1/* $NetBSD: cd18xxreg.h,v 1.3 2005/12/11 12:21:26 christos Exp $ */ 2 3/* 4 * Copyright (c) 1998, 2001 Matthew R. Green 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 21 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 22 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 23 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 24 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29/* 30 * cirrus-logic CL-CD180/CD1864/CD1865 register definitions, from the 31 * CL-CD1865 data book. 32 */ 33 34 35/* 36 * available registers for us. 37 * 38 * the cd1865 provides 4 types of registers: global, indexed indirect, 39 * channel, and unavailable. we should never touch the unavailable, as it 40 * may cause the cd1865 to fail. the indexed indirect registers are 41 * really pointers to the correct channel we are currently servicing, and 42 * as such must only be accessed during service-request service routines. 43 * global registers set and provide common functionality between all of 44 * the channels. channel registers only affect the specific channel. 45 * access to channel registers is limited to the current channel, as 46 * specified in the CAR register, ie. to access different channels, the CAR 47 * register must be changed first. 48 */ 49 50 51/* 52 * the registers themselves. 53 */ 54 55/* global registers */ 56#define CD18xx_GFRCR 0x6b /* global firmware revision code */ 57#define CD18xx_SRCR 0x66 /* service request configuration */ 58#define CD18xx_PPRH 0x70 /* prescaler period (high) */ 59#define CD18xx_PPRL 0x71 /* prescaler period (low) */ 60#define CD18xx_MSMR 0x61 /* modem service match */ 61#define CD18xx_TSMR 0x62 /* transmit service match */ 62#define CD18xx_RSMR 0x63 /* receive service match */ 63#define CD18xx_GSVR 0x40 /* global service vector */ 64#define CD18xx_SRSR 0x65 /* service request status */ 65#define CD18xx_MRAR 0x75 /* modem request acknowledge */ 66#define CD18xx_TRAR 0x76 /* transmit request acknowledge */ 67#define CD18xx_RRAR 0x77 /* receive request acknowledge */ 68#define CD18xx_GSCR1 0x41 /* global service channel (1) */ 69#define CD18xx_GSCR2 0x42 /* global service channel (2) */ 70#define CD18xx_GSCR3 0x43 /* global service channel (3) */ 71#define CD18xx_CAR 0x64 /* channel access register */ 72 73/* indexed indirect registers */ 74#define CD18xx_RDCR 0x07 /* receive data count */ 75#define CD18xx_RDR 0x78 /* receiver data register */ 76#define CD18xx_RCSR 0x7a /* receiver channel status */ 77#define CD18xx_TDR 0x7b /* transmit data register */ 78#define CD18xx_EOSRR 0x7f /* end of service request */ 79 80/* channel registers */ 81#define CD18xx_SRER 0x02 /* service request enable */ 82#define CD18xx_CCR 0x01 /* channel command */ 83#define CD18xx_COR1 0x03 /* channel option (1) */ 84#define CD18xx_COR2 0x04 /* channel option (2) */ 85#define CD18xx_COR3 0x05 /* channel option (3) */ 86#define CD18xx_CCSR 0x06 /* channel control status */ 87#define CD18xx_RBR 0x33 /* receiver bit */ 88#define CD18xx_RTPR 0x18 /* receive time-out period */ 89#define CD18xx_RBPRH 0x31 /* receive bit rate period (high) */ 90#define CD18xx_RBPRL 0x32 /* receive bit rate period (low) */ 91#define CD18xx_TBPRH 0x39 /* transmit bit rate period (high) */ 92#define CD18xx_TBPRL 0x3a /* transmit bit rate period (low) */ 93#define CD18xx_SCHR1 0x09 /* special character (1) */ 94#define CD18xx_SCHR2 0x0a /* special character (2) */ 95#define CD18xx_SCHR3 0x0b /* special character (3) */ 96#define CD18xx_SCHR4 0x0c /* special character (4) */ 97#define CD18xx_MCR 0x10 /* modem change */ 98#define CD18xx_MCOR1 0x10 /* modem change option (1) */ 99#define CD18xx_MCOR2 0x11 /* modem change option (2) */ 100#define CD18xx_MSVR 0x28 /* modem signal value */ 101#define CD18xx_MSVRTS 0x29 /* modem signal value RTS */ 102#define CD18xx_MSVDTR 0x2a /* mdoem signal value DTR */ 103 104 105/* 106 * inside the registers 107 */ 108 109/* global registers */ 110 111/* global firmware revision code */ 112#define CD180_GFRCR_REV_B 0x81 /* CL-CD180B */ 113#define CD180_GFRCR_REV_C 0x82 /* CL-CD180C */ 114#define CD1864_GFRCR_REVISION_A 0x82 /* CL-CD1864A */ 115#define CD1865_GFRCR_REVISION_A 0x83 /* CL-CD1865A */ 116#define CD1865_GFRCR_REVISION_B 0x84 /* CL-CD1865B */ 117#define CD1865_GFRCR_REVISION_C 0x85 /* CL-CD1865C */ 118 119/* service request configuration register */ 120#define CD18xx_SRCR_PKGTYP 0x80 /* package type (RO) */ 121#define CD18xx_SRCR_REGACKEN 0x40 /* enable register acks */ 122#define CD18xx_SRCR_DAISYEN 0x20 /* enable daisy-chain */ 123#define CD18xx_SRCR_GLOBPRI 0x10 /* global priority */ 124#define CD18xx_SRCR_UNFAIR 0x08 /* unfair override */ 125#define CD18xx_SRCR_AUTOPRI 0x02 /* auto prioritizing */ 126#define CD18xx_SRCR_PRISEL 0x01 /* priority selection */ 127 128/* global service vector register */ 129#define CD18xx_GSVR_CLEAR 0x00 /* clear GSVR for reset */ 130#define CD18xx_GSVR_READY 0xff /* modem is ready */ 131#define CD18xx_GSVR_IDMASK 0xf8 /* unique ID per-chip */ 132#define CD18xx_GSVR_SETID(sc) ((((sc)->sc_chip_id & ~1) << 5) | \ 133 (((sc)->sc_chip_id & 1) << 3)) 134#define CD18xx_GSVR_GROUPTYPE 0x07 /* group/type */ 135#define CD18xx_GSVR_NOREQPEND 0x00 /* no request pending */ 136#define CD18xx_GSVR_MODEM 0x01 /* modem signal change */ 137#define CD18xx_GSVR_TXDATA 0x02 /* tx data */ 138#define CD18xx_GSVR_RXDATA 0x03 /* rx good data */ 139#define CD18xx_GSVR_RXEXCEPTION 0x07 /* request exception */ 140#define CD18xx_GSVR_RXINTR(x) \ 141 (((x) & CD18xx_GSVR_GROUPTYPE) == CD18xx_GSVR_RXDATA || \ 142 ((x) & CD18xx_GSVR_GROUPTYPE) == CD18xx_GSVR_RXEXCEPTION) 143#define CD18xx_GSVR_TXINTR(x) \ 144 (((x) & CD18xx_GSVR_GROUPTYPE) == CD18xx_GSVR_TXDATA) 145#define CD18xx_GSVR_MXINTR(x) \ 146 (((x) & CD18xx_GSVR_GROUPTYPE) == CD18xx_GSVR_MODEM) 147 148/* service request status register */ 149#define CD18xx_SRSR_CONTEXT 0xc0 /* service request context */ 150#define CD18xx_SRSR_PENDING 0x15 /* get status bits for each */ 151#define CD18xx_SRSR_RxPEND 0x10 /* got a Rx interrupt */ 152#define CD18xx_SRSR_TxPEND 0x04 /* got a Tx interrupt */ 153#define CD18xx_SRSR_MxPEND 0x01 /* got a modem interrupt */ 154 155/* global service channel registers */ 156#define CD18xx_GSCR_USER1 0xe0 /* 3 bits of user-defined data */ 157#define CD18xx_GSCR_CAR 0x1c /* CAR of current channel */ 158#define CD18xx_GSCR_USER2 0x03 /* 2 bits of user-defined data */ 159 160/* indexed indirect registers */ 161 162/* receive data count register */ 163#define CD18xx_RDCR_ZERO 0xf0 /* reserved, must be zero */ 164#define CD18xx_RDCR_GOODBYTES 0x0f /* number of good bytes */ 165 166/* receive character status register */ 167#define CD18xx_RCSR_TIMEOUT 0x80 /* timeout has occurred on channel */ 168#define CD18xx_RCSR_SCD 0x70 /* special character detect */ 169#define CD18xx_RCSR_BREAK 0x08 /* line break detected */ 170#define CD18xx_RCSR_PARITYERR 0x04 /* parity error detected */ 171#define CD18xx_RCSR_FRAMERR 0x02 /* framing error detected */ 172#define CD18xx_RCSR_OVERRUNERR 0x01 /* overrun error detected */ 173 174/* transmit data register */ 175#define CD18xx_TDR_ETC_BYTE 0x00 /* first byte of break message */ 176#define CD18xx_TDR_BREAK_BYTE 0x81 /* first byte of break message */ 177#define CD18xx_TDR_NOBREAK_BYTE 0x83 /* first byte of clean break message */ 178 179/* channel registers */ 180 181/* service request enable register */ 182#define CD18xx_SRER_DSR 0x80 /* DSR service request */ 183#define CD18xx_SRER_CD 0x40 /* CD service request */ 184#define CD18xx_SRER_CTS 0x20 /* CTS service request */ 185#define CD18xx_SRER_Rx 0x10 /* Rx data service request */ 186#define CD18xx_SRER_RxSC 0x08 /* Rx special char service request */ 187#define CD18xx_SRER_Tx 0x04 /* Tx ready service request */ 188#define CD18xx_SRER_TxEMPTY 0x02 /* Tx empty service request */ 189#define CD18xx_SRER_NNDT 0x01 /* no new data timeout service request */ 190 191/* channel command register */ 192#define CD18xx_CCR_RESET 0x80 /* reset channel command */ 193#define CD18xx_CCR_CORCHG 0x40 /* COR change command */ 194#define CD18xx_CCR_SENDSC 0x20 /* send special character command */ 195#define CD18xx_CCR_CHANCTL 0x10 /* channel control command */ 196 197/* bits inside CCR's least significant half-byte */ 198#define CD18xx_CCR_RESET_HARD 0x01 /* full, hard reset */ 199#define CD18xx_CCR_RESET_CHAN 0x00 /* reset only the current channel */ 200#define CD18xx_CCR_CORCHG_COR3 0x08 /* change COR3 command */ 201#define CD18xx_CCR_CORCHG_COR2 0x04 /* change COR2 command */ 202#define CD18xx_CCR_CORCHG_COR1 0x02 /* change COR1 command */ 203#define CD18xx_CCR_SENDSC_SEND1 0x01 /* send SC 1, or 1&3 */ 204#define CD18xx_CCR_SENDSC_SEND2 0x02 /* send SC 2, or 2&4 */ 205#define CD18xx_CCR_SENDSC_SEND3 0x03 /* send SC 3 */ 206#define CD18xx_CCR_SENDSC_SEND4 0x04 /* send SC 4 */ 207/* note that these are slower than enabling/disabling SRER */ 208#define CD18xx_CCR_CHANCTL_TxEN 0x08 /* transmitter enable */ 209#define CD18xx_CCR_CHANCTL_TxDI 0x04 /* transmitter disable */ 210#define CD18xx_CCR_CHANCTL_RxEN 0x02 /* receiver enable */ 211#define CD18xx_CCR_CHANCTL_RxDI 0x01 /* receiver disable */ 212 213/* channel option register 1 */ 214#define CD18xx_COR1_PARITY 0x80 /* parity */ 215#define CD18xx_COR1_PARITY_ODD 0x80 /* odd parity */ 216#define CD18xx_COR1_PARITY_EVEN 0x00 /* even parity */ 217#define CD18xx_COR1_PARITY_MODE 0x60 /* parity mode */ 218#define CD18xx_COR1_PARITY_NONE 0x00 /* no parity */ 219#define CD18xx_COR1_PARITY_FORCE 0x20 /* force parity */ 220#define CD18xx_COR1_PARITY_NORMAL 0x40 /* normal parity */ 221#define CD18xx_COR1_IGNORE 0x10 /* parity ignore mode */ 222#define CD18xx_COR1_STOPBITLEN 0x0c /* stop bit length */ 223#define CD18xx_COR1_STOPBIT_1 0x00 /* 1 stop bit */ 224#define CD18xx_COR1_STOPBIT_1_5 0x04 /* 1.5 stop bits */ 225#define CD18xx_COR1_STOPBIT_2 0x08 /* 2 stop bits */ 226#define CD18xx_COR1_STOPBIT_2_5 0x0c /* 2.5 stop bits */ 227#define CD18xx_COR1_CHARLEN 0x03 /* character length */ 228#define CD18xx_COR1_CS5 0x00 /* 5 bit chars */ 229#define CD18xx_COR1_CS6 0x01 /* 7 bit chars */ 230#define CD18xx_COR1_CS7 0x02 /* 7 bit chars */ 231#define CD18xx_COR1_CS8 0x03 /* 8 bit chars */ 232 233/* channel option register 2 */ 234#define CD18xx_COR2_IXM 0x80 /* implied XON mode */ 235#define CD18xx_COR2_TxIBE 0x40 /* Tx inband flow control auto enable */ 236#define CD18xx_COR2_ETC 0x20 /* embedded Tx command enable */ 237#define CD18xx_COR2_LLM 0x10 /* local loopback mode */ 238#define CD18xx_COR2_RLM 0x08 /* remote loopback mode */ 239#define CD18xx_COR2_RTSAOE 0x04 /* RTS auto output enable */ 240#define CD18xx_COR2_CTSAE 0x02 /* CTS auto enable */ 241#define CD18xx_COR2_DSRAE 0x01 /* DSR auto enable */ 242 243/* channel option register 3 */ 244#define CD18xx_COR3_XONCH 0x80 /* XON character definition */ 245#define CD18xx_COR3_XOFFCH 0x40 /* XOFF character definition */ 246#define CD18xx_COR3_FCTM 0x20 /* flow control transparency mode */ 247#define CD18xx_COR3_SCDE 0x10 /* special character detection enable */ 248#define CD18xx_COR3_FIFOTHRESH 0x08 /* Rx FIFO threshold */ 249 250/* channel control status register */ 251#define CD18xx_CCSR_RxEN 0x80 /* Rx enable */ 252#define CD18xx_CCSR_RxFLOFF 0x40 /* Rx flow control off enable */ 253#define CD18xx_CCSR_RxFLON 0x20 /* Rx flow control on enable */ 254#define CD18xx_CCSR_TxEN 0x08 /* Tx enable */ 255#define CD18xx_CCSR_TxFLOFF 0x04 /* Tx flow control off enable */ 256#define CD18xx_CCSR_TxFLON 0x02 /* Tx flow control on enable */ 257 258/* receiver bit register */ 259#define CD18xx_RBR_RxD 0x40 /* last RxD input */ 260#define CD18xx_RBR_STARTHUNT 0x20 /* hunting for a start bit */ 261 262/* bit rate period resisters */ 263#define CD18xx_xBRPR_TPC 0x10 /* ticks per character */ 264 265/* mode change register */ 266#define CD18xx_MCR_DSR 0x80 /* DSR changed */ 267#define CD18xx_MCR_CD 0x40 /* CD changed */ 268#define CD18xx_MCR_CTS 0x20 /* CST changed */ 269 270/* modem change option register 1 */ 271#define CD18xx_MCOR1_DSR 0x80 /* high-to-low on DSR */ 272#define CD18xx_MCOR1_CD 0x40 /* high-to-low on CD */ 273#define CD18xx_MCOR1_CTS 0x20 /* high-to-low on CTS */ 274#define CD18xx_MCOR1_DTR 0x08 /* high-to-low on DSR mode */ 275 276/* modem change option register 2 */ 277#define CD18xx_MCOR2_DSR 0x80 /* low-to-high on DSR */ 278#define CD18xx_MCOR2_CD 0x40 /* low-to-high on CD */ 279#define CD18xx_MCOR2_CTS 0x20 /* low-to-high on CST */ 280 281/* modem signal value register */ 282#define CD18xx_MSVR_DSR 0x80 /* current DSR state */ 283#define CD18xx_MSVR_CD 0x40 /* current CD state */ 284#define CD18xx_MSVR_CTS 0x20 /* current CTS state */ 285#define CD18xx_MSVR_DTR 0x02 /* current DTR state */ 286#define CD18xx_MSVR_RTS 0x01 /* current RTS state */ 287#define CD18xx_MSVR_RESET (CD18xx_MSVR_DSR|CD18xx_MSVR_CD| \ 288 CD18xx_MSVR_CTS|CD18xx_MSVR_DTR| \ 289 CD18xx_MSVR_RTS) 290 291/* modem signal value request-to-send register */ 292#define CD18xx_MSVRTS_RTS 0x01 /* change RTS and not DTR */ 293 294/* modem signal value data-terminal-ready register */ 295#define CD18xx_MSVDTR_DTR 0x01 /* change DTR and not RTS */ 296 297