1# Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2# 2000, 2001, 2002, 2003, 2005, 2006, 2007, 2008, 2009, 2010, 2011 3# Free Software Foundation, Inc. 4 5# This program is free software; you can redistribute it and/or modify 6# it under the terms of the GNU General Public License as published by 7# the Free Software Foundation; either version 3 of the License, or 8# (at your option) any later version. 9# 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY; without even the implied warranty of 12# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13# GNU General Public License for more details. 14# 15# You should have received a copy of the GNU General Public License 16# along with this program. If not, see <http://www.gnu.org/licenses/>. 17 18# Start with a fresh gdb 19 20gdb_exit 21gdb_start 22 23set prev_timeout $timeout 24set timeout 60 25 26# 27# test default actions of gdb commands 28# 29 30#load_lib gdb.exp 31 32gdb_test "add-symbol-file" "add-symbol-file takes a file name and an address" "add-symbol-file" 33 34# test append 35gdb_test "append" "\"append\" must be followed by a subcommand\.\[\r\n\]+List of append subcommands:.*" 36gdb_test "append binary" "\"append binary\" must be followed by a subcommand\.\[\r\n\]+List of append binary subcommands:.*" 37gdb_test "append memory" "Missing filename\." 38gdb_test "append value" "Missing filename\." 39gdb_test "append binary memory" "Missing filename\." 40gdb_test "append binary value" "Missing filename\." 41 42setup_xfail "mips-idt-*" 43gdb_test_multiple "attach" "attach" { 44 -re "Argument required .(process-id|program) to attach.*$gdb_prompt $"\ 45 { pass "attach" } 46 -re "You can't do that when your target is `None'.*$gdb_prompt $"\ 47 { pass "attach" } 48 -re "You can't do that without a process to debug.*$gdb_prompt $"\ 49 { pass "attach" } 50 -re "Don't know how to attach. Try \"help target\"..*$gdb_prompt $"\ 51 { pass "attach" } 52 -re "Kill it. .y or n." { 53 send_gdb "y\n" 54 exp_continue 55 } 56} 57 58if ![target_info exists use_gdb_stub] { 59 gdb_test "break" "No default breakpoint address now." "break" 60 foreach i "b br bre brea" { 61 gdb_test $i "No default breakpoint address now." "break \"$i\" abbreviation" 62 } 63 64 65 setup_xfail "mips-idt-*" 66 gdb_test "backtrace" "No stack." 67 68 # ba and bac are no longer unique command prefixes. So these tests 69 # elict an error from GDB. 70 # GDB needs to be fixed to map unique alias here for ba bac. 71 # 72 foreach i "bt ba bac" { 73 setup_xfail "mips-idt-*" 74 gdb_test $i "No stack." "backtrace \"$i\" abbreviation" 75 } 76} else { 77 warning "Skipping backtrace and break tests because of GDB stub." 78} 79 80# This works on the MIPS IDT board, but confuses future tests. 81if ![istarget "mips-idt-*"] then { 82 gdb_test "continue" "The program is not being run." "continue" 83 gdb_test "c" "The program is not being run." "continue \"c\" abbreviation" 84} 85 86#test call 87gdb_test "call" "The history is empty..*" "call" 88 89 90#test catch 91gdb_test "catch" "Catch requires an event name..*" "catch" 92 93#test cd 94gdb_test "cd" "Argument required .new working directory.*" "cd" 95 96#test clear 97gdb_test "clear" "No source file specified..*" "clear" 98 99#test commands 100gdb_test "commands" "Argument required .one or more breakpoint numbers...*" "commands" 101 102#test condition 103gdb_test "condition" "Argument required .breakpoint number.*" "condition" 104 105#test core-file 106gdb_test "core-file" "No core file now.|GDB can't read core files on this machine." "core-file" 107#test delete "d" abbreviation 108gdb_test_no_output "d" "delete \"d\" abbreviation" 109#test delete 110gdb_test_no_output "delete" "delete" 111#test define 112gdb_test "define" "Argument required \[(\]name of command to define\[)\]." "define" 113#test delete breakpoints 114gdb_test_no_output "delete breakpoints" "delete breakpoints" 115#test delete display 116# FIXME -- need to dump full output to detailed log 117 118gdb_test "delete display" \ 119 "" \ 120 "delete display prompt" \ 121 "Delete all auto-display expressions.*y or n. $" \ 122 "y" 123 124 125#test detach 126gdb_test "detach" ".*" "detach" 127 128if [istarget "h8300-*-hms"] then { 129 gdb_exit 130 gdb_start 131} 132 133#test directory 134# FIXME -- need to dump full output to detailed log 135 136gdb_test "directory" \ 137 "Source directories searched: .cdir\[:;\].cwd.*" \ 138 "directory prompt" \ 139 "Reinitialize source path to empty.*y or n. $" \ 140 "y" 141 142#test disable "dis" abbreviation 143gdb_test_no_output "dis" "disable \"dis\" abbreviation" 144#test disable "disa" abbreviation 145gdb_test_no_output "disa" "disable \"disa\" abbreviation" 146#test disable 147gdb_test_no_output "disable" "disable" 148#test disable breakpoints 149gdb_test_no_output "disable breakpoints" "disable breakpoints" 150#test disable display 151gdb_test_no_output "disable display" "disable display" 152#test disassemble 153gdb_test "disassemble" "No frame selected." "disassemble" 154#test display 155gdb_test_no_output "display" "display" 156#test do 157gdb_test "do" "No stack." "do" 158#test document 159gdb_test "document" "Argument required .name of command to define.*" "document" 160#test down 161gdb_test "down" "No stack.*" "down" 162#test down-silently 163gdb_test "down-silently" "No stack." "down-silently" 164# test dump 165gdb_test "dump" "\"dump\" must be followed by a subcommand\.\[\r\n\]+List of dump subcommands:.*" 166gdb_test "dump binary" "\"dump binary\" must be followed by a subcommand\.\[\r\n\]+List of dump binary subcommands:.*" 167gdb_test "dump ihex" "\"dump ihex\" must be followed by a subcommand\.\[\r\n\]+List of dump ihex subcommands:.*" 168gdb_test "dump memory" "Missing filename\." 169gdb_test "dump srec" "\"dump srec\" must be followed by a subcommand\.\[\r\n\]+List of dump srec subcommands:.*" 170gdb_test "dump tekhex" "\"dump tekhex\" must be followed by a subcommand\.\[\r\n\]+List of dump tekhex subcommands:.*" 171gdb_test "dump value" "Missing filename\." 172gdb_test "dump binary memory" "Missing filename\." 173gdb_test "dump binary value" "Missing filename\." 174gdb_test "dump ihex memory" "Missing filename\." 175gdb_test "dump ihex value" "Missing filename\." 176gdb_test "dump srec memory" "Missing filename\." 177gdb_test "dump srec value" "Missing filename\." 178gdb_test "dump tekhex memory" "Missing filename\." 179gdb_test "dump tekhex value" "Missing filename\." 180#test echo 181gdb_test_no_output "echo" "echo" 182#test enable breakpoints delete 183gdb_test "enable breakpoints delete" "Argument required .one or more breakpoint numbers.*" "enable breakpoints delete" 184#test enable breakpoints once 185gdb_test "enable breakpoints once" "Argument required .one or more breakpoint numbers.*" "enable breakpoints once" 186#test enable breakpoints 187gdb_test_no_output "enable breakpoints" "enable breakpoints" 188#test enable delete 189gdb_test "enable delete" "Argument required .one or more breakpoint numbers.*" "enable delete" 190#test enable display 191gdb_test_no_output "enable display" "enable display" 192#test enable once 193gdb_test "enable once" "Argument required .one or more breakpoint numbers.*" "enable once" 194#test enable 195gdb_test_no_output "enable" "enable" 196#test exec-file 197send_gdb "exec-file\n" 198gdb_expect { 199 -re "No executable file now..*$gdb_prompt $" { 200 pass "exec-file" 201 } 202 -re "exec-file.*A program is being debugged already. Kill it. .y or n.*$" { 203 send_gdb "n\n" 204 if $verbose>1 then { 205 send_user "\tDidn't kill program being debugged\n" 206 } 207 gdb_expect -re "$gdb_prompt $" { } 208 pass "exec-file" 209 } 210 -re "$gdb_prompt $" { fail "exec-file" } 211 timeout { fail "(timeout) exec-file" } 212} 213 214#test frame "f" abbreviation 215gdb_test "f" "No stack." "frame \"f\" abbreviation" 216#test frame 217gdb_test "frame" "No stack." "frame" 218#test fg 219gdb_test "fg" "The program is not being run." "fg" 220# FIXME: fg kills the udi connection 221#test file 222send_gdb "file\n" 223gdb_expect { 224 -re "No executable file now..*$gdb_prompt $"\ 225 { pass "file" } 226 -re ".*A program is being debugged already. Kill it. .y or n.*$" { 227 send_gdb "n\n" 228 if $verbose>1 then { 229 send_user "\t\tDidn't kill program being debugged\n" 230 } 231 gdb_expect -re "$gdb_prompt $" { } 232 pass "file" 233 } 234 -re ".*$gdb_prompt $" { fail "file" } 235 timeout { fail "(timeout) file" } 236} 237 238#test finish 239gdb_test "finish" "The program is not being run." "finish" 240#test forward-search 241# The message here comes from the regexp library, not gdb, and so can 242# vary on different systems. 243gdb_test "forward-search" "No previous regular expression.*|There is no previous regular expression.*" "forward-search" 244#test gcore 245 246gdb_test_multiple "gcore" "gcore" { 247 -re "You can\'t do that without a process to debug.*$gdb_prompt $" { 248 pass "gcore" 249 } 250 -re "Undefined command: .*$gdb_prompt $" { 251 pass "gcore" 252 } 253} 254 255gdb_test_multiple "generate-core-file" "generate-core-file" { 256 -re "You can\'t do that without a process to debug.*$gdb_prompt $" { 257 pass "generate-core-file" 258 } 259 -re "Undefined command: .*$gdb_prompt $" { 260 pass "generate-core-file" 261 } 262} 263 264#test help "h" abbreviation 265gdb_test "h" "List of classes of commands:(\[^\r\n\]*\[\r\n\])+aliases -- Aliases of other commands(\[^\r\n\]*\[\r\n\])+breakpoints -- Making program stop at certain points(\[^\r\n\]*\[\r\n\])+data -- Examining data(\[^\r\n\]*\[\r\n\])+files -- Specifying and examining files(\[^\r\n\]*\[\r\n\])+obscure -- Obscure features(\[^\r\n\]*\[\r\n\])+running -- Running the program(\[^\r\n\]*\[\r\n\])+stack -- Examining the stack(\[^\r\n\]*\[\r\n\])+status -- Status inquiries(\[^\r\n\]*\[\r\n\])+support -- Support facilities(\[^\r\n\]*\[\r\n\])+user-defined -- User-defined commands(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by a class name for a list of commands in that class.(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by command name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "help \"h\" abbreviation" 266#test help 267gdb_test "help" "List of classes of commands:(\[^\r\n\]*\[\r\n\])+aliases -- Aliases of other commands(\[^\r\n\]*\[\r\n\])+breakpoints -- Making program stop at certain points(\[^\r\n\]*\[\r\n\])+data -- Examining data(\[^\r\n\]*\[\r\n\])+files -- Specifying and examining files(\[^\r\n\]*\[\r\n\])+obscure -- Obscure features(\[^\r\n\]*\[\r\n\])+running -- Running the program(\[^\r\n\]*\[\r\n\])+stack -- Examining the stack(\[^\r\n\]*\[\r\n\])+status -- Status inquiries(\[^\r\n\]*\[\r\n\])+support -- Support facilities(\[^\r\n\]*\[\r\n\])+user-defined -- User-defined commands(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by a class name for a list of commands in that class.(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by command name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "help" 268#test handle 269gdb_test "handle" "Argument required .signal to handle.*" "handle" 270#test info "i" abbreviation 271gdb_test "i" "\"info\" must be followed by the name of an info command.(\[^\r\n\]*\[\r\n\])+List of info subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help info\" followed by info subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "info \"i\" abbreviation" 272#test info 273gdb_test "info" "\"info\" must be followed by the name of an info command.(\[^\r\n\]*\[\r\n\])+List of info subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help info\" followed by info subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "info" 274#test ignore 275gdb_test "ignore" "Argument required .a breakpoint number.*" "ignore" 276#test info address 277gdb_test "info address" "Argument required." "info address" 278#test info all-registers 279gdb_test "info all-registers" "The program has no registers now." "info all-registers" 280#test info args 281gdb_test "info args" "No frame selected." "info args" 282#test info bogus-gdb-command 283gdb_test "info bogus-gdb-command" "Undefined info command: \"bogus-gdb-command\". Try \"help info\".*" "info bogus-gdb-command" 284#test info breakpoints 285gdb_test "info breakpoints" "No breakpoints or watchpoints." "info breakpoints" 286#test info catch 287gdb_test "info catch" "No frame selected." "info catch" 288#test info copying 289# FIXME -- doesn't work worth a shit 290#send_gdb "info copying" 291# -re "GNU GENERAL PUBLIC LICENSE.*#of preserving the free status of all derivatives of our free software and.*#of promoting the sharing and reuse of software generally."# 292gdb_test "info copying" 293# } 294# 295# 296#test info display 297gdb_test "info display" "There are no auto-display expressions now." "info display" 298#test info frame "f" abbreviation 299gdb_test "info f" "No stack.*|No selected frame.*" "info frame \"f\" abbreviation" 300#test info frame 301gdb_test "info frame" "No stack.|No selected frame." "info frame" 302#test info files 303gdb_test_no_output "info files" "info files" 304#test info float 305gdb_test "info float" "The program has no registers now." "info float" 306#test info functions 307gdb_test "info functions" "All defined functions:" "info functions" 308#test info locals 309gdb_test "info locals" "No frame selected." "info locals" 310#test info program 311gdb_test "info program" "The program being debugged is not being run." "info program" 312#test info registers 313gdb_test "info registers" "The program has no registers now." "info registers" 314#test info stack "s" abbreviation 315gdb_test "info s" "No stack." "info stack \"s\" abbreviation" 316#test info stack 317gdb_test "info stack" "No stack." "info stack" 318#test info set 319# Test improved to check three parts: 320# 1) confirm 321# 2) prompt 322# 3) write 323# And only succeed if all three are matched. 324# This should fix an old problem on native solaris 2.8, 325# where this test fails due to this line: 326# prompt: Gdb's prompt is "(gdb) ".^M 327set set_confirm_seen 0 328set set_prompt_seen 0 329gdb_test_multiple "info set" "info set" { 330 -re "confirm: Whether to confirm potentially dangerous operations is o\[a-z\]*.(\[^\r\n\]*\[\r\n\])+history filename: The filename in which to record the command history is (\[^\r\n\]*\[\r\n\])+listsize: Number of source lines gdb will list by default is 10" { 331 verbose "Confirm dislayed" 332 set set_confirm_seen 1 333 exp_continue 334 } 335 -re "Gdb's prompt is \"$gdb_prompt \"" { 336 verbose "GDB prompt displayed" 337 set set_prompt_seen 1 338 exp_continue 339 } 340 -re "Writing into executable.*$gdb_prompt $" { 341 verbose "write displayed" 342 if { $set_prompt_seen && $set_confirm_seen } { 343 pass "info set" 344 } else { 345 verbose "prompt $set_prompt_seen confirm $set_confirm_seen" 346 fail "info set (incomplete output)" 347 } 348 } 349} 350gdb_test "info symbol" "Argument required .address.." 351#test info source 352gdb_test "info source" "No current source file..*" "info source" 353#test info sources 354gdb_test "info sources" "No symbol table is loaded. Use the \"file\" command.*" "info sources" 355#test info target 356gdb_test_no_output "info target" "info target" 357#test info terminal 358gdb_test "info terminal" "No saved terminal information." "info terminal" 359# test info threads 360gdb_test "info threads" "No threads." "info threads" 361#test info types 362gdb_test "info types" "All defined types:" "info types" 363#test info variables 364gdb_test "info variables" "All defined variables:" "info variables" 365#test info vector 366gdb_test "info vector" "The program has no registers now." "info vector" 367#test info warranty 368gdb_test "info warranty" "15. *Disclaimer of Warranty.*" "info warranty" 369#test info watchpoints 370gdb_test "info watchpoints" "No watchpoints." "info watchpoints" 371#test inspect 372gdb_test "inspect" "The history is empty." "inspect" 373#test jump 374gdb_test "jump" "The program is not being run." "jump" 375#test kill 376gdb_test "kill" "The program is not being run." "kill" 377#test list "l" abbreviation 378gdb_test "l" "No symbol table is loaded. Use the \"file\" command.*" "list \"l\" abbreviation" 379#test list 380gdb_test "list" "No symbol table is loaded. Use the \"file\" command.*" "list" 381#test load 382# The ``takes a file name'' case is for vxgdb. 383# The ``Use the "file" command'' case is for newer GDB versions which try 384# to deduce the filename from the exec file. 385gdb_test "load" "You can't do that when your target is `None'.*|The load command takes a file name.*|Must specify at least a file name with the load command.*|.*Use the .file. or .exec-file. command.*" "load" 386#test next "n" abbreviation 387gdb_test "n" "The program is not being run." "next \"n\" abbreviation" 388#test next 389gdb_test "next" "The program is not being run." "next" 390#test nexti "ni" abbreviation 391gdb_test "ni" "The program is not being run." "nexti \"ni\" abbreviation" 392#test nexti 393gdb_test "nexti" "The program is not being run." "nexti" 394#test output 395gdb_test "output" "Argument required .expression to compute.*" "output" 396 397#test overlay 398gdb_test "overlay" "\"overlay\" must be followed by the name of .*" 399#test a non-existant overlay subcommand 400gdb_test "overlay on" "Undefined overlay command.* Try \"help overlay\"." 401gdb_test_no_output "overlay manual" "overlay manual #1" 402gdb_test_no_output "overlay auto" 403gdb_test_no_output "overlay off" 404gdb_test "overlay list" "No sections are mapped." 405gdb_test "overlay map" "Overlay debugging not enabled.*" "overlay map #1" 406gdb_test "overlay unmap" "Overlay debugging not enabled.*" "overlay unmap #1" 407gdb_test_no_output "overlay manual" "overlay manual #2" 408gdb_test "overlay map" "Argument required: name of an overlay section." "overlay map #2" 409gdb_test "overlay unmap" "Argument required: name of an overlay section." "overlay unmap #2" 410 411#test print "p" abbreviation 412gdb_test "p" "The history is empty." "print \"p\" abbreviation" 413#test print 414gdb_test "print" "The history is empty." "print" 415#test printf 416gdb_test "printf" "Argument required .format-control string and values to print.*" "printf" 417#test ptype 418gdb_test "ptype" "The history is empty." "ptype" 419#test pwd 420gdb_test "pwd" "Working directory .*" "pwd" 421 422#test run "r" abbreviation 423if [istarget "*-*-vxworks*"] then { 424 gdb_test "set args" ".*" "" 425 426 gdb_test "r" "Starting program: .* 427You must specify a function name to run, and arguments if any"\ 428 "run \"r\" abbreviation" 429 gdb_test "set args main" ".*" "" 430 431} else { 432 gdb_test_multiple "r" "run \"r\" abbreviation" { 433 -re "Starting program: .*You can't do that when your target is `None'.*$gdb_prompt $"\ 434 { pass "run \"r\" abbreviation" } 435 -re "Starting program: .*No executable file specified.*Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\ 436 { pass "run \"r\" abbreviation" } 437 -re "Starting program: .*No executable specified, use .target exec.\\..*$gdb_prompt $"\ 438 { pass "run \"r\" abbreviation" } 439 -re "Starting program: .*No image loaded into target.*$gdb_prompt $"\ 440 { pass "run \"r\" abbreviation" } 441 -re "Starting program: .*No program loaded.*$gdb_prompt $"\ 442 { pass "run \"r\" abbreviation" } 443 -re "Don't know how to run. Try \"help target\"..*$gdb_prompt $"\ 444 { pass "run \"r\" abbreviation" } 445 } 446} 447 448#test run 449if [istarget "*-*-vxworks*"] then { 450 gdb_test "set args" ".*" "" 451 452 gdb_test "run" "Starting program: .* 453You must specify a function name to run, and arguments if any" 454 gdb_test "set args main" ".*" "" 455 456} else { 457 gdb_test_multiple "run" "run" { 458 -re "Starting program:.*You can't do that when your target is `None'.*$gdb_prompt $"\ 459 { pass "run" } 460 -re "Starting program: .*No executable file specified.*Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\ 461 { pass "run" } 462 -re "Starting program: .*No executable specified, use .target exec.\\..*$gdb_prompt $"\ 463 { pass "run" } 464 -re "Starting program: .*No image loaded into target.*$gdb_prompt $"\ 465 { pass "run" } 466 -re "Starting program: .*No program loaded.*$gdb_prompt $"\ 467 { pass "run" } 468 -re "Don't know how to run. Try \"help target\"..*$gdb_prompt $"\ 469 { pass "run" } 470 } 471} 472 473#test rbreak 474gdb_test "rbreak" "rbreak" 475 476# test restore 477gdb_test "restore" "You can't do that without a process to debug\." 478 479#test return 480# The middle case accomodated the obsolete a29k, where doing the "ni" 481# above causes an initial stack to be created. 482gdb_test "return" "No selected frame..*" "return" "Make .* return now.*y or n. $" "y" 483 484 485#test reverse-search 486gdb_test "reverse-search" "No previous regular expression.*|There is no previous regular expression.*" "reverse-search" 487#test step "s" abbreviation 488gdb_test "s" "The program is not being run." "step \"s\" abbreviation #1" 489#test step 490gdb_test "step" "The program is not being run." "step #1" 491#test search 492gdb_test "search" "No previous regular expression.*|There is no previous regular expression.*" "search" 493#test section 494gdb_test "section" "Must specify section name and its virtual address.*" "section" 495#test set annotate 496gdb_test "set annotate" "Argument required .integer to set it to.*" "set annotate" 497#test set args 498gdb_test_no_output "set args" "set args" 499#test set check "c" abbreviation 500gdb_test "set c" "\"set check\" must be followed by the name of a check subcommand.(\[^\r\n\]*\[\r\n\])+List of set check subcommands:(\[^\r\n\]*\[\r\n\])+set check range -- Set range checking(\[^\r\n\]*\[\r\n\])+set check type -- Set type checking(\[^\r\n\]*\[\r\n\])+Type \"help set check\" followed by set check subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set check \"c\" abbreviation" 501#test set check "ch" abbreviation 502gdb_test "set ch" "\"set check\" must be followed by the name of a check subcommand.(\[^\r\n\]*\[\r\n\])+List of set check subcommands:(\[^\r\n\]*\[\r\n\])+set check range -- Set range checking(\[^\r\n\]*\[\r\n\])+set check type -- Set type checking(\[^\r\n\]*\[\r\n\])+Type \"help set check\" followed by set check subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set check \"ch\" abbreviation" 503#test set check 504gdb_test "set check" "\"set check\" must be followed by the name of a check subcommand.(\[^\r\n\]*\[\r\n\])+List of set check subcommands:(\[^\r\n\]*\[\r\n\])+set check range -- Set range checking(\[^\r\n\]*\[\r\n\])+set check type -- Set type checking(\[^\r\n\]*\[\r\n\])+Type \"help set check\" followed by set check subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set check" 505#test set check range 506gdb_test "set check range" ".*" "set check range" 507#test set check type 508gdb_test "set check type" ".*" "set check type" 509#test set complaints 510gdb_test "set complaints" "Argument required .integer to set it to.*" "set complaints" 511#test set confirm 512gdb_test_no_output "set confirm" "set confirm" 513# Don't test set editing. What if we're talking to a gdb that 514# won't do editing correctly while we're talking to it? 515# gdb_test "set editing" "" "set editing" 516 517#test set environment 518gdb_test "set environment" "Argument required .environment variable and value.*" "set environment" 519#test set height 520gdb_test "set height" "Argument required .integer to set it to.*" "set height" 521#test set history expansion 522gdb_test_no_output "set history expansion" "set history expansion" 523#test set history filename 524gdb_test "set history filename" "Argument required .filename to set it to.*" "set history filename" 525#test set history save 526gdb_test_no_output "set history save" "set history save" 527#test set history size 528gdb_test "set history size" "Argument required .integer to set it to.*" "set history size" 529#test set history 530gdb_test "set history" "\"set history\" must be followed by the name of a history subcommand.(\[^\r\n\]*\[\r\n\])+List of set history subcommands:(\[^\r\n\]*\[\r\n\])+set history expansion -- Set history expansion on command input(\[^\r\n\]*\[\r\n\])+set history filename -- Set the filename in which to record the command history(\[^\r\n\]*\[\r\n\])+set history save -- Set saving of the history record on exit(\[^\r\n\]*\[\r\n\])+set history size -- Set the size of the command history(\[^\r\n\]*\[\r\n\])+Type \"help set history\" followed by set history subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set history" 531#test set language 532gdb_test "set language" "Requires an argument. Valid arguments are auto, local, unknown, ada, c, c.., asm, minimal, d, fortran, objective-c, java, modula-2, opencl, pascal." "set language" 533#test set listsize 534gdb_test "set listsize" "Argument required .integer to set it to.*" "set listsize" 535#test set print "p" abbreviation 536gdb_test "set p" "\"set print\" must be followed by the name of a print subcommand.(\[^\r\n\]*\[\r\n\])+List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print \"p\" abbreviation" 537#test set print "pr" abbreviation 538gdb_test "set pr" "\"set print\" must be followed by the name of a print subcommand.(\[^\r\n\]*\[\r\n\])+List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print \"pr\" abbreviation" 539#test set print 540gdb_test "set print" "\"set print\" must be followed by the name of a print subcommand.(\[^\r\n\]*\[\r\n\])+List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print" 541#test set print address 542gdb_test_no_output "set print address" "set print address" 543#test set print array 544gdb_test_no_output "set print array" "set print array" 545#test set print asm-demangle 546gdb_test_no_output "set print asm-demangle" "set print asm-demangle" 547#test set print demangle 548gdb_test_no_output "set print demangle" "set print demangle" 549#test set print elements 550gdb_test "set print elements" "Argument required .integer to set it to.*" "set print elements" 551#test set print object 552gdb_test_no_output "set print object" "set print object" 553#test set print pretty 554gdb_test_no_output "set print pretty" "set print pretty" 555#test set print sevenbit-strings 556gdb_test_no_output "set print sevenbit-strings" "set print sevenbit-strings" 557#test set print union 558gdb_test_no_output "set print union" "set print union" 559#test set print vtbl 560gdb_test_no_output "set print vtbl" "set print vtbl" 561# FIXME -- need a test for "set prompt" 562#test set radix 563gdb_test "set radix" "Input and output radices now set to decimal 10, hex a, octal 12.*" "set radix" 564#test set symbol-reloading 565gdb_test_no_output "set symbol-reloading" "set symbol-reloading" 566#test set variable 567gdb_test "set variable" "Argument required .expression to compute.*" "set variable" 568#test set verbose 569gdb_test_no_output "set verbose" "set verbose" 570#test set width 571gdb_test "set width" "Argument required .integer to set it to.*" "set width" 572#test set write 573# This is only supported on targets which use exec.o. 574gdb_test_no_output "set write" "set write" 575#test set 576gdb_test "set" "Argument required .expression to compute.*" "set" 577#test shell echo Hi dad! 578gdb_test "shell echo Hi dad!" "Hi dad!" "shell echo Hi dad!" 579#test show annotate 580gdb_test "show annotate" "Annotation_level is 0." "show annotate" 581#test show args 582gdb_test "show args" "Argument list to give program being debugged when it is started is \"\"." "show args" 583#test show check "c" abbreviation 584gdb_test "show c" "range: *Range checking is \"auto; currently off\".(\[^\r\n\]*\[\r\n\])+type: *Type checking is \"auto; currently off\".*" "show check \"c\" abbreviation" 585#test show check "ch" abbreviation 586gdb_test "show ch" "range: *Range checking is \"auto; currently off\".(\[^\r\n\]*\[\r\n\])+type: *Type checking is \"auto; currently off\"." "show check \"ch\" abbreviation" 587#test show check 588gdb_test "show check" "range: *Range checking is \"auto; currently off\".(\[^\r\n\]*\[\r\n\])+type: *Type checking is \"auto; currently off\"." "show check" 589#test show check range 590gdb_test "show check range" "Range checking is \"auto; currently off\"." "show check range" 591#test show check type 592gdb_test "show check type" "Type checking is \"auto; currently off\"." "show check type" 593#test show commands 594gdb_test "show commands" ".*" "show commands" 595#test show complaints 596gdb_test "show complaints" "Max number of complaints about incorrect symbols is 0." "show complaints" 597#test show confirm 598gdb_test "show confirm" "Whether to confirm potentially dangerous operations is o\[a-z\]*." "show confirm" 599 600#test show convenience 601# This is tricker as there are multiple internal convenience vars and we 602# can't assume any particular order. 603gdb_test_list_exact "show convenience" "show convenience" \ 604 {[^\r\n]+[\r\n]+} \ 605 {[^\r\n]+} \ 606 { \ 607 {$_sdata = void} \ 608 {$_siginfo = void} \ 609 {$_thread = 0} \ 610 } 611 612#test show directories 613gdb_test "show directories" "Source directories searched: .cdir\[:;\].cwd" "show directories" 614#test show editing 615gdb_test "show editing" "Editing of command lines as they are typed is o\[a-z\]*." "show editing" 616#test show height 617gdb_test "show height" "Number of lines gdb thinks are in a page is.*" "show height" 618#test show history expansion 619gdb_test "show history expansion" "History expansion on command input is o\[a-z\]*.*" "show history expansion" 620#test show history filename 621gdb_test "show history filename" "The filename in which to record the command history is.*.gdb_history.*" "show history filename" 622#test show history save 623gdb_test "show history save" "Saving of the history record on exit is on." "show history save" 624#test show history size 625gdb_test "show history size" "The size of the command history is.*" "show history size" 626#test show history 627gdb_test "show history" "expansion: *History expansion on command input is o(\[^\r\n\]*\[\r\n\])+filename: *The filename in which to record the command history is.*.gdb_history(\[^\r\n\]*\[\r\n\])+save: *Saving of the history record on exit is o(\[^\r\n\]*\[\r\n\])+size: * The size of the command history is.*" "show history" 628#test show language 629gdb_test "show language" "The current source language is \"auto; currently c\"." "show language" 630#test show listsize 631gdb_test "show listsize" "Number of source lines gdb will list by default is 10." "show listsize" 632#test show print "p" abbreviation 633gdb_test "show p" ".*" "show p" 634#test show print "pr" abbreviation 635gdb_test "show pr" ".*" "show pr" 636#test show print 637gdb_test "show print" ".*" "show print" 638#test show paths 639gdb_test "show paths" "Executable and object file path:.*" "show paths" 640#test show print address 641gdb_test "show print address" "Printing of addresses is on." "show print address" 642#test show print array 643gdb_test "show print array" "Prettyprinting of arrays is on." "show print array" 644#test show print asm-demangle 645gdb_test "show print asm-demangle" "Demangling of C\[+\]+/ObjC names in disassembly listings is on." "show print asm-demangle" 646#test show print demangle 647gdb_test "show print demangle" "Demangling of encoded C\[+\]+/ObjC names when displaying symbols is on." "show print demangle" 648#test show print elements 649gdb_test "show print elements" "Limit on string chars or array elements to print is 200." "show print elements" 650#test show print object 651gdb_test "show print object" "Printing of object's derived type based on vtable info is on." "show print object" 652#test show print pretty 653gdb_test "show print pretty" "Prettyprinting of structures is on." "show print pretty" 654#test show print sevenbit-strings 655gdb_test "show print sevenbit-strings" "Printing of 8-bit characters in strings as .nnn is on." "show print sevenbit-strings" 656#test show print union 657gdb_test "show print union" "Printing of unions interior to structures is on." "show print union" 658#test show print vtbl 659gdb_test "show print vtbl" "Printing of C\[+\]+ virtual function tables is on." "show print vtbl" 660#test show prompt 661# In the FAIL case, can't just look for $gdb_prompt because that will match 662# the output, rather than the prompt. So look for $gdb_prompt at the start 663# of a line. 664gdb_test "show prompt" "Gdb's prompt is \"$gdb_prompt \".*" "show prompt" 665#test show radix 666gdb_test "show radix" "Input and output radices set to decimal 10, hex a, octal 12." "show radix" 667#test show symbol-reloading 668gdb_test "show symbol-reloading" "Dynamic symbol table reloading multiple times in one run is on." "show symbol-reloading" 669#test show user 670gdb_test_no_output "show user" "show user" 671#test show values 672gdb_test_no_output "show values" "show values" 673#test show verbose 674gdb_test "show verbose" "Verbose printing of informational messages is o.*|Verbosity is off.*" "show verbose" 675#test show version 676gdb_test "show version" "GNU gdb \[0-9\.\]*(\[^\r\n\]*\[\r\n\])+Copyright \\(C\\) \[0-9\]* Free Software Foundation, Inc(\[^\r\n\]*\[\r\n\])+License GPLv3\\+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>(\[^\r\n\]*\[\r\n\])+This is free software: you are free to change and redistribute it.(\[^\r\n\]*\[\r\n\])+There is NO WARRANTY, to the extent permitted by law. Type \"show copying\"(\[^\r\n\]*\[\r\n\])+and \"show warranty\" for details..*" "show version" 677#test show width 678gdb_test "show width" "Number of characters gdb thinks are in a line is.*" "show width" 679#test show write 680# This is only supported on targets which use exec.o. 681gdb_test "show write" "Writing into executable and core files is o.*" "show write" 682#test show 683set show_confirm_seen 0 684set show_prompt_seen 0 685gdb_test_multiple "show" "show" { 686 -re "confirm: *Whether to confirm potentially dangerous operations is on.(\[^\r\n\]*\[\r\n\])+history filename: *The filename in which to record the command history is (\[^\r\n\]*\[\r\n\])+history save: *Saving of the history record on exit is on.(\[^\r\n\]*\[\r\n\])+history size: *The size of the command history is(\[^\r\n\]*\[\r\n\])+listsize: *Number of source lines gdb will list by default is 10(\[^\r\n]*\[\r\n\])+print elements: *Limit on string chars or array elements to print is 200." { 687 verbose "Confirm dislayed" 688 set show_confirm_seen 1 689 exp_continue 690 } 691 -re "Gdb's prompt is \"$gdb_prompt \"" { 692 verbose "GDB prompt displayed" 693 set show_prompt_seen 1 694 exp_continue 695 } 696 -re "Writing into executable.*$gdb_prompt $" { 697 verbose "write displayed" 698 if { $show_prompt_seen && $show_confirm_seen } { 699 pass "show" 700 } else { 701 verbose "prompt $show_prompt_seen confirm $show_confirm_seen" 702 fail "show (incomplete output)" 703 } 704 } 705} 706#test stepi "si" abbreviation 707gdb_test "si" "The program is not being run." "stepi \"si\" abbreviation" 708#test stepi 709gdb_test "stepi" "The program is not being run." "stepi" 710#test signal 711gdb_test "signal" "The program is not being run." "signal" 712#test source 713gdb_test "source" "source command requires file name of file to source..*|No such file or directory.*" "source" 714#test step "s" abbreviation 715gdb_test "s" "The program is not being run." "step \"s\" abbreviation #2" 716#test step 717gdb_test "step" "The program is not being run." "step #2" 718#test symbol-file 719gdb_test "symbol-file" ".*" "symbol-file" 720 721#test target child 722gdb_test "target child" "Use the \"run\" command to start a Unix child process.*|Undefined target command: \"child\". *Try \"help target\".*" "target child" 723 724#test target procfs 725gdb_test "target procfs" "Use the \"run\" command to start a Unix child process.*|Undefined target command: \"procfs\". *Try \"help target\".*" "target procfs" 726 727#test target core 728send_gdb "target core\n" 729gdb_expect { 730 -re "No core file specified..*$gdb_prompt $" { pass "target core" } 731 -re ".*A program is being debugged already. Kill it. .y or n.*$" { 732 send_gdb "n\n" 733 if $verbose>1 then { 734 send_user "\t\tDidn't kill program being debugged\n" 735 } 736 gdb_expect -re "$gdb_prompt $" { } 737 pass "target core" 738 } 739 -re "Undefined target command: \"core\". Try \"help target\"..*$gdb_prompt $" { pass "target core" } 740 -re ".*$gdb_prompt $" { fail "target core" } 741 timeout { fail "(timeout) target core" } 742} 743 744#test target exec 745send_gdb "target exec\n" 746gdb_expect { 747 -re "No executable file now..*$gdb_prompt $"\ 748 { pass "target exec" } 749 -re ".*A program is being debugged already. Kill it. .y or n.*$" { 750 send_gdb "n\n" 751 if $verbose>1 then { 752 send_user "\t\tDidn't kill program being debugged\n" 753 } 754 gdb_expect -re "$gdb_prompt $" { } 755 pass "target exec" 756 } 757 -re ".*$gdb_prompt $" { fail "target exec" } 758 timeout { fail "(timeout) target exec" } 759 } 760 761#test target remote 762if ![istarget "*-*-udi*"] then { 763 send_gdb "target remote\n" 764 gdb_expect { 765 -re "To open a remote debug connection, you need to specify what.*serial.*device is attached to the remote system.*.e.g. .*$gdb_prompt $"\ 766 { pass "target remote" } 767 -re ".*A program is being debugged already. Kill it. .y or n.*$" { 768 send_gdb "n\n" 769 if $verbose>1 then { 770 send_user "\t\tDidn't kill program being debugged\n" 771 } 772 gdb_expect -re "$gdb_prompt $" { } 773 pass "target remote" 774 } 775 -re ".*$gdb_prompt $" { fail "target remote" } 776 timeout { fail "(timeout) target remote" } 777 } 778} 779 780#test target 781gdb_test "target" "Argument required .target name.*" "target" 782#test tbreak 783gdb_test "tbreak" "No default breakpoint address now." "tbreak" 784#test thread 785gdb_test "thread" "No thread selected" "thread" 786#test thread apply 787gdb_test "thread apply" "Please specify a thread ID list" "thread apply" 788#test thread find 789gdb_test "thread find" "Command requires an argument." "thread find" 790#test thread name 791gdb_test "thread name" "No thread selected" "thread name" 792#test tty 793gdb_test "tty" "Argument required .filename to set it to\..*" "tty" 794#test until "u" abbreviation 795gdb_test "u" "The program is not being run." "until \"u\" abbreviation" 796#test until 797gdb_test "until" "The program is not being run." "until" 798#test undisplay 799# FIXME -- need to dump full output to detailed log 800 801gdb_test "undisplay" \ 802 "" \ 803 "undisplay prompt" \ 804 "Delete all auto-display expressions.*y or n. $" \ 805 "y" 806 807#test unset environment 808 809gdb_test "unset environment" \ 810 "" \ 811 "unset environment prompt" \ 812 "Delete all environment variables?.*y or n. $" \ 813 "y" 814 815#test unset 816gdb_test "unset" "\"unset\" must be followed by the name of an unset subcommand.(\[^\r\n\]*\[\r\n\])+List of unset subcommands:(\[^\r\n\]*\[\r\n\])+unset environment -- Cancel environment variable VAR for the program(\[^\r\n\]*\[\r\n\])+Type \"help unset\" followed by unset subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "unset" 817#test up 818#test up-silently 819gdb_test "up-silently" "No stack." "up-silently" 820#test watch 821gdb_test "watch" "Argument required .expression to compute.*" "watch" 822#test whatis 823gdb_test "whatis" "The history is empty." "whatis" 824#test where 825gdb_test "where" "No stack." "where" 826#test x 827gdb_test "x" "Argument required .starting display address.*" "x" 828 829gdb_exit 830 831set timeout $prev_timeout 832