1#!/bin/bash
2# SPDX-License-Identifier: GPL-2.0
3
4# This test sends traffic from H1 to H2. Either on ingress of $swp1, or on
5# egress of $swp2, the traffic is acted upon by an action skbedit priority. The
6# new priority should be taken into account when classifying traffic on the PRIO
7# qdisc at $swp2. The test verifies that for different priority values, the
8# traffic ends up in expected PRIO band.
9#
10# +----------------------+                             +----------------------+
11# | H1                   |                             |                   H2 |
12# |    + $h1             |                             |            $h2 +     |
13# |    | 192.0.2.1/28    |                             |   192.0.2.2/28 |     |
14# +----|-----------------+                             +----------------|-----+
15#      |                                                                |
16# +----|----------------------------------------------------------------|-----+
17# | SW |                                                                |     |
18# |  +-|----------------------------------------------------------------|-+   |
19# |  | + $swp1                       BR                           $swp2 + |   |
20# |  |                                                             PRIO   |   |
21# |  +--------------------------------------------------------------------+   |
22# +---------------------------------------------------------------------------+
23
24ALL_TESTS="
25	ping_ipv4
26	test_ingress
27	test_egress
28"
29
30NUM_NETIFS=4
31source lib.sh
32
33: ${HIT_TIMEOUT:=2000} # ms
34
35h1_create()
36{
37	simple_if_init $h1 192.0.2.1/28
38}
39
40h1_destroy()
41{
42	simple_if_fini $h1 192.0.2.1/28
43}
44
45h2_create()
46{
47	simple_if_init $h2 192.0.2.2/28
48}
49
50h2_destroy()
51{
52	simple_if_fini $h2 192.0.2.2/28
53}
54
55switch_create()
56{
57	ip link add name br1 type bridge vlan_filtering 1
58	ip link set dev br1 addrgenmode none
59	ip link set dev br1 up
60	ip link set dev $swp1 master br1
61	ip link set dev $swp1 up
62	ip link set dev $swp2 master br1
63	ip link set dev $swp2 up
64
65	tc qdisc add dev $swp1 clsact
66	tc qdisc add dev $swp2 clsact
67	tc qdisc add dev $swp2 root handle 10: \
68	   prio bands 8 priomap 7 6 5 4 3 2 1 0
69}
70
71switch_destroy()
72{
73	tc qdisc del dev $swp2 root
74	tc qdisc del dev $swp2 clsact
75	tc qdisc del dev $swp1 clsact
76
77	ip link set dev $swp2 down
78	ip link set dev $swp2 nomaster
79	ip link set dev $swp1 down
80	ip link set dev $swp1 nomaster
81	ip link del dev br1
82}
83
84setup_prepare()
85{
86	h1=${NETIFS[p1]}
87	swp1=${NETIFS[p2]}
88
89	swp2=${NETIFS[p3]}
90	h2=${NETIFS[p4]}
91
92	h2mac=$(mac_get $h2)
93
94	vrf_prepare
95	h1_create
96	h2_create
97	switch_create
98}
99
100cleanup()
101{
102	pre_cleanup
103
104	switch_destroy
105	h2_destroy
106	h1_destroy
107	vrf_cleanup
108}
109
110ping_ipv4()
111{
112	ping_test $h1 192.0.2.2
113}
114
115test_skbedit_priority_one()
116{
117	local locus=$1; shift
118	local prio=$1; shift
119	local classid=$1; shift
120
121	RET=0
122
123	tc filter add $locus handle 101 pref 1 \
124	   flower action skbedit priority $prio
125
126	local pkt0=$(qdisc_parent_stats_get $swp2 $classid .packets)
127	local pkt2=$(tc_rule_handle_stats_get "$locus" 101)
128	$MZ $h1 -t udp "sp=54321,dp=12345" -c 10 -d 20msec -p 100 \
129	    -a own -b $h2mac -A 192.0.2.1 -B 192.0.2.2 -q
130
131	local pkt1
132	pkt1=$(busywait "$HIT_TIMEOUT" until_counter_is ">= $((pkt0 + 10))" \
133			qdisc_parent_stats_get $swp2 $classid .packets)
134	check_err $? "Expected to get 10 packets on class $classid, but got $((pkt1 - pkt0))."
135
136	local pkt3=$(tc_rule_handle_stats_get "$locus" 101)
137	((pkt3 >= pkt2 + 10))
138	check_err $? "Expected to get 10 packets on skbedit rule but got $((pkt3 - pkt2))."
139
140	log_test "$locus skbedit priority $prio -> classid $classid"
141
142	tc filter del $locus pref 1
143}
144
145test_ingress()
146{
147	local prio
148
149	for prio in {0..7}; do
150		test_skbedit_priority_one "dev $swp1 ingress" \
151					  $prio 10:$((8 - prio))
152	done
153}
154
155test_egress()
156{
157	local prio
158
159	for prio in {0..7}; do
160		test_skbedit_priority_one "dev $swp2 egress" \
161					  $prio 10:$((8 - prio))
162	done
163}
164
165trap cleanup EXIT
166
167setup_prepare
168setup_wait
169
170tests_run
171
172exit $EXIT_STATUS
173