1#***************************************************************************
2#                                  _   _ ____  _
3#  Project                     ___| | | |  _ \| |
4#                             / __| | | | |_) | |
5#                            | (__| |_| |  _ <| |___
6#                             \___|\___/|_| \_\_____|
7#
8# Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
9#
10# This software is licensed as described in the file COPYING, which
11# you should have received as part of this distribution. The terms
12# are also available at http://curl.haxx.se/docs/copyright.html.
13#
14# You may opt to use, copy, modify, merge, publish, distribute and/or sell
15# copies of the Software, and permit persons to whom the Software is
16# furnished to do so, under the terms of the COPYING file.
17#
18# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
19# KIND, either express or implied.
20#
21#***************************************************************************
22
23package sshhelp;
24
25use strict;
26use warnings;
27use Exporter;
28use File::Spec;
29
30
31#***************************************************************************
32# Global symbols allowed without explicit package name
33#
34use vars qw(
35    @ISA
36    @EXPORT_OK
37    $sshdexe
38    $sshexe
39    $sftpsrvexe
40    $sftpexe
41    $sshkeygenexe
42    $httptlssrvexe
43    $sshdconfig
44    $sshconfig
45    $sftpconfig
46    $knownhosts
47    $sshdlog
48    $sshlog
49    $sftplog
50    $sftpcmds
51    $hstprvkeyf
52    $hstpubkeyf
53    $cliprvkeyf
54    $clipubkeyf
55    @sftppath
56    @httptlssrvpath
57    );
58
59
60#***************************************************************************
61# Inherit Exporter's capabilities
62#
63@ISA = qw(Exporter);
64
65
66#***************************************************************************
67# Global symbols this module will export upon request
68#
69@EXPORT_OK = qw(
70    $sshdexe
71    $sshexe
72    $sftpsrvexe
73    $sftpexe
74    $sshkeygenexe
75    $sshdconfig
76    $sshconfig
77    $sftpconfig
78    $knownhosts
79    $sshdlog
80    $sshlog
81    $sftplog
82    $sftpcmds
83    $hstprvkeyf
84    $hstpubkeyf
85    $cliprvkeyf
86    $clipubkeyf
87    display_sshdconfig
88    display_sshconfig
89    display_sftpconfig
90    display_sshdlog
91    display_sshlog
92    display_sftplog
93    dump_array
94    exe_ext
95    find_sshd
96    find_ssh
97    find_sftpsrv
98    find_sftp
99    find_sshkeygen
100    find_httptlssrv
101    logmsg
102    sshversioninfo
103    );
104
105
106#***************************************************************************
107# Global variables initialization
108#
109$sshdexe         = 'sshd'        .exe_ext(); # base name and ext of ssh daemon
110$sshexe          = 'ssh'         .exe_ext(); # base name and ext of ssh client
111$sftpsrvexe      = 'sftp-server' .exe_ext(); # base name and ext of sftp-server
112$sftpexe         = 'sftp'        .exe_ext(); # base name and ext of sftp client
113$sshkeygenexe    = 'ssh-keygen'  .exe_ext(); # base name and ext of ssh-keygen
114$httptlssrvexe   = 'gnutls-serv' .exe_ext(); # base name and ext of gnutls-serv
115$sshdconfig      = 'curl_sshd_config';       # ssh daemon config file
116$sshconfig       = 'curl_ssh_config';        # ssh client config file
117$sftpconfig      = 'curl_sftp_config';       # sftp client config file
118$sshdlog         = undef;                    # ssh daemon log file
119$sshlog          = undef;                    # ssh client log file
120$sftplog         = undef;                    # sftp client log file
121$sftpcmds        = 'curl_sftp_cmds';         # sftp client commands batch file
122$knownhosts      = 'curl_client_knownhosts'; # ssh knownhosts file
123$hstprvkeyf      = 'curl_host_dsa_key';      # host private key file
124$hstpubkeyf      = 'curl_host_dsa_key.pub';  # host public key file
125$cliprvkeyf      = 'curl_client_key';        # client private key file
126$clipubkeyf      = 'curl_client_key.pub';    # client public key file
127
128
129#***************************************************************************
130# Absolute paths where to look for sftp-server plugin, when not in PATH
131#
132@sftppath = qw(
133    /usr/lib/openssh
134    /usr/libexec/openssh
135    /usr/libexec
136    /usr/local/libexec
137    /opt/local/libexec
138    /usr/lib/ssh
139    /usr/libexec/ssh
140    /usr/sbin
141    /usr/lib
142    /usr/lib/ssh/openssh
143    /usr/lib64/ssh
144    /usr/lib64/misc
145    /usr/lib/misc
146    /usr/local/sbin
147    /usr/freeware/bin
148    /usr/freeware/sbin
149    /usr/freeware/libexec
150    /opt/ssh/sbin
151    /opt/ssh/libexec
152    );
153
154
155#***************************************************************************
156# Absolute paths where to look for httptlssrv (gnutls-serv), when not in PATH
157#
158@httptlssrvpath = qw(
159    /usr/sbin
160    /usr/libexec
161    /usr/lib
162    /usr/lib/misc
163    /usr/lib64/misc
164    /usr/local/bin
165    /usr/local/sbin
166    /usr/local/libexec
167    /opt/local/bin
168    /opt/local/sbin
169    /opt/local/libexec
170    /usr/freeware/bin
171    /usr/freeware/sbin
172    /usr/freeware/libexec
173    /opt/gnutls/bin
174    /opt/gnutls/sbin
175    /opt/gnutls/libexec
176    );
177
178
179#***************************************************************************
180# Return file extension for executable files on this operating system
181#
182sub exe_ext {
183    if ($^O eq 'MSWin32' || $^O eq 'cygwin' || $^O eq 'msys' ||
184        $^O eq 'dos' || $^O eq 'os2') {
185        return '.exe';
186    }
187}
188
189
190#***************************************************************************
191# Create or overwrite the given file with lines from an array of strings
192#
193sub dump_array {
194    my ($filename, @arr) = @_;
195    my $error;
196
197    if(!$filename) {
198        $error = 'Error: Missing argument 1 for dump_array()';
199    }
200    elsif(open(TEXTFH, ">$filename")) {
201        foreach my $line (@arr) {
202            $line .= "\n" unless($line =~ /\n$/);
203            print TEXTFH $line;
204        }
205        if(!close(TEXTFH)) {
206            $error = "Error: cannot close file $filename";
207        }
208    }
209    else {
210        $error = "Error: cannot write file $filename";
211    }
212    return $error;
213}
214
215
216#***************************************************************************
217# Display a message
218#
219sub logmsg {
220    my ($line) = @_;
221    chomp $line if($line);
222    $line .= "\n";
223    print "$line";
224}
225
226
227#***************************************************************************
228# Display contents of the given file
229#
230sub display_file {
231    my $filename = $_[0];
232    print "=== Start of file $filename\n";
233    if(open(DISPLAYFH, "<$filename")) {
234        while(my $line = <DISPLAYFH>) {
235            print "$line";
236        }
237        close DISPLAYFH;
238    }
239    print "=== End of file $filename\n";
240}
241
242
243#***************************************************************************
244# Display contents of the ssh daemon config file
245#
246sub display_sshdconfig {
247    display_file($sshdconfig);
248}
249
250
251#***************************************************************************
252# Display contents of the ssh client config file
253#
254sub display_sshconfig {
255    display_file($sshconfig);
256}
257
258
259#***************************************************************************
260# Display contents of the sftp client config file
261#
262sub display_sftpconfig {
263    display_file($sftpconfig);
264}
265
266
267#***************************************************************************
268# Display contents of the ssh daemon log file
269#
270sub display_sshdlog {
271    die "error: \$sshdlog uninitialized" if(not defined $sshdlog);
272    display_file($sshdlog);
273}
274
275
276#***************************************************************************
277# Display contents of the ssh client log file
278#
279sub display_sshlog {
280    die "error: \$sshlog uninitialized" if(not defined $sshlog);
281    display_file($sshlog);
282}
283
284
285#***************************************************************************
286# Display contents of the sftp client log file
287#
288sub display_sftplog {
289    die "error: \$sftplog uninitialized" if(not defined $sftplog);
290    display_file($sftplog);
291}
292
293
294#***************************************************************************
295# Find a file somewhere in the given path
296#
297sub find_file {
298    my $fn = $_[0];
299    shift;
300    my @path = @_;
301    foreach (@path) {
302        my $file = File::Spec->catfile($_, $fn);
303        if(-e $file && ! -d $file) {
304            return $file;
305        }
306    }
307}
308
309
310#***************************************************************************
311# Find an executable file somewhere in the given path
312#
313sub find_exe_file {
314    my $fn = $_[0];
315    shift;
316    my @path = @_;
317    my $xext = exe_ext();
318    foreach (@path) {
319        my $file = File::Spec->catfile($_, $fn);
320        if(-e $file && ! -d $file) {
321            return $file if(-x $file);
322            return $file if(($xext) && (lc($file) =~ /\Q$xext\E$/));
323        }
324    }
325}
326
327
328#***************************************************************************
329# Find a file in environment path or in our sftppath
330#
331sub find_file_spath {
332    my $filename = $_[0];
333    my @spath;
334    push(@spath, File::Spec->path());
335    push(@spath, @sftppath);
336    return find_file($filename, @spath);
337}
338
339
340#***************************************************************************
341# Find an executable file in environment path or in our httptlssrvpath
342#
343sub find_exe_file_hpath {
344    my $filename = $_[0];
345    my @hpath;
346    push(@hpath, File::Spec->path());
347    push(@hpath, @httptlssrvpath);
348    return find_exe_file($filename, @hpath);
349}
350
351
352#***************************************************************************
353# Find ssh daemon and return canonical filename
354#
355sub find_sshd {
356    return find_file_spath($sshdexe);
357}
358
359
360#***************************************************************************
361# Find ssh client and return canonical filename
362#
363sub find_ssh {
364    return find_file_spath($sshexe);
365}
366
367
368#***************************************************************************
369# Find sftp-server plugin and return canonical filename
370#
371sub find_sftpsrv {
372    return find_file_spath($sftpsrvexe);
373}
374
375
376#***************************************************************************
377# Find sftp client and return canonical filename
378#
379sub find_sftp {
380    return find_file_spath($sftpexe);
381}
382
383
384#***************************************************************************
385# Find ssh-keygen and return canonical filename
386#
387sub find_sshkeygen {
388    return find_file_spath($sshkeygenexe);
389}
390
391
392#***************************************************************************
393# Find httptlssrv (gnutls-serv) and return canonical filename
394#
395sub find_httptlssrv {
396    return find_exe_file_hpath($httptlssrvexe);
397}
398
399
400#***************************************************************************
401# Return version info for the given ssh client or server binaries
402#
403sub sshversioninfo {
404    my $sshbin = $_[0]; # canonical filename
405    my $major;
406    my $minor;
407    my $patch;
408    my $sshid;
409    my $versnum;
410    my $versstr;
411    my $error;
412
413    if(!$sshbin) {
414        $error = 'Error: Missing argument 1 for sshversioninfo()';
415    }
416    elsif(! -x $sshbin) {
417        $error = "Error: cannot read or execute $sshbin";
418    }
419    else {
420        my $cmd = ($sshbin =~ /$sshdexe$/) ? "$sshbin -?" : "$sshbin -V";
421        $error = "$cmd\n";
422        foreach my $tmpstr (qx($cmd 2>&1)) {
423            if($tmpstr =~ /OpenSSH[_-](\d+)\.(\d+)(\.(\d+))*/i) {
424                $major = $1;
425                $minor = $2;
426                $patch = $4?$4:0;
427                $sshid = 'OpenSSH';
428                $versnum = (100*$major) + (10*$minor) + $patch;
429                $versstr = "$sshid $major.$minor.$patch";
430                $error = undef;
431                last;
432            }
433            if($tmpstr =~ /Sun[_-]SSH[_-](\d+)\.(\d+)(\.(\d+))*/i) {
434                $major = $1;
435                $minor = $2;
436                $patch = $4?$4:0;
437                $sshid = 'SunSSH';
438                $versnum = (100*$major) + (10*$minor) + $patch;
439                $versstr = "$sshid $major.$minor.$patch";
440                $error = undef;
441                last;
442            }
443            $error .= $tmpstr;
444        }
445        chomp $error if($error);
446    }
447    return ($sshid, $versnum, $versstr, $error);
448}
449
450
451#***************************************************************************
452# End of library
4531;
454
455