the address for 689 * every 16 bits of data. 690 */ 691void 692fxp_read_eeprom(struct fxp_softc *sc, uint16_t *data, int offset, int words) 693{ 694 uint16_t reg; 695 int i, x; 696 697 for (i = 0; i < words; i++) { 698 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 699 700 /* Shift in read opcode. */ 701 fxp_eeprom_shiftin(sc, FXP_EEPROM_OPC_READ, 3); 702 703 /* Shift in address. */ 704 fxp_eeprom_shiftin(sc, i + offset, sc->sc_eeprom_size); 705 706 reg = FXP_EEPROM_EECS; 707 data[i] = 0; 708 709 /* Shift out data. */ 710 for (x = 16; x > 0; x--) { 711 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 712 reg | FXP_EEPROM_EESK); 713 DELAY(40); 714 if (CSR_READ_2(sc, FXP_CSR_EEPROMCONTROL) & 715 FXP_EEPROM_EEDO) 716 data[i] |= (1 << (x - 1)); 717 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg); 718 DELAY(40); 719 } 720 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); 721 DELAY(40); 722 } 723} 724 725/* 726 * Write data to the serial EEPROM. 727 */ 728void 729fxp_write_eeprom(struct fxp_softc *sc, uint16_t *data, int offset, int words) 730{ 731 int i, j; 732 733 for (i = 0; i < words; i++) { 734 /* Erase/write enable. */ 735 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 736 fxp_eeprom_shiftin(sc, FXP_EEPROM_OPC_ERASE, 3); 737 fxp_eeprom_shiftin(sc, 0x3 << (sc->sc_eeprom_size - 2), 738 sc->sc_eeprom_size); 739 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); 740 DELAY(4); 741 742 /* Shift in write opcode, address, data. */ 743 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 744 fxp_eeprom_shiftin(sc, FXP_EEPROM_OPC_WRITE, 3); 745 fxp_eeprom_shiftin(sc, i + offset, sc->sc_eeprom_size); 746 fxp_eeprom_shiftin(sc, data[i], 16); 747 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); 748 DELAY(4); 749 750 /* Wait for the EEPROM to finish up. */ 751 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 752 DELAY(4); 753 for (j = 0; j < 1000; j++) { 754 if (CSR_READ_2(sc, FXP_CSR_EEPROMCONTROL) & 755 FXP_EEPROM_EEDO) 756 break; 757 DELAY(50); 758 } 759 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); 760 DELAY(4); 761 762 /* Erase/write disable. */ 763 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 764 fxp_eeprom_shiftin(sc, FXP_EEPROM_OPC_ERASE, 3); 765 fxp_eeprom_shiftin(sc, 0, sc->sc_eeprom_size); 766 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); 767 DELAY(4); 768 } 769} 770 771/* 772 * Update the checksum of the EEPROM. 773 */ 774void 775fxp_eeprom_update_cksum(struct fxp_softc *sc) 776{ 777 int i; 778 uint16_t data, cksum; 779 780 cksum = 0; 781 for (i = 0; i < (1 << sc->sc_eeprom_size) - 1; i++) { 782 fxp_read_eeprom(sc, &data, i, 1); 783 cksum += data; 784 } 785 i = (1 << sc->sc_eeprom_size) - 1; 786 cksum = 0xbaba - cksum; 787 fxp_read_eeprom(sc, &data, i, 1); 788 fxp_write_eeprom(sc, &cksum, i, 1); 789 log(LOG_INFO, "%s: EEPROM checksum @ 0x%x: 0x%04x -> 0x%04x\n", 790 device_xname(sc->sc_dev), i, data, cksum); 791} 792 793/* 794 * Start packet transmission on the interface. 795 */ 796void 797fxp_start(struct ifnet *ifp) 798{ 799 struct fxp_softc *sc = ifp->if_softc; 800 struct mbuf *m0, *m; 801 struct fxp_txdesc *txd; 802 struct fxp_txsoft *txs; 803 bus_dmamap_t dmamap; 804 int error, lasttx, nexttx, opending, seg, nsegs, len; 805 806 /* 807 * If we want a re-init, bail out now. 808 */ 809 if (sc->sc_flags & FXPF_WANTINIT) { 810 ifp->if_flags |= IFF_OACTIVE; 811 return; 812 } 813 814 if ((ifp->if_flags & (IFF_RUNNING|IFF_OACTIVE)) != IFF_RUNNING) 815 return; 816 817 /* 818 * Remember the previous txpending and the current lasttx. 819 */ 820 opending = sc->sc_txpending; 821 lasttx = sc->sc_txlast; 822 823 /* 824 * Loop through the send queue, setting up transmit descriptors 825 * until we drain the queue, or use up all available transmit 826 * descriptors. 827 */ 828 for (;;) { 829 struct fxp_tbd *tbdp; 830 int csum_flags; 831 832 /* 833 * Grab a packet off the queue. 834 */ 835 IFQ_POLL(&ifp->if_snd, m0); 836 if (m0 == NULL) 837 break; 838 m = NULL; 839 840 if (sc->sc_txpending == FXP_NTXCB - 1) { 841 FXP_EVCNT_INCR(&sc->sc_ev_txstall); 842 break; 843 } 844 845 /* 846 * Get the next available transmit descriptor. 847 */ 848 nexttx = FXP_NEXTTX(sc->sc_txlast); 849 txd = FXP_CDTX(sc, nexttx); 850 txs = FXP_DSTX(sc, nexttx); 851 dmamap = txs->txs_dmamap; 852 853 /* 854 * Load the DMA map. If this fails, the packet either 855 * didn't fit in the allotted number of frags, or we were 856 * short on resources. In this case, we'll copy and try 857 * again. 858 */ 859 if (bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m0, 860 BUS_DMA_WRITE|BUS_DMA_NOWAIT) != 0) { 861 MGETHDR(m, M_DONTWAIT, MT_DATA); 862 if (m == NULL) { 863 log(LOG_ERR, "%s: unable to allocate Tx mbuf\n", 864 device_xname(sc->sc_dev)); 865 break; 866 } 867 MCLAIM(m, &sc->sc_ethercom.ec_tx_mowner); 868 if (m0->m_pkthdr.len > MHLEN) { 869 MCLGET(m, M_DONTWAIT); 870 if ((m->m_flags & M_EXT) == 0) { 871 log(LOG_ERR, "%s: unable to allocate " 872 "Tx cluster\n", 873 device_xname(sc->sc_dev)); 874 m_freem(m); 875 break; 876 } 877 } 878 m_copydata(m0, 0, m0->m_pkthdr.len, mtod(m, void *)); 879 m->m_pkthdr.len = m->m_len = m0->m_pkthdr.len; 880 error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, 881 m, BUS_DMA_WRITE|BUS_DMA_NOWAIT); 882 if (error) { 883 log(LOG_ERR, "%s: unable to load Tx buffer, " 884 "error = %d\n", 885 device_xname(sc->sc_dev), error); 886 break; 887 } 888 } 889 890 IFQ_DEQUEUE(&ifp->if_snd, m0); 891 csum_flags = m0->m_pkthdr.csum_flags; 892 if (m != NULL) { 893 m_freem(m0); 894 m0 = m; 895 } 896 897 /* Initialize the fraglist. */ 898 tbdp = txd->txd_tbd; 899 len = m0->m_pkthdr.len; 900 nsegs = dmamap->dm_nsegs; 901 if (sc->sc_flags & FXPF_EXT_RFA) 902 tbdp++; 903 for (seg = 0; seg < nsegs; seg++) { 904 tbdp[seg].tb_addr = 905 htole32(dmamap->dm_segs[seg].ds_addr); 906 tbdp[seg].tb_size = 907 htole32(dmamap->dm_segs[seg].ds_len); 908 } 909 if (__predict_false(len <= FXP_IP4CSUMTX_PADLEN && 910 (csum_flags & M_CSUM_IPv4) != 0)) { 911 /* 912 * Pad short packets to avoid ip4csum-tx bug. 913 * 914 * XXX Should we still consider if such short 915 * (36 bytes or less) packets might already 916 * occupy FXP_IPCB_NTXSEG (15) fragments here? 917 */ 918 KASSERT(nsegs < FXP_IPCB_NTXSEG); 919 nsegs++; 920 tbdp[seg].tb_addr = htole32(FXP_CDTXPADADDR(sc)); 921 tbdp[seg].tb_size = 922 htole32(FXP_IP4CSUMTX_PADLEN + 1 - len); 923 } 924 925 /* Sync the DMA map. */ 926 bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize, 927 BUS_DMASYNC_PREWRITE); 928 929 /* 930 * Store a pointer to the packet so we can free it later. 931 */ 932 txs->txs_mbuf = m0; 933 934 /* 935 * Initialize the transmit descriptor. 936 */ 937 /* BIG_ENDIAN: no need to swap to store 0 */ 938 txd->txd_txcb.cb_status = 0; 939 txd->txd_txcb.cb_command = 940 sc->sc_txcmd | htole16(FXP_CB_COMMAND_SF); 941 txd->txd_txcb.tx_threshold = tx_threshold; 942 txd->txd_txcb.tbd_number = nsegs; 943 944 KASSERT((csum_flags & (M_CSUM_TCPv6 | M_CSUM_UDPv6)) == 0); 945 if (sc->sc_flags & FXPF_EXT_RFA) { 946 struct m_tag *vtag; 947 struct fxp_ipcb *ipcb; 948 /* 949 * Deal with TCP/IP checksum offload. Note that 950 * in order for TCP checksum offload to work, 951 * the pseudo header checksum must have already 952 * been computed and stored in the checksum field 953 * in the TCP header. The stack should have 954 * already done this for us. 955 */ 956 ipcb = &txd->txd_u.txdu_ipcb; 957 memset(ipcb, 0, sizeof(*ipcb)); 958 /* 959 * always do hardware parsing. 960 */ 961 ipcb->ipcb_ip_activation_high = 962 FXP_IPCB_HARDWAREPARSING_ENABLE; 963 /* 964 * ip checksum offloading. 965 */ 966 if (csum_flags & M_CSUM_IPv4) { 967 ipcb->ipcb_ip_schedule |= 968 FXP_IPCB_IP_CHECKSUM_ENABLE; 969 } 970 /* 971 * TCP/UDP checksum offloading. 972 */ 973 if (csum_flags & (M_CSUM_TCPv4 | M_CSUM_UDPv4)) { 974 ipcb->ipcb_ip_schedule |= 975 FXP_IPCB_TCPUDP_CHECKSUM_ENABLE; 976 } 977 978 /* 979 * request VLAN tag insertion if needed. 980 */ 981 vtag = VLAN_OUTPUT_TAG(&sc->sc_ethercom, m0); 982 if (vtag) { 983 ipcb->ipcb_vlan_id = 984 htobe16(*(u_int *)(vtag + 1)); 985 ipcb->ipcb_ip_activation_high |= 986 FXP_IPCB_INSERTVLAN_ENABLE; 987 } 988 } else { 989 KASSERT((csum_flags & 990 (M_CSUM_IPv4 | M_CSUM_TCPv4 | M_CSUM_UDPv4)) == 0); 991 } 992 993 FXP_CDTXSYNC(sc, nexttx, 994 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 995 996 /* Advance the tx pointer. */ 997 sc->sc_txpending++; 998 sc->sc_txlast = nexttx; 999 1000 /* 1001 * Pass packet to bpf if there is a listener. 1002 */ 1003 bpf_mtap(ifp, m0); 1004 } 1005 1006 if (sc->sc_txpending == FXP_NTXCB - 1) { 1007 /* No more slots; notify upper layer. */ 1008 ifp->if_flags |= IFF_OACTIVE; 1009 } 1010 1011 if (sc->sc_txpending != opending) { 1012 /* 1013 * We enqueued packets. If the transmitter was idle, 1014 * reset the txdirty pointer. 1015 */ 1016 if (opending == 0) 1017 sc->sc_txdirty = FXP_NEXTTX(lasttx); 1018 1019 /* 1020 * Cause the chip to interrupt and suspend command 1021 * processing once the last packet we've enqueued 1022 * has been transmitted. 1023 * 1024 * To avoid a race between updating status bits 1025 * by the fxp chip and clearing command bits 1026 * by this function on machines which don't have 1027 * atomic methods to clear/set bits in memory 1028 * smaller than 32bits (both cb_status and cb_command 1029 * members are uint16_t and in the same 32bit word), 1030 * we have to prepare a dummy TX descriptor which has 1031 * NOP command and just causes a TX completion interrupt. 1032 */ 1033 sc->sc_txpending++; 1034 sc->sc_txlast = FXP_NEXTTX(sc->sc_txlast); 1035 txd = FXP_CDTX(sc, sc->sc_txlast); 1036 /* BIG_ENDIAN: no need to swap to store 0 */ 1037 txd->txd_txcb.cb_status = 0; 1038 txd->txd_txcb.cb_command = htole16(FXP_CB_COMMAND_NOP | 1039 FXP_CB_COMMAND_I | FXP_CB_COMMAND_S); 1040 FXP_CDTXSYNC(sc, sc->sc_txlast, 1041 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1042 1043 /* 1044 * The entire packet chain is set up. Clear the suspend bit 1045 * on the command prior to the first packet we set up. 1046 */ 1047 FXP_CDTXSYNC(sc, lasttx, 1048 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 1049 FXP_CDTX(sc, lasttx)->txd_txcb.cb_command &= 1050 htole16(~FXP_CB_COMMAND_S); 1051 FXP_CDTXSYNC(sc, lasttx, 1052 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1053 1054 /* 1055 * Issue a Resume command in case the chip was suspended. 1056 */ 1057 fxp_scb_wait(sc); 1058 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_RESUME); 1059 1060 /* Set a watchdog timer in case the chip flakes out. */ 1061 ifp->if_timer = 5; 1062 } 1063} 1064 1065/* 1066 * Process interface interrupts. 1067 */ 1068int 1069fxp_intr(void *arg) 1070{ 1071 struct fxp_softc *sc = arg; 1072 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1073 bus_dmamap_t rxmap; 1074 int claimed = 0, rnr; 1075 uint8_t statack; 1076 1077 if (!device_is_active(sc->sc_dev) || sc->sc_enabled == 0) 1078 return (0); 1079 /* 1080 * If the interface isn't running, don't try to 1081 * service the interrupt.. just ack it and bail. 1082 */ 1083 if ((ifp->if_flags & IFF_RUNNING) == 0) { 1084 statack = CSR_READ_1(sc, FXP_CSR_SCB_STATACK); 1085 if (statack) { 1086 claimed = 1; 1087 CSR_WRITE_1(sc, FXP_CSR_SCB_STATACK, statack); 1088 } 1089 return (claimed); 1090 } 1091 1092 while ((statack = CSR_READ_1(sc, FXP_CSR_SCB_STATACK)) != 0) { 1093 claimed = 1; 1094 1095 /* 1096 * First ACK all the interrupts in this pass. 1097 */ 1098 CSR_WRITE_1(sc, FXP_CSR_SCB_STATACK, statack); 1099 1100 /* 1101 * Process receiver interrupts. If a no-resource (RNR) 1102 * condition exists, get whatever packets we can and 1103 * re-start the receiver. 1104 */ 1105 rnr = (statack & (FXP_SCB_STATACK_RNR | FXP_SCB_STATACK_SWI)) ? 1106 1 : 0; 1107 if (statack & (FXP_SCB_STATACK_FR | FXP_SCB_STATACK_RNR | 1108 FXP_SCB_STATACK_SWI)) { 1109 FXP_EVCNT_INCR(&sc->sc_ev_rxintr); 1110 rnr |= fxp_rxintr(sc); 1111 } 1112 1113 /* 1114 * Free any finished transmit mbuf chains. 1115 */ 1116 if (statack & (FXP_SCB_STATACK_CXTNO|FXP_SCB_STATACK_CNA)) { 1117 FXP_EVCNT_INCR(&sc->sc_ev_txintr); 1118 fxp_txintr(sc); 1119 1120 /* 1121 * Try to get more packets going. 1122 */ 1123 fxp_start(ifp); 1124 1125 if (sc->sc_txpending == 0) { 1126 /* 1127 * Tell them that they can re-init now. 1128 */ 1129 if (sc->sc_flags & FXPF_WANTINIT) 1130 wakeup(sc); 1131 } 1132 } 1133 1134 if (rnr) { 1135 fxp_scb_wait(sc); 1136 fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_ABORT); 1137 rxmap = M_GETCTX(sc->sc_rxq.ifq_head, bus_dmamap_t); 1138 fxp_scb_wait(sc); 1139 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, 1140 rxmap->dm_segs[0].ds_addr + 1141 RFA_ALIGNMENT_FUDGE); 1142 fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_START); 1143 } 1144 } 1145 1146 if (claimed) 1147 rnd_add_uint32(&sc->rnd_source, statack); 1148 return (claimed); 1149} 1150 1151/* 1152 * Handle transmit completion interrupts. 1153 */ 1154void 1155fxp_txintr(struct fxp_softc *sc) 1156{ 1157 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1158 struct fxp_txdesc *txd; 1159 struct fxp_txsoft *txs; 1160 int i; 1161 uint16_t txstat; 1162 1163 ifp->if_flags &= ~IFF_OACTIVE; 1164 for (i = sc->sc_txdirty; sc->sc_txpending != 0; 1165 i = FXP_NEXTTX(i), sc->sc_txpending--) { 1166 txd = FXP_CDTX(sc, i); 1167 txs = FXP_DSTX(sc, i); 1168 1169 FXP_CDTXSYNC(sc, i, 1170 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 1171 1172 /* skip dummy NOP TX descriptor */ 1173 if ((le16toh(txd->txd_txcb.cb_command) & FXP_CB_COMMAND_CMD) 1174 == FXP_CB_COMMAND_NOP) 1175 continue; 1176 1177 txstat = le16toh(txd->txd_txcb.cb_status); 1178 1179 if ((txstat & FXP_CB_STATUS_C) == 0) 1180 break; 1181 1182 bus_dmamap_sync(sc->sc_dmat, txs->txs_dmamap, 1183 0, txs->txs_dmamap->dm_mapsize, 1184 BUS_DMASYNC_POSTWRITE); 1185 bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap); 1186 m_freem(txs->txs_mbuf); 1187 txs->txs_mbuf = NULL; 1188 } 1189 1190 /* Update the dirty transmit buffer pointer. */ 1191 sc->sc_txdirty = i; 1192 1193 /* 1194 * Cancel the watchdog timer if there are no pending 1195 * transmissions. 1196 */ 1197 if (sc->sc_txpending == 0) 1198 ifp->if_timer = 0; 1199} 1200 1201/* 1202 * fxp_rx_hwcksum: check status of H/W offloading for received packets. 1203 */ 1204 1205void 1206fxp_rx_hwcksum(struct fxp_softc *sc, struct mbuf *m, const struct fxp_rfa *rfa, 1207 u_int len) 1208{ 1209 uint32_t csum_data; 1210 int csum_flags; 1211 1212 /* 1213 * check H/W Checksumming. 1214 */ 1215 1216 csum_flags = 0; 1217 csum_data = 0; 1218 1219 if ((sc->sc_flags & FXPF_EXT_RFA) != 0) { 1220 uint8_t rxparsestat; 1221 uint8_t csum_stat; 1222 1223 csum_stat = rfa->cksum_stat; 1224 rxparsestat = rfa->rx_parse_stat; 1225 if ((rfa->rfa_status & htole16(FXP_RFA_STATUS_PARSE)) == 0) 1226 goto out; 1227 1228 if (csum_stat & FXP_RFDX_CS_IP_CSUM_BIT_VALID) { 1229 csum_flags = M_CSUM_IPv4; 1230 if ((csum_stat & FXP_RFDX_CS_IP_CSUM_VALID) == 0) 1231 csum_flags |= M_CSUM_IPv4_BAD; 1232 } 1233 1234 if (csum_stat & FXP_RFDX_CS_TCPUDP_CSUM_BIT_VALID) { 1235 csum_flags |= (M_CSUM_TCPv4|M_CSUM_UDPv4); /* XXX */ 1236 if ((csum_stat & FXP_RFDX_CS_TCPUDP_CSUM_VALID) == 0) 1237 csum_flags |= M_CSUM_TCP_UDP_BAD; 1238 } 1239 1240 } else if ((sc->sc_flags & FXPF_82559_RXCSUM) != 0) { 1241 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1242 struct ether_header *eh; 1243 struct ip *ip; 1244 struct udphdr *uh; 1245 u_int hlen, pktlen; 1246 1247 if (len < ETHER_HDR_LEN + sizeof(struct ip)) 1248 goto out; 1249 pktlen = len - ETHER_HDR_LEN; 1250 eh = mtod(m, struct ether_header *); 1251 if (ntohs(eh->ether_type) != ETHERTYPE_IP) 1252 goto out; 1253 ip = (struct ip *)((uint8_t *)eh + ETHER_HDR_LEN); 1254 if (ip->ip_v != IPVERSION) 1255 goto out; 1256 1257 hlen = ip->ip_hl << 2; 1258 if (hlen < sizeof(struct ip)) 1259 goto out; 1260 1261 /* 1262 * Bail if too short, has random trailing garbage, truncated, 1263 * fragment, or has ethernet pad. 1264 */ 1265 if (ntohs(ip->ip_len) < hlen || 1266 ntohs(ip->ip_len) != pktlen || 1267 (ntohs(ip->ip_off) & (IP_MF | IP_OFFMASK)) != 0) 1268 goto out; 1269 1270 switch (ip->ip_p) { 1271 case IPPROTO_TCP: 1272 if ((ifp->if_csum_flags_rx & M_CSUM_TCPv4) == 0 || 1273 pktlen < (hlen + sizeof(struct tcphdr))) 1274 goto out; 1275 csum_flags = 1276 M_CSUM_TCPv4 | M_CSUM_DATA | M_CSUM_NO_PSEUDOHDR; 1277 break; 1278 case IPPROTO_UDP: 1279 if ((ifp->if_csum_flags_rx & M_CSUM_UDPv4) == 0 || 1280 pktlen < (hlen + sizeof(struct udphdr))) 1281 goto out; 1282 uh = (struct udphdr *)((uint8_t *)ip + hlen); 1283 if (uh->uh_sum == 0) 1284 goto out; /* no checksum */ 1285 csum_flags = 1286 M_CSUM_UDPv4 | M_CSUM_DATA | M_CSUM_NO_PSEUDOHDR; 1287 break; 1288 default: 1289 goto out; 1290 } 1291 1292 /* Extract computed checksum. */ 1293 csum_data = be16dec(mtod(m, uint8_t *) + len); 1294 1295 /* 1296 * The computed checksum includes IP headers, 1297 * so we have to deduct them. 1298 */ 1299#if 0 1300 /* 1301 * But in TCP/UDP layer we can assume the IP header is valid, 1302 * i.e. a sum of the whole IP header should be 0xffff, 1303 * so we don't have to bother to deduct it. 1304 */ 1305 if (hlen > 0) { 1306 uint32_t hsum; 1307 const uint16_t *iphdr; 1308 hsum = 0; 1309 iphdr = (uint16_t *)ip; 1310 1311 while (hlen > 1) { 1312 hsum += ntohs(*iphdr++); 1313 hlen -= sizeof(uint16_t); 1314 } 1315 while (hsum >> 16) 1316 hsum = (hsum >> 16) + (hsum & 0xffff); 1317 1318 csum_data += (uint16_t)~hsum; 1319 1320 while (csum_data >> 16) 1321 csum_data = 1322 (csum_data >> 16) + (csum_data & 0xffff); 1323 } 1324#endif 1325 } 1326 out: 1327 m->m_pkthdr.csum_flags = csum_flags; 1328 m->m_pkthdr.csum_data = csum_data; 1329} 1330 1331/* 1332 * Handle receive interrupts. 1333 */ 1334int 1335fxp_rxintr(struct fxp_softc *sc) 1336{ 1337 struct ethercom *ec = &sc->sc_ethercom; 1338 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1339 struct mbuf *m, *m0; 1340 bus_dmamap_t rxmap; 1341 struct fxp_rfa *rfa; 1342 int rnr; 1343 uint16_t len, rxstat; 1344 1345 rnr = 0; 1346 1347 for (;;) { 1348 m = sc->sc_rxq.ifq_head; 1349 rfa = FXP_MTORFA(m); 1350 rxmap = M_GETCTX(m, bus_dmamap_t); 1351 1352 FXP_RFASYNC(sc, m, 1353 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 1354 1355 rxstat = le16toh(rfa->rfa_status); 1356 1357 if ((rxstat & FXP_RFA_STATUS_RNR) != 0) 1358 rnr = 1; 1359 1360 if ((rxstat & FXP_RFA_STATUS_C) == 0) { 1361 /* 1362 * We have processed all of the 1363 * receive buffers. 1364 */ 1365 FXP_RFASYNC(sc, m, BUS_DMASYNC_PREREAD); 1366 return rnr; 1367 } 1368 1369 IF_DEQUEUE(&sc->sc_rxq, m); 1370 1371 FXP_RXBUFSYNC(sc, m, BUS_DMASYNC_POSTREAD); 1372 1373 len = le16toh(rfa->actual_size) & 1374 (m->m_ext.ext_size - 1); 1375 if ((sc->sc_flags & FXPF_82559_RXCSUM) != 0) { 1376 /* Adjust for appended checksum bytes. */ 1377 len -= sizeof(uint16_t); 1378 } 1379 1380 if (len < sizeof(struct ether_header)) { 1381 /* 1382 * Runt packet; drop it now. 1383 */ 1384 FXP_INIT_RFABUF(sc, m); 1385 continue; 1386 } 1387 1388 /* 1389 * If support for 802.1Q VLAN sized frames is 1390 * enabled, we need to do some additional error 1391 * checking (as we are saving bad frames, in 1392 * order to receive the larger ones). 1393 */ 1394 if ((ec->ec_capenable & ETHERCAP_VLAN_MTU) != 0 && 1395 (rxstat & (FXP_RFA_STATUS_OVERRUN| 1396 FXP_RFA_STATUS_RNR| 1397 FXP_RFA_STATUS_ALIGN| 1398 FXP_RFA_STATUS_CRC)) != 0) { 1399 FXP_INIT_RFABUF(sc, m); 1400 continue; 1401 } 1402 1403 /* 1404 * check VLAN tag stripping. 1405 */ 1406 if ((sc->sc_flags & FXPF_EXT_RFA) != 0 && 1407 (rfa->rfa_status & htole16(FXP_RFA_STATUS_VLAN)) != 0) { 1408 struct m_tag *vtag; 1409 1410 vtag = m_tag_get(PACKET_TAG_VLAN, sizeof(u_int), 1411 M_NOWAIT); 1412 if (vtag == NULL) 1413 goto dropit; 1414 *(u_int *)(vtag + 1) = be16toh(rfa->vlan_id); 1415 m_tag_prepend(m, vtag); 1416 } 1417 1418 /* Do checksum checking. */ 1419 if ((ifp->if_csum_flags_rx & (M_CSUM_TCPv4|M_CSUM_UDPv4)) != 0) 1420 fxp_rx_hwcksum(sc, m, rfa, len); 1421 1422 /* 1423 * If the packet is small enough to fit in a 1424 * single header mbuf, allocate one and copy 1425 * the data into it. This greatly reduces 1426 * memory consumption when we receive lots 1427 * of small packets. 1428 * 1429 * Otherwise, we add a new buffer to the receive 1430 * chain. If this fails, we drop the packet and 1431 * recycle the old buffer. 1432 */ 1433 if (fxp_copy_small != 0 && len <= MHLEN) { 1434 MGETHDR(m0, M_DONTWAIT, MT_DATA); 1435 if (m0 == NULL) 1436 goto dropit; 1437 MCLAIM(m0, &sc->sc_ethercom.ec_rx_mowner); 1438 memcpy(mtod(m0, void *), 1439 mtod(m, void *), len); 1440 m0->m_pkthdr.csum_flags = m->m_pkthdr.csum_flags; 1441 m0->m_pkthdr.csum_data = m->m_pkthdr.csum_data; 1442 FXP_INIT_RFABUF(sc, m); 1443 m = m0; 1444 } else { 1445 if (fxp_add_rfabuf(sc, rxmap, 1) != 0) { 1446 dropit: 1447 ifp->if_ierrors++; 1448 FXP_INIT_RFABUF(sc, m); 1449 continue; 1450 } 1451 } 1452 1453 m->m_pkthdr.rcvif = ifp; 1454 m->m_pkthdr.len = m->m_len = len; 1455 1456 /* 1457 * Pass this up to any BPF listeners, but only 1458 * pass it up the stack if it's for us. 1459 */ 1460 bpf_mtap(ifp, m); 1461 1462 /* Pass it on. */ 1463 (*ifp->if_input)(ifp, m); 1464 } 1465} 1466 1467/* 1468 * Update packet in/out/collision statistics. The i82557 doesn't 1469 * allow you to access these counters without doing a fairly 1470 * expensive DMA to get _all_ of the statistics it maintains, so 1471 * we do this operation here only once per second. The statistics 1472 * counters in the kernel are updated from the previous dump-stats 1473 * DMA and then a new dump-stats DMA is started. The on-chip 1474 * counters are zeroed when the DMA completes. If we can't start 1475 * the DMA immediately, we don't wait - we just prepare to read 1476 * them again next time. 1477 */ 1478void 1479fxp_tick(void *arg) 1480{ 1481 struct fxp_softc *sc = arg; 1482 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1483 struct fxp_stats *sp = &sc->sc_control_data->fcd_stats; 1484 int s; 1485 1486 if (!device_is_active(sc->sc_dev)) 1487 return; 1488 1489 s = splnet(); 1490 1491 FXP_CDSTATSSYNC(sc, BUS_DMASYNC_POSTREAD); 1492 1493 ifp->if_opackets += le32toh(sp->tx_good); 1494 ifp->if_collisions += le32toh(sp->tx_total_collisions); 1495 if (sp->rx_good) { 1496 ifp->if_ipackets += le32toh(sp->rx_good); 1497 sc->sc_rxidle = 0; 1498 } else if (sc->sc_flags & FXPF_RECV_WORKAROUND) { 1499 sc->sc_rxidle++; 1500 } 1501 ifp->if_ierrors += 1502 le32toh(sp->rx_crc_errors) + 1503 le32toh(sp->rx_alignment_errors) + 1504 le32toh(sp->rx_rnr_errors) + 1505 le32toh(sp->rx_overrun_errors); 1506 /* 1507 * If any transmit underruns occurred, bump up the transmit 1508 * threshold by another 512 bytes (64 * 8). 1509 */ 1510 if (sp->tx_underruns) { 1511 ifp->if_oerrors += le32toh(sp->tx_underruns); 1512 if (tx_threshold < 192) 1513 tx_threshold += 64; 1514 } 1515#ifdef FXP_EVENT_COUNTERS 1516 if (sc->sc_flags & FXPF_FC) { 1517 sc->sc_ev_txpause.ev_count += sp->tx_pauseframes; 1518 sc->sc_ev_rxpause.ev_count += sp->rx_pauseframes; 1519 } 1520#endif 1521 1522 /* 1523 * If we haven't received any packets in FXP_MAX_RX_IDLE seconds, 1524 * then assume the receiver has locked up and attempt to clear 1525 * the condition by reprogramming the multicast filter (actually, 1526 * resetting the interface). This is a work-around for a bug in 1527 * the 82557 where the receiver locks up if it gets certain types 1528 * of garbage in the synchronization bits prior to the packet header. 1529 * This bug is supposed to only occur in 10Mbps mode, but has been 1530 * seen to occur in 100Mbps mode as well (perhaps due to a 10/100 1531 * speed transition). 1532 */ 1533 if (sc->sc_rxidle > FXP_MAX_RX_IDLE) { 1534 (void) fxp_init(ifp); 1535 splx(s); 1536 return; 1537 } 1538 /* 1539 * If there is no pending command, start another stats 1540 * dump. Otherwise punt for now. 1541 */ 1542 if (CSR_READ_1(sc, FXP_CSR_SCB_COMMAND) == 0) { 1543 /* 1544 * Start another stats dump. 1545 */ 1546 FXP_CDSTATSSYNC(sc, BUS_DMASYNC_PREREAD); 1547 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_DUMPRESET); 1548 } else { 1549 /* 1550 * A previous command is still waiting to be accepted. 1551 * Just zero our copy of the stats and wait for the 1552 * next timer event to update them. 1553 */ 1554 /* BIG_ENDIAN: no swap required to store 0 */ 1555 sp->tx_good = 0; 1556 sp->tx_underruns = 0; 1557 sp->tx_total_collisions = 0; 1558 1559 sp->rx_good = 0; 1560 sp->rx_crc_errors = 0; 1561 sp->rx_alignment_errors = 0; 1562 sp->rx_rnr_errors = 0; 1563 sp->rx_overrun_errors = 0; 1564 if (sc->sc_flags & FXPF_FC) { 1565 sp->tx_pauseframes = 0; 1566 sp->rx_pauseframes = 0; 1567 } 1568 } 1569 1570 if (sc->sc_flags & FXPF_MII) { 1571 /* Tick the MII clock. */ 1572 mii_tick(&sc->sc_mii); 1573 } 1574 1575 splx(s); 1576 1577 /* 1578 * Schedule another timeout one second from now. 1579 */ 1580 callout_reset(&sc->sc_callout, hz, fxp_tick, sc); 1581} 1582 1583/* 1584 * Drain the receive queue. 1585 */ 1586void 1587fxp_rxdrain(struct fxp_softc *sc) 1588{ 1589 bus_dmamap_t rxmap; 1590 struct mbuf *m; 1591 1592 for (;;) { 1593 IF_DEQUEUE(&sc->sc_rxq, m); 1594 if (m == NULL) 1595 break; 1596 rxmap = M_GETCTX(m, bus_dmamap_t); 1597 bus_dmamap_unload(sc->sc_dmat, rxmap); 1598 FXP_RXMAP_PUT(sc, rxmap); 1599 m_freem(m); 1600 } 1601} 1602 1603/* 1604 * Stop the interface. Cancels the statistics updater and resets 1605 * the interface. 1606 */ 1607void 1608fxp_stop(struct ifnet *ifp, int disable) 1609{ 1610 struct fxp_softc *sc = ifp->if_softc; 1611 struct fxp_txsoft *txs; 1612 int i; 1613 1614 /* 1615 * Turn down interface (done early to avoid bad interactions 1616 * between panics, shutdown hooks, and the watchdog timer) 1617 */ 1618 ifp->if_timer = 0; 1619 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 1620 1621 /* 1622 * Cancel stats updater. 1623 */ 1624 callout_stop(&sc->sc_callout); 1625 if (sc->sc_flags & FXPF_MII) { 1626 /* Down the MII. */ 1627 mii_down(&sc->sc_mii); 1628 } 1629 1630 /* 1631 * Issue software reset. This unloads any microcode that 1632 * might already be loaded. 1633 */ 1634 sc->sc_flags &= ~FXPF_UCODE_LOADED; 1635 CSR_WRITE_4(sc, FXP_CSR_PORT, FXP_PORT_SOFTWARE_RESET); 1636 DELAY(50); 1637 1638 /* 1639 * Release any xmit buffers. 1640 */ 1641 for (i = 0; i < FXP_NTXCB; i++) { 1642 txs = FXP_DSTX(sc, i); 1643 if (txs->txs_mbuf != NULL) { 1644 bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap); 1645 m_freem(txs->txs_mbuf); 1646 txs->txs_mbuf = NULL; 1647 } 1648 } 1649 sc->sc_txpending = 0; 1650 1651 if (disable) { 1652 fxp_rxdrain(sc); 1653 fxp_disable(sc); 1654 } 1655 1656} 1657 1658/* 1659 * Watchdog/transmission transmit timeout handler. Called when a 1660 * transmission is started on the interface, but no interrupt is 1661 * received before the timeout. This usually indicates that the 1662 * card has wedged for some reason. 1663 */ 1664void 1665fxp_watchdog(struct ifnet *ifp) 1666{ 1667 struct fxp_softc *sc = ifp->if_softc; 1668 1669 log(LOG_ERR, "%s: device timeout\n", device_xname(sc->sc_dev)); 1670 ifp->if_oerrors++; 1671 1672 (void) fxp_init(ifp); 1673} 1674 1675/* 1676 * Initialize the interface. Must be called at splnet(). 1677 */ 1678int 1679fxp_init(struct ifnet *ifp) 1680{ 1681 struct fxp_softc *sc = ifp->if_softc; 1682 struct fxp_cb_config *cbp; 1683 struct fxp_cb_ias *cb_ias; 1684 struct fxp_txdesc *txd; 1685 bus_dmamap_t rxmap; 1686 int i, prm, save_bf, lrxen, vlan_drop, allm, error = 0; 1687 uint16_t status; 1688 1689 if ((error = fxp_enable(sc)) != 0) 1690 goto out; 1691 1692 /* 1693 * Cancel any pending I/O 1694 */ 1695 fxp_stop(ifp, 0); 1696 1697 /* 1698 * XXX just setting sc_flags to 0 here clears any FXPF_MII 1699 * flag, and this prevents the MII from detaching resulting in 1700 * a panic. The flags field should perhaps be split in runtime 1701 * flags and more static information. For now, just clear the 1702 * only other flag set. 1703 */ 1704 1705 sc->sc_flags &= ~FXPF_WANTINIT; 1706 1707 /* 1708 * Initialize base of CBL and RFA memory. Loading with zero 1709 * sets it up for regular linear addressing. 1710 */ 1711 fxp_scb_wait(sc); 1712 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, 0); 1713 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_BASE); 1714 1715 fxp_scb_wait(sc); 1716 fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_BASE); 1717 1718 /* 1719 * Initialize the multicast filter. Do this now, since we might 1720 * have to setup the config block differently. 1721 */ 1722 fxp_mc_setup(sc); 1723 1724 prm = (ifp->if_flags & IFF_PROMISC) ? 1 : 0; 1725 allm = (ifp->if_flags & IFF_ALLMULTI) ? 1 : 0; 1726 1727 /* 1728 * In order to support receiving 802.1Q VLAN frames, we have to 1729 * enable "save bad frames", since they are 4 bytes larger than 1730 * the normal Ethernet maximum frame length. On i82558 and later, 1731 * we have a better mechanism for this. 1732 */ 1733 save_bf = 0; 1734 lrxen = 0; 1735 vlan_drop = 0; 1736 if (sc->sc_ethercom.ec_capenable & ETHERCAP_VLAN_MTU) { 1737 if (sc->sc_rev < FXP_REV_82558_A4) 1738 save_bf = 1; 1739 else 1740 lrxen = 1; 1741 if (sc->sc_rev >= FXP_REV_82550) 1742 vlan_drop = 1; 1743 } 1744 1745 /* 1746 * Initialize base of dump-stats buffer. 1747 */ 1748 fxp_scb_wait(sc); 1749 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, 1750 sc->sc_cddma + FXP_CDSTATSOFF); 1751 FXP_CDSTATSSYNC(sc, BUS_DMASYNC_PREREAD); 1752 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_DUMP_ADR); 1753 1754 cbp = &sc->sc_control_data->fcd_configcb; 1755 memset(cbp, 0, sizeof(struct fxp_cb_config)); 1756 1757 /* 1758 * Load microcode for this controller. 1759 */ 1760 fxp_load_ucode(sc); 1761 1762 if ((sc->sc_ethercom.ec_if.if_flags & IFF_LINK1)) 1763 sc->sc_flags |= FXPF_RECV_WORKAROUND; 1764 else 1765 sc->sc_flags &= ~FXPF_RECV_WORKAROUND; 1766 1767 /* 1768 * This copy is kind of disgusting, but there are a bunch of must be 1769 * zero and must be one bits in this structure and this is the easiest 1770 * way to initialize them all to proper values. 1771 */ 1772 memcpy(cbp, fxp_cb_config_template, sizeof(fxp_cb_config_template)); 1773 1774 /* BIG_ENDIAN: no need to swap to store 0 */ 1775 cbp->cb_status = 0; 1776 cbp->cb_command = htole16(FXP_CB_COMMAND_CONFIG | 1777 FXP_CB_COMMAND_EL); 1778 /* BIG_ENDIAN: no need to swap to store 0xffffffff */ 1779 cbp->link_addr = 0xffffffff; /* (no) next command */ 1780 /* bytes in config block */ 1781 cbp->byte_count = (sc->sc_flags & FXPF_EXT_RFA) ? 1782 FXP_EXT_CONFIG_LEN : FXP_CONFIG_LEN; 1783 cbp->rx_fifo_limit = 8; /* rx fifo threshold (32 bytes) */ 1784 cbp->tx_fifo_limit = 0; /* tx fifo threshold (0 bytes) */ 1785 cbp->adaptive_ifs = 0; /* (no) adaptive interframe spacing */ 1786 cbp->mwi_enable = (sc->sc_flags & FXPF_MWI) ? 1 : 0; 1787 cbp->type_enable = 0; /* actually reserved */ 1788 cbp->read_align_en = (sc->sc_flags & FXPF_READ_ALIGN) ? 1 : 0; 1789 cbp->end_wr_on_cl = (sc->sc_flags & FXPF_WRITE_ALIGN) ? 1 : 0; 1790 cbp->rx_dma_bytecount = 0; /* (no) rx DMA max */ 1791 cbp->tx_dma_bytecount = 0; /* (no) tx DMA max */ 1792 cbp->dma_mbce = 0; /* (disable) dma max counters */ 1793 cbp->late_scb = 0; /* (don't) defer SCB update */ 1794 cbp->tno_int_or_tco_en =0; /* (disable) tx not okay interrupt */ 1795 cbp->ci_int = 1; /* interrupt on CU idle */ 1796 cbp->ext_txcb_dis = (sc->sc_flags & FXPF_EXT_TXCB) ? 0 : 1; 1797 cbp->ext_stats_dis = 1; /* disable extended counters */ 1798 cbp->keep_overrun_rx = 0; /* don't pass overrun frames to host */ 1799 cbp->save_bf = save_bf;/* save bad frames */ 1800 cbp->disc_short_rx = !prm; /* discard short packets */ 1801 cbp->underrun_retry = 1; /* retry mode (1) on DMA underrun */ 1802 cbp->ext_rfa = (sc->sc_flags & FXPF_EXT_RFA) ? 1 : 0; 1803 cbp->two_frames = 0; /* do not limit FIFO to 2 frames */ 1804 cbp->dyn_tbd = 0; /* (no) dynamic TBD mode */ 1805 /* interface mode */ 1806 cbp->mediatype = (sc->sc_flags & FXPF_MII) ? 1 : 0; 1807 cbp->csma_dis = 0; /* (don't) disable link */ 1808 cbp->tcp_udp_cksum = (sc->sc_flags & FXPF_82559_RXCSUM) ? 1 : 0; 1809 /* (don't) enable RX checksum */ 1810 cbp->vlan_tco = 0; /* (don't) enable vlan wakeup */ 1811 cbp->link_wake_en = 0; /* (don't) assert PME# on link change */ 1812 cbp->arp_wake_en = 0; /* (don't) assert PME# on arp */ 1813 cbp->mc_wake_en = 0; /* (don't) assert PME# on mcmatch */ 1814 cbp->nsai = 1; /* (don't) disable source addr insert */ 1815 cbp->preamble_length = 2; /* (7 byte) preamble */ 1816 cbp->loopback = 0; /* (don't) loopback */ 1817 cbp->linear_priority = 0; /* (normal CSMA/CD operation) */ 1818 cbp->linear_pri_mode = 0; /* (wait after xmit only) */ 1819 cbp->interfrm_spacing = 6; /* (96 bits of) interframe spacing */ 1820 cbp->promiscuous = prm; /* promiscuous mode */ 1821 cbp->bcast_disable = 0; /* (don't) disable broadcasts */ 1822 cbp->wait_after_win = 0; /* (don't) enable modified backoff alg*/ 1823 cbp->ignore_ul = 0; /* consider U/L bit in IA matching */ 1824 cbp->crc16_en = 0; /* (don't) enable crc-16 algorithm */ 1825 cbp->crscdt = (sc->sc_flags & FXPF_MII) ? 0 : 1; 1826 cbp->stripping = !prm; /* truncate rx packet to byte count */ 1827 cbp->padding = 1; /* (do) pad short tx packets */ 1828 cbp->rcv_crc_xfer = 0; /* (don't) xfer CRC to host */ 1829 cbp->long_rx_en = lrxen; /* long packet receive enable */ 1830 cbp->ia_wake_en = 0; /* (don't) wake up on address match */ 1831 cbp->magic_pkt_dis = 0; /* (don't) disable magic packet */ 1832 /* must set wake_en in PMCSR also */ 1833 cbp->force_fdx = 0; /* (don't) force full duplex */ 1834 cbp->fdx_pin_en = 1; /* (enable) FDX# pin */ 1835 cbp->multi_ia = 0; /* (don't) accept multiple IAs */ 1836 cbp->mc_all = allm; /* accept all multicasts */ 1837 cbp->ext_rx_mode = (sc->sc_flags & FXPF_EXT_RFA) ? 1 : 0; 1838 cbp->vlan_drop_en = vlan_drop; 1839 1840 if (!(sc->sc_flags & FXPF_FC)) { 1841 /* 1842 * The i82557 has no hardware flow control, the values 1843 * here are the defaults for the chip. 1844 */ 1845 cbp->fc_delay_lsb = 0; 1846 cbp->fc_delay_msb = 0x40; 1847 cbp->pri_fc_thresh = 3; 1848 cbp->tx_fc_dis = 0; 1849 cbp->rx_fc_restop = 0; 1850 cbp->rx_fc_restart = 0; 1851 cbp->fc_filter = 0; 1852 cbp->pri_fc_loc = 1; 1853 } else { 1854 cbp->fc_delay_lsb = 0x1f; 1855 cbp->fc_delay_msb = 0x01; 1856 cbp->pri_fc_thresh = 3; 1857 cbp->tx_fc_dis = 0; /* enable transmit FC */ 1858 cbp->rx_fc_restop = 1; /* enable FC restop frames */ 1859 cbp->rx_fc_restart = 1; /* enable FC restart frames */ 1860 cbp->fc_filter = !prm; /* drop FC frames to host */ 1861 cbp->pri_fc_loc = 1; /* FC pri location (byte31) */ 1862 cbp->ext_stats_dis = 0; /* enable extended stats */ 1863 } 1864 1865 FXP_CDCONFIGSYNC(sc, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1866 1867 /* 1868 * Start the config command/DMA. 1869 */ 1870 fxp_scb_wait(sc); 1871 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->sc_cddma + FXP_CDCONFIGOFF); 1872 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); 1873 /* ...and wait for it to complete. */ 1874 for (i = 1000; i > 0; i--) { 1875 FXP_CDCONFIGSYNC(sc, 1876 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 1877 status = le16toh(cbp->cb_status); 1878 FXP_CDCONFIGSYNC(sc, BUS_DMASYNC_PREREAD); 1879 if ((status & FXP_CB_STATUS_C) != 0) 1880 break; 1881 DELAY(1); 1882 } 1883 if (i == 0) { 1884 log(LOG_WARNING, "%s: line %d: dmasync timeout\n", 1885 device_xname(sc->sc_dev), __LINE__); 1886 return (ETIMEDOUT); 1887 } 1888 1889 /* 1890 * Initialize the station address. 1891 */ 1892 cb_ias = &sc->sc_control_data->fcd_iascb; 1893 /* BIG_ENDIAN: no need to swap to store 0 */ 1894 cb_ias->cb_status = 0; 1895 cb_ias->cb_command = htole16(FXP_CB_COMMAND_IAS | FXP_CB_COMMAND_EL); 1896 /* BIG_ENDIAN: no need to swap to store 0xffffffff */ 1897 cb_ias->link_addr = 0xffffffff; 1898 memcpy(cb_ias->macaddr, CLLADDR(ifp->if_sadl), ETHER_ADDR_LEN); 1899 1900 FXP_CDIASSYNC(sc, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1901 1902 /* 1903 * Start the IAS (Individual Address Setup) command/DMA. 1904 */ 1905 fxp_scb_wait(sc); 1906 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->sc_cddma + FXP_CDIASOFF); 1907 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); 1908 /* ...and wait for it to complete. */ 1909 for (i = 1000; i > 0; i++) { 1910 FXP_CDIASSYNC(sc, 1911 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 1912 status = le16toh(cb_ias->cb_status); 1913 FXP_CDIASSYNC(sc, BUS_DMASYNC_PREREAD); 1914 if ((status & FXP_CB_STATUS_C) != 0) 1915 break; 1916 DELAY(1); 1917 } 1918 if (i == 0) { 1919 log(LOG_WARNING, "%s: line %d: dmasync timeout\n", 1920 device_xname(sc->sc_dev), __LINE__); 1921 return (ETIMEDOUT); 1922 } 1923 1924 /* 1925 * Initialize the transmit descriptor ring. txlast is initialized 1926 * to the end of the list so that it will wrap around to the first 1927 * descriptor when the first packet is transmitted. 1928 */ 1929 for (i = 0; i < FXP_NTXCB; i++) { 1930 txd = FXP_CDTX(sc, i); 1931 memset(txd, 0, sizeof(*txd)); 1932 txd->txd_txcb.cb_command = 1933 htole16(FXP_CB_COMMAND_NOP | FXP_CB_COMMAND_S); 1934 txd->txd_txcb.link_addr = 1935 htole32(FXP_CDTXADDR(sc, FXP_NEXTTX(i))); 1936 if (sc->sc_flags & FXPF_EXT_TXCB) 1937 txd->txd_txcb.tbd_array_addr = 1938 htole32(FXP_CDTBDADDR(sc, i) + 1939 (2 * sizeof(struct fxp_tbd))); 1940 else 1941 txd->txd_txcb.tbd_array_addr = 1942 htole32(FXP_CDTBDADDR(sc, i)); 1943 FXP_CDTXSYNC(sc, i, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1944 } 1945 sc->sc_txpending = 0; 1946 sc->sc_txdirty = 0; 1947 sc->sc_txlast = FXP_NTXCB - 1; 1948 1949 /* 1950 * Initialize the receive buffer list. 1951 */ 1952 sc->sc_rxq.ifq_maxlen = FXP_NRFABUFS; 1953 while (sc->sc_rxq.ifq_len < FXP_NRFABUFS) { 1954 rxmap = FXP_RXMAP_GET(sc); 1955 if ((error = fxp_add_rfabuf(sc, rxmap, 0)) != 0) { 1956 log(LOG_ERR, "%s: unable to allocate or map rx " 1957 "buffer %d, error = %d\n", 1958 device_xname(sc->sc_dev), 1959 sc->sc_rxq.ifq_len, error); 1960 /* 1961 * XXX Should attempt to run with fewer receive 1962 * XXX buffers instead of just failing. 1963 */ 1964 FXP_RXMAP_PUT(sc, rxmap); 1965 fxp_rxdrain(sc); 1966 goto out; 1967 } 1968 } 1969 sc->sc_rxidle = 0; 1970 1971 /* 1972 * Give the transmit ring to the chip. We do this by pointing 1973 * the chip at the last descriptor (which is a NOP|SUSPEND), and 1974 * issuing a start command. It will execute the NOP and then 1975 * suspend, pointing at the first descriptor. 1976 */ 1977 fxp_scb_wait(sc); 1978 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, FXP_CDTXADDR(sc, sc->sc_txlast)); 1979 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); 1980 1981 /* 1982 * Initialize receiver buffer area - RFA. 1983 */ 1984#if 0 /* initialization will be done by FXP_SCB_INTRCNTL_REQUEST_SWI later */ 1985 rxmap = M_GETCTX(sc->sc_rxq.ifq_head, bus_dmamap_t); 1986 fxp_scb_wait(sc); 1987 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, 1988 rxmap->dm_segs[0].ds_addr + RFA_ALIGNMENT_FUDGE); 1989 fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_START); 1990#endif 1991 1992 if (sc->sc_flags & FXPF_MII) { 1993 /* 1994 * Set current media. 1995 */ 1996 if ((error = mii_ifmedia_change(&sc->sc_mii)) != 0) 1997 goto out; 1998 } 1999 2000 /* 2001 * ...all done! 2002 */ 2003 ifp->if_flags |= IFF_RUNNING; 2004 ifp->if_flags &= ~IFF_OACTIVE; 2005 2006 /* 2007 * Request a software generated interrupt that will be used to 2008 * (re)start the RU processing. If we direct the chip to start 2009 * receiving from the start of queue now, instead of letting the 2010 * interrupt handler first process all received packets, we run 2011 * the risk of having it overwrite mbuf clusters while they are 2012 * being processed or after they have been returned to the pool. 2013 */ 2014 CSR_WRITE_1(sc, FXP_CSR_SCB_INTRCNTL, FXP_SCB_INTRCNTL_REQUEST_SWI); 2015 2016 /* 2017 * Start the one second timer. 2018 */ 2019 callout_reset(&sc->sc_callout, hz, fxp_tick, sc); 2020 2021 /* 2022 * Attempt to start output on the interface. 2023 */ 2024 fxp_start(ifp); 2025 2026 out: 2027 if (error) { 2028 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 2029 ifp->if_timer = 0; 2030 log(LOG_ERR, "%s: interface not running\n", 2031 device_xname(sc->sc_dev)); 2032 } 2033 return (error); 2034} 2035 2036/* 2037 * Notify the world which media we're using. 2038 */ 2039void 2040fxp_mii_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr) 2041{ 2042 struct fxp_softc *sc = ifp->if_softc; 2043 2044 if (sc->sc_enabled == 0) { 2045 ifmr->ifm_active = IFM_ETHER | IFM_NONE; 2046 ifmr->ifm_status = 0; 2047 return; 2048 } 2049 2050 ether_mediastatus(ifp, ifmr); 2051} 2052 2053int 2054fxp_80c24_mediachange(struct ifnet *ifp) 2055{ 2056 2057 /* Nothing to do here. */ 2058 return (0); 2059} 2060 2061void 2062fxp_80c24_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr) 2063{ 2064 struct fxp_softc *sc = ifp->if_softc; 2065 2066 /* 2067 * Media is currently-selected media. We cannot determine 2068 * the link status. 2069 */ 2070 ifmr->ifm_status = 0; 2071 ifmr->ifm_active = sc->sc_mii.mii_media.ifm_cur->ifm_media; 2072} 2073 2074/* 2075 * Add a buffer to the end of the RFA buffer list. 2076 * Return 0 if successful, error code on failure. 2077 * 2078 * The RFA struct is stuck at the beginning of mbuf cluster and the 2079 * data pointer is fixed up to point just past it. 2080 */ 2081int 2082fxp_add_rfabuf(struct fxp_softc *sc, bus_dmamap_t rxmap, int unload) 2083{ 2084 struct mbuf *m; 2085 int error; 2086 2087 MGETHDR(m, M_DONTWAIT, MT_DATA); 2088 if (m == NULL) 2089 return (ENOBUFS); 2090 2091 MCLAIM(m, &sc->sc_ethercom.ec_rx_mowner); 2092 MCLGET(m, M_DONTWAIT); 2093 if ((m->m_flags & M_EXT) == 0) { 2094 m_freem(m); 2095 return (ENOBUFS); 2096 } 2097 2098 if (unload) 2099 bus_dmamap_unload(sc->sc_dmat, rxmap); 2100 2101 M_SETCTX(m, rxmap); 2102 2103 m->m_len = m->m_pkthdr.len = m->m_ext.ext_size; 2104 error = bus_dmamap_load_mbuf(sc->sc_dmat, rxmap, m, 2105 BUS_DMA_READ|BUS_DMA_NOWAIT); 2106 if (error) { 2107 /* XXX XXX XXX */ 2108 aprint_error_dev(sc->sc_dev, 2109 "can't load rx DMA map %d, error = %d\n", 2110 sc->sc_rxq.ifq_len, error); 2111 panic("fxp_add_rfabuf"); 2112 } 2113 2114 FXP_INIT_RFABUF(sc, m); 2115 2116 return (0); 2117} 2118 2119int 2120fxp_mdi_read(device_t self, int phy, int reg) 2121{ 2122 struct fxp_softc *sc = device_private(self); 2123 int count = 10000; 2124 int value; 2125 2126 CSR_WRITE_4(sc, FXP_CSR_MDICONTROL, 2127 (FXP_MDI_READ << 26) | (reg << 16) | (phy << 21)); 2128 2129 while (((value = CSR_READ_4(sc, FXP_CSR_MDICONTROL)) & 2130 0x10000000) == 0 && count--) 2131 DELAY(10); 2132 2133 if (count <= 0) 2134 log(LOG_WARNING, 2135 "%s: fxp_mdi_read: timed out\n", device_xname(self)); 2136 2137 return (value & 0xffff); 2138} 2139 2140void 2141fxp_statchg(device_t self) 2142{ 2143 2144 /* Nothing to do. */ 2145} 2146 2147void 2148fxp_mdi_write(device_t self, int phy, int reg, int value) 2149{ 2150 struct fxp_softc *sc = device_private(self); 2151 int count = 10000; 2152 2153 CSR_WRITE_4(sc, FXP_CSR_MDICONTROL, 2154 (FXP_MDI_WRITE << 26) | (reg << 16) | (phy << 21) | 2155 (value & 0xffff)); 2156 2157 while ((CSR_READ_4(sc, FXP_CSR_MDICONTROL) & 0x10000000) == 0 && 2158 count--) 2159 DELAY(10); 2160 2161 if (count <= 0) 2162 log(LOG_WARNING, 2163 "%s: fxp_mdi_write: timed out\n", device_xname(self)); 2164} 2165 2166int 2167fxp_ioctl(struct ifnet *ifp, u_long cmd, void *data) 2168{ 2169 struct fxp_softc *sc = ifp->if_softc; 2170 struct ifreq *ifr = (struct ifreq *)data; 2171 int s, error; 2172 2173 s = splnet(); 2174 2175 switch (cmd) { 2176 case SIOCSIFMEDIA: 2177 case SIOCGIFMEDIA: 2178 error = ifmedia_ioctl(ifp, ifr, &sc->sc_mii.mii_media, cmd); 2179 break; 2180 2181 default: 2182 if ((error = ether_ioctl(ifp, cmd, data)) != ENETRESET) 2183 break; 2184 2185 error = 0; 2186 2187 if (cmd != SIOCADDMULTI && cmd != SIOCDELMULTI) 2188 ; 2189 else if (ifp->if_flags & IFF_RUNNING) { 2190 /* 2191 * Multicast list has changed; set the 2192 * hardware filter accordingly. 2193 */ 2194 while (sc->sc_txpending) { 2195 sc->sc_flags |= FXPF_WANTINIT; 2196 tsleep(sc, PSOCK, "fxp_init", 0); 2197 } 2198 error = fxp_init(ifp); 2199 } 2200 break; 2201 } 2202 2203 /* Try to get more packets going. */ 2204 if (sc->sc_enabled) 2205 fxp_start(ifp); 2206 2207 splx(s); 2208 return (error); 2209} 2210 2211/* 2212 * Program the multicast filter. 2213 * 2214 * This function must be called at splnet(). 2215 */ 2216void 2217fxp_mc_setup(struct fxp_softc *sc) 2218{ 2219 struct fxp_cb_mcs *mcsp = &sc->sc_control_data->fcd_mcscb; 2220 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 2221 struct ethercom *ec = &sc->sc_ethercom; 2222 struct ether_multi *enm; 2223 struct ether_multistep step; 2224 int count, nmcasts; 2225 uint16_t status; 2226 2227#ifdef DIAGNOSTIC 2228 if (sc->sc_txpending) 2229 panic("fxp_mc_setup: pending transmissions"); 2230#endif 2231 2232 2233 if (ifp->if_flags & IFF_PROMISC) { 2234 ifp->if_flags |= IFF_ALLMULTI; 2235 return; 2236 } else { 2237 ifp->if_flags &= ~IFF_ALLMULTI; 2238 } 2239 2240 /* 2241 * Initialize multicast setup descriptor. 2242 */ 2243 nmcasts = 0; 2244 ETHER_FIRST_MULTI(step, ec, enm); 2245 while (enm != NULL) { 2246 /* 2247 * Check for too many multicast addresses or if we're 2248 * listening to a range. Either way, we simply have 2249 * to accept all multicasts. 2250 */ 2251 if (nmcasts >= MAXMCADDR || 2252 memcmp(enm->enm_addrlo, enm->enm_addrhi, 2253 ETHER_ADDR_LEN) != 0) { 2254 /* 2255 * Callers of this function must do the 2256 * right thing with this. If we're called 2257 * from outside fxp_init(), the caller must 2258 * detect if the state if IFF_ALLMULTI changes. 2259 * If it does, the caller must then call 2260 * fxp_init(), since allmulti is handled by 2261 * the config block. 2262 */ 2263 ifp->if_flags |= IFF_ALLMULTI; 2264 return; 2265 } 2266 memcpy(&mcsp->mc_addr[nmcasts][0], enm->enm_addrlo, 2267 ETHER_ADDR_LEN); 2268 nmcasts++; 2269 ETHER_NEXT_MULTI(step, enm); 2270 } 2271 2272 /* BIG_ENDIAN: no need to swap to store 0 */ 2273 mcsp->cb_status = 0; 2274 mcsp->cb_command = htole16(FXP_CB_COMMAND_MCAS | FXP_CB_COMMAND_EL); 2275 mcsp->link_addr = htole32(FXP_CDTXADDR(sc, FXP_NEXTTX(sc->sc_txlast))); 2276 mcsp->mc_cnt = htole16(nmcasts * ETHER_ADDR_LEN); 2277 2278 FXP_CDMCSSYNC(sc, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 2279 2280 /* 2281 * Wait until the command unit is not active. This should never 2282 * happen since nothing is queued, but make sure anyway. 2283 */ 2284 count = 100; 2285 while ((CSR_READ_1(sc, FXP_CSR_SCB_RUSCUS) >> 6) == 2286 FXP_SCB_CUS_ACTIVE && --count) 2287 DELAY(1); 2288 if (count == 0) { 2289 log(LOG_WARNING, "%s: line %d: command queue timeout\n", 2290 device_xname(sc->sc_dev), __LINE__); 2291 return; 2292 } 2293 2294 /* 2295 * Start the multicast setup command/DMA. 2296 */ 2297 fxp_scb_wait(sc); 2298 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->sc_cddma + FXP_CDMCSOFF); 2299 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); 2300 2301 /* ...and wait for it to complete. */ 2302 for (count = 1000; count > 0; count--) { 2303 FXP_CDMCSSYNC(sc, 2304 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 2305 status = le16toh(mcsp->cb_status); 2306 FXP_CDMCSSYNC(sc, BUS_DMASYNC_PREREAD); 2307 if ((status & FXP_CB_STATUS_C) != 0) 2308 break; 2309 DELAY(1); 2310 } 2311 if (count == 0) { 2312 log(LOG_WARNING, "%s: line %d: dmasync timeout\n", 2313 device_xname(sc->sc_dev), __LINE__); 2314 return; 2315 } 2316} 2317 2318static const uint32_t fxp_ucode_d101a[] = D101_A_RCVBUNDLE_UCODE; 2319static const uint32_t fxp_ucode_d101b0[] = D101_B0_RCVBUNDLE_UCODE; 2320static const uint32_t fxp_ucode_d101ma[] = D101M_B_RCVBUNDLE_UCODE; 2321static const uint32_t fxp_ucode_d101s[] = D101S_RCVBUNDLE_UCODE; 2322static const uint32_t fxp_ucode_d102[] = D102_B_RCVBUNDLE_UCODE; 2323static const uint32_t fxp_ucode_d102c[] = D102_C_RCVBUNDLE_UCODE; 2324static const uint32_t fxp_ucode_d102e[] = D102_E_RCVBUNDLE_UCODE; 2325 2326#define UCODE(x) x, sizeof(x)/sizeof(uint32_t) 2327 2328static const struct ucode { 2329 int32_t revision; 2330 const uint32_t *ucode; 2331 size_t length; 2332 uint16_t int_delay_offset; 2333 uint16_t bundle_max_offset; 2334} ucode_table[] = { 2335 { FXP_REV_82558_A4, UCODE(fxp_ucode_d101a), 2336 D101_CPUSAVER_DWORD, 0 }, 2337 2338 { FXP_REV_82558_B0, UCODE(fxp_ucode_d101b0), 2339 D101_CPUSAVER_DWORD, 0 }, 2340 2341 { FXP_REV_82559_A0, UCODE(fxp_ucode_d101ma), 2342 D101M_CPUSAVER_DWORD, D101M_CPUSAVER_BUNDLE_MAX_DWORD }, 2343 2344 { FXP_REV_82559S_A, UCODE(fxp_ucode_d101s), 2345 D101S_CPUSAVER_DWORD, D101S_CPUSAVER_BUNDLE_MAX_DWORD }, 2346 2347 { FXP_REV_82550, UCODE(fxp_ucode_d102), 2348 D102_B_CPUSAVER_DWORD, D102_B_CPUSAVER_BUNDLE_MAX_DWORD }, 2349 2350 { FXP_REV_82550_C, UCODE(fxp_ucode_d102c), 2351 D102_C_CPUSAVER_DWORD, D102_C_CPUSAVER_BUNDLE_MAX_DWORD }, 2352 2353 { FXP_REV_82551_F, UCODE(fxp_ucode_d102e), 2354 D102_E_CPUSAVER_DWORD, D102_E_CPUSAVER_BUNDLE_MAX_DWORD }, 2355 2356 { FXP_REV_82551_10, UCODE(fxp_ucode_d102e), 2357 D102_E_CPUSAVER_DWORD, D102_E_CPUSAVER_BUNDLE_MAX_DWORD }, 2358 2359 { 0, NULL, 0, 0, 0 } 2360}; 2361 2362void 2363fxp_load_ucode(struct fxp_softc *sc) 2364{ 2365 const struct ucode *uc; 2366 struct fxp_cb_ucode *cbp = &sc->sc_control_data->fcd_ucode; 2367 int count, i; 2368 uint16_t status; 2369 2370 if (sc->sc_flags & FXPF_UCODE_LOADED) 2371 return; 2372 2373 /* 2374 * Only load the uCode if the user has requested that 2375 * we do so. 2376 */ 2377 if ((sc->sc_ethercom.ec_if.if_flags & IFF_LINK0) == 0) { 2378 sc->sc_int_delay = 0; 2379 sc->sc_bundle_max = 0; 2380 return; 2381 } 2382 2383 for (uc = ucode_table; uc->ucode != NULL; uc++) { 2384 if (sc->sc_rev == uc->revision) 2385 break; 2386 } 2387 if (uc->ucode == NULL) 2388 return; 2389 2390 /* BIG ENDIAN: no need to swap to store 0 */ 2391 cbp->cb_status = 0; 2392 cbp->cb_command = htole16(FXP_CB_COMMAND_UCODE | FXP_CB_COMMAND_EL); 2393 cbp->link_addr = 0xffffffff; /* (no) next command */ 2394 for (i = 0; i < uc->length; i++) 2395 cbp->ucode[i] = htole32(uc->ucode[i]); 2396 2397 if (uc->int_delay_offset) 2398 *(volatile uint16_t *) &cbp->ucode[uc->int_delay_offset] = 2399 htole16(fxp_int_delay + (fxp_int_delay / 2)); 2400 2401 if (uc->bundle_max_offset) 2402 *(volatile uint16_t *) &cbp->ucode[uc->bundle_max_offset] = 2403 htole16(fxp_bundle_max); 2404 2405 FXP_CDUCODESYNC(sc, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 2406 2407 /* 2408 * Download the uCode to the chip. 2409 */ 2410 fxp_scb_wait(sc); 2411 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->sc_cddma + FXP_CDUCODEOFF); 2412 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); 2413 2414 /* ...and wait for it to complete. */ 2415 for (count = 10000; count > 0; count--) { 2416 FXP_CDUCODESYNC(sc, 2417 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 2418 status = le16toh(cbp->cb_status); 2419 FXP_CDUCODESYNC(sc, BUS_DMASYNC_PREREAD); 2420 if ((status & FXP_CB_STATUS_C) != 0) 2421 break; 2422 DELAY(2); 2423 } 2424 if (count == 0) { 2425 sc->sc_int_delay = 0; 2426 sc->sc_bundle_max = 0; 2427 log(LOG_WARNING, "%s: timeout loading microcode\n", 2428 device_xname(sc->sc_dev)); 2429 return; 2430 } 2431 2432 if (sc->sc_int_delay != fxp_int_delay || 2433 sc->sc_bundle_max != fxp_bundle_max) { 2434 sc->sc_int_delay = fxp_int_delay; 2435 sc->sc_bundle_max = fxp_bundle_max; 2436 log(LOG_INFO, "%s: Microcode loaded: int delay: %d usec, " 2437 "max bundle: %d\n", device_xname(sc->sc_dev), 2438 sc->sc_int_delay, 2439 uc->bundle_max_offset == 0 ? 0 : sc->sc_bundle_max); 2440 } 2441 2442 sc->sc_flags |= FXPF_UCODE_LOADED; 2443} 2444 2445int 2446fxp_enable(struct fxp_softc *sc) 2447{ 2448 2449 if (sc->sc_enabled == 0 && sc->sc_enable != NULL) { 2450 if ((*sc->sc_enable)(sc) != 0) { 2451 log(LOG_ERR, "%s: device enable failed\n", 2452 device_xname(sc->sc_dev)); 2453 return (EIO); 2454 } 2455 } 2456 2457 sc->sc_enabled = 1; 2458 return (0); 2459} 2460 2461void 2462fxp_disable(struct fxp_softc *sc) 2463{ 2464 2465 if (sc->sc_enabled != 0 && sc->sc_disable != NULL) { 2466 (*sc->sc_disable)(sc); 2467 sc->sc_enabled = 0; 2468 } 2469} 2470 2471/* 2472 * fxp_activate: 2473 * 2474 * Handle device activation/deactivation requests. 2475 */ 2476int 2477fxp_activate(device_t self, enum devact act) 2478{ 2479 struct fxp_softc *sc = device_private(self); 2480 2481 switch (act) { 2482 case DVACT_DEACTIVATE: 2483 if_deactivate(&sc->sc_ethercom.ec_if); 2484 return 0; 2485 default: 2486 return EOPNOTSUPP; 2487 } 2488} 2489 2490/* 2491 * fxp_detach: 2492 * 2493 * Detach an i82557 interface. 2494 */ 2495int 2496fxp_detach(struct fxp_softc *sc, int flags) 2497{ 2498 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 2499 int i, s; 2500 2501 /* Succeed now if there's no work to do. */ 2502 if ((sc->sc_flags & FXPF_ATTACHED) == 0) 2503 return (0); 2504 2505 s = splnet(); 2506 /* Stop the interface. Callouts are stopped in it. */ 2507 fxp_stop(ifp, 1); 2508 splx(s); 2509 2510 /* Destroy our callout. */ 2511 callout_destroy(&sc->sc_callout); 2512 2513 if (sc->sc_flags & FXPF_MII) { 2514 /* Detach all PHYs */ 2515 mii_detach(&sc->sc_mii, MII_PHY_ANY, MII_OFFSET_ANY); 2516 } 2517 2518 /* Delete all remaining media. */ 2519 ifmedia_delete_instance(&sc->sc_mii.mii_media, IFM_INST_ANY); 2520 2521 rnd_detach_source(&sc->rnd_source); 2522 ether_ifdetach(ifp); 2523 if_detach(ifp); 2524 2525 for (i = 0; i < FXP_NRFABUFS; i++) { 2526 bus_dmamap_unload(sc->sc_dmat, sc->sc_rxmaps[i]); 2527 bus_dmamap_destroy(sc->sc_dmat, sc->sc_rxmaps[i]); 2528 } 2529 2530 for (i = 0; i < FXP_NTXCB; i++) { 2531 bus_dmamap_unload(sc->sc_dmat, FXP_DSTX(sc, i)->txs_dmamap); 2532 bus_dmamap_destroy(sc->sc_dmat, FXP_DSTX(sc, i)->txs_dmamap); 2533 } 2534 2535 bus_dmamap_unload(sc->sc_dmat, sc->sc_dmamap); 2536 bus_dmamap_destroy(sc->sc_dmat, sc->sc_dmamap); 2537 bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_control_data, 2538 sizeof(struct fxp_control_data)); 2539 bus_dmamem_free(sc->sc_dmat, &sc->sc_cdseg, sc->sc_cdnseg); 2540 2541 return (0); 2542} 2543