wpa_ctrl.h revision 1.1.1.2
1/*
2 * wpa_supplicant/hostapd control interface library
3 * Copyright (c) 2004-2006, Jouni Malinen <j@w1.fi>
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License version 2 as
7 * published by the Free Software Foundation.
8 *
9 * Alternatively, this software may be distributed under the terms of BSD
10 * license.
11 *
12 * See README and COPYING for more details.
13 */
14
15#ifndef WPA_CTRL_H
16#define WPA_CTRL_H
17
18#ifdef  __cplusplus
19extern "C" {
20#endif
21
22/* wpa_supplicant control interface - fixed message prefixes */
23
24/** Interactive request for identity/password/pin */
25#define WPA_CTRL_REQ "CTRL-REQ-"
26
27/** Response to identity/password/pin request */
28#define WPA_CTRL_RSP "CTRL-RSP-"
29
30/* Event messages with fixed prefix */
31/** Authentication completed successfully and data connection enabled */
32#define WPA_EVENT_CONNECTED "CTRL-EVENT-CONNECTED "
33/** Disconnected, data connection is not available */
34#define WPA_EVENT_DISCONNECTED "CTRL-EVENT-DISCONNECTED "
35/** wpa_supplicant is exiting */
36#define WPA_EVENT_TERMINATING "CTRL-EVENT-TERMINATING "
37/** Password change was completed successfully */
38#define WPA_EVENT_PASSWORD_CHANGED "CTRL-EVENT-PASSWORD-CHANGED "
39/** EAP-Request/Notification received */
40#define WPA_EVENT_EAP_NOTIFICATION "CTRL-EVENT-EAP-NOTIFICATION "
41/** EAP authentication started (EAP-Request/Identity received) */
42#define WPA_EVENT_EAP_STARTED "CTRL-EVENT-EAP-STARTED "
43/** EAP method proposed by the server */
44#define WPA_EVENT_EAP_PROPOSED_METHOD "CTRL-EVENT-EAP-PROPOSED-METHOD "
45/** EAP method selected */
46#define WPA_EVENT_EAP_METHOD "CTRL-EVENT-EAP-METHOD "
47/** EAP peer certificate from TLS */
48#define WPA_EVENT_EAP_PEER_CERT "CTRL-EVENT-EAP-PEER-CERT "
49/** EAP TLS certificate chain validation error */
50#define WPA_EVENT_EAP_TLS_CERT_ERROR "CTRL-EVENT-EAP-TLS-CERT-ERROR "
51/** EAP authentication completed successfully */
52#define WPA_EVENT_EAP_SUCCESS "CTRL-EVENT-EAP-SUCCESS "
53/** EAP authentication failed (EAP-Failure received) */
54#define WPA_EVENT_EAP_FAILURE "CTRL-EVENT-EAP-FAILURE "
55/** New scan results available */
56#define WPA_EVENT_SCAN_RESULTS "CTRL-EVENT-SCAN-RESULTS "
57/** A new BSS entry was added (followed by BSS entry id and BSSID) */
58#define WPA_EVENT_BSS_ADDED "CTRL-EVENT-BSS-ADDED "
59/** A BSS entry was removed (followed by BSS entry id and BSSID) */
60#define WPA_EVENT_BSS_REMOVED "CTRL-EVENT-BSS-REMOVED "
61
62/** WPS overlap detected in PBC mode */
63#define WPS_EVENT_OVERLAP "WPS-OVERLAP-DETECTED "
64/** Available WPS AP with active PBC found in scan results */
65#define WPS_EVENT_AP_AVAILABLE_PBC "WPS-AP-AVAILABLE-PBC "
66/** Available WPS AP with recently selected PIN registrar found in scan results
67 */
68#define WPS_EVENT_AP_AVAILABLE_PIN "WPS-AP-AVAILABLE-PIN "
69/** Available WPS AP found in scan results */
70#define WPS_EVENT_AP_AVAILABLE "WPS-AP-AVAILABLE "
71/** A new credential received */
72#define WPS_EVENT_CRED_RECEIVED "WPS-CRED-RECEIVED "
73/** M2D received */
74#define WPS_EVENT_M2D "WPS-M2D "
75/** WPS registration failed after M2/M2D */
76#define WPS_EVENT_FAIL "WPS-FAIL "
77/** WPS registration completed successfully */
78#define WPS_EVENT_SUCCESS "WPS-SUCCESS "
79/** WPS enrollment attempt timed out and was terminated */
80#define WPS_EVENT_TIMEOUT "WPS-TIMEOUT "
81
82#define WPS_EVENT_ENROLLEE_SEEN "WPS-ENROLLEE-SEEN "
83
84/* WPS ER events */
85#define WPS_EVENT_ER_AP_ADD "WPS-ER-AP-ADD "
86#define WPS_EVENT_ER_AP_REMOVE "WPS-ER-AP-REMOVE "
87#define WPS_EVENT_ER_ENROLLEE_ADD "WPS-ER-ENROLLEE-ADD "
88#define WPS_EVENT_ER_ENROLLEE_REMOVE "WPS-ER-ENROLLEE-REMOVE "
89
90/* hostapd control interface - fixed message prefixes */
91#define WPS_EVENT_PIN_NEEDED "WPS-PIN-NEEDED "
92#define WPS_EVENT_NEW_AP_SETTINGS "WPS-NEW-AP-SETTINGS "
93#define WPS_EVENT_REG_SUCCESS "WPS-REG-SUCCESS "
94#define WPS_EVENT_AP_SETUP_LOCKED "WPS-AP-SETUP-LOCKED "
95#define WPS_EVENT_AP_SETUP_UNLOCKED "WPS-AP-SETUP-UNLOCKED "
96#define WPS_EVENT_AP_PIN_ENABLED "WPS-AP-PIN-ENABLED "
97#define WPS_EVENT_AP_PIN_DISABLED "WPS-AP-PIN-DISABLED "
98#define AP_STA_CONNECTED "AP-STA-CONNECTED "
99#define AP_STA_DISCONNECTED "AP-STA-DISCONNECTED "
100
101
102/* wpa_supplicant/hostapd control interface access */
103
104/**
105 * wpa_ctrl_open - Open a control interface to wpa_supplicant/hostapd
106 * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used.
107 * Returns: Pointer to abstract control interface data or %NULL on failure
108 *
109 * This function is used to open a control interface to wpa_supplicant/hostapd.
110 * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd. This path
111 * is configured in wpa_supplicant/hostapd and other programs using the control
112 * interface need to use matching path configuration.
113 */
114struct wpa_ctrl * wpa_ctrl_open(const char *ctrl_path);
115
116
117/**
118 * wpa_ctrl_close - Close a control interface to wpa_supplicant/hostapd
119 * @ctrl: Control interface data from wpa_ctrl_open()
120 *
121 * This function is used to close a control interface.
122 */
123void wpa_ctrl_close(struct wpa_ctrl *ctrl);
124
125
126/**
127 * wpa_ctrl_request - Send a command to wpa_supplicant/hostapd
128 * @ctrl: Control interface data from wpa_ctrl_open()
129 * @cmd: Command; usually, ASCII text, e.g., "PING"
130 * @cmd_len: Length of the cmd in bytes
131 * @reply: Buffer for the response
132 * @reply_len: Reply buffer length
133 * @msg_cb: Callback function for unsolicited messages or %NULL if not used
134 * Returns: 0 on success, -1 on error (send or receive failed), -2 on timeout
135 *
136 * This function is used to send commands to wpa_supplicant/hostapd. Received
137 * response will be written to reply and reply_len is set to the actual length
138 * of the reply. This function will block for up to two seconds while waiting
139 * for the reply. If unsolicited messages are received, the blocking time may
140 * be longer.
141 *
142 * msg_cb can be used to register a callback function that will be called for
143 * unsolicited messages received while waiting for the command response. These
144 * messages may be received if wpa_ctrl_request() is called at the same time as
145 * wpa_supplicant/hostapd is sending such a message. This can happen only if
146 * the program has used wpa_ctrl_attach() to register itself as a monitor for
147 * event messages. Alternatively to msg_cb, programs can register two control
148 * interface connections and use one of them for commands and the other one for
149 * receiving event messages, in other words, call wpa_ctrl_attach() only for
150 * the control interface connection that will be used for event messages.
151 */
152int wpa_ctrl_request(struct wpa_ctrl *ctrl, const char *cmd, size_t cmd_len,
153		     char *reply, size_t *reply_len,
154		     void (*msg_cb)(char *msg, size_t len));
155
156
157/**
158 * wpa_ctrl_attach - Register as an event monitor for the control interface
159 * @ctrl: Control interface data from wpa_ctrl_open()
160 * Returns: 0 on success, -1 on failure, -2 on timeout
161 *
162 * This function registers the control interface connection as a monitor for
163 * wpa_supplicant/hostapd events. After a success wpa_ctrl_attach() call, the
164 * control interface connection starts receiving event messages that can be
165 * read with wpa_ctrl_recv().
166 */
167int wpa_ctrl_attach(struct wpa_ctrl *ctrl);
168
169
170/**
171 * wpa_ctrl_detach - Unregister event monitor from the control interface
172 * @ctrl: Control interface data from wpa_ctrl_open()
173 * Returns: 0 on success, -1 on failure, -2 on timeout
174 *
175 * This function unregisters the control interface connection as a monitor for
176 * wpa_supplicant/hostapd events, i.e., cancels the registration done with
177 * wpa_ctrl_attach().
178 */
179int wpa_ctrl_detach(struct wpa_ctrl *ctrl);
180
181
182/**
183 * wpa_ctrl_recv - Receive a pending control interface message
184 * @ctrl: Control interface data from wpa_ctrl_open()
185 * @reply: Buffer for the message data
186 * @reply_len: Length of the reply buffer
187 * Returns: 0 on success, -1 on failure
188 *
189 * This function will receive a pending control interface message. This
190 * function will block if no messages are available. The received response will
191 * be written to reply and reply_len is set to the actual length of the reply.
192 * wpa_ctrl_recv() is only used for event messages, i.e., wpa_ctrl_attach()
193 * must have been used to register the control interface as an event monitor.
194 */
195int wpa_ctrl_recv(struct wpa_ctrl *ctrl, char *reply, size_t *reply_len);
196
197
198/**
199 * wpa_ctrl_pending - Check whether there are pending event messages
200 * @ctrl: Control interface data from wpa_ctrl_open()
201 * Returns: 1 if there are pending messages, 0 if no, or -1 on error
202 *
203 * This function will check whether there are any pending control interface
204 * message available to be received with wpa_ctrl_recv(). wpa_ctrl_pending() is
205 * only used for event messages, i.e., wpa_ctrl_attach() must have been used to
206 * register the control interface as an event monitor.
207 */
208int wpa_ctrl_pending(struct wpa_ctrl *ctrl);
209
210
211/**
212 * wpa_ctrl_get_fd - Get file descriptor used by the control interface
213 * @ctrl: Control interface data from wpa_ctrl_open()
214 * Returns: File descriptor used for the connection
215 *
216 * This function can be used to get the file descriptor that is used for the
217 * control interface connection. The returned value can be used, e.g., with
218 * select() while waiting for multiple events.
219 *
220 * The returned file descriptor must not be used directly for sending or
221 * receiving packets; instead, the library functions wpa_ctrl_request() and
222 * wpa_ctrl_recv() must be used for this.
223 */
224int wpa_ctrl_get_fd(struct wpa_ctrl *ctrl);
225
226#ifdef CONFIG_CTRL_IFACE_UDP
227#define WPA_CTRL_IFACE_PORT 9877
228#define WPA_GLOBAL_CTRL_IFACE_PORT 9878
229#endif /* CONFIG_CTRL_IFACE_UDP */
230
231
232#ifdef  __cplusplus
233}
234#endif
235
236#endif /* WPA_CTRL_H */
237