1/***************************************************************************
2
3   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
4   All rights reserved
5   www.echoaudio.com
6
7   This file is part of Echo Digital Audio's generic driver library.
8
9   Echo Digital Audio's generic driver library is free software;
10   you can redistribute it and/or modify it under the terms of
11   the GNU General Public License as published by the Free Software
12   Foundation.
13
14   This program is distributed in the hope that it will be useful,
15   but WITHOUT ANY WARRANTY; without even the implied warranty of
16   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17   GNU General Public License for more details.
18
19   You should have received a copy of the GNU General Public License
20   along with this program; if not, write to the Free Software
21   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
22   MA  02111-1307, USA.
23
24   *************************************************************************
25
26 Translation from C++ and adaptation for use in ALSA-Driver
27 were made by Giuliano Pochini <pochini@shiny.it>
28
29****************************************************************************/
30
31
32static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
33{
34	int err;
35
36	if (snd_BUG_ON((subdevice_id & 0xfff0) != DARLA24))
37		return -ENODEV;
38
39	err = init_dsp_comm_page(chip);
40	if (err) {
41		dev_err(chip->card->dev,
42			"init_hw: could not initialize DSP comm page\n");
43		return err;
44	}
45
46	chip->device_id = device_id;
47	chip->subdevice_id = subdevice_id;
48	chip->bad_board = true;
49	chip->dsp_code_to_load = FW_DARLA24_DSP;
50	/* Since this card has no ASIC, mark it as loaded so everything
51	   works OK */
52	chip->asic_loaded = true;
53	chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL |
54		ECHO_CLOCK_BIT_ESYNC;
55
56	err = load_firmware(chip);
57	if (err < 0)
58		return err;
59	chip->bad_board = false;
60
61	return err;
62}
63
64
65
66static int set_mixer_defaults(struct echoaudio *chip)
67{
68	return init_line_levels(chip);
69}
70
71
72
73static u32 detect_input_clocks(const struct echoaudio *chip)
74{
75	u32 clocks_from_dsp, clock_bits;
76
77	/* Map the DSP clock detect bits to the generic driver clock
78	   detect bits */
79	clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
80
81	clock_bits = ECHO_CLOCK_BIT_INTERNAL;
82
83	if (clocks_from_dsp & GLDM_CLOCK_DETECT_BIT_ESYNC)
84		clock_bits |= ECHO_CLOCK_BIT_ESYNC;
85
86	return clock_bits;
87}
88
89
90
91/* The Darla24 has no ASIC. Just do nothing */
92static int load_asic(struct echoaudio *chip)
93{
94	return 0;
95}
96
97
98
99static int set_sample_rate(struct echoaudio *chip, u32 rate)
100{
101	u8 clock;
102
103	switch (rate) {
104	case 96000:
105		clock = GD24_96000;
106		break;
107	case 88200:
108		clock = GD24_88200;
109		break;
110	case 48000:
111		clock = GD24_48000;
112		break;
113	case 44100:
114		clock = GD24_44100;
115		break;
116	case 32000:
117		clock = GD24_32000;
118		break;
119	case 22050:
120		clock = GD24_22050;
121		break;
122	case 16000:
123		clock = GD24_16000;
124		break;
125	case 11025:
126		clock = GD24_11025;
127		break;
128	case 8000:
129		clock = GD24_8000;
130		break;
131	default:
132		dev_err(chip->card->dev,
133			"set_sample_rate: Error, invalid sample rate %d\n",
134			rate);
135		return -EINVAL;
136	}
137
138	if (wait_handshake(chip))
139		return -EIO;
140
141	dev_dbg(chip->card->dev,
142		"set_sample_rate: %d clock %d\n", rate, clock);
143	chip->sample_rate = rate;
144
145	/* Override the sample rate if this card is set to Echo sync. */
146	if (chip->input_clock == ECHO_CLOCK_ESYNC)
147		clock = GD24_EXT_SYNC;
148
149	chip->comm_page->sample_rate = cpu_to_le32(rate);	/* ignored by the DSP ? */
150	chip->comm_page->gd_clock_state = clock;
151	clear_handshake(chip);
152	return send_vector(chip, DSP_VC_SET_GD_AUDIO_STATE);
153}
154
155
156
157static int set_input_clock(struct echoaudio *chip, u16 clock)
158{
159	if (snd_BUG_ON(clock != ECHO_CLOCK_INTERNAL &&
160		       clock != ECHO_CLOCK_ESYNC))
161		return -EINVAL;
162	chip->input_clock = clock;
163	return set_sample_rate(chip, chip->sample_rate);
164}
165
166