1# Makefile.in generated by automake 1.11 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 5# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, 6# Inc. 7# This Makefile.in is free software; the Free Software Foundation 8# gives unlimited permission to copy and/or distribute it, 9# with or without modifications, as long as this notice is preserved. 10 11# This program is distributed in the hope that it will be useful, 12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 14# PARTICULAR PURPOSE. 15 16@SET_MAKE@ 17 18################################################################ 19# Copyright (c) 2000 Carnegie Mellon University. All rights reserved. 20# 21# Redistribution and use in source and binary forms, with or without 22# modification, are permitted provided that the following conditions 23# are met: 24# 25# 1. Redistributions of source code must retain the above copyright 26# notice, this list of conditions and the following disclaimer. 27# 28# 2. Redistributions in binary form must reproduce the above copyright 29# notice, this list of conditions and the following disclaimer in 30# the documentation and/or other materials provided with the 31# distribution. 32# 33# 3. The name "Carnegie Mellon University" must not be used to 34# endorse or promote products derived from this software without 35# prior written permission. For permission or any other legal 36# details, please contact 37# Office of Technology Transfer 38# Carnegie Mellon University 39# 5000 Forbes Avenue 40# Pittsburgh, PA 15213-3890 41# (412) 268-4387, fax: (412) 268-7395 42# tech-transfer@andrew.cmu.edu 43# 44# 4. Redistributions of any form whatsoever must retain the following 45# acknowledgment: 46# "This product includes software developed by Computing Services 47# at Carnegie Mellon University (http://www.cmu.edu/computing/)." 48# 49# CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO 50# THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY 51# AND FITNESS, IN NO EVENT SHALL CARNEGIE MELLON UNIVERSITY BE LIABLE 52# FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 53# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN 54# AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING 55# OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 56# 57################################################################ 58VPATH = @srcdir@ 59pkgdatadir = $(datadir)/@PACKAGE@ 60pkgincludedir = $(includedir)/@PACKAGE@ 61pkglibdir = $(libdir)/@PACKAGE@ 62pkglibexecdir = $(libexecdir)/@PACKAGE@ 63am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 64install_sh_DATA = $(install_sh) -c -m 644 65install_sh_PROGRAM = $(install_sh) -c 66install_sh_SCRIPT = $(install_sh) -c 67INSTALL_HEADER = $(INSTALL_DATA) 68transform = $(program_transform_name) 69NORMAL_INSTALL = : 70PRE_INSTALL = : 71POST_INSTALL = : 72NORMAL_UNINSTALL = : 73PRE_UNINSTALL = : 74POST_UNINSTALL = : 75build_triplet = @build@ 76host_triplet = @host@ 77target_triplet = @target@ 78subdir = java/javax/security/auth 79DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in 80ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 81am__aclocal_m4_deps = $(top_srcdir)/config/kerberos_v4.m4 \ 82 $(top_srcdir)/config/libtool.m4 $(top_srcdir)/config/plain.m4 \ 83 $(top_srcdir)/config/sasldb.m4 \ 84 $(top_srcdir)/cmulocal/berkdb.m4 \ 85 $(top_srcdir)/cmulocal/bsd_sockets.m4 \ 86 $(top_srcdir)/cmulocal/c-attribute.m4 \ 87 $(top_srcdir)/cmulocal/common.m4 \ 88 $(top_srcdir)/cmulocal/cyrus.m4 \ 89 $(top_srcdir)/cmulocal/init_automake.m4 \ 90 $(top_srcdir)/cmulocal/ipv6.m4 \ 91 $(top_srcdir)/cmulocal/openldap.m4 \ 92 $(top_srcdir)/cmulocal/openssl.m4 \ 93 $(top_srcdir)/cmulocal/sasl2.m4 $(top_srcdir)/configure.in 94am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 95 $(ACLOCAL_M4) 96mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs 97CONFIG_HEADER = $(top_builddir)/config.h 98CONFIG_CLEAN_FILES = 99CONFIG_CLEAN_VPATH_FILES = 100SOURCES = 101DIST_SOURCES = 102RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ 103 html-recursive info-recursive install-data-recursive \ 104 install-dvi-recursive install-exec-recursive \ 105 install-html-recursive install-info-recursive \ 106 install-pdf-recursive install-ps-recursive install-recursive \ 107 installcheck-recursive installdirs-recursive pdf-recursive \ 108 ps-recursive uninstall-recursive 109RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 110 distclean-recursive maintainer-clean-recursive 111AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ 112 $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ 113 distdir 114ETAGS = etags 115CTAGS = ctags 116DIST_SUBDIRS = $(SUBDIRS) 117DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 118am__relativize = \ 119 dir0=`pwd`; \ 120 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 121 sed_rest='s,^[^/]*/*,,'; \ 122 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 123 sed_butlast='s,/*[^/]*$$,,'; \ 124 while test -n "$$dir1"; do \ 125 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 126 if test "$$first" != "."; then \ 127 if test "$$first" = ".."; then \ 128 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 129 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 130 else \ 131 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 132 if test "$$first2" = "$$first"; then \ 133 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 134 else \ 135 dir2="../$$dir2"; \ 136 fi; \ 137 dir0="$$dir0"/"$$first"; \ 138 fi; \ 139 fi; \ 140 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 141 done; \ 142 reldir="$$dir2" 143ACLOCAL = @ACLOCAL@ 144AMTAR = @AMTAR@ 145AUTOCONF = @AUTOCONF@ 146AUTOHEADER = @AUTOHEADER@ 147AUTOMAKE = @AUTOMAKE@ 148AWK = @AWK@ 149CC = @CC@ 150CCDEPMODE = @CCDEPMODE@ 151CFLAGS = @CFLAGS@ 152CMU_LIB_SUBDIR = @CMU_LIB_SUBDIR@ 153CPP = @CPP@ 154CPPFLAGS = @CPPFLAGS@ 155CYGPATH_W = @CYGPATH_W@ 156DEFS = @DEFS@ 157DEPDIR = @DEPDIR@ 158DIRS = @DIRS@ 159DMALLOC_LIBS = @DMALLOC_LIBS@ 160ECHO_C = @ECHO_C@ 161ECHO_N = @ECHO_N@ 162ECHO_T = @ECHO_T@ 163EGREP = @EGREP@ 164EXEEXT = @EXEEXT@ 165GETADDRINFOOBJS = @GETADDRINFOOBJS@ 166GETNAMEINFOOBJS = @GETNAMEINFOOBJS@ 167GETSUBOPT = @GETSUBOPT@ 168GREP = @GREP@ 169GSSAPIBASE_LIBS = @GSSAPIBASE_LIBS@ 170GSSAPI_LIBS = @GSSAPI_LIBS@ 171INSTALL = @INSTALL@ 172INSTALL_DATA = @INSTALL_DATA@ 173INSTALL_PROGRAM = @INSTALL_PROGRAM@ 174INSTALL_SCRIPT = @INSTALL_SCRIPT@ 175INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 176IPCTYPE = @IPCTYPE@ 177JAVAC = @JAVAC@ 178JAVADOC = @JAVADOC@ 179JAVAH = @JAVAH@ 180JAVAROOT = @JAVAROOT@ 181JAVA_INCLUDES = @JAVA_INCLUDES@ 182LDFLAGS = @LDFLAGS@ 183LIBOBJS = @LIBOBJS@ 184LIBS = @LIBS@ 185LIBTOOL = @LIBTOOL@ 186LIB_CRYPT = @LIB_CRYPT@ 187LIB_DES = @LIB_DES@ 188LIB_DOOR = @LIB_DOOR@ 189LIB_LDAP = @LIB_LDAP@ 190LIB_MYSQL = @LIB_MYSQL@ 191LIB_PGSQL = @LIB_PGSQL@ 192LIB_SOCKET = @LIB_SOCKET@ 193LIB_SQLITE = @LIB_SQLITE@ 194LIB_SQLITE3 = @LIB_SQLITE3@ 195LN_S = @LN_S@ 196LTGETADDRINFOOBJS = @LTGETADDRINFOOBJS@ 197LTGETNAMEINFOOBJS = @LTGETNAMEINFOOBJS@ 198LTLIBOBJS = @LTLIBOBJS@ 199LTSNPRINTFOBJS = @LTSNPRINTFOBJS@ 200MAKEINFO = @MAKEINFO@ 201MKDIR_P = @MKDIR_P@ 202NM = @NM@ 203NTLM_LIBS = @NTLM_LIBS@ 204OBJEXT = @OBJEXT@ 205OTP_LIBS = @OTP_LIBS@ 206PACKAGE = @PACKAGE@ 207PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 208PACKAGE_NAME = @PACKAGE_NAME@ 209PACKAGE_STRING = @PACKAGE_STRING@ 210PACKAGE_TARNAME = @PACKAGE_TARNAME@ 211PACKAGE_VERSION = @PACKAGE_VERSION@ 212PASSDSS_LIBS = @PASSDSS_LIBS@ 213PATH_SEPARATOR = @PATH_SEPARATOR@ 214PLAIN_LIBS = @PLAIN_LIBS@ 215PURECOV = @PURECOV@ 216PURIFY = @PURIFY@ 217PWCHECKMETH = @PWCHECKMETH@ 218RANLIB = @RANLIB@ 219SASL_DB_BACKEND = @SASL_DB_BACKEND@ 220SASL_DB_BACKEND_STATIC = @SASL_DB_BACKEND_STATIC@ 221SASL_DB_INC = @SASL_DB_INC@ 222SASL_DB_LIB = @SASL_DB_LIB@ 223SASL_DB_MANS = @SASL_DB_MANS@ 224SASL_DB_UTILS = @SASL_DB_UTILS@ 225SASL_DL_LIB = @SASL_DL_LIB@ 226SASL_KRB_LIB = @SASL_KRB_LIB@ 227SASL_MECHS = @SASL_MECHS@ 228SASL_STATIC_LIBS = @SASL_STATIC_LIBS@ 229SASL_STATIC_OBJS = @SASL_STATIC_OBJS@ 230SASL_STATIC_SRCS = @SASL_STATIC_SRCS@ 231SASL_UTIL_HEADERS_EXTRA = @SASL_UTIL_HEADERS_EXTRA@ 232SASL_UTIL_LIBS_EXTRA = @SASL_UTIL_LIBS_EXTRA@ 233SCRAM_LIBS = @SCRAM_LIBS@ 234SET_MAKE = @SET_MAKE@ 235SFIO_INC_FLAGS = @SFIO_INC_FLAGS@ 236SFIO_LIB_FLAGS = @SFIO_LIB_FLAGS@ 237SHELL = @SHELL@ 238SMTPTEST_PROGRAM = @SMTPTEST_PROGRAM@ 239SNPRINTFOBJS = @SNPRINTFOBJS@ 240SRP_LIBS = @SRP_LIBS@ 241STRIP = @STRIP@ 242VERSION = @VERSION@ 243abs_builddir = @abs_builddir@ 244abs_srcdir = @abs_srcdir@ 245abs_top_builddir = @abs_top_builddir@ 246abs_top_srcdir = @abs_top_srcdir@ 247ac_ct_CC = @ac_ct_CC@ 248am__include = @am__include@ 249am__leading_dot = @am__leading_dot@ 250am__quote = @am__quote@ 251am__tar = @am__tar@ 252am__untar = @am__untar@ 253bindir = @bindir@ 254build = @build@ 255build_alias = @build_alias@ 256build_cpu = @build_cpu@ 257build_os = @build_os@ 258build_vendor = @build_vendor@ 259builddir = @builddir@ 260configdir = @configdir@ 261datadir = @datadir@ 262datarootdir = @datarootdir@ 263docdir = @docdir@ 264dvidir = @dvidir@ 265exec_prefix = @exec_prefix@ 266host = @host@ 267host_alias = @host_alias@ 268host_cpu = @host_cpu@ 269host_os = @host_os@ 270host_vendor = @host_vendor@ 271htmldir = @htmldir@ 272includedir = @includedir@ 273infodir = @infodir@ 274install_sh = @install_sh@ 275libdir = @libdir@ 276libexecdir = @libexecdir@ 277localedir = @localedir@ 278localstatedir = @localstatedir@ 279mandir = @mandir@ 280mkdir_p = @mkdir_p@ 281oldincludedir = @oldincludedir@ 282pdfdir = @pdfdir@ 283plugindir = @plugindir@ 284prefix = @prefix@ 285program_transform_name = @program_transform_name@ 286psdir = @psdir@ 287sbindir = @sbindir@ 288sharedstatedir = @sharedstatedir@ 289srcdir = @srcdir@ 290subdirs = @subdirs@ 291sysconfdir = @sysconfdir@ 292target = @target@ 293target_alias = @target_alias@ 294target_cpu = @target_cpu@ 295target_os = @target_os@ 296target_vendor = @target_vendor@ 297top_build_prefix = @top_build_prefix@ 298top_builddir = @top_builddir@ 299top_srcdir = @top_srcdir@ 300SUBDIRS = callback 301all: all-recursive 302 303.SUFFIXES: 304$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 305 @for dep in $?; do \ 306 case '$(am__configure_deps)' in \ 307 *$$dep*) \ 308 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ 309 && { if test -f $@; then exit 0; else break; fi; }; \ 310 exit 1;; \ 311 esac; \ 312 done; \ 313 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu java/javax/security/auth/Makefile'; \ 314 $(am__cd) $(top_srcdir) && \ 315 $(AUTOMAKE) --gnu java/javax/security/auth/Makefile 316.PRECIOUS: Makefile 317Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 318 @case '$?' in \ 319 *config.status*) \ 320 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ 321 *) \ 322 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ 323 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ 324 esac; 325 326$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 327 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 328 329$(top_srcdir)/configure: $(am__configure_deps) 330 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 331$(ACLOCAL_M4): $(am__aclocal_m4_deps) 332 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 333$(am__aclocal_m4_deps): 334 335mostlyclean-libtool: 336 -rm -f *.lo 337 338clean-libtool: 339 -rm -rf .libs _libs 340 341# This directory's subdirectories are mostly independent; you can cd 342# into them and run `make' without going through this Makefile. 343# To change the values of `make' variables: instead of editing Makefiles, 344# (1) if the variable is set in `config.status', edit `config.status' 345# (which will cause the Makefiles to be regenerated when you run `make'); 346# (2) otherwise, pass the desired values on the `make' command line. 347$(RECURSIVE_TARGETS): 348 @failcom='exit 1'; \ 349 for f in x $$MAKEFLAGS; do \ 350 case $$f in \ 351 *=* | --[!k]*);; \ 352 *k*) failcom='fail=yes';; \ 353 esac; \ 354 done; \ 355 dot_seen=no; \ 356 target=`echo $@ | sed s/-recursive//`; \ 357 list='$(SUBDIRS)'; for subdir in $$list; do \ 358 echo "Making $$target in $$subdir"; \ 359 if test "$$subdir" = "."; then \ 360 dot_seen=yes; \ 361 local_target="$$target-am"; \ 362 else \ 363 local_target="$$target"; \ 364 fi; \ 365 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 366 || eval $$failcom; \ 367 done; \ 368 if test "$$dot_seen" = "no"; then \ 369 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 370 fi; test -z "$$fail" 371 372$(RECURSIVE_CLEAN_TARGETS): 373 @failcom='exit 1'; \ 374 for f in x $$MAKEFLAGS; do \ 375 case $$f in \ 376 *=* | --[!k]*);; \ 377 *k*) failcom='fail=yes';; \ 378 esac; \ 379 done; \ 380 dot_seen=no; \ 381 case "$@" in \ 382 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 383 *) list='$(SUBDIRS)' ;; \ 384 esac; \ 385 rev=''; for subdir in $$list; do \ 386 if test "$$subdir" = "."; then :; else \ 387 rev="$$subdir $$rev"; \ 388 fi; \ 389 done; \ 390 rev="$$rev ."; \ 391 target=`echo $@ | sed s/-recursive//`; \ 392 for subdir in $$rev; do \ 393 echo "Making $$target in $$subdir"; \ 394 if test "$$subdir" = "."; then \ 395 local_target="$$target-am"; \ 396 else \ 397 local_target="$$target"; \ 398 fi; \ 399 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 400 || eval $$failcom; \ 401 done && test -z "$$fail" 402tags-recursive: 403 list='$(SUBDIRS)'; for subdir in $$list; do \ 404 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ 405 done 406ctags-recursive: 407 list='$(SUBDIRS)'; for subdir in $$list; do \ 408 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ 409 done 410 411ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) 412 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ 413 unique=`for i in $$list; do \ 414 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 415 done | \ 416 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 417 END { if (nonempty) { for (i in files) print i; }; }'`; \ 418 mkid -fID $$unique 419tags: TAGS 420 421TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ 422 $(TAGS_FILES) $(LISP) 423 set x; \ 424 here=`pwd`; \ 425 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 426 include_option=--etags-include; \ 427 empty_fix=.; \ 428 else \ 429 include_option=--include; \ 430 empty_fix=; \ 431 fi; \ 432 list='$(SUBDIRS)'; for subdir in $$list; do \ 433 if test "$$subdir" = .; then :; else \ 434 test ! -f $$subdir/TAGS || \ 435 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 436 fi; \ 437 done; \ 438 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ 439 unique=`for i in $$list; do \ 440 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 441 done | \ 442 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 443 END { if (nonempty) { for (i in files) print i; }; }'`; \ 444 shift; \ 445 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 446 test -n "$$unique" || unique=$$empty_fix; \ 447 if test $$# -gt 0; then \ 448 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 449 "$$@" $$unique; \ 450 else \ 451 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 452 $$unique; \ 453 fi; \ 454 fi 455ctags: CTAGS 456CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ 457 $(TAGS_FILES) $(LISP) 458 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ 459 unique=`for i in $$list; do \ 460 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 461 done | \ 462 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 463 END { if (nonempty) { for (i in files) print i; }; }'`; \ 464 test -z "$(CTAGS_ARGS)$$unique" \ 465 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 466 $$unique 467 468GTAGS: 469 here=`$(am__cd) $(top_builddir) && pwd` \ 470 && $(am__cd) $(top_srcdir) \ 471 && gtags -i $(GTAGS_ARGS) "$$here" 472 473distclean-tags: 474 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 475 476distdir: $(DISTFILES) 477 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 478 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 479 list='$(DISTFILES)'; \ 480 dist_files=`for file in $$list; do echo $$file; done | \ 481 sed -e "s|^$$srcdirstrip/||;t" \ 482 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 483 case $$dist_files in \ 484 */*) $(MKDIR_P) `echo "$$dist_files" | \ 485 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 486 sort -u` ;; \ 487 esac; \ 488 for file in $$dist_files; do \ 489 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 490 if test -d $$d/$$file; then \ 491 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 492 if test -d "$(distdir)/$$file"; then \ 493 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 494 fi; \ 495 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 496 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 497 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 498 fi; \ 499 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 500 else \ 501 test -f "$(distdir)/$$file" \ 502 || cp -p $$d/$$file "$(distdir)/$$file" \ 503 || exit 1; \ 504 fi; \ 505 done 506 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 507 if test "$$subdir" = .; then :; else \ 508 test -d "$(distdir)/$$subdir" \ 509 || $(MKDIR_P) "$(distdir)/$$subdir" \ 510 || exit 1; \ 511 fi; \ 512 done 513 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 514 if test "$$subdir" = .; then :; else \ 515 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 516 $(am__relativize); \ 517 new_distdir=$$reldir; \ 518 dir1=$$subdir; dir2="$(top_distdir)"; \ 519 $(am__relativize); \ 520 new_top_distdir=$$reldir; \ 521 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 522 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 523 ($(am__cd) $$subdir && \ 524 $(MAKE) $(AM_MAKEFLAGS) \ 525 top_distdir="$$new_top_distdir" \ 526 distdir="$$new_distdir" \ 527 am__remove_distdir=: \ 528 am__skip_length_check=: \ 529 am__skip_mode_fix=: \ 530 distdir) \ 531 || exit 1; \ 532 fi; \ 533 done 534check-am: all-am 535check: check-recursive 536all-am: Makefile 537installdirs: installdirs-recursive 538installdirs-am: 539install: install-recursive 540install-exec: install-exec-recursive 541install-data: install-data-recursive 542uninstall: uninstall-recursive 543 544install-am: all-am 545 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 546 547installcheck: installcheck-recursive 548install-strip: 549 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 550 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 551 `test -z '$(STRIP)' || \ 552 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install 553mostlyclean-generic: 554 555clean-generic: 556 557distclean-generic: 558 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 559 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 560 561maintainer-clean-generic: 562 @echo "This command is intended for maintainers to use" 563 @echo "it deletes files that may require special tools to rebuild." 564clean: clean-recursive 565 566clean-am: clean-generic clean-libtool mostlyclean-am 567 568distclean: distclean-recursive 569 -rm -f Makefile 570distclean-am: clean-am distclean-generic distclean-tags 571 572dvi: dvi-recursive 573 574dvi-am: 575 576html: html-recursive 577 578html-am: 579 580info: info-recursive 581 582info-am: 583 584install-data-am: 585 586install-dvi: install-dvi-recursive 587 588install-dvi-am: 589 590install-exec-am: 591 592install-html: install-html-recursive 593 594install-html-am: 595 596install-info: install-info-recursive 597 598install-info-am: 599 600install-man: 601 602install-pdf: install-pdf-recursive 603 604install-pdf-am: 605 606install-ps: install-ps-recursive 607 608install-ps-am: 609 610installcheck-am: 611 612maintainer-clean: maintainer-clean-recursive 613 -rm -f Makefile 614maintainer-clean-am: distclean-am maintainer-clean-generic 615 616mostlyclean: mostlyclean-recursive 617 618mostlyclean-am: mostlyclean-generic mostlyclean-libtool 619 620pdf: pdf-recursive 621 622pdf-am: 623 624ps: ps-recursive 625 626ps-am: 627 628uninstall-am: 629 630.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ 631 install-am install-strip tags-recursive 632 633.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ 634 all all-am check check-am clean clean-generic clean-libtool \ 635 ctags ctags-recursive distclean distclean-generic \ 636 distclean-libtool distclean-tags distdir dvi dvi-am html \ 637 html-am info info-am install install-am install-data \ 638 install-data-am install-dvi install-dvi-am install-exec \ 639 install-exec-am install-html install-html-am install-info \ 640 install-info-am install-man install-pdf install-pdf-am \ 641 install-ps install-ps-am install-strip installcheck \ 642 installcheck-am installdirs installdirs-am maintainer-clean \ 643 maintainer-clean-generic mostlyclean mostlyclean-generic \ 644 mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ 645 uninstall uninstall-am 646 647 648# Tell versions [3.59,3.63) of GNU make to not export all variables. 649# Otherwise a system limit (for SysV at least) may be exceeded. 650.NOEXPORT: 651