1/* MMIX-specific support for 64-bit ELF. 2 Copyright 2001, 2002, 2003, 2004, 2005, 2006 3 Free Software Foundation, Inc. 4 Contributed by Hans-Peter Nilsson <hp@bitrange.com> 5 6This file is part of BFD, the Binary File Descriptor library. 7 8This program is free software; you can redistribute it and/or modify 9it under the terms of the GNU General Public License as published by 10the Free Software Foundation; either version 2 of the License, or 11(at your option) any later version. 12 13This program is distributed in the hope that it will be useful, 14but WITHOUT ANY WARRANTY; without even the implied warranty of 15MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16GNU General Public License for more details. 17 18You should have received a copy of the GNU General Public License 19along with this program; if not, write to the Free Software 20Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ 21 22/* No specific ABI or "processor-specific supplement" defined. */ 23 24/* TODO: 25 - "Traditional" linker relaxation (shrinking whole sections). 26 - Merge reloc stubs jumping to same location. 27 - GETA stub relaxation (call a stub for out of range new 28 R_MMIX_GETA_STUBBABLE). */ 29 30#include "bfd.h" 31#include "sysdep.h" 32#include "libbfd.h" 33#include "elf-bfd.h" 34#include "elf/mmix.h" 35#include "opcode/mmix.h" 36 37#define MINUS_ONE (((bfd_vma) 0) - 1) 38 39#define MAX_PUSHJ_STUB_SIZE (5 * 4) 40 41/* Put these everywhere in new code. */ 42#define FATAL_DEBUG \ 43 _bfd_abort (__FILE__, __LINE__, \ 44 "Internal: Non-debugged code (test-case missing)") 45 46#define BAD_CASE(x) \ 47 _bfd_abort (__FILE__, __LINE__, \ 48 "bad case for " #x) 49 50struct _mmix_elf_section_data 51{ 52 struct bfd_elf_section_data elf; 53 union 54 { 55 struct bpo_reloc_section_info *reloc; 56 struct bpo_greg_section_info *greg; 57 } bpo; 58 59 struct pushj_stub_info 60 { 61 /* Maximum number of stubs needed for this section. */ 62 bfd_size_type n_pushj_relocs; 63 64 /* Size of stubs after a mmix_elf_relax_section round. */ 65 bfd_size_type stubs_size_sum; 66 67 /* Per-reloc stubs_size_sum information. The stubs_size_sum member is the sum 68 of these. Allocated in mmix_elf_check_common_relocs. */ 69 bfd_size_type *stub_size; 70 71 /* Offset of next stub during relocation. Somewhat redundant with the 72 above: error coverage is easier and we don't have to reset the 73 stubs_size_sum for relocation. */ 74 bfd_size_type stub_offset; 75 } pjs; 76}; 77 78#define mmix_elf_section_data(sec) \ 79 ((struct _mmix_elf_section_data *) elf_section_data (sec)) 80 81/* For each section containing a base-plus-offset (BPO) reloc, we attach 82 this struct as mmix_elf_section_data (section)->bpo, which is otherwise 83 NULL. */ 84struct bpo_reloc_section_info 85 { 86 /* The base is 1; this is the first number in this section. */ 87 size_t first_base_plus_offset_reloc; 88 89 /* Number of BPO-relocs in this section. */ 90 size_t n_bpo_relocs_this_section; 91 92 /* Running index, used at relocation time. */ 93 size_t bpo_index; 94 95 /* We don't have access to the bfd_link_info struct in 96 mmix_final_link_relocate. What we really want to get at is the 97 global single struct greg_relocation, so we stash it here. */ 98 asection *bpo_greg_section; 99 }; 100 101/* Helper struct (in global context) for the one below. 102 There's one of these created for every BPO reloc. */ 103struct bpo_reloc_request 104 { 105 bfd_vma value; 106 107 /* Valid after relaxation. The base is 0; the first register number 108 must be added. The offset is in range 0..255. */ 109 size_t regindex; 110 size_t offset; 111 112 /* The order number for this BPO reloc, corresponding to the order in 113 which BPO relocs were found. Used to create an index after reloc 114 requests are sorted. */ 115 size_t bpo_reloc_no; 116 117 /* Set when the value is computed. Better than coding "guard values" 118 into the other members. Is FALSE only for BPO relocs in a GC:ed 119 section. */ 120 bfd_boolean valid; 121 }; 122 123/* We attach this as mmix_elf_section_data (sec)->bpo in the linker-allocated 124 greg contents section (MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME), 125 which is linked into the register contents section 126 (MMIX_REG_CONTENTS_SECTION_NAME). This section is created by the 127 linker; using the same hook as for usual with BPO relocs does not 128 collide. */ 129struct bpo_greg_section_info 130 { 131 /* After GC, this reflects the number of remaining, non-excluded 132 BPO-relocs. */ 133 size_t n_bpo_relocs; 134 135 /* This is the number of allocated bpo_reloc_requests; the size of 136 sorted_indexes. Valid after the check.*relocs functions are called 137 for all incoming sections. It includes the number of BPO relocs in 138 sections that were GC:ed. */ 139 size_t n_max_bpo_relocs; 140 141 /* A counter used to find out when to fold the BPO gregs, since we 142 don't have a single "after-relaxation" hook. */ 143 size_t n_remaining_bpo_relocs_this_relaxation_round; 144 145 /* The number of linker-allocated GREGs resulting from BPO relocs. 146 This is an approximation after _bfd_mmix_before_linker_allocation 147 and supposedly accurate after mmix_elf_relax_section is called for 148 all incoming non-collected sections. */ 149 size_t n_allocated_bpo_gregs; 150 151 /* Index into reloc_request[], sorted on increasing "value", secondary 152 by increasing index for strict sorting order. */ 153 size_t *bpo_reloc_indexes; 154 155 /* An array of all relocations, with the "value" member filled in by 156 the relaxation function. */ 157 struct bpo_reloc_request *reloc_request; 158 }; 159 160static bfd_boolean mmix_elf_link_output_symbol_hook 161 PARAMS ((struct bfd_link_info *, const char *, Elf_Internal_Sym *, 162 asection *, struct elf_link_hash_entry *)); 163 164static bfd_reloc_status_type mmix_elf_reloc 165 PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **)); 166 167static reloc_howto_type *bfd_elf64_bfd_reloc_type_lookup 168 PARAMS ((bfd *, bfd_reloc_code_real_type)); 169 170static void mmix_info_to_howto_rela 171 PARAMS ((bfd *, arelent *, Elf_Internal_Rela *)); 172 173static int mmix_elf_sort_relocs PARAMS ((const PTR, const PTR)); 174 175static bfd_boolean mmix_elf_new_section_hook 176 PARAMS ((bfd *, asection *)); 177 178static bfd_boolean mmix_elf_check_relocs 179 PARAMS ((bfd *, struct bfd_link_info *, asection *, 180 const Elf_Internal_Rela *)); 181 182static bfd_boolean mmix_elf_check_common_relocs 183 PARAMS ((bfd *, struct bfd_link_info *, asection *, 184 const Elf_Internal_Rela *)); 185 186static bfd_boolean mmix_elf_relocate_section 187 PARAMS ((bfd *, struct bfd_link_info *, bfd *, asection *, bfd_byte *, 188 Elf_Internal_Rela *, Elf_Internal_Sym *, asection **)); 189 190static bfd_reloc_status_type mmix_final_link_relocate 191 PARAMS ((reloc_howto_type *, asection *, bfd_byte *, 192 bfd_vma, bfd_signed_vma, bfd_vma, const char *, asection *)); 193 194static bfd_reloc_status_type mmix_elf_perform_relocation 195 PARAMS ((asection *, reloc_howto_type *, PTR, bfd_vma, bfd_vma)); 196 197static bfd_boolean mmix_elf_section_from_bfd_section 198 PARAMS ((bfd *, asection *, int *)); 199 200static bfd_boolean mmix_elf_add_symbol_hook 201 PARAMS ((bfd *, struct bfd_link_info *, Elf_Internal_Sym *, 202 const char **, flagword *, asection **, bfd_vma *)); 203 204static bfd_boolean mmix_elf_is_local_label_name 205 PARAMS ((bfd *, const char *)); 206 207static int bpo_reloc_request_sort_fn PARAMS ((const PTR, const PTR)); 208 209static bfd_boolean mmix_elf_relax_section 210 PARAMS ((bfd *abfd, asection *sec, struct bfd_link_info *link_info, 211 bfd_boolean *again)); 212 213extern bfd_boolean mmix_elf_final_link PARAMS ((bfd *, struct bfd_link_info *)); 214 215extern void mmix_elf_symbol_processing PARAMS ((bfd *, asymbol *)); 216 217/* Only intended to be called from a debugger. */ 218extern void mmix_dump_bpo_gregs 219 PARAMS ((struct bfd_link_info *, bfd_error_handler_type)); 220 221static void 222mmix_set_relaxable_size 223 PARAMS ((bfd *, asection *, void *)); 224 225 226/* Watch out: this currently needs to have elements with the same index as 227 their R_MMIX_ number. */ 228static reloc_howto_type elf_mmix_howto_table[] = 229 { 230 /* This reloc does nothing. */ 231 HOWTO (R_MMIX_NONE, /* type */ 232 0, /* rightshift */ 233 2, /* size (0 = byte, 1 = short, 2 = long) */ 234 32, /* bitsize */ 235 FALSE, /* pc_relative */ 236 0, /* bitpos */ 237 complain_overflow_bitfield, /* complain_on_overflow */ 238 bfd_elf_generic_reloc, /* special_function */ 239 "R_MMIX_NONE", /* name */ 240 FALSE, /* partial_inplace */ 241 0, /* src_mask */ 242 0, /* dst_mask */ 243 FALSE), /* pcrel_offset */ 244 245 /* An 8 bit absolute relocation. */ 246 HOWTO (R_MMIX_8, /* type */ 247 0, /* rightshift */ 248 0, /* size (0 = byte, 1 = short, 2 = long) */ 249 8, /* bitsize */ 250 FALSE, /* pc_relative */ 251 0, /* bitpos */ 252 complain_overflow_bitfield, /* complain_on_overflow */ 253 bfd_elf_generic_reloc, /* special_function */ 254 "R_MMIX_8", /* name */ 255 FALSE, /* partial_inplace */ 256 0, /* src_mask */ 257 0xff, /* dst_mask */ 258 FALSE), /* pcrel_offset */ 259 260 /* An 16 bit absolute relocation. */ 261 HOWTO (R_MMIX_16, /* type */ 262 0, /* rightshift */ 263 1, /* size (0 = byte, 1 = short, 2 = long) */ 264 16, /* bitsize */ 265 FALSE, /* pc_relative */ 266 0, /* bitpos */ 267 complain_overflow_bitfield, /* complain_on_overflow */ 268 bfd_elf_generic_reloc, /* special_function */ 269 "R_MMIX_16", /* name */ 270 FALSE, /* partial_inplace */ 271 0, /* src_mask */ 272 0xffff, /* dst_mask */ 273 FALSE), /* pcrel_offset */ 274 275 /* An 24 bit absolute relocation. */ 276 HOWTO (R_MMIX_24, /* type */ 277 0, /* rightshift */ 278 2, /* size (0 = byte, 1 = short, 2 = long) */ 279 24, /* bitsize */ 280 FALSE, /* pc_relative */ 281 0, /* bitpos */ 282 complain_overflow_bitfield, /* complain_on_overflow */ 283 bfd_elf_generic_reloc, /* special_function */ 284 "R_MMIX_24", /* name */ 285 FALSE, /* partial_inplace */ 286 ~0xffffff, /* src_mask */ 287 0xffffff, /* dst_mask */ 288 FALSE), /* pcrel_offset */ 289 290 /* A 32 bit absolute relocation. */ 291 HOWTO (R_MMIX_32, /* type */ 292 0, /* rightshift */ 293 2, /* size (0 = byte, 1 = short, 2 = long) */ 294 32, /* bitsize */ 295 FALSE, /* pc_relative */ 296 0, /* bitpos */ 297 complain_overflow_bitfield, /* complain_on_overflow */ 298 bfd_elf_generic_reloc, /* special_function */ 299 "R_MMIX_32", /* name */ 300 FALSE, /* partial_inplace */ 301 0, /* src_mask */ 302 0xffffffff, /* dst_mask */ 303 FALSE), /* pcrel_offset */ 304 305 /* 64 bit relocation. */ 306 HOWTO (R_MMIX_64, /* type */ 307 0, /* rightshift */ 308 4, /* size (0 = byte, 1 = short, 2 = long) */ 309 64, /* bitsize */ 310 FALSE, /* pc_relative */ 311 0, /* bitpos */ 312 complain_overflow_bitfield, /* complain_on_overflow */ 313 bfd_elf_generic_reloc, /* special_function */ 314 "R_MMIX_64", /* name */ 315 FALSE, /* partial_inplace */ 316 0, /* src_mask */ 317 MINUS_ONE, /* dst_mask */ 318 FALSE), /* pcrel_offset */ 319 320 /* An 8 bit PC-relative relocation. */ 321 HOWTO (R_MMIX_PC_8, /* type */ 322 0, /* rightshift */ 323 0, /* size (0 = byte, 1 = short, 2 = long) */ 324 8, /* bitsize */ 325 TRUE, /* pc_relative */ 326 0, /* bitpos */ 327 complain_overflow_bitfield, /* complain_on_overflow */ 328 bfd_elf_generic_reloc, /* special_function */ 329 "R_MMIX_PC_8", /* name */ 330 FALSE, /* partial_inplace */ 331 0, /* src_mask */ 332 0xff, /* dst_mask */ 333 TRUE), /* pcrel_offset */ 334 335 /* An 16 bit PC-relative relocation. */ 336 HOWTO (R_MMIX_PC_16, /* type */ 337 0, /* rightshift */ 338 1, /* size (0 = byte, 1 = short, 2 = long) */ 339 16, /* bitsize */ 340 TRUE, /* pc_relative */ 341 0, /* bitpos */ 342 complain_overflow_bitfield, /* complain_on_overflow */ 343 bfd_elf_generic_reloc, /* special_function */ 344 "R_MMIX_PC_16", /* name */ 345 FALSE, /* partial_inplace */ 346 0, /* src_mask */ 347 0xffff, /* dst_mask */ 348 TRUE), /* pcrel_offset */ 349 350 /* An 24 bit PC-relative relocation. */ 351 HOWTO (R_MMIX_PC_24, /* type */ 352 0, /* rightshift */ 353 2, /* size (0 = byte, 1 = short, 2 = long) */ 354 24, /* bitsize */ 355 TRUE, /* pc_relative */ 356 0, /* bitpos */ 357 complain_overflow_bitfield, /* complain_on_overflow */ 358 bfd_elf_generic_reloc, /* special_function */ 359 "R_MMIX_PC_24", /* name */ 360 FALSE, /* partial_inplace */ 361 ~0xffffff, /* src_mask */ 362 0xffffff, /* dst_mask */ 363 TRUE), /* pcrel_offset */ 364 365 /* A 32 bit absolute PC-relative relocation. */ 366 HOWTO (R_MMIX_PC_32, /* type */ 367 0, /* rightshift */ 368 2, /* size (0 = byte, 1 = short, 2 = long) */ 369 32, /* bitsize */ 370 TRUE, /* pc_relative */ 371 0, /* bitpos */ 372 complain_overflow_bitfield, /* complain_on_overflow */ 373 bfd_elf_generic_reloc, /* special_function */ 374 "R_MMIX_PC_32", /* name */ 375 FALSE, /* partial_inplace */ 376 0, /* src_mask */ 377 0xffffffff, /* dst_mask */ 378 TRUE), /* pcrel_offset */ 379 380 /* 64 bit PC-relative relocation. */ 381 HOWTO (R_MMIX_PC_64, /* type */ 382 0, /* rightshift */ 383 4, /* size (0 = byte, 1 = short, 2 = long) */ 384 64, /* bitsize */ 385 TRUE, /* pc_relative */ 386 0, /* bitpos */ 387 complain_overflow_bitfield, /* complain_on_overflow */ 388 bfd_elf_generic_reloc, /* special_function */ 389 "R_MMIX_PC_64", /* name */ 390 FALSE, /* partial_inplace */ 391 0, /* src_mask */ 392 MINUS_ONE, /* dst_mask */ 393 TRUE), /* pcrel_offset */ 394 395 /* GNU extension to record C++ vtable hierarchy. */ 396 HOWTO (R_MMIX_GNU_VTINHERIT, /* type */ 397 0, /* rightshift */ 398 0, /* size (0 = byte, 1 = short, 2 = long) */ 399 0, /* bitsize */ 400 FALSE, /* pc_relative */ 401 0, /* bitpos */ 402 complain_overflow_dont, /* complain_on_overflow */ 403 NULL, /* special_function */ 404 "R_MMIX_GNU_VTINHERIT", /* name */ 405 FALSE, /* partial_inplace */ 406 0, /* src_mask */ 407 0, /* dst_mask */ 408 TRUE), /* pcrel_offset */ 409 410 /* GNU extension to record C++ vtable member usage. */ 411 HOWTO (R_MMIX_GNU_VTENTRY, /* type */ 412 0, /* rightshift */ 413 0, /* size (0 = byte, 1 = short, 2 = long) */ 414 0, /* bitsize */ 415 FALSE, /* pc_relative */ 416 0, /* bitpos */ 417 complain_overflow_dont, /* complain_on_overflow */ 418 _bfd_elf_rel_vtable_reloc_fn, /* special_function */ 419 "R_MMIX_GNU_VTENTRY", /* name */ 420 FALSE, /* partial_inplace */ 421 0, /* src_mask */ 422 0, /* dst_mask */ 423 FALSE), /* pcrel_offset */ 424 425 /* The GETA relocation is supposed to get any address that could 426 possibly be reached by the GETA instruction. It can silently expand 427 to get a 64-bit operand, but will complain if any of the two least 428 significant bits are set. The howto members reflect a simple GETA. */ 429 HOWTO (R_MMIX_GETA, /* type */ 430 2, /* rightshift */ 431 2, /* size (0 = byte, 1 = short, 2 = long) */ 432 19, /* bitsize */ 433 TRUE, /* pc_relative */ 434 0, /* bitpos */ 435 complain_overflow_signed, /* complain_on_overflow */ 436 mmix_elf_reloc, /* special_function */ 437 "R_MMIX_GETA", /* name */ 438 FALSE, /* partial_inplace */ 439 ~0x0100ffff, /* src_mask */ 440 0x0100ffff, /* dst_mask */ 441 TRUE), /* pcrel_offset */ 442 443 HOWTO (R_MMIX_GETA_1, /* type */ 444 2, /* rightshift */ 445 2, /* size (0 = byte, 1 = short, 2 = long) */ 446 19, /* bitsize */ 447 TRUE, /* pc_relative */ 448 0, /* bitpos */ 449 complain_overflow_signed, /* complain_on_overflow */ 450 mmix_elf_reloc, /* special_function */ 451 "R_MMIX_GETA_1", /* name */ 452 FALSE, /* partial_inplace */ 453 ~0x0100ffff, /* src_mask */ 454 0x0100ffff, /* dst_mask */ 455 TRUE), /* pcrel_offset */ 456 457 HOWTO (R_MMIX_GETA_2, /* type */ 458 2, /* rightshift */ 459 2, /* size (0 = byte, 1 = short, 2 = long) */ 460 19, /* bitsize */ 461 TRUE, /* pc_relative */ 462 0, /* bitpos */ 463 complain_overflow_signed, /* complain_on_overflow */ 464 mmix_elf_reloc, /* special_function */ 465 "R_MMIX_GETA_2", /* name */ 466 FALSE, /* partial_inplace */ 467 ~0x0100ffff, /* src_mask */ 468 0x0100ffff, /* dst_mask */ 469 TRUE), /* pcrel_offset */ 470 471 HOWTO (R_MMIX_GETA_3, /* type */ 472 2, /* rightshift */ 473 2, /* size (0 = byte, 1 = short, 2 = long) */ 474 19, /* bitsize */ 475 TRUE, /* pc_relative */ 476 0, /* bitpos */ 477 complain_overflow_signed, /* complain_on_overflow */ 478 mmix_elf_reloc, /* special_function */ 479 "R_MMIX_GETA_3", /* name */ 480 FALSE, /* partial_inplace */ 481 ~0x0100ffff, /* src_mask */ 482 0x0100ffff, /* dst_mask */ 483 TRUE), /* pcrel_offset */ 484 485 /* The conditional branches are supposed to reach any (code) address. 486 It can silently expand to a 64-bit operand, but will emit an error if 487 any of the two least significant bits are set. The howto members 488 reflect a simple branch. */ 489 HOWTO (R_MMIX_CBRANCH, /* type */ 490 2, /* rightshift */ 491 2, /* size (0 = byte, 1 = short, 2 = long) */ 492 19, /* bitsize */ 493 TRUE, /* pc_relative */ 494 0, /* bitpos */ 495 complain_overflow_signed, /* complain_on_overflow */ 496 mmix_elf_reloc, /* special_function */ 497 "R_MMIX_CBRANCH", /* name */ 498 FALSE, /* partial_inplace */ 499 ~0x0100ffff, /* src_mask */ 500 0x0100ffff, /* dst_mask */ 501 TRUE), /* pcrel_offset */ 502 503 HOWTO (R_MMIX_CBRANCH_J, /* type */ 504 2, /* rightshift */ 505 2, /* size (0 = byte, 1 = short, 2 = long) */ 506 19, /* bitsize */ 507 TRUE, /* pc_relative */ 508 0, /* bitpos */ 509 complain_overflow_signed, /* complain_on_overflow */ 510 mmix_elf_reloc, /* special_function */ 511 "R_MMIX_CBRANCH_J", /* name */ 512 FALSE, /* partial_inplace */ 513 ~0x0100ffff, /* src_mask */ 514 0x0100ffff, /* dst_mask */ 515 TRUE), /* pcrel_offset */ 516 517 HOWTO (R_MMIX_CBRANCH_1, /* type */ 518 2, /* rightshift */ 519 2, /* size (0 = byte, 1 = short, 2 = long) */ 520 19, /* bitsize */ 521 TRUE, /* pc_relative */ 522 0, /* bitpos */ 523 complain_overflow_signed, /* complain_on_overflow */ 524 mmix_elf_reloc, /* special_function */ 525 "R_MMIX_CBRANCH_1", /* name */ 526 FALSE, /* partial_inplace */ 527 ~0x0100ffff, /* src_mask */ 528 0x0100ffff, /* dst_mask */ 529 TRUE), /* pcrel_offset */ 530 531 HOWTO (R_MMIX_CBRANCH_2, /* type */ 532 2, /* rightshift */ 533 2, /* size (0 = byte, 1 = short, 2 = long) */ 534 19, /* bitsize */ 535 TRUE, /* pc_relative */ 536 0, /* bitpos */ 537 complain_overflow_signed, /* complain_on_overflow */ 538 mmix_elf_reloc, /* special_function */ 539 "R_MMIX_CBRANCH_2", /* name */ 540 FALSE, /* partial_inplace */ 541 ~0x0100ffff, /* src_mask */ 542 0x0100ffff, /* dst_mask */ 543 TRUE), /* pcrel_offset */ 544 545 HOWTO (R_MMIX_CBRANCH_3, /* type */ 546 2, /* rightshift */ 547 2, /* size (0 = byte, 1 = short, 2 = long) */ 548 19, /* bitsize */ 549 TRUE, /* pc_relative */ 550 0, /* bitpos */ 551 complain_overflow_signed, /* complain_on_overflow */ 552 mmix_elf_reloc, /* special_function */ 553 "R_MMIX_CBRANCH_3", /* name */ 554 FALSE, /* partial_inplace */ 555 ~0x0100ffff, /* src_mask */ 556 0x0100ffff, /* dst_mask */ 557 TRUE), /* pcrel_offset */ 558 559 /* The PUSHJ instruction can reach any (code) address, as long as it's 560 the beginning of a function (no usable restriction). It can silently 561 expand to a 64-bit operand, but will emit an error if any of the two 562 least significant bits are set. It can also expand into a call to a 563 stub; see R_MMIX_PUSHJ_STUBBABLE. The howto members reflect a simple 564 PUSHJ. */ 565 HOWTO (R_MMIX_PUSHJ, /* type */ 566 2, /* rightshift */ 567 2, /* size (0 = byte, 1 = short, 2 = long) */ 568 19, /* bitsize */ 569 TRUE, /* pc_relative */ 570 0, /* bitpos */ 571 complain_overflow_signed, /* complain_on_overflow */ 572 mmix_elf_reloc, /* special_function */ 573 "R_MMIX_PUSHJ", /* name */ 574 FALSE, /* partial_inplace */ 575 ~0x0100ffff, /* src_mask */ 576 0x0100ffff, /* dst_mask */ 577 TRUE), /* pcrel_offset */ 578 579 HOWTO (R_MMIX_PUSHJ_1, /* type */ 580 2, /* rightshift */ 581 2, /* size (0 = byte, 1 = short, 2 = long) */ 582 19, /* bitsize */ 583 TRUE, /* pc_relative */ 584 0, /* bitpos */ 585 complain_overflow_signed, /* complain_on_overflow */ 586 mmix_elf_reloc, /* special_function */ 587 "R_MMIX_PUSHJ_1", /* name */ 588 FALSE, /* partial_inplace */ 589 ~0x0100ffff, /* src_mask */ 590 0x0100ffff, /* dst_mask */ 591 TRUE), /* pcrel_offset */ 592 593 HOWTO (R_MMIX_PUSHJ_2, /* type */ 594 2, /* rightshift */ 595 2, /* size (0 = byte, 1 = short, 2 = long) */ 596 19, /* bitsize */ 597 TRUE, /* pc_relative */ 598 0, /* bitpos */ 599 complain_overflow_signed, /* complain_on_overflow */ 600 mmix_elf_reloc, /* special_function */ 601 "R_MMIX_PUSHJ_2", /* name */ 602 FALSE, /* partial_inplace */ 603 ~0x0100ffff, /* src_mask */ 604 0x0100ffff, /* dst_mask */ 605 TRUE), /* pcrel_offset */ 606 607 HOWTO (R_MMIX_PUSHJ_3, /* type */ 608 2, /* rightshift */ 609 2, /* size (0 = byte, 1 = short, 2 = long) */ 610 19, /* bitsize */ 611 TRUE, /* pc_relative */ 612 0, /* bitpos */ 613 complain_overflow_signed, /* complain_on_overflow */ 614 mmix_elf_reloc, /* special_function */ 615 "R_MMIX_PUSHJ_3", /* name */ 616 FALSE, /* partial_inplace */ 617 ~0x0100ffff, /* src_mask */ 618 0x0100ffff, /* dst_mask */ 619 TRUE), /* pcrel_offset */ 620 621 /* A JMP is supposed to reach any (code) address. By itself, it can 622 reach +-64M; the expansion can reach all 64 bits. Note that the 64M 623 limit is soon reached if you link the program in wildly different 624 memory segments. The howto members reflect a trivial JMP. */ 625 HOWTO (R_MMIX_JMP, /* type */ 626 2, /* rightshift */ 627 2, /* size (0 = byte, 1 = short, 2 = long) */ 628 27, /* bitsize */ 629 TRUE, /* pc_relative */ 630 0, /* bitpos */ 631 complain_overflow_signed, /* complain_on_overflow */ 632 mmix_elf_reloc, /* special_function */ 633 "R_MMIX_JMP", /* name */ 634 FALSE, /* partial_inplace */ 635 ~0x1ffffff, /* src_mask */ 636 0x1ffffff, /* dst_mask */ 637 TRUE), /* pcrel_offset */ 638 639 HOWTO (R_MMIX_JMP_1, /* type */ 640 2, /* rightshift */ 641 2, /* size (0 = byte, 1 = short, 2 = long) */ 642 27, /* bitsize */ 643 TRUE, /* pc_relative */ 644 0, /* bitpos */ 645 complain_overflow_signed, /* complain_on_overflow */ 646 mmix_elf_reloc, /* special_function */ 647 "R_MMIX_JMP_1", /* name */ 648 FALSE, /* partial_inplace */ 649 ~0x1ffffff, /* src_mask */ 650 0x1ffffff, /* dst_mask */ 651 TRUE), /* pcrel_offset */ 652 653 HOWTO (R_MMIX_JMP_2, /* type */ 654 2, /* rightshift */ 655 2, /* size (0 = byte, 1 = short, 2 = long) */ 656 27, /* bitsize */ 657 TRUE, /* pc_relative */ 658 0, /* bitpos */ 659 complain_overflow_signed, /* complain_on_overflow */ 660 mmix_elf_reloc, /* special_function */ 661 "R_MMIX_JMP_2", /* name */ 662 FALSE, /* partial_inplace */ 663 ~0x1ffffff, /* src_mask */ 664 0x1ffffff, /* dst_mask */ 665 TRUE), /* pcrel_offset */ 666 667 HOWTO (R_MMIX_JMP_3, /* type */ 668 2, /* rightshift */ 669 2, /* size (0 = byte, 1 = short, 2 = long) */ 670 27, /* bitsize */ 671 TRUE, /* pc_relative */ 672 0, /* bitpos */ 673 complain_overflow_signed, /* complain_on_overflow */ 674 mmix_elf_reloc, /* special_function */ 675 "R_MMIX_JMP_3", /* name */ 676 FALSE, /* partial_inplace */ 677 ~0x1ffffff, /* src_mask */ 678 0x1ffffff, /* dst_mask */ 679 TRUE), /* pcrel_offset */ 680 681 /* When we don't emit link-time-relaxable code from the assembler, or 682 when relaxation has done all it can do, these relocs are used. For 683 GETA/PUSHJ/branches. */ 684 HOWTO (R_MMIX_ADDR19, /* type */ 685 2, /* rightshift */ 686 2, /* size (0 = byte, 1 = short, 2 = long) */ 687 19, /* bitsize */ 688 TRUE, /* pc_relative */ 689 0, /* bitpos */ 690 complain_overflow_signed, /* complain_on_overflow */ 691 mmix_elf_reloc, /* special_function */ 692 "R_MMIX_ADDR19", /* name */ 693 FALSE, /* partial_inplace */ 694 ~0x0100ffff, /* src_mask */ 695 0x0100ffff, /* dst_mask */ 696 TRUE), /* pcrel_offset */ 697 698 /* For JMP. */ 699 HOWTO (R_MMIX_ADDR27, /* type */ 700 2, /* rightshift */ 701 2, /* size (0 = byte, 1 = short, 2 = long) */ 702 27, /* bitsize */ 703 TRUE, /* pc_relative */ 704 0, /* bitpos */ 705 complain_overflow_signed, /* complain_on_overflow */ 706 mmix_elf_reloc, /* special_function */ 707 "R_MMIX_ADDR27", /* name */ 708 FALSE, /* partial_inplace */ 709 ~0x1ffffff, /* src_mask */ 710 0x1ffffff, /* dst_mask */ 711 TRUE), /* pcrel_offset */ 712 713 /* A general register or the value 0..255. If a value, then the 714 instruction (offset -3) needs adjusting. */ 715 HOWTO (R_MMIX_REG_OR_BYTE, /* type */ 716 0, /* rightshift */ 717 1, /* size (0 = byte, 1 = short, 2 = long) */ 718 8, /* bitsize */ 719 FALSE, /* pc_relative */ 720 0, /* bitpos */ 721 complain_overflow_bitfield, /* complain_on_overflow */ 722 mmix_elf_reloc, /* special_function */ 723 "R_MMIX_REG_OR_BYTE", /* name */ 724 FALSE, /* partial_inplace */ 725 0, /* src_mask */ 726 0xff, /* dst_mask */ 727 FALSE), /* pcrel_offset */ 728 729 /* A general register. */ 730 HOWTO (R_MMIX_REG, /* type */ 731 0, /* rightshift */ 732 1, /* size (0 = byte, 1 = short, 2 = long) */ 733 8, /* bitsize */ 734 FALSE, /* pc_relative */ 735 0, /* bitpos */ 736 complain_overflow_bitfield, /* complain_on_overflow */ 737 mmix_elf_reloc, /* special_function */ 738 "R_MMIX_REG", /* name */ 739 FALSE, /* partial_inplace */ 740 0, /* src_mask */ 741 0xff, /* dst_mask */ 742 FALSE), /* pcrel_offset */ 743 744 /* A register plus an index, corresponding to the relocation expression. 745 The sizes must correspond to the valid range of the expression, while 746 the bitmasks correspond to what we store in the image. */ 747 HOWTO (R_MMIX_BASE_PLUS_OFFSET, /* type */ 748 0, /* rightshift */ 749 4, /* size (0 = byte, 1 = short, 2 = long) */ 750 64, /* bitsize */ 751 FALSE, /* pc_relative */ 752 0, /* bitpos */ 753 complain_overflow_bitfield, /* complain_on_overflow */ 754 mmix_elf_reloc, /* special_function */ 755 "R_MMIX_BASE_PLUS_OFFSET", /* name */ 756 FALSE, /* partial_inplace */ 757 0, /* src_mask */ 758 0xffff, /* dst_mask */ 759 FALSE), /* pcrel_offset */ 760 761 /* A "magic" relocation for a LOCAL expression, asserting that the 762 expression is less than the number of global registers. No actual 763 modification of the contents is done. Implementing this as a 764 relocation was less intrusive than e.g. putting such expressions in a 765 section to discard *after* relocation. */ 766 HOWTO (R_MMIX_LOCAL, /* type */ 767 0, /* rightshift */ 768 0, /* size (0 = byte, 1 = short, 2 = long) */ 769 0, /* bitsize */ 770 FALSE, /* pc_relative */ 771 0, /* bitpos */ 772 complain_overflow_dont, /* complain_on_overflow */ 773 mmix_elf_reloc, /* special_function */ 774 "R_MMIX_LOCAL", /* name */ 775 FALSE, /* partial_inplace */ 776 0, /* src_mask */ 777 0, /* dst_mask */ 778 FALSE), /* pcrel_offset */ 779 780 HOWTO (R_MMIX_PUSHJ_STUBBABLE, /* type */ 781 2, /* rightshift */ 782 2, /* size (0 = byte, 1 = short, 2 = long) */ 783 19, /* bitsize */ 784 TRUE, /* pc_relative */ 785 0, /* bitpos */ 786 complain_overflow_signed, /* complain_on_overflow */ 787 mmix_elf_reloc, /* special_function */ 788 "R_MMIX_PUSHJ_STUBBABLE", /* name */ 789 FALSE, /* partial_inplace */ 790 ~0x0100ffff, /* src_mask */ 791 0x0100ffff, /* dst_mask */ 792 TRUE) /* pcrel_offset */ 793 }; 794 795 796/* Map BFD reloc types to MMIX ELF reloc types. */ 797 798struct mmix_reloc_map 799 { 800 bfd_reloc_code_real_type bfd_reloc_val; 801 enum elf_mmix_reloc_type elf_reloc_val; 802 }; 803 804 805static const struct mmix_reloc_map mmix_reloc_map[] = 806 { 807 {BFD_RELOC_NONE, R_MMIX_NONE}, 808 {BFD_RELOC_8, R_MMIX_8}, 809 {BFD_RELOC_16, R_MMIX_16}, 810 {BFD_RELOC_24, R_MMIX_24}, 811 {BFD_RELOC_32, R_MMIX_32}, 812 {BFD_RELOC_64, R_MMIX_64}, 813 {BFD_RELOC_8_PCREL, R_MMIX_PC_8}, 814 {BFD_RELOC_16_PCREL, R_MMIX_PC_16}, 815 {BFD_RELOC_24_PCREL, R_MMIX_PC_24}, 816 {BFD_RELOC_32_PCREL, R_MMIX_PC_32}, 817 {BFD_RELOC_64_PCREL, R_MMIX_PC_64}, 818 {BFD_RELOC_VTABLE_INHERIT, R_MMIX_GNU_VTINHERIT}, 819 {BFD_RELOC_VTABLE_ENTRY, R_MMIX_GNU_VTENTRY}, 820 {BFD_RELOC_MMIX_GETA, R_MMIX_GETA}, 821 {BFD_RELOC_MMIX_CBRANCH, R_MMIX_CBRANCH}, 822 {BFD_RELOC_MMIX_PUSHJ, R_MMIX_PUSHJ}, 823 {BFD_RELOC_MMIX_JMP, R_MMIX_JMP}, 824 {BFD_RELOC_MMIX_ADDR19, R_MMIX_ADDR19}, 825 {BFD_RELOC_MMIX_ADDR27, R_MMIX_ADDR27}, 826 {BFD_RELOC_MMIX_REG_OR_BYTE, R_MMIX_REG_OR_BYTE}, 827 {BFD_RELOC_MMIX_REG, R_MMIX_REG}, 828 {BFD_RELOC_MMIX_BASE_PLUS_OFFSET, R_MMIX_BASE_PLUS_OFFSET}, 829 {BFD_RELOC_MMIX_LOCAL, R_MMIX_LOCAL}, 830 {BFD_RELOC_MMIX_PUSHJ_STUBBABLE, R_MMIX_PUSHJ_STUBBABLE} 831 }; 832 833static reloc_howto_type * 834bfd_elf64_bfd_reloc_type_lookup (abfd, code) 835 bfd *abfd ATTRIBUTE_UNUSED; 836 bfd_reloc_code_real_type code; 837{ 838 unsigned int i; 839 840 for (i = 0; 841 i < sizeof (mmix_reloc_map) / sizeof (mmix_reloc_map[0]); 842 i++) 843 { 844 if (mmix_reloc_map[i].bfd_reloc_val == code) 845 return &elf_mmix_howto_table[mmix_reloc_map[i].elf_reloc_val]; 846 } 847 848 return NULL; 849} 850 851static bfd_boolean 852mmix_elf_new_section_hook (abfd, sec) 853 bfd *abfd; 854 asection *sec; 855{ 856 if (!sec->used_by_bfd) 857 { 858 struct _mmix_elf_section_data *sdata; 859 bfd_size_type amt = sizeof (*sdata); 860 861 sdata = bfd_zalloc (abfd, amt); 862 if (sdata == NULL) 863 return FALSE; 864 sec->used_by_bfd = sdata; 865 } 866 867 return _bfd_elf_new_section_hook (abfd, sec); 868} 869 870 871/* This function performs the actual bitfiddling and sanity check for a 872 final relocation. Each relocation gets its *worst*-case expansion 873 in size when it arrives here; any reduction in size should have been 874 caught in linker relaxation earlier. When we get here, the relocation 875 looks like the smallest instruction with SWYM:s (nop:s) appended to the 876 max size. We fill in those nop:s. 877 878 R_MMIX_GETA: (FIXME: Relaxation should break this up in 1, 2, 3 tetra) 879 GETA $N,foo 880 -> 881 SETL $N,foo & 0xffff 882 INCML $N,(foo >> 16) & 0xffff 883 INCMH $N,(foo >> 32) & 0xffff 884 INCH $N,(foo >> 48) & 0xffff 885 886 R_MMIX_CBRANCH: (FIXME: Relaxation should break this up, but 887 condbranches needing relaxation might be rare enough to not be 888 worthwhile.) 889 [P]Bcc $N,foo 890 -> 891 [~P]B~cc $N,.+20 892 SETL $255,foo & ... 893 INCML ... 894 INCMH ... 895 INCH ... 896 GO $255,$255,0 897 898 R_MMIX_PUSHJ: (FIXME: Relaxation...) 899 PUSHJ $N,foo 900 -> 901 SETL $255,foo & ... 902 INCML ... 903 INCMH ... 904 INCH ... 905 PUSHGO $N,$255,0 906 907 R_MMIX_JMP: (FIXME: Relaxation...) 908 JMP foo 909 -> 910 SETL $255,foo & ... 911 INCML ... 912 INCMH ... 913 INCH ... 914 GO $255,$255,0 915 916 R_MMIX_ADDR19 and R_MMIX_ADDR27 are just filled in. */ 917 918static bfd_reloc_status_type 919mmix_elf_perform_relocation (isec, howto, datap, addr, value) 920 asection *isec; 921 reloc_howto_type *howto; 922 PTR datap; 923 bfd_vma addr; 924 bfd_vma value; 925{ 926 bfd *abfd = isec->owner; 927 bfd_reloc_status_type flag = bfd_reloc_ok; 928 bfd_reloc_status_type r; 929 int offs = 0; 930 int reg = 255; 931 932 /* The worst case bits are all similar SETL/INCML/INCMH/INCH sequences. 933 We handle the differences here and the common sequence later. */ 934 switch (howto->type) 935 { 936 case R_MMIX_GETA: 937 offs = 0; 938 reg = bfd_get_8 (abfd, (bfd_byte *) datap + 1); 939 940 /* We change to an absolute value. */ 941 value += addr; 942 break; 943 944 case R_MMIX_CBRANCH: 945 { 946 int in1 = bfd_get_16 (abfd, (bfd_byte *) datap) << 16; 947 948 /* Invert the condition and prediction bit, and set the offset 949 to five instructions ahead. 950 951 We *can* do better if we want to. If the branch is found to be 952 within limits, we could leave the branch as is; there'll just 953 be a bunch of NOP:s after it. But we shouldn't see this 954 sequence often enough that it's worth doing it. */ 955 956 bfd_put_32 (abfd, 957 (((in1 ^ ((PRED_INV_BIT | COND_INV_BIT) << 24)) & ~0xffff) 958 | (24/4)), 959 (bfd_byte *) datap); 960 961 /* Put a "GO $255,$255,0" after the common sequence. */ 962 bfd_put_32 (abfd, 963 ((GO_INSN_BYTE | IMM_OFFSET_BIT) << 24) | 0xffff00, 964 (bfd_byte *) datap + 20); 965 966 /* Common sequence starts at offset 4. */ 967 offs = 4; 968 969 /* We change to an absolute value. */ 970 value += addr; 971 } 972 break; 973 974 case R_MMIX_PUSHJ_STUBBABLE: 975 /* If the address fits, we're fine. */ 976 if ((value & 3) == 0 977 /* Note rightshift 0; see R_MMIX_JMP case below. */ 978 && (r = bfd_check_overflow (complain_overflow_signed, 979 howto->bitsize, 980 0, 981 bfd_arch_bits_per_address (abfd), 982 value)) == bfd_reloc_ok) 983 goto pcrel_mmix_reloc_fits; 984 else 985 { 986 bfd_size_type size = isec->rawsize ? isec->rawsize : isec->size; 987 988 /* We have the bytes at the PUSHJ insn and need to get the 989 position for the stub. There's supposed to be room allocated 990 for the stub. */ 991 bfd_byte *stubcontents 992 = ((bfd_byte *) datap 993 - (addr - (isec->output_section->vma + isec->output_offset)) 994 + size 995 + mmix_elf_section_data (isec)->pjs.stub_offset); 996 bfd_vma stubaddr; 997 998 /* The address doesn't fit, so redirect the PUSHJ to the 999 location of the stub. */ 1000 r = mmix_elf_perform_relocation (isec, 1001 &elf_mmix_howto_table 1002 [R_MMIX_ADDR19], 1003 datap, 1004 addr, 1005 isec->output_section->vma 1006 + isec->output_offset 1007 + size 1008 + (mmix_elf_section_data (isec) 1009 ->pjs.stub_offset) 1010 - addr); 1011 if (r != bfd_reloc_ok) 1012 return r; 1013 1014 stubaddr 1015 = (isec->output_section->vma 1016 + isec->output_offset 1017 + size 1018 + mmix_elf_section_data (isec)->pjs.stub_offset); 1019 1020 /* We generate a simple JMP if that suffices, else the whole 5 1021 insn stub. */ 1022 if (bfd_check_overflow (complain_overflow_signed, 1023 elf_mmix_howto_table[R_MMIX_ADDR27].bitsize, 1024 0, 1025 bfd_arch_bits_per_address (abfd), 1026 addr + value - stubaddr) == bfd_reloc_ok) 1027 { 1028 bfd_put_32 (abfd, JMP_INSN_BYTE << 24, stubcontents); 1029 r = mmix_elf_perform_relocation (isec, 1030 &elf_mmix_howto_table 1031 [R_MMIX_ADDR27], 1032 stubcontents, 1033 stubaddr, 1034 value + addr - stubaddr); 1035 mmix_elf_section_data (isec)->pjs.stub_offset += 4; 1036 1037 if (size + mmix_elf_section_data (isec)->pjs.stub_offset 1038 > isec->size) 1039 abort (); 1040 1041 return r; 1042 } 1043 else 1044 { 1045 /* Put a "GO $255,0" after the common sequence. */ 1046 bfd_put_32 (abfd, 1047 ((GO_INSN_BYTE | IMM_OFFSET_BIT) << 24) 1048 | 0xff00, (bfd_byte *) stubcontents + 16); 1049 1050 /* Prepare for the general code to set the first part of the 1051 linker stub, and */ 1052 value += addr; 1053 datap = stubcontents; 1054 mmix_elf_section_data (isec)->pjs.stub_offset 1055 += MAX_PUSHJ_STUB_SIZE; 1056 } 1057 } 1058 break; 1059 1060 case R_MMIX_PUSHJ: 1061 { 1062 int inreg = bfd_get_8 (abfd, (bfd_byte *) datap + 1); 1063 1064 /* Put a "PUSHGO $N,$255,0" after the common sequence. */ 1065 bfd_put_32 (abfd, 1066 ((PUSHGO_INSN_BYTE | IMM_OFFSET_BIT) << 24) 1067 | (inreg << 16) 1068 | 0xff00, 1069 (bfd_byte *) datap + 16); 1070 1071 /* We change to an absolute value. */ 1072 value += addr; 1073 } 1074 break; 1075 1076 case R_MMIX_JMP: 1077 /* This one is a little special. If we get here on a non-relaxing 1078 link, and the destination is actually in range, we don't need to 1079 execute the nops. 1080 If so, we fall through to the bit-fiddling relocs. 1081 1082 FIXME: bfd_check_overflow seems broken; the relocation is 1083 rightshifted before testing, so supply a zero rightshift. */ 1084 1085 if (! ((value & 3) == 0 1086 && (r = bfd_check_overflow (complain_overflow_signed, 1087 howto->bitsize, 1088 0, 1089 bfd_arch_bits_per_address (abfd), 1090 value)) == bfd_reloc_ok)) 1091 { 1092 /* If the relocation doesn't fit in a JMP, we let the NOP:s be 1093 modified below, and put a "GO $255,$255,0" after the 1094 address-loading sequence. */ 1095 bfd_put_32 (abfd, 1096 ((GO_INSN_BYTE | IMM_OFFSET_BIT) << 24) 1097 | 0xffff00, 1098 (bfd_byte *) datap + 16); 1099 1100 /* We change to an absolute value. */ 1101 value += addr; 1102 break; 1103 } 1104 /* FALLTHROUGH. */ 1105 case R_MMIX_ADDR19: 1106 case R_MMIX_ADDR27: 1107 pcrel_mmix_reloc_fits: 1108 /* These must be in range, or else we emit an error. */ 1109 if ((value & 3) == 0 1110 /* Note rightshift 0; see above. */ 1111 && (r = bfd_check_overflow (complain_overflow_signed, 1112 howto->bitsize, 1113 0, 1114 bfd_arch_bits_per_address (abfd), 1115 value)) == bfd_reloc_ok) 1116 { 1117 bfd_vma in1 1118 = bfd_get_32 (abfd, (bfd_byte *) datap); 1119 bfd_vma highbit; 1120 1121 if ((bfd_signed_vma) value < 0) 1122 { 1123 highbit = 1 << 24; 1124 value += (1 << (howto->bitsize - 1)); 1125 } 1126 else 1127 highbit = 0; 1128 1129 value >>= 2; 1130 1131 bfd_put_32 (abfd, 1132 (in1 & howto->src_mask) 1133 | highbit 1134 | (value & howto->dst_mask), 1135 (bfd_byte *) datap); 1136 1137 return bfd_reloc_ok; 1138 } 1139 else 1140 return bfd_reloc_overflow; 1141 1142 case R_MMIX_BASE_PLUS_OFFSET: 1143 { 1144 struct bpo_reloc_section_info *bpodata 1145 = mmix_elf_section_data (isec)->bpo.reloc; 1146 asection *bpo_greg_section 1147 = bpodata->bpo_greg_section; 1148 struct bpo_greg_section_info *gregdata 1149 = mmix_elf_section_data (bpo_greg_section)->bpo.greg; 1150 size_t bpo_index 1151 = gregdata->bpo_reloc_indexes[bpodata->bpo_index++]; 1152 1153 /* A consistency check: The value we now have in "relocation" must 1154 be the same as the value we stored for that relocation. It 1155 doesn't cost much, so can be left in at all times. */ 1156 if (value != gregdata->reloc_request[bpo_index].value) 1157 { 1158 (*_bfd_error_handler) 1159 (_("%s: Internal inconsistency error for value for\n\ 1160 linker-allocated global register: linked: 0x%lx%08lx != relaxed: 0x%lx%08lx\n"), 1161 bfd_get_filename (isec->owner), 1162 (unsigned long) (value >> 32), (unsigned long) value, 1163 (unsigned long) (gregdata->reloc_request[bpo_index].value 1164 >> 32), 1165 (unsigned long) gregdata->reloc_request[bpo_index].value); 1166 bfd_set_error (bfd_error_bad_value); 1167 return bfd_reloc_overflow; 1168 } 1169 1170 /* Then store the register number and offset for that register 1171 into datap and datap + 1 respectively. */ 1172 bfd_put_8 (abfd, 1173 gregdata->reloc_request[bpo_index].regindex 1174 + bpo_greg_section->output_section->vma / 8, 1175 datap); 1176 bfd_put_8 (abfd, 1177 gregdata->reloc_request[bpo_index].offset, 1178 ((unsigned char *) datap) + 1); 1179 return bfd_reloc_ok; 1180 } 1181 1182 case R_MMIX_REG_OR_BYTE: 1183 case R_MMIX_REG: 1184 if (value > 255) 1185 return bfd_reloc_overflow; 1186 bfd_put_8 (abfd, value, datap); 1187 return bfd_reloc_ok; 1188 1189 default: 1190 BAD_CASE (howto->type); 1191 } 1192 1193 /* This code adds the common SETL/INCML/INCMH/INCH worst-case 1194 sequence. */ 1195 1196 /* Lowest two bits must be 0. We return bfd_reloc_overflow for 1197 everything that looks strange. */ 1198 if (value & 3) 1199 flag = bfd_reloc_overflow; 1200 1201 bfd_put_32 (abfd, 1202 (SETL_INSN_BYTE << 24) | (value & 0xffff) | (reg << 16), 1203 (bfd_byte *) datap + offs); 1204 bfd_put_32 (abfd, 1205 (INCML_INSN_BYTE << 24) | ((value >> 16) & 0xffff) | (reg << 16), 1206 (bfd_byte *) datap + offs + 4); 1207 bfd_put_32 (abfd, 1208 (INCMH_INSN_BYTE << 24) | ((value >> 32) & 0xffff) | (reg << 16), 1209 (bfd_byte *) datap + offs + 8); 1210 bfd_put_32 (abfd, 1211 (INCH_INSN_BYTE << 24) | ((value >> 48) & 0xffff) | (reg << 16), 1212 (bfd_byte *) datap + offs + 12); 1213 1214 return flag; 1215} 1216 1217/* Set the howto pointer for an MMIX ELF reloc (type RELA). */ 1218 1219static void 1220mmix_info_to_howto_rela (abfd, cache_ptr, dst) 1221 bfd *abfd ATTRIBUTE_UNUSED; 1222 arelent *cache_ptr; 1223 Elf_Internal_Rela *dst; 1224{ 1225 unsigned int r_type; 1226 1227 r_type = ELF64_R_TYPE (dst->r_info); 1228 BFD_ASSERT (r_type < (unsigned int) R_MMIX_max); 1229 cache_ptr->howto = &elf_mmix_howto_table[r_type]; 1230} 1231 1232/* Any MMIX-specific relocation gets here at assembly time or when linking 1233 to other formats (such as mmo); this is the relocation function from 1234 the reloc_table. We don't get here for final pure ELF linking. */ 1235 1236static bfd_reloc_status_type 1237mmix_elf_reloc (abfd, reloc_entry, symbol, data, input_section, 1238 output_bfd, error_message) 1239 bfd *abfd; 1240 arelent *reloc_entry; 1241 asymbol *symbol; 1242 PTR data; 1243 asection *input_section; 1244 bfd *output_bfd; 1245 char **error_message ATTRIBUTE_UNUSED; 1246{ 1247 bfd_vma relocation; 1248 bfd_reloc_status_type r; 1249 asection *reloc_target_output_section; 1250 bfd_reloc_status_type flag = bfd_reloc_ok; 1251 bfd_vma output_base = 0; 1252 bfd_vma addr; 1253 1254 r = bfd_elf_generic_reloc (abfd, reloc_entry, symbol, data, 1255 input_section, output_bfd, error_message); 1256 1257 /* If that was all that was needed (i.e. this isn't a final link, only 1258 some segment adjustments), we're done. */ 1259 if (r != bfd_reloc_continue) 1260 return r; 1261 1262 if (bfd_is_und_section (symbol->section) 1263 && (symbol->flags & BSF_WEAK) == 0 1264 && output_bfd == (bfd *) NULL) 1265 return bfd_reloc_undefined; 1266 1267 /* Is the address of the relocation really within the section? */ 1268 if (reloc_entry->address > bfd_get_section_limit (abfd, input_section)) 1269 return bfd_reloc_outofrange; 1270 1271 /* Work out which section the relocation is targeted at and the 1272 initial relocation command value. */ 1273 1274 /* Get symbol value. (Common symbols are special.) */ 1275 if (bfd_is_com_section (symbol->section)) 1276 relocation = 0; 1277 else 1278 relocation = symbol->value; 1279 1280 reloc_target_output_section = bfd_get_output_section (symbol); 1281 1282 /* Here the variable relocation holds the final address of the symbol we 1283 are relocating against, plus any addend. */ 1284 if (output_bfd) 1285 output_base = 0; 1286 else 1287 output_base = reloc_target_output_section->vma; 1288 1289 relocation += output_base + symbol->section->output_offset; 1290 1291 /* Get position of relocation. */ 1292 addr = (reloc_entry->address + input_section->output_section->vma 1293 + input_section->output_offset); 1294 if (output_bfd != (bfd *) NULL) 1295 { 1296 /* Add in supplied addend. */ 1297 relocation += reloc_entry->addend; 1298 1299 /* This is a partial relocation, and we want to apply the 1300 relocation to the reloc entry rather than the raw data. 1301 Modify the reloc inplace to reflect what we now know. */ 1302 reloc_entry->addend = relocation; 1303 reloc_entry->address += input_section->output_offset; 1304 return flag; 1305 } 1306 1307 return mmix_final_link_relocate (reloc_entry->howto, input_section, 1308 data, reloc_entry->address, 1309 reloc_entry->addend, relocation, 1310 bfd_asymbol_name (symbol), 1311 reloc_target_output_section); 1312} 1313 1314/* Relocate an MMIX ELF section. Modified from elf32-fr30.c; look to it 1315 for guidance if you're thinking of copying this. */ 1316 1317static bfd_boolean 1318mmix_elf_relocate_section (output_bfd, info, input_bfd, input_section, 1319 contents, relocs, local_syms, local_sections) 1320 bfd *output_bfd ATTRIBUTE_UNUSED; 1321 struct bfd_link_info *info; 1322 bfd *input_bfd; 1323 asection *input_section; 1324 bfd_byte *contents; 1325 Elf_Internal_Rela *relocs; 1326 Elf_Internal_Sym *local_syms; 1327 asection **local_sections; 1328{ 1329 Elf_Internal_Shdr *symtab_hdr; 1330 struct elf_link_hash_entry **sym_hashes; 1331 Elf_Internal_Rela *rel; 1332 Elf_Internal_Rela *relend; 1333 bfd_size_type size; 1334 size_t pjsno = 0; 1335 1336 size = input_section->rawsize ? input_section->rawsize : input_section->size; 1337 symtab_hdr = &elf_tdata (input_bfd)->symtab_hdr; 1338 sym_hashes = elf_sym_hashes (input_bfd); 1339 relend = relocs + input_section->reloc_count; 1340 1341 /* Zero the stub area before we start. */ 1342 if (input_section->rawsize != 0 1343 && input_section->size > input_section->rawsize) 1344 memset (contents + input_section->rawsize, 0, 1345 input_section->size - input_section->rawsize); 1346 1347 for (rel = relocs; rel < relend; rel ++) 1348 { 1349 reloc_howto_type *howto; 1350 unsigned long r_symndx; 1351 Elf_Internal_Sym *sym; 1352 asection *sec; 1353 struct elf_link_hash_entry *h; 1354 bfd_vma relocation; 1355 bfd_reloc_status_type r; 1356 const char *name = NULL; 1357 int r_type; 1358 bfd_boolean undefined_signalled = FALSE; 1359 1360 r_type = ELF64_R_TYPE (rel->r_info); 1361 1362 if (r_type == R_MMIX_GNU_VTINHERIT 1363 || r_type == R_MMIX_GNU_VTENTRY) 1364 continue; 1365 1366 r_symndx = ELF64_R_SYM (rel->r_info); 1367 1368 if (info->relocatable) 1369 { 1370 /* This is a relocatable link. For most relocs we don't have to 1371 change anything, unless the reloc is against a section 1372 symbol, in which case we have to adjust according to where 1373 the section symbol winds up in the output section. */ 1374 if (r_symndx < symtab_hdr->sh_info) 1375 { 1376 sym = local_syms + r_symndx; 1377 1378 if (ELF_ST_TYPE (sym->st_info) == STT_SECTION) 1379 { 1380 sec = local_sections [r_symndx]; 1381 rel->r_addend += sec->output_offset + sym->st_value; 1382 } 1383 } 1384 1385 /* For PUSHJ stub relocs however, we may need to change the 1386 reloc and the section contents, if the reloc doesn't reach 1387 beyond the end of the output section and previous stubs. 1388 Then we change the section contents to be a PUSHJ to the end 1389 of the input section plus stubs (we can do that without using 1390 a reloc), and then we change the reloc to be a R_MMIX_PUSHJ 1391 at the stub location. */ 1392 if (r_type == R_MMIX_PUSHJ_STUBBABLE) 1393 { 1394 /* We've already checked whether we need a stub; use that 1395 knowledge. */ 1396 if (mmix_elf_section_data (input_section)->pjs.stub_size[pjsno] 1397 != 0) 1398 { 1399 Elf_Internal_Rela relcpy; 1400 1401 if (mmix_elf_section_data (input_section) 1402 ->pjs.stub_size[pjsno] != MAX_PUSHJ_STUB_SIZE) 1403 abort (); 1404 1405 /* There's already a PUSHJ insn there, so just fill in 1406 the offset bits to the stub. */ 1407 if (mmix_final_link_relocate (elf_mmix_howto_table 1408 + R_MMIX_ADDR19, 1409 input_section, 1410 contents, 1411 rel->r_offset, 1412 0, 1413 input_section 1414 ->output_section->vma 1415 + input_section->output_offset 1416 + size 1417 + mmix_elf_section_data (input_section) 1418 ->pjs.stub_offset, 1419 NULL, NULL) != bfd_reloc_ok) 1420 return FALSE; 1421 1422 /* Put a JMP insn at the stub; it goes with the 1423 R_MMIX_JMP reloc. */ 1424 bfd_put_32 (output_bfd, JMP_INSN_BYTE << 24, 1425 contents 1426 + size 1427 + mmix_elf_section_data (input_section) 1428 ->pjs.stub_offset); 1429 1430 /* Change the reloc to be at the stub, and to a full 1431 R_MMIX_JMP reloc. */ 1432 rel->r_info = ELF64_R_INFO (r_symndx, R_MMIX_JMP); 1433 rel->r_offset 1434 = (size 1435 + mmix_elf_section_data (input_section) 1436 ->pjs.stub_offset); 1437 1438 mmix_elf_section_data (input_section)->pjs.stub_offset 1439 += MAX_PUSHJ_STUB_SIZE; 1440 1441 /* Shift this reloc to the end of the relocs to maintain 1442 the r_offset sorted reloc order. */ 1443 relcpy = *rel; 1444 memmove (rel, rel + 1, (char *) relend - (char *) rel); 1445 relend[-1] = relcpy; 1446 1447 /* Back up one reloc, or else we'd skip the next reloc 1448 in turn. */ 1449 rel--; 1450 } 1451 1452 pjsno++; 1453 } 1454 continue; 1455 } 1456 1457 /* This is a final link. */ 1458 howto = elf_mmix_howto_table + ELF64_R_TYPE (rel->r_info); 1459 h = NULL; 1460 sym = NULL; 1461 sec = NULL; 1462 1463 if (r_symndx < symtab_hdr->sh_info) 1464 { 1465 sym = local_syms + r_symndx; 1466 sec = local_sections [r_symndx]; 1467 relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel); 1468 1469 name = bfd_elf_string_from_elf_section (input_bfd, 1470 symtab_hdr->sh_link, 1471 sym->st_name); 1472 if (name == NULL) 1473 name = bfd_section_name (input_bfd, sec); 1474 } 1475 else 1476 { 1477 bfd_boolean unresolved_reloc; 1478 1479 RELOC_FOR_GLOBAL_SYMBOL (info, input_bfd, input_section, rel, 1480 r_symndx, symtab_hdr, sym_hashes, 1481 h, sec, relocation, 1482 unresolved_reloc, undefined_signalled); 1483 name = h->root.root.string; 1484 } 1485 1486 r = mmix_final_link_relocate (howto, input_section, 1487 contents, rel->r_offset, 1488 rel->r_addend, relocation, name, sec); 1489 1490 if (r != bfd_reloc_ok) 1491 { 1492 bfd_boolean check_ok = TRUE; 1493 const char * msg = (const char *) NULL; 1494 1495 switch (r) 1496 { 1497 case bfd_reloc_overflow: 1498 check_ok = info->callbacks->reloc_overflow 1499 (info, (h ? &h->root : NULL), name, howto->name, 1500 (bfd_vma) 0, input_bfd, input_section, rel->r_offset); 1501 break; 1502 1503 case bfd_reloc_undefined: 1504 /* We may have sent this message above. */ 1505 if (! undefined_signalled) 1506 check_ok = info->callbacks->undefined_symbol 1507 (info, name, input_bfd, input_section, rel->r_offset, 1508 TRUE); 1509 undefined_signalled = TRUE; 1510 break; 1511 1512 case bfd_reloc_outofrange: 1513 msg = _("internal error: out of range error"); 1514 break; 1515 1516 case bfd_reloc_notsupported: 1517 msg = _("internal error: unsupported relocation error"); 1518 break; 1519 1520 case bfd_reloc_dangerous: 1521 msg = _("internal error: dangerous relocation"); 1522 break; 1523 1524 default: 1525 msg = _("internal error: unknown error"); 1526 break; 1527 } 1528 1529 if (msg) 1530 check_ok = info->callbacks->warning 1531 (info, msg, name, input_bfd, input_section, rel->r_offset); 1532 1533 if (! check_ok) 1534 return FALSE; 1535 } 1536 } 1537 1538 return TRUE; 1539} 1540 1541/* Perform a single relocation. By default we use the standard BFD 1542 routines. A few relocs we have to do ourselves. */ 1543 1544static bfd_reloc_status_type 1545mmix_final_link_relocate (howto, input_section, contents, 1546 r_offset, r_addend, relocation, symname, symsec) 1547 reloc_howto_type *howto; 1548 asection *input_section; 1549 bfd_byte *contents; 1550 bfd_vma r_offset; 1551 bfd_signed_vma r_addend; 1552 bfd_vma relocation; 1553 const char *symname; 1554 asection *symsec; 1555{ 1556 bfd_reloc_status_type r = bfd_reloc_ok; 1557 bfd_vma addr 1558 = (input_section->output_section->vma 1559 + input_section->output_offset 1560 + r_offset); 1561 bfd_signed_vma srel 1562 = (bfd_signed_vma) relocation + r_addend; 1563 1564 switch (howto->type) 1565 { 1566 /* All these are PC-relative. */ 1567 case R_MMIX_PUSHJ_STUBBABLE: 1568 case R_MMIX_PUSHJ: 1569 case R_MMIX_CBRANCH: 1570 case R_MMIX_ADDR19: 1571 case R_MMIX_GETA: 1572 case R_MMIX_ADDR27: 1573 case R_MMIX_JMP: 1574 contents += r_offset; 1575 1576 srel -= (input_section->output_section->vma 1577 + input_section->output_offset 1578 + r_offset); 1579 1580 r = mmix_elf_perform_relocation (input_section, howto, contents, 1581 addr, srel); 1582 break; 1583 1584 case R_MMIX_BASE_PLUS_OFFSET: 1585 if (symsec == NULL) 1586 return bfd_reloc_undefined; 1587 1588 /* Check that we're not relocating against a register symbol. */ 1589 if (strcmp (bfd_get_section_name (symsec->owner, symsec), 1590 MMIX_REG_CONTENTS_SECTION_NAME) == 0 1591 || strcmp (bfd_get_section_name (symsec->owner, symsec), 1592 MMIX_REG_SECTION_NAME) == 0) 1593 { 1594 /* Note: This is separated out into two messages in order 1595 to ease the translation into other languages. */ 1596 if (symname == NULL || *symname == 0) 1597 (*_bfd_error_handler) 1598 (_("%s: base-plus-offset relocation against register symbol: (unknown) in %s"), 1599 bfd_get_filename (input_section->owner), 1600 bfd_get_section_name (symsec->owner, symsec)); 1601 else 1602 (*_bfd_error_handler) 1603 (_("%s: base-plus-offset relocation against register symbol: %s in %s"), 1604 bfd_get_filename (input_section->owner), symname, 1605 bfd_get_section_name (symsec->owner, symsec)); 1606 return bfd_reloc_overflow; 1607 } 1608 goto do_mmix_reloc; 1609 1610 case R_MMIX_REG_OR_BYTE: 1611 case R_MMIX_REG: 1612 /* For now, we handle these alike. They must refer to an register 1613 symbol, which is either relative to the register section and in 1614 the range 0..255, or is in the register contents section with vma 1615 regno * 8. */ 1616 1617 /* FIXME: A better way to check for reg contents section? 1618 FIXME: Postpone section->scaling to mmix_elf_perform_relocation? */ 1619 if (symsec == NULL) 1620 return bfd_reloc_undefined; 1621 1622 if (strcmp (bfd_get_section_name (symsec->owner, symsec), 1623 MMIX_REG_CONTENTS_SECTION_NAME) == 0) 1624 { 1625 if ((srel & 7) != 0 || srel < 32*8 || srel > 255*8) 1626 { 1627 /* The bfd_reloc_outofrange return value, though intuitively 1628 a better value, will not get us an error. */ 1629 return bfd_reloc_overflow; 1630 } 1631 srel /= 8; 1632 } 1633 else if (strcmp (bfd_get_section_name (symsec->owner, symsec), 1634 MMIX_REG_SECTION_NAME) == 0) 1635 { 1636 if (srel < 0 || srel > 255) 1637 /* The bfd_reloc_outofrange return value, though intuitively a 1638 better value, will not get us an error. */ 1639 return bfd_reloc_overflow; 1640 } 1641 else 1642 { 1643 /* Note: This is separated out into two messages in order 1644 to ease the translation into other languages. */ 1645 if (symname == NULL || *symname == 0) 1646 (*_bfd_error_handler) 1647 (_("%s: register relocation against non-register symbol: (unknown) in %s"), 1648 bfd_get_filename (input_section->owner), 1649 bfd_get_section_name (symsec->owner, symsec)); 1650 else 1651 (*_bfd_error_handler) 1652 (_("%s: register relocation against non-register symbol: %s in %s"), 1653 bfd_get_filename (input_section->owner), symname, 1654 bfd_get_section_name (symsec->owner, symsec)); 1655 1656 /* The bfd_reloc_outofrange return value, though intuitively a 1657 better value, will not get us an error. */ 1658 return bfd_reloc_overflow; 1659 } 1660 do_mmix_reloc: 1661 contents += r_offset; 1662 r = mmix_elf_perform_relocation (input_section, howto, contents, 1663 addr, srel); 1664 break; 1665 1666 case R_MMIX_LOCAL: 1667 /* This isn't a real relocation, it's just an assertion that the 1668 final relocation value corresponds to a local register. We 1669 ignore the actual relocation; nothing is changed. */ 1670 { 1671 asection *regsec 1672 = bfd_get_section_by_name (input_section->output_section->owner, 1673 MMIX_REG_CONTENTS_SECTION_NAME); 1674 bfd_vma first_global; 1675 1676 /* Check that this is an absolute value, or a reference to the 1677 register contents section or the register (symbol) section. 1678 Absolute numbers can get here as undefined section. Undefined 1679 symbols are signalled elsewhere, so there's no conflict in us 1680 accidentally handling it. */ 1681 if (!bfd_is_abs_section (symsec) 1682 && !bfd_is_und_section (symsec) 1683 && strcmp (bfd_get_section_name (symsec->owner, symsec), 1684 MMIX_REG_CONTENTS_SECTION_NAME) != 0 1685 && strcmp (bfd_get_section_name (symsec->owner, symsec), 1686 MMIX_REG_SECTION_NAME) != 0) 1687 { 1688 (*_bfd_error_handler) 1689 (_("%s: directive LOCAL valid only with a register or absolute value"), 1690 bfd_get_filename (input_section->owner)); 1691 1692 return bfd_reloc_overflow; 1693 } 1694 1695 /* If we don't have a register contents section, then $255 is the 1696 first global register. */ 1697 if (regsec == NULL) 1698 first_global = 255; 1699 else 1700 { 1701 first_global = bfd_get_section_vma (abfd, regsec) / 8; 1702 if (strcmp (bfd_get_section_name (symsec->owner, symsec), 1703 MMIX_REG_CONTENTS_SECTION_NAME) == 0) 1704 { 1705 if ((srel & 7) != 0 || srel < 32*8 || srel > 255*8) 1706 /* The bfd_reloc_outofrange return value, though 1707 intuitively a better value, will not get us an error. */ 1708 return bfd_reloc_overflow; 1709 srel /= 8; 1710 } 1711 } 1712 1713 if ((bfd_vma) srel >= first_global) 1714 { 1715 /* FIXME: Better error message. */ 1716 (*_bfd_error_handler) 1717 (_("%s: LOCAL directive: Register $%ld is not a local register. First global register is $%ld."), 1718 bfd_get_filename (input_section->owner), (long) srel, (long) first_global); 1719 1720 return bfd_reloc_overflow; 1721 } 1722 } 1723 r = bfd_reloc_ok; 1724 break; 1725 1726 default: 1727 r = _bfd_final_link_relocate (howto, input_section->owner, input_section, 1728 contents, r_offset, 1729 relocation, r_addend); 1730 } 1731 1732 return r; 1733} 1734 1735/* Return the section that should be marked against GC for a given 1736 relocation. */ 1737 1738static asection * 1739mmix_elf_gc_mark_hook (asection *sec, 1740 struct bfd_link_info *info, 1741 Elf_Internal_Rela *rel, 1742 struct elf_link_hash_entry *h, 1743 Elf_Internal_Sym *sym) 1744{ 1745 if (h != NULL) 1746 switch (ELF64_R_TYPE (rel->r_info)) 1747 { 1748 case R_MMIX_GNU_VTINHERIT: 1749 case R_MMIX_GNU_VTENTRY: 1750 return NULL; 1751 } 1752 1753 return _bfd_elf_gc_mark_hook (sec, info, rel, h, sym); 1754} 1755 1756/* Update relocation info for a GC-excluded section. We could supposedly 1757 perform the allocation after GC, but there's no suitable hook between 1758 GC (or section merge) and the point when all input sections must be 1759 present. Better to waste some memory and (perhaps) a little time. */ 1760 1761static bfd_boolean 1762mmix_elf_gc_sweep_hook (bfd *abfd ATTRIBUTE_UNUSED, 1763 struct bfd_link_info *info ATTRIBUTE_UNUSED, 1764 asection *sec, 1765 const Elf_Internal_Rela *relocs ATTRIBUTE_UNUSED) 1766{ 1767 struct bpo_reloc_section_info *bpodata 1768 = mmix_elf_section_data (sec)->bpo.reloc; 1769 asection *allocated_gregs_section; 1770 1771 /* If no bpodata here, we have nothing to do. */ 1772 if (bpodata == NULL) 1773 return TRUE; 1774 1775 allocated_gregs_section = bpodata->bpo_greg_section; 1776 1777 mmix_elf_section_data (allocated_gregs_section)->bpo.greg->n_bpo_relocs 1778 -= bpodata->n_bpo_relocs_this_section; 1779 1780 return TRUE; 1781} 1782 1783/* Sort register relocs to come before expanding relocs. */ 1784 1785static int 1786mmix_elf_sort_relocs (p1, p2) 1787 const PTR p1; 1788 const PTR p2; 1789{ 1790 const Elf_Internal_Rela *r1 = (const Elf_Internal_Rela *) p1; 1791 const Elf_Internal_Rela *r2 = (const Elf_Internal_Rela *) p2; 1792 int r1_is_reg, r2_is_reg; 1793 1794 /* Sort primarily on r_offset & ~3, so relocs are done to consecutive 1795 insns. */ 1796 if ((r1->r_offset & ~(bfd_vma) 3) > (r2->r_offset & ~(bfd_vma) 3)) 1797 return 1; 1798 else if ((r1->r_offset & ~(bfd_vma) 3) < (r2->r_offset & ~(bfd_vma) 3)) 1799 return -1; 1800 1801 r1_is_reg 1802 = (ELF64_R_TYPE (r1->r_info) == R_MMIX_REG_OR_BYTE 1803 || ELF64_R_TYPE (r1->r_info) == R_MMIX_REG); 1804 r2_is_reg 1805 = (ELF64_R_TYPE (r2->r_info) == R_MMIX_REG_OR_BYTE 1806 || ELF64_R_TYPE (r2->r_info) == R_MMIX_REG); 1807 if (r1_is_reg != r2_is_reg) 1808 return r2_is_reg - r1_is_reg; 1809 1810 /* Neither or both are register relocs. Then sort on full offset. */ 1811 if (r1->r_offset > r2->r_offset) 1812 return 1; 1813 else if (r1->r_offset < r2->r_offset) 1814 return -1; 1815 return 0; 1816} 1817 1818/* Subset of mmix_elf_check_relocs, common to ELF and mmo linking. */ 1819 1820static bfd_boolean 1821mmix_elf_check_common_relocs (abfd, info, sec, relocs) 1822 bfd *abfd; 1823 struct bfd_link_info *info; 1824 asection *sec; 1825 const Elf_Internal_Rela *relocs; 1826{ 1827 bfd *bpo_greg_owner = NULL; 1828 asection *allocated_gregs_section = NULL; 1829 struct bpo_greg_section_info *gregdata = NULL; 1830 struct bpo_reloc_section_info *bpodata = NULL; 1831 const Elf_Internal_Rela *rel; 1832 const Elf_Internal_Rela *rel_end; 1833 1834 /* We currently have to abuse this COFF-specific member, since there's 1835 no target-machine-dedicated member. There's no alternative outside 1836 the bfd_link_info struct; we can't specialize a hash-table since 1837 they're different between ELF and mmo. */ 1838 bpo_greg_owner = (bfd *) info->base_file; 1839 1840 rel_end = relocs + sec->reloc_count; 1841 for (rel = relocs; rel < rel_end; rel++) 1842 { 1843 switch (ELF64_R_TYPE (rel->r_info)) 1844 { 1845 /* This relocation causes a GREG allocation. We need to count 1846 them, and we need to create a section for them, so we need an 1847 object to fake as the owner of that section. We can't use 1848 the ELF dynobj for this, since the ELF bits assume lots of 1849 DSO-related stuff if that member is non-NULL. */ 1850 case R_MMIX_BASE_PLUS_OFFSET: 1851 /* We don't do anything with this reloc for a relocatable link. */ 1852 if (info->relocatable) 1853 break; 1854 1855 if (bpo_greg_owner == NULL) 1856 { 1857 bpo_greg_owner = abfd; 1858 info->base_file = (PTR) bpo_greg_owner; 1859 } 1860 1861 if (allocated_gregs_section == NULL) 1862 allocated_gregs_section 1863 = bfd_get_section_by_name (bpo_greg_owner, 1864 MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME); 1865 1866 if (allocated_gregs_section == NULL) 1867 { 1868 allocated_gregs_section 1869 = bfd_make_section_with_flags (bpo_greg_owner, 1870 MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME, 1871 (SEC_HAS_CONTENTS 1872 | SEC_IN_MEMORY 1873 | SEC_LINKER_CREATED)); 1874 /* Setting both SEC_ALLOC and SEC_LOAD means the section is 1875 treated like any other section, and we'd get errors for 1876 address overlap with the text section. Let's set none of 1877 those flags, as that is what currently happens for usual 1878 GREG allocations, and that works. */ 1879 if (allocated_gregs_section == NULL 1880 || !bfd_set_section_alignment (bpo_greg_owner, 1881 allocated_gregs_section, 1882 3)) 1883 return FALSE; 1884 1885 gregdata = (struct bpo_greg_section_info *) 1886 bfd_zalloc (bpo_greg_owner, sizeof (struct bpo_greg_section_info)); 1887 if (gregdata == NULL) 1888 return FALSE; 1889 mmix_elf_section_data (allocated_gregs_section)->bpo.greg 1890 = gregdata; 1891 } 1892 else if (gregdata == NULL) 1893 gregdata 1894 = mmix_elf_section_data (allocated_gregs_section)->bpo.greg; 1895 1896 /* Get ourselves some auxiliary info for the BPO-relocs. */ 1897 if (bpodata == NULL) 1898 { 1899 /* No use doing a separate iteration pass to find the upper 1900 limit - just use the number of relocs. */ 1901 bpodata = (struct bpo_reloc_section_info *) 1902 bfd_alloc (bpo_greg_owner, 1903 sizeof (struct bpo_reloc_section_info) 1904 * (sec->reloc_count + 1)); 1905 if (bpodata == NULL) 1906 return FALSE; 1907 mmix_elf_section_data (sec)->bpo.reloc = bpodata; 1908 bpodata->first_base_plus_offset_reloc 1909 = bpodata->bpo_index 1910 = gregdata->n_max_bpo_relocs; 1911 bpodata->bpo_greg_section 1912 = allocated_gregs_section; 1913 bpodata->n_bpo_relocs_this_section = 0; 1914 } 1915 1916 bpodata->n_bpo_relocs_this_section++; 1917 gregdata->n_max_bpo_relocs++; 1918 1919 /* We don't get another chance to set this before GC; we've not 1920 set up any hook that runs before GC. */ 1921 gregdata->n_bpo_relocs 1922 = gregdata->n_max_bpo_relocs; 1923 break; 1924 1925 case R_MMIX_PUSHJ_STUBBABLE: 1926 mmix_elf_section_data (sec)->pjs.n_pushj_relocs++; 1927 break; 1928 } 1929 } 1930 1931 /* Allocate per-reloc stub storage and initialize it to the max stub 1932 size. */ 1933 if (mmix_elf_section_data (sec)->pjs.n_pushj_relocs != 0) 1934 { 1935 size_t i; 1936 1937 mmix_elf_section_data (sec)->pjs.stub_size 1938 = bfd_alloc (abfd, mmix_elf_section_data (sec)->pjs.n_pushj_relocs 1939 * sizeof (mmix_elf_section_data (sec) 1940 ->pjs.stub_size[0])); 1941 if (mmix_elf_section_data (sec)->pjs.stub_size == NULL) 1942 return FALSE; 1943 1944 for (i = 0; i < mmix_elf_section_data (sec)->pjs.n_pushj_relocs; i++) 1945 mmix_elf_section_data (sec)->pjs.stub_size[i] = MAX_PUSHJ_STUB_SIZE; 1946 } 1947 1948 return TRUE; 1949} 1950 1951/* Look through the relocs for a section during the first phase. */ 1952 1953static bfd_boolean 1954mmix_elf_check_relocs (abfd, info, sec, relocs) 1955 bfd *abfd; 1956 struct bfd_link_info *info; 1957 asection *sec; 1958 const Elf_Internal_Rela *relocs; 1959{ 1960 Elf_Internal_Shdr *symtab_hdr; 1961 struct elf_link_hash_entry **sym_hashes, **sym_hashes_end; 1962 const Elf_Internal_Rela *rel; 1963 const Elf_Internal_Rela *rel_end; 1964 1965 symtab_hdr = &elf_tdata (abfd)->symtab_hdr; 1966 sym_hashes = elf_sym_hashes (abfd); 1967 sym_hashes_end = sym_hashes + symtab_hdr->sh_size/sizeof(Elf64_External_Sym); 1968 if (!elf_bad_symtab (abfd)) 1969 sym_hashes_end -= symtab_hdr->sh_info; 1970 1971 /* First we sort the relocs so that any register relocs come before 1972 expansion-relocs to the same insn. FIXME: Not done for mmo. */ 1973 qsort ((PTR) relocs, sec->reloc_count, sizeof (Elf_Internal_Rela), 1974 mmix_elf_sort_relocs); 1975 1976 /* Do the common part. */ 1977 if (!mmix_elf_check_common_relocs (abfd, info, sec, relocs)) 1978 return FALSE; 1979 1980 if (info->relocatable) 1981 return TRUE; 1982 1983 rel_end = relocs + sec->reloc_count; 1984 for (rel = relocs; rel < rel_end; rel++) 1985 { 1986 struct elf_link_hash_entry *h; 1987 unsigned long r_symndx; 1988 1989 r_symndx = ELF64_R_SYM (rel->r_info); 1990 if (r_symndx < symtab_hdr->sh_info) 1991 h = NULL; 1992 else 1993 { 1994 h = sym_hashes[r_symndx - symtab_hdr->sh_info]; 1995 while (h->root.type == bfd_link_hash_indirect 1996 || h->root.type == bfd_link_hash_warning) 1997 h = (struct elf_link_hash_entry *) h->root.u.i.link; 1998 } 1999 2000 switch (ELF64_R_TYPE (rel->r_info)) 2001 { 2002 /* This relocation describes the C++ object vtable hierarchy. 2003 Reconstruct it for later use during GC. */ 2004 case R_MMIX_GNU_VTINHERIT: 2005 if (!bfd_elf_gc_record_vtinherit (abfd, sec, h, rel->r_offset)) 2006 return FALSE; 2007 break; 2008 2009 /* This relocation describes which C++ vtable entries are actually 2010 used. Record for later use during GC. */ 2011 case R_MMIX_GNU_VTENTRY: 2012 if (!bfd_elf_gc_record_vtentry (abfd, sec, h, rel->r_addend)) 2013 return FALSE; 2014 break; 2015 } 2016 } 2017 2018 return TRUE; 2019} 2020 2021/* Wrapper for mmix_elf_check_common_relocs, called when linking to mmo. 2022 Copied from elf_link_add_object_symbols. */ 2023 2024bfd_boolean 2025_bfd_mmix_check_all_relocs (abfd, info) 2026 bfd *abfd; 2027 struct bfd_link_info *info; 2028{ 2029 asection *o; 2030 2031 for (o = abfd->sections; o != NULL; o = o->next) 2032 { 2033 Elf_Internal_Rela *internal_relocs; 2034 bfd_boolean ok; 2035 2036 if ((o->flags & SEC_RELOC) == 0 2037 || o->reloc_count == 0 2038 || ((info->strip == strip_all || info->strip == strip_debugger) 2039 && (o->flags & SEC_DEBUGGING) != 0) 2040 || bfd_is_abs_section (o->output_section)) 2041 continue; 2042 2043 internal_relocs 2044 = _bfd_elf_link_read_relocs (abfd, o, (PTR) NULL, 2045 (Elf_Internal_Rela *) NULL, 2046 info->keep_memory); 2047 if (internal_relocs == NULL) 2048 return FALSE; 2049 2050 ok = mmix_elf_check_common_relocs (abfd, info, o, internal_relocs); 2051 2052 if (! info->keep_memory) 2053 free (internal_relocs); 2054 2055 if (! ok) 2056 return FALSE; 2057 } 2058 2059 return TRUE; 2060} 2061 2062/* Change symbols relative to the reg contents section to instead be to 2063 the register section, and scale them down to correspond to the register 2064 number. */ 2065 2066static bfd_boolean 2067mmix_elf_link_output_symbol_hook (info, name, sym, input_sec, h) 2068 struct bfd_link_info *info ATTRIBUTE_UNUSED; 2069 const char *name ATTRIBUTE_UNUSED; 2070 Elf_Internal_Sym *sym; 2071 asection *input_sec; 2072 struct elf_link_hash_entry *h ATTRIBUTE_UNUSED; 2073{ 2074 if (input_sec != NULL 2075 && input_sec->name != NULL 2076 && ELF_ST_TYPE (sym->st_info) != STT_SECTION 2077 && strcmp (input_sec->name, MMIX_REG_CONTENTS_SECTION_NAME) == 0) 2078 { 2079 sym->st_value /= 8; 2080 sym->st_shndx = SHN_REGISTER; 2081 } 2082 2083 return TRUE; 2084} 2085 2086/* We fake a register section that holds values that are register numbers. 2087 Having a SHN_REGISTER and register section translates better to other 2088 formats (e.g. mmo) than for example a STT_REGISTER attribute. 2089 This section faking is based on a construct in elf32-mips.c. */ 2090static asection mmix_elf_reg_section; 2091static asymbol mmix_elf_reg_section_symbol; 2092static asymbol *mmix_elf_reg_section_symbol_ptr; 2093 2094/* Handle the special section numbers that a symbol may use. */ 2095 2096void 2097mmix_elf_symbol_processing (abfd, asym) 2098 bfd *abfd ATTRIBUTE_UNUSED; 2099 asymbol *asym; 2100{ 2101 elf_symbol_type *elfsym; 2102 2103 elfsym = (elf_symbol_type *) asym; 2104 switch (elfsym->internal_elf_sym.st_shndx) 2105 { 2106 case SHN_REGISTER: 2107 if (mmix_elf_reg_section.name == NULL) 2108 { 2109 /* Initialize the register section. */ 2110 mmix_elf_reg_section.name = MMIX_REG_SECTION_NAME; 2111 mmix_elf_reg_section.flags = SEC_NO_FLAGS; 2112 mmix_elf_reg_section.output_section = &mmix_elf_reg_section; 2113 mmix_elf_reg_section.symbol = &mmix_elf_reg_section_symbol; 2114 mmix_elf_reg_section.symbol_ptr_ptr = &mmix_elf_reg_section_symbol_ptr; 2115 mmix_elf_reg_section_symbol.name = MMIX_REG_SECTION_NAME; 2116 mmix_elf_reg_section_symbol.flags = BSF_SECTION_SYM; 2117 mmix_elf_reg_section_symbol.section = &mmix_elf_reg_section; 2118 mmix_elf_reg_section_symbol_ptr = &mmix_elf_reg_section_symbol; 2119 } 2120 asym->section = &mmix_elf_reg_section; 2121 break; 2122 2123 default: 2124 break; 2125 } 2126} 2127 2128/* Given a BFD section, try to locate the corresponding ELF section 2129 index. */ 2130 2131static bfd_boolean 2132mmix_elf_section_from_bfd_section (abfd, sec, retval) 2133 bfd * abfd ATTRIBUTE_UNUSED; 2134 asection * sec; 2135 int * retval; 2136{ 2137 if (strcmp (bfd_get_section_name (abfd, sec), MMIX_REG_SECTION_NAME) == 0) 2138 *retval = SHN_REGISTER; 2139 else 2140 return FALSE; 2141 2142 return TRUE; 2143} 2144 2145/* Hook called by the linker routine which adds symbols from an object 2146 file. We must handle the special SHN_REGISTER section number here. 2147 2148 We also check that we only have *one* each of the section-start 2149 symbols, since otherwise having two with the same value would cause 2150 them to be "merged", but with the contents serialized. */ 2151 2152bfd_boolean 2153mmix_elf_add_symbol_hook (abfd, info, sym, namep, flagsp, secp, valp) 2154 bfd *abfd; 2155 struct bfd_link_info *info ATTRIBUTE_UNUSED; 2156 Elf_Internal_Sym *sym; 2157 const char **namep ATTRIBUTE_UNUSED; 2158 flagword *flagsp ATTRIBUTE_UNUSED; 2159 asection **secp; 2160 bfd_vma *valp ATTRIBUTE_UNUSED; 2161{ 2162 if (sym->st_shndx == SHN_REGISTER) 2163 { 2164 *secp = bfd_make_section_old_way (abfd, MMIX_REG_SECTION_NAME); 2165 (*secp)->flags |= SEC_LINKER_CREATED; 2166 } 2167 else if ((*namep)[0] == '_' && (*namep)[1] == '_' && (*namep)[2] == '.' 2168 && CONST_STRNEQ (*namep, MMIX_LOC_SECTION_START_SYMBOL_PREFIX)) 2169 { 2170 /* See if we have another one. */ 2171 struct bfd_link_hash_entry *h = bfd_link_hash_lookup (info->hash, 2172 *namep, 2173 FALSE, 2174 FALSE, 2175 FALSE); 2176 2177 if (h != NULL && h->type != bfd_link_hash_undefined) 2178 { 2179 /* How do we get the asymbol (or really: the filename) from h? 2180 h->u.def.section->owner is NULL. */ 2181 ((*_bfd_error_handler) 2182 (_("%s: Error: multiple definition of `%s'; start of %s is set in a earlier linked file\n"), 2183 bfd_get_filename (abfd), *namep, 2184 *namep + strlen (MMIX_LOC_SECTION_START_SYMBOL_PREFIX))); 2185 bfd_set_error (bfd_error_bad_value); 2186 return FALSE; 2187 } 2188 } 2189 2190 return TRUE; 2191} 2192 2193/* We consider symbols matching "L.*:[0-9]+" to be local symbols. */ 2194 2195bfd_boolean 2196mmix_elf_is_local_label_name (abfd, name) 2197 bfd *abfd; 2198 const char *name; 2199{ 2200 const char *colpos; 2201 int digits; 2202 2203 /* Also include the default local-label definition. */ 2204 if (_bfd_elf_is_local_label_name (abfd, name)) 2205 return TRUE; 2206 2207 if (*name != 'L') 2208 return FALSE; 2209 2210 /* If there's no ":", or more than one, it's not a local symbol. */ 2211 colpos = strchr (name, ':'); 2212 if (colpos == NULL || strchr (colpos + 1, ':') != NULL) 2213 return FALSE; 2214 2215 /* Check that there are remaining characters and that they are digits. */ 2216 if (colpos[1] == 0) 2217 return FALSE; 2218 2219 digits = strspn (colpos + 1, "0123456789"); 2220 return digits != 0 && colpos[1 + digits] == 0; 2221} 2222 2223/* We get rid of the register section here. */ 2224 2225bfd_boolean 2226mmix_elf_final_link (abfd, info) 2227 bfd *abfd; 2228 struct bfd_link_info *info; 2229{ 2230 /* We never output a register section, though we create one for 2231 temporary measures. Check that nobody entered contents into it. */ 2232 asection *reg_section; 2233 2234 reg_section = bfd_get_section_by_name (abfd, MMIX_REG_SECTION_NAME); 2235 2236 if (reg_section != NULL) 2237 { 2238 /* FIXME: Pass error state gracefully. */ 2239 if (bfd_get_section_flags (abfd, reg_section) & SEC_HAS_CONTENTS) 2240 _bfd_abort (__FILE__, __LINE__, _("Register section has contents\n")); 2241 2242 /* Really remove the section, if it hasn't already been done. */ 2243 if (!bfd_section_removed_from_list (abfd, reg_section)) 2244 { 2245 bfd_section_list_remove (abfd, reg_section); 2246 --abfd->section_count; 2247 } 2248 } 2249 2250 if (! bfd_elf_final_link (abfd, info)) 2251 return FALSE; 2252 2253 /* Since this section is marked SEC_LINKER_CREATED, it isn't output by 2254 the regular linker machinery. We do it here, like other targets with 2255 special sections. */ 2256 if (info->base_file != NULL) 2257 { 2258 asection *greg_section 2259 = bfd_get_section_by_name ((bfd *) info->base_file, 2260 MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME); 2261 if (!bfd_set_section_contents (abfd, 2262 greg_section->output_section, 2263 greg_section->contents, 2264 (file_ptr) greg_section->output_offset, 2265 greg_section->size)) 2266 return FALSE; 2267 } 2268 return TRUE; 2269} 2270 2271/* We need to include the maximum size of PUSHJ-stubs in the initial 2272 section size. This is expected to shrink during linker relaxation. */ 2273 2274static void 2275mmix_set_relaxable_size (abfd, sec, ptr) 2276 bfd *abfd ATTRIBUTE_UNUSED; 2277 asection *sec; 2278 void *ptr; 2279{ 2280 struct bfd_link_info *info = ptr; 2281 2282 /* Make sure we only do this for section where we know we want this, 2283 otherwise we might end up resetting the size of COMMONs. */ 2284 if (mmix_elf_section_data (sec)->pjs.n_pushj_relocs == 0) 2285 return; 2286 2287 sec->rawsize = sec->size; 2288 sec->size += (mmix_elf_section_data (sec)->pjs.n_pushj_relocs 2289 * MAX_PUSHJ_STUB_SIZE); 2290 2291 /* For use in relocatable link, we start with a max stubs size. See 2292 mmix_elf_relax_section. */ 2293 if (info->relocatable && sec->output_section) 2294 mmix_elf_section_data (sec->output_section)->pjs.stubs_size_sum 2295 += (mmix_elf_section_data (sec)->pjs.n_pushj_relocs 2296 * MAX_PUSHJ_STUB_SIZE); 2297} 2298 2299/* Initialize stuff for the linker-generated GREGs to match 2300 R_MMIX_BASE_PLUS_OFFSET relocs seen by the linker. */ 2301 2302bfd_boolean 2303_bfd_mmix_before_linker_allocation (abfd, info) 2304 bfd *abfd ATTRIBUTE_UNUSED; 2305 struct bfd_link_info *info; 2306{ 2307 asection *bpo_gregs_section; 2308 bfd *bpo_greg_owner; 2309 struct bpo_greg_section_info *gregdata; 2310 size_t n_gregs; 2311 bfd_vma gregs_size; 2312 size_t i; 2313 size_t *bpo_reloc_indexes; 2314 bfd *ibfd; 2315 2316 /* Set the initial size of sections. */ 2317 for (ibfd = info->input_bfds; ibfd != NULL; ibfd = ibfd->link_next) 2318 bfd_map_over_sections (ibfd, mmix_set_relaxable_size, info); 2319 2320 /* The bpo_greg_owner bfd is supposed to have been set by 2321 mmix_elf_check_relocs when the first R_MMIX_BASE_PLUS_OFFSET is seen. 2322 If there is no such object, there was no R_MMIX_BASE_PLUS_OFFSET. */ 2323 bpo_greg_owner = (bfd *) info->base_file; 2324 if (bpo_greg_owner == NULL) 2325 return TRUE; 2326 2327 bpo_gregs_section 2328 = bfd_get_section_by_name (bpo_greg_owner, 2329 MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME); 2330 2331 if (bpo_gregs_section == NULL) 2332 return TRUE; 2333 2334 /* We use the target-data handle in the ELF section data. */ 2335 gregdata = mmix_elf_section_data (bpo_gregs_section)->bpo.greg; 2336 if (gregdata == NULL) 2337 return FALSE; 2338 2339 n_gregs = gregdata->n_bpo_relocs; 2340 gregdata->n_allocated_bpo_gregs = n_gregs; 2341 2342 /* When this reaches zero during relaxation, all entries have been 2343 filled in and the size of the linker gregs can be calculated. */ 2344 gregdata->n_remaining_bpo_relocs_this_relaxation_round = n_gregs; 2345 2346 /* Set the zeroth-order estimate for the GREGs size. */ 2347 gregs_size = n_gregs * 8; 2348 2349 if (!bfd_set_section_size (bpo_greg_owner, bpo_gregs_section, gregs_size)) 2350 return FALSE; 2351 2352 /* Allocate and set up the GREG arrays. They're filled in at relaxation 2353 time. Note that we must use the max number ever noted for the array, 2354 since the index numbers were created before GC. */ 2355 gregdata->reloc_request 2356 = bfd_zalloc (bpo_greg_owner, 2357 sizeof (struct bpo_reloc_request) 2358 * gregdata->n_max_bpo_relocs); 2359 2360 gregdata->bpo_reloc_indexes 2361 = bpo_reloc_indexes 2362 = bfd_alloc (bpo_greg_owner, 2363 gregdata->n_max_bpo_relocs 2364 * sizeof (size_t)); 2365 if (bpo_reloc_indexes == NULL) 2366 return FALSE; 2367 2368 /* The default order is an identity mapping. */ 2369 for (i = 0; i < gregdata->n_max_bpo_relocs; i++) 2370 { 2371 bpo_reloc_indexes[i] = i; 2372 gregdata->reloc_request[i].bpo_reloc_no = i; 2373 } 2374 2375 return TRUE; 2376} 2377 2378/* Fill in contents in the linker allocated gregs. Everything is 2379 calculated at this point; we just move the contents into place here. */ 2380 2381bfd_boolean 2382_bfd_mmix_after_linker_allocation (abfd, link_info) 2383 bfd *abfd ATTRIBUTE_UNUSED; 2384 struct bfd_link_info *link_info; 2385{ 2386 asection *bpo_gregs_section; 2387 bfd *bpo_greg_owner; 2388 struct bpo_greg_section_info *gregdata; 2389 size_t n_gregs; 2390 size_t i, j; 2391 size_t lastreg; 2392 bfd_byte *contents; 2393 2394 /* The bpo_greg_owner bfd is supposed to have been set by mmix_elf_check_relocs 2395 when the first R_MMIX_BASE_PLUS_OFFSET is seen. If there is no such 2396 object, there was no R_MMIX_BASE_PLUS_OFFSET. */ 2397 bpo_greg_owner = (bfd *) link_info->base_file; 2398 if (bpo_greg_owner == NULL) 2399 return TRUE; 2400 2401 bpo_gregs_section 2402 = bfd_get_section_by_name (bpo_greg_owner, 2403 MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME); 2404 2405 /* This can't happen without DSO handling. When DSOs are handled 2406 without any R_MMIX_BASE_PLUS_OFFSET seen, there will be no such 2407 section. */ 2408 if (bpo_gregs_section == NULL) 2409 return TRUE; 2410 2411 /* We use the target-data handle in the ELF section data. */ 2412 2413 gregdata = mmix_elf_section_data (bpo_gregs_section)->bpo.greg; 2414 if (gregdata == NULL) 2415 return FALSE; 2416 2417 n_gregs = gregdata->n_allocated_bpo_gregs; 2418 2419 bpo_gregs_section->contents 2420 = contents = bfd_alloc (bpo_greg_owner, bpo_gregs_section->size); 2421 if (contents == NULL) 2422 return FALSE; 2423 2424 /* Sanity check: If these numbers mismatch, some relocation has not been 2425 accounted for and the rest of gregdata is probably inconsistent. 2426 It's a bug, but it's more helpful to identify it than segfaulting 2427 below. */ 2428 if (gregdata->n_remaining_bpo_relocs_this_relaxation_round 2429 != gregdata->n_bpo_relocs) 2430 { 2431 (*_bfd_error_handler) 2432 (_("Internal inconsistency: remaining %u != max %u.\n\ 2433 Please report this bug."), 2434 gregdata->n_remaining_bpo_relocs_this_relaxation_round, 2435 gregdata->n_bpo_relocs); 2436 return FALSE; 2437 } 2438 2439 for (lastreg = 255, i = 0, j = 0; j < n_gregs; i++) 2440 if (gregdata->reloc_request[i].regindex != lastreg) 2441 { 2442 bfd_put_64 (bpo_greg_owner, gregdata->reloc_request[i].value, 2443 contents + j * 8); 2444 lastreg = gregdata->reloc_request[i].regindex; 2445 j++; 2446 } 2447 2448 return TRUE; 2449} 2450 2451/* Sort valid relocs to come before non-valid relocs, then on increasing 2452 value. */ 2453 2454static int 2455bpo_reloc_request_sort_fn (p1, p2) 2456 const PTR p1; 2457 const PTR p2; 2458{ 2459 const struct bpo_reloc_request *r1 = (const struct bpo_reloc_request *) p1; 2460 const struct bpo_reloc_request *r2 = (const struct bpo_reloc_request *) p2; 2461 2462 /* Primary function is validity; non-valid relocs sorted after valid 2463 ones. */ 2464 if (r1->valid != r2->valid) 2465 return r2->valid - r1->valid; 2466 2467 /* Then sort on value. Don't simplify and return just the difference of 2468 the values: the upper bits of the 64-bit value would be truncated on 2469 a host with 32-bit ints. */ 2470 if (r1->value != r2->value) 2471 return r1->value > r2->value ? 1 : -1; 2472 2473 /* As a last re-sort, use the relocation number, so we get a stable 2474 sort. The *addresses* aren't stable since items are swapped during 2475 sorting. It depends on the qsort implementation if this actually 2476 happens. */ 2477 return r1->bpo_reloc_no > r2->bpo_reloc_no 2478 ? 1 : (r1->bpo_reloc_no < r2->bpo_reloc_no ? -1 : 0); 2479} 2480 2481/* For debug use only. Dumps the global register allocations resulting 2482 from base-plus-offset relocs. */ 2483 2484void 2485mmix_dump_bpo_gregs (link_info, pf) 2486 struct bfd_link_info *link_info; 2487 bfd_error_handler_type pf; 2488{ 2489 bfd *bpo_greg_owner; 2490 asection *bpo_gregs_section; 2491 struct bpo_greg_section_info *gregdata; 2492 unsigned int i; 2493 2494 if (link_info == NULL || link_info->base_file == NULL) 2495 return; 2496 2497 bpo_greg_owner = (bfd *) link_info->base_file; 2498 2499 bpo_gregs_section 2500 = bfd_get_section_by_name (bpo_greg_owner, 2501 MMIX_LD_ALLOCATED_REG_CONTENTS_SECTION_NAME); 2502 2503 if (bpo_gregs_section == NULL) 2504 return; 2505 2506 gregdata = mmix_elf_section_data (bpo_gregs_section)->bpo.greg; 2507 if (gregdata == NULL) 2508 return; 2509 2510 if (pf == NULL) 2511 pf = _bfd_error_handler; 2512 2513 /* These format strings are not translated. They are for debug purposes 2514 only and never displayed to an end user. Should they escape, we 2515 surely want them in original. */ 2516 (*pf) (" n_bpo_relocs: %u\n n_max_bpo_relocs: %u\n n_remain...round: %u\n\ 2517 n_allocated_bpo_gregs: %u\n", gregdata->n_bpo_relocs, 2518 gregdata->n_max_bpo_relocs, 2519 gregdata->n_remaining_bpo_relocs_this_relaxation_round, 2520 gregdata->n_allocated_bpo_gregs); 2521 2522 if (gregdata->reloc_request) 2523 for (i = 0; i < gregdata->n_max_bpo_relocs; i++) 2524 (*pf) ("%4u (%4u)/%4u#%u: 0x%08lx%08lx r: %3u o: %3u\n", 2525 i, 2526 (gregdata->bpo_reloc_indexes != NULL 2527 ? gregdata->bpo_reloc_indexes[i] : (size_t) -1), 2528 gregdata->reloc_request[i].bpo_reloc_no, 2529 gregdata->reloc_request[i].valid, 2530 2531 (unsigned long) (gregdata->reloc_request[i].value >> 32), 2532 (unsigned long) gregdata->reloc_request[i].value, 2533 gregdata->reloc_request[i].regindex, 2534 gregdata->reloc_request[i].offset); 2535} 2536 2537/* This links all R_MMIX_BASE_PLUS_OFFSET relocs into a special array, and 2538 when the last such reloc is done, an index-array is sorted according to 2539 the values and iterated over to produce register numbers (indexed by 0 2540 from the first allocated register number) and offsets for use in real 2541 relocation. 2542 2543 PUSHJ stub accounting is also done here. 2544 2545 Symbol- and reloc-reading infrastructure copied from elf-m10200.c. */ 2546 2547static bfd_boolean 2548mmix_elf_relax_section (abfd, sec, link_info, again) 2549 bfd *abfd; 2550 asection *sec; 2551 struct bfd_link_info *link_info; 2552 bfd_boolean *again; 2553{ 2554 Elf_Internal_Shdr *symtab_hdr; 2555 Elf_Internal_Rela *internal_relocs; 2556 Elf_Internal_Rela *irel, *irelend; 2557 asection *bpo_gregs_section = NULL; 2558 struct bpo_greg_section_info *gregdata; 2559 struct bpo_reloc_section_info *bpodata 2560 = mmix_elf_section_data (sec)->bpo.reloc; 2561 /* The initialization is to quiet compiler warnings. The value is to 2562 spot a missing actual initialization. */ 2563 size_t bpono = (size_t) -1; 2564 size_t pjsno = 0; 2565 bfd *bpo_greg_owner; 2566 Elf_Internal_Sym *isymbuf = NULL; 2567 bfd_size_type size = sec->rawsize ? sec->rawsize : sec->size; 2568 2569 mmix_elf_section_data (sec)->pjs.stubs_size_sum = 0; 2570 2571 /* Assume nothing changes. */ 2572 *again = FALSE; 2573 2574 /* We don't have to do anything if this section does not have relocs, or 2575 if this is not a code section. */ 2576 if ((sec->flags & SEC_RELOC) == 0 2577 || sec->reloc_count == 0 2578 || (sec->flags & SEC_CODE) == 0 2579 || (sec->flags & SEC_LINKER_CREATED) != 0 2580 /* If no R_MMIX_BASE_PLUS_OFFSET relocs and no PUSHJ-stub relocs, 2581 then nothing to do. */ 2582 || (bpodata == NULL 2583 && mmix_elf_section_data (sec)->pjs.n_pushj_relocs == 0)) 2584 return TRUE; 2585 2586 symtab_hdr = &elf_tdata (abfd)->symtab_hdr; 2587 2588 bpo_greg_owner = (bfd *) link_info->base_file; 2589 2590 if (bpodata != NULL) 2591 { 2592 bpo_gregs_section = bpodata->bpo_greg_section; 2593 gregdata = mmix_elf_section_data (bpo_gregs_section)->bpo.greg; 2594 bpono = bpodata->first_base_plus_offset_reloc; 2595 } 2596 else 2597 gregdata = NULL; 2598 2599 /* Get a copy of the native relocations. */ 2600 internal_relocs 2601 = _bfd_elf_link_read_relocs (abfd, sec, (PTR) NULL, 2602 (Elf_Internal_Rela *) NULL, 2603 link_info->keep_memory); 2604 if (internal_relocs == NULL) 2605 goto error_return; 2606 2607 /* Walk through them looking for relaxing opportunities. */ 2608 irelend = internal_relocs + sec->reloc_count; 2609 for (irel = internal_relocs; irel < irelend; irel++) 2610 { 2611 bfd_vma symval; 2612 struct elf_link_hash_entry *h = NULL; 2613 2614 /* We only process two relocs. */ 2615 if (ELF64_R_TYPE (irel->r_info) != (int) R_MMIX_BASE_PLUS_OFFSET 2616 && ELF64_R_TYPE (irel->r_info) != (int) R_MMIX_PUSHJ_STUBBABLE) 2617 continue; 2618 2619 /* We process relocs in a distinctly different way when this is a 2620 relocatable link (for one, we don't look at symbols), so we avoid 2621 mixing its code with that for the "normal" relaxation. */ 2622 if (link_info->relocatable) 2623 { 2624 /* The only transformation in a relocatable link is to generate 2625 a full stub at the location of the stub calculated for the 2626 input section, if the relocated stub location, the end of the 2627 output section plus earlier stubs, cannot be reached. Thus 2628 relocatable linking can only lead to worse code, but it still 2629 works. */ 2630 if (ELF64_R_TYPE (irel->r_info) == R_MMIX_PUSHJ_STUBBABLE) 2631 { 2632 /* If we can reach the end of the output-section and beyond 2633 any current stubs, then we don't need a stub for this 2634 reloc. The relaxed order of output stub allocation may 2635 not exactly match the straightforward order, so we always 2636 assume presence of output stubs, which will allow 2637 relaxation only on relocations indifferent to the 2638 presence of output stub allocations for other relocations 2639 and thus the order of output stub allocation. */ 2640 if (bfd_check_overflow (complain_overflow_signed, 2641 19, 2642 0, 2643 bfd_arch_bits_per_address (abfd), 2644 /* Output-stub location. */ 2645 sec->output_section->rawsize 2646 + (mmix_elf_section_data (sec 2647 ->output_section) 2648 ->pjs.stubs_size_sum) 2649 /* Location of this PUSHJ reloc. */ 2650 - (sec->output_offset + irel->r_offset) 2651 /* Don't count *this* stub twice. */ 2652 - (mmix_elf_section_data (sec) 2653 ->pjs.stub_size[pjsno] 2654 + MAX_PUSHJ_STUB_SIZE)) 2655 == bfd_reloc_ok) 2656 mmix_elf_section_data (sec)->pjs.stub_size[pjsno] = 0; 2657 2658 mmix_elf_section_data (sec)->pjs.stubs_size_sum 2659 += mmix_elf_section_data (sec)->pjs.stub_size[pjsno]; 2660 2661 pjsno++; 2662 } 2663 2664 continue; 2665 } 2666 2667 /* Get the value of the symbol referred to by the reloc. */ 2668 if (ELF64_R_SYM (irel->r_info) < symtab_hdr->sh_info) 2669 { 2670 /* A local symbol. */ 2671 Elf_Internal_Sym *isym; 2672 asection *sym_sec; 2673 2674 /* Read this BFD's local symbols if we haven't already. */ 2675 if (isymbuf == NULL) 2676 { 2677 isymbuf = (Elf_Internal_Sym *) symtab_hdr->contents; 2678 if (isymbuf == NULL) 2679 isymbuf = bfd_elf_get_elf_syms (abfd, symtab_hdr, 2680 symtab_hdr->sh_info, 0, 2681 NULL, NULL, NULL); 2682 if (isymbuf == 0) 2683 goto error_return; 2684 } 2685 2686 isym = isymbuf + ELF64_R_SYM (irel->r_info); 2687 if (isym->st_shndx == SHN_UNDEF) 2688 sym_sec = bfd_und_section_ptr; 2689 else if (isym->st_shndx == SHN_ABS) 2690 sym_sec = bfd_abs_section_ptr; 2691 else if (isym->st_shndx == SHN_COMMON) 2692 sym_sec = bfd_com_section_ptr; 2693 else 2694 sym_sec = bfd_section_from_elf_index (abfd, isym->st_shndx); 2695 symval = (isym->st_value 2696 + sym_sec->output_section->vma 2697 + sym_sec->output_offset); 2698 } 2699 else 2700 { 2701 unsigned long indx; 2702 2703 /* An external symbol. */ 2704 indx = ELF64_R_SYM (irel->r_info) - symtab_hdr->sh_info; 2705 h = elf_sym_hashes (abfd)[indx]; 2706 BFD_ASSERT (h != NULL); 2707 if (h->root.type != bfd_link_hash_defined 2708 && h->root.type != bfd_link_hash_defweak) 2709 { 2710 /* This appears to be a reference to an undefined symbol. Just 2711 ignore it--it will be caught by the regular reloc processing. 2712 We need to keep BPO reloc accounting consistent, though 2713 else we'll abort instead of emitting an error message. */ 2714 if (ELF64_R_TYPE (irel->r_info) == R_MMIX_BASE_PLUS_OFFSET 2715 && gregdata != NULL) 2716 { 2717 gregdata->n_remaining_bpo_relocs_this_relaxation_round--; 2718 bpono++; 2719 } 2720 continue; 2721 } 2722 2723 symval = (h->root.u.def.value 2724 + h->root.u.def.section->output_section->vma 2725 + h->root.u.def.section->output_offset); 2726 } 2727 2728 if (ELF64_R_TYPE (irel->r_info) == (int) R_MMIX_PUSHJ_STUBBABLE) 2729 { 2730 bfd_vma value = symval + irel->r_addend; 2731 bfd_vma dot 2732 = (sec->output_section->vma 2733 + sec->output_offset 2734 + irel->r_offset); 2735 bfd_vma stubaddr 2736 = (sec->output_section->vma 2737 + sec->output_offset 2738 + size 2739 + mmix_elf_section_data (sec)->pjs.stubs_size_sum); 2740 2741 if ((value & 3) == 0 2742 && bfd_check_overflow (complain_overflow_signed, 2743 19, 2744 0, 2745 bfd_arch_bits_per_address (abfd), 2746 value - dot 2747 - (value > dot 2748 ? mmix_elf_section_data (sec) 2749 ->pjs.stub_size[pjsno] 2750 : 0)) 2751 == bfd_reloc_ok) 2752 /* If the reloc fits, no stub is needed. */ 2753 mmix_elf_section_data (sec)->pjs.stub_size[pjsno] = 0; 2754 else 2755 /* Maybe we can get away with just a JMP insn? */ 2756 if ((value & 3) == 0 2757 && bfd_check_overflow (complain_overflow_signed, 2758 27, 2759 0, 2760 bfd_arch_bits_per_address (abfd), 2761 value - stubaddr 2762 - (value > dot 2763 ? mmix_elf_section_data (sec) 2764 ->pjs.stub_size[pjsno] - 4 2765 : 0)) 2766 == bfd_reloc_ok) 2767 /* Yep, account for a stub consisting of a single JMP insn. */ 2768 mmix_elf_section_data (sec)->pjs.stub_size[pjsno] = 4; 2769 else 2770 /* Nope, go for the full insn stub. It doesn't seem useful to 2771 emit the intermediate sizes; those will only be useful for 2772 a >64M program assuming contiguous code. */ 2773 mmix_elf_section_data (sec)->pjs.stub_size[pjsno] 2774 = MAX_PUSHJ_STUB_SIZE; 2775 2776 mmix_elf_section_data (sec)->pjs.stubs_size_sum 2777 += mmix_elf_section_data (sec)->pjs.stub_size[pjsno]; 2778 pjsno++; 2779 continue; 2780 } 2781 2782 /* We're looking at a R_MMIX_BASE_PLUS_OFFSET reloc. */ 2783 2784 gregdata->reloc_request[gregdata->bpo_reloc_indexes[bpono]].value 2785 = symval + irel->r_addend; 2786 gregdata->reloc_request[gregdata->bpo_reloc_indexes[bpono++]].valid = TRUE; 2787 gregdata->n_remaining_bpo_relocs_this_relaxation_round--; 2788 } 2789 2790 /* Check if that was the last BPO-reloc. If so, sort the values and 2791 calculate how many registers we need to cover them. Set the size of 2792 the linker gregs, and if the number of registers changed, indicate 2793 that we need to relax some more because we have more work to do. */ 2794 if (gregdata != NULL 2795 && gregdata->n_remaining_bpo_relocs_this_relaxation_round == 0) 2796 { 2797 size_t i; 2798 bfd_vma prev_base; 2799 size_t regindex; 2800 2801 /* First, reset the remaining relocs for the next round. */ 2802 gregdata->n_remaining_bpo_relocs_this_relaxation_round 2803 = gregdata->n_bpo_relocs; 2804 2805 qsort ((PTR) gregdata->reloc_request, 2806 gregdata->n_max_bpo_relocs, 2807 sizeof (struct bpo_reloc_request), 2808 bpo_reloc_request_sort_fn); 2809 2810 /* Recalculate indexes. When we find a change (however unlikely 2811 after the initial iteration), we know we need to relax again, 2812 since items in the GREG-array are sorted by increasing value and 2813 stored in the relaxation phase. */ 2814 for (i = 0; i < gregdata->n_max_bpo_relocs; i++) 2815 if (gregdata->bpo_reloc_indexes[gregdata->reloc_request[i].bpo_reloc_no] 2816 != i) 2817 { 2818 gregdata->bpo_reloc_indexes[gregdata->reloc_request[i].bpo_reloc_no] 2819 = i; 2820 *again = TRUE; 2821 } 2822 2823 /* Allocate register numbers (indexing from 0). Stop at the first 2824 non-valid reloc. */ 2825 for (i = 0, regindex = 0, prev_base = gregdata->reloc_request[0].value; 2826 i < gregdata->n_bpo_relocs; 2827 i++) 2828 { 2829 if (gregdata->reloc_request[i].value > prev_base + 255) 2830 { 2831 regindex++; 2832 prev_base = gregdata->reloc_request[i].value; 2833 } 2834 gregdata->reloc_request[i].regindex = regindex; 2835 gregdata->reloc_request[i].offset 2836 = gregdata->reloc_request[i].value - prev_base; 2837 } 2838 2839 /* If it's not the same as the last time, we need to relax again, 2840 because the size of the section has changed. I'm not sure we 2841 actually need to do any adjustments since the shrinking happens 2842 at the start of this section, but better safe than sorry. */ 2843 if (gregdata->n_allocated_bpo_gregs != regindex + 1) 2844 { 2845 gregdata->n_allocated_bpo_gregs = regindex + 1; 2846 *again = TRUE; 2847 } 2848 2849 bpo_gregs_section->size = (regindex + 1) * 8; 2850 } 2851 2852 if (isymbuf != NULL && (unsigned char *) isymbuf != symtab_hdr->contents) 2853 { 2854 if (! link_info->keep_memory) 2855 free (isymbuf); 2856 else 2857 { 2858 /* Cache the symbols for elf_link_input_bfd. */ 2859 symtab_hdr->contents = (unsigned char *) isymbuf; 2860 } 2861 } 2862 2863 if (internal_relocs != NULL 2864 && elf_section_data (sec)->relocs != internal_relocs) 2865 free (internal_relocs); 2866 2867 if (sec->size < size + mmix_elf_section_data (sec)->pjs.stubs_size_sum) 2868 abort (); 2869 2870 if (sec->size > size + mmix_elf_section_data (sec)->pjs.stubs_size_sum) 2871 { 2872 sec->size = size + mmix_elf_section_data (sec)->pjs.stubs_size_sum; 2873 *again = TRUE; 2874 } 2875 2876 return TRUE; 2877 2878 error_return: 2879 if (isymbuf != NULL && (unsigned char *) isymbuf != symtab_hdr->contents) 2880 free (isymbuf); 2881 if (internal_relocs != NULL 2882 && elf_section_data (sec)->relocs != internal_relocs) 2883 free (internal_relocs); 2884 return FALSE; 2885} 2886 2887#define ELF_ARCH bfd_arch_mmix 2888#define ELF_MACHINE_CODE EM_MMIX 2889 2890/* According to mmix-doc page 36 (paragraph 45), this should be (1LL << 48LL). 2891 However, that's too much for something somewhere in the linker part of 2892 BFD; perhaps the start-address has to be a non-zero multiple of this 2893 number, or larger than this number. The symptom is that the linker 2894 complains: "warning: allocated section `.text' not in segment". We 2895 settle for 64k; the page-size used in examples is 8k. 2896 #define ELF_MAXPAGESIZE 0x10000 2897 2898 Unfortunately, this causes excessive padding in the supposedly small 2899 for-education programs that are the expected usage (where people would 2900 inspect output). We stick to 256 bytes just to have *some* default 2901 alignment. */ 2902#define ELF_MAXPAGESIZE 0x100 2903 2904#define TARGET_BIG_SYM bfd_elf64_mmix_vec 2905#define TARGET_BIG_NAME "elf64-mmix" 2906 2907#define elf_info_to_howto_rel NULL 2908#define elf_info_to_howto mmix_info_to_howto_rela 2909#define elf_backend_relocate_section mmix_elf_relocate_section 2910#define elf_backend_gc_mark_hook mmix_elf_gc_mark_hook 2911#define elf_backend_gc_sweep_hook mmix_elf_gc_sweep_hook 2912 2913#define elf_backend_link_output_symbol_hook \ 2914 mmix_elf_link_output_symbol_hook 2915#define elf_backend_add_symbol_hook mmix_elf_add_symbol_hook 2916 2917#define elf_backend_check_relocs mmix_elf_check_relocs 2918#define elf_backend_symbol_processing mmix_elf_symbol_processing 2919#define elf_backend_omit_section_dynsym \ 2920 ((bfd_boolean (*) (bfd *, struct bfd_link_info *, asection *)) bfd_true) 2921 2922#define bfd_elf64_bfd_is_local_label_name \ 2923 mmix_elf_is_local_label_name 2924 2925#define elf_backend_may_use_rel_p 0 2926#define elf_backend_may_use_rela_p 1 2927#define elf_backend_default_use_rela_p 1 2928 2929#define elf_backend_can_gc_sections 1 2930#define elf_backend_section_from_bfd_section \ 2931 mmix_elf_section_from_bfd_section 2932 2933#define bfd_elf64_new_section_hook mmix_elf_new_section_hook 2934#define bfd_elf64_bfd_final_link mmix_elf_final_link 2935#define bfd_elf64_bfd_relax_section mmix_elf_relax_section 2936 2937#include "elf64-target.h" 2938