1/*
2 * T104xQDS Device Tree Source
3 *
4 * Copyright 2013 - 2015 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *     * Redistributions of source code must retain the above copyright
9 *	 notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above copyright
11 *	 notice, this list of conditions and the following disclaimer in the
12 *	 documentation and/or other materials provided with the distribution.
13 *     * Neither the name of Freescale Semiconductor nor the
14 *	 names of its contributors may be used to endorse or promote products
15 *	 derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35/ {
36	model = "fsl,T1040QDS";
37	#address-cells = <2>;
38	#size-cells = <2>;
39	interrupt-parent = <&mpic>;
40
41	aliases {
42		emi1_rgmii0 = &t1040mdio0;
43		emi1_rgmii1 = &t1040mdio1;
44		emi1_slot3 = &t1040mdio3;
45		emi1_slot5 = &t1040mdio5;
46		emi1_slot6 = &t1040mdio6;
47		emi1_slot7 = &t1040mdio7;
48		rgmii_phy1 = &rgmii_phy1;
49		rgmii_phy2 = &rgmii_phy2;
50		phy_s3_01 = &phy_s3_01;
51		phy_s3_02 = &phy_s3_02;
52		phy_s3_03 = &phy_s3_03;
53		phy_s3_04 = &phy_s3_04;
54		phy_s5_01 = &phy_s5_01;
55		phy_s5_02 = &phy_s5_02;
56		phy_s5_03 = &phy_s5_03;
57		phy_s5_04 = &phy_s5_04;
58		phy_s6_01 = &phy_s6_01;
59		phy_s6_02 = &phy_s6_02;
60		phy_s6_03 = &phy_s6_03;
61		phy_s6_04 = &phy_s6_04;
62		phy_s7_01 = &phy_s7_01;
63		phy_s7_02 = &phy_s7_02;
64		phy_s7_03 = &phy_s7_03;
65		phy_s7_04 = &phy_s7_04;
66	};
67
68	reserved-memory {
69		#address-cells = <2>;
70		#size-cells = <2>;
71		ranges;
72
73		bman_fbpr: bman-fbpr {
74			size = <0 0x1000000>;
75			alignment = <0 0x1000000>;
76		};
77		qman_fqd: qman-fqd {
78			size = <0 0x400000>;
79			alignment = <0 0x400000>;
80		};
81		qman_pfdr: qman-pfdr {
82			size = <0 0x2000000>;
83			alignment = <0 0x2000000>;
84		};
85	};
86
87	ifc: localbus@ffe124000 {
88		reg = <0xf 0xfe124000 0 0x2000>;
89		ranges = <0 0 0xf 0xe8000000 0x08000000
90			  2 0 0xf 0xff800000 0x00010000
91			  3 0 0xf 0xffdf0000 0x00008000>;
92
93		nor@0,0 {
94			#address-cells = <1>;
95			#size-cells = <1>;
96			compatible = "cfi-flash";
97			reg = <0x0 0x0 0x8000000>;
98
99			bank-width = <2>;
100			device-width = <1>;
101		};
102
103		nand@2,0 {
104			#address-cells = <1>;
105			#size-cells = <1>;
106			compatible = "fsl,ifc-nand";
107			reg = <0x2 0x0 0x10000>;
108		};
109
110		board-control@3,0 {
111			#address-cells = <1>;
112			#size-cells = <1>;
113			compatible = "fsl,fpga-qixis";
114			reg = <3 0 0x300>;
115			ranges = <0 3 0 0x300>;
116
117			mdio-mux-emi1 {
118				#address-cells = <1>;
119				#size-cells = <0>;
120				compatible = "mdio-mux-mmioreg", "mdio-mux";
121				mdio-parent-bus = <&mdio0>;
122				reg = <0x54 1>;
123				mux-mask = <0xe0>;
124
125				t1040mdio0: mdio@0 {
126					#address-cells = <1>;
127					#size-cells = <0>;
128					reg = <0x00>;
129					status = "disabled";
130
131					rgmii_phy1: ethernet-phy@1 {
132						reg = <0x1>;
133					};
134				};
135
136				t1040mdio1: mdio@20 {
137					#address-cells = <1>;
138					#size-cells = <0>;
139					reg = <0x20>;
140					status = "disabled";
141
142					rgmii_phy2: ethernet-phy@2 {
143						reg = <0x2>;
144					};
145				};
146
147				t1040mdio3: mdio@60 {
148					#address-cells = <1>;
149					#size-cells = <0>;
150					reg = <0x60>;
151					status = "disabled";
152
153					phy_s3_01: ethernet-phy@1c {
154						reg = <0x1c>;
155					};
156
157					phy_s3_02: ethernet-phy@1d {
158						reg = <0x1d>;
159					};
160
161					phy_s3_03: ethernet-phy@1e {
162						reg = <0x1e>;
163					};
164
165					phy_s3_04: ethernet-phy@1f {
166						reg = <0x1f>;
167					};
168				};
169
170				t1040mdio5: mdio@a0 {
171					#address-cells = <1>;
172					#size-cells = <0>;
173					reg = <0xa0>;
174
175					phy_s5_01: ethernet-phy@1c {
176						reg = <0x14>;
177					};
178
179					phy_s5_02: ethernet-phy@1d {
180						reg = <0x15>;
181					};
182
183					phy_s5_03: ethernet-phy@1e {
184						reg = <0x16>;
185					};
186
187					phy_s5_04: ethernet-phy@1f {
188						reg = <0x17>;
189					};
190				};
191
192				t1040mdio6: mdio@c0 {
193					#address-cells = <1>;
194					#size-cells = <0>;
195					reg = <0xc0>;
196
197					phy_s6_01: ethernet-phy@1c {
198						reg = <0x18>;
199					};
200
201					phy_s6_02: ethernet-phy@1d {
202						reg = <0x19>;
203					};
204
205					phy_s6_03: ethernet-phy@1e {
206						reg = <0x1a>;
207					};
208
209					phy_s6_04: ethernet-phy@1f {
210						reg = <0x1b>;
211					};
212				};
213
214				t1040mdio7: mdio@e0 {
215					#address-cells = <1>;
216					#size-cells = <0>;
217					reg = <0xe0>;
218					status = "disabled";
219
220					phy_s7_01: ethernet-phy@1c {
221						reg = <0x1c>;
222					};
223
224					phy_s7_02: ethernet-phy@1d {
225						reg = <0x1d>;
226					};
227
228					phy_s7_03: ethernet-phy@1e {
229						reg = <0x1e>;
230					};
231
232					phy_s7_04: ethernet-phy@1f {
233						reg = <0x1f>;
234					};
235				};
236			};
237		};
238	};
239
240	memory {
241		device_type = "memory";
242	};
243
244	dcsr: dcsr@f00000000 {
245		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
246	};
247
248	bportals: bman-portals@ff4000000 {
249		ranges = <0x0 0xf 0xf4000000 0x2000000>;
250	};
251
252	qportals: qman-portals@ff6000000 {
253		ranges = <0x0 0xf 0xf6000000 0x2000000>;
254	};
255
256	soc: soc@ffe000000 {
257		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
258		reg = <0xf 0xfe000000 0 0x00001000>;
259
260		spi@110000 {
261			flash@0 {
262				#address-cells = <1>;
263				#size-cells = <1>;
264				compatible = "micron,n25q128a11", "jedec,spi-nor";
265				reg = <0>;
266				spi-max-frequency = <10000000>; /* input clock */
267			};
268		};
269
270		i2c@118000 {
271			i2c-mux@77 {
272				compatible = "nxp,pca9547";
273				reg = <0x77>;
274			};
275			rtc@68 {
276				compatible = "dallas,ds3232";
277				reg = <0x68>;
278				interrupts = <0x1 0x1 0 0>;
279			};
280		};
281
282		fman@400000 {
283			ethernet@e0000 {
284				fixed-link = <0 1 1000 0 0>;
285				phy-connection-type = "sgmii";
286			};
287
288			ethernet@e2000 {
289				fixed-link = <1 1 1000 0 0>;
290				phy-connection-type = "sgmii";
291			};
292
293			ethernet@e4000 {
294				phy-handle = <&phy_s7_03>;
295				phy-connection-type = "sgmii";
296			};
297
298			ethernet@e6000 {
299				phy-handle = <&rgmii_phy1>;
300				phy-connection-type = "rgmii";
301			};
302
303			ethernet@e8000 {
304				phy-handle = <&rgmii_phy2>;
305				phy-connection-type = "rgmii";
306			};
307		};
308	};
309
310	pci0: pcie@ffe240000 {
311		reg = <0xf 0xfe240000 0 0x10000>;
312		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x10000000
313			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
314		pcie@0 {
315			ranges = <0x02000000 0 0xe0000000
316				  0x02000000 0 0xe0000000
317				  0 0x10000000
318
319				  0x01000000 0 0x00000000
320				  0x01000000 0 0x00000000
321				  0 0x00010000>;
322		};
323	};
324
325	pci1: pcie@ffe250000 {
326		reg = <0xf 0xfe250000 0 0x10000>;
327		ranges = <0x02000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000
328			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
329		pcie@0 {
330			ranges = <0x02000000 0 0xe0000000
331				  0x02000000 0 0xe0000000
332				  0 0x10000000
333
334				  0x01000000 0 0x00000000
335				  0x01000000 0 0x00000000
336				  0 0x00010000>;
337		};
338	};
339
340	pci2: pcie@ffe260000 {
341		reg = <0xf 0xfe260000 0 0x10000>;
342		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
343			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
344		pcie@0 {
345			ranges = <0x02000000 0 0xe0000000
346				  0x02000000 0 0xe0000000
347				  0 0x10000000
348
349				  0x01000000 0 0x00000000
350				  0x01000000 0 0x00000000
351				  0 0x00010000>;
352		};
353	};
354
355	pci3: pcie@ffe270000 {
356		reg = <0xf 0xfe270000 0 0x10000>;
357		ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
358			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
359		pcie@0 {
360			ranges = <0x02000000 0 0xe0000000
361				  0x02000000 0 0xe0000000
362				  0 0x10000000
363
364				  0x01000000 0 0x00000000
365				  0x01000000 0 0x00000000
366				  0 0x00010000>;
367		};
368	};
369
370	qe: qe@ffe140000 {
371		ranges = <0x0 0xf 0xfe140000 0x40000>;
372		reg = <0xf 0xfe140000 0 0x480>;
373		brg-frequency = <0>;
374		bus-frequency = <0>;
375
376		si1: si@700 {
377			compatible = "fsl,t1040-qe-si";
378			reg = <0x700 0x80>;
379		};
380
381		siram1: siram@1000 {
382			compatible = "fsl,t1040-qe-siram";
383			reg = <0x1000 0x800>;
384		};
385
386		ucc_hdlc: ucc@2000 {
387			compatible = "fsl,ucc-hdlc";
388			rx-clock-name = "clk8";
389			tx-clock-name = "clk9";
390			fsl,rx-sync-clock = "rsync_pin";
391			fsl,tx-sync-clock = "tsync_pin";
392			fsl,tx-timeslot-mask = <0xfffffffe>;
393			fsl,rx-timeslot-mask = <0xfffffffe>;
394			fsl,tdm-framer-type = "e1";
395			fsl,tdm-id = <0>;
396			fsl,siram-entry-id = <0>;
397			fsl,tdm-interface;
398		};
399
400		ucc_serial: ucc@2200 {
401			compatible = "fsl,t1040-ucc-uart";
402			port-number = <0>;
403			rx-clock-name = "brg2";
404			tx-clock-name = "brg2";
405		};
406	};
407};
408